A. Ahajji, P. N. Diuopf, F. Aloui, I. Elbakali, D. Perrin et al., Influence of heat treatment on antioxidant properties and coulor stability of beech and spruce wood and their extractives. Wood Science and Technology DOI 10, pp.226-234, 1007.

O. Allegretti, M. Brunetti, I. Cuccui, S. Ferrari, M. Nocetti et al., Thermovacuum modification of spruce (picea abies karst.) and fir (abies albamill.) wood, BioResources, vol.7, pp.3656-3669, 2012.

M. H. Akyildiz and S. Ates, Effect of heat treatment on equilibrium moisture content (EMC) on some wood species in Turkey, Res. J. Agri. Biol. Sci, vol.4, issue.6, pp.660-665, 2008.

N. Amusant, C. Moretti, B. Richard, E. Prost, J. M. Nuzillard et al., Chemical compounds from Eperua falcata and Eperua grandiflora heartwood and their biological activities against wood destroying fungus (Coriolus versicolor) Holz als Roh und Werkstoff, pp.23-28, 2007.

B. Andersons, J. Chirkova, I. Andersone, and I. Irbe, Prediction of the properties of soft decidious wood in thermal modification, Workshop Cost Action FP0904, pp.96-97, 2012.

A. Standard, Standard test method for ethanol toluene solubility of wood. Norme n°04, pp.1107-96, 1998.

F. Avat, Contribution à l'étude des traitements thermiques du bois (20-300°C): transformations chimiques et caractérisations physico-chimiques, 1993.

B. F. Bakara, S. Hizirogluc, P. Tahira, and . Md, Properties of some thermally modified wood species, Materials & Design, vol.43, pp.348-355, 2013.
DOI : 10.1016/j.matdes.2012.06.054

K. M. Bhat, P. K. Thulasidas, M. Florence, E. J. Jayaraman, and K. , Wood durability of home-garden teak against brown-rot and white-rot fungi, Trees, vol.33, issue.6, pp.654-660, 2005.
DOI : 10.1163/22941932-90000678

P. Bekhta and P. Niemz, Effect of high temperature on the change in color, dimensional stability and mechanical properties of spruce woo, Holzforschung, vol.57, issue.5, pp.539-546, 2003.

C. Bengtsson, J. Jermer, and F. Brem, Bending strength of heat-treated spruce and pine timber, International Research Group Wood Pre, Section 4-Processes, pp.2-40242, 2002.

M. T. Bhuiyan, N. Hirai, and N. Sobue, Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions, Journal of Wood Science, vol.35, issue.6, pp.431-436, 2000.
DOI : 10.1002/pol.1962.1205916813

T. Bhuiyan and N. Hirai, Study of crystalline behavior of heat-treated wood cellulose during treatments in water, Journal of Wood Science, vol.51, issue.1, pp.42-47, 2005.
DOI : 10.1007/s10086-003-0615-x

M. Boonstra, B. Tjeerdsma, and H. Groeneveld, Thermal modification of nondurable wood species. 1. The Plato technology: thermal modification of wood, International Research Group Wood Pre, Section 4 -Processes. 29 Annual Meeting, 1998.

K. Borgin and K. Corbett, The stability and weathering properties of wood treated with various oils, Plast Paint Rubber, vol.14, issue.5, pp.69-72, 1970.

J. Bourgois and R. Guyonnet, Characterisation and analysis of torrefied wood. Wood Science and Technology, pp.143-155, 1988.

J. Bourgeois, M. C. Bartholin, and R. Guyonnet, Thermal treatment of wood: analysis of the obtained product, Wood Science and Technology, vol.155, issue.291, pp.303-310, 1989.
DOI : 10.1007/978-94-011-6017-9

N. Brosse, R. Hage, M. Chaouch, M. Pétrissans, S. Dumarçay et al., Investigation of the chemical modifications of beech wood lignin during heat treatment, Polymer Degradation and Stability, vol.95, issue.9, 2010.
DOI : 10.1016/j.polymdegradstab.2010.05.018

P. Chanrion and J. Schreiber, Les différents procédés, Bois traité par haute température. Edition CTBA, 2002.

M. Chaouch, M. Pétrissans, A. Pétrissans, and P. Gérardin, Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species, Polymer Degradation and Stability, vol.95, issue.12, pp.2255-2259, 2010.
DOI : 10.1016/j.polymdegradstab.2010.09.010

M. Chaouch, Effet de l'intensité du traitement sur la composition élémentaire et la durabilité du bois traité thermiquement : développement d'un marqueur de prédiction de la résistance aux champignons basidiomycètes, Thèse de l'Université henri Poincaré Nancy 1, 2010.

