Déformation plastique, Éléments de Métallurgie Physique, 1986. ,
Dispersion strengthening of intermetallics, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 1997. ,
DOI : 10.1016/S0921-5093(97)00167-6
High temperature creep behavior of oxide dispersion strengthened NiAl intermetallics, Acta Materialia, vol.46, issue.8, pp.2717-2727 ,
DOI : 10.1016/S1359-6454(97)00474-6
Propriétés mécaniques d'alliages ODS à basefer élaborés par mécanosynthèse et consolidation à chaud, Annales de Chimie et de Sciences des Matériaux, pp.423-433, 1997. ,
A review of the mechanical properties of 82 compounds, Materials Science and Engineering, pp.192-193, 1995. ,
Mechanical properties of FeAl, International Materials Reviews, vol.42, pp.8-205, 1997. ,
Hydrogen in iron aluminides, Journal of Alloys and Compounds, vol.330, issue.332, pp.330-332, 2002. ,
DOI : 10.1016/S0925-8388(01)01630-9
Texture analysis of oxide dispersion strengthened (ODS) Fe alloys by X-rry and neutron dffiaction, Journal de Physique IV, vol.97, pp.155-163, 2002. ,
Recrystallisation of practical mechanically alloyed iron-base and nickel-base superalloys, Materials Science and Engineering: A, vol.223, issue.1-2, pp.64-77, 1997. ,
DOI : 10.1016/S0921-5093(96)10507-4
Mechanically alloyed metals, Materials Science and Technology, vol.1, issue.11-12, pp.1404-141, 2000. ,
DOI : 10.1016/0025-5416(84)90180-0
Environmental sensitivity and mechanical behavior of boron-doped Fe-4îat.%oAl intermetallic in the temperature rangefrom 77 to 1000 K, Materials Science and Engineering, 1999. ,
Heterogeneous deformation and recrystallization of iron base oxide dispersion strengthened PM 2000 alloy, Materials Science and Technology, vol.17, pp.693-699, 2001. ,
strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM 2000 alloy, Materials Science and Engineering, vol.316, pp.16-165, 2001. ,
Effect of treatment temperature on the texture of mechanically alloyed Fe-40at.%oAl+Y2Oj intermetallic, Materials Letters, vol.41, pp.283-288, 1999. ,
Grain control in mechanically alloyed oxide dispersion strengthened MA 957 steel, Materials Science and Technology, vol.24, issue.10, pp.890-897, 1993. ,
DOI : 10.1007/BF02656499
Room-temperature mechanical behavior of FeAl : fficts of stoichiometry, environment and boron addition, Acta Materialia, Yol, vol.46, pp.76245-6256 ,
Ch. I -Approche bibliographique [CRIMP 86Effect of boron on the tensile properties of 82 FeAl, Materials Science and Engineering, vol.58, pp.193-200, 1986. ,
Room temperature tensile ductility in powder processed 82 FeAl alloys, Proceedings of the Materials Research Society, pp.499-504 ,
Current issues in recrystallization: a review, Materials Science and Engineering, vol.238, pp.219-246, 1997. ,
Nanostructures in thermal sprcry coatings, Scripta Materialia, vol.48, pp.1-599, 2003. ,
High temperature structural coarsening of an ODS FeAl intermetallic, Intermetallics, vol.11, issue.5, p.10, 2003. ,
DOI : 10.1016/S0966-9795(03)00017-7
Ségrégation intergranulaire du bore dans Fe- 4haL%oAl de structure 82 : influence d'une interaction entre lactmes thermiques et atomes de bore, Journal de Physique IV Journal de Physique III, vol.6, issue.2, pp.153-154, 1996. ,
litude de t'ffit du bore sur les alliages FeAl ordonnés de structure.B2, Thèse de Doctorat de l'Institut National Polytechnique de Grenoble et de l'École Nationale Supérieure des Mines de Saint-Étienne, 1998. ,
Influence of testing environment on the room temperature ductility of FeAI alloys, Scripta Metallurgica et Materiali4, pp.1281-1284, 1990. ,
Oxidation of NiAl and FeAl, Intermetallics, vol.7, issue.10, pp.1153-1158, 1999. ,
DOI : 10.1016/S0966-9795(99)00037-0
Microstructural development in dispersion strengthened NiAt produced by mechanical alloying and secondary recrystallization, Nol, vol.45, pp.201-211, 1997. ,
Recovery, recrystallization and grain growth in Fes.4l-based alloys, lntermetallics, vol.0, pp.473-484, 2002. ,
Recrystallization and related annealing phenomena, 1996. ,
A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures???I. The basic model, Acta Materialia, vol.45, issue.10, pp.423-4240, 1997. ,
DOI : 10.1016/S1359-6454(97)00070-0
A mified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures -IL The ffict of second phasè particles, Acta Metallurgica, vol.45, pp.5031-5039, 1997. ,
Fine-grained alloys by thermomechanical processing, Current Opinion in Solid State and Materials Science, vol.5, issue.1, pp.15-21, 2001. ,
DOI : 10.1016/S1359-0286(00)00020-6
