H. Alamari and I. M. Low, Mechanical properties and water absorption behaviour of recycled cellulose bre reinforced epoxy composites, Polymer Testing, vol.31, p.620628, 2012.

M. C. Altan, S. S. Selcuk, I. Guceri, and R. B. , Pipes. numerical prediction of threedimensional bre orientation in hele-shaws ows, Polym. Eng. Sci, vol.30, p.848859, 1990.

H. Altendorf, 3D Morphological Analysis and Modeling of Random Fiber Networks applied on Glass Fber Reinforced Composites, 2011.

S. Andrieux, Y. Bamberger, and J. J. Marigo, Un modèle de matériau microssuré pour les roches et les bétons, Journal de mécanique théorique et aplliquée, vol.5, issue.3, p.471513, 1986.

A. Andriyana, N. Billon, and L. Silva, Mechanical response of a short fiber-reinforced thermoplastic: Experimental investigation and continuum mechanical modeling, European Journal of Mechanics - A/Solids, vol.29, issue.6, p.10651077, 2010.
DOI : 10.1016/j.euromechsol.2010.07.001

URL : https://hal.archives-ouvertes.fr/hal-00524733

A. Arbelaiz, B. Fernández, J. A. Ramos, A. Retegi, R. Llano-ponte et al., Mechanical properties of short ax bre bundle/polypropylene composites : Inuence of matrix/bre modication, bre content, water uptake and recycling, Composites Science and Technology, vol.65, p.15821592, 2005.

A. Ashori, Review paper woodplastic composites as promising green-composites for automotive industries ! Bioresource Technology, p.46614667, 2008.

C. Baley, Analysis of the ax bres tensile behaviour and analysis of the tensile stiness increase, Composites : Part A, vol.33, p.939948, 2002.

C. Baley, Fibres naturelles de renfort pour matériaux composites, 2004.

C. Baley, Propriétés des bres extraites de phanérogames marines (zostera marina) Renforcement des polymères par des bres végétales, journée scientique technique -AMAC, p.2540, 2006.

Z. P. Bazant, Quasibrittle fracture scaling and size eect -nal report, Materials and Structures, vol.37, p.547568, 2004.

Z. P. Bazant and S. D. Pang, Mechanics-based statistics of failure risk of quasibrittle structures and size eect on safety factors, Proceedings on the National Academy of Sciences, 2006.

G. W. Beckermann and K. L. Pickering, Engineering and evaluation of hemp bre reinforced polypropylene composites : Fibre treatment and matrix modication, Composites : Part A, vol.39, p.979988, 2008.

G. W. Beckermann and K. L. Pickering, Engineering and evaluation of hemp bre reinforced polypropylene composites : Micro-mechanics and strength prediction modelling, Composites : Part A, vol.40, p.210217, 2009.

M. D. Beg and K. L. Pickering, Mechanical performance of kraft bre reinforced polypropylene composites : Inuence of bre length, bre beating and hygrothermal ageing, Composites : Part A, vol.39, p.17481755, 2008.

M. Berveiller, T. Bretheau, and R. Fougeres, Homogénéisation en mécanique des matériaux 2. Comportement non linéaires et problèmes ouverts, chapter Rappels sur les mécansimes de la plasticité et de l'endommagement, p.203249, 2001.

N. Billon, Matériaux pour l'ingénieur, chapter Chapitre XII : comportement mécanique des polymères, p.153162, 2010.

A. K. Bledzki and J. Gassan, Composites reinforced with cellulose based bres, Progress in Polymer Science, vol.24, p.221274, 1999.

E. Bodros, I. Pillin, N. Montrelay, and C. Baley, Could biopolymers reinforced by randomly scattered ax bre be used in structural applications ?, Composites Science and Technology, vol.67, p.462470, 2007.