B. Courtois, H. Sageot, and E. Heisel, Produits de traitements du bois : composition, dangers, mesures de préventions. INRS (institut national de recherche et de sécurité, 2006.

S. Desobry and E. Barthelemy, Etat des connaissances relatives aux traitements des matériaux en bois au contact du vin et des boissons alcoolisées, 2006.

T. Dilik and S. Hiziroglu, Bonding strength of heat treated compressed Eastern redcedar wood, Materials & Design, vol.42, pp.317-320, 2012.
DOI : 10.1016/j.matdes.2012.05.050

D. Dirol and R. Guyonnet, The Improvement of Wood Durability by Retification Process, International Research Group on Wood Protection, 1993.

S. Doi, K. Hanata, E. Kamonji, and Y. Miyazaki, The international Research Group on Wood Preservation, pp.6-10, 2004.

L. Duchez and R. Guyonnet, Optimization of wood retification by fractional factorial design (in French)., Analusis, vol.26, issue.8, pp.39-44, 1998.
DOI : 10.1051/analusis:199826080039

K. Edvarsden and K. Sandland, Increased drying temperature -Its influence on the dimensional stability of wood. Holz als Roh und Werkstoff, pp.207-209, 1999.

B. Esteves, I. Domingos, and H. Pereira, ) a. Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200ºC, For. Prod. J, vol.57, issue.12, pp.47-52, 2007.

B. Esteves, A. Velez-marques, I. Domingos, and H. Pereira, Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Science and Technology, pp.193-207, 2007.

B. Esteves and H. Pereira, Qualit??tsbewertung von w??rmebehandeltem Holz mittels NIR-Spektroskopie, Holz als Roh- und Werkstoff, vol.13, issue.6, pp.323-332, 2008.
DOI : 10.1255/jnirs.311

B. M. Esteves, I. J. Domingos, and H. M. Pereira, Pine wood modification by heat treatment in air, BioResources, vol.3, issue.1, pp.142-154, 2008.

B. Esteves, J. Graça, and H. Pereira, Extractive composition and summative chemical analysis of thermally treated eucalypt wood, Holzforschung, vol.32, issue.3, pp.344-351, 2008.
DOI : 10.1016/j.buildenv.2005.07.017

B. Esteves, A. Velez-marques, I. Domingos, and H. Pereira, Heat-induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood, Wood Science and Technology, vol.58, issue.7, pp.369-384, 2008.
DOI : 10.1007/s00226-007-0157-2

J. Follrich, U. Muller, and W. Gindl, Auswirkungen einer thermischen Modifikation auf die Adh??sion zwischen Fichtenholz (Picea abies Karst.) und einem Thermoplasten, Holz als Roh und Werkstoff, pp.373-376, 2006.
DOI : 10.1007/s00107-006-0107-y

E. Frühwald, Einfluss von Hochtemperaturtrocknung auf Eigenschaften von Fichte und L??rche, Holz als Roh- und Werkstoff, vol.29, issue.8, 2007.
DOI : 10.1007/s00107-007-0174-8

V. Gomez-serrano, C. Valenzuela-calahorro, and J. Pastor-villegas, Characterization of rockrose wood, char and activated carbon, Biomass and Bioenergy, vol.4, issue.5, pp.355-364, 1993.
DOI : 10.1016/0961-9534(93)90052-6

M. M. González-peña, M. Breese, and C. Hill, Hygroscopicity in heat-treated wood: Effect of extractives, International Conference on Environmentally Compatible Forest Products (ICECFOP), pp.22-24, 2004.

M. M. González-peña, S. F. Curling, and M. D. Hale, ) a. On the effect of heat on the chemical composition and dimensions of thermally-modifies wood. Polymer degradation and stability, pp.2184-2193, 2009.

M. M. González-peña and M. D. Hale, Rapid assessment of physical properties and chemical composition of thermally modified wood by mid-infrared spectroscopy. Wood Science and Technology, pp.1-20, 2009.

G. Gunduz, D. Aydemir, and G. Karakas, The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties, Materials & Design, vol.30, issue.10, pp.4391-4395, 2009.
DOI : 10.1016/j.matdes.2009.04.005

J. P. Haluk, Composition chimique du bois dans « Le bois : matériau d'ingénierie », 1994.

M. Hakkou, M. Pétrissans, A. Zoulalian, and P. Gérardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis Polymer Degradation and Stability, pp.1-5, 2005.

