D. Bradley and K. Pitzer, Thermodynamics of electrolytes. 12. Dielectric properties of water and Debye-Hueckel parameters to 350.degree.C and 1 kbar, The Journal of Physical Chemistry, vol.83, issue.12, p.12, 1979.
DOI : 10.1021/j100475a009

J. Chervin, G. Syfosse, and J. Besson, Mechanical strength of sapphire windows under pressure, Review of Scientific Instruments, vol.21, issue.8, pp.82719-2725, 1994.
DOI : 10.1103/PhysRev.173.699

J. Dymond and R. Malhotra, The Tait equation: 100 years on, International Journal of Thermophysics, vol.51, issue.6, pp.941-951, 1988.
DOI : 10.2307/20023533

G. Neece and D. Squire, On the Tait and relate empirical equation of state, The Journal of Physical Chemistry, vol.78, pp.1128-136, 1968.

P. Tait, Physics and Chemistry of the Voyage of H, M.S. Challenger, vol.2, p.4, 1888.

J. Tilley, Understanding solids: the science of materials, p.446, 2004.
DOI : 10.1002/0470020849

F. Croccolo, Concentration dependent refractive index of a binary mixture at high pressure, The Journal of Chemical Physics, vol.135, issue.3, p.34901, 2011.
DOI : 10.1021/jp810292n

URL : https://hal.archives-ouvertes.fr/hal-00683950

H. Looyenga, Dielectric constants of homogeneous mixture, Molecular Physics, vol.9, issue.6, p.501, 1965.
DOI : 10.1039/jr9530003432

W. Li, Determination of the temperature and concentration dependence of the refractive index of a liquid mixture, The Journal of Chemical Physics, vol.60, issue.6, p.5058, 1994.
DOI : 10.1021/j100615a022

M. Tanaka, Recommended table for the density of water between 0 ??C and 40 ??C based on recent experimental reports, Metrologia, vol.38, issue.4, pp.301-309, 2001.
DOI : 10.1088/0026-1394/38/4/3

M. R. Querry, D. M. Wieliczka, and D. J. Segelstein, Handbook of optical constants of solids

J. E. Bertie and Z. D. Lan, The intensity of the OH stretching band of liquid water revisited, and the best current values of the optical constants of H2O(l) at 25°C between 15, pp.0-1

R. M. Pope and E. S. Fry, Absorption spectrum (380???700 nm) of pure water II Integrating cavity measurements, Applied Optics, vol.36, issue.33, pp.8710-8723, 1997.
DOI : 10.1364/AO.36.008710

E. J. Peterman, F. Gittes, and C. F. Schmidt, Laser-Induced Heating in Optical Traps, Biophysical Journal, vol.84, issue.2, pp.1308-1316, 2003.
DOI : 10.1016/S0006-3495(03)74946-7

P. Couty, Laser-induced break-up of water jet waveguide, Experiments in Fluids, vol.36, issue.6, pp.919-927, 2004.
DOI : 10.1007/s00348-003-0775-x

E. D. Palik, Handbook of optical constants of solids, Academic PR Edition, 1997.

J. A. Harrington, Infrared absorption in chemical laser window materials, Applied Optics, vol.15, issue.8, pp.1953-1959, 1976.
DOI : 10.1364/AO.15.001953

B. E. Saleh and M. C. Teich, Fundamentals of photonics, 2007.

J. Fourier, Théorie analytique de la chaleur, Edition Firmin Didot, père et fils, 1822.

W. Liu, J. He, M. Fan, P. Lu, and L. Shao, Deformation at room and low temperatures and martensite transformation in resistance spot welding duplex ? and ?(?) materials of 301L stainless steel, Journal of Material Science and Technology, vol.23, pp.3319-322, 2007.

S. Mahadevan, G. Gnanaprakash, J. Philip, B. P. Rao, and T. Jayakumar, X-ray diffractionbased characterization of magnetite nanoparticules in presence of goethite and correlation with magnetic properties, pp.20-25, 2007.

X. Ren, K. Sridharan, and T. R. Allen, Corrosion of ferritic???martensitic steel HT9 in supercritical water, Journal of Nuclear Materials, vol.358, issue.2-3, pp.227-234, 2006.
DOI : 10.1016/j.jnucmat.2006.07.010

D. H. Lister, R. D. Davidson, and E. Mcalpine, The mechanism and kinetics of corrosion product release from stainless steel in lithiated high temperature water, Corrosion Science, vol.27, issue.2, pp.113-140, 1987.
DOI : 10.1016/0010-938X(87)90068-0

B. Stellwag, The mechanism of oxide film formation on austenitic stainless steels in high temperature water, Corrosion Science, vol.40, issue.2-3, pp.2-3337, 1998.
DOI : 10.1016/S0010-938X(97)00140-6

A. Matthews, Magnetite formation by the reduction of hematite with iron under hydrothermal conditions, American Mineralogist, vol.6, pp.927-932, 1976.

D. L. De-faria, S. Silva, and M. T. De-oliveira, Raman microspectroscopy of some iron oxides and oxyhydroxides, Journal of Raman Spectroscopy, vol.28, issue.11, pp.873-878, 1997.
DOI : 10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B

L. J. Oblosky and T. M. Devine, A surface enhanced Raman spectroscopic study of the passive films formed in borate buffer on iron, nickel, chromium and stainless steel, Corrosion Science, vol.37, issue.1, pp.17-41, 1995.
DOI : 10.1016/0010-938X(94)00102-C

J. Dünnwald and A. Otto, An investigation of phase transitions in rust layers using raman spectroscopy, Corrosion Science, vol.29, issue.9, pp.1167-1176, 1989.
DOI : 10.1016/0010-938X(89)90052-8

S. Watanabe, M. Yamanaka, A. Sakai, K. Sawada, and T. Iwasa, Laser Raman Spectroscopic Study on Magnetite Formation in Magnetotactic Bacteria, MATERIALS TRANSACTIONS, vol.49, issue.4, pp.874-878, 2008.
DOI : 10.2320/matertrans.MER2007333

Z. Zeng, K. Natesan, and V. A. Maroni, Investigation of metal-dusting mechanism in Febase alloys using raman spectroscopy, X-ray diffraction and electron microscopy, Oxidation of Metals, vol.58, issue.2, p.1, 2002.

