The Effect of Austenite Grain Size and Temperature on The Rate of Bainite Formation, Metal Science and Heat Treatment, vol.4, pp.359-360, 1962. ,
Métallurgie Tome I: Métallurgie Physique, Collection Scientifique ENSAM, 1992. ,
Nouveau r??actif
pour la mise en ??vidence micrographique
du grain aust??nitique
des aciers tremp??s ou tremp??s-revenus, Revue de M??tallurgie, vol.52, issue.10, pp.830-836, 1955. ,
DOI : 10.1051/metal/195552100830
Mapping the Hot Deformation Microstructure of Ni-30Fe Alloy, ISIJ International, vol.45, issue.12, pp.1893-1896, 2005. ,
DOI : 10.2355/isijinternational.45.1893
Influence of the Prior Austenite Microstructure on the Transformation Products Obtained for C-Mn-Nb Steels after Continuous Cooling., ISIJ International, vol.39, issue.6, pp.583-591, 1999. ,
DOI : 10.2355/isijinternational.39.583
An alternative to the crystallographic reconstruction of austenite in steels, Materials Characterization, vol.89, pp.23-32, 2014. ,
DOI : 10.1016/j.matchar.2013.12.014
Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High-Strength Steels, Metallurgical and Materials Transactions A, 2014. ,
DOI : 10.1016/0001-6160(82)90033-5
URL : https://hal.archives-ouvertes.fr/hal-00871884
Bainite in steels, Metallurgical Transactions A, vol.22, issue.2, 2002. ,
DOI : 10.1007/BF02650098
URL : https://hal.archives-ouvertes.fr/jpa-00255655
Effects of austenite grain size and cooling rate on Widmanst??tten ferrite formation in low-alloy steels, Metallurgical and Materials Transactions A, vol.18, issue.4, pp.665-675, 1994. ,
DOI : 10.1179/026708389790340888
Contribution ?? l?????tude de la purification du fer
et ?? la d??termination de ses points de transformation, Revue de M??tallurgie, vol.53, issue.4, pp.311-319, 1956. ,
DOI : 10.1051/metal/195653040311
The Lattice Expansion of Iron, Proceedings of the Royal Society, pp.229-459, 1955. ,
DOI : 10.1098/rspa.1955.0102
A perspective on the morphology of bainite, Metallurgical Transactions A, vol.2, issue.1, pp.817-829, 1990. ,
DOI : 10.1007/BF02660526
Transformation Textures during Diffusional .ALPHA..RAR..GAMMA..RAR..ALPHA. Phase Transformations in Ferritic Steels., ISIJ International, vol.41, issue.5, pp.468-477, 2001. ,
DOI : 10.2355/isijinternational.41.468
A variant selection model for predicting the transformation texture of deformed austenite, Metallurgical and Materials Transactions A, vol.5, issue.8, pp.28-1755, 1997. ,
DOI : 10.1016/0956-7151(94)90332-8
Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions, Metallurgical and Materials Transactions A, vol.27, issue.5, pp.2233-2244, 1997. ,
DOI : 10.2355/isijinternational1966.27.425
Orientation relationship between austenite and bainite in a multiphased steel, Materials Characterization, vol.58, issue.4, pp.332-370, 2007. ,
DOI : 10.1016/j.matchar.2006.05.016
Reconstruction of parent grains from EBSD data, Materials Characterization, vol.57, issue.4-5, pp.386-401, 2006. ,
DOI : 10.1016/j.matchar.2006.03.008
Groupoid of orientational variants, Acta Crystallographica, pp.62-83, 2006. ,
The Effect of Carbon and Nickel upon the Stacking-Fault Energy of Iron, Metal Science Journal, vol.1966, issue.1, pp.1-123, 1967. ,
DOI : 10.1143/JPSJ.20.1370
In-Situ High Temperature X-ray Studies of Austempering Transformation in High Silicon Cast Steel, ISIJ International, vol.49, issue.8, pp.1220-1224, 2009. ,
DOI : 10.2355/isijinternational.49.1220
Effect of Initial Grain Orientation on Evolution of Deformed Microstructure in Hot Compressed Ni-30Fe Alloy, MATERIALS TRANSACTIONS, vol.45, issue.10, pp.2960-2965, 2004. ,
DOI : 10.2320/matertrans.45.2960
Formation of Ultrafine Ferrite by Strain-induced Dynamic Transformation in Plain Low Carbon Steel, ISIJ International, vol.43, issue.5, pp.746-754, 2003. ,
DOI : 10.2355/isijinternational.43.746
Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels, Metallurgical and Materials Transactions A, vol.35, issue.5, pp.1331-1349, 2002. ,
DOI : 10.2355/isijinternational.35.982
EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation, Journal of Microscopy, vol.73, issue.2, pp.138-151, 2005. ,
DOI : 10.1016/S1359-6454(97)00168-7
Fcc/Hcp martensitic transformation in the Fe-Mn system: Part II. Driving force and thermodynamics of the nucleation process, Metallurgical and Materials Transactions A, vol.25, issue.10, pp.35-83, 2004. ,
DOI : 10.1016/0378-4363(81)91004-4
Bases métallurgiques des traitements thermiques, p.111, 2004. ,
Laser-ultrasonic monitoring of phase transformations in steels, Scripta Materialia, vol.39, issue.6, pp.735-741, 1998. ,
DOI : 10.1016/S1359-6462(98)00179-1
A new technique for the quantitative real-time monitoring of austenite grain growth in steel, Scripta Materialia, vol.42, issue.9, pp.867-874, 2000. ,
DOI : 10.1016/S1359-6462(00)00305-5
The Morphology and Mechanical Properties of Bainite Formed from Deformed Austenite, Metallurgical Transactions A, vol.203, issue.12, pp.1801-1809, 1978. ,
DOI : 10.1007/BF02663411
EBSD study of purity effects during hot working in austenitic stainless steels, Materials Science and Engineering: A, vol.393, issue.1-2, pp.83-90, 2005. ,
DOI : 10.1016/j.msea.2004.09.064
URL : https://hal.archives-ouvertes.fr/emse-00506042
Influence of Heat Treatment and Carbon Content on The Structure of Pure Iron Carbon Alloys, Transactions of the American Society for Steel Treating, vol.9, p.717, 1926. ,
Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes., ISIJ International, vol.43, issue.3, pp.438-446, 2003. ,
DOI : 10.2355/isijinternational.43.438
Effect of Hot Deformation on Bainite Structure in Low Carbon Steels., ISIJ International, vol.35, issue.8, pp.1006-1012, 1995. ,
DOI : 10.2355/isijinternational.35.1006
Variant Selection in Grain Boundary Nucleation of Upper Bainite, Metallurgical and Materials Transactions A, vol.33, issue.5, pp.1003-1013, 2008. ,
DOI : 10.2320/matertrans1989.33.235
Dependence of strength???ductility characteristics on thermal history in lowcarbon, 5 wt-%Mn steels, Materials Science and Technology, vol.183, issue.5, pp.465-470, 1989. ,
DOI : 10.1007/BF02641975
Metallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels, Materials Characterization, vol.46, issue.5, pp.389-398, 2001. ,
DOI : 10.1016/S1044-5803(01)00142-5
Revealing austenite grain boundaries by thermal etching: advantages and disadvantages, Materials Characterization, vol.49, issue.2, pp.121-127, 2003. ,
DOI : 10.1016/S1044-5803(03)00002-0
Orientation determination by EBSP in an environmental scanning electron microscope, Scripta Materialia, vol.41, issue.1, pp.47-53, 1999. ,
DOI : 10.1016/S1359-6462(99)00086-X
Specific Analysis of EBSD Data to Study the Texture Inheritance due to the b?a Phase Transformation, Journal of Materials Science, vol.38, issue.6, pp.1289-1294, 2003. ,
DOI : 10.1023/A:1022842712172
Reliability of reconstructed ??-orientation maps in titanium alloys, Ultramicroscopy, vol.107, issue.12, pp.1129-1135, 2007. ,
DOI : 10.1016/j.ultramic.2007.01.012
URL : https://hal.archives-ouvertes.fr/hal-00169867
An advanced approach to reconstructing parent orientation maps in the case of approximate orientation relations: Application to steels, Acta Materialia, vol.60, issue.11, pp.4551-4562, 2012. ,
DOI : 10.1016/j.actamat.2012.04.034
Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Materials Science and Technology, vol.12, issue.1, pp.26-40, 2000. ,
DOI : 10.1016/0001-6160(67)90207-6
The effect of austenitizing treatment on formation of lower bainite in a plane carbon steel, Journal of the iron and steel institute, pp.361-365, 1959. ,
The mechanism of Martensite formation, JOM, vol.12, issue.9, pp.5-15, 1949. ,
