Les méthodes d'assemblages, 2005. ,
Interconnexion puce-boitier flip chip, 1997. ,
Optimization of Data Center Room Layout to Minimize Rack Inlet Air Temperature, InterPACK-05 ,
High performance vertical connection for high-density 3D chip stacking package, Electronic Components and Technology Conference ECTC, pp.616-623, 2004. ,
New Silicon Realization Design Methodology Boosts 3D ICs With TSVs Available: http://www.cadence.com/Community/silicon- realization-design-methodology-boosts-3d-ics-with-tsvs.aspx, 1923. ,
24 II.2. Description de la matrice de détection 24 II.2.2. Principe de fonctionnement de la matrice de photo-détecteurs, 24 II.2.1. Généralités sur les matrices de détecteurs, p.39 ,
Densification des connexions 'Flip-Chip' grande surface: Analyse de l'assemblage d'un détecteur infrarouge et Mise au point d'une technologie innovante, Ecole Nationale, 2006. ,
Te, Journal of Applied Physics, vol.27, issue.10, pp.7099-7101, 1982. ,
DOI : 10.1016/0038-1098(78)91149-3
URL : https://hal.archives-ouvertes.fr/in2p3-01202519
Ultra fine pitch hybridization of large imaging detectors, 2003 IEEE Nuclear Science Symposium. Conference Record (IEEE Cat. No.03CH37515), pp.3518-3521, 2003. ,
DOI : 10.1109/NSSMIC.2003.1352669
A Fluxless and Low-Temperature Flip Chip Process Based on Insertion Technique, IEEE Transactions on Components and Packaging Technologies, vol.32, issue.1, pp.207-215, 2009. ,
DOI : 10.1109/TCAPT.2008.2005099
URL : https://hal.archives-ouvertes.fr/emse-00498450
The challenge of hybridization, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.465, issue.1, pp.195-199, 2000. ,
DOI : 10.1016/S0168-9002(01)00389-8
Introduction to System-on-package (SOP): Miniaturization of the Entire System, 2008. ,
Etude de la durée de vie d'assemblages microélectroniques par l'utilisation de simulations, de modèles de dégradation et de circuits intégrés spécifiques de test, 2003. ,
Effect of underfill on electromigration lifetime in flip chip joints, Journal of Alloys and Compounds, vol.481, issue.1-2, pp.659-663, 2009. ,
DOI : 10.1016/j.jallcom.2009.03.063
Effects of electromigration on microstructural evolution of eutectic SnPb flip chip solder bumps, Microelectronic Engineering, vol.83, issue.11-12, pp.2391-2395, 2006. ,
DOI : 10.1016/j.mee.2006.10.043
Reliability evaluations of flip chip package under thermal shock test, Microelectronic Engineering, vol.82, issue.3-4, pp.575-580, 2005. ,
DOI : 10.1016/j.mee.2005.07.058
Système de composant à hybrider autorisant un défaut de planéité, 1999. ,
A simple test chip to assess chip and package design in the case of plastic assembling, IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, vol.17, issue.4, pp.583-589, 1994. ,
DOI : 10.1109/95.335045
Stress Analysis for Processed Silicon Wafers and Packaged Micro-devices, Micro-and Opto-Electronic Materials and Structures: Physics, Mechanics, Design, Reliability, Packaging, E. Suhir, Y. C. Lee, and C. P ,
DOI : 10.1007/0-387-32989-7_45
The numerical analysis of strain behavior at the solder joint and interface in a flip chip package, Journal of Materials Processing Technology, vol.171, issue.1, pp.125-131, 2006. ,
DOI : 10.1016/j.jmatprotec.2005.06.061
Low Temperature Fluxless Flip-Chip Technology for Fine Pitch Bonding, 56th Electronic Components and Technology Conference 2006, pp.24-28, 2006. ,
DOI : 10.1109/ECTC.2006.1645621
Thermal performance of flip chip packages: Numerical study of thermo-mechanical interactions, Computational Materials Science, vol.43, issue.3, pp.469-480, 2008. ,
DOI : 10.1016/j.commatsci.2007.12.008
