P. Résultats-du, 3 ), p.100

L. Effet-de, ´ epaisseur de l'extrémité de l'enture sur la résistance mécanique en traction longitudinale du bois abouté [54, p.29

J. Types-de, A : joint horizontal ; B : joint vertical [26, p.30

.. Effet-du-module-d, ´ elasticité sur la performance mécanique des poutres DUO avec aboutage (Cas 1) [55], p.98

.. Géométrie-de-l-'enture-multiple, L : longueur ; P : pas ; b t : ´ epaisseur de l'extrémité (la géométrie testée : L=22 ; P=6 ; b t =1), p.99

.. Schéma-d-'un-plan-composite, A) extérieur pour deux variables, (B) Presque orthogonalité pour 3 variables, (C)Iso variance par rotation, p.109

. Géométrie-de-l-]....., enture : (a) Avant optimisation ; (b) Après optimisation, p.115

N. B. Norme, Bois de Structure-Bois massif reconstitué (BMR) Editée et diffusée par l'Association Française de Normalisation (AFNOR), pp.52-62, 2006.

C. Faye, Bois massif reconstitué : une voie de valorisation pour le douglas et le sapin-´ epicéa en usage structurel, 2012.

D. Bourreau, Y. Aimene, J. Beauchêne, and B. Thibaut, Herstellbarkeit von Brettschichtholztr??gern aus tropischem Laubholz, European Journal of Wood and Wood Products, vol.62, issue.1???2, pp.653-662, 2013.
DOI : 10.1111/1467-9868.00240

V. D. Tran, M. Oudjene, and P. J. Méausoone, FE analysis and geometrical optimization of timber beech finger-joint under bending test, International Journal of Adhesion and Adhesives, vol.52, pp.40-47, 2014.
DOI : 10.1016/j.ijadhadh.2014.03.007

URL : https://hal.archives-ouvertes.fr/hal-01597081

N. Norme and . En, Structure en bois, Bois de structure et bois lamellé-collé. Détermination de certaines propriétés physiques et mécanique. Editée et diffusée par l'Association Française de Normalisation, 2010.

N. Norme and . En, Bois de structure, Classes de résistance. Editée et diffusée par l'Association Française de Normalisation, 2009.

N. Norme and . En, Adhésifs pour structures portantes en bois, Méthode d'essai, partie 1 : Détermination de la résistance du joint au cisaillement en traction longitudinale, Editée et diffusée par l'Association Française de Normalisation (AFNOR), pp.302-303, 2004.

N. Norme and . En, Adhésifs pour structures portantes en bois, Méthode d'essai, partie 3 : Détermination de l'influence de l'attaque d'acide des fibres de bois, résultant de traitement cycliques de température et d'humidité sur la résistancè a la traction transversale, Editée et diffusée par l'Association Française de Normalisation (AFNOR), pp.302-305, 2004.

. Norme, Timber Structures-glued laminated timber and glued solid timber-requirements

«. Fao, Situation des forêts du monde, 2011.

C. Faye, « Valorisation en usage structural des essences de bois français douglas et du sapin, epicéa au travers du développement du bois massif reconstitué BMR », rap. tech., Institut Technologique FCBA, 2010.

«. Revue, . Forêt, and . Entreprise, n?152, produire des plaquettesforestì eres -animaux, 2003.

J. Sell and F. Kropf, Propriétés et caractéristiques des essences de bois, 1990.

. Norme, Eurocode 5-Design of timber structures-Part 1-1 : General-common rules and rules for buildings, 2008.

M. L. Selbo, Adhesive bonding of wood, pp.49-55, 1975.

C. and «. Bois-lamellé-collés, BLC) ; bois massifs reconstitués (BMR) », Assemblages Bois et dérivés Conception système, pp.1-4, 2007.