DOI : 10.1002/srin.193801090
Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe???Mn???Si???AI steels, Materials Science and Technology, vol.16, issue.6, p.1213, 1998. ,
DOI : 10.1016/0956-716X(95)00193-Y
Crystallographic features of the??-to-?? transformation in a Nb-added transformation-induced plasticity steel, Metallurgical and Materials Transactions A, vol.52, issue.286, pp.2641-2653, 2006. ,
DOI : 10.1007/BF02641934
Steels: Microstructure and Properties Effect of Undercooling of Austenite on Strain Induced Ferrite Transformation Behavior, ISIJ, vol.43, pp.394-399, 2003. ,
Effect of Compressive Deformation on the Transformation Behavior of an Ultra-Low-Carbon Bainitic Steel, Materials Transactions, JIM, vol.34, issue.8, pp.658-668, 1993. ,
DOI : 10.2320/matertrans1989.34.658
Determination of the Orientation of a Parent ?? Grain from the Orientations of the Inherited ?? Plates in the Phase Transformation from Body-Centred Cubic to Hexagonal Close Packed, Journal of Applied Crystallography, vol.28, issue.5, pp.28-571, 1995. ,
DOI : 10.1107/S0021889895004067
A non-linear positive method to reconstruct the parent textures from the inherited textures in phase transformation, Journal of Applied Crystallography, vol.33, issue.2, pp.206-212, 2000. ,
DOI : 10.1107/S0021889899014879
URL : https://hal.archives-ouvertes.fr/hal-00111754
Refinement of orientation relations occurring in phase transformation based on considering only the orientations of the variants, Scripta Materialia, vol.64, issue.2, p.64, 2011. ,
DOI : 10.1016/j.scriptamat.2010.09.016
Recrystallization and related annealing phenomena, 2004. ,
Effect of process variables on formation of dynamic strain induced ultrafine ferrite during hot torsion testing, Materials Science and Technology, vol.74, issue.4, pp.1360-1367, 2001. ,
DOI : 10.1016/S0921-5093(96)10475-5
A study of deformation substructures in austenite using a model Ni???30 wt.% Fe alloy, Scripta Materialia, vol.45, issue.1, pp.25-32, 2001. ,
DOI : 10.1016/S1359-6462(01)00987-3
Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling, Metallurgical and Materials Transactions A, vol.40, issue.4, pp.1507-1517, 2001. ,
DOI : 10.2355/isijinternational.30.216
Texture in hot rolled austenite and resulting transformation products, Materials Science and Engineering: A, vol.257, issue.1, pp.9-17, 1998. ,
DOI : 10.1016/S0921-5093(98)00820-X
The Avrami kinetics of dynamic recrystallization, Acta Materialia, vol.57, issue.9, pp.2748-2756, 2009. ,
DOI : 10.1016/j.actamat.2009.02.033
The rotation axes and angles involved in the formation of self-accommodating plates of Widmanst??tten ferrite, Acta Materialia, vol.72, pp.13-21, 2014. ,
DOI : 10.1016/j.actamat.2014.03.059
Laser powered heating stage in a scanning electron microscope for microstructural investigations at elevated temperatures, Review of Scientific Instruments, vol.460, issue.4, p.79, 2008. ,
DOI : 10.1016/j.msea.2007.01.042
Optical observation of real materials using laser scanning confocal microscopy Part 1 ??? techniques and observed examples of microstructural changes, Science and Technology of Welding and Joining, vol.52, issue.5, pp.56-60, 2011. ,
DOI : 10.1016/j.actamat.2004.05.033
Banded structure in Dual Phase steels in relation with the austenite-to-ferrite transformation mechanisms, Journal of Materials Science, vol.407, issue.21, pp.7026-7038, 2011. ,
DOI : 10.1016/j.msea.2005.07.015
Monitoring austenite decomposition by ultrasonic velocity, Materials Science and Engineering: A, vol.425, issue.1-2, pp.238-243, 2006. ,
DOI : 10.1016/j.msea.2006.03.056
???ber den Mechanismus der Stahlh???rtung, Zeitschrift f???r Physik, vol.64, issue.5-6, pp.325-343, 1930. ,
DOI : 10.1007/BF01397346
