2. B. Sensibilité-au-maillage-essais-d-'impact-sur, . La, and . Fig, 1 ? Influence du maillage sur la densité de fissuration prévue par le modèle DFH dans le cas d'un impact sur la tranche à 180 m/s et après 5 µs. (a) Influence de la taille de maille (respectivement 0,3 mm et 0,5 mm pour le côté gauche et pour le côté droit) (b) Influence de l'orientation du maillage (respectivement maillage de 0,3 mm structuré et non structuré pour le côté gauche et pour le côté droit) Nous constatons qu'une augmentation de l'ensemble de ces paramètres conduit à une augmentation générale du niveau de vitesse pour un temps donné sans modifier significativement la pente d'accroissement de la vitesse. Notons toutefois que l'utilisation d'un angle de friction de 60?ou d'une cohésion de 100 MPa conduisent à une sur-estimation de la vitesse observée expérimentalement

T. J. Ahrens, W. H. Gust, and E. B. Royce, Material Strength Effect in the Shock Compression of Alumina, Journal of Applied Physics, vol.12, issue.10, pp.39-4610, 1968.
DOI : 10.1103/PhysRev.97.1544

C. Anderson and B. Morris, The ballistic performance of confined Al2O3 ceramic tiles, International Journal of Impact Engineering, vol.12, issue.2, pp.167-187, 1992.
DOI : 10.1016/0734-743X(92)90395-A

A. Jr and C. E. , A review of computational ceramic armor modeling, 2007.

. Dans, Advances in Ceramic Armor II -Engineering and Science Proceedings

A. Jr, C. E. Behner, T. Holmquist, T. J. Orphal, and D. L. , Penetration response of silicon carbide as a function of impact velocity, Int. J. Impact Eng, vol.38, pp.892-899, 2011.

A. Jr, C. E. Behner, T. Orphal, D. L. Nicholls, A. E. Templeton et al., Time-resolved penetration into pre-damaged hot-pressed silicon carbide, 2008.

A. Jr, C. E. Chocron, S. Behner, and T. , A constitutive model for In Situ comminuted silicon carbide, J. Am. Ceram. Soc, vol.92, issue.6, pp.1280-1286, 2009.

L. M. Barker and R. E. Hollenbach, Laser interferometer for measuring high velocities of any reflecting surface, Journal of Applied Physics, vol.61, issue.11, pp.4669-4675, 1972.
DOI : 10.1063/1.1685074

E. R. Barron, A. L. Alesi, and A. F. Park, Body armor for aircrewmen, 1969.

. Rep, 69-43-CE

P. Bartkowski and D. P. Dandekar, Spall strengths of sintered and hot pressed silicon carbide, AIP Conference Proceedings, pp.535-538, 1996.
DOI : 10.1063/1.50654

T. Behner, A. Jr, C. E. Holmquist, T. J. Orphal, D. L. Wickert et al., Penetration dynamics and interface defeat capability of silicon 209, 2011.

J. C. Beyer, W. F. Enos, and R. H. Holmes, Personnel protective armor, Army Medical Dept. Office of Surgeon General, Dept. of the Army, pp.666-667, 1962.

S. Bless, N. Ben-yami, L. , A. Eylon, and D. , Impenetrable targets struck by high velocity tungsten long rod, Proceedings 2nd Int. Conf. on structures under shock and impact, 1992.

. Dans, Shock waves in condensed matter. Spokane'85, pp.419-424

N. Bourne, Impact on alumina. I. Response at the mesoscale, Proc, 2006.
DOI : 10.1098/rspa.2006.1661

R. Soc, A 462, pp.3061-3080

N. Bourne, Impact on alumina. II. Linking the mesoscale to the continuum, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.462, issue.2075, 2006.
DOI : 10.1098/rspa.2006.1707

N. Bourne, Z. Rosenberg, I. G. Crouch, and J. E. Field, The Effect of Microstructural Variations upon the Dynamic Compressive and Tensile Strengths of Aluminas, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.446, issue.1927, 1994.
DOI : 10.1098/rspa.1994.0106

N. K. Bourne, W. H. Green, and D. P. Dandekar, On the one-dimensional recovery and microstructural evaluation of shocked alumina, Proc. R. Soc. A 462, pp.3197-3212, 2006.
DOI : 10.1098/rspa.2006.1713

