]. R. Bibliographieand09 and . Andriamalala, Modélisation du défaut d'excentration dans une machine asynchrone.Application au diagnostic et à la commande de deux machines spécifiques, 2009.

J. Arellano-padilla, M. Sumner, and C. Gerada, On-line detection of stator winding short-circuit faults in a PM machine using HF signal injection, 2008 18th International Conference on Electrical Machines, pp.1-8, 2008.
DOI : 10.1109/ICELMACH.2008.4800099

S. Bachir, Contribution au diagnostic de la machine asynchrone par estimation paramétrique, 2002.

C. Belalahy, Dimensionnement d'une machine synchro-reluctante a excitation homopolaire par reseaux de permeances, 2008.
URL : https://hal.archives-ouvertes.fr/tel-01748702

D. Birolleau, Etude d'actionneurs électriques pour la tolérance aux fautes, 2008.

D. Bisault, Pourquoi et comment mesurer l'isolement électrique?, Contact, issue.52, pp.8-12, 1999.

M. Blödt, Condition Monitoring of Mechanical Faults in Variable Speed Induction Motor Drives, 2006.

T. Boileau, Contribution à la continuité de service des actionneurs synchrones à aimants permanents-Tolérance au défaut de capteur mécanique-Detection de défauts électriques, Institut National, 2010.

T. Boileau, N. Leboeuf, B. Nahid-mobarakeh, and F. Meibody-tabar, Online Identification of PMSM Parameters: Parameter Identifiability and Estimator Comparative Study, IEEE Transactions on Industry Applications, vol.47, issue.4, pp.1944-1957, 2011.
DOI : 10.1109/TIA.2011.2155010

T. Boileau, N. Leboeuf, B. Nahid-mobarakeh, and F. Meibody-tabar, Stator winding interturn fault detection using control voltages demodulation, ITEC, pp.1-6

M. B. Bouzid, G. Champenois, N. M. Bellaj, L. Signac, and K. Jelassi, An Effective Neural Approach for the Automatic Location of Stator Interturn Faults in Induction Motor, IEEE Transactions on Industrial Electronics, vol.55, issue.12, pp.4277-4289, 2008.
DOI : 10.1109/TIE.2008.2004667

A. Bouzida, Fault Diagnosis in Industrial Induction Machines Through Discrete Wavelet Transform, IEEE Transactions on Industrial Electronics, vol.58, issue.9, pp.4385-4395, 2011.
DOI : 10.1109/TIE.2010.2095391

F. Briz, M. W. Degner, A. Zamarron, and J. M. Guerrero, Online stator winding fault diagnosis in inverter-fed ac machines using high-frequency signal injection, IEEE Transactions on Industry Applications, vol.39, issue.4, pp.1109-1117, 2003.
DOI : 10.1109/TIA.2003.813746

V. P. Bui, Diagnostic des machies électriques par analyse du champ magnétique de fuite. Applications à l'identification de défauts rotoriques d'un alternateur à vide, 2007.

C. Caironi, Contribution à la maintenance prévisionnelle en ligne des machines électriques tournantes par l'analyse des signaux liés aux phénomènes physiques s'y rapportant, 2002.

R. Casimir, Diagnostic des défauts des machines asynchrones par reconnaissance des formes, 2003.

L. Chédot, G. Friedrich, J. M. Biedinger, and P. Macret, Integrated Starter Generator: The Need for an Optimal Design and Control Approach. Application to a Permanent Magnet Machine, IEEE Transactions on Industry Applications, vol.43, issue.2, pp.551-559, 2007.
DOI : 10.1109/TIA.2006.889900

S. Cheng, P. Zhang, and T. G. Habetler, An Impedance Identification Approach to Sensitive Detection and Location of Stator Turn-to-Turn Faults in a Closed-Loop Multiple-Motor Drive, IEEE Transactions on Industrial Electronics, vol.58, issue.5, pp.1545-1554, 2011.
DOI : 10.1109/TIE.2010.2064276

V. Choqueuse, M. E. Benbouzid, Y. Amirat, and S. Turri, Diagnosis of Three-Phase Electrical Machines Using Multi-dimensional Demodulation Techniques, IEEE Transactions on Industrial Electronics, vol.4, issue.59, pp.2014-2023, 2012.