Effect of austenite grain size on the transformation kinetics of upper and lower bainite in a low-alloy steel, Scripta Materialia, vol.59, issue.1, pp.87-90, 2008. ,
DOI : 10.1016/j.scriptamat.2008.02.036
Nucleation and variant selection during the ???????????? phase transformation in microalloyed steel, Acta Materialia, vol.59, issue.4, pp.1530-1541, 2011. ,
DOI : 10.1016/j.actamat.2010.11.017
Variant selection during the ??-to-??b phase transformation in hot-rolled bainitic TRIP-aided steels, Scripta Materialia, vol.61, issue.5, pp.61-520, 2009. ,
DOI : 10.1016/j.scriptamat.2009.05.015
Evolution of ultrafine-grained ferrite in hot successive deformation., Transactions of the Iron and Steel Institute of Japan, vol.27, issue.6, pp.492-498, 1987. ,
DOI : 10.2355/isijinternational1966.27.492
Effect of austenite grain size and bainite morphology on overall kinetics of bainite transformation in steels, Materials Science and Technology, vol.135, issue.5, pp.518-522, 1999. ,
DOI : 10.1063/1.1750380
Hardenability of Alloy Steels, 1939. ,
Observations sur le faci??s cristallographique de la martensite, Revue de M??tallurgie, vol.50, issue.7, p.465, 1953. ,
DOI : 10.1051/metal/195350070465
Effect of austenite deformation on crystallographic texture during transformations in microalloyed bainitic steel, Materials Science and Technology, vol.21, issue.8, pp.875-886, 2003. ,
DOI : 10.1179/mst.1995.11.11.1116
Influence of strain rate on production of deformation induced ferrite and hot ductility of steels, Materials Science and Technology, vol.10, issue.8, pp.721-727, 1994. ,
DOI : 10.1016/0001-6160(84)90049-X
Precise measurement of strain accommodation in austenite matrix surrounding martensite in ferrous alloys by electron backscatter diffraction analysis, Acta Materialia, vol.57, issue.4, pp.1120-1131, 2009. ,
DOI : 10.1016/j.actamat.2008.10.050
Accurate measurement of the orientation relationship of lath martensite and bainite by electron backscatter diffraction analysis, Scripta Materialia, vol.60, issue.12, pp.1113-1116, 2009. ,
DOI : 10.1016/j.scriptamat.2009.02.053
Mapping the parent austenite orientation reconstructed from the orientation of martensite by EBSD and its application to ausformed martensite, Acta Materialia, vol.58, issue.19, pp.6393-6403, 2010. ,
DOI : 10.1016/j.actamat.2010.08.001
Reconstruction of Parent Austenite Grain Structure Based on Crystal Orientation Map of Bainite with and without Ausforming, ISIJ International, vol.51, issue.7, pp.1174-1178, 2011. ,
DOI : 10.2355/isijinternational.51.1174
Quantitative analysis of variant selection in ausformed lath martensite, Acta Materialia, vol.60, issue.3, pp.1139-1148, 2012. ,
DOI : 10.1016/j.actamat.2011.11.018
Métallurgie en mise en forme à chaud, p.3031, 2009. ,
Effect of Austenite Grain Size on the Morphology and Crystallography of Lath Martensite in Low Carbon Steels, ISIJ International, vol.45, issue.1, pp.91-94, 2005. ,
DOI : 10.2355/isijinternational.45.91
Theory of Thermal Grooving, Journal of Applied Physics, vol.79, issue.3, pp.333-339, 1957. ,
DOI : 10.1098/rspa.1948.0057
Partie 1 », Techniques de l'ingénieur X-Ray investigation of the mechanism of the transformation from the face-centered cubic lattice to body-centered cubic, Sci. Rep. Tohoku Imp. Univ. Tokyo, vol.23, pp.1-126, 1934. ,
Irrational orientation relationship derived from rational orientation relationships using EBSD data, Crystal Research and Technology, vol.39, issue.1, pp.61-73, 2008. ,
DOI : 10.3139/146.018017
Morphology of Widmanstätten and Bainitic Ferrites, Materials Transactions, JIM, vol.32, issue.8, pp.697-704, 1991. ,
DOI : 10.2320/matertrans1989.32.697
High Temperature Laser Scanning Confocal Microscopy for realtime studies of phase transformations, Microscopy Society of America, pp.670-671, 2005. ,
The martensite transformation in thin foils of iron-nitrogen alloys, Philosophical Magazine, vol.197, issue.41, pp.577-584, 1959. ,
