K. Ahaouari, F. Corvasce, P. Lipinski, and M. , Berveiller -"détermination des propriétés thermomécaniques des composites à matrice métallique, Mémoires et études scientiques Revue de Métallurgie, 1990.

N. Ali, G. Cabral, E. Titus, A. A. Ogwu, and J. , Grachio -Characterization of diamond adhesion on micro-grain WC-Co substrates using Brinell indentations and micro-Raman spectroscopy -Journal of physic : Condensed matter, pp.6661-6674

B. E. Alaca, M. T. Saif, and H. , Sehitoglu -On the interface debond at the edge of a thin lm on a thick substrate, Acta Materialia, vol.50, 1197.

]. S. Amiraghi-1999, H. S. Amiraghi, E. Reehal, Z. Plappert, R. J. Bajic et al., Wheeler -Growth and erosive wear performance of diamond coatings on WC substrates -Diamond and related materials, pp.1999-845

E. Anger, A. Gicquel, Z. Z. Wang, and M. F. , Chemical and morphological modifications of silicon wafers treated by ultrasonic impacts of powders: consequences on diamond nucleation, Diamond and Related Materials, vol.4, issue.5-6, pp.759-764
DOI : 10.1016/0925-9635(94)05301-4

Y. Avigal and A. , Homan -A new method for nucleation enhancement of diamond -Diamond and related materials 8 -p127, pp.131-1999

]. V. Baranauskas, A. C. Peterlevitz, H. J. Ceragioli, S. F. Durrant, and M. C. , Tosin -Nucleation enhancement of diamond using natural lamellar hematite in the chemical vapor deposition process - Thin Solid Films, pp.377-378, 2000.

T. Barré and -. , Modications des propriétés de surface du carbure de Tungstène fritté cobalt en vue du dépôt de diamant par CVD -Thése, 2000.

S. Barradas-etude, aide du choc laser, des mécanismes d'adhérence aux interfaces cuivre/aluminium et cuivre / cuivre obtenues par projection thermique, 2004.

B. Cyril, Etude numérique et expérimentale de la séparation pr chocs brefs d'interface de revêtements multicouches

M. Strong and R. M. , Wentorf Jr -Errors in diamond synthesis, Nature, vol.365, 1993.

]. C. Borges, E. Pfender, J. Heberlein, and C. V. , Anderson - Adhesion improvement of diamond lms on molybdenum rod, Diamond and Related Materials, vol.7, 1351.

F. P. Bundy, H. T. Hall, H. M. Strong, and R. H. , Wentorf -Manmade diamonds -Nature, pp.51-1955

J. O. Carneiro, J. P. Alpuim, and V. , Teixeira -Experimental bending tests and numerical approach to determine the fracture mechanical properties of thin ceramic coatings deposited by magnetron sputtering -Surface & Coatings Technology, 2006.

L. , R. Castro, P. Vieville, and P. , Lipinski -Correction of dynamic eects on force measurements made with piezoelectric dynamometers, International Journal of Machine Tools & Manufacture, vol.46, 1707.

]. J. Chaboche, R. Girard, and P. , Levasseur -On the interface debounding models -Internationnal journal of dammage mechanics, pp.220-257, 1997.

B. F. Chen, J. Hwang, G. P. Yu, and J. H. , Huang -In situ observation of the cracking behaviour of TiN coating -Thin Solid Films, pp.173-178

Y. R. Chou and J. Liu, CVD diamond tool performance in metal matrix composite machining, Surface and Coatings Technology, vol.200, issue.5-6, pp.1872-1878, 2005.
DOI : 10.1016/j.surfcoat.2005.08.094

P. Collignon and R. , Oriol -Les diérents dépôts base carbone -Documentations Balzers, 2002.

C. A. Antonio and J. , Paulo Davim -Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model -Composites : Part A 33 -p213, 2002.

F. Corvasce, P. Lipinski, and M. , Berveiller -Thermomechanical behaviour of metal matrix composites -6em journée Nationales sur les composites, 1988.

B. Dacic-plasma, J. Technology, C. Diamond-plasma, J. Technology, C. Diamond et al., Grégoire -Caractérisation par l'émission acoustique de l'adhérence et de l'endommagement d'un revêtement : cas d'un revêtement WC-Co sur l'acier -Chimie, 2001.