Relationship between mechanism of deformation and developrnent of dynanic recrystallization in FeAl intermetallic, Materials Science and Engineering, pp.128-133, 1995. ,
Deformation textures in Fey4l alloys : an assessment of dominant slip system activity in the 900-1325 K temperature range of hot working, Acta Materialia, vol.45, pp.4-1333, 1997. ,
Coupled FEM and texture modelling of plane strain extrusion of an aluminium alloy, Références IAUKRUST 97, p.725 ,
Texture analysis in material science, Butterworths London, 1982. ,
Quantitative texture analysis, 1982. ,
Essais mécaniques des métauc -Détermination des lois de comportement ,
The elastic behavior of a crystalline aggregate, Proceedings of the Physical Society of London, pp.349-354, 1952. ,
EBSP, Progress in Technique and Applications, Textures and Microstructures, vol.20, issue.1-4, pp.29-40, 1993. ,
DOI : 10.1155/TSM.20.29
Amethodfor the determination of the active slip systems and orientation changes during single crystal deformationQuantitative metallograplry by electron backscattered dffiaction, Proceedings of the 56 International Conference on Textures of Materials édité, pp.265-275, 1978. ,
Review, Journal of the Royal Musical Association, vol.122, issue.1, pp.3833-3854, 2001. ,
DOI : 10.1093/jrma/122.1.127
Automatic EBSP Analysis for Recrystallization Studies, Textures and Microstructures, vol.20, issue.1-4, pp.55-65, 1993. ,
DOI : 10.1155/TSM.20.55
Advances in automatic EBSP single orientation mec$uremenfi, Textures and Microstructures, vol.20, pp.4-54, 1993. ,
The elastic stiffness coefficients of iron-aluminum alloys???I experimental results and thermodynamic analysis, Acta Metallurgica, vol.15, issue.12, pp.1827-1838, 1967. ,
DOI : 10.1016/0001-6160(67)90047-8
Texture, microstructure and properties in mechanically alloyed and extruded FeAl, Proceedings of the l2th lnternational Conference on Textures of Materials (ICOTOM l2), édité par J.A. Szpunar, pp.683-688, 1999. ,
Texture, microstructure et propriétés d'tm alliage Fe-40A1 à grains fins obtenu par métallurgie des poudres et extrusion : influence des paramètres du procédé et de traitements thermiques ,
Propriétés et applications des aUiages intermétalliques ByFeAl, Journal de Physique IV Journal de Physique III, vol.6, issue.2, pp.28-289, 1996. ,
The Determination of Local Texture by Electron Diffraction???A Tutorial Review, Textures and Microstructures, vol.20, issue.1-4, pp.7-27, 1993. ,
DOI : 10.1155/TSM.20.7
Plastic strain in metals, Journal of the Institute of Metals, Yol, vol.62, pp.307-324 ,
Effects of Thermomechanical Processing on Texture Formation in Iron Aluminides, Materials Science Forum, vol.426, issue.432, pp.426-432, 2003. ,
DOI : 10.4028/www.scientific.net/MSF.426-432.3593
HIPing advances to benefit PM, Metal powder Report, vol.54, pp.26-30, 1999. ,
Four decades of HIP progre.rs, Metal powder Report, vol.55, pp.14-21, 2000. ,
Déformation plastique, Éléments de Métallurgie Physique ,
Recrystallisation of practical mechanically alloyed iron-base and nickel-base superalloys, Materials Science and Engineering: A, vol.223, issue.1-2, pp.64-77, 1997. ,
DOI : 10.1016/S0921-5093(96)10507-4
Grain growth in high-purity aluminium and in an oluminium-magnesium alloy, Transactions of the Metallurgical Society AIME, vol.175, pp.372-394 ,
Deformation mechanics in a mechanically alloyed Fe40Al alloy and the influence of recrystallizing and ageing heat treatments, Acta Materialia, vol.45, issue.12, pp.4939-4952, 1997. ,
DOI : 10.1016/S1359-6454(97)00196-1
Some factors affecting the rate of grain growth in metals, Transactions of the Metallurgical Society AIME, vol.180, pp.73-91, 1949. ,
Recrystallization and grain growth, Progress in Metal physics, pp.220-292, 1952. ,
DOI : 10.1016/0502-8205(52)90009-9
Heterogeneous deformation and recrystallization of iron base oxide dispersion strengthened pM 2000 alloy, Materials Science and Technology, vol.17, pp.693-699, 2001. ,
Strain heterogeneity and the production of coarse grains in mechanically alloyed iron-based PM2000 alloy, Materials Science and Engineering: A, vol.316, issue.1-2, pp.161-165, 2001. ,
DOI : 10.1016/S0921-5093(01)01234-5
Grain control in mechanicatty alloyed oxide dispersion strengthened MA957 steel, Materials Science and Technology, vol.9, pp.90-97 ,
Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio, Materials Science and Engineering: A, vol.272, issue.1, pp.1-63, 1999. ,
DOI : 10.1016/S0921-5093(99)00455-4
