R. Brecha, Ten Reasons to Take Peak Oil Seriously, Sustainability, vol.22, issue.2, pp.664-694, 2013.
DOI : 10.3390/su1030516

A. Pizzi, Advanced Wood Adhesives Technology, New York, 1994.

A. Pizzi and H. O. Scharfetter, The chemistry and development of tannin-based adhesives for exterior plywood, Journal of Applied Polymer Science, vol.22, issue.6, pp.1745-1761, 1978.
DOI : 10.1002/app.1978.070220623

E. Haslam, Plant polyphenols: vegetable tannins revisited, 1989.

L. Jurd, The hydrolysable tannins, " in Wood extractives and their significance to the pulp and paper industries, pp.229-260, 1962.

E. Kulvik, Chestnut wood tannin extract in plywood adhesives, Adhes. Age, vol.19, issue.3, pp.19-21, 1976.

E. Kulvik, Chestnut wood tannin extract as a cure accelerator for phenol-formaldehyde wood adhesives, Adhes. Age, vol.20, issue.3, pp.33-34, 1977.

S. E. Drewes and D. G. Roux, Condensed tannins. 15. Interrelationships of flavonoid components in wattle-bark extract, Biochemical Journal, vol.87, issue.1, pp.167-172, 1963.
DOI : 10.1042/bj0870167

D. G. Roux and . Paulus, spp, Biochemical Journal, vol.78, issue.4, pp.785-789, 1961.
DOI : 10.1042/bj0780785

L. J. Porter, The flavonoids, 1988.

A. Pizzi and A. Stephanou, A 13C NMR study of polyflavonoid tannin adhesive intermediates. I. Noncolloidal performance determining rearrangements, Journal of Applied Polymer Science, vol.51, issue.13, pp.2109-2124, 1994.
DOI : 10.1002/app.1994.070511302

A. Pizzi and A. Stephanou, A 13C NMR study of polyflavonoid tannin adhesive intermediates. II. Colloidal state reactions, Journal of Applied Polymer Science, vol.51, issue.13, pp.2125-2130, 1994.
DOI : 10.1002/app.1994.070511303

D. Thompson and A. Pizzi, Simple 13C-NMR methods for quantitative determinations of polyflavonoid tannin characteristics, Journal of Applied Polymer Science, vol.55, issue.1, pp.107-112, 1995.
DOI : 10.1002/app.1995.070550111

D. G. Roux, D. Ferreira, H. K. Hundt, and E. Malan, Structure stereochemistry and reactivity of natural condensed tannins as basis for their extended industrial application, Appl Polym Symp, vol.28, issue.1, pp.335-353, 1975.

D. G. Roux, Recent advances in the chemistry and chemical utilization of the natural condensed tannins, Phytochemistry, vol.11, issue.4, pp.1219-1230, 1972.
DOI : 10.1016/S0031-9422(00)90068-2

A. Pizzi, Tannin-Based Adhesives, Journal of Macromolecular Science, Part C, vol.28, issue.7, pp.247-315, 1980.
DOI : 10.1002/app.1979.070230631

URL : https://hal.archives-ouvertes.fr/hal-01599534

N. Meikleham, A. Pizzi, and A. Stephanou, Induced accelerated autocondensation of polyflavonoid tannins for phenolic polycondensates. I. 13C-NMR, 29Si-NMR, X-ray, and polarimetry studies and mechanism, Journal of Applied Polymer Science, vol.54, issue.12, pp.1827-1845, 1994.
DOI : 10.1002/app.1994.070541206

A. Pizzi, N. Meikleham, and A. Stephanou, Induced accelerated autocondensation of polyflavonoid tannins for phenolic polycondensates. II. Cellulose effect and application, Journal of Applied Polymer Science, vol.55, issue.6, pp.929-933, 1995.
DOI : 10.1002/app.1995.070550611

A. Pizzi and N. Meikleham, Induced accelerated autocondensation of polyflavonoid tannins for phenolic polycondensates. III. CP-MAS 13C-NMR of different tannins and models, Journal of Applied Polymer Science, vol.55, issue.8, pp.1265-1269, 1995.
DOI : 10.1002/app.1995.070550812

A. Merlin and A. Pizzi, An ESR study of the silica-induced autocondensation of polyflavonoid tannins, Journal of Applied Polymer Science, vol.59, issue.6, pp.945-952, 1996.
DOI : 10.1002/(SICI)1097-4628(19960207)59:6<945::AID-APP6>3.0.CO;2-P

E. Masson, A. Merlin, and A. Pizzi, Comparative kinetics of induced radical autocondensation of polyflavonoid tannins. I. Modified and nonmodified tannins, Journal of Applied Polymer Science, vol.60, issue.2
DOI : 10.1002/(SICI)1097-4628(19960411)60:2<263::AID-APP14>3.0.CO;2-6

E. Masson, A. Pizzi, and A. Merlin, Comparative kinetics of the induced radical autocondensation of polyflavonoid tannins. III. Micellar reactions vs. cellulose surface catalysis, Journal of Applied Polymer Science, vol.60, issue.10, pp.1655-1664, 1996.
DOI : 10.1002/(SICI)1097-4628(19960606)60:10<1655::AID-APP18>3.0.CO;2-3

E. Masson, A. Pizzi, and M. Merlin, Comparative kinetics of the induced radical autocondensation of polyflavonoid tannins. II. Flavonoid units effects, Journal of Applied Polymer Science, vol.64, issue.2, pp.243-265, 1997.
DOI : 10.1002/(SICI)1097-4628(19970411)64:2<243::AID-APP5>3.0.CO;2-R

R. Garcia and A. Pizzi, Polycondensation and autocondensation networks in polyflavonoid tannins. I. Final networks, Journal of Applied Polymer Science, vol.70, issue.6, pp.1083-1091, 1998.
DOI : 10.1002/(SICI)1097-4628(19981107)70:6<1083::AID-APP5>3.0.CO;2-K

R. Garcia and A. Pizzi, Polycondensation and autocondensation networks in polyflavonoid tannins. II. Polycondensation versus autocondensation, Journal of Applied Polymer Science, vol.70, issue.6, pp.1093-1109, 1998.
DOI : 10.1002/(SICI)1097-4628(19981107)70:6<1093::AID-APP6>3.0.CO;2-J

S. Yin, X. Deglise, and D. Masson, Thermomechanical Analysis of Wood/Aminoplastic Adhesives Joints Cross-Linking - UF, MUF, PMUF, Holzforschung, vol.75, issue.1, pp.575-580, 1995.
DOI : 10.1163/156856190X00522

K. Hofmann and W. G. Glasser, Cure monitoring of an epoxy-amine system by dynamic mechanical thermal analysis (DMTA), Thermochimica Acta, vol.166, pp.169-184, 1990.
DOI : 10.1016/0040-6031(90)80179-3

R. B. Seymour and C. E. Carraher, Polymer chemistry, an introduction, Dekker, 1992.

A. Zalacain, M. Carmona, C. Lorenzo, I. Blazquez, and G. L. Alonso, Antiradical efficiency of different vegetable tannin extracts, Am. Leather Chem. Assoc, vol.97, issue.4, pp.137-142, 2002.