S. M. Cruz and A. J. Cardoso, Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach, IEEE Transactions on Industry Applications, vol.37, issue.5, pp.1227-1233, 2001.
DOI : 10.1109/28.952496

]. S. Cru03, J. M. Cruz, H. A. Cardoso, and . Toliyat, Bibliographie Contribution à l'étude des MSAP en présence de défauts inter-spires iiDiagnosis of stator, Rotor and Airgap Eccentricity Faults in Three-Phase Induction Motors Based on the Multiple Referenecs Frames Theory, IAS, pp.1340-1346, 2003.

B. Davat, Z. Ren, and M. Lajoie-mazenc, The movement in field modeling, IEEE Transactions on Magnetics, vol.21, issue.6, pp.2296-2298, 1985.
DOI : 10.1109/TMAG.1985.1064185

M. David-pietrzak, Filtrage et estimation, 1993.

A. B. Dehkordi, A. M. Gole, and T. L. Maguire, Permanaent Magnet Synchronous Machine Model for Real Time Simulation, IPST, 2005.

A. B. Dehkordi, A. M. Gole, and T. L. Maguire, Real time simulation of internal faults in synchronous machines, IPST, 2007.

D. Diallo, M. E. Benbouzid, D. Hamad, and X. Pierre, Fault Detection and Diagnosis in an Induction Machine Drive: A Pattern Recognition Approach Based on Concordia Stator Mean Current Vector, IEEE Transactions on Energy Conversion, vol.20, issue.3, pp.512-519, 2005.
DOI : 10.1109/TEC.2005.847961

URL : https://hal.archives-ouvertes.fr/hal-00526691

G. Didier, Modélisation et diagnostic de la machine asynchrone en présence de défaillance, 2004.

B. M. Ebrahimi and J. Faiz, Feature Extraction for Short-Circuit Fault Detection in Permanent-Magnet Synchronous Motors Using Stator-Current Monitoring, IEEE Transactions on Power Electronics, vol.25, issue.10, pp.2673-2682, 2010.
DOI : 10.1109/TPEL.2010.2050496

A. M. El-refaie, Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges, IEEE Transactions on Industrial Electronics, vol.57, issue.1, pp.107-121, 2010.
DOI : 10.1109/TIE.2009.2030211

M. M. Ezzat, Commande non-linéaire sans capteur de la machine synchrone à aimants permanents, Ecole cenrale de Nantes, 2011.

J. Faiz, B. M. Ebrahimi, H. A. Toliyat, and A. B. , Diagnosis of a Mixed Eccentricity Fault in a Squirrel-cage Three-phase Induction Motor using Time Stepping Finite Element Technique, 2007 IEEE International Electric Machines & Drives Conference, pp.1446-1450, 2007.
DOI : 10.1109/IEMDC.2007.383641

J. A. Farooq, Etude du problème inverse en électromagnétisme en vue de la localisation des défauts de désaimantation dans les actionneurs à aimants permanents, 2008.

N. Féki, G. Clerc, and P. Velex, Modeling of gear-motor dynamic interactions-Applications to the tooth faults by electric measurements, VDI International Conference on Gears, 2010.

. Femm, . Femm, ]. F. Finite-element-medthod-magneticsfer08, J. P. Ferreira, A. T. Trovao et al., Motor Bearings ans Insulation System Condition Diagnosis by Means of Common-Mode Currents and Shafts-Ground Voltage Correlation, ICEM, Vilamoura, pp.1-6, 2007.