G. Dill-langer and S. Aicher, Glulam Composed of Glued Laminated Veneer Lumber Made of Beech Wood: Superior Performance in Compression Loading, Materials and Joints in Timber Structures. RILEM, vol.9, pp.603-613, 2014.
DOI : 10.1007/978-94-007-7811-5_55

S. Ormarsson, O. Dahlblom, and H. Petersson, A numerical study of the shape stability of sawn timber subjected to moisture variation Part 1: Theory, Wood Science and Technology, vol.32, issue.5, pp.325-334, 1998.
DOI : 10.1007/978-3-642-87928-9

M. Moutee, Modélisation du Comportement mécanique du bois au cours du séchage, Thèse doctorat, 2006.

N. Norme and . En, AboutagesàAboutagesà entures multiples dans les bois de construction, Exigences de performance et exigences minimales de fabrication, Editée et diffusée par l'Association Française de Normalisation (AFNOR), 2002.

N. Norme and . En, Adhésifs de nature phénolique et aminoplaste, pour structures portantes en bois-Classification et exigences de performance. Editée et diffusée par l'Association Française de Normalisation (AFNOR), 2011.

D. O. Chans, J. E. Cimadevilla, and E. M. Gutiérrez, Glued joints in hardwood timber, Glued joints in hardwood timber, pp.457-463, 2008.
DOI : 10.1016/j.ijadhadh.2008.04.008

G. Davis, The performance of adhesive systems for structural timbers, International Journal of Adhesion and Adhesives, vol.17, issue.3, pp.247-255, 1997.
DOI : 10.1016/S0143-7496(97)00010-9

J. D. Leeuw and J. Leufeuvre, « Recommandations relatives au choix des collesàcollesà froid destinées ` a la fabrication des charpentes, 1964.

H. B. Manbeck, J. J. Janowiak, P. R. Blankenhorn, P. Labosky, R. C. Moody et al., « Efficient hardwood glued-laminated beams, International Wood Engineering Conference, pp.283-290, 1996.

J. L. Coffin, J. Guiscafre, and C. Sales, « Etude de la pression de serrage et de son influence sur les paramètres de collage dans la fabrication d'´ eléments reconstitués en bois tropicaux », Centre Technique Forestier Tropical : Nogent-sur-Marne, p.32, 1981.

J. Guiscafre and C. Sales, Etude de l'aptitude au collage du bois d'azobé (lophita alata) ` a partir de résine résorcine-formaldhéyde », Centre Technique Forestier Tropical : Nogent-sur-Marne, p.23, 1980.

A. Pizzi, D. Rossouw, and W. E. Knuffel, Singmin, « " honeymoon " phenolic and tanninbased fast setting adhesive systems for exterior grade fingerjoints, Holzforschung Holzverwertung, vol.32, issue.6, pp.140-152, 1980.

D. Gornik, R. Hemingway, and V. Tisler, Tannin-based cold-setting adhesives for face lamination of wood, Holz als Roh-und Werkstoff, pp.23-30, 2000.
DOI : 10.1007/s001070050380

A. Pizzi, ???Honeymoon??? schnellabbindende Kleber f??r die Schichtholz-Verleimung, Holz als Roh-und Werkstoff, pp.61-63, 1983.
DOI : 10.1007/BF02612234

V. D. Tran, M. Oudjene, P. J. Méausoone, A. Pizzi, M. Gautier et al., « Experimental study of multi-layered beams made of beech timber glued with different adhesives, World Conference on Timber Engineering (WCTE), 2014.

D. B. Richards and F. E. Goodrick, « Tensile strength of scarf joints in southern pine, 1959.

K. Morkved and . Production, Production, Marketing and Use of Finger-Jointed Sawnwood: An Overview, Proceedings of Production, Marketing and use of finger-jointed sawnwood, 1982.
DOI : 10.1007/978-94-015-3859-6_2

J. G. Sunley, The Structural Use of Finger-Jointing, Proceedings of Production, Marketing and use of finger-jointed sawnwood, 1980.
DOI : 10.1007/978-94-015-3859-6_8

E. Raknes, The Influence of Production Conditions on the Strength of Finger-Joints, Proceedings of Production, Marketing and use of finger-jointed sawnwood, 1982.
DOI : 10.1007/978-94-015-3859-6_17

M. L. Selbo, Effect of joint geometry on tensile strength of finger joints, Forest Products Journal, vol.13, issue.9, pp.390-400, 1963.