M. Noferi, E. Masson, A. Merlin, A. Pizzi, and X. Deglise, Antioxidant characteristics of hydrolysable and polyflavonoid tannins: An ESR kinetics study, Journal of Applied Polymer Science, vol.63, issue.4, pp.475-482, 1997.
DOI : 10.1002/(SICI)1097-4628(19970124)63:4<475::AID-APP9>3.0.CO;2-O

V. Cheynier, J. Souquet, E. Le-roux, S. Guyot, and J. Rigaud, [15] Size separation of condensed tannins by normal-phase high-performance liquid chromatography, Methods in Enzymology, pp.178-184, 1999.
DOI : 10.1016/S0076-6879(99)99018-3

E. Cadahía, E. Conde, M. C. García-vallejo, and B. F. De-simón, Gel permeation chromatographic study of the molecular weight distribution of tannins in the wood, bark and leaves ofEucalyptus spp., Chromatographia, vol.49, issue.1-2, pp.95-100, 1996.
DOI : 10.1007/978-1-4684-7511-1_20

C. S. Ku and S. P. Mun, Characterization of proanthocyanidin in hot water extract isolated from Pinus radiata bark, Wood Science and Technology, vol.44, issue.3, pp.235-247, 2007.
DOI : 10.1007/978-3-662-05046-0

D. Muralidharan, Spectrophotometric analysis of catechins and condensed tannins using Ehrlich's reagent, Soc. Leather Technol. Chem, vol.81, issue.6, pp.231-233, 1997.

K. Nakagawa and M. Sugita, Spectroscopic characterisation and molecular weight of vegetable tannins, Soc. Leather Technol. Chem. A, vol.83, issue.5, pp.261-264, 1999.

L. R. Schimleck and Y. Yazaki, Analysis of Pinus radiata D. Don Bark by Near Infrared Spectroscopy, Holzforschung, vol.58, issue.5, 2003.
DOI : 10.1007/BF02621420

J. Soukupova, B. N. Rock, and J. Albrechtova, Spectral characteristics of lignin and soluble phenolics in the near infrared- a comparative study, International Journal of Remote Sensing, vol.16, issue.15, pp.3039-3055, 2002.
DOI : 10.1016/S0261-2194(98)00009-X

H. Pasch, A. Pizzi, and K. Rode, MALDI???TOF mass spectrometry of polyflavonoid tannins, Polymer, vol.42, issue.18, pp.7531-7539, 2001.
DOI : 10.1016/S0032-3861(01)00216-6

H. Mclean and J. Gardner, Bark extracts in adhesives, JAF Pulp Pap. Mag Can, vol.53, issue.9, pp.111-114, 1952.

G. Tondi, Developpement de résines de polycondensation à base de tanins pour produits industriels écologiques et innovants ? Mousses rigides et produits de préservation bois, 2009.

Z. Osman and A. Pizzi, Comparison of gelling reaction effectiveness of procyanidin tannins for wood adhesives, Holz als Roh- und Werkstoff, vol.60, issue.5, pp.328-328, 2002.
DOI : 10.1007/s00107-002-0289-x

E. Roffael, B. Dix, and J. Okum, Use of spruce tannin as a binder in particleboards and medium density fiberboards (MDF), Holz als Roh- und Werkstoff, vol.58, issue.5, pp.301-305, 2000.
DOI : 10.1007/s001070050432

A. Pizzi, Chemistry and technology of cold-and thermosetting tannin-based exterior wood adhesives, 1977.

A. Pizzi and D. G. Roux, Resorcinol/wattle flavonoids condensates for cold-setting adhesives, Journal of Applied Polymer Science, vol.22, issue.9, pp.2717-2718, 1978.
DOI : 10.1002/app.1978.070220929

W. E. Hillis and G. Urbach, Reaction of polyphenols with formaldehyde, Journal of Applied Chemistry, vol.14, issue.12, pp.665-673, 1959.
DOI : 10.1042/bj0670239

A. Pizzi, Tannin-based wood adhesive, Advanced wood adhesive technology, M. Dekker, pp.149-217, 1994.

A. Ballerini, A. Despres, and A. Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels, Holz als Roh- und Werkstoff, vol.59, issue.4, pp.477-478, 2005.
DOI : 10.1007/s00107-005-0048-x

D. Du and T. Rossouw, Reaction kinetics of phenols and tannin with aldehydes, 1979.

F. Pichelin, C. Kamoun, and A. Pizzi, Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives, Holz als Roh- und Werkstoff, vol.57, issue.5, pp.305-317, 1999.
DOI : 10.1007/s001070050349

H. M. Saayman, Leather Industries, Res.Bull, 1971.

A. Pizzi and P. Tekely, Mechanism of polyphenolic tannin resin hardening by hexamethylenetetramine: CP???MAS 13C-NMR, Journal of Applied Polymer Science, vol.56, issue.12, pp.1645-1650, 1995.
DOI : 10.1002/app.1995.070561215

A. Pizzi and P. Tekely, C NMR Study, Holzforschung, vol.52, issue.3, pp.277-281, 1996.
DOI : 10.1021/ma50006a076

F. Pichelin, M. Nakatani, A. Pizzi, S. Wieland, A. Despres et al., Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00187312

C. Kamoun, A. Pizzi, and M. Zanetti, Upgrading melamine-urea-formaldehyde polycondensation resins with buffering additives. I. The effect of hexamine sulfate and its limits, Journal of Applied Polymer Science, vol.46, issue.1, pp.203-214, 2003.
DOI : 10.1007/s001070050428

C. Kamoun and A. Pizzi, Mechanism of hexamine as a nonaldehyde polycondensation hardener, Part 1, Holzforsch. Holzverwert, vol.52, issue.1, pp.16-19, 2000.

C. Kamoun and A. Pizzi, Mechanism of hexamine as a nonaldehyde polycondensation hardener, Part 2: Recomposition of intermediate reactive compound, Holzforsch. Holzverwert, vol.52, issue.3, pp.66-67, 2000.

A. Pizzi, Phenolic and tannin adhesives for panel products, Contributions to Wood Adhesives Research, pp.13-30, 1999.

C. Peña, K. Caba, A. Retegi, C. Ocando, J. Labidi et al., Mimosa and chestnut tannin extracts reacted with hexamine in solution, Journal of Thermal Analysis and Calorimetry, vol.32, issue.2, pp.515-521, 2009.
DOI : 10.1002/pol.1982.170200205

P. J. Navarrete and . Fuentes, Adhésifs naturels à base de tannin, tannin/lignine et lignine/gluten pour la fabrication de panneaux de bois, Thèse de doctorat en Sciences du bois et des fibres, 2011.

H. Lei, Résines à base de matériaux naturels et synthétiques destinées aux adhésifs pour le bois, Thèse de doctorat en Sciences du Bois, 2009.

S. Wieland, Utilisation d " adhésifs respectueux de l " environnement pour la fabrication de panneaux dérivés du bois à faible émission de formaldéhyde : caractérisation des paramètres de pressage : évaluation des propriétés des panneaux, Thèse de doctorat en Sciences et Technologies Industrielles, 2007.