K. Fujiwara, T. Nakata, N. Okamoto, and K. Muramatsu, Method for determining relaxation factor for modified Newton-Raphson method, IEEE Transactions on Magnetics, vol.29, issue.2, pp.1962-1965, 1993.
DOI : 10.1109/20.250793

A. Gaillard, Système éolien basé sur une MADA: contribution à l'étude de la qualité de l'énergie électrique et de la continuité de service, 2010.

A. Gandhi, T. Corrigan, and L. Parsa, Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors, IEEE Transactions on Industrial Electronics, vol.58, issue.5, pp.1564-1575, 2011.
DOI : 10.1109/TIE.2010.2089937

T. Gautreau, Estimation des pertes fer dans les machines électriques. Modèle d'hystérésis loss surface et applications aux machines synchrones à aiamants permanents, Institut National, 2005.

C. Gerada, K. Bradley, and M. Sumner, Winding Turn to Turn Faults In Premanent Magnet Synchronous Machines Drives, IAS, pp.1029-1036, 2005.

]. S. Gub08, J. M. Gubric, B. H. Aller, and . Lu, Bibliographie Contribution à l'étude des MSAP en présence de défauts inter-spires iiiA Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems, IEEE Transactions on Industrial Electronics, vol.55, issue.12, pp.4127-4136, 2008.

S. Gubric, T. G. Habetler, and J. Restrepo, A New Concept for Online Surge Testing for Detection of Winding Insulation Deterioration, ECCE, pp.2051-2058, 2010.

B. K. Gupta, B. A. Lloyd, and D. K. Sharma, Degradation of turn insulation in motor coils under repetitive surges, IEEE Transactions on Energy Conversion, vol.5, issue.2, pp.320-326, 1990.
DOI : 10.1109/60.107228

D. Hadiouche, Contribution à l'étude de la machine synchrone double étoile: modélisation, alimentation et structure, 2001.

M. Hajiaghajani, L. Hao, S. M. Madani, and T. Toliyat, A method for detection of eccentricity in permanent magnet machines, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003., pp.1833-1838, 2003.
DOI : 10.1109/IAS.2003.1257818

]. R. Ham00 and . Hamilton, DC Motor Brush Life, IEEE Transactions on Industry Applications, vol.36, issue.6, pp.1682-1687, 2000.

M. O. Hamiti, Réduction des oscillations de couple d 'une machine à reluctance variable- Approche par la structure et par la commande, 2009.

S. Hamdani, O. Touhami, R. Ibtiouen, and M. Fadel, Neural network technique for induction motor rotor faults classification-dynamic eccentricity and broken bar faults-, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, pp.626-631, 2011.
DOI : 10.1109/DEMPED.2011.6063689

H. Henao, C. Demian, and G. A. Capolino, A frequency-domain detection of stator winding faults in induction machines using an external flux sensor, IEEE Transactions on Industry Applications, vol.39, issue.5, pp.1272-1279, 2003.
DOI : 10.1109/TIA.2003.816531

H. Henao, H. Razik, and G. A. Capolino, Analytical Approach of the Stator Current Frequency Harmonics Computation for Detection of Induction Machine Rotor Faults, IEEE Transactions on Industry Applications, vol.41, issue.3, pp.801-807, 2005.
DOI : 10.1109/TIA.2005.847320

J. Holtz and J. Quan, Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification, IEEE Transactions on Industry Applications, vol.38, issue.4, pp.1087-1095, 2002.
DOI : 10.1109/TIA.2002.800779

T. Kato, K. Inoue, and D. Okuda, Diagnosis of Multi-Phase Turn Faults of Induction Motor Stator Windings, PEDS, pp.1047-1054, 2009.

M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controlled inverters, IEEE Electrical Insulation Magazine, vol.12, issue.5, pp.9-16, 1996.
DOI : 10.1109/57.537190

K. Keyong-hwa, Simple Online Fault Detecting Scheme for Short-Circuited Turn in a PMSM Through Current Hrmonic Monitoring, IEEE Transactions on Industrial Electronics, vol.58, issue.6, pp.2565-2568, 2011.