Processing mechanics for flip-chip assemblies, Computers & Structures, vol.71, issue.4, pp.457-468, 1999. ,
DOI : 10.1016/S0045-7949(98)00202-8
Thermo-fatigue life evaluation of SnAgCu solder joints in flip chip assemblies, Journal of Materials Processing Technology, vol.183, issue.1, pp.6-12, 2007. ,
DOI : 10.1016/j.jmatprotec.2006.09.010
High temperature reliability of lead-free solder joints in a flip chip assembly, Journal of Materials Processing Technology, vol.212, issue.2, pp.471-483, 2012. ,
DOI : 10.1016/j.jmatprotec.2011.10.011
Numerical analysis of thermo-mechanical behavior of indium micro-joint at cryogenic temperatures, Computational Materials Science, vol.52, issue.1, pp.274-281, 2012. ,
DOI : 10.1016/j.commatsci.2010.12.026
3D finite element modeling of 3D C2W (chip to wafer) drop test reliability: Optimization of internal architecture and materials, Microelectronics Reliability, vol.54, issue.1, pp.13-21, 2014. ,
DOI : 10.1016/j.microrel.2013.07.135
3D FEM Simulations of Drop Test Reliability on 3D-WLP: Effects of Solder Reflow Residual Stress and Molding Resin Parameters, Journal of Electronic Materials, vol.49, issue.3, pp.708-716, 2014. ,
DOI : 10.1109/ECTC.2008.4550283
Simulation thermo-mécanique d'une matrice infrarouge par éléments finis (Ansys), CEA-LETI, 2011. ,
Measurements of Young's modulus, Poisson's ratio, and tensile strength of polysilicon, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots, pp.424-429, 1997. ,
DOI : 10.1109/MEMSYS.1997.581881
Elastische Eigenschaften von einkristallinem Silicium in Abhangigkeit von der Temperatur und der Versetzungsdichte, Z. Met, vol.73, issue.9, p.552, 1982. ,
Measurement of Ultrasonic Wave Velocities and Elastic Moduli for Small Solid Specimens at High Temperatures, The Journal of the Acoustical Society of America, vol.31, issue.3, p.287, 1959. ,
DOI : 10.1121/1.1907714
Measurement of Young's Modulus of Silicon Single Crystal at High Temperature and Its Dependency on Boron Concentration Using the Flexural Vibration Method, Japanese Journal of Applied Physics, vol.39, issue.Part 1, No. 2A, pp.368-371, 2000. ,
DOI : 10.1143/JJAP.39.368
Recommended Values for the Thermal Expansivity of Silicon from 0 to 1000 K, Journal of Physical and Chemical Reference Data, vol.12, issue.2, p.179, 1983. ,
DOI : 10.1063/1.555681
Thermal expansion and lattice parameters of group IV semiconductors, Materials Chemistry and Physics, vol.46, issue.2-3, pp.259-264, 1996. ,
DOI : 10.1016/S0254-0584(96)01808-1
Numerical analysis of thermo-mechanical behavior of indium micro-joint at cryogenic temperatures, Computational Materials Science, vol.52, issue.1, pp.274-281, 2012. ,
DOI : 10.1016/j.commatsci.2010.12.026
Determination of thermal expansion of germanium, rhodium and iridium by X-rays, Acta Crystallographica Section A, vol.24, issue.4, p.469, 1968. ,
DOI : 10.1107/S056773946800094X
Thermal Expansion of Some Crystals with the Diamond Structure, Physical Review, vol.42, issue.1, p.136, 1958. ,
DOI : 10.1103/PhysRev.86.803
Ab initio determination of crystal lattice constants and thermal expansion for germanium isotopes, Solid State Communications, vol.143, issue.3, pp.161-165, 2007. ,
DOI : 10.1016/j.ssc.2007.04.043
Effects on High-Temperature-Elastic Properties on ?/?-Quartz Phase Transition of Fused Quartz, Journal of Materials Science Letters, vol.18, issue.10, p.751, 1999. ,
DOI : 10.1023/A:1006656127531
Low temperature-elastic moduli, Debye temperature and internal dilational and shear frictions of fused quartz, J. Mater ,
Thermal Expansion -1971, p.13, 1972. ,