X. Brajer, P. Forquin, R. Gy, and F. Hild, The role of surface and volume defects in the fracture of glass under quasi-static and dynamic loadings, Journal of Non-Crystalline Solids, vol.316, issue.1, pp.42-53, 2003.
DOI : 10.1016/S0022-3093(02)01936-1

URL : https://hal.archives-ouvertes.fr/hal-00322503

D. Broek, Elemantary Engineering Fracture Mechanics, Martinus Nijhoff, 1982.

J. Bryn, Practical issues in ceramic armour design. Dans : Ceramic Armor Materials by Design. The American Ceramic Society, pp.33-44, 2001.

J. Cagnoux, Spherical waves in pure alumina, effects of grain size on flow and fracture, Shock Compression of Condensed Matter, pp.445-448, 1989.

J. Cagnoux, P. Chartagnac, P. Héreil, and M. Perez, Lagrangian analysis. Modern tool of the dynamics of solids, Annales de Physique, vol.132, issue.11, pp.451-524, 1987.
DOI : 10.1103/PhysRev.94.42

J. Cagnoux and A. Cosculluela, Plasticité et fissuration de l'alumine sous sollicitations dynamiques triaxiales : influence de la taille des grains, Proceedings 6 e Journée Nationale DYMAT, 1990.

J. Cagnoux and F. Longy, SPALLATION AND SHOCK-WAVE BEHAVIOUR OF SOME CERAMICS, Le Journal de Physique Colloques, vol.49, issue.C3, pp.3-10, 1988.
DOI : 10.1051/jphyscol:1988301

URL : https://hal.archives-ouvertes.fr/jpa-00227717

P. Y. Chanal and J. Luc, Development of fibered velocity interferometers for dynamic material behaviour studies, Proc. 60 th Meeting of the Aeroballistic Range Association, pp.20-25, 2009.

P. Y. Chanal, J. Petit, . Dr, and . Gramat, Evaluation des performances de GEPI dans la gamme de pression magnétique 10-30 GPa. Premières validations expérimentales et simulations numériques, Tech. Rep, vol.80, 2012.

M. W. Chen, J. W. Mccauley, D. P. Dandekar, and N. K. Bourne, Dynamic plasticity and failure of high-purity alumina under shock loading, Nature Materials, vol.43, issue.8, pp.614-618, 2006.
DOI : 10.1038/nmat1689

W. Chen and G. Ravichandran, Dynamic compressive behaviour of ceramics under lateral confinement, Le Journal de Physique IV, vol.04, issue.C8, pp.177-182, 1994.
DOI : 10.1051/jp4:1994825

URL : https://hal.archives-ouvertes.fr/jpa-00253380

C. Benloulo, I. S. Sanchez-galvez, and V. , A new analytical model to simulate impact onto ceramic/composite armors, International Journal of Impact Engineering, vol.21, issue.6, pp.461-471, 1998.
DOI : 10.1016/S0734-743X(98)00006-2

G. A. Cooper, J. C. Millett, N. K. Bourne, and D. P. Dandekar, Delayed Failure in a Shock Loaded Alumina, AIP Conference Proceedings, pp.847-850, 2006.
DOI : 10.1063/1.2263454

R. Cortés, M. A. Martínez, C. Navarro, and V. Sánchez-gálvez, Measurements of internal friction coefficient of SiC and Al2O3 powders, Journal of Materials Science, vol.21, issue.24, pp.6737-6740, 1993.
DOI : 10.1007/BF00356424

A. Bibliographie-cosculluela, Plasticité, endommagements et ruptures des alumines sous sollicitations dynamiques triaxiales :influence de la taille de grains, 1992.

