J. Beck, Transient temperatures in a semi-infinite cylinder heated by a disk heat source, International Journal of Heat and Mass Transfer, vol.24, issue.10, pp.1631-1640, 1981.
DOI : 10.1016/0017-9310(81)90071-5

C. Taylor, &. Francis, B. Raton, J. Brackbill, D. Kothe et al., A continuum method for modeling surface tension, J. Comp. Phys, vol.100, pp.335-354, 1992.

C. Multiphysics®-das, S. Klotz, M. , and K. , Version 4 EDM simulation: finite element-based calculation of deformation, microstructure and residual stress, 3a. COMSOL AB, Sweden. Journal of Materials Processing Technology, vol.142, pp.434-451, 2003.

S. Dhanik and S. Joshi, Modeling of a Single Resistance Capacitance Pulse Discharge in Micro-Electro Discharge Machining, Journal of Manufacturing Science and Engineering, vol.1, issue.4, pp.759-767, 2005.
DOI : 10.1016/j.jmatprotec.2003.10.035

D. Dibitonto, T. Eubank, R. Patel, and A. Barrufet, Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model, Journal of Applied Physics, vol.133, issue.9, pp.4095-4103, 1989.
DOI : 10.1063/1.335618

D. Dibitonto, R. Patel, A. Barrufet, T. Eubank, T. Eubank et al., Theoretical models of the electrical discharge machining process. II. The anode erosion model, J. Appl. Phys, vol.66, issue.9, pp.4104-4111, 1989.

C. Pandey, J. Patel, R. Barrufet, A. Eubank, T. Dibitonto et al., Theoretical models of the electrical discharge machining process. II. The anode erosion model, EDM Precision En, pp.104-110, 1986.

P. Mohan, S. Sarkar, S. Chakraborty, G. Phanikumar, P. Dutta et al., Modelling of transport phenomena in laser surface alloying with distributed species mass source Surface tension of binary metal-surface active solute systems under conditions relevant to welding metallurgy Numerical study of thermal aspects of electric discharge machining process Int, Int. J. Heat Fluid Flow Metall. Trans. B J. Machine Tools Manufact, vol.23, issue.46, pp.298-307, 1988.

R. Snoeys, V. Dijck, and F. , Singh A and Ghosh A 1999 Thermo-electric model of material removal during electric discharge machining Investigation of electro discharge machining operations by means of thermo-mathematical model CIRP Ann Traidia A, Roger F and Guyot E 2010 Optimal parameters for pulsed gas tungsten arc welding in partially and fully penetrated weld pools, Comparison of measured and simulated crater morphology for EDM. In: 14th International Symposium on Electromachining (ISEM XIV) Journal of Materials Processing TechnologyVan1974] Van Dijck S and Dutre L 1974 Heat conduction model for the calculation of the volume of molten metal in electric discharges J. Phys. D: Appl. Phys, pp.316-322, 1971.

Y. Wang and H. Tsai, Impingement of filler droplets and weld pool dynamics during gas metal arc welding process, International Journal of Heat and Mass Transfer, vol.44, issue.11, pp.2067-2080, 2001.
DOI : 10.1016/S0017-9310(00)00252-0

R. Wood and G. Geist, Modeling of nonequilibrium melting and solidification in laser-irradiated materials, Physical Review B, vol.39, issue.4, pp.2606-2620, 1986.
DOI : 10.1063/1.92862

J. Xie and A. Kar, Mathematical modeling of melting during laser materials processing, Journal of Applied Physics, vol.79, issue.7, pp.3015-3022, 1997.
DOI : 10.1016/0257-8972(95)02441-7

J. Guoa, X. Wanga, and B. Xu, One-step synthesis of carbon-onion-supported platinum nanoparticles by arc discharge in an aqueous solution, Materials Chemistry and Physics, vol.113, issue.1, pp.179-182, 2008.
DOI : 10.1016/j.matchemphys.2008.07.039

J. Hieda, N. Saito, and O. Takai, Exotic shapes of gold nanoparticles synthesized using plasma in aqueous solution, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.26, issue.4, pp.854-679, 1991.
DOI : 10.1116/1.2919139

I. Koo, M. Lee, J. Shim, J. Ahn, and W. Lee, Platinum nanoparticles prepared by a plasma-chemical reduction method, Boguslavskii L, Smal'ko A and Zubenko A 2007 Obtaining Nanocarbon Using the Electric-Discharge Treatment Method of Organic Liquids Surf. Eng, pp.4125-4128, 2005.
DOI : 10.1149/1.1612503

. Phys, T. Okada, T. Kaneko, and R. Hatakeyama, Conversion of toluene into carbon nanotubes using arc discharge plasmas in solution Thin Solid Films, pp.43-323001, 2007.

N. Sano, H. Wang, I. Alexandrou, M. Chhowalla, K. Teo et al., Properties of carbon onions produced by an arc discharge in water, Journal of Applied Physics, vol.228, issue.5, pp.2783-2788, 2002.
DOI : 10.1063/1.123833

N. Sano, N. Sano, T. Kikuchi, H. Wang, M. Chhowalla et al., synthesis of single-walled carbon nanohorns using the arc in water method with gas injection J. Phys. D: Appl. Phys Carbon nanohorns hybridized with a metal-included nanocapsule Carbon, Mater. Chem. Phys, vol.37, issue.99, pp.95-99, 2004.

N. Babaeva, . Yu, and M. J. Kushner, Structure of positive streamers inside gaseous bubbles immersed in liquids, VII.7 ? Références, p.132003, 2009.
DOI : 10.1088/0022-3727/42/13/132003

. Bar1996, P. Barmann, S. Kroll, and A. Sunesson, Spectroscopic measurments of streamer filaments in electric breakdown in a dielectric liquid, J. Phys. D: Appl. Phys, vol.29, pp.1188-1196, 1996.