V. D. Tran, M. Oudjene, and P. J. Méausoone, Experimental and numerical analyses of the structural response of adhesively reconstituted beech timber beams, Composite Structures, pp.206-217, 2015.
DOI : 10.1016/j.compstruct.2014.08.013

URL : https://hal.archives-ouvertes.fr/hal-01598428

M. D. Strickler, « Finger-jointed dimension lumber-past, present and future, Forest Products Journal, vol.30, issue.9, pp.51-56, 1980.

B. A. Cecilia, Optimisation du procédé d'aboutage par entures multiples du bois d'´ epinette noire

P. R. Fisette and W. W. Rice, « An analysis of structural finger-joints made from two northeastern species, Forest Products Journal, vol.39, issue.9, pp.40-44, 1988.

J. Ayarkwa, Y. Hirashima, and Y. Sasaki, Effect of finger geometry and end pressure on the flexural properties of finger-jointed tropical african hardwoods, Forest Products Journal, vol.5012, issue.11, pp.53-63, 2000.

T. Sellers, J. R. Mcsween, and W. T. Nearn, « Gluing of eastern hardwoods : A review, general technical report SO-71, p.30, 1988.

C. Dagenais, Aboutage de l'´ erablè a sucre pour la fabrication de produits de bois d'ingénie structuraux, Thèse doctorat Thèse de doctorat, 2007.

J. E. Reeb, J. J. Karchesy, J. R. Foster, and R. L. , Krahmer, « Finger-joint quality after 4,6 and 32 hours of knife wear : Preliminary results, Forest Products Journal, vol.48, issue.7, p.33, 1998.

H. Kolb, Tests on the bending strength and fire tests with glulam-girders of beech veneers, Holz als Roh- und Werkstoff, vol.25, issue.8, pp.277-283, 1968.
DOI : 10.1007/BF02619688

M. Frese and H. J. Blaß, Characteristic bending strength of beech glulam, Materials and Structures, vol.42, issue.1, pp.3-13, 2006.
DOI : 10.1617/s11527-006-9117-9

S. Aicher and D. Ohnesorge, Schubfestigkeit von Brettschichtholz aus??europ??ischem Buchenholz, European Journal of Wood and Wood Products, vol.44, issue.1, pp.143-154, 2011.
DOI : 10.1051/forest:2005105

S. Aicher and L. , Höfflin, « Delamination properties and shear strength of glued beech wood laminations with red heartwood, Holz. Roh. Werkst, vol.64, pp.125-136, 2007.

F. Colling, Tragfähigkeit von Biegeträgern aus Brettschichtholz in Abhängigkeit von den festigkeitsrelevanten Einflussgrößen, Thèse doctorat, 1990.

S. Aicher and W. Klöck, « Finger joint analysis and optimization by elastic, nonlinear and fracture mechanics fnite element computations, Proceedings 1991 International Timber Engineering Conference, 1991.

H. R. Milner and E. Yeoh, Finite Element Analysis of Glued Timber Finger Joints, Journal of Structural Engineering, vol.117, issue.3, pp.755-766, 1991.
DOI : 10.1061/(ASCE)0733-9445(1991)117:3(755)

H. Wernersson, Fracture characterization of wood adhesive joints, Thèse doctorat, 1994.

E. Serrano, Finger-joint for laminated beams. Experimental and numerical studies of mechanical behaviour, Thèse doctorat, 1997.
DOI : 10.1061/(asce)0733-9445(2001)127:8(914)

E. Serrano and P. J. Gustafsson, Influence of bondline brittleness and defects on the strength of timber finger-joints, International Journal of Adhesion and Adhesives, vol.19, issue.1, pp.9-17, 1999.
DOI : 10.1016/S0143-7496(98)00048-7

M. Schmidt and A. Thönniben, « Relevant wood characteristics for gluind beech and ash with regard to discoloration », Eur, J. Wood Prod, issue.70, pp.319-325, 2012.