L. Long, The Ozonization Reaction., Chemical Reviews, vol.27, issue.3, pp.437-493, 1940.
DOI : 10.1021/cr60088a001

C. Harries, Verfahren zur Darstellung von Aldehyden und Ketonen, 1918.

R. Kadesch, Ozonolysis of fatty acids and their derivatives, Progress in the Chemistry of Fats and other Lipids, vol.6, pp.291-312, 1963.
DOI : 10.1016/0079-6832(63)90026-0

P. S. Bailey, The Reactions Of Ozone With Organic Compounds, Chemical Reviews, vol.58, issue.5, pp.925-1010, 1958.
DOI : 10.1021/cr50023a005

C. E. Schiaffo and P. H. Dussault, Ozonolysis in Solvent/Water Mixtures: Direct Conversion of Alkenes to Aldehydes and Ketones, The Journal of Organic Chemistry, vol.73, issue.12, pp.4688-4690, 2008.
DOI : 10.1021/jo800323x

T. S. Omonov, E. Kharraz, and J. M. Curtis, Ozonolysis of Canola Oil: A Study of Product Yields and Ozonolysis Kinetics in Different Solvent Systems, Journal of the American Oil Chemists' Society, vol.48, issue.5, pp.689-705, 2010.
DOI : 10.1139/v70-508

E. H. Pryde, D. E. Anders, H. M. Teeter, and J. C. Cowan, Ozonization of soybean oil. The preparation and some properties of aldehyde oils, Journal of the American Oil Chemists' Society, vol.10, issue.7, pp.375-379, 1961.
DOI : 10.1007/BF02633584

E. H. Pryde, D. E. Anders, H. M. Teeter, and J. C. Cowan, Unsaturated aldehyde oils by the partial ozonization of soybean oil, Journal of the American Oil Chemists' Society, vol.27, issue.9, pp.497-499, 1963.
DOI : 10.1021/jo01056a015

R. A. Awl and E. H. Pryde, Reduction of methyl oleate ozonolysis products to aldehydes with activated zinc, Journal of the American Oil Chemists' Society, vol.42, issue.1, pp.35-37, 1966.
DOI : 10.1021/jo01074a036

I. Zanardi, V. Travagli, A. Gabbrielli, L. Chiasserini, and V. Bocci, Physico-Chemical Characterization of Sesame Oil Derivatives, Lipids, vol.8, issue.574, pp.877-886, 2008.
DOI : 10.1007/s11745-008-3218-x

A. Sega, I. Zanardi, L. Chiasserini, A. Gabbrielli, V. Bocci et al., Properties of sesame oil by detailed 1H and 13C NMR assignments before and after ozonation and their correlation with iodine value, peroxide value, and viscosity measurements, Chemistry and Physics of Lipids, vol.163, issue.2, pp.148-156, 2010.
DOI : 10.1016/j.chemphyslip.2009.10.010

D. Graiver, P. Tran, L. Patrick, K. Farminer, and R. Narayan, Modifications of Soybean Oil Using Novel Ozone-Based Chemistry, Degradable Polymers and Materials, pp.76-100, 2006.

P. Tran, D. Graiver, and R. Narayan, Ozone-mediated polyol synthesis from soybean oil, Journal of the American Oil Chemists' Society, vol.58, issue.9, pp.653-659, 2005.
DOI : 10.1021/ba-1968-0077.ch064

G. Martinez-tellez, O. L. Lozano, and M. F. Gómez, Measurement of Peroxidic Species in Ozonized Sunflower Oil, Ozone: Science & Engineering, vol.56, issue.3, pp.181-185, 2006.
DOI : 10.1046/j.1365-2672.2001.01235.x

M. J. Black, C. S. Fitchett, M. L. Khan, and J. Tomkinson, Clivage Oxydant d " Huiles Insaturées et Produits Obtenus à partir de celles-ci, p.1198443, 2002.

N. U. Soriano, V. P. Migo, and M. Matsumura, Ozonation of sunflower oil: Spectroscopic monitoring of the degree of unsaturation, Journal of the American Oil Chemists' Society, vol.42, issue.10, pp.997-1001, 2003.
DOI : 10.1016/S0032-3861(99)00417-6

M. F. Díaz, J. A. Gavín-sazatornil, O. Ledea, F. Hernández, M. Alaiz et al., Spectroscopic Characterization of Ozonated Sunflower Oil, Ozone: Science & Engineering, vol.29, issue.3, pp.247-253, 2005.
DOI : 10.1007/BF02540753

T. Thornberry and J. P. Abbatt, Heterogeneous reaction of ozone with liquid unsaturated fatty acids: detailed kinetics and gas-phase product studies, Physical Chemistry Chemical Physics, vol.6, issue.1, pp.84-93, 2004.
DOI : 10.1039/b310149e

J. J. Pappas, W. P. Keaveney, E. Gancher, and M. Berger, A new and convenient method for converting olefins to aldehydes, Tetrahedron Letters, vol.7, issue.36, pp.4273-4278, 1966.
DOI : 10.1016/S0040-4039(00)76049-7

D. J. Last, J. J. Nájera, R. Wamsley, G. Hilton, M. Mcgillen et al., Ozonolysis of organic compounds and mixtures in solution. Part I: Oleic, maleic, nonanoic and benzoic acids, Physical Chemistry Chemical Physics, vol.37, issue.9, pp.1427-1440, 2009.
DOI : 10.1039/b815425b

D. Gupta, Thiourea, A convenient reagent for the reductive cleavage of olefin ozonolysis products, Tetrahedron, vol.38, issue.20, pp.3013-3018, 1982.
DOI : 10.1016/0040-4020(82)80187-7

C. Schwartz, J. Raible, K. Mott, and P. H. Dussault, ???Reductive ozonolysis??? via a new fragmentation of carbonyl oxides, Tetrahedron, vol.62, issue.46, pp.10747-10752, 2006.
DOI : 10.1016/j.tet.2006.08.092

C. Schwartz, J. Raible, K. Mott, and P. H. Dussault, -Oxides:??? An Improved Approach to Alkene Ozonolysis, Organic Letters, vol.8, issue.15, pp.3199-3201, 2006.
DOI : 10.1021/ol061001k

M. Dunky, T. Pizzi, and M. Van-leemput, State-ot-the-art report : COST Action E13 wood adhesion and glued products, 2003.

A. Pizzi, Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues, Journal of Adhesion Science and Technology, vol.19, issue.1, pp.829-846, 2006.
DOI : 10.1163/156856105774429037

B. Guezguez, Compréhension des phénomènes de diffusion du formaldéhyde dans les panneaux à base de bois: utilisation dans la réduction des émissions industrielles et domestiques de composés organiques volatils, Thèse de doctorat en Sciences des Matériaux, 2011.