M. Cowperthwaite and R. F. Williams, Determination of Constitutive Relationships with Multiple Gauges in Nondivergent Waves, Journal of Applied Physics, vol.14, issue.1, pp.456-462, 1971.
DOI : 10.1063/1.1658348

D. R. Curran, L. Seaman, T. Cooper, and D. A. Shockey, Micromechanical model for comminution and granular flow of brittle material under high strain rate application to penetration of ceramic targets, International Journal of Impact Engineering, vol.13, issue.1, pp.53-83, 1993.
DOI : 10.1016/0734-743X(93)90108-J

D. P. Dandekar, Shock response of boron carbide, 2001.
DOI : 10.21236/ADA393374

D. P. Dandekar and P. Bartkowski, Shock response of AD995 alumina, AIP Conference Proceedings, pp.733-736, 1994.
DOI : 10.1063/1.46437

D. P. Dandekar and P. T. Bartkowski, Tensile strengths of silicon carbide (SiC) under shock loading, 2001.

D. G. Davies, The statistical approach to engineering design in ceramics, 1973.

P. C. Den-reijer, Impact on ceramic faced armour, 1991.

C. Denoual, Approche probabiliste du comportement à l'impact du carbure de silicium : application aux blindages moyens, 1998.

C. Denoual and F. Hild, A damage model for the dynamic fragmentation of brittle solids, Computer Methods in Applied Mechanics and Engineering, vol.183, issue.3-4, pp.247-258, 2000.
DOI : 10.1016/S0045-7825(99)00221-2

URL : https://hal.archives-ouvertes.fr/hal-00013966

C. Denoual and F. Hild, Dynamic fragmentation of brittle solids: a multi-scale model, European Journal of Mechanics - A/Solids, vol.21, issue.1, pp.105-120, 2002.
DOI : 10.1016/S0997-7538(01)01187-1

URL : https://hal.archives-ouvertes.fr/hal-00013965

D. C. Drucker and W. Prager, Soil mechanics and plastic analysis or limit design, Quarterly of Applied Mathematics, vol.10, issue.2, 1952.
DOI : 10.1090/qam/48291

B. Erzar, Ecaillage, cratérisation et comportement en traction dynamique de bétons sous impact : approches expérimentales et modélisation, 2010.

B. Erzar and E. Buzaud, Shockless spalling damage of alumina ceramic, The European Physical Journal Special Topics, vol.58, issue.1, pp.71-77, 2012.
DOI : 10.1063/1.336184

B. Erzar and P. Forquin, Experiments and mesoscopic modelling of dynamic testing of concrete, Mechanics of Materials, vol.43, issue.9, pp.505-527, 2011.
DOI : 10.1016/j.mechmat.2011.05.002

J. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc. R. Soc. London A 241, pp.376-396, 1957.

H. D. Espinosa and P. D. Zavattieri, Modeling of ceramic microstructures: Dynamic damage initiation and evolution, AIP Conference Proceedings, pp.333-338, 1999.
DOI : 10.1063/1.1303486

A. G. Evans, Slow crack growth in brittle materials under dynamic loading conditions, International Journal of Fracture, vol.54, issue.2, pp.251-259, 1974.
DOI : 10.1007/BF00113930

I. Faber, K. Seifert, and L. W. Meyer, Correlation between the mechanical data of ceramics and their protective power against impact loading, 1995.

N. A. Fellows and P. C. Barton, Development of impact model for ceramic-faced semi-infinite armour, International Journal of Impact Engineering, vol.22, issue.8, pp.793-811, 1999.
DOI : 10.1016/S0734-743X(99)00017-2

R. Feng, G. R. Raiser, and Y. M. Gupta, Material strength and inelastic deformation of silicon carbide under shock wave compression, Journal of Applied Physics, vol.4, issue.1, pp.79-86, 1998.
DOI : 10.1016/S0022-3697(71)80226-3

D. Fernández-fdz, R. Zaera, and . Fernádez-sáez, A constitutive equation for ceramic materials used in lightweight armors, Computers & Structures, vol.89, issue.23-24, pp.2316-2324, 2011.
DOI : 10.1016/j.compstruc.2011.08.003

J. E. Field, S. M. Walley, W. G. Proud, H. T. Goldrein, and C. R. Siviour, Review of experimental techniques for high rate deformation and shock studies, 2004.