C. Frazier and J. Ni, « On the occurence of network interpenetration in the wood-isocyanate adhesive interphase, Int. J. Adhes. Adhes, issue.18, pp.81-87, 1998.

M. Sernek and J. Resnik, « Penetration of a liquid urea-formaldehyde adhesive into beech wood. », Wood Fiber Sci, pp.41-48, 1999.

C. Buckley and C. Phanopoulos, Examination of the penetration of polymeric methylene diphenyl-di-isocyanate (pmdi) into wood structure using chemical state state x-ray microscopy. », Holzforschung, pp.215-222, 2002.

W. Gindl and E. Dessipri, « Using UV microscopy to study diffusion of melamine-ureaformaldehyde resin in cell walls of spruce wood. », Holzforschung, pp.103-107, 2002.

M. J. Smith and H. Dai, Wood???thermoplastic adhesive interface???method of characterization and results, International Journal of Adhesion and Adhesives, vol.22, issue.3, pp.197-204, 2002.
DOI : 10.1016/S0143-7496(01)00055-0

B. M. Collett, A review of surface and interfacial adhesion in wood science and related fields, Wood Science and Technology, vol.8, issue.1, pp.1-42, 1972.
DOI : 10.1021/ba-1968-0087.ch001

W. C. Wake, Adhesion and formulation of adhesives Applied Science Publishers, 2 subédsubéd, 1982.

A. Pizzi and F. A. Cameron, « Fast-set adhesives for glulam, Forest Products Journal, vol.34, issue.9, pp.61-68, 1984.

N. Norme and . B51, Bois-Détermination de l'humidité. Editée et diffusée par l'Association Française de Normalisation, 2010.

D. Bourreau, Etude de faisabilité de lamellé-collé endémique en Guyane Française, Thèse doctorat, 2011.

N. Norme and . En, Bois de structure, Détermination des valeurs caractéristiques des propriétés mécaniques et de la masse volumique. Editée et diffusée par l'Association Française de Normalisation, 2010.

N. Norme and . B52, R` egles d'utilisation du bois dans la construction Classement visuel pour l'emploi en structures des bois sciés français résineux et feuillus, Partie 2 : Méthode alternative pour le bois massif entrant dans la fabrication de bois lamellé collé BLC et de bois massif reconstitué BMR, Editée et diffusée par l'Association Française de Normalisation (AFNOR), 2011.

C. Kollmann, Principles of wood sciences and technology, 1985.

J. M. Dinwoodie, Timber : Its nature and behaviour, 2000.
DOI : 10.4324/9780203477878

P. Niemz, Physik des Holzes und der Holzwerkstoffe, 1993.

F. Mirianon, S. Fortino, and T. Toratti, A method to model wood by using ABAQUS finite element software. Part 1 : Constitutive model and computational details, 2008.

A. Reiterer and S. E. , Compressive behaviour of softwood under uniaxial loading at different orientations to the grain, Mechanics of Materials, vol.33, issue.12, pp.705-715, 2001.
DOI : 10.1016/S0167-6636(01)00086-2

M. Bariska and L. J. Kucera, On the fracture morphology in wood, Wood Science and Technology, vol.65, issue.1, pp.19-34, 1985.
DOI : 10.1007/BF00354750

J. Bodig, « Stress-strain relationship for wood in transverse compression, J Mater, vol.1, issue.3, pp.645-666, 1966.

M. Gong and I. Smith, « Failure of softwood under static compression parallel to grain, J. Inst. Wood. Sci, vol.15, issue.4, pp.204-225, 2000.

