.. Paramétrage-théorique-de-l-'outil, Définition de l'arête de coupe rectiligne et des angles de coupe associés, p.84

L. Parametres, O. En, and .. Avec-systeme-bta, 19 3.1. Caractérisation géométrique d'un outil

S. Bahi, Modelisation hybride du frottement local à l'interface outil-copeau en usinage des alliages métalliques, Thèse de l'Ecole Nationale Supérieure d'Arts et Métiers, 2007.

P. Darnis, O. Cahuc, and Y. Couétard, Energy balance with mechanical actions measurement during a turning process, CIRP. 8th CIRP Workshop on Modeling of Machining Operations, pp.183-190, 2000.

E. Franken, 33. SANDVIK, Deep hole drilling Compagny information leaflet Technique de taraudage -Technique de serrage : informations technique Informations technique 140. 35. FETTE, Outils de taillage : fraises méres, fraises module et fraises de forme. 36. C. Barlier, MEMOTECH Plus : Industrialisation & mécanique. 2010. 37. SANDVIK, Deep hole drilling. Product catalogue and application guide, SANDVIK, Hole making application guide. Product catalogue and application guide 38. S. Laporte, Modélisation des phénomènes physiques impliqués dans la coupe : Application au perçage des matériaux monolithiques Thèse de doctorat de mécanique, pp.98-105, 1975.

J. Frazao, On the design and development of a new BTA Tool to increase productivity and workpiece accuracy in deep hole machining. The International Journal of Advanced Manufacturing Technology, pp.3-23, 1986.

B. J. Griffiths, An Investigation into the Role of the Burnishing Pads in the Deep Hole Drilling Process, 1982.

J. Barry and G. Byrne, The Mechanisms of Chip Formation in Machining Hardened Steels, Journal of Manufacturing Science and Engineering, vol.22, issue.3, pp.528-535, 2002.
DOI : 10.1016/0020-7403(80)90070-3

R. Komanduri and Z. B. , A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology, Tribology International, vol.34, issue.10, pp.34-653, 2001.
DOI : 10.1016/S0301-679X(01)00068-8

A. E. Bayoumi and J. Q. Xie, Some metallurgical aspects of chip formation in cutting Ti-6wt.%Al-4wt.%V alloy, Materials Science and Engineering: A, vol.190, issue.1-2, pp.190-173, 1995.
DOI : 10.1016/0921-5093(94)09595-N

J. Barry, G. Byrne, and D. Lennon, Observations on chip formation and acoustic emission in machining Ti???6Al???4V alloy, International Journal of Machine Tools and Manufacture, vol.41, issue.7, pp.41-1055, 2001.
DOI : 10.1016/S0890-6955(00)00096-1

M. C. Shaw and A. Vyas, The Mechanism of Chip Formation with Hard Turning Steel, CIRP Annals, vol.47, issue.1, pp.77-82, 1998.
DOI : 10.1016/S0007-8506(07)62789-9

X. Zhang, Predicting the Effects of Cutting Parameters and Tool Geometry on Hard Turning Process Using Finite Element Method, Journal of Manufacturing Science and Engineering, vol.3, issue.4, p.133, 2011.
DOI : 10.1115/1.1430678

S. Kouadri, Quantification of the chip segmentation in metal machining: Application to machining the aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co, International Journal of Machine Tools and Manufacture, vol.64, pp.102-113, 2013.
DOI : 10.1016/j.ijmachtools.2012.08.006

URL : https://hal.archives-ouvertes.fr/hal-01431057

P. Talonnement and ». , 67 1.1. Plans conventionnels, caractéristiques de « l'outil en main 68 1.2. Plans effectifs, caractéristiques de « l'outil en travail, p.79

.. Paramétrage-théorique-de-l-'outil, 83 2.1.3. Définition de l'arête de coupe rectiligne et des angles de coupe associés, 82 2.1.2. Définition des surfaces de, p.88

D. Analyse-préliminaire, 141 3.2.1. Proposition d'une nouvelle démarche analytique de l'évolution de la température de l'outil en cours d'usinage, p.149

R. Bibliographiques-du and C. , Etude de la compétition déchirure ductile / rupture fragile : application à la tenue mécanique des tubes en acier C-Mn et de leurs joints soudes, 151 15. V. Le Corre, 2006.

M. Hajjaj, Propagation dynamique et arrêt de fissure de clivage dans un acier bainitique. PPt -Soutenance de Thèse, 2006. 17. B. Vereecke, Une analyse probabiliste du comportement d'une famille d'aciers pour cuve de REP en cas d'accident grave, Thèse de doctorat de l'université Paris VI, 2004.