S. Bolte and F. P. Cordelières, A guided tour into subcellular colocalization analysis in light microscopy, Journal of Microscopy, vol.56, issue.3, p.213232, 2006.
DOI : 10.1016/S0014-5793(03)00521-0

URL : https://hal.archives-ouvertes.fr/hal-00132481

C. Bonnafous, F. Touchard, L. Chocinski-arnault, C. Dever, and G. Alise, Multi-scale damage analysis of hemp-bre woven fabric/epoxy composites by using acoustic emission

V. Bouchart, Etude expérimentale et modélisation micromécanique du comportement et de l'endommagement des élastomères renforcés, 2007.

A. Bourmaud and C. Baley, Investigations on the recycling of hemp and sisal bre reinforced polypropylene composite, Polymer Defradation and Stability, vol.92, p.10341045, 2007.

A. Bourmaud and S. Pimbert, Investigations on mechanical properties of poly(propylene) and poly(lactic acid) reinforced by miscanthus bers, Composites : Part A, vol.39, p.14441454, 2008.

A. Bourmaud, J. Riviere, A. L. Duigou, G. Raj, and C. Baley, Investigations of the use of a mussel-inspired compatibilizer to improve the matrix-ber adhesion of a biocomposite, Polymer Testing, vol.28, p.668672, 2009.

P. Cailleau, Eets thermiques et dommage mécanique au cours de la fatigue du polypropylene, 1996.

V. Carmona, Etude de l'endommagement de matériaux composites par tomographie X et émission acoustique, L'Institut National des Sciences Appliquées de Lyon, 2009.

S. Z. Cheng, J. J. Janimak, and J. Rodriguez, Cristalline structures of polypropylene homo-and copolymers, Polypropylene : Structure and morphology, 1995.

F. R. , C. Jr, and J. L. Thomason, Thermoelastic anisotropy of a natural ber, Composites Science and Technology, vol.62, p.669678, 2002.

G. Cusatis, A. Beghini, and Z. P. Bazant, Spectral stifness microplane model for quasibrittle composite laminates, Journal of Applied Machanics, vol.75, p.16, 2008.

A. C. De-albuquerque, K. Joseph, L. Hecker-de-carvalho, and J. R. Almeida, Effect of wettability and ageing conditions on the physical and mechanical properties of uniaxially oriented jute-roving-reinforced polyester composites, Composites Science and Technology, vol.60, issue.6, pp.833-844, 2000.
DOI : 10.1016/S0266-3538(99)00188-8

I. M. De-rosa, C. Santulli, and F. Sarasini, Acoustic emission for monitoring the mechanical behaviour of natural bre composites : A literature review, Composites : Part A, vol.40, p.14561469, 2009.

V. Deudé, Non linéarités géométriques et physiques dans les milieux poreux : apport des méthode de changement d'échelle, 2002.

V. Deudé, L. Dormieux, and D. Kondo, Micromechanical approach to non-linear poroelasticity : Application to cracked rocks, Journal of Engineering Mechanics, vol.128, p.848855, 2002.

H. N. Dhakal, Z. Y. Zhang, and M. O. Richardson, Eect of water absorption on the mechanical properties of hemp bre reinforced unsaturated polyester composites, Composites Science and Technology, vol.67, p.16741683, 2007.

I. Doghri and L. Tinel, Micromechanical modeling and computation of elasto-plastic materials reinforced with distributed-orientation bers, BIBLIOGRAPHIE International Journal of Plasticity, vol.21, 2005.

I. Doghri and L. Tinel, Micromechanics of inelastic composites with misaligned inclusions: Numerical treatment of orientation, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.13-16, p.13871406, 2006.
DOI : 10.1016/j.cma.2005.05.041

D. Dray-bensahkoun, Prediction des propriétés thermo-élastiques d'un composite injecté et chargé de bres courtes, 2006.

A. Duval, A. Bourmaud, L. Augier, and C. Baley, Inuence of sampling area of the stem on the mechanical properties of hemp ber, Materials Letters, vol.65, p.797800, 2011.

C. Duval, Polypropylènes (pp), 2004.

J. D. Eshelby, The determination of elastic eld of an ellipsoidal inclusion and related problems, Proceedings of the Royal Society of London. Series A, Mathematical ans Physical Sciences, vol.241, p.376396, 1957.