U. Muller, Effects of wood macro-and micro-structure on selected mechanical properties, Thèse doctorat, University of Natural Resources and Applied Life Sciences, 2003.

I. Smith and S. Vasic, Fracture behaviour of softwood, Mechanics of Materials, vol.35, issue.8, pp.803-815, 2003.
DOI : 10.1016/S0167-6636(02)00208-9

T. Tabarsa and Y. Chui, Stress strain response of wood under radial compression. part I : Test method and influences of cellular properties, Wood Fiber Sci, vol.33, issue.2, pp.223-232, 2001.

R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, 1948.
DOI : 10.1098/rspa.1948.0045

C. O. Loinsigh, M. Oudjene, E. Shotton, and A. , Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels, Composite Structures, vol.94, issue.2, pp.313-321, 2012.
DOI : 10.1016/j.compstruct.2011.08.029

M. Oudjene and M. Khelifa, Finite element modelling of wooden structures at large deformations and brittle failure prediction, Materials & Design, vol.30, issue.10, pp.4081-4087, 2009.
DOI : 10.1016/j.matdes.2009.05.024

A. M. Dias, J. W. Van-de-kuilen, S. Lopes, and H. Cruz, A non-linear 3D FEM model to simulate timber???concrete joints, Advances in Engineering Software, pp.522-530, 2007.
DOI : 10.1016/j.advengsoft.2006.08.024

D. M. Moses and H. G. , Stress and failure analysis of wood composites: a new model, Composites Part B: Engineering, vol.35, issue.3, pp.251-261, 2004.
DOI : 10.1016/j.compositesb.2003.10.002

M. Bickerdicke and P. Quenneville, « Predicting the row shear failure mode in parallel-to-grain bolted connections, 9th World Conference of Timber Engineering, 2006.

M. Patton-mallory, S. M. Cramer, F. W. Smith, and P. J. Pellicane, Nonlinear Material Models for Analysis of Bolted Wood Connections, Journal of Structural Engineering, vol.123, issue.8, pp.1063-70, 1997.
DOI : 10.1061/(ASCE)0733-9445(1997)123:8(1063)

P. Mackenzie-helnwein, H. W. Müllner, J. Eberhardsteiner, and H. A. Mang, Analysis of layered wooden shells using an orthotropic elasto-plastic model for multi-axial loading of clear spruce wood, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.21-24, pp.2661-85, 2005.
DOI : 10.1016/j.cma.2004.07.051

L. Benabou, Finite strain analysis of wood species under compressive failure due to kinking, International Journal of Solids and Structures, vol.49, issue.3-4, pp.408-419, 2012.
DOI : 10.1016/j.ijsolstr.2011.09.024

J. Schmidt and M. Kaliske, Models for numerical failure analysis of wooden structures, Engineering Structures, vol.31, issue.2, pp.571-579, 2009.
DOI : 10.1016/j.engstruct.2008.11.001

P. Mackenzie-helnwein, J. Eberhardsteiner, and H. A. Mang, A multi-surface plasticity model for clear wood and its application to the finite element analysis of structural details, Computational Mechanics, vol.31, issue.1-2, pp.204-218, 2003.
DOI : 10.1007/s00466-003-0423-6

T. H. Nguyen, Modèle d'endommagement des assemblages collés : identification et application ` a la description d'un essai de vieillissement accéléré, Thèse doctorat, Ecole Nationale des Ponts et Chaussées, 2008.

G. R. Irwin, Analysis of stresses and strains near the end of crack transversing a plate, Journal of Applied Mechanics, vol.24, pp.361-364, 1957.

A. A. Griffith, The phenomenon of rupture and flow in solids, Philosophical Transactions of the Royal Society, vol.221, 1920.

P. P. Camanho and C. G. Davila, « Mixed-mode decohesion finite elements for the simulation of delamination in composite materials, pp.1-37, 2002.