]. D. Dalmas, S. Benmedhakene, H. Kebir, C. Richard, A. Laksimi et al., Roleandt -Investigation on failure mechanisms in WC-Co coated materials -Surface and Coatings Technology, pp.173-130, 2003.

[. E. Darque and E. , Felder -adhésion et adhérence -sciences et techniques de l'ingénieur Edition CNRS, 2003.

J. , P. Davim, and A. M. Baptista, Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminium, Journal of Materials Processing Technology, vol.103, pp.417-423, 2000.

J. P. Davim, Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays, Journal of Materials Processing Technology, vol.132, issue.1-3, pp.340-344, 2002.
DOI : 10.1016/S0924-0136(02)00946-9

V. Pies, Buck -Pre-treatment of substrate surface for improvement adhesion of diamond lms on hard metal cutting tools -Diamond and related materials, 1478.

F. Deuerler, H. Gruner, and M. Pohl, Ladji Tikana -Wear mechanisms of diamond-coated tools -Surface and coatings technology, 2001.

F. Deuerler, O. Lemmer, M. Franck, M. Pohl, and C. , Heiÿing -Diamond Films for wear protection of hardmetal tools, International Journal of refractory Metals & hard materials, vol.20, 2002.

A. Devillez, S. Lesko, and W. , Mozer -Cutting tool crater wear measurement with white light interferometry -Wear, pp.5665-2004

B. Dischler, Christophe Wild -Low pressure synthetic diamond -Material processing

. Morgan-, Comparison between acid leaching and siliciding pretreatments -Thin Solid Films, pp.378-239

S. Durante, G. Rutelli, and F. Rabezzana, Aluminium-based MMC machining with diamond-coated cutting tools, Surface and coatings technology, vol.94, pp.632-640, 1997.

]. A. Eliyahu, J. Buehler, M. Ben-chorin, and H. Cohen, Nano-particles seeding and its characterization by X-ray photoelectron spectroscopy (XPS), Diamond and Related Materials, vol.8, issue.2-5, pp.146-149, 1999.
DOI : 10.1016/S0925-9635(98)00399-9

J. Ferreira, N. L. Coppini, and F. L. Neto, Characteristics of carbon???carbon composite turning, Journal of Materials Processing Technology, vol.109, issue.1-2, pp.65-71, 2001.
DOI : 10.1016/S0924-0136(00)00776-7

F. Girot, Géhin -Perçage à sec des alliages d'aluminium aéronautique -Mécanique et industrie, 2002.

]. P. Goudeau, L. Vandenbulcke, C. Met, M. I. De-barros, P. Andreazza et al., Gailhanou -X-ray diraction analysis of residual stresses in smooth ned-diamond coatings deposited on TA6V alloys -Surface & Coatings Technology, pp.170-173, 2005.

J. Gunnars and A. , Alahelisten -Thermal stresses in diamond coatings and their inuence on coating wear and failure -Surface and coatings technology, pp.302-312

P. Ghidossi, M. Mansori, and F. , Pierron -The cutting eect of composite coupons on their mechanical strengths -Mécanique et industries, pp.361-378, 2002.

H. Tracy, Hall -Synthesis of diamond, Journal of chemical education, vol.38, pp.10-1961

T. Hall and -. , Successful diamond synthesis -internal Memo Report C-55-3 -Chemistry Research Department -General Elec- tric, 1999.

E. Harry, M. Ignat, A. Rouzaud, and P. , Cracking investigation of W and W(C) films deposited by physical vapor deposition on steel substrates, Surface and Coatings Technology, vol.111, issue.2-3, pp.177-183
DOI : 10.1016/S0257-8972(98)00732-4

R. Haubner and B. , On the formation of diamond coatings on WC/Co hard metal tools, International Journal of Refractory Metals and Hard Materials, vol.14, issue.1-3, pp.111-118
DOI : 10.1016/0263-4368(96)83424-X

R. Haubner, A. Köpf, and B. , Lux -Diamond deposition on hardmetal substrates after pre-treatment with boron or sulfur compounds - Diamond and related Material, pp.555-561, 2001.