DOI : 10.1002/srin.195702209
A Model of Isothermal and Non Isothermal Transformation Kinetics of Bainite in 0.5% C Steels., 5%C Steels, pp.1010-1017, 2002. ,
DOI : 10.2355/isijinternational.42.1010
The Fascination of Grain Boundary Grooves, Advanced Engineering Materials, vol.3, issue.5, pp.277-282, 2001. ,
DOI : 10.1002/1527-2648(200105)3:5<277::AID-ADEM277>3.0.CO;2-G
Transformation Textures in Steels, ISIJ, vol.34, pp.927-942, 1994. ,
Texture of multiphased steel sheets, Proc. Int. Conf. on 'Advanced high strength sheet steels for automotive applications, pp.239-246, 2004. ,
Application of Nomarski differential interference contrast microscopy to highlight the prior austenite grain boundaries revealed by thermal etching, Materials Characterization, pp.61-584, 2010. ,
Evolution of Austenite Recrystallization and Grain Growth Using Laser Ultrasonics, Metallurgical and materials transactions A, pp.897-907, 2008. ,
DOI : 10.1016/S0921-5093(99)00648-6
High-temperature electron backscatter diffraction and scanning electron microscopy imaging techniques: In-situ investigations of dynamic processes, High- Temperature Electron Backscatter Diffraction and Scanning Electron Microscopy Imaging Techniques: Insitu Investigations of Dynamic Processes, pp.232-240, 2002. ,
DOI : 10.2138/am-1999-11-1204
The effect of small stresses on the kinetics of the bainite transformation, Materials Science and Engineering: A, vol.201, issue.1-2, pp.143-149, 1995. ,
DOI : 10.1016/0921-5093(95)09769-4
Synchrotron X-ray studies of austenite and bainitic ferrite, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.9, issue.2020, pp.1009-1027, 2008. ,
DOI : 10.1179/mst.1996.12.2.121
Dynamic Restoration Process of Ni-30Fe Alloy during Hot Deformation., ISIJ International, vol.42, issue.4, pp.432-439, 2002. ,
DOI : 10.2355/isijinternational.42.432
Effect of initial grain size of austenite on hot-deformed structure of Ni-30Fe alloy, Metallurgical and Materials Transactions A, vol.17, issue.286, pp.3399-3408, 2004. ,
DOI : 10.1007/BF02646835
Dynamically transformed ferrite fraction inferred from dilatometry measurements after deformation, Materials Science and Engineering: A, vol.487, issue.1-2, pp.487-93, 2008. ,
DOI : 10.1016/j.msea.2007.09.065
Microstructural Evolution and Kinetics for Post-dynamic Transformation in a Plain Low Carbon Steel, ISIJ International, vol.48, issue.7, pp.994-1000, 2008. ,
DOI : 10.2355/isijinternational.48.994
Effect of strain path on dynamic strain-induced transformation in a microalloyed steel, Acta Materialia, vol.66, pp.132-149, 2014. ,
DOI : 10.1016/j.actamat.2013.11.062
Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel, Acta Materialia, vol.60, issue.5, pp.2387-2396, 2012. ,
DOI : 10.1016/j.actamat.2011.12.018
Dynamic behaviour of 304 stainless steel during high Z deformation, Materials Science and Engineering: A, vol.528, issue.9, pp.3310-3320, 2011. ,
DOI : 10.1016/j.msea.2010.12.093
Comparison of 304 stainless steel and Ni?30% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing, Acta Materialia, p.59, 2011. ,
Transformation Kinetics of Bainite during Isothermal Holding and Continuous Cooling, pp.461-470, 1982. ,
Computer Modelling of Phase Transformation from Work-hardened Austenite., ISIJ International, vol.32, issue.3, pp.306-315, 1992. ,
DOI : 10.2355/isijinternational.32.306
Austenite texture and bainite/austenite orientation relationships in TRIP steel, Scripta Materialia, vol.45, issue.8, pp.909-916, 2001. ,
DOI : 10.1016/S1359-6462(01)01110-1
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling, Acta Materialia, vol.53, issue.20, pp.5439-5447, 2005. ,
DOI : 10.1016/j.actamat.2005.08.017
Austenite texture and bainite/austenite orientation relationships in TRIP steel, Scripta Materialia, vol.45, issue.8, pp.909-916, 2001. ,