M. L. Benzeggagh and M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites Science and Technology, vol.56, issue.4, pp.439-449, 1996.
DOI : 10.1016/0266-3538(96)00005-X

T. Andersson and A. Biel, On the effective constitutive properties of a thin adhesive layer loaded in peel, International Journal of Fracture, vol.47, issue.1-2, pp.227-273, 2006.
DOI : 10.1115/1.3601206

Q. D. Yang, M. D. Thouless, and S. M. Ward, Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation, Journal of the Mechanics and Physics of Solids, vol.47, issue.6, pp.1337-53, 1999.
DOI : 10.1016/S0022-5096(98)00101-X

J. P. Gonçalves, M. F. De-moura, and A. G. Magalhaes, Application of interface finite elements to three-dimensional progressive failure analysis of adhesive joints, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.32, issue.5
DOI : 10.1177/002199839803201401

D. Guitard, Mécanique du matériau bois et composites, Cepadues-Editions, 1987.

S. Fortino, « A simple approach for FEM simulation of mode I cohesive crack growth in glued laminated timber under short-term loading, Journal of Structural Mechanics, vol.45, issue.1, pp.1-20, 2012.

M. F. De-moura, Mixed-mode (I+II) fracture characterization of wood bonded joints, Construction and Building Materials, pp.1956-1962, 2011.
DOI : 10.1016/j.conbuildmat.2010.11.060

H. Yoshihara and A. Satoh, Shear and crack tip deformation correction for the double cantilever beam and three-point end-notched flexure specimens for mode I and mode II fracture toughness measurement of wood, Engineering Fracture Mechanics, vol.76, issue.3, pp.335-346, 2009.
DOI : 10.1016/j.engfracmech.2008.10.012

H. Yoshihara and T. Kawamura, Mode I fracture toughness estimation of wood by DCB test, Composites Part A: Applied Science and Manufacturing, vol.37, issue.11, pp.2105-2113, 2006.
DOI : 10.1016/j.compositesa.2005.12.001

J. Sjodin, Steel-to-timber dowel joints-influence of moisture induced stresses, 2008.

A. Jacques, Pratique industrielle de la méthode Taguchi : les plans d'expériences. AFNOR, 1995.

V. Hamel, J. M. Roelandt, J. N. Gacel, and F. Schmit, Finite element modeling of clinch forming with automatic remeshing, Computers & Structures, vol.77, issue.2, pp.185-200, 2000.
DOI : 10.1016/S0045-7949(99)00207-2

M. Oudjene and L. , Ben-Ayed, « On the parametrical study of clinch joining of metallic sheets using the taguchi method », Engineering Structures, pp.1782-1788, 2008.

V. Hamel, ContributionàContributionà l'´ etude de l'assemblage par clinchage : Aspects numériques et expérimentaux, Thèse doctorat, 1998.

P. Vijian and V. P. Arunachalam, Optimization of squeeze cast parameters of LM6 aluminium alloy for surface roughness using Taguchi method, Journal of Materials Processing Technology, vol.180, issue.1-3, pp.161-167, 2006.
DOI : 10.1016/j.jmatprotec.2006.05.016

H. Naceur, ContributionàContributionà l'optimisation de forme de structures minces en présence de non linéarités géométriques et materielles, Thèse doctorat, 1998.

L. A. Schmit, « Structural design by systematic synthesis, Proc. of the Second ASCE Conference on Electronic Computation, pp.105-122, 1960.

O. C. Zienkiewicz and J. S. Campbell, « Shape optimization and sequential linear programming », Optimum structural design, pp.109-126, 1973.

J. A. Bennette and M. E. Botkin, Structural shape optimization with geometric description and adaptive mesh refinement, AIAA Journal, vol.3, issue.3, pp.458-464, 1985.
DOI : 10.2514/3.61405

M. Domaszewski and E. M. , Optimal shakedown design of frames by linear programming, Computers & Structures, vol.21, issue.3, pp.379-385, 1985.
DOI : 10.1016/0045-7949(85)90114-2

R. H. Myers and D. C. Montgomery, Response surface methodology, Process and product optimization using designed experiments. USA : Wileyinterscience publication, secondédsecondéd, 2002.