M. Khov, J. Faucher, and J. Regnier, Surveillance en ligne de défauts de court-circuits statoriques d'une machine synchrone à aimants permanents par suivi paramètrique, 2008.

S. H. Kia, H. Henao, and G. A. Capolino, Analytical and Experimental Study of Gearbox Mechanical Effect on the Induction Machine Stator Current Signature, IEEE Transactions on Industry Applications, vol.45, issue.4, pp.1405-1415, 2009.
DOI : 10.1109/TIA.2009.2023503

S. Küttler, Modèle analytique prenant en compte la saturation croisée pour le dimensionnement optimal des machines à aimants internes, EF, Belfort, 2011. [Lap07] B. Laporte, Electrotechnique, machines électriques tournantes, 2007.

R. Lateb, Modélisation des machines asynchrones synchrones à aimants avec prise en compte des harmoniques d'espace et de temps, 2006.

A. Lebaroud and G. Clerc, Diagnosis of induction motor faults using instantaneous frequency signature analysis, 2008 18th International Conference on Electrical Machines, pp.1-5, 2008.
DOI : 10.1109/ICELMACH.2008.4799993

URL : https://hal.archives-ouvertes.fr/hal-00375983

N. Leboeuf, Fault Detection in a Current Controlled PM Drive Using Back-EMF Estimation and Residual Analysis, 2010 IEEE Industry Applications Society Annual Meeting, pp.1-6, 2010.
DOI : 10.1109/IAS.2010.5616894

]. N. Leb11a and . Leboeuf, Modelling of Permanent Magnet Synchronous Machines Under Inter-turn Fault, 2011.

N. Leboeuf, T. Boileau, B. Nahid-mobarakeh, F. Meibody-tabar, and G. Clerc, Real-Time Detection of Interturn Faults in PM Drives Using Back-EMF Estimation and Residual Analysis, IEEE Transactions on Industry Applications, vol.47, issue.6, pp.2402-2412, 2011.
DOI : 10.1109/TIA.2011.2168929

URL : https://hal.archives-ouvertes.fr/hal-00730084

N. Leboeuf, Modélisation des machines à aimants permanents en présence de défauts inter-spires, EF, 2011.

N. Leboeuf, Estimating Permanent-Magnet Motor Parameters Under Inter-Turn Fault Conditions, IEEE Transactions on Magnetics, vol.48, issue.2, pp.963-966, 2012.
DOI : 10.1109/TMAG.2011.2177642

URL : https://hal.archives-ouvertes.fr/hal-00730653

N. Leboeuf, On Inductance Calculations in PM Motors Under Fault Conditions, IEEE Transactions on Magnetics, vol.10, issue.48, pp.2605-2616, 2012.

N. Leboeuf, Taking into Account Manufacturing Faults in PMSM, CEFC
URL : https://hal.archives-ouvertes.fr/hal-00814827

W. , L. Roux, R. G. Harley, and T. G. Habetler, Detecting Faults in Rotors of PM Drives, IEEE Industry Applications magazine, vol.14, issue.2, pp.23-31, 2008.

J. Lin, A New Approach of Dead-Time Compensation for PWM Voltage Inverters, IEEE Transactions on circuits and systems, vol.49, issue.4, pp.476-483, 2002.