L. Ping, N. Brosse, L. Chrusciel, P. Navarrete, and A. Pizzi, Extraction of condensed tannins from grape pomace for use as wood adhesives, Industrial Crops and Products, vol.33, issue.1, pp.253-257, 2011.
DOI : 10.1016/j.indcrop.2010.10.007

H. R. Mansouri, P. Navarrete, A. Pizzi, S. Tapin-lingua, B. Benjelloun-mlayah et al., Kunstharzfreie Klebstoffe f??r Holzwerkstoffe aus niedermolekularem Lignin und Tannin, European Journal of Wood and Wood Products, vol.74, issue.2, pp.221-229, 2010.
DOI : 10.1002/(SICI)1097-4628(19991010)74:2<359::AID-APP18>3.0.CO;2-A

S. Garnier, A. Pizzi, O. C. Vorster, and L. Halasz, Rheology of polyflavonoid tannin-formaldehyde reactions before and after gelling. II. Hardener influence and comparison of different tannins, Journal of Applied Polymer Science, vol.81, issue.4, pp.864-871, 2002.
DOI : 10.1002/app.1776

L. Fertier, H. Koleilat, M. Stemmelen, O. Giani, C. Joly-duhamel et al., The use of renewable feedstock in UV-curable materials ??? A new age for polymers and green chemistry, Progress in Polymer Science, vol.38, issue.6, pp.932-962, 2013.
DOI : 10.1016/j.progpolymsci.2012.12.002

URL : https://hal.archives-ouvertes.fr/hal-00820481

F. Seniha-güner, Y. Ya?c?, and A. T. Erciyes, Polymers from triglyceride oils, Progress in Polymer Science, vol.31, issue.7, pp.633-670, 2006.
DOI : 10.1016/j.progpolymsci.2006.07.001

A. Behr and J. P. Gomes, The refinement of renewable resources: New important derivatives of fatty acids and glycerol, European Journal of Lipid Science and Technology, vol.48, issue.103, pp.31-50, 2010.
DOI : 10.1016/j.cep.2009.03.005

M. A. Meier, J. O. Metzger, and U. S. Schubert, Plant oil renewable resources as green alternatives in polymer science, Chemical Society Reviews, vol.26, issue.2, p.1788, 2007.
DOI : 10.1016/j.matdes.2004.08.008

J. Sadowska, B. Johansson, E. Johannessen, R. Friman, L. Broniarz-press et al., Characterization of ozonated vegetable oils by spectroscopic and chromatographic methods, Chemistry and Physics of Lipids, vol.151, issue.2, pp.85-91, 2008.
DOI : 10.1016/j.chemphyslip.2007.10.004

M. Ollé, Analyse des corps gras, 2002.

J. I. Gray, Measurement of lipid oxidation: A review, Journal of the American Oil Chemists' Society, vol.46, issue.6, pp.539-546, 1978.
DOI : 10.1111/j.1365-2621.1974.tb17974.x

M. Collomb and M. Spahni, Revue des méthodes de dosage des produits d`oxydation des lipides, principalement des lipides des produits laitiers, Schweiz. Milchwirtsch. Forsch, vol.25, pp.3-24, 1996.

A. S. Henick, M. F. Benca, and J. H. Mitchell, Estimating carbonyl compounds in rancid fats and foods, Journal of the American Oil Chemists' Society, vol.27, issue.3, pp.88-91, 1954.
DOI : 10.1007/BF02635080

M. Grenier-loustalot, Caractérisation des polymères par RMN, Techniques de l " Ingénieur, 1996.

H. R. Mansouri and A. Pizzi, Urea???formaldehyde???propionaldehyde physical gelation resins for improved swelling in water, Journal of Applied Polymer Science, vol.40, issue.6, pp.5131-5136, 2006.
DOI : 10.1002/app.24477

H. R. Mansouri, R. R. Thomas, S. Garnier, and A. Pizzi, Fluorinated polyether additives to improve the performance of urea???formaldehyde adhesives for wood panels, Journal of Applied Polymer Science, vol.19, issue.3, pp.1683-1688, 2007.
DOI : 10.1007/978-3-662-10207-7

A. Pizzi, Advanced Wood Adhesives Technology, New York, 1994.

A. Ballerini, A. Despres, and A. Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels, Holz als Roh- und Werkstoff, vol.59, issue.4, pp.477-478, 2005.
DOI : 10.1007/s00107-005-0048-x

M. Lokman-khan, J. Tomkinson, C. S. Fitchett, and M. J. Black, Oxidative cleavage of unsaturated oils and products obtained therefrom, 2004.

C. S. Fitchett, N. G. Laughton, C. G. Chappell, M. Lokman-khan, V. Tverezovskiy et al., Oil ozonolysis, 2003.

L. Badey, N. Lahitte, F. Flenet, and F. Bosque, French environmental communication on sunflower and rapeseed oils based on life cycle assessment, OCL, vol.20, issue.4, p.401, 2013.
DOI : 10.1007/s11367-011-0296-4

S. Vasile, L. Van-langenhove, and S. Meulemeester, Effect of Production Process Parameters on Different Properties of a Nonwoven Spacer Produced on a 3D Web Linker®, Fibres Text. East. Eur, vol.14, issue.458, pp.68-74, 2006.

M. A. Dweib, B. Hu, A. O. Donnell, H. W. Shenton, and R. P. , All natural composite sandwich beams for structural applications, Composite Structures, vol.63, issue.2, pp.147-157, 2004.
DOI : 10.1016/S0263-8223(03)00143-0

G. and L. Roy, Composite panel, apparatus and process for its manufacture, EP1686210 (B1), 06, 2013.

C. Lainé, Contribution à la modélisation du comportement mécanique de structures sandwichs 3D par homogénéisation périodique, 2013.

A. Sauget, Développement de matériaux composites fibreux hautes perfomances à matrice bio-sourcée

J. E. Taylor, The Structure of Singularities in Soap-Bubble-Like and Soap-Film-Like Minimal Surfaces, The Annals of Mathematics, vol.103, issue.3, p.489, 1976.
DOI : 10.2307/1970949

D. Weaire and R. Phelan, The physics of foam, Journal of Physics: Condensed Matter, vol.8, issue.47, pp.9519-9524, 1996.
DOI : 10.1088/0953-8984/8/47/055

J. Salager and L. Choplin, Mousses -Formation, formulation et propriétés, Techniques de l'Ingénieur, 2008.

X. Li, Mousses rigides et élastiques à base d'albumine -Ppréparation, caractérisation et modification

C. A. Cateto, M. F. Barreiro, C. Ottati, M. Lopretti, A. E. Rodrigues et al., Lignin-based rigid polyurethane foams with improved biodegradation, Journal of Cellular Plastics, vol.1, issue.1, pp.81-95, 2013.
DOI : 10.1016/j.reactfunctpolym.2011.05.007

H. Hatakeyama and T. Hatakeyama, Advances of Polyurethane Foams Derived from Lignin, Journal of Renewable Materials, vol.416, issue.2, pp.113-123, 2013.
DOI : 10.1016/j.tca.2002.12.002

H. Jeong, J. Park, S. Kim, J. Lee, and N. Ahn, Compressive viscoelastic properties of softwood kraft lignin-based flexible polyurethane foams, Fibers and Polymers, vol.14, issue.8, pp.1301-1310, 2013.
DOI : 10.1007/BF02645546

O. Faruk and M. Sain, Continuous Extrusion Foaming of Lignin Enhanced Thermoplastic Polyurethane (TPU), Journal of Biobased Materials and Bioenergy, vol.7, issue.3, pp.309-314, 2013.
DOI : 10.1166/jbmb.2013.1365

H. Hatakeyama, A. Hirogaki, H. Matsumura, and T. Hatakeyama, Glass transition temperature of polyurethane foams derived from lignin by controlled reaction rate, Journal of Thermal Analysis and Calorimetry, vol.416, issue.3, pp.1075-1082, 2013.
DOI : 10.1016/j.tca.2002.12.002

N. E. Meikleham and A. Pizzi, Acid- and alkali-catalyzed tannin-based rigid foams, Journal of Applied Polymer Science, vol.53, issue.11, pp.1547-1556, 1994.
DOI : 10.1002/app.1994.070531117

