H. Catalgil-giz, A. Giz, A. M. Alb, and W. F. Reed, Absolute online monitoring of acrylic acid polymerization and the effect of salt and pH on reaction kinetics, Journal of Applied Polymer Science, vol.11, issue.2, pp.1352-1359, 2004.
DOI : 10.1016/0014-3057(75)90140-8

D. S. Achilias, A Review of Modeling of Diffusion Controlled Polymerization Reactions, Macromolecular Theory and Simulations, vol.45, issue.4, pp.319-347, 2007.
DOI : 10.1007/978-1-4613-1801-9

S. S. Agarwal and C. Kleinstreuer, Analysis of styrene polymerization in a continuous flow tubular reactor, Chemical Engineering Science, vol.41, issue.12, pp.3101-3110, 1986.
DOI : 10.1016/0009-2509(86)85047-3

A. Aït-kadi, P. Marchal, L. Choplin, A. Chrissemant, and M. Bousmina, Quantitative Analysis of Mixer-Type Rheometers using the Couette Analogy, The Canadian Journal of Chemical Engineering, vol.44, issue.6, pp.1166-1174, 2002.
DOI : 10.1122/1.1308520

K. S. Anseth, R. A. Scott, and N. A. Peppas, Effects of Ionization on the Reaction Behavior and Kinetics of Acrylic Acid Polymerizations, Macromolecules, vol.29, issue.26, pp.8308-8312, 1996.
DOI : 10.1021/ma960840r

Z. Anxionnaz, M. Cabassud, C. Gourdon, and P. Tochon, Transposition of an Exothermic Reaction From a Batch Reactor to an Intensified Continuous One, Heat Transfer Engineering, vol.84, issue.9, pp.788-797, 2010.
DOI : 10.1205/cherd05027

Z. Anxionnaz, M. Cabassud, C. Gourdon, and P. Tochon, Heat exchanger/reactors (HEX reactors): Concepts, technologies: State-of-the-art, Chemical Engineering and Processing: Process Intensification, vol.47, issue.12, pp.2029-2050, 2008.
DOI : 10.1016/j.cep.2008.06.012

J. Barth, W. Meiser, and M. Buback, SP-PLP-EPR Study into Termination and Transfer Kinetics of Non-Ionized Acrylic Acid Polymerized in Aqueous Solution, Macromolecules, vol.45, issue.3, 2012.
DOI : 10.1021/ma202322a

T. Bayer, D. Pysall, and O. Wachsen, Micro mixing effects in continuous radical polymerization, pp.165-170, 2000.
DOI : 10.1007/978-3-642-59738-1_15

R. S. Benson and J. W. Ponton, Process Miniaturization -A Route To Total Environmental Acceptability, Chem. Eng. Res. Des, vol.71, pp.160-168, 1993.

A. E. Bergles, Heat Transfer Enhancement???The Maturing of Second-Generation Heat Transfer Technology, Heat Transfer Engineering, vol.94, issue.1, pp.47-55, 1997.
DOI : 10.1115/1.3244320

F. Berruti, C. Briens, F. Berruti, and L. Ferrante, A Mobile Pyrolyzer for Converting Agricultural and Forestry Residues into Liquid Bio-Oil and, 2013.

J. A. Biesenberger, Principles of polymerization engineering, 1983.

L. Blavier and J. Villermaux, Free radical polymerization engineering???II, Chemical Engineering Science, vol.39, issue.1, pp.101-110, 1984.
DOI : 10.1016/0009-2509(84)80134-7

K. Boodhoo and A. Harvey, Process Intensification: An Overview of Principles and Practice Process Intensification for Green Chemistry, pp.1-31, 2013.