N. Bonifaci, A. Denat, and P. Frayssines, Application de la spectroscopie d?????mission ?? l?????tude des d??charges ??lectriques dans les liquides, Journal of Electrostatics, vol.64, issue.7-9, pp.445-449, 2006.
DOI : 10.1016/j.elstat.2005.10.033

A. Descoeudres, H. Ch, R. Demellayer, and G. Walder, Optical emission spectroscopy of electrical discharge machining plasma, Journal of Physics D: Applied Physics, vol.37, issue.6, pp.875-882, 2004.
DOI : 10.1088/0022-3727/37/6/012

A. Giacomo, R. Gaudiuso, and D. '. , Aglio M and Santagata A 2010 The role of continuum radiation in laser induced plasma spectroscopy Spectrochimia Acta Part, pp.385-394

M. Gigosos and V. Cardenoso, New plasma diagnosis tables of hydrogen Stark broadening including ion dynamics, Journal of Physics B: Atomic, Molecular and Optical Physics, vol.29, issue.20, pp.4795-4838, 1996.
DOI : 10.1088/0953-4075/29/20/029

M. Gigosos, M. Gonzalez, and V. Cardenoso, Computer simulated Balmer-alpha, -beta and -gamma Stark line profiles for non-equilibrium plasmas diagnostics, Spectrochimica Acta Part B: Atomic Spectroscopy, vol.58, issue.8, pp.1489-1504, 2003.
DOI : 10.1016/S0584-8547(03)00097-1

H. Griem, Principles of Plasma Spectroscopy. Cambridge Monographs on Plasma Physics, 1997.

H. Griem, J. Halenka, and W. Olchawa, Comparison of hydrogen Balmeralpha Stark profiles measured at high electron densities with theoretical results, J. Phys. B: At, 2005.

J. Hermann, C. Boulmer-leborgne, and D. Hong, Diagnostics of the early phase of an ultraviolet laser induced plasma by spectral line analysis considering self-absorption, Journal of Applied Physics, vol.83, issue.2, p.691, 1998.
DOI : 10.1063/1.361019

E. Kemsley and P. Belton, Simulated emission spectra of samples at non-uniform temperature based on numerical solutions of the general radiative transfer equation, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol.51, issue.3, p.371, 1995.
DOI : 10.1016/0584-8539(94)00122-R

H. Phyllips, H. Lancaster, M. Denton, K. Rozsa, and P. Apai, Self-Absorption in Copper Hollow Cathode Discharges: Effects on Spectral Line Shape and Absorption Sensitivity, Applied Spectroscopy, vol.15, issue.3, p.572, 1988.
DOI : 10.1007/BF00612139

. Sak2002, T. Sakka, T. Nakajima, and O. , Spatrial population distribution of laser ablation species determined by self-reversed emission line profile, J. Appl. Phys, vol.92, issue.5, pp.2296-2303, 2002.

J. H. Tortai, N. Bonifaci, and A. Denat, Diagnostic of the self-healing of metallized polypropylene film by modeling of the broadening emission lines of aluminum emitted by plasma discharge, Journal of Applied Physics, vol.6, issue.5, p.53304, 2005.
DOI : 10.1063/1.344373

J. Yang, A. Sasoh, and K. Takayama, The reflection of a shock wave over a cone, Shock Waves, vol.60, issue.5, pp.267-273, 1996.
DOI : 10.1299/kikaib.60.473

A. Hamdan, C. Noël, and F. Kosior, Impacts created on various materials by micro-discharges in heptane: Influence of the dissipated charge, Journal of Applied Physics, vol.113, issue.4, p.43301
DOI : 10.1007/s00339-004-2590-5

URL : https://hal.archives-ouvertes.fr/hal-01284939

A. Hamdan, J. Audinot, C. Noël, and F. Kosior, Interaction of micro-discharges in heptane with metallic multi-layers, Applied Surface Science, vol.274, pp.378-391
DOI : 10.1016/j.apsusc.2013.03.074

URL : https://hal.archives-ouvertes.fr/hal-01284936

A. Hamdan, C. Noël, and F. Kosior, Gérard Henrion and Thierry Belmonte Dynamics of bubbles created by plasma in heptane for micro-gap conditions, 2013.

A. Hamdan, C. Noël, and J. Ghanbaja, Synthesis of platinum embedded in amorphous carbon by micro-gap discharge in heptane, Materials Chemistry and Physics, vol.142, issue.1, pp.199-206
DOI : 10.1016/j.matchemphys.2013.07.006

URL : https://hal.archives-ouvertes.fr/hal-01284944

A. Hamdan and F. Kosior, Plasma-surface interaction in heptane, Journal of Applied Physics, vol.113, issue.21, p.213303
DOI : 10.1116/1.4766929

URL : https://hal.archives-ouvertes.fr/hal-01284948

A. Hamdan, J. Audinot, S. Migot-choux, C. Noel, F. Kosior et al., Interaction of discharges in heptane with carpets of carbon nanotubes, Advanced Engineering Materials, vol.15, pp.885-892

A. Hamdan and C. Noël, Streamer-Surface Interaction in Heptane with Micro-Gaps, Advanced Materials Research, vol.324, pp.89-92
DOI : 10.4028/www.scientific.net/AMR.324.89

A. Hamdan, I. Marinov, A. Rousseau, and T. Belmonte, Shadowgraph characterization of discharge in heptane with micro-gap condition