A. G. Facca, M. T. Kortschot, and N. Yan, Predicting the elastic modulus of natural bre reinforced thermoplastics, Composites : Part. A, vol.37, p.16601671, 2006.

A. G. Facca, M. T. Kortschot, and N. Yan, Predicting the tensile strength of natural bre reinforced thermoplastics, Composites Science and Technology, vol.67, p.24542466, 2007.

K. Friedrich, Crazes and shear bands in semi-crystalline thermoplastics Advances in Polymer Science, Crazing in polymers, p.225274, 1983.

J. George, M. S. Sreekala, and S. Thomas, A review on interface modication and characterization of natural ber reinforced plastic composites, Polymer Engineering and Science, vol.41, issue.9, p.14711485, 2001.

S. Th, P. A. Georgopoulos, E. Tarantili, A. G. Avgerinos, E. G. Andreopoulos et al., Thermoplastic polymers reinforced with brous agricultural residues, Polymer Degradation and Stability, vol.90, issue.2, p.3030312, 2005.

I. C. Gruescu, Approche par changement d'échelle de l'endommagement des matériaux composites à matrice fragile, 2004.

S. Guessasma, M. Sehaki, D. Lourdin, and A. Bourmaud, Viscoelasticity properties of biopolymer composite materials determined using nite element calculation and nanoindentation, Computational Materials Science, vol.44, p.371377, 2008.

G. L. Hand, A theory of anisotropic uids, Journal of Fluid Mechanics, vol.13, p.3346, 1962.

K. H. Hanish and D. Stoyan, Stereological estimation of the radial distribution function of centres of spheres, Journal of Microscopy, vol.17, issue.5, p.131141, 1981.
DOI : 10.1017/S0021900200094328

T. Hatakeyama and H. Hatakeyama, Thermal Properties of Green Polymers and Biocomposites, 2005.

P. H. Hermans, J. J. Hermans, D. Vermaas, and A. Weidinger, Deformation mechanism of cellulose gels. IV. General relationship between orientation of the crystalline and that of the amorphous portion, Journal of Polymer Science, vol.3, issue.1, p.19, 1948.
DOI : 10.1002/pol.1948.120030101

P. J. Herrera-franco and A. Valadez-gonzález, A study of the mechanical properties of short natural-ber reinforced composites, Composites : Part B, vol.36, p.597608, 2005.

T. A. Huy, R. Adhikari, T. Lüpke, S. Hennig, and G. H. Michler, Molecular deformation mechanisms of isotactic polypropylene in alpha-and beta-crystal forms by ftir spectroscopy, Journal of Polymer Science : Part B : Polymer Physics, vol.49, p.44784488, 2004.

S. Jin and X. L. Gong, Inuence du vieillissement en humidité relative sur les propriétés mécaniques des bres de chanvre, 20ème Congrès Français de Mécanique, 2011.

M. J. John and S. Thomas, Review biobres and biocomposites, Carbohydrate Polymers, vol.71, p.343364, 2008.

P. V. Joseph, G. Mathew, K. Joseph, G. Groeninckx, and S. Thomas, Dynamic mechanical properties of short sisal bre reinforced polypropylene composites, Composites : Part A, vol.34, p.275290, 2003.

S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, Are natural ber composites environmentally superior to glass ber reinforced composites ?, Composites : Part A, vol.35, p.371376, 2004.

L. Kachanov, On the creep fracture time, Izv Akag Nauk USSR Otd Tech, vol.8, p.2631, 1958.

L. M. Kachanov, Introduction to continuum damage mechaniscs. The Netherlands Nijho, p.138, 1986.

M. Kachanov and J. P. Laures, Three-dimensional problems os strongly interacting arbitrarily located penny-shaped cracks, International Journal of Fracture, vol.41, p.289313, 1989.
DOI : 10.1007/bf00018861

A. C. Karmaker, A. Homann, and G. Hinrichsen, Inuence of water uptake on the mechanical properties of jute bre reinforced polypropylene, J. Appl. Polym Sci, vol.54, p.18031807, 1994.