K. V. Boodhoo, W. A. Dunk, and R. J. Jachuck, Influence of centrifugal field on free-radical polymerization kinetics, Journal of Applied Polymer Science, vol.20, issue.11, pp.2283-2286, 2002.
DOI : 10.1021/ma00168a048

K. V. Boodhoo and R. J. Jachuck, Process intensification: spinning disk reactor for styrene polymerisation, Applied Thermal Engineering, vol.20, issue.12, pp.1127-1146, 2000.
DOI : 10.1016/S1359-4311(99)00071-X

A. Botella, J. Dupuy, A. Roche, H. Sautereau, and V. Verney, Photo-Rheometry/NIR Spectrometry: An in situ Technique for Monitoring Conversion and Viscoelastic Properties during Photopolymerization, Macromolecular Rapid Communications, vol.25, issue.12, pp.1155-1158, 2004.
DOI : 10.1002/marc.200400087

N. Brun, M. Chevrel, L. Falk, S. Hoppe, A. Durand et al., Contribution of Raman Spectroscopy to In Situ Monitoring of a High-Impact Polystyrene Process, Chemical Engineering & Technology, vol.80, issue.208, pp.275-282, 2014.
DOI : 10.1002/cjce.5450800618

URL : https://hal.archives-ouvertes.fr/hal-01117100

N. Brun, I. Youssef, M. Chevrel, D. Chapron, C. Schrauwen et al., In situ monitoring of styrene polymerization using Raman spectroscopy. Multi-scale approach of homogeneous and heterogeneous polymerization processes, Journal of Raman Spectroscopy, vol.51, issue.6, pp.909-915, 2013.
DOI : 10.1021/ie302054k

URL : https://hal.archives-ouvertes.fr/hal-00806854

M. Buback, P. Hesse, and I. Lacík, Propagation Rate Coefficient and Fraction of Mid-Chain Radicals for Acrylic Acid Polymerization in Aqueous Solution, Macromolecular Rapid Communications, vol.38, issue.21, pp.2049-2054, 2007.
DOI : 10.1039/P29940001759

E. Cao and A. Gavriilidis, Oxidative dehydrogenation of methanol in a microstructured reactor, Catalysis Today, vol.110, issue.1-2, pp.154-163, 2005.
DOI : 10.1016/j.cattod.2005.09.005

C. C. Chen, A Continuous Bulk Polymerization Process for Crystal Polystyrene, Polymer-Plastics Technology and Engineering, vol.16, issue.1, pp.55-81, 1994.
DOI : 10.1002/aic.690210408

C. Chen, Continuous production of solid polystyrene in back-mixed and linear-flow reactors, Polymer Engineering & Science, vol.72, issue.2, pp.441-464, 2000.
DOI : 10.1080/10543414.1998.10744489

C. C. Chen and E. B. Nauman, Verification of a complex, variable viscosity model for a tubular polymerization reactor, Chemical Engineering Science, vol.44, issue.1, pp.179-188, 1989.
DOI : 10.1016/0009-2509(89)85243-1

W. Y. Chiu, G. M. Carratt, and D. S. Soong, A computer model for the gel effect in free-radical polymerization, Macromolecules, vol.16, issue.3, pp.348-357, 1983.
DOI : 10.1021/ma00237a002

L. Choplin, P. Marchal, . Baravian, and . Langevin, Rhéologie et produits formulés complexes, 2010.

M. Cioffi, K. J. Ganzeveld, A. C. Hoffmann, and L. Janssen, Rheokinetics of linear polymerization. A literature review, Polymer Engineering & Science, vol.25, issue.12, pp.2383-2392, 2002.
DOI : 10.1002/pen.11124

M. Cioffi, K. J. Ganzeveld, A. C. Hoffmann, and L. Janssen, A rheokinetic study of bulk free radical polymerization performed with a helical barrel rheometer, Polymer Engineering and Science, vol.25, issue.1, pp.179-185, 2004.
DOI : 10.1002/9783527614950

M. Cioffi, A. C. Hoffmann, and L. Janssen, Reducing the gel effect in free radical polymerization, Chemical Engineering Science, vol.56, issue.3, pp.911-915, 2001.
DOI : 10.1016/S0009-2509(00)00305-5

M. Cioffi, A. C. Hoffmann, and L. P. Janssen, Rheokinetics and the influence of shear rate on the Trommsdorff (gel) effect during free radical polymerization, Polymer Engineering & Science, vol.32, issue.3, pp.595-602, 2001.
DOI : 10.1002/9783527614950

E. F. Costa, P. L. Lage, and E. C. Biscaia, On the numerical solution and optimization of styrene polymerization in tubular reactors, Computers & Chemical Engineering, vol.27, issue.11, pp.1591-1604, 2003.
DOI : 10.1016/S0098-1354(03)00114-5