G. Tondi, A. Pizzi, H. Pasch, and A. Celzard, Structure degradation, conservation and rearrangement in the carbonisation of polyflavonoid tannin/furanic rigid foams ??? A MALDI-TOF investigation, Polymer Degradation and Stability, vol.93, issue.5, pp.968-975, 2008.
DOI : 10.1016/j.polymdegradstab.2008.01.024

G. Tondi, V. Fierro, A. Pizzi, and A. Celzard, Tannin-based carbon foams, Carbon, vol.47, issue.6, pp.1480-1492, 2009.
DOI : 10.1016/j.carbon.2009.01.041

G. Tondi, A. Pizzi, and R. Olives, NATURAL TANNIN-BASED RIGID FOAMS AS INSULATION FOR DOORS AND WALL PANELS, Maderas. Ciencia y tecnolog??a, vol.10, issue.3, 2008.
DOI : 10.4067/S0718-221X2008000300005

G. Tondi and A. Pizzi, Tannin-based rigid foams: Characterization and modification, Industrial Crops and Products, vol.29, issue.2-3, pp.356-363, 2009.
DOI : 10.1016/j.indcrop.2008.07.003

G. Tondi, W. Zhao, A. Pizzi, G. Du, V. Fierro et al., Tannin-based rigid foams: A survey of chemical and physical properties, Bioresource Technology, vol.100, issue.21, pp.5162-5169, 2009.
DOI : 10.1016/j.biortech.2009.05.055

A. Celzard, M. C. Basso, A. Pizzi, and V. Fierro, Mousses rigides à base de tanins de type procyanidine ou prodelphinidine et leur procede de preparation, pp.28-2013, 2013.

A. Celzard, W. Zhao, A. Pizzi, and V. Fierro, Mechanical properties of tannin-based rigid foams undergoing compression, Materials Science and Engineering: A, vol.527, issue.16-17, pp.16-17, 2010.
DOI : 10.1016/j.msea.2010.03.091

M. C. Basso, Green, Formaldehyde-free, Foams For Thermal Insulation, Advanced Materials Letters, vol.2, issue.6, pp.378-382, 2011.
DOI : 10.5185/amlett.2011.4254

M. C. Basso, S. Giovando, A. Pizzi, A. Celzard, and V. Fierro, Tannin/furanic foams without blowing agents and formaldehyde, Industrial Crops and Products, vol.49, pp.17-22, 2013.
DOI : 10.1016/j.indcrop.2013.04.043

URL : https://hal.archives-ouvertes.fr/hal-01295730

C. Lacoste, M. C. Basso, A. Pizzi, M. Laborie, D. Garcia et al., Bioresourced pine tannin/furanic foams with glyoxal and glutaraldehyde, Industrial Crops and Products, vol.45, pp.401-405, 2013.
DOI : 10.1016/j.indcrop.2012.12.032

URL : https://hal.archives-ouvertes.fr/hal-01296297

X. Li, M. Basso, V. Fierro, A. Pizzi, and A. Celzard, Chemical Modification of Tannin/Furanic Rigid Foams by Isocyanates and Polyurethanes, Maderas. Ciencia y tecnolog??a, vol.14, issue.ahead, pp.257-265, 2012.
DOI : 10.4067/S0718-221X2012005000001

X. Li, H. A. Essawy, A. Pizzi, L. Delmotte, K. Rode et al., Modification of tannin based rigid foams using oligomers of a hyperbranched poly(amine-ester), Journal of Polymer Research, vol.100, issue.12, 2012.
DOI : 10.1016/j.biortech.2009.05.055

URL : https://hal.archives-ouvertes.fr/hal-01296312

A. Celzard, V. Fierro, G. Amaral-labat, A. Pizzi, and J. Torero, Flammability assessment of tannin-based cellular materials, Polymer Degradation and Stability, vol.96, issue.4, pp.477-482, 2011.
DOI : 10.1016/j.polymdegradstab.2011.01.014

G. Tondi, Developpement de résines de polycondensation à base de tanins pour produits industriels écologiques et innovants ? Mousses rigides et produits de préservation bois, 2009.

R. Narayan, Polymeric Materials from Agricultural Feedstocks, Polymers from Agricultural Coproducts, pp.2-28, 1994.
DOI : 10.1021/bk-1994-0575.ch001

G. Lay, D. J. Lentz, J. Rehm, J. Sachetto, J. Silbiger et al., Polymer compositions containing destructurized starch -Google Brevets, 1992.

C. Bastioli, V. Bellotti, L. Del-giudice, G. Del-tredici, R. Lombi et al., Articles biodégradables à base d'amidon et leur procédé de production, p.9010671, 1990.

B. Ko?íková, A. Gregorová, A. Osvald, and J. Kraj?ovi?ová, Role of lignin filler in stabilization of natural rubber???based composites, Journal of Applied Polymer Science, vol.24, issue.2, pp.1226-1231, 2007.
DOI : 10.5254/1.3544710

I. ?imkovic, What could be greener than composites made from polysaccharides?, Carbohydrate Polymers, vol.74, issue.4, pp.759-762, 2008.
DOI : 10.1016/j.carbpol.2008.07.009

S. Antonsson, G. Henriksson, M. Johansson, and M. E. Lindström, Low Mw-lignin fractions together with vegetable oils as available oligomers for novel paper-coating applications as hydrophobic barrier, Industrial Crops and Products, vol.27, issue.1, pp.98-103, 2008.
DOI : 10.1016/j.indcrop.2007.08.006

C. Lacoste, A. Pizzi, M. Basso, M. Laborie, and A. Celzard, Pinus pinaster tannin/furanic foams: PART I. Formulation, Industrial Crops and Products, vol.52, pp.450-456, 2014.
DOI : 10.1016/j.indcrop.2013.10.044

URL : https://hal.archives-ouvertes.fr/hal-01295576

C. Lacoste, M. C. Basso, A. Pizzi, M. Laborie, A. Celzard et al., Pine tannin-based rigid foams: Mechanical and thermal properties, Industrial Crops and Products, vol.43, pp.245-250, 2013.
DOI : 10.1016/j.indcrop.2012.07.039

URL : https://hal.archives-ouvertes.fr/hal-01296306

A. Gandini, Furans in polymer chemistry, Progress in Polymer Science, vol.22, issue.6, pp.1203-1379, 1997.
DOI : 10.1016/S0079-6700(97)00004-X

R. Aguilar, J. Ramí-rez, G. Garrote, and M. Vázquez, Kinetic study of the acid hydrolysis of sugar cane bagasse, Journal of Food Engineering, vol.55, issue.4, pp.309-318, 2002.
DOI : 10.1016/S0260-8774(02)00106-1

B. M. Nagaraja, V. Siva-kumar, V. Shasikala, A. H. Padmasri, B. Sreedhar et al., A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol, Catalysis Communications, vol.4, issue.6, pp.287-293, 2003.
DOI : 10.1016/S1566-7367(03)00060-8

P. Carey and M. Lott, Sand binder systems part V -Furan no-bake, Foundry Manag. Technol, vol.123, issue.17, pp.26-30, 1995.

