M. Abbasi and M. Houshmand, Production planning and performance optimization of reconfigurable manufacturing systems using genetic algorithm, The International Journal of Advanced Manufacturing Technology, vol.41, issue.10, pp.373-392, 2010.
DOI : 10.1080/0020754031000077266

L. Alting and H. Zhang, Computer Aided Process Planning: the state-of-the-art survey, International Journal of Production Research, vol.36, issue.1, pp.553-585, 1989.
DOI : 10.1016/S0007-8506(07)61430-9

A. M. Ashraf, Optimal configuration selection for seconfigurable manufacturing systems, Thesis, 2006.

A. Azab and H. A. Elmaraghy, Mathematical Modeling for Reconfigurable Process Planning, CIRP Annals, vol.56, issue.1, pp.467-472, 2007.
DOI : 10.1016/j.cirp.2007.05.112

S. Bandyopadhyay, A Simulated Annealing-Based Multiobjective Optimization Algorithm: AMOSA, IEEE Transactions on Evolutionary Computation, vol.12, issue.3, pp.269-283, 2008.
DOI : 10.1109/TEVC.2007.900837

P. A. Borisovsky, X. Delorme, and A. Dolgui, Genetic algorithm for balancing reconfigurable machining lines, Computers & Industrial Engineering, vol.66, issue.3, pp.541-547, 2013.
DOI : 10.1016/j.cie.2012.12.009

URL : https://hal.archives-ouvertes.fr/emse-00769634

A. I. Bratcu, A. Dolgui, and S. Belmokhtar, Reconfigurable Transfer Lines Cost Optimization - A Linear Programming Approach, 2005 IEEE Conference on Emerging Technologies and Factory Automation, pp.625-632
DOI : 10.1109/ETFA.2005.1612581

URL : https://hal.archives-ouvertes.fr/hal-00387693

T. Chang and R. A. Wysk, An introduction to automated process planning, 1985.

A. Chaube, L. Benyoucef, and M. K. Tiwari, An adapted NSGA-2 algorithm based dynamic process plan generation for a reconfigurable manufacturing system, Journal of Intelligent Manufacturing, vol.56, issue.2, pp.1141-1155, 2012.
DOI : 10.1007/3-540-29397-3_6

URL : https://hal.archives-ouvertes.fr/inria-00601246

Q. Chen and B. Khoshnevis, Scheduling with flexible process plans. Production Planning & Control : The Management of Operations, pp.333-343, 1993.

G. David, Genetic algorithms in search, optimization, and machine learning, 1989.

K. Deb, A fast and elitist multiobjective genetic algorithm: NSGA-II, IEEE Transactions on Evolutionary Computation, vol.6, issue.2, pp.182-197, 2002.
DOI : 10.1109/4235.996017

K. Deb, An introduction to genetic algorithms, Sadhana, vol.2, issue.4-5, pp.293-315, 1999.
DOI : 10.1016/B978-0-08-094832-4.50009-X

K. Deb, Multi-objective optimization using evolutionary algorithms, 2001.

Y. Donoso and R. Fabregat, Multi-objective optimization in computer networks using metaheuristics, 2007.

J. Dou, X. Dai, and Z. Meng, A GA-based approach for optimizing single-part flow-line configurations of RMS, Journal of Intelligent Manufacturing, vol.46, issue.21, pp.301-317, 2011.
DOI : 10.1080/00207540701261626

H. A. Elmaraghy, Reconfigurable Process Plans For Responsive Manufacturing Systems, Digital Enterprise Technology, pp.35-44, 2007.
DOI : 10.1007/978-0-387-49864-5_4

M. Essafi, X. Delorme, and A. Dolgui, A reactive GRASP and Path Relinking for balancing reconfigurable transfer lines, International Journal of Production Research, vol.6, issue.4, pp.5213-5238, 2012.
DOI : 10.1023/A:1008067422364

URL : https://hal.archives-ouvertes.fr/emse-00693913

R. Galan, A systematic approach for product families formation in Reconfigurable Manufacturing Systems, Robotics and Computer-Integrated Manufacturing, vol.23, issue.5, pp.489-502, 2007.
DOI : 10.1016/j.rcim.2006.06.001

K. K. Goyal, P. K. Jain, and M. Jain, Optimal configuration selection for reconfigurable manufacturing system using NSGA II and TOPSIS, International Journal of Production Research, vol.39, issue.6, pp.4175-4191, 2012.
DOI : 10.1016/j.tourman.2010.02.007

X. Guan, A revised electromagnetism-like mechanism for layout design of reconfigurable manufacturing system, Computers & Industrial Engineering, vol.63, issue.1, pp.98-108, 2012.
DOI : 10.1016/j.cie.2012.01.016

K. Gumasta, Developing a reconfigurability index using multi-attribute utility theory, International Journal of Production Research, vol.49, issue.6, pp.1669-1683, 2011.
DOI : 10.1080/00207540410001699372

URL : https://hal.archives-ouvertes.fr/inria-00600898

Y. W. Guo, Applications of particle swarm optimisation in integrated process planning and scheduling, Robotics and Computer-Integrated Manufacturing, vol.25, issue.2, pp.280-288, 2009.
DOI : 10.1016/j.rcim.2007.12.002

R. L. Haupt and S. E. Haupt, Practical genetic algorithms, 2004.
DOI : 10.1002/0471671746

U. Heisel and M. Meitzner, Progress in reconfigurable manufacturing systems Reconfigurable Manufacturing Systems and Transformable Factories, pp.47-62, 2006.