Grain growth in Fe-30at.%oAlGrain growth kinetics of an iron aluminide alloy, Scripta Materialia Scripta Metallurgica et Materialia, vol.35, issue.30, pp.615-621, 1996. ,
Texture evolution in NiAl, Materials Science and Engineering, pp.1-87, 1998. ,
The influence of texture on thecreepbehaviourof theODsnickel-basealloyPMl000, ScriptaMaterialia, vol.3, issue.l0, pp.1365-1370 ,
The plasticity of particle-containing polycrystals, IHUMPHREYS 96, pp.917-930, 1990. ,
DOI : 10.1016/0956-7151(90)90164-C
Vacancy formation and effects in FeAl, Intermetallics, vol.11, issue.6, pp.507-528, 2003. ,
DOI : 10.1016/S0966-9795(03)00027-X
Deformation textures in Fell alloys: an assessment of dominant slip systemactivity in the 900-1325 Ktemperature range of hot workingPrefered orientations in extruded nickel and iron aluminides, IKOCKS 98] Kocks U.F., Tomé C.N., Wenk H.R.: "Texture and anisotropy -Preferred orientations in polycrystals and their ffict on materials properties, pp.1333-13279, 1990. ,
Texture, microstructure and properties in mechanically atloyed and extruded FeAITexture, microstructure et propriétés d'un alliage Fe-40A1 à grains fins obtenu par métallurgie des poudres et extrusion : influence des paramètres du procédé et de traitements thermiques, Proceedings of the l2th International Conference on Textures of Materials (ICOTOM 12), édité par J.A. SzpunarPropriétés et applications des alliages intermétalliques B2-FeAl, pp.683-688281, 1996. ,
Strength and ductility of Fe???40Al alloy prepared by mechanical alloying, Materials Science and Engineering: A, vol.208, issue.1, pp.7-19, 1996. ,
DOI : 10.1016/0921-5093(95)10041-5
Thermomechanical processing of mechanically' alloyed Fe-40A1 and the influence onmechanical propertiesThe importance of textures for determining the mechanical behaviour of intermetallicsCreep deformation of oxide dispersion strengthened Fe' 40Al intermetallic : thermal and athermal contributions, Scripta Materialia, Yol.37, Nol; PP, pp.7-77, 1997. ,
Effect of cooling rate on hardness of FeAl and NiAl, Metallurgical Transactions A, vol.133, issue.8, pp.2281-2282, 1990. ,
DOI : 10.1557/PROC-133-755
On the Zener drag, Acta Metallurgica, vol.33, issue.1, p.22, 1985. ,
DOI : 10.1016/0001-6160(85)90214-7
Control of recrystallization in a Bz iron aluminide alloy, Thèse de Doctorat de l, 1997. ,
Étude du durcissement par trempe des alliages ordonnés Fe-Al de type L2o, Mémoires Scientifiques de la Revue de Métallurgie, pp.869-880, 1969. ,
IV -Influence d'un traitement de recristallisation statique ISAMAJDAR 98] Samajdar IRecrystallization and grain growth in a 82 iron aluminide alloy, Intermetallics, vol.6, pp.419-425 ,
Modelling of recrystallization in mechanicatly alloyed mater ials, Materials Science and Engineering, vol.223, pp.9-99, 1997. ,
Recrystallization in NiAl, proceedings of the First Joint International Conference, Recrystallization and Grain Growth, pp.1365-1370, 2001. ,
Abnormal grain growth in textured FeAl intermetallics, Materials Science and Engineering: A, vol.152, issue.1-2, pp.335-340, 1992. ,
DOI : 10.1016/0921-5093(92)90087-H
High+emperature strength and creep resistance of FeAI, Materials Science and Engineering, vol.3, issue.57, pp.124-133, 2003. ,
Deformation and Recrystallization Texture of Extruded NiAl, Materials Science Forum, vol.273, issue.275, pp.273-275 ,
DOI : 10.4028/www.scientific.net/MSF.273-275.411
Creep mechanisms offerritic oxide dispersion strengthened alloys, Journal of Materials processing Technology, vol.33, pp.218-224, 2003. ,
DOI : 10.1016/s0924-0136(02)00237-6
Controlled depth penetration X-Rcy Dffiaction measuremenf, Materials Science Forum, pp.40-412, 2002. ,
Texture analysis of thin films and surface layers by low incidence angle X-Ray Dffiaction, Proceedings of the 37s Annual Conference on Applications of X-Ray analysis (Advances in X-Ray analysis), édité par C.S. Banett, J.V. Gilfrich, R ,
X-Ray potefigure keeping a constant thickness of measurement, Proceedings of the llth International Conference on Textures of Materials (ICoroM I l), édité par z.Liang,L. zuo, y. chuo, pp.16-121, 1996. ,
Comparison of texture data measured by EBSD and conventional X-Ray Dffiaction, Proceedings of the l2th International Conference on Textures of Materials (ICOTOM l2),édité parJ.A. Szpunar, pp.2-7, 1999. ,
Propri??t??s et applications des alliages interm??talliques B2-FeAl, Le Journal de Physique IV, vol.06, issue.C2, pp.281-289, 1996. ,
DOI : 10.1051/jp4:1996240
Texture heterogeneities and their determination", The Physics of Metals and Metallography ,