L. Y. Foo and R. W. Hemingway, Condensed Tannins: Reactions of Model Compounds with Furfuryl Alcohol and Furfuraldehyde, Journal of Wood Chemistry and Technology, vol.3, issue.4, pp.135-158, 1985.
DOI : 10.1080/02773818308085173

A. Nicollin, Développement de matériaux composites écologiques à base de résines de tannins et de renforts de fibres végétales

X. Li, A. Pizzi, C. Lacoste, V. Fierro, and A. Celzard, Physical Properties of Tannin/Furanic Resin Foamed With Different Blowing Agents, BioResources, vol.8, issue.1, pp.743-742, 2013.
DOI : 10.15376/biores.8.1.743-752

URL : https://hal.archives-ouvertes.fr/hal-01296301

A. Celzard, V. Fierro, G. Amaral-labat, A. Pizzi, and J. Torero, Flammability assessment of tannin-based cellular materials, Polymer Degradation and Stability, vol.96, issue.4, pp.477-482, 2011.
DOI : 10.1016/j.polymdegradstab.2011.01.014

X. Li, M. C. Basso, F. L. Braghiroli, V. Fierro, A. Pizzi et al., Tailoring the structure of cellular vitreous carbon foams, Carbon, vol.50, issue.5, pp.2026-2036, 2012.
DOI : 10.1016/j.carbon.2012.01.004

X. Li, A. Pizzi, M. Cangemi, V. Fierro, and A. Celzard, Flexible natural tannin-based and protein-based biosourced foams, Industrial Crops and Products, vol.37, issue.1, pp.389-393, 2012.
DOI : 10.1016/j.indcrop.2011.12.037

J. Bikard, Fabrication des mousses en polyuréthane, 2009.

R. Bouayad, J. Bikard, and J. Agassant, Compressible flow in a plate/plate rheometer: application to the experimental determination of reactive expansion???s models parameters for polyurethane foam, International Journal of Material Forming, vol.21, issue.5, pp.243-260, 2009.
DOI : 10.5254/1.3540362

A. Pizzi, Extended durability by the chemical fixation of unsaturated alkyd surface finishes to wood, Holzforsch. Holzverwert, vol.42, issue.6, pp.107-109, 1990.

M. C. Basso, S. Giovando, A. Pizzi, H. Pasch, N. Pretorius et al., Flexible-elastic copolymerized polyurethane-tannin foams, Journal of Applied Polymer Science, vol.96, issue.21, p.224, 2014.
DOI : 10.1016/j.polymdegradstab.2011.01.014

URL : https://hal.archives-ouvertes.fr/hal-01295582

M. C. Basso, A. Pizzi, and A. Celzard, Dynamic Foaming Behaviour of Polyurethane vs Tannin/Furanic Foams, Journal of Renewable Materials, vol.96, issue.12, pp.1-6, 2013.
DOI : 10.1016/j.polymdegradstab.2011.01.014

URL : https://hal.archives-ouvertes.fr/hal-01295731

J. Berthier, Polyuréthanes -PUR, 2009.

J. Vandeputte, Le glyc??rol ????building blocks???? majeur de la bioraffinerie ol??agineuse, Ol??agineux, Corps gras, Lipides, vol.19, issue.1, pp.16-21, 2012.
DOI : 10.1051/ocl.2012.0435

URL : https://doi.org/10.1051/ocl.2012.0435

C. Hammond, J. A. Lopez-sanchez, M. Hasbi-ab-rahim, N. Dimitratos, R. L. Jenkins et al., Synthesis of glycerol carbonate from glycerol and urea with gold-based catalysts, Dalton Transactions, vol.44, issue.103, p.3927, 2011.
DOI : 10.1002/anie.200500382

P. Tundo and M. Selva, The Chemistry of Dimethyl Carbonate, Accounts of Chemical Research, vol.35, issue.9, pp.706-716, 2002.
DOI : 10.1021/ar010076f

M. Firdaus and M. A. Meier, Renewable polyamides and polyurethanes derived from limonene, Green Chem., vol.13, issue.20, p.370, 2013.
DOI : 10.1007/BF00262125

H. Blattmann, M. Fleischer, M. Bähr, and R. Mülhaupt, Isocyanate- and Phosgene-Free Routes to Polyfunctional Cyclic Carbonates and Green Polyurethanes by Fixation of Carbon Dioxide, Macromolecular Rapid Communications, vol.84, issue.14, pp.1238-1254, 2014.
DOI : 10.1002/1521-3900(200209)187:1<325::AID-MASY325>3.0.CO;2-L

G. Rokicki and A. Piotrowska, A new route to polyurethanes from ethylene carbonate, diamines and diols, Polymer, vol.43, issue.10, pp.2927-2935, 2002.
DOI : 10.1016/S0032-3861(02)00071-X

M. O. Sonnati, S. Amigoni, E. P. Taffin-de-givenchy, T. Darmanin, O. Choulet et al., Glycerol carbonate as a versatile building block for tomorrow: synthesis, reactivity, properties and applications, Green Chem., vol.13, issue.434, p.283, 2013.
DOI : 10.1039/C0GC00686F

URL : https://hal.archives-ouvertes.fr/hal-00844159

H. Engels, H. Pirkl, R. Albers, R. W. Albach, J. Krause et al., Polyurethanes: Versatile Materials and Sustainable Problem Solvers for Today???s Challenges, Angewandte Chemie International Edition, vol.2, issue.12, pp.9422-9441, 2013.
DOI : 10.1007/978-3-642-59978-1_2

G. Illuminati, U. Romano, and R. Tesei, Process for the preparation of aromatic carbonates, p.8, 1980.

X. Zhou, X. Ge, R. Tang, T. Chen, and G. Wang, Preparation and catalytic property of modified multi-walled carbon nanotube-supported TiO2 for the transesterification of dimethyl carbonate with phenol, Chinese Journal of Catalysis, vol.35, issue.4, pp.481-489, 2014.
DOI : 10.1016/S1872-2067(14)60010-3

P. Cao, X. Yang, C. Tang, J. Yang, J. Yao et al., Molybdenum Trioxide Catalyst for Transesterification of Dimethyl Carbonate and Phenyl Acetate to Diphenyl Carbonate, Chinese Journal of Catalysis, vol.30, issue.9, pp.853-855, 2009.
DOI : 10.1016/S1872-2067(08)60127-8

Z. Fu and Y. Ono, Synthesis of methyl N-phenyl carbamate by methoxycarbonylation of aniline with dimethyl carbonate using Pb compounds as catalysts, Journal of Molecular Catalysis, vol.91, issue.3, pp.399-405, 1994.
DOI : 10.1016/0304-5102(94)00038-7

A. Pizzi, H. Pasch, K. Rode, and S. Giovando, Polymer structure of commercial hydrolyzable tannins by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry, Journal of Applied Polymer Science, vol.44, issue.6, pp.3847-3859, 2009.
DOI : 10.1248/cpb.44.1293

N. Radebe, K. Rode, A. Pizzi, S. Giovando, and H. Pasch, MALDI-TOF-CID for the microstructure elucidation of polymeric hydrolysable tannins, Journal of Applied Polymer Science, vol.18, issue.1, pp.97-107, 2013.
DOI : 10.1002/rcm.1350

URL : https://hal.archives-ouvertes.fr/hal-01593770

S. Giovando, A. Pizzi, H. Pasch, and N. Pretorius, Structure and oligomers distribution of commercial Tara (Caesalpina spinosa) hydrolysable tannin, Ligno, pp.22-31, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01596680