T. O. Craig, Heat transfer during polymerization in motionless mixers, Polymer Engineering and Science, vol.24, issue.18, pp.1386-1389, 1987.
DOI : 10.1002/pen.760271806

M. M. Cross, Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems, Journal of Colloid Science, vol.20, issue.5, pp.417-437, 1965.
DOI : 10.1016/0095-8522(65)90022-X

S. S. Cutié, P. B. Smith, D. E. Henton, T. L. Staples, and C. Powell, Acrylic acid polymerization kinetics, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.13, pp.2029-2047, 1997.
DOI : 10.1002/(SICI)1099-0488(19970930)35:13<2029::AID-POLB4>3.0.CO;2-R

D. Toledo, E. C. Martini, R. F. Maciel, M. R. Maciel-filho, and R. , Process intensification for high operational performance target: Autorefrigerated cstr polymerization reactor, Comput. Chem. Eng, vol.29, pp.1447-1455, 2005.
DOI : 10.1016/S1570-7946(04)80151-2

J. Desbrieres, Viscosity of Semiflexible Chitosan Solutions: Influence of Concentration, Temperature, and Role of Intermolecular Interactions, Biomacromolecules, vol.3, issue.2, pp.342-349, 2002.
DOI : 10.1021/bm010151+

URL : https://hal.archives-ouvertes.fr/hal-00307340

J. Dong, Y. Ozaki, and K. Nakashima, Infrared, Raman, and Near-Infrared Spectroscopic Evidence for the Coexistence of Various Hydrogen-Bond Forms in Poly(acrylic acid), Macromolecules, vol.30, issue.4, pp.1111-1117, 1997.
DOI : 10.1021/ma960693x

D. Bodoc, M. Prat, L. Xuereb, C. Gourdon, C. Lasuye et al., Online Monitoring of Vinyl Chloride Polymerization in a Microreactor Using Raman Spectroscopy, Chemical Engineering & Technology, vol.46, issue.18, pp.705-712, 2012.
DOI : 10.1016/j.polymer.2005.06.091

URL : https://hal.archives-ouvertes.fr/hal-00743489

D. I. Enache, W. Thiam, D. Dumas, S. Ellwood, G. J. Hutchings et al., Intensification of the solvent-free catalytic hydroformylation of cyclododecatriene: Comparison of a stirred batch reactor and a heat-exchange reactor, Catalysis Today, vol.128, issue.1-2, pp.18-25, 2007.
DOI : 10.1016/j.cattod.2007.08.011

L. Falk and J. Commenge, Performance comparison of micromixers, Chemical Engineering Science, vol.65, issue.1, pp.405-411, 2010.
DOI : 10.1016/j.ces.2009.05.045

URL : https://hal.archives-ouvertes.fr/hal-00799578

L. Falk, . De-bellefon-claude, and C. Gourdon, Intensification des procédés, Actual. Chim, pp.101-111, 2010.

S. Ferrouillat, P. Tochon, D. D. Valle, and H. Peerhossaini, Open loop thermal control of exothermal chemical reactions in multifunctional heat exchangers, International Journal of Heat and Mass Transfer, vol.49, issue.15-16, pp.2479-2490, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.01.023

URL : https://hal.archives-ouvertes.fr/hal-00205080

P. Fleury, T. Meyer, and A. Renken, Solution polymerization of methyl-methacrylate at high conversion in a recycle tubular reactor, Chemical Engineering Science, vol.47, issue.9-11, pp.2597-2602, 1992.
DOI : 10.1016/0009-2509(92)87099-C

G. E. Fonseca, M. A. Dubé, and A. Penlidis, A Critical Overview of Sensors for Monitoring Polymerizations, Macromolecular Reaction Engineering, vol.47, issue.133, pp.327-373, 2009.
DOI : 10.1002/masy.19961110119

E. Fourcade, H. C. Hoefsloot, G. Van-vliet, W. Bunge, S. M. Mutsers et al., The influence of micromixing on molecular weight distribution during controlled Polypropylene degradation in a static mixer reactor, Chemical Engineering Science, vol.56, issue.23, pp.6589-6603, 2001.
DOI : 10.1016/S0009-2509(01)00345-1