P. A. Karnezis, G. Durrant, and B. Cantor, Characterization of Reinforcement Distribution in Cast Al-Alloy/SiCp Composites, Materials Characterization, vol.40, issue.2, p.97109, 1998.
DOI : 10.1016/S1044-5803(97)00106-X

V. Karpov and M. Kaufman, Injection molding of glass reinforced nylon 66, British PLastics, vol.38, p.498506, 1965.

E. J. Kramer and L. L. Berger, Craze growth and fracture Advances in Polymer Science, Crazing in polymers, p.168, 1990.

M. Krishnapillai, R. Jones, I. H. Marshall, M. Bannister, and N. Rajic, Thermography as a tool for damage assessment, Composite Structures, vol.67, issue.2, p.149155, 2005.
DOI : 10.1016/j.compstruct.2004.09.015

H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, A review on the tensile properties of natural bre reinforced polymer composites, Composites : Part B, vol.42, p.856873, 2011.

T. Labour, C. Gauthier, R. Séguéla, G. Vigier, Y. Bomal et al., Inuence of the ÿ crystalline phase on the mechanical properties of unlled and caco3-lled polypropylene. i. structural and mechanical characterisation, Polymer, vol.42, p.71277135, 2001.

J. F. Labuz and L. Biolzi, Characteristic strength of quasi-brittle materials, International Journal of Solids and Structures, vol.35, issue.31-32, p.41914203, 1998.
DOI : 10.1016/S0020-7683(97)00309-0

C. Lemaignan, La rupture des matériaux, Sciences, 2003.

J. Lemaitre, A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, issue.1, p.8391, 1985.
DOI : 10.1115/1.3225775

J. Lemaitre, Local approach of fracture, Engineering Fracture Mechanics, vol.25, issue.5-6, p.523559, 1986.
DOI : 10.1016/0013-7944(86)90021-4

J. Lemaitre and J. J. Chaboche, A nonlinear model for creep fatigue cumulation and interaction, IUTAM symposium on mechanics of viscoelastic media and bodies. Hult editor, 1975.

J. Lemaitre and J. L. Chaboche, Mécaniques des matériaux solides, 1988.

Y. Li, K. L. Pickering, and R. L. , Determination of interfacial shear strength of white rot fungi treated hemp bre reinforced polypropylene, Composites Science and Technology, vol.69, p.11651171, 2009.

J. Z. Lu, Q. Wu, and H. S. Mcnabb, Chemical coupling in wood ber and polymer composites : a review of coupling agents and treatments, Wood Fiber Sci, vol.32, issue.1, p.88104, 2000.

P. Lucas and G. Zanella, Mise en oeuvre des composites thermoplastiques -compounds à bres courtes et longues, 2007.

E. Maire, L. Salvo, P. Cloetens, and M. D. Michiel, Tomographie à rayons x appliquée à l'étude des matériaux, 2004.

J. J. Marigo, Formulation d'un loi d'endommagement d'un matériau élastique, p.13091312, 1981.

F. Meraghni and M. L. Benzeggah, Micromechanical modelling of matrix degradation in randomly oriented discontinuous-bre composites, Composites Science and Technology, vol.55, p.171186, 1995.

S. Mertens, Hysteresis, damage and moisture eects in quasi-brittle porous materials, 2009.

T. Mura, Micromechanics of defects in solids 2nd edition, 1987.

P. Mutjé, A. Lòpez, M. E. Vallejos, J. P. López, and F. Vilaseca, Full exploitation of cannabis sativa as reinforcement/ller of thermoplastic composite materials, Composites : Part A, vol.38, p.369377, 2007.

T. P. Nevell and S. H. Zeronian, Cellulose chemistry and its applications, 1985.

N. A. Noda and Y. Takase, Intensity of singular stress elds at the ber ends in ber reinforced plastics, International Journal of Solids and Structures, vol.42, p.48904908, 2005.