H. Deka and N. Karak, Bio-based hyperbranched polyurethane/clay nanocomposites: adhesive, mechanical, and thermal properties, Polymers for Advanced Technologies, vol.43, issue.250, pp.973-980, 2011.
DOI : 10.1016/S0032-3861(02)00229-X

A. Patel, C. Patel, M. G. Patel, M. Patel, and A. Dighe, Fatty acid modified polyurethane dispersion for surface coatings: Effect of fatty acid content and ionic content, Progress in Organic Coatings, vol.67, issue.3, pp.255-263, 2010.
DOI : 10.1016/j.porgcoat.2009.11.006

F. Braghiroli, V. Fierro, A. Pizzi, K. Rode, W. Radke et al., Reaction of condensed tannins with ammonia, Industrial Crops and Products, vol.44, pp.330-335, 2013.
DOI : 10.1016/j.indcrop.2012.11.024

URL : https://hal.archives-ouvertes.fr/hal-01296299

M. Dunky, T. Pizzi, and M. Van-leemput, European Cooperation in Scientific and Technical Research., COST Action E13 (Project)., and European Commission. Research Directorate-General., State-ot-the-art report : COST Action E13 wood adhesion and glued products, 2002.

]. U. Biermann, U. Bornscheuer, M. A. Meier, J. O. Metzger, and H. J. Schäfer, Oils and Fats as Renewable Raw Materials in Chemistry, Oils and Fats as Renewable Raw Materials in Chemistry, pp.3854-3871, 2011.
DOI : 10.1002/ejlt.200900130

]. E. Pryde, D. E. Anders, H. M. Teeter, and J. C. Cowan, Ozonization of soybean oil

]. R. Ackman, M. E. Retson, L. R. Gallay, and F. A. Vandenheuvel, OZONOLYSIS OF UNSATURATED FATTY ACIDS: I. OZONOLYSIS OF OLEIC ACID, Canadian Journal of Chemistry, vol.9, issue.10, pp.1956-1963, 1961.
DOI : 10.1002/lipi.19600621202

]. L. Long, The Ozonization Reaction., Chemical Reviews, vol.27, issue.3, pp.437-493, 1940.
DOI : 10.1021/cr60088a001

]. J. Pappas, W. P. Keaveney, E. Gancher, and M. Berger, A new and convenient method for converting olefins to aldehydes, Tetrahedron Letters, vol.7, issue.36, pp.4273-4278, 1966.
DOI : 10.1016/S0040-4039(00)76049-7

E. H. Pryde, D. E. Anders, H. M. Teeter, and J. C. Cowan, The Ozonation of Methyl

]. D. Gupta and T. , Thiourea, A convenient reagent for the reductive cleavage of olefin ozonolysis products, Tetrahedron, vol.38, issue.20, pp.38-3013, 1982.
DOI : 10.1016/0040-4020(82)80187-7

M. Lokman-khan, J. Tomkinson, C. S. Fitchett, and M. J. Black, Oxidative cleavage of unsaturated oils and products obtained therefrom, US Patent 676802927 assigned to Cambridge Biopolymers Limited, 2004.

]. B. Guezguez, Compréhension des phénomènes de diffusion du formaldéhyde dans les panneaux à base de bois: utilisation dans la réduction des émissions industrielles et domestiques de composés organiques volatils, Thèse de doctorat en Sciences des Matériaux, pp.113-121

]. A. Pizzi, Condensed tannins for adhesives, Industrial & Engineering Chemistry Product Research and Development, vol.21, issue.3, pp.359-369, 1982.
DOI : 10.1021/i300007a005

A. Pizzi and K. L. , Mittal: Handbook of adhesive technology, revised and expanded, pp.574-585, 2003.

S. Pasch and . Rigolet, Synthetic-resin-free wood panel adhesives from mixed low molecular mass lignin and tannin, Eur, J. Wood Wood Prod, vol.69, issue.2, pp.221-229, 2010.

J. I. Gray, Measurement of lipid oxidation: A review, Journal of the American Oil Chemists' Society, vol.46, issue.6, pp.539-546, 1978.
DOI : 10.1111/j.1365-2621.1974.tb17974.x

M. Spahni, Revue des méthodes de dosage des produits d`oxydation des lipides, principalement des lipides des produits laitiers, Schweiz. Milchwirtsch. Forsch, vol.25, pp.3-24, 1996.

]. A. Henick, M. F. Benca, and J. H. Mitchell, Estimating carbonyl compounds in rancid fats and foods, Journal of the American Oil Chemists' Society, vol.27, issue.3, pp.88-91, 1954.
DOI : 10.1007/BF02635080

M. F. Díaz, J. A. Gavín-sazatornil, O. Ledea, F. Hernández, M. Alaiz et al., Spectroscopic Characterization of Ozonated Sunflower Oil, Ozone: Science & Engineering, vol.29, issue.3, pp.247-253, 2005.
DOI : 10.1007/BF02540753

]. A. Sega, I. Zanardi, L. Chiasserini, A. Gabbrielli, V. Bocci et al., Properties of sesame oil by detailed 1H and 13C NMR assignments before and after ozonation and their correlation with iodine value, peroxide value, and viscosity measurements, Chemistry and Physics of Lipids, vol.163, issue.2, pp.148-156, 2010.
DOI : 10.1016/j.chemphyslip.2009.10.010

]. A. Ballerini, A. Despres, and A. Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels, Holz Als Roh-Werkst, pp.477-478, 2005.

P. Tomkinson and . Fowler, Oil ozonolysis, US Patent, A1 assigned to Cambridge Biopolymers Limited, 2003.

R. Faruk, O. Sain, and M. , Continuous Extrusion Foaming of Lignin Enhanced Thermoplastic Polyurethane (TPU), Journal of Biobased Materials and Bioenergy, vol.7, issue.3, pp.309-314, 2013.
DOI : 10.1166/jbmb.2013.1365

J. Ge and K. Sakai, Compressive Properties and Biodegradabilities of Polyurethane Foams Derived from Condensed Tannins, Mokusai Gakkaishi, vol.39, issue.7, pp.801-806, 1993.

J. Ge and K. Sakai, Decomposition of polyurethane foams derived from condensed tannin II: Hydrolysis and aminolysis of polyurethane foams, Journal of Wood Science, vol.49, issue.2, pp.103-105, 1998.
DOI : 10.2115/fiber.49.9_500

J. Ge, X. Shi, M. Cai, R. Wu, and M. Wang, A novel biodegradable antimicrobial PU foam from wattle tannin, Journal of Applied Polymer Science, vol.33, issue.10, pp.90-2756, 2003.
DOI : 10.1016/0032-3861(92)90787-W

S. Giovando, A. Pizzi, H. Pasch, and N. Pretorius, Structure and oligomers distribution of commercial Tara (Caesalpina spinosa) hydrolysable tannin, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01596680

H. Hatakeyama and T. Hatakeyama, Advances of Polyurethane Foams Derived from Lignin, Journal of Renewable Materials, vol.416, issue.2, pp.113-123, 2013.
DOI : 10.1016/j.tca.2002.12.002