M. Hakkou, M. Pétrissans, P. Gérardin, and A. Zoulalian, Investigations of the reasons for fungal durability of heat-treated beech wood, Polymer Degradation and Stability, vol.91, issue.2, pp.393-397, 2006.
DOI : 10.1016/j.polymdegradstab.2005.04.042

S. Hietala, S. Maunu, F. Sundholm, S. Jämsa, and P. Viitaniemi, Structure of Thermally Modified Wood Studied by Liquid State NMR Measurements, Holzforschung, vol.32, issue.5, pp.522-528, 2002.
DOI : 10.1021/j150567a003

C. Hill, Wood Modification, Chemical Thermal and other Processes Wiley serie in Renewable Resources, pp.99-126, 2006.

W. E. Hillis, Distribution, properties and formation of some wood extractives, Wood Science and Technology, vol.15, issue.2, pp.272-289, 1971.
DOI : 10.1042/bj0920516

D. N. Hon and N. Shiraishi, Wood and cellulose chemistry, 1991.

A. L. Horvath, Solubility of Structurally Complicated Materials: I. Wood, Journal of Physical and Chemical Reference Data, vol.35, issue.1, pp.77-92, 2006.
DOI : 10.1063/1.2035708

X. Huang, D. Kocaefe, Y. Kocaefe, Y. Boluk, and C. Krause, Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weathering, Applied Surface Science, vol.264, pp.117-127, 2013.
DOI : 10.1016/j.apsusc.2012.09.137

M. Inoue, M. Norimoto, M. Tanahashi, and R. Rowell, Steam or heat fixation of compressed wood. Wood Fiber Science, pp.224-235, 1993.

S. Jämsä, P. Ahola, and P. Viitaniemi, Long???term natural weathering of coated ThermoWood, Pigment & Resin Technology, vol.29, issue.2, pp.68-74, 2000.
DOI : 10.1108/03699420010317807

S. Jämsä and P. Viitaniemi, Heat treatment of wood ? Better durability without chemicals, Proceedings of special seminar, 2001.

L. S. Jun, D. Kocaefe, and J. Zhang, Mechanical behaviour of Québec wood species heat-treated using ThermoWood process, Holz Roh Werkst, vol.65, pp.255-259, 2007.

P. Jodin, Le bois matériau d'ingénierie. Association pour la recherche sur le bois en Lorraine, 1994.

D. Kamdem, A. Pizzi, and M. Triboulot, Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation. Holz als Roh-und Werkstoff, pp.253-257, 2000.

D. Kamdem, A. Pizzi, and A. Jermannaud, Durability of heat-treated wood. Holz als Roh-und Werkstoff, pp.1-6, 2002.

P. Kasemsiri, S. Hiziroglu, and S. Rimdusit, Characterization of heat treated eastern redcedar (Juniperus virginiana L.), Journal of Materials Processing Technology, vol.212, issue.6, pp.1324-1330, 2012.
DOI : 10.1016/j.jmatprotec.2011.12.019

D. Kocaefe, S. Poncsak, and Y. Boluk, Effect of thermal treatment on the chemical composition and mechanical properties of birch and aspen, Bioresources, vol.3, pp.517-537, 2008.

D. Kocaefe, S. Poncsak, J. J. Tang, and M. Bouazara, Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study, Journal of Materials Science, vol.19, issue.3, pp.681-687, 2010.
DOI : 10.1007/s10853-009-3985-7

R. Kotilanen, Chemical changes in wood during heating at 150-260°C, p.51, 2000.

D. S. Korkut and B. Guller, The effects of heat treatment on physical properties and surface roughness of red-bud maple (Acer trautvetteri Medw.) wood, Bioresource Technology, vol.99, issue.8, pp.99-2846, 2008.
DOI : 10.1016/j.biortech.2007.06.043

D. Korkut, S. Korkut, I. Bekar, M. Budakç?, T. Dilik et al., The Effects of Heat Treatment on the Physical Properties and Surface Roughness of Turkish Hazel (Corylus colurna L.) Wood, International Journal of Molecular Sciences, vol.41, issue.9, pp.1772-1783, 2008.
DOI : 10.1007/s00226-006-0099-0

S. Korkut and D. Kocaefe, Effect of heat treatment on wood properties. Duzce Univ, J. Forest, vol.5, issue.2, pp.11-34, 2009.

