U. H. Abdullah, X. Zhou, A. Pizzi, M. , and A. , ) tannin and melamine urea formaldehyde impregnated paper: effects of moisture content of resin impregnated papers before pressing on physical properties of overlaid panels, International Wood Products Journal, vol.26, issue.8, 2013.
DOI : 10.1016/j.compositesa.2003.05.001

S. Bardak, B. Sari, G. Nemli, H. Kirci, and M. Baharoglu, The effect of decor paper properties and adhesive type on some properties of particleboard, International Journal of Adhesion and Adhesives, vol.31, issue.6, pp.412-415, 2011.
DOI : 10.1016/j.ijadhadh.2011.02.008

F. Bulian and J. Graystone, Wood coatings Elsevier European Norm EN 438-2 Wood based panels-Melamine faced board for interior uses-Test methods.Water vapor resistance, 2005.

E. Norm and E. Iso, Paint and varnishes-cross cut test, 1994.

E. Standard and E. , Wood-based panels-Determination of modulus of elasticity in bending and of bending strength, 1993.

J. Gu, G. Zhang, S. Dong, Q. Zhang, and J. Kong, Study on preparation and fire-retardant mechanism analysis of intumescent flame-retardant coatings, Surface and Coatings Technology, vol.201, issue.18, pp.7853-7841, 2006.
DOI : 10.1016/j.surfcoat.2007.03.020

A. Kandelbauer, P. Petek, S. Medved, A. Pizzi, and A. Teischinger, ??ber die Eigenschaften eines Melamin-Harnstoff- Formaldehyd Harzes f??r die Dekorpapierbeschichtung, European Journal of Wood and Wood Products, vol.3, issue.1, pp.63-75, 2010.
DOI : 10.1016/j.compositesa.2003.05.001

G. Nemli and G. Colaloglu, The influence of lamination technique on the properties of particleboard, Building and Environment, vol.40, issue.1, pp.83-87, 2005.
DOI : 10.1016/j.buildenv.2004.05.007

G. Nemli, S. Yildiz, and E. D. Gezer, Effects of melamine raw paper weight, varnish type and the structure of continuous pressed laminate (CPL) on the physical, mechanical properties and decay resistance of particleboard, International Biodeterioration & Biodegradation, vol.56, issue.3, pp.166-172, 2005.
DOI : 10.1016/j.ibiod.2005.07.002

A. Pizzi, Wood adhesives chemistry and technology, 1983.

C. B. Wray and C. W. Bert, Mechanical behavior of a composite printed-wiring-board material, Journal of Electronic Materials, vol.7, issue.3, pp.479-497, 1978.
DOI : 10.1007/BF02655649

X. Zhou, A. Pizzi, and G. Du, The effect of nanoclay on melamine-ureaformaldehyde wood adhesives, J. Adhes. Sci. Technol, vol.26, pp.1341-1348, 2012.

X. Zhou, A. Pizzi, A. Sauget, A. Nicollin, X. Li et al., Lightweight tannin foam/composites sandwich panels and the coldset tannin adhesive to assemble them, Industrial Crops and Products, vol.43, pp.255-260, 2013.
DOI : 10.1016/j.indcrop.2012.07.020

URL : https://hal.archives-ouvertes.fr/hal-01296307

N. Ayadi, F. Lejeune, F. Charrier, B. Charrier, M. et al., Colorstability of heat ? treated wood during artificial weathering, Holz Roh Werkst, vol.61, pp.221-226, 2003.

M. Choura, N. M. Belgacem, and A. Gandini, Acid-Catalyzed Polycondensation of Furfuryl Alcohol:?? Mechanisms of Chromophore Formation and Cross-Linking, Macromolecules, vol.29, issue.11, pp.3839-3850, 1996.
DOI : 10.1021/ma951522f

E. Norm and N. En-iso-2409, Paint and varnishes-cross cut test, 1994.

L. Y. Foo and R. W. Hemingway, Condensed Tannins: Reactions of Model Compounds with Furfuryl Alcohol and Furfuraldehyde, Journal of Wood Chemistry and Technology, vol.3, issue.4, pp.135-158, 1985.
DOI : 10.1080/02773818308085173