M. Flinders, D. Ray, A. Anderson, and R. A. Cutler, High-Toughness Silicon Carbide as Armor, Journal of the American Ceramic Society, vol.24, issue.[3], pp.2217-2226, 2005.
DOI : 10.1155/2003/357637

P. Forquin, Endommagement et fissuration de matériaux fragiles sous impact balistique, Rôle de la microstructure, 2003.

P. Forquin, Compréhension des mécanismes de résistance à l'impact de matériaux à base de céramique, 2011.

P. Forquin, C. Denoual, C. E. Cottenot, and F. Hild, Experiments and modelling of the compressive behaviour of two SiC ceramics, Mechanics of Materials, vol.35, issue.10, pp.987-1002, 2003.
DOI : 10.1016/S0167-6636(02)00321-6

P. Forquin and B. Erzar, Dynamic fragmentation process in concrete under impact and spalling tests, International Journal of Fracture, vol.37, issue.9, pp.193-215, 2009.
DOI : 10.1007/978-94-011-9055-8

P. Forquin and F. Hild, Dynamic Fragmentation of an Ultrahigh-Strength Concrete during Edge-On Impact Tests, Journal of Engineering Mechanics, vol.134, issue.4, pp.302-315, 2008.
DOI : 10.1061/(ASCE)0733-9399(2008)134:4(302)

URL : https://hal.archives-ouvertes.fr/hal-00322193

P. Forquin and F. Hild, A Probabilistic Damage Model of the Dynamic Fragmentation Process in Brittle Materials, Advances in Applied Mech, pp.1-72, 2010.
DOI : 10.1016/S0065-2156(10)44001-6

URL : https://hal.archives-ouvertes.fr/hal-00521184

P. Forquin, L. Tran, P. Louvigné, L. Rota, and F. Hild, Effect of aluminum reinforcement on the dynamic fragmentation of SiC ceramics, International Journal of Impact Engineering, vol.28, issue.10, pp.1061-1076, 2003.
DOI : 10.1016/S0734-743X(03)00034-4

URL : https://hal.archives-ouvertes.fr/hal-00002909

R. Fowles and R. F. Williams, Plane Stress Wave Propagation in Solids, Journal of Applied Physics, vol.6, issue.1, pp.360-363, 1970.
DOI : 10.1088/0508-3443/15/6/320

L. Gorjan and M. Ambrozic, Bend strength of alumina ceramics: A comparison of Weibull statistics with other statistics based on very large experimental data set, Journal of the European Ceramic Society, vol.32, issue.6, pp.1221-1227, 2012.
DOI : 10.1016/j.jeurceramsoc.2011.12.010

D. E. Grady, The spall strength of condensed matter, Journal of the Mechanics and Physics of Solids, vol.36, issue.3, pp.353-383, 1988.
DOI : 10.1016/0022-5096(88)90015-4

D. E. Grady, SHOCK-WAVE PROPERTIES OF HIGH-STRENGTH CERAMICS, Shock Compression of Condensed Matter, pp.455-458, 1992.
DOI : 10.1016/B978-0-444-89732-9.50103-5

D. E. Grady, Shock-wave properties of high-strength ceramics Constitutive laws : Experiment and numerical implementation, pp.35-45, 1995.

D. E. Grady, Shock-wave compression of brittle solids, Mechanics of Materials, vol.29, issue.3-4, pp.181-203, 1998.
DOI : 10.1016/S0167-6636(98)00015-5

D. E. Grady, Shock profile studies on selected silicon carbide ceramics with application to dynamic yield mechanisms, AIP Conference Proceedings, pp.629-632, 1999.
DOI : 10.1063/1.1303552

D. E. Grady and M. E. Kipp, Continuum modelling of explosive fracture in oil shale, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.17, issue.3, pp.147-157, 1980.
DOI : 10.1016/0148-9062(80)91361-3

D. E. Grady and R. L. Moody, Shock compression profiles in ceramics, 1996.
DOI : 10.2172/211375

S. Grange, P. Forquin, S. Mencacci, and F. Hild, On the dynamic fragmentation of two limestones using edge-on impact tests, International Journal of Impact Engineering, vol.35, issue.9, pp.977-991, 2008.
DOI : 10.1016/j.ijimpeng.2007.07.006

URL : https://hal.archives-ouvertes.fr/hal-00322192

D. J. Grove and A. M. Rajendran, Effects of pulverized material strength on penetration resistance of ceramic targets, AIP Conference Proceedings, pp.1143-1146, 1996.
DOI : 10.1063/1.50860