M. Fournier, L. Falk, and J. Villermaux, A new parallel competing reaction system for assessing micromixing efficiency???Experimental approach, Chemical Engineering Science, vol.51, issue.22, pp.5053-5064, 1996.
DOI : 10.1016/0009-2509(96)00270-9

F. García, J. M. García, F. Rubio, J. L. De-la-peña, J. Guzmán et al., Reaction kinetics and gel effect on the polymerization of 2-ethoxyethyl methacrylate and 2(2-ethoxyethoxy) ethyl methacrylate, Journal of Polymer Science Part A: Polymer Chemistry, vol.30, issue.22, pp.3987-4001, 2002.
DOI : 10.1021/ma970288l

. Goretta, Continuous process for the preparation of an acrylic acid-methyl acrylate copolymer in a tubular reactor, 4196272.

E. Gulari, K. Mckeigue, and K. Y. Ng, Raman and FTIR spectroscopy of polymerization: bulk polymerization of methyl methacrylate and styrene, Macromolecules, vol.17, issue.9, pp.1822-1825, 1984.
DOI : 10.1021/ma00139a034

J. W. Hamer and W. H. Ray, Continuous tubular polymerization reactors???I.A detailed model, Chemical Engineering Science, vol.41, issue.12, pp.3083-3093, 1986.
DOI : 10.1016/0009-2509(86)85045-X

M. P. Harold and B. A. Ogunnaike, Process engineering in the evolving chemical industry, AIChE Journal, vol.18, issue.11, pp.2123-2127, 2000.
DOI : 10.1002/aic.690461105

D. Hendershot, Process minimization: Making plants safer, Chem. Eng. Prog, vol.96, pp.35-40, 2000.

D. E. Henton, C. Powell, and R. E. Reim, The decomposition of sodium persulfate in the presence of acrylic acid, Journal of Applied Polymer Science, vol.64, issue.3, pp.591-600, 1997.
DOI : 10.1002/(SICI)1097-4628(19970418)64:3<591::AID-APP15>3.0.CO;2-0

V. Hessel, H. Löwe, and F. Schönfeld, Micromixers???a review on passive and active mixing principles, Chemical Engineering Science, vol.60, issue.8-9, pp.2479-2501, 2005.
DOI : 10.1016/j.ces.2004.11.033

Z. Ismagilov, V. Pushkarev, O. Y. Podyacheva, N. Koryabkina, and H. Veringa, A catalytic heat-exchanging tubular reactor for combining of high temperature exothermic and endothermic reactions, Chemical Engineering Journal, vol.82, issue.1-3, pp.355-360, 2001.
DOI : 10.1016/S1385-8947(00)00349-1

T. Iwasaki, N. Kawano, and J. Yoshida, Radical Polymerization Using Microflow System:?? Numbering-up of Microreactors and Continuous Operation, Organic Process Research & Development, vol.10, issue.6, pp.1126-1131, 2006.
DOI : 10.1021/op060127u

T. Iwasaki and J. Yoshida, Free Radical Polymerization in Microreactors. Significant Improvement in Molecular Weight Distribution Control, Macromolecules, vol.38, issue.4, pp.1159-1163, 2005.
DOI : 10.1021/ma048369m

R. Jachuck, Process Intensification for Responsive Processing, Chemical Engineering Research and Design, vol.80, issue.3, pp.233-238, 2002.
DOI : 10.1205/026387602753581980

M. Janicke, The Controlled Oxidation of Hydrogen from an Explosive Mixture of Gases Using a Microstructured Reactor/Heat Exchanger and Pt/Al2O3 Catalyst, Journal of Catalysis, vol.191, issue.2, pp.282-293, 2000.
DOI : 10.1006/jcat.2000.2819

L. Janssen, On the stability of reactive extrusion, Polymer Engineering & Science, vol.37, issue.12, pp.2010-2019, 1998.
DOI : 10.1002/pen.10370

T. Junkers and C. Barner-kowollik, The role of mid-chain radicals in acrylate free radical polymerization: Branching and scission, Journal of Polymer Science Part A: Polymer Chemistry, vol.61, issue.23, pp.7585-7605, 2008.
DOI : 10.1002/masy.19991430118