J. H. Holland, Adaptation in natural and artificial systems: An introductory analysis with applications to biology, control, and artificial intelligence, 1975.

C. L. Hwang and A. S. Masud, Multiple objective decision making?methods and applications: A state-of-the-art survey, Lectures Notes in Economics and Mathematical Systems, vol.164, 1979.
DOI : 10.1007/978-3-642-45511-7

A. Jain, P. K. Jain, and I. P. Singh, An integrated scheme for process planning and scheduling in FMS, The International Journal of Advanced Manufacturing Technology, vol.15, issue.7, pp.11-121111, 2006.
DOI : 10.1007/s00170-005-0142-6

D. Jones, S. Mirrazavi, and M. Tamiz, Multi-objective meta-heuristics: An overview of the current state-of-the-art, European Journal of Operational Research, vol.137, issue.1, pp.1-9, 2002.
DOI : 10.1016/S0377-2217(01)00123-0

B. Khoshnevis and Q. M. Chen, Integration of process planning and scheduling functions, Journal of Intelligent Manufacturing, vol.8, issue.3, pp.165-175, 1991.
DOI : 10.1007/BF01471363

S. Kirkpatrick, C. D. Gelatt, and M. P. Vecchi, Optimization by simulated annealing, Science, issue.4598, pp.220671-680, 1983.

Y. Koren, General RMS characteristics. comparison with dedicated and flexible systems Reconfigurable Manufacturing systems and Transformable Factories, pp.7-45, 2006.

Y. Koren, Real-Time Open Control Architectures and System Performance, CIRP Annals, vol.45, issue.1, pp.377-380, 1996.
DOI : 10.1016/S0007-8506(07)63084-4

Y. Koren, Reconfigurable Manufacturing Systems, CIRP Annals, vol.48, issue.2, pp.527-540, 1999.
DOI : 10.1016/S0007-8506(07)63232-6

Y. Koren, The global manufacturing revolution, 2010.
DOI : 10.1002/9780470618813

Y. Koren and M. Shpitalni, Design of reconfigurable manufacturing systems, Journal of Manufacturing Systems, vol.29, issue.4, pp.130-141, 2010.
DOI : 10.1016/j.jmsy.2011.01.001

T. Lacksonen, Empirical comparison of search algorithms for discrete event simulation, Computers & Industrial Engineering, vol.40, issue.1-2, pp.133-148, 2001.
DOI : 10.1016/S0360-8352(01)00013-4

R. G. Landers, B. Min, and Y. Koren, Reconfigurable Machine Tools, CIRP Annals, vol.50, issue.1, pp.269-274, 2001.
DOI : 10.1016/S0007-8506(07)62120-9

J. Li, X. Dai, and Z. Meng, Automatic Reconfiguration of Petri Net Controllers for Reconfigurable Manufacturing Systems With an Improved Net Rewriting System-Based Approach, IEEE Transactions on Automation Science and Engineering, vol.6, issue.1, pp.156-167, 2009.
DOI : 10.1109/TASE.2008.2006857

X. Li, L. Gao, G. Zhang, C. Zhang, and X. Shao, A Genetic Algorithm for Integration of Process Planning and Scheduling Problem, Intelligent Robotics and Applications. 5315, pp.495-502, 2008.
DOI : 10.1007/978-3-540-88518-4_53

X. Li, Mathematical modeling and evolutionary algorithm-based approach for integrated process planning and scheduling, Computers & Operations Research, vol.37, issue.4, pp.656-667, 2010.
DOI : 10.1016/j.cor.2009.06.008

X. Li, L. Gao, and W. Li, Application of game theory based hybrid algorithm for multi-objective integrated process planning and scheduling, Expert Systems with Applications, vol.39, issue.1, pp.288-297, 2012.
DOI : 10.1016/j.eswa.2011.07.019

K. Lian, Integrated process planning and scheduling using an imperialist competitive algorithm, International Journal of Production Research, vol.44, issue.18, pp.4326-4343, 2012.
DOI : 10.1016/j.cor.2006.02.024

H. B. Marri, A. Gunasekaran, and R. J. Grieve, Computer-aided process planning: A state of art, The International Journal of Advanced Manufacturing Technology, vol.9, issue.5, pp.261-268, 1998.
DOI : 10.1007/BF01199881

M. G. Mehrabi, Trends and perspectives in flexible and reconfigurable manufacturing systems, Journal of Intelligent Manufacturing, vol.13, issue.2, pp.135-146, 2002.
DOI : 10.1023/A:1014536330551