L. Liu, Robust fault detection and diagnosis for permanent magnet synchronus motor, Florida State University, 2006.

W. Liu, E. Schaeffer, L. Loron, and P. Chanemouga, High Frequency Modelling of Stator Windings Dedicated to Machine Insulation Diagnosis by Parametric Identification, 2007 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, pp.480-485, 2007.
DOI : 10.1109/DEMPED.2007.4393141

F. Magnussen, Iron losses in salient permanent magnet machines at field-weakening operation, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting., 2004.
DOI : 10.1109/IAS.2004.1348386

A. Mahyob, P. Reghem, and G. Barakat, Permeance Network Modeling of the Stator Winding Faults in Electrical Machines, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1820-1823, 2009.
DOI : 10.1109/TMAG.2009.2012780

J. P. Martin, T. Boukra, and G. Clerc, Contribution à l'alimentation en tension des machines synchrones à aimants à nombre de phase élevé: fonctionnement normal et dégardé Institut National Polytechniique de Lorraine Thèse de doctoratBack Propagation Neural Network For Classification of Induction Machine Faults, SDEMPED, pp.525-528, 2003.

F. Meibody-tabar, Etude d'une machine synchrone à reluctance variable pour des applications à grande vitesse, 1986.

J. L. Muller, 3D FE Modelling of Interlamination Short-circuits Tking into Account the Building Bar, 2011.

B. Nahid-mobarakeh, Commande vectorielle sans capteur mécanique de machine synchrone à aimants: méthodes, convergence, robustesse, identification "en ligne" des paramètres, 2001.

T. A. Najafabadi, F. R. Salmasi, and P. Jabehdar-maralani, Detection and Isolation of Speed-, DC-Link Voltage-, and Current-Sensor Faults Based on an Adaptive Observer in Induction-Motor Drives, IEEE Transactions on Industrial Electronics, vol.58, issue.5, pp.1662-1672, 2010.
DOI : 10.1109/TIE.2010.2055775

S. Nandi and H. A. Toliyat, Fault diagnosis of electrical machines-a review, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272), pp.219-221, 1999.
DOI : 10.1109/IEMDC.1999.769076

D. M. Negrea, Electromagnetic flux monitoring for detecting faults in electrical machines, 2006.

P. Neti, A. B. Dehkordi, and A. M. Gole, A New Robust Method To Detect Rotor Faults in Salient-Pole Synchronous Machines Using Structural Asymmetries, 2008 IEEE Industry Applications Society Annual Meeting, pp.1-8, 2008.
DOI : 10.1109/08IAS.2008.22

O. Ondel, Diqgnostic par reconnaissance de formes : application à un ensemble convertisseur machine asynchrone, 2007.
DOI : 10.3166/rige.9.299-331

V. Ostovic, Computation of Saturated Permanent-Magnet AC Motor Performance by Means of Magnetic Circuits, IEEE Transactions on Industry Applications, vol.23, issue.5, pp.836-841, 1987.
DOI : 10.1109/TIA.1987.4504992

M. Pacas, S. Villwock, and R. Dietrich, Bearing Damage Detection in Permanent Magnet Bibliographie Contribution à l'étude des MSAP en présence de défauts inter-spires v

J. Penman, H. G. Sedding, B. A. Lloyds, and W. T. Fink, Detection and location of interturn short circuits in the stator windings of operating motors, IEEE Transactions on Energy Conversion, vol.9, issue.4, pp.652-658, 1994.
DOI : 10.1109/60.368345

J. Perho, Reluctance Network for Analysing Induction Machine, 2002.

D. Petrichenko, Contribution à la modélisation et à la conception optimale des turboalternateurs de faible puissance, 2007.

M. M. Rahimian, S. Choi, and K. Butler-purry, Modeling and Analysis of Synchronous Machines with broken damper bars, Compumag, 2011.