L. T. Kale and K. F. Odisoll, Rheokinetics of polymerization of N-laurylmethacrylate, Polymer Engineering and Science, vol.55, issue.7, pp.402-409
DOI : 10.1002/pen.760220703

J. M. Kelley, Styrene polymerization process. US5274029 (A), 1993.

F. I. Khan and P. R. Amyotte, How to Make Inherent Safety Practice a Reality, The Canadian Journal of Chemical Engineering, vol.3, issue.1, pp.2-16, 2003.
DOI : 10.1002/9780470938270

C. Kiparissides, A. Baltsas, S. Papadopoulos, J. P. Congalidis, J. R. Richards et al., Mathematical Modeling of Free-Radical Ethylene Copolymerization in High-Pressure Tubular Reactors, Industrial & Engineering Chemistry Research, vol.44, issue.8, pp.2592-2605, 2005.
DOI : 10.1021/ie049596f

T. A. Kletz, Inherently safer design: the growth of an idea. Process Saf, Prog, vol.15, pp.5-8, 1996.

H. Krummradt, U. Koop, and J. Stoldt, Experiences with the use of microreactors in organic synthesis, Microreaction Technology: Industrial Prospects, pp.181-186, 2000.
DOI : 10.1007/978-3-642-59738-1_17

P. L. Ku, Polystyrene and styrene copolymers: Their manufacture and application. II, Advances in Polymer Technology, vol.8, issue.3, pp.201-223, 1988.
DOI : 10.1002/adv.1988.060080301

F. Kuchta, A. M. Van-herk, and A. L. German, Propagation Kinetics of Acrylic and Methacrylic Acid in Water and Organic Solvents Studied by Pulsed-Laser Polymerization, Macromolecules, vol.33, issue.10, pp.3641-3649, 2000.
DOI : 10.1021/ma990906t

S. G. Kulichikhin, A. Y. Malkin, O. M. Polushkina, and V. G. Kulichikhin, Rheokinetics of free-radical polymerization of acrylamide in an aqueous solution, Polymer Engineering & Science, vol.39, issue.8, pp.1331-1338, 1997.
DOI : 10.1002/pen.11779

I. Laaik, . Beueeaa, and M. Buak, EC " tud into Free-Radical Propagation Rate of Nonionized Acrylic Acid in Aqueous Solution, Macromolecules, vol.36, pp.9355-9363

I. Lacík, S. Beuermann, and M. Buback, PLP-SEC Study into the Free-Radical Propagation Rate Coefficients of Partially and Fully Ionized Acrylic Acid in Aqueous Solution, Macromolecular Chemistry and Physics, vol.205, issue.8, pp.1080-1087, 2004.
DOI : 10.1002/macp.200300251

. Leroux, Acide acrylique, 1993.

P. Leveson, W. A. Dunk, and R. J. Jachuck, Investigation of shear effects on styrene free radical polymerization using a narrow channel reactor, Journal of Applied Polymer Science, vol.90, issue.4, pp.1365-1369, 2004.
DOI : 10.1002/0471220450

Z. Liu, T. Jin, and M. Kind, Continuous polymerization of methyl methacrylate in a taylor-couette reactor. I. Influence of fluid dynamics on monomer conversion, Polymer Engineering & Science, vol.60, issue.1, pp.96-104, 2013.
DOI : 10.1002/cite.330601204

L. Kelley, F. Brodnyan, and J. , The Rheology of Polyelectrolytes II. Dependence of the Viscosity of Solutions of Poly (Acrylic Acid) on Molecular Weight, Progress in International Research on Thermodynamics and Transport Properties. Presented at the Symposium on Thermophysical Properties, pp.728-737, 1962.
DOI : 10.1016/B978-1-4832-0083-5.50071-3

N. Lorber, B. Pavageau, and E. Mignard, Droplet-Based Millifluidics as a New Miniaturized Tool to Investigate Polymerization Reactions, Macromolecules, vol.43, issue.13, pp.5524-5529, 2010.
DOI : 10.1021/ma100233r