J. P. Cordebois, D. Ovono, and . Ovono, Fabrication par usinage Industrie et technologies, série matériaux Approche locale de la propagation et de l'arrêt de fissure fragile. 18 ème Congrès Français de Mécanique The investigation on the machining process of BTA deep hole drilling, Journal of Materials Processing Technology, pp.222-227, 2000.

R. Komanduri and R. H. Brown, On the Mechanics of Chip Segmentation In Machining, Journal of Engineering for Industry, vol.103, issue.1, pp.33-51, 1981.
DOI : 10.1115/1.3184458

J. D. Velasquez, Etude des copeaux et de l'intégrité de surface en usinage à grande vitesse de l'alliage de titane TA6V, Thèse de l'universite Paul Verlaine de Metz, 2007.

J. Barry, G. Byrne, and D. Lennon, Observations on chip formation and acoustic emission in machining Ti???6Al???4V alloy, International Journal of Machine Tools and Manufacture, vol.41, issue.7, pp.41-1055, 2001.
DOI : 10.1016/S0890-6955(00)00096-1

J. Barry and G. Byrne, The Mechanisms of Chip Formation in Machining Hardened Steels, Journal of Manufacturing Science and Engineering, vol.22, issue.3, pp.528-535, 2002.
DOI : 10.1016/0020-7403(80)90070-3

S. Kouadri, Quantification of the chip segmentation in metal machining: Application to machining the aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co, International Journal of Machine Tools and Manufacture, vol.64, pp.102-113, 2013.
DOI : 10.1016/j.ijmachtools.2012.08.006

URL : https://hal.archives-ouvertes.fr/hal-01431057

M. Cotterell and G. Byrne, Characterisation of chip formation during orthogonal cutting of titanium alloy Ti???6Al???4V, CIRP Journal of Manufacturing Science and Technology, vol.1, issue.2, pp.81-85, 2008.
DOI : 10.1016/j.cirpj.2008.09.017

F. Kea, J. Nib, and D. A. Stephenson, Chip thickening in deep-hole drilling, International Journal of Machine Tools and Manufacture, vol.46, issue.12-13, pp.1500-1507, 2005.
DOI : 10.1016/j.ijmachtools.2005.09.022

F. Kea, J. Nib, and D. A. Stephenson, Continuous chip formation in drilling, International Journal of Machine Tools and Manufacture, vol.45, issue.15, pp.45-1652, 2005.
DOI : 10.1016/j.ijmachtools.2005.03.011

E. Merchant, Basic mechanics of the metal cutting process, J. App. Mech. Trans. ASME, vol.66, p.168, 1944.

V. P. Astakhov and S. Shvets, The assessment of plastic deformation in metal cutting, Journal of Materials Processing Technology, vol.146, issue.2, pp.193-202, 2003.
DOI : 10.1016/j.jmatprotec.2003.10.015

S. Atlati, Analysis of a new Segmentation Intensity Ratio ???SIR??? to characterize the chip segmentation process in machining ductile metals, International Journal of Machine Tools and Manufacture, vol.51, issue.9, pp.51-687, 2011.
DOI : 10.1016/j.ijmachtools.2011.05.007

C. Barlier, Industrialisation & mécanique. 2010. 33. KISTLER, Mesure des Efforts de Coupe : mesure de précision pour l'optimisation des procédés de coupe, 2005.

C. Barlier, Mesure en continu de l'usure des outils de coupe par micro-sondes incorporées, Thèse de l'Ecole Nationale Superieure d'Arts et Metiers, 1991.

J. Thil, A study of the BTA deep drilling process through a quantitative and qualitative analysis of the chip formation process, Key Engineering Materials, pp.554-557, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01431199

J. L. Battaglia, Mod??lisation du comportement thermique d'un outil de fraisage : approche par identification de syst??me non entier, Comptes Rendus M??canique, vol.330, issue.12, pp.857-864, 2002.
DOI : 10.1016/S1631-0721(02)01542-5

T. Kagnaya, Contribution à l'identification des mécanismes d'usure d'un WC-6%Co en usinage et par une approche tribologique et thermique, 2009.

.. Modèle-analytique-thermomécanique-de-la-coupe-orthogonale, 164 1.2.1. Définition du système d'efforts, p.165

A. Du and M. , 175 2.1. Validation du modèle de coupe orthogonale n°2 : analyse de l'influence de la géométrie des parties actives sur l'évolution des efforts de coupe, p.181

L. Figure and I. , angle d'attaque sur les efforts de coupe. L'effort d'avance ainsi que le couple semblent peu affectés par la valeur de l'angle d'attaque. En revanche, l'effort radial augmente très distinctement lorsque la valeur de l'angle d'attaque augmente. Les efforts de coupe radiaux jouent un rôle très important en forage car ils conditionnent en partie la rectitude de l'alésage. En effet, s'ils sont trop importants et/ou l'outil est mal équilibré

I. Figure, Influence de l'angle d'attaque ( ? ) sur l'évolution des efforts de coupe agissant sur l'outil BTA Ø19,28mm (ref. BTU-002FBA19,28 UX-2D TAA) pour Vc = 90m.min -1 et f = 0,15mm.tr -1 . (a) Couple résultant ( Mc ). (b) Effort d'avance résultant ( Fa )

Z. Bing-hou and R. Komanduri, Modelling of thermomechanical shear instability in machining, Int. J. Mech. Sci, vol.39, pp.1273-1314, 1997.