K. Lepedat, R. Wagner, and J. Et-lang, Laminates (ed) Phenolic resins: A century in progress, 2010.

B. M. Nagaraja, V. S. Kumar, V. Shasikala, A. H. Padmasri, B. Sreedhar et al., A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol, Catalysis Communications, vol.4, issue.6, pp.287-293, 2003.
DOI : 10.1016/S1566-7367(03)00060-8

G. Nemli, Factors affecting some quality properties of the decorative surface overlays, Journal of Materials Processing Technology, vol.195, issue.1-3, pp.218-223, 2008.
DOI : 10.1016/j.jmatprotec.2007.05.001

A. Pizzi, Tannin-based wood adhesives (ed) Wood adhesives chemistry and technology, 1983.

D. Win, Furfural-Gold from garbage, AU J.T, vol.8, issue.4, pp.185-190, 2005.

A. U. Pizzi and A. , Tannin-furfuryl alcohol wood panel adhesives without formaldehyde, Eur J Wood Prod, vol.71, issue.1, pp.131-132, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01593787

M. Arslan, O. Simsek, and . Subasi, Effects of formwork surface materials on concrete lateral pressure, Construction and Building Materials, vol.19, issue.4, pp.319-325, 2005.
DOI : 10.1016/j.conbuildmat.2004.07.007

A. Ballerini, A. Despres, and A. Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels, Holz als Roh- und Werkstoff, vol.59, issue.4, pp.477-478, 2005.
DOI : 10.1007/s00107-005-0048-x

E. C. Bate-smith and T. Swain, Comparative biochemistry, 1957.

E. T. Bisanda, O. W. , and T. J. , Characterisation of tannin resin blends for particle board applications, Cement and Concrete Composites, vol.25, issue.6, pp.593-598, 2003.
DOI : 10.1016/S0958-9465(02)00072-0

S. Bardak, B. Sari, G. Nemli, H. Kirci, and M. Baharoglu, The effect of decor paper properties and adhesive type on some properties of particleboard, International Journal of Adhesion and Adhesives, vol.31, issue.6, pp.412-415, 2011.
DOI : 10.1016/j.ijadhadh.2011.02.008

X. Chen, H. Li, H. Luo, and M. Qiao, Liquid phase hydrogenation of furfural to furfuryl alcohol over Mo-doped Co-B amorphous alloy catalysts, Applied Catalysis A: General, vol.233, issue.1-2, pp.13-20, 2002.
DOI : 10.1016/S0926-860X(02)00127-8

M. Choura, N. M. Belgacem, and A. Gandini, Acid-Catalyzed Polycondensation of Furfuryl Alcohol:?? Mechanisms of Chromophore Formation and Cross-Linking, Macromolecules, vol.29, issue.11, pp.3839-3850, 1996.
DOI : 10.1021/ma951522f

E. Drewes and D. Roux, Condensed tannins. 15. Interrelationships of flavonoid components in wattle-bark extract, Biochemical Journal, vol.87, issue.1, pp.167-72
DOI : 10.1042/bj0870167

L. Y. Foo and H. R. , Condensed Tannins: Reactions of Model Compounds with Furfuryl Alcohol and Furfuraldehyde, Journal of Wood Chemistry and Technology, vol.3, issue.4, pp.135-158, 1985.
DOI : 10.1080/02773818308085173

A. Gandini and M. Belgacem, Furans in polymer chemistry, Progress in Polymer Science, vol.22, issue.6, pp.1203-1379, 1997.
DOI : 10.1016/S0079-6700(97)00004-X

R. Garcia and A. Pizzi, Polycondensation and autocondensation networks in polyflavonoid tannins. I. Final networks, Journal of Applied Polymer Science, vol.70, issue.6, pp.1083-1091, 1998.
DOI : 10.1002/(SICI)1097-4628(19981107)70:6<1083::AID-APP5>3.0.CO;2-K

A. Gardziella, P. L. Knop, and A. , Phenolic resins. Chemistry, applications, standardization, safety and ecology, 2000.

E. Haslam, Natural Polyphenols (Vegetable Tannins) as Drugs:?? Possible Modes of Action, Journal of Natural Products, vol.59, issue.2, pp.205-215, 1996.
DOI : 10.1021/np960040+

E. Haslam, Plant polyphenols: Vegetable tannins revisited, 1989.

W. E. Hillis and G. Urbach, The reaction of (+)-catechin with formaldehyde, Journal of Applied Chemistry, vol.10, issue.9, pp.474-665, 1959.
DOI : 10.1139/o57-029

Y. B. Hoong, P. M. , L. C. , K. M. Loh, and Y. F. , Fortification of sulfited tannin from the bark of Acacia mangium with phenol???formaldehyde for use as plywood adhesive, Industrial Crops and Products, vol.30, issue.3, pp.416-421, 2009.
DOI : 10.1016/j.indcrop.2009.07.012

A. Istek, D. Aydemir, and S. Aksu, The effect of decor paper and resin type on the physical, mechanical, and surface quality properties of particleboards coated with impregnated decor papers, BioResources, vol.5, issue.2, pp.1074-1083, 2010.