W. H. Gust and E. B. Royce, Ceramics, Journal of Applied Physics, vol.13, issue.1, pp.276-295, 1971.
DOI : 10.1063/1.1658272

H. Manoj-simha, C. Bless, S. J. Bedford, and A. , Computational modeling of the penetration response of a high-purity ceramic, International Journal of Impact Engineering, vol.27, issue.1, pp.65-86, 2002.
DOI : 10.1016/S0734-743X(01)00036-7

D. Hayes, Backward integration of the equations of motion to correct for free surface perturbations, 2001.
DOI : 10.2172/783087

S. Hayun, V. Paris, R. Mitrani, S. Kalabukhov, M. P. Dariel et al., Microstructure and mechanical properties of silicon carbide processed by Spark Plasma Sintering (SPS), Ceramics International, vol.38, issue.8, pp.6335-6340, 2012.
DOI : 10.1016/j.ceramint.2012.05.003

P. J. Hazell, Ceramic Armour, 2006.
DOI : 10.1201/b18683-8

P. J. Hazell and M. J. Iremonger, Crack softening damage model for ceramic impact and its application within a hydrocode, Journal of Applied Physics, vol.33, issue.3, 1088.
DOI : 10.1016/0020-7683(95)00110-7

P. J. Hazell, C. J. Roberson, and M. Moutinho, The design of mosaic armour: The influence of tile size on ballistic performance, Materials & Design, vol.29, issue.8, pp.1497-1503, 2008.
DOI : 10.1016/j.matdes.2008.03.003

U. Hornemann, J. F. Kalthoff, H. Rothenhausler, H. Senf, and S. Winkler, Experimental investigation of wave and fracture propagation in glass -Slabs loaded by steel cylinders at high impact velocities, Tech. Rep. E Weil am Rhein, vol.484, 1984.

P. L. Héreil, Mesure et exploitation de profils de vitesse matérielle pour l'étude du comportement sous choc des matériaux solides, 1986.

P. L. Héreil and G. Avrillaud, Dynamic material characterization under ramp wave compression with GEPI device, Journal de Physique IV (Proceedings), vol.134, pp.535-540, 2006.
DOI : 10.1051/jp4:2006134082

B. J. Jensen, D. B. Holtkamp, P. A. Rigg, and D. H. Dolan, Accuracy limits and window corrections for photon Doppler velocimetry, Journal of Applied Physics, vol.93, issue.1, pp.1-10, 2007.
DOI : 10.1063/1.325959

G. R. Johnson and W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, pp.541-547, 1983.

G. R. Johnson and T. J. Holmquist, A computational constitutive model for brittle materials subjected to large strains, 1990.

. Dans, M. A. Meyers, L. E. Murr, and K. P. Staudhammer, Shock-wave and high-strain-rate phenomena in materials -Proceedings of EXPLOMET 90, pp.1075-1081

G. R. Johnson and T. J. Holmquist, An improved computational constitutive model for brittle materials, AIP Conference Proceedings, 1993.
DOI : 10.1063/1.46199

G. R. Johnson, T. J. Holmquist, and S. R. Beissel, Response of aluminum nitride (including a phase change) to large strains, 2003.

M. F. Kanninen and C. H. Popelar, Advanced fracture mechanics, 1985.

O. Keita, C. Dascalu, and B. François, A two-scale model for dynamic damage evolution, Journal of the Mechanics and Physics of Solids, vol.64, pp.170-183, 2014.
DOI : 10.1016/j.jmps.2013.11.003

URL : https://hal.archives-ouvertes.fr/hal-01667113

M. E. Kipp and D. E. Grady, Shock compression and release in high-strength ceramics, AIP conference proceedings, Shock Compression of Condensed Matter, 1989.
DOI : 10.2172/5777672

R. W. Klopp and D. A. Shockey, The strength behavior of granulated silicon carbide at high strain rates and confining pressure, Journal of Applied Physics, vol.5, issue.3, pp.7318-7326, 1991.
DOI : 10.1017/S0022112073000194

A. Krell and E. Strassburger, Order of influences on the ballistic resistance of armor ceramics and single crystals, Materials Science and Engineering: A, vol.597, pp.1-32, 2013.
DOI : 10.1016/j.msea.2013.12.101