J. Liu, H. Liu, L. Deng, B. Liao, and Q. Guo, Improving aging resistance and mechanical properties of waterborne polyurethanes modified by lignin amines, Journal of Applied Polymer Science, vol.31, issue.3, 2013.
DOI : 10.1016/j.matdes.2010.04.023

N. E. Meikleham and A. Pizzi, Acid- and alkali-catalyzed tannin-based rigid foams, Journal of Applied Polymer Science, vol.53, issue.11, 1994.
DOI : 10.1002/app.1994.070531117

M. Noferi, E. Masson, A. Merlin, A. Pizzi, and X. Deglise, Antioxidant characteristics of hydrolysable and polyflavonoid tannins: An ESR kinetics study, Journal of Applied Polymer Science, vol.63, issue.4, 1997.
DOI : 10.1002/(SICI)1097-4628(19970124)63:4<475::AID-APP9>3.0.CO;2-O

B. Nohra, L. Candy, J. Blanco, C. Guerin, Y. Raoul et al., From Petrochemical Polyurethanes to Biobased Polyhydroxyurethanes, Macromolecules, vol.46, issue.10, pp.3771-3792, 2013.
DOI : 10.1021/ma400197c

H. Pasch and A. Pizzi, Considerations on the macromolecular structure of chestnut ellagitannins by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry, Journal of Applied Polymer Science, vol.44, issue.2, pp.429-437, 2002.
DOI : 10.1248/cpb.44.1293

Y. Peng, Z. Zheng, P. Sun, X. Wang, and T. Zhang, Synthesis and characterization of polyphenol-based polyurethane, New Journal of Chemistry, vol.100, issue.3, pp.729-734, 2013.
DOI : 10.1021/ja00485a018

A. Pizzi, Wood adhesive chemistry and technology, Marcel Dekker, vol.1, 1983.

A. Pizzi, Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues, Journal of Adhesion Science and Technology, vol.19, issue.1, pp.829-846, 2006.
DOI : 10.1163/156856105774429037

A. Pizzi, H. Pasch, K. Rode, and S. Giovando, Polymer structure of commercial hydrolyzable tannins by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry, Journal of Applied Polymer Science, vol.44, issue.6, pp.3847-3859, 2009.
DOI : 10.1248/cpb.44.1293

A. Pizzi and H. O. Scharfetter, The chemistry and development of tannin-based adhesives for exterior plywood, Journal of Applied Polymer Science, vol.22, issue.6, pp.1745-1761, 1978.
DOI : 10.1002/app.1978.070220623

N. Radebe, K. Rode, A. Pizzi, S. Giovando, and H. Pasch, MALDI-TOF-CID for the microstructure elucidation of polymeric hydrolysable tannins, Journal of Applied Polymer Science, vol.18, issue.1, pp.97-107, 2013.
DOI : 10.1002/rcm.1350

URL : https://hal.archives-ouvertes.fr/hal-01593770

G. Rokicki and . A. Piotrowska, A new route to polyurethanes from ethylene carbonate, diamines and diols, Polymer, vol.43, issue.10, pp.2927-2935, 2002.
DOI : 10.1016/S0032-3861(02)00071-X

. Fig, MALDI-TOF spectra of tannin polyurethane mixtures prepared at ambient temperature, range 260Da to 650Da. (a) Mimosa; (b) Quebracho; (c) Radiata Pine; (d) Maritime Pine

Z. Peng, P. Zheng, X. Sun, T. Wang, ]. J. Zhang et al., Synthesis and characterization of polyphenol-based polyurethane A novel biodegradable antimicrobial PU foam from wattle tannin Decomposition of polyurethane foams derived from condensed tannin II: Hydrolysis and aminolysis of polyurethane foams, New J. Chem. J. Appl. Polym. Sci. J. Wood Sci, vol.37, issue.44 2, pp.729-734, 1998.

A. Pizzi, Tannin-based polyurethane adhesives, Polyurethane Foams Derived from Condensed Tannins, pp.801-806, 1979.
DOI : 10.1002/app.1979.070230631

. Celzard, Flexible-elastic copolymerized polyurethane-tannin foams, J. Appl. Polym
URL : https://hal.archives-ouvertes.fr/hal-01295582

O. Sci, M. Faruk, H. Sain, T. Hatakeyama, and . Hatakeyama, Continuous Extrusion Foaming of Lignin Enhanced Thermoplastic Polyurethane (TPU) Advances of Polyurethane Foams Derived from Lignin, Improving aging resistance and mechanical properties of waterborne polyurethanes modified by lignin amines, pp.309-314, 2013.

Z. Wang, S. Xu, W. Hu, and Y. Xie, Fractionation of the Biopolyols from Lignocellulosic Biomass for the Production of Rigid Foams, BioEnergy Research, vol.23, issue.1, pp.896-902, 2013.
DOI : 10.1007/s11595-006-1125-7

D. E. García, W. G. Glasser, A. Pizzi, A. Osorio-madrazo, and M. Laborie, Hydroxypropyl tannin derivatives from Pinus pinaster (Ait.) bark, Industrial Crops and Products, vol.49, pp.730-739, 2013.
DOI : 10.1016/j.indcrop.2013.06.019

G. Rokicki and A. Piotrowska, A new route to polyurethanes from ethylene carbonate, diamines and diols, Polymer, vol.43, issue.10, pp.2927-2935, 2002.
DOI : 10.1016/S0032-3861(02)00071-X

V. Besse, F. Camara, C. Voirin, R. Auvergne, S. Caillol et al., Synthesis and applications of unsaturated cyclocarbonates, Di(glycerol carbonate) telechelic polyesters and polyolefins as precursors to polyhydroxyurethanes: an isocyanate-free approach, p.4545, 2013.
DOI : 10.1021/ba-1975-0142.ch009

URL : https://hal.archives-ouvertes.fr/hal-00851098

S. Camara, V. Benyahya, G. Besse, R. Boutevin, B. Auvergne et al., Reactivity of secondary amines for the synthesis of non-isocyanate polyurethanes Isocyanate-and Phosgene-Free Routes to Polyfunctional Cyclic Carbonates and Green Polyurethanes by Fixation of Carbon Dioxide The Chemistry of Dimethyl Carbonate, Green Chem. Eur. Polym. J. Macromol. Rapid Commun. Acc. Chem, vol.16, issue.35 14, pp.17-26, 1947.

]. T. Res18, H. Chen, J. Han, G. Yao, . Wang-]-p et al., 12-molybdophosphoric salts Molybdenum Trioxide Catalyst for Transesterification of Dimethyl Carbonate and Phenyl Acetate to Diphenyl Carbonate Preparation and catalytic property of modified multi-walled carbon nanotube-supported TiO2 for the transesterification of dimethyl carbonate with phenol From Petrochemical Polyurethanes to Biobased Polyhydroxyurethanes Synthesis of bio-based building blocks from vegetable oils: A platform chemicals approach Polyurethanes from hydrolysable tannins obtained without using isocyanates Bio-based hyperbranched polyurethane/clay nanocomposites: adhesive, mechanical, and thermal properties, 25] E. Delebecq, J.-P. Pascault, B. Boutevin, and F. Ganachaud, " On the Versatility of Urethane/Urea Bonds: Reversibility, Blocked Isocyanate, and Non-isocyanate Polyurethane Fatty acid modified polyurethane dispersion for surface coatings: Effect of fatty acid content and ionic content, pp.706-716, 2002.