Thermal Expansion Measurements of Quartz Glass by Laser Interferometry, 24th International Thermal Conductivity conference, p.405, 1997. ,
Elastic Constants of Indium from 1.4?? to 300??K, Physical Review, vol.6, issue.4, p.1011, 1961. ,
DOI : 10.1103/PhysRevLett.6.267
No Title, Z. Met, vol.39, issue.1 1, 1948. ,
Low-temperature elastic coefficients of polycrystalline indium, Materials Science and Engineering: A, vol.252, issue.1, pp.139-143, 1998. ,
DOI : 10.1016/S0921-5093(98)00490-0
Thermal expansivity and density of indium, Journal of Research of the National Bureau of Standards, vol.30, issue.6, p.427, 1934. ,
DOI : 10.6028/jres.030.029
Anisotropic thermal expansion of indium, Acta Crystallographica Section A, vol.25, issue.3, p.415, 1969. ,
DOI : 10.1107/S0567739469000830
Fiabilisation Thermomécanique des Assemblages Flip-Chip, 2012. ,
Tensile strength and ductility of indium, Materials Science and Engineering: A, vol.102, issue.2, pp.227-236, 1988. ,
DOI : 10.1016/0025-5416(88)90578-2
Mechanical characteristics of soft-brittle HgCdTe single crystals investigated using nanoindentation and nanoscratching, Applied Surface Science, vol.258, issue.24, pp.9756-9761, 2012. ,
DOI : 10.1016/j.apsusc.2012.06.026
Thermal expansion of ZnTe and HgTe and heat capacity of HgTe at low temperatures, Journal of Physics C: Solid State Physics, vol.13, issue.9, pp.1649-1656, 1980. ,
DOI : 10.1088/0022-3719/13/9/011
The low-temperature thermal expansion and Gruneisen parameters of some tetrahedrally bonded solids, Journal of Physics C: Solid State Physics, vol.8, issue.13, pp.2031-2042, 1975. ,
DOI : 10.1088/0022-3719/8/13/012
Thermal Expansion Coefficient and Bond Strength in Hg1???xCdxTe and Hg1???xZnxTe, physica status solidi (b), vol.50, issue.2, p.295, 1993. ,
DOI : 10.1139/p80-050
Te, Physical Review B, vol.15, issue.8, pp.5212-5216, 1985. ,
DOI : 10.1088/0022-3719/15/32/026
URL : https://hal.archives-ouvertes.fr/jpa-00225314
Properties of Narrow Gap Cadmium-Based Compounds, 1994. ,
Measurement of mechanical properties of three epoxy adhesives at cryogenic temperatures for CCD construction, 2006. ,
Simulation thermo-mécanique d'une matrice infrarouge par éléments finis (Ansys), CEA-LETI, 2011. ,
Thermodynamic modelling and assessment of the Au???In???Sn system, Calphad, vol.33, issue.1, pp.100-108, 2009. ,
DOI : 10.1016/j.calphad.2008.09.018
Thermodynamic reassessment of the Au???In binary system, Calphad, vol.27, issue.1, pp.27-37, 2003. ,
DOI : 10.1016/S0364-5916(03)00028-2
Thermal expansion of AuIn2, Scripta Materialia, vol.53, issue.10, pp.1153-1157, 2005. ,
DOI : 10.1016/j.scriptamat.2005.07.032
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.XI, issue.06, pp.1564-1583, 1992. ,
DOI : 10.1557/S0883769400054440
URL : https://hal.archives-ouvertes.fr/hal-01518596
Improved method to determine the hardness and elastic modulus using nanoindentation, KMITL Sci. Technol. J, vol.5, issue.2, pp.483-492, 2005. ,
Elastische Eigenschaften von einkristallinem Silicium in Abhangigkeit von der Temperatur und der Versetzungsdichte, Z. Met, vol.73, issue.9, p.552, 1982. ,
Measurement of Ultrasonic Wave Velocities and Elastic Moduli for Small Solid Specimens at High Temperatures, The Journal of the Acoustical Society of America, vol.31, issue.3, p.287, 1959. ,
DOI : 10.1121/1.1907714
Measurement of Young's Modulus of Silicon Single Crystal at High Temperature and Its Dependency on Boron Concentration Using the Flexural Vibration Method, Japanese Journal of Applied Physics, vol.39, issue.Part 1, No. 2A, pp.368-371, 2000. ,
DOI : 10.1143/JJAP.39.368
Effects on High-Temperature-Elastic Properties on ?/?-Quartz Phase Transition of Fused Quartz, Journal of Materials Science Letters, vol.18, issue.10, p.751, 1999. ,