C. Kamoun, A. Pizzi, and M. Zanetti, Upgrading melamine-urea-formaldehyde polycondensation resins with buffering additives. I. The effect of hexamine sulfate and its limits, Journal of Applied Polymer Science, vol.46, issue.1, pp.203-214, 2003.
DOI : 10.1007/s001070050428

A. Kandelbauer and A. Tieschinger, Dynamisch mechanische Eigenschaften von mit Melamin-Formaldehyd-Harz impr??gnierten Dekorpapieren, European Journal of Wood and Wood Products, vol.36, issue.2, pp.179-187, 2010.
DOI : 10.1016/j.compositesa.2003.05.001

A. Kandelbauer, P. Petek, S. Medved, A. Pizzi, and A. Teischinger, ??ber die Eigenschaften eines Melamin-Harnstoff- Formaldehyd Harzes f??r die Dekorpapierbeschichtung, European Journal of Wood and Wood Products, vol.3, issue.1, pp.63-75, 2010.
DOI : 10.1016/j.compositesa.2003.05.001

A. Kandelbauer and P. Widsten, Antibacterial melamine resin surfaces for wood-based furniture and flooring, Progress in Organic Coatings, vol.65, issue.3, pp.305-313, 2009.
DOI : 10.1016/j.porgcoat.2008.12.003

K. Kim, S. Kin, H. Kim, and P. J. , Formaldehyde and TVOC emission behaviors according to finishing treatment with surface materials using 20L chamber and FLEC, Journal of Hazardous Materials, vol.177, issue.1-3, pp.90-94, 2010.
DOI : 10.1016/j.jhazmat.2009.09.060

S. Kim, Control of formaldehyde and TVOC emission from wood-based flooring composites at various manufacturing processes by surface finishing, Journal of Hazardous Materials, vol.176, issue.1-3, pp.14-19, 2010.
DOI : 10.1016/j.jhazmat.2009.03.113

S. Kim and H. Kim, Anti-bacterial performance of colloidal silver-treated laminate wood flooring, International Biodeterioration & Biodegradation, vol.57, issue.3, pp.155-162, 2006.
DOI : 10.1016/j.ibiod.2006.02.002

P. E. Laks and P. Mckaig, Flavonoid Biocides: Wood Preservatives Based on Condensed Tannins, Holzforschung, vol.28, issue.1, pp.299-306
DOI : 10.1086/284065

P. Lan, N. Brosse, L. Chrusciel, P. Navarrete, and A. Pizzi, Extraction of condensed tannins from grape pomace for use as wood adhesives, Ind Crop Prod, vol.33, pp.253-257, 2011.

Y. Ling and L. K. , Reusing timber formwork: importance of workmen???s efficiency and attitude, Building and Environment, vol.35, issue.2, pp.135-143, 2000.
DOI : 10.1016/S0360-1323(99)00008-6

N. E. Meikleham and A. Pizzi, Acid- and alkali-catalyzed tannin-based rigid foams, Journal of Applied Polymer Science, vol.53, issue.11, pp.1547-1556, 1994.
DOI : 10.1002/app.1994.070531117

N. Meikleham, A. Pizzi, and A. Stephanou, Induced accelerated autocondensation of polyflavonoid tannins for phenolic polycondensates. I. 13C-NMR, 29Si-NMR, X-ray, and polarimetry studies and mechanism, Journal of Applied Polymer Science, vol.54, issue.12, pp.1827-1845, 1994.
DOI : 10.1002/app.1994.070541206

T. A. Mercer and A. Pizzi, Consideration on the principles of preparation of melamineurea-formaldehyde adhesive resins for particleboard, Holzforschung Holzverwertung, vol.46, pp.51-54, 1994.