J. Lankford, Compressive strength and microplasticity in polycrystalline alumina, Journal of Materials Science, vol.59, issue.4, pp.791-796, 1977.
DOI : 10.1007/BF00548172

J. Lankford, Temperature-strain rate dependance of compressive strength and damage mechanisms in aluminium oxide, Journal of Materials Science, vol.62, issue.6, pp.1567-1578, 1981.
DOI : 10.2472/jsms.20.164

J. Lankford, W. W. Predebon, J. M. Staehler, G. Subhash, B. J. Pletka et al., The role of plasticity as a limiting factor in the compressive failure of high strength ceramics, Mechanics of Materials, vol.29, issue.3-4, pp.205-218, 1998.
DOI : 10.1016/S0167-6636(98)00023-4

D. E. Larson, Explosive energy coupling in geologic materials, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol.19, issue.4, pp.157-166, 1982.
DOI : 10.1016/0148-9062(82)90886-5

A. Lefrançois, P. Y. Chanal, L. Blanc, G. Petit, J. Avrillaud et al., High-Velocity Flyer-Plate Developments on Two High-Pulsed-Power Generators Based on a Strip-Line Design (GEPI and CEPAGE), IEEE Transactions on Plasma Science, vol.39, issue.1, 2011.
DOI : 10.1109/TPS.2010.2081382

L. Louro, L. H. Meyers, and M. A. , Effect of stress state and microstructural parameters on impact damage of alumina-based ceramics, Journal of Materials Science, vol.1, issue.7, pp.2516-2532, 1989.
DOI : 10.1007/BF01174523

L. Louro, L. H. Meyers, and M. A. , Stress-wave induced fragmentation in alumina-based ceramics, Shock Compression of Condensed Matter, 1989.

F. Longy, Déformation et endommagement de céramiques soumises à un choc intense : aspects macro et micromécaniques, 1987.

F. Longy and J. Cagnoux, Plasticity and Microcracking in Shock-Loaded Alumina, Journal of the American Ceramic Society, vol.6, issue.2, 1989.
DOI : 10.1111/j.1151-2916.1989.tb06254.x

J. López-puente, A. Arias, R. Zaera, and C. Navarro, The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study, International Journal of Impact Engineering, vol.32, issue.1-4, pp.1-4, 2005.
DOI : 10.1016/j.ijimpeng.2005.07.014

L. H. Louro, Stress-wave induced damage in alumina-based ceramics, of mining and technology, 1988.

V. Madhu, K. Ramanjaneyulu, T. Balakrishna-bhat, and N. K. Gupta, An experimental study of penetration resistance of ceramic armour subjected to projectile impact, International Journal of Impact Engineering, vol.32, issue.1-4, pp.337-350, 2005.
DOI : 10.1016/j.ijimpeng.2005.03.004

F. Malaise, Réponse d'une céramique à l'impact d'un barreau à grande vitesse (1500 m/s) Croisement essais dynamiques-modélisation numérique, 1999.

C. Mangeant, F. Lassalle, P. L-'eplattenier, P. L. Héreil, D. Bergues et al., SYRINX Project: HPP Generators Devoted to Isentropic Compression Experiments, AIP Conference Proceedings, pp.1173-1176, 2001.
DOI : 10.1063/1.1483746

S. R. Martin, Effect of porosity distribution on the fragmentation behaviour of impacted ceramics, 2004.

E. Medvedovski, Ballistic performance of armour ceramics: Influence of design and structure. Part 1, Ceramics International, vol.36, issue.7, pp.2103-2115, 2010.
DOI : 10.1016/j.ceramint.2010.05.021

M. A. Meyers, Dynamic behavior of materials, 1994.
DOI : 10.1002/9780470172278

J. C. Millett, N. K. Bourne, and D. P. Dandekar, Delayed failure in a shockloaded silicon carbide, J. Appl. Phys, pp.97-98, 2005.