J. Peter, Heath -devellopments in applications of PCD toolings, Journal of materials processing technology, vol.116, pp.31-38

A. Inspektor, E. J. Oles, and C. Bauer, Theory and practice in diamond coated metal-cutting tools, International Journal of Refractory Metals and Hard Materials, vol.15, issue.1-3, pp.49-56
DOI : 10.1016/S0263-4368(96)00045-5

M. Kamo, Synthesis of diamond from gas phase and its properties, The Rigaku Journal, vol.7, issue.2, 1990.

S. Kamiya, H. Takahashi, R. Polini, and E. , Traversa -Quantitative determination of the adhesive fracture toughness of CVD diamond to WC, Diamond and Related Materials, vol.9, 2000.

P. Karve, S. R. Sainkar, and S. T. , Kshirsaga -Role of surface features in CVD diamond nucleation on surface pretreated substrates - Materials letter, pp.387-391

. [. Yu and M. B. Konyashin, Guseva -Thin lms comparable with WC-Co cemented carbides as underlayers for hard and superhard coatings : states of the art -Diamond and related materials, pp.575-579, 1996.

A. Köpf, M. Sommer, R. Haubner, and B. , Lux Diamond -deposition on hardmetal substrates after pre-treatment with aluminium or aluminium compound -Diamond and related materials, pp.2001-790

]. A. Köpf, R. Haubner, and B. , Multilayer coatings containing diamond and other hard materials on hardmetal substrates, International Journal of Refractory Metals and Hard Materials, vol.20, issue.2, pp.107-113, 2002.
DOI : 10.1016/S0263-4368(02)00008-2

A. Köpf, S. Feistritzer, and K. Udier, Diamond coated cutting tools for machining of non-ferrous metals and fibre reinforced polymers, International Journal of Refractory Metals and Hard Materials, vol.24, issue.5, pp.354-359, 2006.
DOI : 10.1016/j.ijrmhm.2005.11.013

S. Kubelka, R. Haubner, B. Lux, R. Steiner, and G. Stingeder, Grasserbauer -Inuences of WC-Co hard metal substrate pre-treatments with boron and silicon on low pressure diamond deposition -Diamond and related materials 3, pp.1360-1369, 1994.

M. Lahres, P. Müller-hummel, and O. , Doerfel -Applicability of different hard coatings in dry milling aluminium alloys -Surface and coatings technology, pp.116-121, 1997.

H. Liu and S. David, Studies on nucleation process in diamond CVD: an overview of recent developments, Diamond and Related Materials, vol.4, issue.10, pp.1173-1188, 1995.
DOI : 10.1016/0925-9635(96)00297-2

H. W. Liu, C. X. Gao, X. Li, C. X. Wang, Y. H. Han et al., Zou -Selective deposition of diamond lms on insulators by selective seeding with a double-layer mask -Diamond and Related Materials, 2001.

S. Liu and -. , Yu -Physical properties of diamond coatings on a WC-6%Co substrate -Chin. Phy, p.422, 2002.

B. Lux and R. , Haubner -Diamond as wear resistant coating -Phil

]. H. Makita, N. Nishimura, N. Jiang, A. Atta, T. Ito et al., Hiraki - Ultra High particle density seeding with nano-crystals diamond particles -Thin solid lm, pp.281-282, 1996.

]. V. Malcher, A. Kromka, J. Janik, V. Dubravcova, and P. , Vogrincic -Raman study of free-standing diamond lms and coatings deposited on Tungsten carbide tools prepared by hot-lament CVD method -acta physica slovaca vol, 2000.

K. Mallika and R. , Komanduri -Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD -Wear, 1999.

J. Malzbender, J. M. Den-toonder, A. R. Balkenende, and G. , de With -Measuring mechanical properties of coatings : a methodology applied to nano-particle-lled sol-gel coatings on glass - Material science and engineering, pp.36-47, 2002.

S. Marinkovic, S. Stankovic, and Z. , RakocÏevic -Eects of cementedcarbide surface pretreatment in combustion ame chemical vapour deposition of diamond -Thin Solid Films, pp.354-1999

S. Matsumoto, Y. Sato, M. Tsutisimi, and N. Setaka, Growth of diamond particles from methane-hydrogen gas, Journal of Materials Science, vol.5, issue.11, pp.3106-3118, 1982.
DOI : 10.1103/PhysRevB.1.1687

S. Matsumoto, I. Liosoya, and Y. , Manabc and Y. libino -Diamond synthesis by thermal-plasma CVD -Pure & Appl, Chem, vol.64, issue.5, pp.751-758, 1992.