DOI : 10.1016/S1359-6462(01)01110-1
In-Situ Observation of Texture Changes during Phase Transformations in Ultra-Low-Carbon Steel, Metallurgical and materials transactions A, pp.261-267, 2007. ,
DOI : 10.2355/isijinternational.41.468
Théorie élémentaire des dislocations, Masson & Cie, 1970. ,
The austenite-to-martensite transformation in Fe???30%Ni after deformation by simple shear, Acta Materialia, vol.48, issue.10, pp.2737-2749, 2000. ,
DOI : 10.1016/S1359-6454(99)00460-7
A dislocation-based model for variant selection during the ??-to-????? transformation, Metallurgical and Materials Transactions A, vol.44, issue.11, pp.889-901, 2001. ,
DOI : 10.1080/14786444108561385
Dynamic ??? Transformation during Hot Deformation in Iron?Nickel? Carbon Alloys, ISIJ, vol.20, pp.200-206, 2000. ,
Effects of the Austenite Grain Size and Deformation in the Unrecrystallized Austenite Region on Bainite Transformation Behavior and Microstructure., ISIJ International, vol.35, issue.8, pp.1020-1026, 1995. ,
DOI : 10.2355/isijinternational.35.1020
Acicular ferrite transformation in alloy-steel weld metals, Journal of Materials Science, vol.30, issue.3, pp.839-845, 1991. ,
DOI : 10.1179/mst.1989.5.1.93
Austenite grain size and the martensite-start temperature, Scripta Materialia, vol.60, issue.7, pp.493-495, 2009. ,
DOI : 10.1016/j.scriptamat.2008.11.043
Microstructure of martensite in Fe-CCr steel, Materials Science and Engineering A, pp.481-482, 2008. ,
Characterization and quantification of complex bainitic microstructure in high and ultra-high strength linepipe steels, Materials Science Forum, pp.500-501, 2005. ,
In situ observation of phase transformation in Fe???0.15C binary alloy, Journal of Alloys and Compounds, vol.484, issue.1-2, pp.929-933, 2009. ,
DOI : 10.1016/j.jallcom.2009.05.074
Bainite Transformation in Deformed Austenite, Metallurgical and Materials Transactions A, vol.50, issue.432, pp.41-1448, 2010. ,
DOI : 10.1179/mst.1989.5.4.398
Variant Selection of Low Carbon High Alloy Steel in an Austenite Grain during Martensite Transformation, ISIJ, vol.3, pp.510-515, 2012. ,
69 II.2.1. Microscopie optique et électronique, II.2. Analyse des microstructures de transformation 69 II.2.2. Méthode de quantification des tailles de grains austénitiques, p.69 ,
Refinement of orientation relations occurring in phase transformation based on considering only the orientations of the variants, Scripta Materialia, vol.64, issue.2, pp.114-117, 2011. ,
DOI : 10.1016/j.scriptamat.2010.09.016
Evaluation of the orientation relations from misorientation between inherited variants: Application to ausformed martensite, Acta Materialia, vol.82, pp.137-144, 2015. ,
DOI : 10.1016/j.actamat.2014.09.007
URL : https://hal.archives-ouvertes.fr/hal-01514142
Texture transformations???the misorientation distribution function, Acta Metallurgica, vol.24, issue.4, pp.361-370, 1976. ,
DOI : 10.1016/0001-6160(76)90011-0
Quantitative analysis of variant selection in ausformed lath martensite, Acta Materialia, vol.60, issue.3, pp.1139-1148, 2012. ,
DOI : 10.1016/j.actamat.2011.11.018
The morphology and crystallography of lath martensite in Fe-C alloys, Acta Materialia, vol.51, issue.6, pp.1789-1799, 2003. ,
DOI : 10.1016/S1359-6454(02)00577-3
The morphology and crystallography of lath martensite in alloy steels, Acta Materialia, vol.54, issue.19, pp.5323-5331, 2006. ,
DOI : 10.1016/j.actamat.2006.07.009
The Effect of Hot Rolling Conditions and Chemical Compositions on the Onset Temperature of γ-α Transformation after Hot Rolling, Tetsu-to-Hagane, vol.67, issue.1, p.214, 1982. ,
DOI : 10.2355/tetsutohagane1955.67.1_143
Texture de déformation, de recristallisation et de transformation de phase dans l'acier Fe-0,6%C et l'alliage FeNi, 2006. ,