Y. Huang and S. Y. Liang, Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect, Journal of Manufacturing Science and Engineering, vol.120, issue.2, p.127, 2005.
DOI : 10.1115/1.3669887

J. Wang and P. Mathew, Development of a general tool model for turning operations based on a variable flow stress theory, International Journal of Machine Tools and Manufacture, vol.35, issue.1, pp.35-71, 1995.
DOI : 10.1016/0890-6955(94)E0004-3

J. Manjunathaiah and W. J. Endres, A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool, Journal of Manufacturing Science and Engineering, vol.1, issue.3, pp.384-390, 2000.
DOI : 10.1080/10940349708945638

J. A. Yang, V. Janagathan, and R. Du, A new dynamic model for drilling and reaming processes, International Journal of Machine Tools and Manufacture, vol.42, issue.2, pp.299-311, 2002.
DOI : 10.1016/S0890-6955(01)00102-X

E. Usui and A. Hirota, Analytical prediction of three dimensional cutting process, Journal of engineering for industry, p.100, 1978.

D. Germain, A force model for superfinish turning of pure copper with rounded edge tools at low feed rate, Eighth International Conference on High Speed Machining, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00906248

D. Dudzinski and A. Molinari, A modelling of cutting for viscoplastic materials, International Journal of Mechanical Sciences, vol.39, issue.4, pp.369-389, 1997.
DOI : 10.1016/S0020-7403(96)00043-4

C. Shin and C. , A force model for nose radius worn tools with a chamfered main cutting edge. Machine tools and manufacture, pp.1467-1498, 1998.

A. Moufki, Thermomechanical modelling of oblique cutting and experimental validation A new thermomechanical model of cutting applied to turning operations. Part I. Theory. International Journal of Machine Tools & Manufacture Modelling machining processes with a view to their optimization. 1988. 13. Y. Altintas, Manufacturing Automation, Metal Cutting Mechanics, Force Prediction Models and CAD/CAM Software for Helical Tooth Milling Processes. Part I : Basic Approach and Cutting Analyses, pp.31-1991, 1993.

E. J. Armarego and N. P. Deshpande, Force Prediction Models and CAD/CAM Software for Helical Tooth Milling Processes. Part II: Peripheral Milling Operations, International Journal of Production Research, pp.31-2319, 1993.

S. Bissey, Développement d'un modèle d'efforts de coupe applicable à des familles d'outils : cas du fraisage des aciers traites thermiquement, Thèse de l'Ecole Nationale Superieure d'Arts et Métiers, 2005.

M. Jrad, Modélisation du perçage à grande vitesse : Approches analytique, numérique et expérimentale, Thèse de l'université de Metz, 2007.

M. Fontaine, Predictive force model for ball-end milling and experimental validation with a wavelike form machining test, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.46-367, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.011

URL : https://hal.archives-ouvertes.fr/hal-00178459

M. Fontaine, Modelling of cutting forces in ball-end milling with tool?surface inclination: Part I: Predictive force model and experimental validation, Journal of Materials Processing Technology, pp.189-73, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00261027

M. Fontaine, Modelling of cutting forces in ball-end milling with tool?surface inclination: Part II. Influence of cutting conditions, run-out, ploughing and inclination angle, Journal of Materials Processing Technology, pp.189-85, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00261032

A. Molinari and D. Dudzinski, Simulation et modélisation de la coupe Rapport de contrat. 1993. 22. A. Moufki, A. Molinari, and D. Dudzinski, Modelling of orthogonal cutting with a temperature dependent friction law, J. Mech. Phys. Solids, pp.46-2103, 1998.

M. C. Shaw and S. Atlati, Metal cutting Principles Oxford science publications Analysis of a new Segmentation Intensity Ratio ''SIR'' to characterize the chip segmentation process in machining ductile metals, International Journal of Machine Tools & Manufacture, issue.24, pp.51-687, 1984.

S. Kouadri, Quantification of the chip segmentation in metal machining: Application to machining the aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co, International Journal of Machine Tools and Manufacture, vol.64, pp.102-113, 2013.
DOI : 10.1016/j.ijmachtools.2012.08.006

URL : https://hal.archives-ouvertes.fr/hal-01431057