L. Luo, Heat & Mass Transfer Intensification and Shape Optimization a Multi-scale Approach, 2012.

S. Machefer, L. Falk, and F. De-panthou, Intensification principle of a new three-phase catalytic slurry reactor. Part I: Performance characterisation, Chemical Engineering and Processing: Process Intensification, vol.70, pp.277-288, 2013.
DOI : 10.1016/j.cep.2013.04.014

URL : https://hal.archives-ouvertes.fr/hal-01282097

A. Y. Malkin, Rheology in polymerization processes, Polymer Engineering and Science, vol.1, issue.15, 1035.
DOI : 10.1002/pol.1974.130120506

S. Mascia, P. L. Heider, H. Zhang, R. Lakerveld, B. Benyahia et al., End-to-End Continuous Manufacturing of Pharmaceuticals: Integrated Synthesis, Purification, and Final Dosage Formation, Angewandte Chemie International Edition, vol.54, issue.47, pp.12359-12363, 2013.
DOI : 10.1016/S0939-6411(02)00061-9

W. L. Mccabe, J. C. Smith, and . Harriott, Unit operations of chemical engineering, 1993.

H. E. Meijer, M. K. Singh, and P. D. Anderson, On the performance of static mixers: A quantitative comparison, Progress in Polymer Science, vol.37, issue.10, pp.1333-1349, 2012.
DOI : 10.1016/j.progpolymsci.2011.12.004

T. Meyer, R. David, A. Renken, and J. Villermaux, Micromixing in a static mixer and an empty tube by a chemical method, Chem. Eng. Sci, vol.43, 1955.

R. J. Minari, G. Caceres, P. Mandelli, M. M. Yossen, M. Gonzalez-sierra et al., Semibatch Aqueous-Solution Polymerization of Acrylic Acid: Simultaneous Control of Molar Masses and Reaction Temperature, Macromolecular Reaction Engineering, vol.116, issue.5-6, pp.223-231, 2011.
DOI : 10.1016/j.eurpolymj.2004.09.002

M. Hsing, I. Srinivasan, R. Harold, M. P. Jensen, K. F. Schmidt et al., Simulation of micromachined chemical reactors for heterogeneous partial oxidation reactions, Chemical Engineering Science, vol.55, issue.1, pp.3-13, 2000.
DOI : 10.1016/S0009-2509(99)00306-1

D. A. Mortimer, Synthetic polyelectrolytes???A review, Polymer International, vol.66, issue.1, pp.29-41, 1991.
DOI : 10.1007/978-94-009-9938-1

C. Murli and Y. Song, Pressure-Induced Polymerization of Acrylic Acid: A Raman Spectroscopic Study, The Journal of Physical Chemistry B, vol.114, issue.30, pp.9744-9750, 2010.
DOI : 10.1021/jp1034757

E. B. Nauman, Enhancement of heat transfer and thermal homogenity with motionless mixers, AIChE Journal, vol.25, issue.2, pp.246-258, 1979.
DOI : 10.1002/aic.690250206

E. B. Nauman, Chemical reactor design, optimization, and scaleup, 2002.
DOI : 10.1002/9780470282076

R. R. Netz and D. Andelman, Neutral and charged polymers at interfaces, Physics Reports, vol.380, issue.1-2, pp.1-95, 2003.
DOI : 10.1016/S0370-1573(03)00118-2

N. Nguyen and Z. Wu, Micromixers???a review, Journal of Micromechanics and Microengineering, vol.15, issue.2, pp.1-16, 2005.
DOI : 10.1088/0960-1317/15/2/R01

G. A. Oneil and J. M. Tokelso, Modeling Insight into the Diffusion-Limited Cause of the Gel Effect in Free Radical Polymerization, Macromolecules, vol.32, issue.2, pp.411-422
DOI : 10.1021/ma9811324

G. A. Oeil, M. B. Wisudel, and J. M. Tokelso, Gel effeet i fee adial poleeizatio: Model discrimination of its cause, AIChE J, vol.44, pp.1226-1231

P. Oxley, C. Brechtelsbauer, F. Ricard, N. Lewis, and C. Ramshaw, Evaluation of Spinning Disk Reactor Technology for the Manufacture of Pharmaceuticals, Industrial & Engineering Chemistry Research, vol.39, issue.7, pp.2175-2182, 2000.
DOI : 10.1021/ie990869u