Application of Nomarski differential interference contrast microscopy to highlight the prior austenite grain boundaries revealed by thermal etching, Materials Characterization, pp.61-584, 2010. ,
A study on the formation mechanisms of butterfly-type martensite in Fe???30% Ni alloy using EBSD-based orientation microscopy, Acta Materialia, vol.57, issue.6, pp.1931-1937, 2009. ,
DOI : 10.1016/j.actamat.2008.12.035
The Temperature of Formation of Martensite and Bainite in Low Alloy Steels, Journal of the Iron and Steel Institute, vol.183, pp.349-359, 1956. ,
Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel, Acta Materialia, vol.60, issue.5, pp.2387-2396, 2012. ,
DOI : 10.1016/j.actamat.2011.12.018
Bainite and martensite start temperature calculated with exponential carbon dependence, Materials Science and Technology, vol.60, issue.4, pp.487-495, 2012. ,
DOI : 10.1007/BF02649788
New EBSD Method to Quantify Complex Microstructures in AHSS and its application, Rapport interne ArcelorMittal, 2011. ,
Recrystallization and Texture Development in Hot Rolled 1050 Aluminum, Materials Science Forum, vol.467, issue.470, pp.467-470, 2004. ,
DOI : 10.4028/www.scientific.net/MSF.467-470.357
Bainite in steels, Metallurgical Transactions A, vol.22, issue.2, 2002. ,
DOI : 10.1007/BF02650098
URL : https://hal.archives-ouvertes.fr/jpa-00255655
Restitution de la microtexture parente à partir de la microtexture héritée mesurée par EBSD : Une application aux aciers faiblement alliés A Perspective on the Morphology of Bainite, Metallurgical Transactions A, vol.21, pp.817-829, 1990. ,
EBSD imaging of orientation relationships and variant groupings in different martensitic alloys and Widmanst??tten iron meteorites, Materials Characterization, vol.94, pp.93-110, 2014. ,
DOI : 10.1016/j.matchar.2014.05.015
Austenite Strengthening Accumulated Stress for Optimum Microstructures in Modern Bainitic Microalloyed Steels Revealing austenite grain boundaries by thermal etching: advantages and disadvantages, Research Programme of the Research Fund for Coal and Steel Materials Characterization, vol.49, pp.121-127, 2003. ,
Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Materials Science and Technology, vol.12, issue.1, pp.26-40, 2000. ,
DOI : 10.1016/0001-6160(67)90207-6
Application of electron backscatter diffraction to the study of phase transformations, International Materials Reviews, vol.55, issue.2, pp.65-128, 2007. ,
DOI : 10.1016/S1359-6454(02)00022-8
URL : https://hal.archives-ouvertes.fr/hal-00368012
Microstructures and hardness of as-quenched martensites (0.1???0.5%C), Acta Materialia, vol.59, issue.14, pp.5845-5858, 2011. ,
DOI : 10.1016/j.actamat.2011.05.061
Crystallography of grain boundary proeutectoid ferrite, Metallurgical Transactions A, vol.31, issue.7, pp.1419-1429, 1975. ,
DOI : 10.1016/0039-6028(72)90264-6
Effect of Austenite Grain Size on Martensitic Transformation of a Low Alloy Steel, Materials Science Forum, pp.475-479, 2005. ,
The morphology and crystallography of lath martensite in Fe-C alloys, Acta Materialia, vol.51, issue.6, pp.1789-1799, 2003. ,
DOI : 10.1016/S1359-6454(02)00577-3
The morphology and crystallography of lath martensite in alloy steels, Acta Materialia, vol.54, issue.19, pp.5323-5354, 2006. ,
DOI : 10.1016/j.actamat.2006.07.009
Accurate measurement of the orientation relationship of lath martensite and bainite by electron backscatter diffraction analysis, Scripta Materialia, vol.60, issue.12, pp.1113-1116, 2009. ,
DOI : 10.1016/j.scriptamat.2009.02.053
Crystallographic Analysis of Martensite ,
Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel, Acta Materialia, vol.60, issue.5, pp.2387-2396, 2012. ,
DOI : 10.1016/j.actamat.2011.12.018