A. Moubarik, A. Pizzi, A. Allal, F. Charriera, and B. Charrier, Cornstarch and tannin in phenol???formaldehyde resins for plywood production, Industrial Crops and Products, vol.30, issue.2, pp.188-193, 2009.
DOI : 10.1016/j.indcrop.2009.03.005

URL : https://hal.archives-ouvertes.fr/hal-01584331

A. L. Montero, L. A. Montero, R. Martínez, and S. Spange, Ab initio modelling of crosslinking in polymers. A case of chains with furan rings, Journal of Molecular Structure: THEOCHEM, vol.770, issue.1-3, pp.1-3, 2006.
DOI : 10.1016/j.theochem.2006.05.027

B. M. Nagaraja, P. A. , D. Raju, B. , R. Rao et al., Vapor phase selective hydrogenation of furfural to furfuryl alcohol over Cu???MgO coprecipitated catalysts, Journal of Molecular Catalysis A: Chemical, vol.265, issue.1-2, pp.90-97, 2007.
DOI : 10.1016/j.molcata.2006.09.037

B. Nagaraja, S. Kumar, V. Shasikala, V. Padmasri, A. Sreedhar et al., A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol, Catalysis Communications, vol.4, issue.6, pp.287-293, 2003.
DOI : 10.1016/S1566-7367(03)00060-8

P. Navarette, Adhésifs naturels à base de tannin, tannin/lignine et lignine/gluten pour la fabrication de panneaux de bois, 2011.

B. Ndazi, T. J. Karlsson, S. Bisanda, and E. T. , Production of rice husks composites with Acacia mimosa tannin-based resin, Journal of Materials Science, vol.4, issue.21, pp.6978-6983, 2006.
DOI : 10.1007/s10853-006-0220-7

G. Nemli and M. Usta, Influences of some manufacturing factors on the important quality properties of melamine-impregnated papers, Building and Environment, vol.39, issue.5, pp.567-570, 2004.
DOI : 10.1016/j.buildenv.2003.12.008

G. Nemli, G. E. Hiziroglu, and S. , The changes in important quality properties of continuous pressed laminates (CPL) with some changes in thickness and press parameters, Building and Environment, vol.38, issue.7, pp.913-917, 2003.
DOI : 10.1016/S0360-1323(03)00030-1

A. Nicollin, R. Kueny, L. Toniazzo, and A. Pizzi, High density biocomposite from natural fibers and tannin resin, J Adhes Sci Technol, vol.26, pp.1537-1545, 2012.

S. Ohara and H. R. , Condensed Tannins: The Formation of a Diarylpropanol-Catechinic Acid Dimer from Base-Catalyzed Reactions of (+)-Catechin, Journal of Wood Chemistry and Technology, vol.42, issue.2, pp.195-208, 19991.
DOI : 10.3987/COM-88-S97

E. Papadopoulou, A. Hatjiissaak, B. Estrine, and S. Marinkovic, Neuartige Verwendung von aus Biomasse hergestellten Alkylxylosiden f??r Benetzungsmittel zur Papierimpr??gnierung in der Holzwerkstoffindustrie, European Journal of Wood and Wood Products, vol.281, issue.4, pp.579-585, 2011.
DOI : 10.1016/j.colsurfa.2006.02.039

F. Pichelin, M. Nakatani, A. Pizzi, S. Wieland, A. Despres et al., Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives, Forest Prod J, vol.56, issue.5, pp.31-36, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00187312

F. Pichelin, C. Kamoun, and A. Pizzi, Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives, Holz als Roh- und Werkstoff, vol.57, issue.5, pp.305-317, 1999.
DOI : 10.1007/s001070050349

A. Pilato, Phenolic resins: A century of progress, 2010.
DOI : 10.1007/978-3-642-04714-5

A. Pizzi, R. Kueny, F. Lecoanet, B. Massetau, D. Carpentier et al., High resin content natural matrix???natural fibre biocomposites, Industrial Crops and Products, vol.30, issue.2, pp.235-240, 2009.
DOI : 10.1016/j.indcrop.2009.03.013

A. Pizzi and K. L. Mittal, Handbook of adhesive technology, revised and expanded, 2003.
DOI : 10.1201/9780203912225

A. Pizzi and P. Tekely, C NMR Study, Holzforschung, vol.52, issue.3, pp.277-281, 1996.
DOI : 10.1021/ma50006a076

A. Pizzi and P. Tekely, Mechanism of polyphenolic tannin resin hardening by hexamethylenetetramine: CP???MAS 13C-NMR, Journal of Applied Polymer Science, vol.56, issue.12, pp.1645-1650, 1995.
DOI : 10.1002/app.1995.070561215