W. Paul, May -Diamond thin lms : a 21st-century material

J. Miao, J. Song, Y. Xue, Y. Tong, W. Tang et al., Lu -Eect of a two step pretreatement method on adhesion of CVD diamond coatings on cemented carbide substrates -Surface and coatings technology, pp.33-36, 2004.

D. Moulin, P. Chevrier, P. Lipinski, and T. , Barre -diamond debounding in tool application -16th European congress of Fracture (ECF16) -Alexabdropoulis (Greece), 2006.

P. Müller-hummel and M. , Lahres -Quantitative measurement of températures on diamond-coated tools during machining -Diamond and related materials, 1216.

]. R. Mendes-de-barros, E. J. Corat, N. G. Fereira, T. M. De-souza, V. G. Trava-airoldi et al., Iha -Dispersion liquid for efcient seeding in CVD diamond nucleation enhancement, pp.1323-1332, 1996.

M. Nesladek, K. Vandierendonck, C. Quaeyhaegens, and L. M. Kerkhofs, Stals -Adhesion of diamond coatings on cemented carbides -Thin solid Films, Issues, vol.270, issue.12, pp.184-188, 1995.

]. C. Nouveau, E. Jorand, C. Decès-petit, C. Labidi, and M. , Djouadi -Inuence of carbide substrates on tribological properties of chromium and chromium nitride coatings : application to wood machining -Wear, pp.2005-157, 2005.

H. Ollendorf and D. , Schneider -A comparative study of adhesion test methods for hard coatings, Surface and Coatings Technology, vol.113, pp.1999-86

R. Pfaenberger and J. , Halwax -CVD diamond tools machining aluminium in the new 5-series BMWs -Industrial diamond, Review, pp.21-22, 2004.

R. Polini and M. , Tomellini -Analysis of size distribution functions of diamond crystallites formed in the early stages of chemical vapour deposition, Diamond and Related Materials, vol.4, pp.1995-1311

]. R. Polini, P. , S. Lo-casto, V. F. Ruisi, and E. , Traversa -Cutting performances and indentation behaviour of diamond lms on Co-cemented tungsten carbide -Surface coatings technology, pp.2000-78, 2000.

]. Polini, F. Casadei, D. Pierangelo, and . Antonio, Enrico Traversa -Dry turning of alumina/aluminium composites with CVD diamond coated Co-Cemented tungsten carbide tools -Surface and coatings technology, pp.2003-127, 2003.

H. G. Prengel, W. R. Pfouts, and A. , Santhanam -State of the art in hard coatings for carbide cutting tools -Surface and coatings technology, pp.183-190

M. Rahman, S. Ramakrishna, J. R. Prakash, and D. C. Tan, Machinability study of carbon ber reinforced compositeJournal of, Materials Processing technology, vol.89, pp.292-297, 1999.

J. Rech, Contribution à la compréhension des modes d'action tribologiques et thermiques des revêtements en usinage -Application au cas du taillage des dentures à la fraise mère à grande vitesse -Thesis of ENSAM cluny, 2002.

J. Rech, J. Battaglia, and A. , Thermal influence of cutting tool coatings, Journal of Materials Processing Technology, vol.159, issue.1, pp.119-124, 2005.
DOI : 10.1016/j.jmatprotec.2004.04.414

L. L. Regel and W. , Wilcox -Diamond lm deposition by chemical vapor transport, Acta Astronautica, vol.48, pp.23-129144

I. Reineck, M. E. Sjöstrand, J. Karner, and M. , Diamond coated cutting tools, International Journal of Refractory Metals and Hard Materials, vol.14, issue.1-3, pp.187-193, 1996.
DOI : 10.1016/0263-4368(96)83433-0

]. C. Richard, G. B6ranger, J. F. Lu, and T. Flavenot, Grégoire - Four-point bending tests of thermally produced WC-Co coatings, Surface and Coatings Technology, vol.78, pp.1996-284, 1996.

G. Rochat, Y. Leterrier, P. Fayet, and J. E. , Manson -Mechanical analysis of ultrathin oxide coatings on polymer substrates in a scanning electron microscope -Thin Solid Films, p.437, 2003.