L. O. Nordin and J. Varna, Nonlinear viscoplastic and nonlinear viscoelastic material model for paper ber composites in compression, Composites Part A : Applied Science and Manufacturing, vol.37, p.344355, 2006.

E. Onat, Representation of mechanical behavior in the presence of internal damage, Engineering Fracture Mechanics, vol.25, issue.5-6, p.605618, 1986.
DOI : 10.1016/0013-7944(86)90026-3

D. G. Papageorgiou, D. N. Bikiaris, and K. Chrissas, Eect of crystalline structure of polypropylene random copolymers on mechanical properties and thermal degradation kinetics, Thermochimica Acta, vol.543, p.288294, 2012.

T. Park and G. Z. Voyiadjis, Damage analysis and elasto-plastic behavior of metal matrix composites using the finite element method, Engineering Fracture Mechanics, vol.56, issue.5, pp.623-646, 1997.
DOI : 10.1016/S0013-7944(96)00119-1

S. C. Petts, Characterisation of spatial dispersions Part II Thesis, 1991.

K. L. Pickering, G. W. Beckermann, S. N. Alam, and N. J. Foreman, Optimising industrial hemp bre for composites, Composites : Part A, vol.38, p.461468, 2007.

E. J. Piqué, Fracture process zone of quasi brittle materials : a model material approach, 2002.

]. V. Placet, Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1111-1118, 2009.
DOI : 10.1016/j.compositesa.2009.04.031

URL : https://hal.archives-ouvertes.fr/hal-00395479

V. Placet, F. Trivaudey, O. Cisse, V. Gucheret-retel, and L. Boubakar, Diameter dependence of the apparent tensile modulus of hemp bres : A morphological, structural or ultrastructural eect ?, Composites : Part A, vol.43, p.275287, 2012.

M. Ponçot, Comportements thermomécaniques de polymères chargés selon diérents chemins de déformation et traitement thermiques, 2009.

L. A. Pothan, Z. Oommen, and S. Thomas, Dynamic mechanical analysis of banana ber reinforced polyester composites, Compos. Sci. Technol, vol.63, p.283293, 2003.

M. Pracella, D. Chionna, I. Anguillesi, Z. Kulinski, and E. Piorkowska, Functionalization , compatibilization and properties of polypropylene composites with hemp bres, Composites Science and Technology, vol.66, p.22182230, 2006.

S. Prager, Stress???Strain Relations in a Suspension of Dumbbells, Transactions of the Society of Rheology, vol.1, issue.1, p.53, 1994.
DOI : 10.1122/1.548808

H. G. Premalal, H. Ismail, and A. Baharin, Comparison of the mechanical properties of rice husk powder lled polypropylene composites with talc lled polypropylene composites, Polymer Testing, vol.21, p.833839, 2002.

Y. U. Rabotnov, Creep rupture, XII international congress on applied mechanics, 1969.
DOI : 10.1007/978-3-642-85640-2_26

M. Ragoubi, D. Bienaimé, S. Molina, B. George, and A. Merlin, Impact of corona treated hemp bres onto mechanical properties of polypropylene composites made thereof, Industrial Crops and Products, vol.31, p.344349, 2010.

A. Redjeb, Simulation numérique de l'orientation de bres en injection de thermoplastique renforcé, 2007.

A. Redjeb, P. Laure, L. Silva, M. Vincent, and T. Coupez, Simulation numérique de l'orientation de bres en injection de thermoplastique renforcé, 17ème Congrès Français de Mécanique, 2005.

R. A. Schapery, Nonlinear viscoelastic and viscoplastic constitutive equations based on thermodynamics, Mechanics of Time-Dependent Materials, vol.1, p.209240, 1997.

R. A. Schapery, Nonlinear viscoelastic and viscoplastic constitutive equations with growing damage, International Journal of Fracture, vol.97, p.3366, 1999.