A. K. Mukhopadhyay, K. D. Joshi, A. Dey, R. Chakraborty, A. K. Mandal et al., Electron microscopy of shock deformation in alumina, Ceramics International, vol.37, issue.7, pp.2365-2376, 2011.
DOI : 10.1016/j.ceramint.2011.03.034

Z. Munir and D. Quach, Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process, Journal of the American Ceramic Society, vol.20, issue.[4], pp.1-19, 2011.
DOI : 10.1002/adma.200700715

D. E. Munson and R. J. Lawrence, Dynamic deformation of polycrystalline alumina, Journal of Applied Physics, vol.64, issue.10, pp.6272-6282, 1979.
DOI : 10.1016/0001-6160(57)90164-5

N. H. Murray, N. K. Bourne, and Z. Rosenberg, The dynamic compressive strength of aluminas, Journal of Applied Physics, vol.20, issue.9, pp.4866-4871, 1998.
DOI : 10.1063/1.1661464

N. H. Murray, N. K. Bourne, Z. Rosenberg, and J. E. Field, The spall strength of alumina ceramics, Journal of Applied Physics, vol.12, issue.2, pp.734-738, 1998.
DOI : 10.1098/rspa.1994.0106

S. Nemat-nasser and M. Hori, Void collapse and void growth in crystalline solids, Journal of Applied Physics, vol.1, issue.7, 1987.
DOI : 10.1016/0167-6636(82)90017-5

M. J. Normandia, J. C. Lasalvia, W. A. Gooch-jr, J. W. Mccauley, and A. M. Rajendran, Protecting the future force : Ceramics research leads to improved armor performance. The Amptiac Quaterly, 2004.

S. A. Novikov, I. I. Divnov, and A. G. Ivanov, The study of fracture of steel, aluminium and copper under explosive loading. Fizika Metallov I Metallovedeniye 21, 1966.

E. K. Oberg, C. S. Dunleavy, P. Bourke, and T. W. Clyne, Electrical monitoring of crack propagation during quasi-static loading and ballistic impact of alumina plates, Journal of the European Ceramic Society, vol.33, issue.13-14, pp.2663-2675, 2013.
DOI : 10.1016/j.jeurceramsoc.2013.04.013

R. M. Ogorkiewicz, Technology of Tanks. Jane's Information Group, Could- son, 1991.

B. Paliwal and K. T. Ramesh, An interacting micro-crack damage model for failure of brittle materials under compression, Journal of the Mechanics and Physics of Solids, vol.56, issue.3, pp.896-923, 2008.
DOI : 10.1016/j.jmps.2007.06.012

V. Paris, N. Frage, M. P. Dariel, and E. Zaretsky, The spall strength of silicon carbide and boron carbide ceramics processed by spark plasma sintering, International Journal of Impact Engineering, vol.37, issue.11, 2010.
DOI : 10.1016/j.ijimpeng.2010.06.008

N. J. Petch, The cleavage strength of polycrystals, J. Iron Steel Inst, vol.174, issue.1, pp.25-28, 1953.

J. Petit, Y. A. Alexeev, S. P. Ananiev, and M. N. Kazeev, The Electromagnetic Cylindrical Compression : A Tool to Test Behavior Modeling under Large Strain at High Strain Rate, Le Journal de Physique IV, vol.07, issue.C3, pp.3-7, 1997.
DOI : 10.1051/jp4:1997321

URL : https://hal.archives-ouvertes.fr/jpa-00255478

J. Petit and J. L. Dequiedt, Constitutive relations for copper under shock wave loading: Twinning activation, Mechanics of Materials, vol.38, issue.3, pp.173-185, 2006.
DOI : 10.1016/j.mechmat.2005.06.005

I. M. Pickup and A. K. Barker, Deviatoric strength of silicon carbide subject to shock, AIP Conference Proceedings, pp.573-576, 1999.
DOI : 10.1063/1.1303539

S. Poisson, Recherches sur la probabilité des jugements en matière criminelle et en matière civile précédées des ràgles générales du calcul des probabilités, 1838.