A. Pizzi, C. F. Lu, Y. Shi, and Q. , Larch tannin adhesive for particleboard, Holz Roh Werkst, vol.53, pp.17-19, 1995.

A. Pizzi, N. Meikleham, B. Dombo, and W. Roll, Tanninkleber f??r Spanplatten, hergestellt durch Autokondensation und ohne Emission von Schadstoffen, Holz als Roh- und Werkstoff, vol.51, issue.2, pp.201-204, 1995.
DOI : 10.1007/BF02716424

A. Pizzi, J. Valenezuela, and C. Westermeyer, Niedrige Formaldehyd-Emission und Kurze Pre??zeiten bei der Hestellung von Spanplatten f??r Au??enverwendung mit Tanninen aus Kiefernrinde und Hickory-N??ssen, Holz als Roh- und Werkstoff, vol.47, issue.5, pp.311-315, 1994.
DOI : 10.1007/978-1-4615-3476-1_59

A. Pizzi, Advanced wood adhesive technology, 1994.

A. Pizzi and A. Stephanou, A 13C NMR study of polyflavonoid tannin adhesive intermediates. I. Noncolloidal performance determining rearrangements, Journal of Applied Polymer Science, vol.51, issue.13, pp.2109-2124, 1994.
DOI : 10.1002/app.1994.070511302

A. Pizzi and A. Stephanou, A 13C NMR study of polyflavonoid tannin adhesive intermediates. II. Colloidal state reactions, Journal of Applied Polymer Science, vol.51, issue.13, pp.2125-2130, 1994.
DOI : 10.1002/app.1994.070511303

A. Pizzi and A. Stephanou, Comparative and differential behavior of pine vs. pecan nut tannin adhesives for particleboard, Holzforschung und Holzwervertung, vol.45, issue.2, p.30, 1993.

A. Pizzi and C. W. , Polyflavonoid tannins ? a main cause of soft-rot failure in CCA-treated timber, Wood Science and Technology, vol.17, issue.1, pp.71-81, 1986.
DOI : 10.1007/BF00350695

A. Pizzi, Wood adhesives chemistry and technology, 1983.

A. Pizzi and C. F. , Reduzierung von Pre??temperatur und Klebstoffmenge durch Metallionen-Katalysatoren bei der Herstellung Tanningebundener Spanplatten, Holz als Roh- und Werkstoff, vol.24, issue.12, pp.463-467, 1981.
DOI : 10.1007/BF02606463

A. Pizzi and H. Scharfetter, Bindemittel und Verfahrenstechniken er??ffnen neue M??glichkeiten f??r die Holzindustrie, Holz als Roh- und Werkstoff, vol.3, issue.7, pp.85-89, 1981.
DOI : 10.1080/00222358008081043

A. Pizzi, The chemistry and development of tannin/urea???formaldehyde condensates for exterior wood adhesives, Journal of Applied Polymer Science, vol.23, issue.9, pp.2777-2792, 1979.
DOI : 10.1002/app.1979.070230922

A. Pizzi and D. Roux, The chemistry and development of tannin-based weather- and boil-proof cold-setting and fast-setting adhesives for wood, Journal of Applied Polymer Science, vol.22, issue.7, pp.1945-54, 1978.
DOI : 10.1002/app.1978.070220715

A. Pizzi, Chemistry and technology of cold and thermosetting wattle tannin based wood adhesives, 1977.

L. J. Porter, The flavonoids, J.B. Harborne, 1988.

R. J. Roberts and P. D. Evans, Effects of manufacturing variables on surface quality and distribution of melamine formaldehyde resin in paper laminates, Composites Part A: Applied Science and Manufacturing, vol.36, issue.1, pp.95-104, 2005.
DOI : 10.1016/S1359-835X(04)00127-7

C. T. Robbins, T. A. Hanley, E. A. Hagerman, O. Hjeljord, D. L. Baker et al., Role of Tannins in Defending Plants Against Ruminants: Reduction in Protein Availability, Ecology, vol.68, issue.1, pp.98-107, 1987.
DOI : 10.2307/1938809

E. Roffael, B. Dix, and J. Okum, Use of spruce tannin as a binder in particleboards and medium density fiberboards (MDF), Holz als Roh- und Werkstoff, vol.58, issue.5, pp.301-3055, 2000.
DOI : 10.1007/s001070050432

D. G. Roux, D. Ferreira, H. K. Hundt, and E. Malan, Structure stereochemistry and reactivity of natural condensed tannins as basis for their extended industrial application, 1975.