S. Rajagopalan, J. M. Aller, J. A. Restrepo, T. G. Habetler, and R. G. Harley, Detection of Rotor Faults in Brushless DC Motors Operating Under Nonstationary Conditions, IEEE Transactions on Industry Applications, vol.42, issue.6, pp.1464-1477, 2006.
DOI : 10.1109/TIA.2006.882613

S. Rajagopalan, T. G. Habetler, R. G. Harley, T. Sebastian, and B. Lequesne, Current/Voltage-Based Detection of Faults in Gears Coupled to Electric Motors, IEEE Transactions on Industry Applications, vol.42, issue.6, pp.1412-1420, 2006.
DOI : 10.1109/TIA.2006.882636

T. Raminosoa, Optimisation des machines synchro-reluctante par réseaux de perméances, 2006.

H. Razik and G. Didier, Note de cours sur le diagnostic de la machine asynchrone, 2003.

P. Reichmeider, C. A. Gross, D. Querrey, D. Novosel, and S. Salon, Internal faults in synchronous machines. I. The machine model, IEEE Transactions on Energy Conversion, vol.15, issue.4, pp.376-379, 2000.
DOI : 10.1109/60.900496

J. Ribrant and L. M. Bertling, Survey of Failures in Wind Power Systems With Focus on Swedish Wind Power Plants During 1997???2005, IEEE Transactions on Energy Conversion, vol.22, issue.1, pp.167-173, 1997.
DOI : 10.1109/TEC.2006.889614

J. R. Riba-ruiz, J. A. Rosero, A. G. Espinosa, and L. , Detection of Demagnetization Faults in Permanent-Magnet Synchronous Motors Under Nonstationary Conditions, IEEE Transactions on Magnetics, vol.45, issue.7, pp.2961-2969, 2009.
DOI : 10.1109/TMAG.2009.2015942

L. Romeral, J. C. Urresty, J. Ruiz, and A. G. Espinosa, Modeling of Surface-Mounted Permanent Magnet Synchronous Motors With Stator Winding Interturn Faults, IEEE Transactions on Industrial Electronics, vol.58, issue.5, pp.1576-1585, 2011.
DOI : 10.1109/TIE.2010.2062480

J. A. Rosero, L. Romeral, J. Cusido, A. Garcia, and J. A. Ortega, On the short-circuiting Fault Detection in a PMSM by means of Stator Current Transformations, 2007 IEEE Power Electronics Specialists Conference, pp.1936-1941, 2007.
DOI : 10.1109/PESC.2007.4342300

J. Rosero, J. Ortega, J. Urresty, J. Cardenas, and L. , Stator Short Circuits Detection in PMSM by means of Higher Order Spectral Analysis (HOSA), 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition, pp.964-969, 2009.
DOI : 10.1109/APEC.2009.4802779

N. Schachter, Slip rings Inductions Motors-Brush holder and solutions, CIMENTEC ENGINEERING LTD, 2006.

R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartheld, Motor bearing damage detection using stator current monitoring, IEEE Transactions on Industry Applications, vol.31, issue.6, pp.1274-1279, 1995.
DOI : 10.1109/28.475697

E. Schaeffer, Diagnostic des machines asynchrones: modèles et outils paramètriques dédiés à la simulation et à la détection de défauts, 1999.

M. A. Shamsi-nejad, Architecture d'alimentation et de commande d'actionneurs tolérant aux défauts-Régulateur de courant non-linéaire à large bande passante, 2007.

G. K. Singh and S. A. Kazzaz, Induction machine drive condition monitoring and diagnostic research???a survey, Electric Power Systems Research, vol.64, issue.2, pp.145-158, 2003.
DOI : 10.1016/S0378-7796(02)00172-4

J. Sottile and J. L. Kohler, An on-line method to detect incipient failure of turn insulation in random-wound motors, IEEE Transactions on Energy Conversion, vol.8, issue.4, pp.762-768, 1993.
DOI : 10.1109/60.260992

A. Soualhi, G. Clerc, and H. Razik, Faults classification of induction machine using an Bibliographie Contribution à l'étude des MSAP en présence de défauts inter-spires vi improved ant clustering technique, SDEMPED, pp.316-321, 2011.

Z. Sun, J. Wang, D. Howe, and G. Jewell, Analytical Prediction of the Short-Circuit Current in Fault-Tolerant Permanent-Magnet Machines, IEEE Transactions on Industrial Electronics, vol.55, issue.12, pp.4210-4217, 2008.