S. Korkut, D. S. Korkut, D. Kocaefe, D. Elustondo, A. Bajraktari et al., Effect of thermal modification on the properties of narrow-leaved ash and chestnut, Industrial Crops and Products, vol.35, issue.1, pp.287-294, 2012.
DOI : 10.1016/j.indcrop.2011.07.016

S. Korkut, Performance of three thermally treated tropical wood species commonly used in Turkey, Industrial Crops and Products, vol.36, issue.1, pp.355-362, 2012.
DOI : 10.1016/j.indcrop.2011.10.004

R. Kotilanen, Chemical changes in wood during heating at 150-260°C, p.51, 2000.

Y. Kubojima, T. Okano, and M. Ohta, Vibrational properties of Sitka spruce heat-treated in nitrogen gas, Journal of Wood Science, vol.42, issue.1, pp.73-77, 1998.
DOI : 10.1080/14786442108636264

Y. Kubojima, T. Okano, and M. Ohta, Vibrational properties of heat-treated green wood, Journal of Wood Science, vol.11, issue.1, pp.63-67, 2000.
DOI : 10.1007/BF00521878

Y. Kubojima, T. Okano, and M. Ohta, Bending strength and toughness of heat-treated wood, Journal of Wood Science, vol.26, issue.1, pp.8-15, 2000.
DOI : 10.1007/978-3-642-87928-9

A. Leclercq, Relations entre la structure anatomique du bois de hêtre (Fagus sylvatica L.) et ses propriétés physiques et mécaniques, Bulletin de Recherches Agronomiques de Gembloux, vol.16, issue.1, pp.3-26, 1981.

S. Lekounougou, M. Pétrissans, J. P. Jacquot, E. Gelhaye, and P. Gérardin, Effect of heat treatment on extracellular enzymatic activities involved in beech wood degradation by Trametes versicolor. Wood Science and Technology, pp.331-341, 2009.

J. R. Loferski, Technologies for wood preservation in historic preservation. Archives and Museum Informatics, pp.273-290, 2001.

M. López, O. Huerta-pujol, F. X. Martínez-farré, and M. Soliva, Approaching compost stability from Klas on lignin modified method: Chemical Stability Degree for OM and N quality assessment. Resources, Conservation and Recycling, pp.171-181, 2010.

D. Mayes and O. Oksanen, Thermowood Handbook, 2002.

F. Mburu, S. Dumarçay, J. Bocquet, M. Pétrissans, and P. Et-gérardin, Effect of chemical modifications caused by heat treatment on mechanical properties of Grevillea robusta wood, Polymer Degradation and Stability, vol.93, issue.2, pp.401-405, 2008.
DOI : 10.1016/j.polymdegradstab.2007.11.017

A. Mcdonald, M. Fernandez, and B. Kreber, Chemical and UV-VIS spectroscopic study on kiln brown stain formation in Radiata pine, 9th International Symposium of Wood and Pulping Chemistry, pp.1-5, 1997.

M. Mehrotra, P. Singh, and H. Kandpal, Near infrared spectroscopic investigation of the thermal degradation of wood, Thermochimica Acta, vol.507, issue.508, pp.507-508, 2010.
DOI : 10.1016/j.tca.2010.05.001

S. Metsä-kortelainen, T. Antikainen, and P. Vittaniemi, Wasseraufnahme von Splint- und Kernholz von Kiefer und Fichte nach einer W??rmebehandlung bei 170?????C, 190?????C, 210?????C und 230?????C, Holz als Roh-und Werkstoff, pp.192-197, 2006.
DOI : 10.1007/s00107-005-0063-y

H. Militz, Heat treatment of wood: European Processes and their background, International Research Group Wood Pre, Section 4-Processes, pp.2-40241, 2002.

K. Mitsui, H. Takada, M. Sugiyama, and R. Hasegawa, Changes in the properties of lightirradiated wood with heat treatment: Part 1 Effect of treatment conditions on the change in color, Holzforschung, vol.55, pp.601-605, 2001.

K. Mitsui, A. Murata, M. Kohara, and S. Tsuchikawa, Colour modification of wood by lightirradiation and heat treatment, Abstracts of the First European Conference on Wood Modification, 2003.

K. Mitsui, A. Murata, M. Kohora, and S. Tsuchikawa, Color modification of wood by light irradiation and heat treatment, Proceedings of the first European conference on wood modification, pp.43-52, 2003.

K. Mitsui, A. Murata, and L. Tolvaj, Changes in the properties of lightirradiated wood with heat treatment: Part 3. Monitoring by DRIFT spectroscopy. Holz als Roh-und Werkstoff, pp.164-168, 2004.

