H. M. Rowson, Y. Wang, J. Yong, M. Kwauk, Y. Jin et al., Fluid Bed Adsorption of Carbon Disulfide Challenges in Fluidization, In Fluidization' 85 Adsorption: Building Upon a Solid Foundation, Chinese), pp.180-56, 1963.

M. A. Danielsson and V. Hudon, VOC Emission Control Using a fluidized-Bed Adsorption system. Metal Finishing, pp.89-91, 1994.

J. Slay, R. Goltz, B. Rainwater, and M. Danielsson, Volatile Organic Compound Emission Control Using a Fluidized Bed Adsorption System, International Environmental Conference, vol.2, pp.601-606, 1996.

E. L. Biedell, Hybrid VOC Control Technology Offers Best of Both Worlds, Metal Finishing, pp.24-26, 1997.

H. Cowles and N. Borenstein, Continuous VOC reduction in a fluidized bed adsorber using a new carbonaceous adsorbent, Proceedings of the Air & Waste Management Association's Annual Meeting & Exhibition, pp.96-100, 1996.

T. S. Pugsley, F. Berruti, and A. Chakma, Computer simulation of a novel circulating fluidized bed pressure-temperature swing adsorber for recovering carbon dioxide from flue gases, Chemical Engineering Science, vol.49, issue.24, pp.4465-4481, 1994.
DOI : 10.1016/S0009-2509(05)80033-8

R. T. Yang, Gs Separation by Adsorption Process, 1987.

D. Duong and . Do, Adsorption Analysis: Equilibria and Kinetics, 1998.

B. P. Bering, M. M. Dubinin, and V. V. Serpinsky, Theory of volume filling for vapor adsorption, Journal of Colloid and Interface Science, vol.21, issue.4, pp.378-393, 1966.
DOI : 10.1016/0095-8522(66)90004-3

B. P. Bering, M. M. Dubinin, and V. V. Serpinsky, On thermodynamics of adsorption in micropores, Journal of Colloid and Interface Science, vol.38, issue.1, p.185, 1972.
DOI : 10.1016/0021-9797(72)90233-0

H. A. Cornies and N. Borenstein, Continuous VOC Reduction in a Fluidized Bed Adsorber Using a New Carbonceous Adsorbent, 89th Annual Meeting & Exhibition, pp.96-100, 1996.

J. Choung, Y. Lee, D. Choi, and S. Kim, Adsorption Equilibria of Toluene on Polymeric Adsorbents, Journal of Chemical & Engineering Data, vol.46, issue.4, pp.954-958, 2001.
DOI : 10.1021/je000282i

H. Kitagawa and K. Suzuki, Fundamentals and Design of Adsorption Process, 1977.

L. Reh, J. Yerushalmi, D. H. Turner, and M. Squires, Fluidized Bed Processing The Fast Fluidized Bed, Chem. Eng. Prog. Ind. Eng. Chem. Pro. Des. Dev, vol.67, issue.151, p.47, 1971.

D. Geldart, Types of gas fluidization, Powder Technology, vol.7, issue.5, pp.285-292, 1973.
DOI : 10.1016/0032-5910(73)80037-3

J. C. Berggren, . Bjerle, H. Eklund, H. Karlsson, and . Svensson, 56 Application of chemical and physical operations in a circulating fluidized bed system, Chemical Engineering Science, vol.35, issue.1-2, pp.446-455, 1980.
DOI : 10.1016/0009-2509(80)80118-7

V. L. Schiller and A. Naumann, Uber die Grundlegenden Berechnungen bei der Schwerkraftaufbereitung, Z. Ver. Dtsch. Ing, vol.77, pp.318-320, 1933.

C. Y. Wen and Y. H. Yu, Mechanics of Fluidization, Chemical Engineering Progress Symposium Series, vol.66, pp.100-111, 1966.

J. Li, Multi-scale Modeling and Method of Energy Minimization in Two-phase Flow, Chinese), Ph.D. Dissertation, Institute of Chemical Metallurgy, 1987.

J. Li and M. Kwauk, METHOD OF ENERGY MINIMIZATION IN MULTI-SCALE MODELING OF PARTICLE-FLUID TWO-PHASE FLOW, pp.50-55, 1994.
DOI : 10.1016/B978-0-08-036225-0.50013-7

H. Arastoopour, C. Wang, and S. A. Weil, Particle???particle interaction force in a dilute gas???solid system, Chemical Engineering Science, vol.37, issue.9, pp.7-1379, 1982.
DOI : 10.1016/0009-2509(82)85010-0

T. M. Matsen, Mechanisms of Choking and Entrainment. Powder Technology, pp.21-33, 1982.

L. S. Lasdon, A. D. Waren, A. Jain, and M. Ratner, Design and Testing of a Generalized Reduced Gradient Code for Nonlinear Programming, ACM Transactions on Mathematical Software, vol.4, issue.1, p.34, 1978.
DOI : 10.1145/355769.355773

C. Cheng, Energy Minimized Multi-Scale Core-Annual Model for Circulating Fluidized Bed, Chinese ). Ph.D. DissertationO Institute of Process Engineering, Chinese Academy ofSciences DBeijing, 2001.