Effects of the Austenite Grain Size and Deformation in the Unrecrystallized Austenite Region on Bainite Transformation Behavior and Microstructure., ISIJ International, vol.35, issue.8, p.35, 1995. ,
DOI : 10.2355/isijinternational.35.1020
Characterization and quantification of complex bainitic microstructure in high and ultra-high strength linepipe steels, Materials Science Forum, pp.500-501, 2005. ,
Évolution de la microstructure de l'austénite lors de la compression à chaud IV.1. Comportement rhéologique de l'austénite en compression à chaud, p.140 ,
A study of deformation substructures in austenite using a model Ni???30 wt.% Fe alloy, Scripta Materialia, vol.45, issue.1, pp.25-32, 2001. ,
DOI : 10.1016/S1359-6462(01)00987-3
Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel, Acta Materialia, vol.61, issue.11, pp.4142-4154, 2013. ,
DOI : 10.1016/j.actamat.2013.03.041
Effect of austenite deformation on crystallographic texture during transformations in microalloyed bainitic steel, Materials Science and Technology, vol.21, issue.8, pp.875-886, 2003. ,
DOI : 10.1179/mst.1995.11.11.1116
Quantitative analysis of variant selection in ausformed lath martensite, Acta Materialia, vol.60, issue.3, pp.1139-1148, 2012. ,
DOI : 10.1016/j.actamat.2011.11.018
Texture de deformation, de recristallisation et de transformation de phase dans l'acier Fe-0,6%C et l'alliage FeNi, 2006. ,
Comparison of 304 stainless steel and Ni?30% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing, Acta Materialia, p.59, 2011. ,
LSTAYLOR' ? Rate sensitive Taylor software, 1994. ,
A dislocation-based model for variant selection during the ??-to-????? transformation, Metallurgical and Materials Transactions A, vol.44, issue.11, pp.889-901, 2001. ,
DOI : 10.1080/14786444108561385
The Ferrite Transformation in Hot Deformed 0.036% Nb Austenite at Temperatures Above the Ae3, ISIJ International, vol.50, issue.8, pp.1185-1192, 2010. ,
DOI : 10.2355/isijinternational.50.1185
Effect of ausforming on nanobainite steel, Scripta Materialia, vol.63, issue.8, pp.819-822, 2010. ,
DOI : 10.1016/j.scriptamat.2010.06.024
Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel, Acta Materialia, vol.61, issue.11, pp.4142-4154, 2013. ,
DOI : 10.1016/j.actamat.2013.03.041
Crystallographic features of the??-to-?? transformation in a Nb-added transformation-induced plasticity steel, Metallurgical and Materials Transactions A, vol.52, issue.286, pp.2641-2653, 2006. ,
DOI : 10.1007/BF02641934
Effect of Undercooling of Austenite on Strain Induced Ferrite Transformation Behavior., ISIJ International, vol.43, issue.3, pp.394-399, 2003. ,
DOI : 10.2355/isijinternational.43.394
Variant selection during the ??-to-??b phase transformation in hot-rolled bainitic TRIP-aided steels, Scripta Materialia, vol.61, issue.5, pp.520-523, 2009. ,
DOI : 10.1016/j.scriptamat.2009.05.015
Accurate electron channeling contrast analysis of dislocations in fine grained bulked materials, Scripta Materialia, vol.84, pp.11-14, 2014. ,
Evolution of ultrafine-grained ferrite in hot successive deformation., Transactions of the Iron and Steel Institute of Japan, vol.27, issue.6, pp.492-498, 1987. ,
DOI : 10.2355/isijinternational1966.27.492
Quantitative analysis of variant selection in ausformed lath martensite, Acta Materialia, vol.60, issue.3, pp.1139-1148, 2012. ,
DOI : 10.1016/j.actamat.2011.11.018
Dynamically transformed ferrite fraction inferred from dilatometry measurements after deformation, Materials Science and Engineering: A, vol.487, issue.1-2, pp.93-98, 2008. ,
DOI : 10.1016/j.msea.2007.09.065
A model of grain fragmentation based on lattice curvature, Acta Materialia, vol.58, issue.5, pp.1782-1794, 2010. ,
DOI : 10.1016/j.actamat.2009.11.020
Characterisation and quantification of complex bainitic microstructures in high and ultra-high strength linepipe steels, Materials Science Forum, pp.500-501, 2005. ,