E. L. Paul, V. Atiemo-obeng, and S. M. Kresta, Handbook of industrial mixing: science and practice, 2004.
DOI : 10.1002/0471451452

L. Prat, A. Devatine, P. Cognet, M. Cabassud, C. Gourdon et al., Performance Evaluation of a Novel Concept ???Open Plate Reactor??? Applied to Highly Exothermic Reactions, Chemical Engineering & Technology, vol.47, issue.9, pp.1028-1034, 2005.
DOI : 10.1002/ceat.200500120

C. Ramshaw, Process Intensification and Green Chemistry, Green Chemistry, vol.1, issue.1, pp.15-17, 1999.
DOI : 10.1039/gc990g15

D. Reay, The role of process intensification in cutting greenhouse gas emissions, Applied Thermal Engineering, vol.28, issue.16, pp.2011-2019, 2008.
DOI : 10.1016/j.applthermaleng.2008.01.004

D. A. Reay and A. Harvey, Process intensification: engineering for efficiency, sustainability and flexibility. Elseviert/Butterworh-Heinemann, 2008.

J. M. Ritchie, P. Droegemueller, and M. J. Simmons, hiTRAN?? Wire Matrix Inserts in Fouling Applications, hiTRAN® Wire Matrix Inserts in Fouling Applications, pp.876-884, 2009.
DOI : 10.1016/0017-9310(94)90129-5

D. M. Roberge, B. Zimmermann, F. Rainone, M. Gottsponer, M. Eyholzer et al., Microreactor Technology and Continuous Processes in the Fine Chemical and Pharmaceutical Industry: Is the Revolution Underway?, Organic Process Research & Development, vol.12, issue.5, pp.905-910, 2008.
DOI : 10.1021/op8001273

C. Rosenfeld, C. Serra, C. Brochon, and G. Hadziioannou, Influence of micromixer characteristics on polydispersity index of block copolymers synthesized in continuous flow microreactors, Lab on a Chip, vol.38, issue.10, p.1682, 2008.
DOI : 10.1039/b803885f

URL : https://hal.archives-ouvertes.fr/hal-00385609

C. 'oseefeld, C. Odoohue, ". Hadziioaaou, and G. , Cotinuous Online Rapid Size Exclusion Chromatography Monitoring of Polymerizations -CORSEMP, Macromol. React. Eng, vol.1, pp.547-552

J. C. Santos, M. M. Reis, R. A. Machado, A. Bolzan, C. Sayer et al., Online Monitoring of Suspension Polymerization Reactions Using Raman Spectroscopy, Industrial & Engineering Chemistry Research, vol.43, issue.23, pp.7282-7289, 2004.
DOI : 10.1021/ie034278m

G. Schneider, Continuous mixing of fluids using motionless mixers, Chemical and Petroleum Engineering, vol.4, issue.No. 3, pp.361-370, 1995.
DOI : 10.1007/BF01150280

F. J. Schork, P. B. Deshpande, and K. W. Leffew, Control of polymerization reactors, 1993.
DOI : 10.1201/9781315140322

J. Schütz, Agitated thin-film reactors and tubular reactors with static mixers for a rapid exothermic multiple reaction, Chem. Eng. Sci, vol.43, 1975.

R. A. Scott and N. A. Peppas, Kinetic study of acrylic acid solution polymerization, AIChE Journal, vol.43, issue.1, pp.135-144, 1997.
DOI : 10.1002/aic.690430116

S. Shiraki and S. Nakano, Tubular polymerization reactor, and process for polymerization, p.383093, 1983.

T. Srinivas, S. Sivakumar, S. K. Gupta, and D. N. Saraf, Free radical polymerizations associated with the trommsdorff effect under semibatch reactor conditions. II: Experimental responses to step changes in temperature, Polymer Engineering & Science, vol.40, issue.3, pp.311-321, 1996.
DOI : 10.1002/pen.10418

A. Stankiewicz and J. Moulijn, Process intensification: Transforming chemical engineering, Chem. Eng. Prog, vol.96, pp.22-34, 2000.