Y. Li and M. Kwauk, The Dynamics of Fast Fluidization, p.537, 1980.
DOI : 10.1007/978-1-4684-1045-7_57

C. Brereton and L. Stromberg, Sorne Aspects of the Fluid Dynamic Behavior of Fast Fluidized Beds In: Circulating Fluidized Bed Technology, p.133, 1985.

D. Bai, Y. Jin, Z. Yu, and J. Zhu, The axial distribution of the cross-sectionally averaged voidage in fast fluidized beds, Powder Technology, vol.71, issue.1, pp.51-57, 1992.
DOI : 10.1016/0032-5910(92)88003-Z

Y. Jing, Z. Yu, C. Qi, and D. Bai, The influence of exit Structures on the axial Distribution of Voidage in Fast Fluidized Bed, ln: Fluidization 88 -Science and Technology, p.165, 1988.

H. Weinstein, R. A. Graff, M. Meller, and M. J. Shao, The Influence of the lmposed Pressure Drop Across a Fat Fluidized Bed, p.299, 1983.

J. Li and H. Weinstein, An experimental comparison of gas backmixing in fluidized beds across the regime spectrum, Chemical Engineering Science, vol.44, issue.8, pp.1697-1704, 1989.
DOI : 10.1016/0009-2509(89)80011-9

S. Gao, Solid Circulating Rate and Axial Voidage Distribution in Fast Fluidized Bed, Chinese). M.S. DissertationDShenyang Research Institute of Chemical Industry, 1990.

G. L. Yang and J. K. Sun, Transition of flow Regime from Turbulent to Fast Fluidization and from Fast to Dilute Phase Transport, In: Fluidization'91 - Science and Technology, p.37, 1991.

D. Bai and K. Kato, Saturation carrying capacity of gas and flow regimes in CFB., JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, vol.28, issue.2, p.179, 1995.
DOI : 10.1252/jcej.28.179

R. L. Flemmer and C. L. Banks, On the drag coefficient of a sphere, Powder Technology, vol.48, issue.3, pp.217-221, 1986.
DOI : 10.1016/0032-5910(86)80044-4

J. Adanez, P. Gayan, F. Garcia-labiano, and L. F. De-diego, Axial voidage profiles in fast fluidized beds, Powder Technology, vol.81, issue.3, pp.259-268, 1994.
DOI : 10.1016/0032-5910(94)02906-7

R. H. Venderbosh, W. Prins, and W. P. Van-swaaij, Mass transfer and influence of the local catalyst activity on the conversion in a riser reactor, The Canadian Journal of Chemical Engineering, vol.78, issue.19, pp.262-274, 1990.
DOI : 10.1016/B978-0-08-031869-1.50009-0

J. Vollert and J. Werther, Mass transfer and reaction behaviour of a circulating fluidized bed reactor, Chemical Engineering & Technology, vol.30, issue.3, pp.201-209, 1994.
DOI : 10.1016/B978-0-08-031869-1.50009-0

A. G. Van-der-ham, W. Prins, and W. P. Van-swaaij, A small-scale regularly packed circulating fluidized bed, Powder Technology, vol.79, issue.1, pp.29-41, 1994.
DOI : 10.1016/0032-5910(93)02806-L

W. E. Ranz and W. R. Mashall, Evaporation of Drops, Chem. Eng. Progr, vol.48, pp.141-146, 1952.

D. Kunii and O. Levenspiel, Particle-to-Gas Mass and Heat Transfer, Fluidization Engineering, vol.11, pp.257-276, 1991.
DOI : 10.1016/B978-0-08-050664-7.50017-2

P. K. Halder and P. Basu, Mass Transfer From A Coarse Particle To A Fast Bed Of Fine Solids, Fluidization Engineering: Fundamentals and Application, AIChE Symposium Series, pp.58-67, 1988.