J. Sienz, S. J. Bates, and J. F. Pittman, Flow restrictor design for extrusion slit dies for a range of materials: Simulation and comparison of optimization techniques, Finite Elements in Analysis and Design, vol.42, issue.5, pp.430-453, 2006.
DOI : 10.1016/j.finel.2005.06.008

M. H. Bonté, A. H. Van-den-boogaard, and J. Huétink, « Metamodelling techniques for the optimisation of metal forming processes, Proceedings of ESAFORM, pp.155-158, 2005.

R. Bahloul, S. B. Eléchi, P. D. Santo, and A. Potiron, « Optimisation of l-bending process : a comparison between response surface, moving least squares and evolution strategies methods, Proceedings of APOMAT, pp.120-131, 2005.

G. E. Fasshauer, Toward approximate moving least squares approximation with irregularly spaced centers, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.12-14, pp.1231-1243, 2004.
DOI : 10.1016/j.cma.2003.12.017

J. Goupy, Plans d'expérience pour surface de réponse, 1999.

J. Lee and P. Hajela, Application of classifier systems in improving response surface based approximations for design optimization, Computers and Structures, pp.333-344, 2001.
DOI : 10.1016/S0045-7949(00)00132-2

D. C. Montgomery, Design and analysis of experiments, 2005.

H. Naceur, S. B. Elechi, C. Knopf-lenoir, and J. L. Batoz, Response Surface Methodology for the Design of Sheet Metal Forming Parameters to Control Springback Effects using the Inverse Approach, AIP Conference Proceedings, pp.1991-1996, 2004.
DOI : 10.1063/1.1766826

L. Ben-ayed, A. Delamézì-ere, J. Batoz, and C. Knopf-lenoir, Optimization of the blankholder force distribution with application to the stamping of a car front door panel (numisheet'99), 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, NUMISHEET'05, pp.15-19, 2005.

M. Oudjene, L. Ben-ayed, A. Delamézì-ere, and J. L. Batoz, « Shape optimization of clinching tools using the response surface methodology with moving least-square approximation », journal of materials processing technology, pp.289-296, 2009.

M. Oudjene, L. Ben-ayed, and J. L. Batoz, Geometrical Optimization Of Clinch Forming Process Using The Response Surface Method, AIP Conference Proceedings, pp.531-536, 2007.
DOI : 10.1063/1.2740865

N. Lebaal, M. Oudjene, and S. Roth, The optimal design of sheet metal forming processes: application to the clinching of thin sheets, International Journal of Computer Applications in Technology, vol.43, issue.2, pp.110-116, 2012.
DOI : 10.1504/IJCAT.2012.046041

H. Naceur, S. Shiri, D. Coutellier, and J. L. Batoz, « On the modeling and design of composite multilayered structures using solid-shell finite element model », Finite Elements in Analysis and Design, pp.70-71, 2013.

N. Lebaal, F. Schmidt, and S. Puissant, Rheological parameters identification using in situ experimental data of a flat die extrusion, Journal of Materials Processing Technology, vol.164, issue.165, pp.1524-1529, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.218

URL : https://hal.archives-ouvertes.fr/hal-01716286

N. Lebaal, M. Oudjene, and S. Roth, The optimal design of sheet metal forming processes: application to the clinching of thin sheets, International Journal of Computer Applications in Technology, vol.43, issue.2, pp.110-116, 2012.
DOI : 10.1504/IJCAT.2012.046041

N. Lebaal, F. Schmidt, and S. Puissant, Design and optimization of three dimensional extrusion dies, using constraint optimization algorithm », Finite Elements in Analysis and Design, pp.333-340, 2009.

H. Li, Q. X. Wang, and K. Y. Lam, « Development of a novel meshless local kriging (lokringing) méthod for structural dynamic analysis, Structural Safety, pp.133-151, 2005.