G. Mohammadi, A. Karampourhaghghi, and F. Samaei, A multi-objective optimisation model to integrating flexible process planning and scheduling based on hybrid multi-objective simulated annealing, International Journal of Production Research, vol.26, issue.6, pp.5063-5076, 2012.
DOI : 10.1007/s00170-003-2042-y

P. Mohapatra, L. Benyoucef, and M. K. Tiwari, Realising process planning and scheduling integration through adaptive setup planning, International Journal of Production Research, vol.39, issue.14, pp.2301-2323, 2013.
DOI : 10.1080/00207540110056171

F. Musharavati, A Metaheuristic Approach to Manufacturing Process Planning in Reconfigurable Manufacturing Systems, Jurnal Teknologi, vol.48, issue.1, pp.55-70, 2008.
DOI : 10.11113/jt.v48.219

F. Musharavati and A. S. Hamouda, Enhanced simulated-annealing-based algorithms and their applications to process planning in reconfigurable manufacturing systems, Advances in Engineering Software, vol.45, issue.1, pp.80-90, 2012.
DOI : 10.1016/j.advengsoft.2011.09.017

M. Nourelfath, D. Ait-kadi, and I. Soro, Optimal design of reconfigurable manufacturing systems, IEEE International Conference on Systems, Man and Cybernetics, 2002.
DOI : 10.1109/ICSMC.2002.1176086

A. O. Oke, K. Abou-el-hossein, and N. J. Theron, Process planning for reconfigurable manufacturing system for mould / die making, the 4th Robotics and Mechatronics Conference of South Africa, 2011.

R. K. Phanden, A. Jain, and R. Verma, An approach for integration of process planning and scheduling, International Journal of Computer Integrated Manufacturing, vol.17, issue.1, pp.284-302, 2013.
DOI : 10.1016/S0007-8506(07)62357-9

B. Roy, Classement et choix en présence de points de vue multiples. Revue française d'informatique et de recherche opérationnelle, pp.57-75, 1968.

C. Saygin and S. E. Kilic, Integrating Flexible Process Plans with Scheduling in Flexible Manufacturing Systems, The International Journal of Advanced Manufacturing Technology, vol.15, issue.4, pp.268-280, 1999.
DOI : 10.1007/s001700050066

A. K. Sethi and S. P. Sethi, Flexibility in manufacturing: A survey, International Journal of Flexible Manufacturing Systems, vol.2, issue.4, pp.289-328, 1990.
DOI : 10.1007/BF00186471

A. I. Shabaka and H. A. Elmaraghy, A model for generating optimal process plans in RMS, International Journal of Computer Integrated Manufacturing, vol.56, issue.2, pp.180-194, 2008.
DOI : 10.1109/4235.687888

C. Shen, Reconfigurable fixtures for automotive engine machining and assembly applications, Reconfigurable Manufacturing systems and Transformable Factories, pp.155-194, 2006.

R. K. Singh, N. Khilwani, and M. K. Tiwari, Justification for the selection of a reconfigurable manufacturing system: a fuzzy analytical hierarchy based approach, International Journal of Production Research, vol.38, issue.14, pp.3165-3190, 2007.
DOI : 10.1145/175247.175255

N. Srinivas and K. Deb, Muiltiobjective Optimization Using Nondominated Sorting in Genetic Algorithms, Evolutionary Computation, vol.27, issue.3, pp.221-248, 1995.
DOI : 10.1162/evco.1994.2.3.221

K. Takahashi, Selecting an Optimal Production Order and Its Corresponding Configuration in a Reconfigurable Manufacturing System with Multiple Product Groups, Reconfigurable Manufacturing Systems and Transformable Factories, pp.609-626, 2006.
DOI : 10.1007/3-540-29397-3_30

L. Tang, Design and reconfiguration of RMS for part family, 2005.

S. H. Zanakis, Multi-attribute decision making: A simulation comparison of select methods, European Journal of Operational Research, vol.107, issue.3, pp.507-529, 1998.
DOI : 10.1016/S0377-2217(97)00147-1

F. Zhang, Y. F. Zhang, and A. Y. Nee, Using genetic algorithms in process planning for job shop machining, IEEE Transactions on Evolutionary Computation, vol.1, issue.4, pp.278-289, 1997.
DOI : 10.1109/4235.687888

G. Zhang, An analytical comparison on cost and performance among, Reconfigurable Manufacturing Systems and Transformable Factories, pp.659-673, 2006.

J. Zhang, Investigation of the reconfigurable control system for an agile manufacturing cell, International Journal of Production Research, vol.28, issue.15, pp.3709-3723, 2002.
DOI : 10.1016/0360-8352(94)00216-A

Y. F. Zhang, A. N. Saravanan, and J. Y. Fuh, Integration of process planning and scheduling by exploring the flexibility of process planning, International Journal of Production Research, vol.41, issue.3, pp.611-628, 2003.
DOI : 10.1080/0020754021000037874