M. Suzuki, A. Engineering, K. Ltd, . Tokyo, C. N. Satterfield et al., Mass Transfer in Heterogeneous Catalysis, 1981.

J. C. Maxwell, ELECTRICITY AND MAGNETISM, p.1892
DOI : 10.1017/CBO9780511709333.002

E. R. Gilliland, R. F. Baddour, G. P. Parkinson, and K. J. Sladek, Diffusion on Surfaces. I. Effect of Concentration on the Diffusivity of Physically Adsorbed Gases, Diffusion on Surface. 1. Effect of Concentration on Diffusivity of Physically Adsorbed Gases, pp.95-99, 1974.
DOI : 10.1021/i160050a001

D. Van-zoonen, Measurements of Diffusional Phenomena and Velocity Profiles in a Vertical Riser On The Interaction Between Fluids and Particles, Proc. Symp, pp.64-71, 1962.

C. M. Brereton, J. R. Grace, Y. , and J. , Axial Gas Mixing in a Circulating Fluidized Bed, in Circulating Fluidized Bed Technology IV, pp.137-144, 1998.

Y. A. Li and P. Wu, A Study on Axial Gas Mixing in a Fast Fluidized Bed, in Circulating Fluidized Bed Technology III, pp.581-586, 1991.

N. T. Cankurt and J. Yerushalmi, Gas Backmixing on High Velocity Fluidized Beds, in Fluidization, pp.387-393, 1978.

G. Yang, Z. Huang, and L. Zhao, Radial Gas Dispersion in a Fast Fluidized Bed, pp.145-152, 1983.

H. Helmrich, K. A. Schugerl, and K. Janssen, Decomposition of NaHC0 3 in a Laboratory and Bach Scale Circulating Fluidized Bed Reactor, in Circulating Fluidized Bed Technology I, pp.161-166, 1986.

R. Bader, J. A. Findlay, and T. M. Knowlton, GAS/SOLIDS FLOW PATTERNS IN A 30.5-CM-DIAMETER CIRCULATING FLUIDIZED BED, Circulting Fluidized Bed Technology II, pp.123-137, 1988.
DOI : 10.1016/B978-0-08-036225-0.50016-2

H. Weinstein, J. Li, E. Bandlamudi, H. J. Feindt, and R. A. Graff, Gas Backmixing of Fluidized Bed in Different Regimes and Different Regions Engineering Foundation, pp.57-64, 1989.

Q. Y. Zheng, W. A. Xing, and F. Luo, Experimental Study on Radial Gas Dispersion and Its Enhancement in Circulating Fluidized Bed Engineering Foundation, pp.285-293, 1992.

M. Kwauk, N. Wang, Y. Li, B. Chen, and Z. Shen, Fast Fluidization at ICM, Circulating Fluidized Bed Technology, Proceedings of the First International Conference on Circulating Fluidized Beds, pp.33-62, 1985.

H. Li and M. Kwauk, Critical pneumatic Moving Bed Transport and Pneumatically controlled Peristaltic Feeder, 13 1 h International Conference on Hydrotransport -Slurry Handling and Pipeline Transport, Hydrotransport 13, BDR Group Conf, pp.357-366, 1996.

J. Li, C. Cheng, Z. Zhang, J. Yuan, A. Nemet et al., The EMMS model ??? its application, development and updated concepts, Chemical Engineering Science, vol.54, issue.22, pp.5409-5425, 1999.
DOI : 10.1016/S0009-2509(99)00274-2

. D. Ph, Student (in service), lnstitute of process Engineering

. Engineer, Beijing Research Institute of Coal Chernistry, China Coal Research Institute

S. Engineer and . Engineer, Biejing Research Institute of Coal Chernistry, China Coal Research Institute

L. W. Song, G. G. , T. D. , and L. J. , Institute of Peocess Engineering Adsorption Experiments with, Chinese Academy of Sciences, issue.1

X. W. Song, B. Y. , L. J. Song, B. Y. , and L. J. , Dissemination of NOx-Suppressed and Smokeless Domestic Stoves and Small-Scale Boilers in Developing Areas. R' 2000-Recovery, Recycling and Reintegration Configuration Optirnization of Nüx-Suppressed Smokeless Stoves for Burning Coals in Undeveloped Areas, Dilute VOCs in a Circulating Fluidized Bed. 96th Annual Conference & Exhibition of the Air and Waste Management Association 5th International Congress and Trade Show Proceedings of R'99 -Recovery, Recycling and Reintegration, 3rd International Congress with Exhibition. Geneva: Feb.2-5, p.135, 1999.

J. Li, S. W. Zhang, Y. Cao, and Z. , Environment-related research in multi-phase reaction engineering at ICM. Asia Symposium on Multi-phase Flow, 1999.

W. Song, L. Luo, D. Tondeur, and J. Li, Exploring the Details of Flow Structure in a Gas-Solid Circula ting Fluidized Bed by the Modified EMMS Model