D. G. Roux and E. Paulus, spp, Biochemical Journal, vol.78, issue.4, pp.785-794, 1961.
DOI : 10.1042/bj0780785

H. M. Saayman and R. D. , The origins of tannins and flavonoids in black-wattle barks and heartwoods, and their associated ???non-tannin??? components, Biochemical Journal, vol.97, issue.3, pp.794-801, 1965.
DOI : 10.1042/bj0970794

T. P. Schultz and N. D. , Development of environmentally-benign wood preservatives based on the combination of organic biocides with antioxidants and metal chelators, Phytochemistry, vol.61, issue.5, pp.555-560, 2002.
DOI : 10.1016/S0031-9422(02)00267-4

T. P. Schultz and N. D. , Naturally durable heartwood: evidence for a proposed dual defensive function of the extractives, Phytochemistry, vol.54, issue.1, pp.47-52, 2000.
DOI : 10.1016/S0031-9422(99)00622-6

T. P. Schultz, W. B. Harms, T. H. Fisher, M. K. Minn, J. et al., Durability of Angiosperm Heartwood: The Importance of Extractives, Holzforschung, vol.29, issue.1, pp.29-34, 1995.
DOI : 10.1016/S0031-9422(00)86247-0

T. Tabarsa, S. Jahanshahi, and A. Ashori, Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol???formaldehyde adhesive, Composites Part B: Engineering, vol.42, issue.2, pp.176-180, 2011.
DOI : 10.1016/j.compositesb.2010.09.012

G. Tondi, Développement de résines de polycondensation à base de tannins pour produits industriels écologiques et innovants -Mousses rigides et produits de préservation bois, 2009.

G. Tondi, V. Fierro, A. Pizzi, and A. Celzard, Tannin-based carbon foams, Carbon, vol.47, issue.6, pp.1480-1492, 2009.
DOI : 10.1016/j.carbon.2009.01.041

G. Tondi, W. Zhao, A. Pizzi, G. Du, V. Fierro et al., Tannin-based rigid foams: A survey of chemical and physical properties, Bioresource Technology, vol.100, issue.21, pp.5162-5169, 2009.
DOI : 10.1016/j.biortech.2009.05.055

G. Tondi, A. Pizzi, and R. Olives, Natural tannin-based rigid foams as insulation for doors ansd wall panels, Maderas Ciencia y technologia, vol.10, issue.3, pp.219-227, 2008.

J. F. Walker, Formaldehyde. American Chemical Soc. Monograph Series 159, Am Chem, 1964.

G. Vazquez, G. Antorrena, F. J. Arias, M. C. Gonzfilez, and J. , Phenolharze f??r die Sperrholzverleimung, hergestellt aus Rindenextrakten von Pinus pinaster, Holz als Roh- und Werkstoff, vol.50, issue.3, pp.221-224, 1993.
DOI : 10.1007/BF02628284

G. Vazquez, G. Antorrena, F. J. Gonzalez, and J. , Eigenschaften von Phenol-Tannin-Harzen aus Rindenextrakten von Pinus pinaster als Kleber f??r Eucalyptus-Sperrholz, Holz als Roh- und Werkstoff, vol.43, issue.1, pp.253-256, 1992.
DOI : 10.1007/BF02650319

L. Zhao, B. Cao, F. Wang, and Y. Yazaki, Sperrholzkleber aus Akazien-Tannin f??r Au??enverwendung, Holz als Roh- und Werkstoff, vol.42, issue.6, pp.117-122, 1995.
DOI : 10.1042/bj0740044

T. Yoshida, T. Hatano, and H. Ito, Chapter Seven High molecular weight plant polyphenols (tannins): Prospective function. Recent Adv Phytochem, pp.163-190, 2005.
DOI : 10.1016/s0079-9920(05)80008-5

W. V. Zucker, Tannins: Does Structure Determine Function? An Ecological Perspective, The American Naturalist, vol.121, issue.3, pp.335-365, 1983.
DOI : 10.1086/284065