A. C. Ferrari and J. Robertson, Interpretation of Raman spectra of disordered and amorphous carbon, Physical Review B, vol.49, issue.230, p.20, 2000.
DOI : 10.1063/1.97476

A. C. Ferrari and J. Robertson, Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon, Physical Review B, vol.61, issue.269, p.75414, 2001.
DOI : 10.1063/1.108324

A. C. Ferrari and J. Robertson, Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.362, issue.1824, pp.2477-2512, 2004.
DOI : 10.1098/rsta.2004.1452

J. E. Maslar, W. S. Hurst, W. J. Bowers, J. H. Hendricks, M. I. Aquino et al., In situ Raman spectroscopic investigation of chromium surfaces under hydrothermal conditions, Applied Surface Science, vol.180, issue.1-2, pp.102-118, 2001.
DOI : 10.1016/S0169-4332(01)00338-5

M. Chen, J. Shu, and H. Mao, Xieite a new mineral of high-pressure FeCr

Y. Robert, Simulation numérique du soudage du TA6V par laser YAG impulsionnel : caractérisation expérimentale et modélisation des aspects thermomécanique associées à ce procédé, 2007.

H. Garbacz and M. Lewandowska, Microstructural changes during oxidation of titanium alloys, Materials Chemistry and Physics, vol.81, issue.2-3, pp.542-547, 2003.
DOI : 10.1016/S0254-0584(03)00070-1

A. Soveja, E. Cicala, D. Grevey, and J. M. Jouvard, Optimisation of TA6V alloy surface laser texturing using an experimental design approach, Optics and Lasers in Engineering, vol.46, issue.9, pp.671-678, 2008.
DOI : 10.1016/j.optlaseng.2008.04.009

URL : https://hal.archives-ouvertes.fr/hal-00453092

M. Boivineau, Thermophysical Properties of Solid and Liquid Ti-6Al-4V (TA6V) Alloy, International Journal of Thermophysics, vol.14, issue.-207, pp.507-529, 2006.
DOI : 10.6028/jres.075A.001

M. Dondi, The role of counterions (Mo, Nb, Sb, W) in Cr-, Mn-, Ni- and V-doped rutile ceramic pigments, Ceramics International, vol.32, issue.4, pp.393-405, 2006.
DOI : 10.1016/j.ceramint.2005.03.015

M. V. Diamanti and M. P. Pedeferri, Effect of anodic oxidation parameters on the titanium oxides formation, Corrosion Science, vol.49, issue.2, pp.939-948, 2007.
DOI : 10.1016/j.corsci.2006.04.002

R. S. Graves, T. G. Kollie, D. L. Mcelroy, and K. E. Gilchrist, The thermal conductivity of AISI 304L stainless steel, International Journal of Thermophysics, vol.31, issue.2, pp.409-415, 1991.
DOI : 10.1007/BF00500761

R. Siab, Effect of an electrodeposited yttrium containing thin film on the high-temperature oxidation behaviour of TA6V alloy, Applied Surface Science, vol.253, issue.7, pp.3425-3431, 2007.
DOI : 10.1016/j.apsusc.2006.07.057

X. Z. Ding, X. H. Liu, and Y. Z. He, Grain size dependence of anatase-to-rutile structural transformation in gel-derived nanocrystalline titania powders, Journal of Materials Science Letters, vol.29, issue.20, pp.1789-1791, 1996.
DOI : 10.1007/BF00275343

Y. Hu, H. L. Tsai, and C. L. Huang, Effect of brookite phase on the anatase???rutile transition in titania nanoparticles, Journal of the European Ceramic Society, vol.23, issue.5, pp.691-696, 2003.
DOI : 10.1016/S0955-2219(02)00194-2

V. Swamy, Size-dependent modifications of the first-order Raman spectra of nanostructured rutile TiO 2, Physical Review B, vol.77, 2008.

V. Samuel, R. Pasricha, and V. Ravi, Synthesis of nanocrystalline rutile, Ceramics International, vol.31, issue.4, pp.555-557, 2005.
DOI : 10.1016/j.ceramint.2004.07.003

A. Jaroenworaluck, Macro, micro and nanostructure of TiO2 anodised films prepared in a fluorine-containing electrolyte, Journal of Materials Science, vol.20, issue.16, pp.6729-6734, 2007.
DOI : 10.1007/s10853-006-1474-9

Y. Wouters, A. Galerie, and J. P. Petit, Thermal oxidation of titanium by water vapour, Solid State Ionics, vol.104, issue.1-2, pp.89-96, 1997.
DOI : 10.1016/S0167-2738(97)00400-1

J. L. Murray and H. A. Wriedt, The O-Ti (Oxygen-Titanium) System, Bulletin of Alloy Phase Diagrams, pp.148-155, 1987.

M. Grigore, Mineral reactions during coke gasification with carbon dioxide, International Journal of Coal Geology, vol.75, issue.4, pp.213-224, 2008.
DOI : 10.1016/j.coal.2008.05.022