A. Takorabet, Dimensionnement d'une machine à double excitation de structure innovante pour une application alternateur automobile. Comparaison à des structures classiques, Ecole Normale Supérieure de Cachan, 2008.
URL : https://hal.archives-ouvertes.fr/tel-00505148

R. M. Tallam, T. G. Habetler, and R. G. Harley, Transient model for induction machines with stator winding turn faults, IEEE Transactions on Industry Applications, vol.38, issue.3, pp.632-637, 2002.
DOI : 10.1109/TIA.2002.1003411

O. V. Thorsen and M. Dalva, A survey of faults on induction motors in offshore oil industry, petrochemical industry, gas terminals, and oil refineries, IEEE Transactions on Industry Applications, vol.31, issue.5, pp.1186-1196, 1995.
DOI : 10.1109/28.464536

H. A. Toliyat, Condition Monitoring and Fault Diagnosis of Electrical Machinery, Texas A&M University, 2002.

B. Trajin, Détection automatique et diagnostic des défauts de roulements dans une machine asynchrone par analyse spectrale des courants statoriques, JCGE, 2008.

X. Tu, L. A. Dessaint, M. Kahel, and A. Barry, Modeling and experimental validation of internal faults in salient pole synchronous machines including space harmonics, Mathematics and Computers in Simulation, vol.71, issue.4-6, 2005.
DOI : 10.1016/j.matcom.2006.02.003

B. Vaseghi, Contribution à l'étude des machines électriques en présence de défaut entrespires, 2009.

N. Velly, Contribution à l'étude des machines multi-enroulement pour l'aéronautique: Machine synchrone à aimants permanents pour la tolérance aux défauts-Machine asynchrone pour la traction, 2011.

P. Venet, Amélioration de la sureté de fonctionnement des dispositifs de stockage d'énergie, 2007.

L. Vido, Etude d'actionneurs à double excitation déstinés au transport, Ecole Normale, 2004.

P. Werynski, Vieillissement des di??lectriques et surveillance in situ des machines ??lectriques, Revue de l'Electricit?? et de l'Electronique, vol.-, issue.10, 2006.
DOI : 10.3845/ree.2006.097

J. C. Wheeler, Effects of converter pulses on the electrical insulation in low and medium voltage motors, IEEE Electrical Insulation Magazine, vol.21, issue.2, pp.22-29, 2005.
DOI : 10.1109/MEI.2005.1412216

E. Wiedenburg, G. Frey, and J. Wilson, Impulse testing and turn insulation deterioration in electric motors, Conference Record of the 2003 Annual Pulp and Paper Industry Technical Conference, 2003., pp.50-55, 2003.
DOI : 10.1109/PAPCON.2003.1216899

L. Xiangning, T. Qing, P. Liu, and C. Li, Investigation of internal fault modeling powerformer, PES, pp.1-7, 2005.

B. Yazici, Statistical Pattern Analysis of Partial Discharge Measurements for Quality Assessment of Insulation Systems in High-Voltage Electrical Machinery, IEEE Transactions on Industry Applications, vol.40, issue.6, pp.1579-1594, 2004.
DOI : 10.1109/TIA.2004.836174

L. Youngkook, A stator turn fault detection method and a fault tolerant operating strategy for interior PM synchronus motor drives in safety critical applications, 2007.

Y. Zhang and J. Jiang, Bibliographical review on reconfigurable fault-tolerant control systems, Annual Reviews in Control, vol.32, issue.2, pp.229-252, 2008.
DOI : 10.1016/j.arcontrol.2008.03.008

Z. Q. Zhu, Z. Azar, and G. Ombach, Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular Stators, IEEE Transactions on Magnetics, vol.48, issue.6, pp.2049-2055, 2012.
DOI : 10.1109/TMAG.2011.2179667