A. Stankiewicz and J. A. Moulijn, Process Intensification, Industrial & Engineering Chemistry Research, vol.41, issue.8, pp.1920-1924, 2002.
DOI : 10.1021/ie011025p

A. I. Stankiewicz and J. A. Moulijn, Re-engineering the chemical processing plant process intensification. M. Dekker, 2004.

N. Tanaka, H. Kitano, and N. Ise, Raman spectroscopic study of hydrogen bonding in aqueous carboxylic acid solutions. 3. Polyacrylic acid, Macromolecules, vol.24, issue.10, pp.3017-3019, 1991.
DOI : 10.1021/ma00010a060

W. Tauscher, Static mixing and reaction technology, Chemical and Petroleum Engineering, vol.38, issue.No. 12, pp.224-237, 1996.
DOI : 10.1016/0017-9310(94)00351-U

R. K. Thakur, C. Vial, K. D. Nigam, E. B. Nauman, and G. Djelveh, Static Mixers in the Process Industries???A Review, Chemical Engineering Research and Design, vol.81, issue.7, pp.787-826, 2003.
DOI : 10.1205/026387603322302968

D. Thoenes, Chemical reactor development: from laboratory synthesis to industrial ppoduutio, 1994.
DOI : 10.1007/978-94-015-8382-4

N. K. Tien, E. Flaschel, A. Renken, . Bulk, . Of et al., BULK POLYMERIZATION OF STYRENE IN A STATIC MIXER, Chemical Engineering Communications, vol.9, issue.2, pp.251-267, 1985.
DOI : 10.1002/aic.690210408

E. J. Troelstra, L. L. Dierendonck, L. Janssen, S. Maeder, and A. Renken, Radical addition polymerisation of acrylates in a Buss-Kneader, Chemical Engineering Science, vol.51, issue.10, pp.2479-2488, 1996.
DOI : 10.1016/0009-2509(96)00105-4

N. Tsukida, H. Muranaka, M. Ide, Y. Maeda, and H. Kitano, Effect of Neutralization of Poly(acrylic acid) on the Structure of Water Examined by Raman Spectroscopy, The Journal of Physical Chemistry B, vol.101, issue.34, pp.6676-6679, 1997.
DOI : 10.1021/jp971210+

T. J. Tulig and M. Tirrell, Molecular theory of the Trommsdorff effect, Macromolecules, vol.14, issue.5, pp.1501-1511, 1981.
DOI : 10.1021/ma50006a070

M. Vicevic, K. Novakovic, K. V. Boodhoo, and A. J. Morris, Kinetics of styrene free radical polymerisation in the spinning disc reactor, Chemical Engineering Journal, vol.135, issue.1-2, pp.78-82, 2008.
DOI : 10.1016/j.cej.2007.05.041

J. Villeeau, Gie de la aatio hiiue: oeptio et fotioeeeet des aateus

W. J. Walczak, D. A. Hoagland, and S. L. Hsu, Spectroscopic Evaluation of Models for Polyelectrolyte Chain Conformation in Dilute Solution, Macromolecules, vol.29, issue.23, pp.7514-7520, 1996.
DOI : 10.1021/ma951359o

J. P. Wallis, R. A. Ritter, and H. Andre, Continuous production of polystyrene in a tubular reactor: Part I, AIChE Journal, vol.21, issue.4, pp.686-691, 1975.
DOI : 10.1002/aic.690210407

S. Wong, M. Ward, and C. Wharton, Micro T-mixer as a rapid mixing micromixer, Sensors and Actuators B: Chemical, vol.100, issue.3, pp.359-379, 2004.
DOI : 10.1016/j.snb.2004.02.008

J. M. Zalc, E. S. Szalai, and F. J. Muzzio, Mixing dynamics in the SMX static mixer as a function of injection location and flow ratio, Polymer Engineering & Science, vol.55, issue.4, pp.875-890, 2003.
DOI : 10.1002/pen.10072

S. X. Zhang and W. H. Ray, Modeling of imperfect mixing and its effects on polymer properties, AIChE Journal, vol.43, issue.5, pp.1265-1277, 1997.
DOI : 10.1002/aic.690430515