S. Mouras, P. Girard, P. Rousset, P. Permadi, D. Dirol et al., Propri???t???s physiques de bois peu durables soumis ??? un traitement de pyrolyse m???nag???e, Annals of Forest Science, vol.59, issue.3, pp.317-326, 2002.
DOI : 10.1051/forest:2002027

URL : http://www.afs-journal.org/articles/forest/pdf/2002/03/08.pdf

T. Nakano and J. Miyazaki, Surface Fractal Dimensionality and Hygroscopicity for Heated Wood, Holzforschung, vol.48, issue.3, pp.289-294, 2003.
DOI : 10.1021/ac60122a009

N. Inari, G. Pétrissans, M. Lambert, J. Ehrhardt, J. J. Gérardin et al., XPS characterization of wood chemical composition after heat treatment. Surface and Interface Analysis, pp.1336-1342, 2006.

N. Inari, G. Mounguengui, S. Dumarcxay, S. Pétrissans, M. Gérardin et al., Evidence of char formation during heat treatment by pyrolysis. Polymer Degradation and Stabilisation, pp.997-1002, 2007.

N. Inari, G. Pétrissans, M. Pétrissans, A. Gérardin, and P. , Elemental composition of wood as a potential marker to evaluate heat treatment intensity, Polymer Degradation and Stability, vol.94, issue.3, pp.365-368, 2009.
DOI : 10.1016/j.polymdegradstab.2008.12.003

D. D. Nicholas, A. Kadir, A. D. Williams, and A. F. Preston, Water repellency of wood treated with alkylammonium compounds and chromated copper arsenate, International Research Group on Wood Preservation. Doc. No. IRG, pp.0-30231, 2000.

M. Nuopponen, T. Vuorinen, S. Jamsa, and P. Viitaniemi, Thermal Modifications in Softwood Studied by FT???IR and UV Resonance Raman Spectroscopies, Journal of Wood Chemistry and Technology, vol.50, issue.1, pp.13-26, 2004.
DOI : 10.1366/000370203321165214

S. Ozcan, A. Ozcifci, S. Hiziroglu, and H. Toker, Effects of heat treatment and surface roughness on bonding strength, Construction and Building Materials, vol.33, pp.7-13, 2012.
DOI : 10.1016/j.conbuildmat.2012.01.008

J. Peters, K. Fischer, and S. Fischer, Characterization of emissions from thermally modified wood and their reduction by chemical treatment, Bioresources, vol.3, issue.2, pp.491-502, 2008.

J. Peters, A. Pfriem, M. Horbens, S. Fischer, and A. Wagenführ, Emissions from thermally modiefied beech wood, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts. Wood material science and engineering, pp.61-66, 2009.

M. Pétrissans, P. Gérardin, I. Bakali, and M. Serraj, Wettability of Heat-Treated Wood, Holzforschung, vol.55, issue.1, pp.301-307, 2003.
DOI : 10.1098/rstl.1805.0005

B. Pollet, J. Weiland, R. Guyonnet, and C. Et-lapierre, Rétification du pin maritime : structure des lignines et propriétés du bois, pp.155-165, 2001.

S. Poncsak, D. Kocaefe, M. Bouazara, and A. Pichette, Effect of high temperature treatment on the mechanical properties of birch (Betula papyrifera), Wood Science and Technology, vol.15, issue.88, pp.647-668, 2006.
DOI : 10.1007/s00226-006-0082-9

S. Poncsak, D. Kocaefe, and R. Younsi, Verbesserung der W??rmebehandlung von Jack Pine Holz (Pinus banksiana) mit dem ThermoWood Verfahren, European Journal of Wood and Wood Products, vol.63, issue.7, pp.281-286, 2010.
DOI : 10.1007/s00107-004-0532-8

T. Priadi and S. Hiziroglu, Characterization of heat treated wood species, Materials & Design, vol.49, pp.575-582, 2013.
DOI : 10.1016/j.matdes.2012.12.067

M. V. Ramiah, Thermogravimetric and differential thermal analysis of cellulose, hemicellulose, and lignin, Journal of Applied Polymer Science, vol.14, issue.5, pp.1323-1337, 1970.
DOI : 10.1002/app.1970.070140518

A. Rapp, Review on heat treatments of wood, COST ACTION E22-Environmental optimisation of wood protection, Proceedings of Special Seminar, 2001.

A. O. Rapp and M. Sailer, Heat treatment in Germany Proceedings of Seminar " Production and development of heat treated wood in Europe, 2000.