K. Saijo, M. Yagi, K. Shibuki, and S. , Tahatsu -The improvement of the adhesion strength of diamond lms -Surface and coatings technology, pp.1990-2020

B. Sahoo and A. Chattopadhyay, A B Chattopadhyay -Development of diamond coated tool and its performance in machining Al11%Si alloy -Bull, Mater. Sci, vol.25, issue.6, pp.487-491, 2002.

Y. Sahin, M. Kok, and H. Celik, Tool wear and surface roughness of Al2O3 particle-reinforced aluminium alloy composites, Journal of Materials Processing Technology, vol.128, issue.1-3, pp.280-291, 2002.
DOI : 10.1016/S0924-0136(02)00467-3

]. D. Schneider, B. Schultrich, P. Burck, H. Scheibe, G. Jörgensen et al., Lahres -Non-destructive characterization of CVD diamond lms on cemented carbide cutting tools -Diamond and related materials, p.7596, 1998.

S. Serebrinsky and M. Ortiz, -A hysteretic cohesive-lax model of fatigue-crack nucleation -Scripta Materialia, pp.1193-1196, 2005.

A. A. Shaik, M. A. Khan, H. A. Naseem, and W. , Brown -Eect of early methane introduction on the properties of nano-seeded MPCDV diamond lms -Thin Solid Films, pp.355-356, 1999.

K. Shibuki, K. Sasaki, M. Yagi, T. Suzuki, and Y. , Ikuhara -Diamond coating on WC-Co and Wc for cutting tools -Surface and coatings technology, pp.69-369

B. F. Sorensen and T. K. , Jacobsen -Determination of cohesive laws by the J integral approach -Engineering Fracture Mechanics, 1841.

S. Stankovic, Z. Rakocevic, and S. , Marinkovic -Eects of the pretreatment of a cemented carbide surface on its properties, Diamond and Related Materials, vol.8, pp.1999-207

G. Straelini, P. Scardi, A. Molinari, and R. , Polini -Characterization and sliding behavior of HFCVD diamond coatings on WCCo, 2001.

R. J. Stokes and D. , Fennell Evans -Fundamentals of interfacial engineering -EditionWiley -VCH

H. K. Tönsho, A. Mohfeld, C. Gey, and J. , Winkler -Mechanical pretreatment for improved adhesion of diamond coatings -Surface and technology, pp.119-1999

E. Uhlmann, U. Lachmund, and M. , Brücher -Wear behaviour of HFCVD-diamond coated carbide and ceramic tools -Surface and coatings technology, 2000.

]. M. Van-den-bosch, P. J. Schreurs, and M. G. , Geers -An improved description of the exponential Xu and needleman cohesive zone law for mixed mode decohesion -Engineering Fracture Mechanics, pp.73-1220, 2006.

]. M. Van-den-bosch, P. J. Schreurs, and M. G. , Geers-An improved cohesive zone model for mixed-mode decohesion -European Congress of Fracture 16th, Alexandropoulis, pp.1-4020, 2006.

]. T. Vandevelde, K. Vandierendonck, M. Van-stappen, W. Du-mong, and P. , Perremans -Cutting applications of DLC, hard carbon and diamond lms -Surface & coatings technology, pp.80-85, 1999.

Z. Xia, W. A. Curtin, and B. W. , A new method to evaluate the fracture toughness of thin films, Acta Materialia, vol.52, issue.12, pp.3507-3517
DOI : 10.1016/j.actamat.2004.04.004

C. Xie and W. Tong, Cracking and decohesion of a thin Al2O3 lm on a ductile Al5%Mg substrate, Acta Materialia, vol.53, pp.2005-477

X. Xu and A. , Needleman -Void nucleation by debonding in a crystal matrix -Modelling Simul, Mater. Sci. Eng, vol.1, pp.111-132, 1993.

Q. Yanming, Y. Qixun, and X. Lijing, Study on the adaptability of thick film diamond tool to cutting composites, International Journal of Machine Tools and Manufacture, vol.42, issue.4, pp.501-504, 2002.
DOI : 10.1016/S0890-6955(01)00136-5

J. Zimmer and K. V. , Ravi -Aspects of scaling CVD diamond reactors -Diamond and Related Materials, pp.2-3, 2006.