DOI : 10.1023/A:1006656127531
Low temperature-elastic moduli, Debye temperature and internal dilational and shear frictions of fused quartz, J. Mater ,
Mechanical characteristics of soft-brittle HgCdTe single crystals investigated using nanoindentation and nanoscratching, Applied Surface Science, vol.258, issue.24, pp.9756-9761, 2012. ,
DOI : 10.1016/j.apsusc.2012.06.026
Elastic Constants of Indium from 1.4?? to 300??K, Physical Review, vol.6, issue.4, p.1011, 1961. ,
DOI : 10.1103/PhysRevLett.6.267
No Title A variational approach to the theory of the elastic behavior of multiphase materials, Z. Met. J. Appl. Phys, vol.39, issue.11, pp.127-140, 1948. ,
Asymptotic Analysis for Periodic Structures, 2011. ,
Non-homogeneous media and vibration theory, 1980. ,
Elastic properties of reinforced solids: Some theoretical principles, Journal of the Mechanics and Physics of Solids, vol.11, issue.5, pp.357-372, 1963. ,
DOI : 10.1016/0022-5096(63)90036-X
Détermination des propriétés thermomécaniques des composites à matrice métallique, Mémoires et Etudes Scientifiques, pp.73-84, 1990. ,
Contribution à la modélisation de la thermoélasticité et de l'acoustoélasticité des matériaux microhétérogénes, 1990. ,
The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.241, issue.1226, pp.376-396, 1957. ,
DOI : 10.1098/rspa.1957.0133
Multiple site self consistent scheme, International Journal of Engineering Science, vol.27, issue.5, pp.495-502, 1989. ,
DOI : 10.1016/0020-7225(89)90002-5
Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979. ,
DOI : 10.1016/0022-5096(79)90032-2
inclusion-based micromechanical modelling, International Journal of Engineering Science, vol.31, issue.1, pp.1-10, 1993. ,
DOI : 10.1016/0020-7225(93)90059-4
Elastic behaviour of multiply coated fibre-reinforced composites, International Journal of Engineering Science, vol.33, issue.10, pp.1419-1433, 1995. ,
DOI : 10.1016/0020-7225(95)00008-L
Micromechanical modelling of an arbitrary ellipsoidal multi-coated inclusion, Philosophical Magazine, vol.31, issue.10, pp.1305-1326, 2006. ,
DOI : 10.1016/S0065-2156(08)70332-6
Modélisation micrmécanique des matériaux composites à renforts ellipsoidaux multienrobés et applications, 2005. ,
Modelling effective properties of composite materials using inclusion concept. General considerations, Arch. Mech, vol.58, issue.3, pp.207-239, 2006. ,
Multi-site micromechanical modelling of thermo-elastic properties of heterogeneous materials, Composite Structures, vol.94, issue.6, pp.2068-2077, 2012. ,
DOI : 10.1016/j.compstruct.2012.01.014
Introduction to Computational Plasticity, OUP Oxford, 2005. ,
164 VI.2.1. Définition des modèles numériques, 164 VI.2. Validation du modèle........................ 172 VI.2.5. Comparaison des 4 modélisations, p.174 ,
185 VI.4.2. Résultats de simulation, Zoom structurel ,
Three-Dimensional Thermomechanical Simulation of Fine-Pitch High-Count Ball Grid Array Flip-Chip Assemblies, Journal of Electronic Materials, vol.53, issue.3, pp.671-684, 2014. ,
DOI : 10.1016/j.scriptamat.2005.07.032
Delamination in patterned films, International Journal of Solids and Structures, vol.44, issue.6, pp.1706-1718, 2007. ,
DOI : 10.1016/j.ijsolstr.2006.07.023
Fiabilisation Thermomécanique des Assemblages Flip-Chip, 2012. ,
Gold-Indium Intermetallic Compounds: Properties and Growth Rates, 1979. ,
Thermal expansion of AuIn2, Scripta Materialia, vol.53, issue.10, pp.1153-1157, 2005. ,
DOI : 10.1016/j.scriptamat.2005.07.032
225 B.5.1. Modules d'Young et coefficients, ., p.229 ,