P. Shokri and N. Bhatnagar, Eect of packing pressure on bre orientation in injection molding of ber reinforced thermoplastics, Polymer Composites, vol.28, p.214223, 2007.

L. Sobczak, R. W. Lang, and A. Haider, Polypropylene composites with natural bers and wood -general mechanical property proles, Composites Science and Technology, vol.72, p.550557, 2012.

. Lang, Infrared thermographic techniques for non-destructive damage characterization of carbon bre reinforced polymers during tensile fatigue testing, International Journal of Fatigue, vol.28, p.13401347, 2006.

Y. Takao and M. Taya, The eect of variable ber aspect ratio on the stiness and thermal expension coecents of a short ber composite, Journal of Composites Materials, vol.21, issue.2, p.140156, 1987.

P. A. Templeton, Strength Predictions of Injection Molding Compounds, Journal of Reinforced Plastics and Composites, vol.9, issue.3, p.210225, 1990.
DOI : 10.1002/pc.750050111

C. Thiery, Tomographie à rayons x, 2002.

. Ph, C. Tordjeman, P. Robert, and . Gerard, The eect of alpha, beta crystalline structure on the mechanical properties of polypropylene, The European Physical Journal E, vol.4, pp.459-465, 2001.

F. G. Torres and M. L. Cubillas, Study of the interfacial properties of natural bre reinforced polyethylene, Polymer Testing, vol.24, p.694698, 2005.

L. Toubal, M. Karama, and B. Lorrain, Damage evolution and infrared thermography in woven composite laminates under fatigue loading, International Journal of Fatigue, vol.28, issue.12, p.18671872, 2006.
DOI : 10.1016/j.ijfatigue.2006.01.013

A. Valadez-gonzalez, J. M. Cervantes-uca, R. Olayo, and P. J. Herrera-franco, Eect of ber surface treatment on the ber-matrix bond strength of natural ber reinforced composites, Composites : Part B, vol.30, p.309320, 1999.

M. Vincent and J. F. Agassani, A study of glass ber orientation in ows of polymer composites, Proceedings of the UUPAC International Symposium on Interrelations Between Processing, Structure and Properties of Polymeric Materials, 1982.

G. Z. Voyiadjis and B. Deliktas, A coupled anisotropic damage model for inelastic response of composite materials, Computer methods in applied mechanics and engineering, vol.183, p.159199, 2000.

G. Z. Voyiadjis and P. I. Kattan, Advances in damage mechanics : metals and metal matrix composites. The Netherlands : Elvesier Science, 1999.

G. Z. Voyiadjis, Z. N. Taqieddin, and P. I. Kattan, Micromechanical approach to damage mechanics of composite materials with fabric tensors, Composites Part B : engineering, vol.38, p.862877, 2007.

P. Wambua, J. Ivens, and I. Verpoest, Natural bres : can they replace glass in bre reinforced plastics ?, Composites Science and Technology, vol.63, p.12591264, 2003.

B. Weber, B. Kenmeugne, J. C. Clement, and J. L. Robert, Improvements of multiaxial fatigue criteria computation for a strong reduction of calculation duration, Computational Materials Science, vol.15, issue.4, p.381399, 1999.
DOI : 10.1016/S0927-0256(98)00129-3

H. Welemane, Une modélisation des matériaux microssurés Application aux roches et aux bétons, 2002.

S. Youssef, E. Maire, and R. Gaertner, Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, p.719730, 2005.
DOI : 10.1016/j.actamat.2004.10.024

URL : https://hal.archives-ouvertes.fr/hal-00436799

X. P. Zhou, R. K. Li, X. L. Xie, and S. C. Tjong, Reinforcement of polypropylene using sisal bers grafted with poly (methyl methacrylate), Journal of Applied Polymer Science, vol.88, p.10551064, 2003.

Q. Zhu, Applications des approches d'homogénéisations à la modélisation tridimensionnalle de l'endommagement des matériaux quazi fragiles : formulations, validations et implémentations numeriques, 2006.