H. P. Ruyter, European patent Appl, 1989.

M. Schwanninger, B. Hinterstoisser, N. Gierlinger, R. Wimmer, and J. Hanger, Application of Fourier transform near infrared spectroscopy (FT-NIR) to thermally modified wood. Holz als Roh-und Werkstoff, pp.62-483, 2004.

N. Todorovi?, Z. Popovi?, G. Mili?, and R. Popadi?, Estimation of heat-treated beechwood properties by color change, BioResources, vol.7, issue.1, pp.799-815, 2012.

M. Venalainen, M. Anni, H. P. Saranpa, P. Kainulainen, M. Tiitta et al., The concentration of phenolics in brown-rot decay resistant and susceptible Scots pine heartwood. Wood Sciences and Technology, pp.109-118, 2004.

M. Vernois, Heat treatment of wood in France-State of the art. Centre Technique du Bois et de l'Ameublement, 2000.

P. Viitaniemi, S. Jämsä, and H. Viitanen, Method for improving biodegradation resistance and dimensional stability of cellulosic products, 1997.

P. M. Visakh and S. Thomas, Preparation of Bionanomaterials and their Polymer Nanocomposites from Waste and Biomass. Waste and Biomass Valorization, pp.21-134, 2010.

B. Vital, R. Lucia, R. Della, and R. Euclides, Effect of heating on some properties of Eucalyptus saligna wood, Revista-Árvore, vol.7, issue.2, pp.136-146, 1983.

J. J. Weiland and R. Guyonnet, Physicochemical study of a thermal treatment of wood, pp.195-202, 2001.

J. J. Weiland and R. Guyonnet, Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Roh-und Werkstoff, pp.216-220, 2003.
URL : https://hal.archives-ouvertes.fr/emse-00449295

C. Welzbacher and O. Rapp, Comparison of thermally modified wood originating from four industrial scale processes-durability. International Research Group Wood Pre, pp.2-40229, 2002.

C. Welzbacher, C. Brischke, and A. Rapp, Influence of treatment temperature and duration on selected biological, mechanical, physical and optical properties of thermally modified timber, Wood Material Science and Engineering, vol.48, issue.2, pp.66-76, 2007.
DOI : 10.1007/s00107-005-0033-4

H. Wikberg and S. Maunu, Characterisation of thermally modified hard-and softwoods by 13C CPMAS NMR. Carbohydrate Polymers, pp.461-466, 2004.

W. Willems and H. Militz, From chemical process monitoring to direct control of thermally modified wood properties. COST Action FP0904, 3rd Conference: "Evaluation, processing and prediction of THM treated wood behaviour by experimental and numberical methods, 2013.

E. Windeisen, R. Fuchs, and G. Wegener, Chemical changes during the production of beech and ash thermowood, Proceedings of 9th European Workshop on Lignocellulosics and Pulp, pp.579-582, 2006.

E. Windeisen, C. Strobel, and G. Wegener, Chemical changes during the production of thermotreated beech wood. Wood Science and Technology, pp.523-536, 2007.

P. Woessner, Influence d'un traitement thermique sur la résistance mécanique du bois de pin, Thèse de doctorat, 2008.

Y. Yamada, T. Isoki, and S. Katsumi, Anticorrosive durable wood preservatives free from arsenic, chromine and organic solvents, JP, vol.10235612, p.2, 1998.

S. Yildiz, Effects of heat treatment on water repellence and anti-swelling efficiency of beech wood, International Research Group Wood Preservation, Document No. IRG, pp.2-40223, 2002.

S. Yildiz, D. Gezer, and U. Yildiz, Mechanical and chemical behavior of spruce wood modified by heat, Building and Environment, vol.41, issue.12, pp.1762-1766, 2006.
DOI : 10.1016/j.buildenv.2005.07.017

A. Zaman, R. Alen, and R. Kotilainen, Heat behavior of Pinus sylvestris and Betula pendula at 200-230°C, Wood and Fiber Science, vol.32, issue.2, pp.138-143, 1984.

A. Zaman, R. Alen, and R. Kotilainen, Heat behavior of Pinus sylvestris and Betula pendula at 200- 230 °C. Wood Fiber Science, pp.138-143, 2000.

J. Zawadzki and M. Wisniewski, 13C NMR study of cellulose thermal treatment, Journal of Analytical and Applied Pyrolysis, vol.62, issue.1, pp.111-121, 2002.
DOI : 10.1016/S0165-2370(00)00217-5