J. P. Ponsonnaille and P. L. Héreil, Soft Recovery Device For Shocked Brittle Materials, Le Journal de Physique IV, vol.07, issue.C3, pp.289-294, 1997.
DOI : 10.1051/jp4:1997351

URL : https://hal.archives-ouvertes.fr/jpa-00255508

. Qinetiq, Brochure -LAST armor, add-on armor for tactical ground vehicles

G. Raiser, R. J. Clifton, and M. Ortiz, A soft-recovery plate impact experiment for studying microcracking in ceramics, Mechanics of Materials, vol.10, issue.1-2, pp.43-58, 1990.
DOI : 10.1016/0167-6636(90)90016-9

G. F. Raiser, J. L. Wise, R. J. Clifton, D. E. Grady, and D. E. Cox, Plate impact response of ceramics and glasses, Journal of Applied Physics, vol.96, issue.8, pp.75-3862, 1994.
DOI : 10.1557/JMR.1992.0973

A. M. Rajendran, High strain rate behavior of metals, ceramics, and concrete, 1992.

. Tech and . Rep, WL-TR-92-4006

A. M. Rajendran, Modeling the impact behavior of AD85 ceramic under multiaxial loading, International Journal of Impact Engineering, vol.15, issue.6, pp.749-768, 1994.
DOI : 10.1016/0734-743X(94)90033-H

A. M. Rajendran and D. J. Grove, Modeling the shock response of silicon carbide, boron carbide and titanium diboride, International Journal of Impact Engineering, vol.18, issue.6, pp.611-631, 1996.
DOI : 10.1016/0734-743X(96)89122-6

D. Ray, R. Flinders, A. Anderson, and R. Cutler, Effect of Room-Temperature Hardness and Toughness on the Ballistic Performance of SiC-Based Ceramics, Ceram . Sci. Eng. Proc, vol.26, issue.7, pp.131-142, 2005.
DOI : 10.1002/9780470291276.ch16

J. S. Reed, Introduction to the Principles of Ceramic Processing, 1988.

P. Riou, Etude de l'endommagement du carbure de silicium (sic) lors d'un impact de basse énergie. Application aux blindages, 1996.

P. Riou, C. Denoual, and C. E. Cottenot, Visualization of the damage evolution in impacted silicon carbide ceramics, International Journal of Impact Engineering, vol.21, issue.4, pp.225-235, 1998.
DOI : 10.1016/S0734-743X(97)00018-3

C. J. Roberson, Ceramic materials and their use in lightweight armour systems . Dans : Lightweight armour system symposium, Royal Military College of Science, 1995.

Z. Rosenberg, D. Yaziv, Y. Yeshurun, and S. J. Bless, Shear strength of shock???loaded alumina as determined with longitudinal and transverse manganin gauges, Journal of Applied Physics, vol.56, issue.3, pp.1120-1122, 1987.
DOI : 10.1063/1.333737

Z. Rosenberg and Y. Yeshurun, The relation between ballastic efficiency and compressive strength of ceramic tiles, International Journal of Impact Engineering, vol.7, issue.3, pp.357-362, 1988.
DOI : 10.1016/0734-743X(88)90035-8

Z. Rosenberg, Y. Yeshurun, S. J. Bless, and K. Okajima, A new definition of ballistic efficiency of brittle materials based on the use of thick backing plates, 1988.

. Dans, Impact loading and dynamic behaviour of materials, DGM Informationsgesellschaft mbH, pp.491-498

Z. Rosenberg, Y. Yeshurun, and D. G. Brandon, DYNAMIC RESPONSE AND MICROSTRUCTURE OF COMMERCIAL ALUMINA, Le Journal de Physique Colloques, vol.46, issue.C5, pp.331-341, 1985.
DOI : 10.1051/jphyscol:1985542

URL : https://hal.archives-ouvertes.fr/jpa-00224773

P. Rossi, X. Wu, L. Maou, F. Belloc, and A. , Scale effect on concrete in tension, Materials and Structures, vol.17, issue.8, pp.437-444, 1994.
DOI : 10.1007/BF02473447

G. Rossiquet, Carbure de silicium pour application blindage : élaboration et étude du comportement à l'impact, 2012.

S. D. Rothman and J. Maw, Characteristics analysis of Isentropic Compression Experiments (ICE), Journal de Physique IV (Proceedings), vol.134, pp.745-750, 2006.
DOI : 10.1051/jp4:2006134115

J. W. Rudnicki and J. R. Rice, Conditions for the localization of deformation in pressure-sensitive dilatant materials, Journal of the Mechanics and Physics of Solids, vol.23, issue.6, pp.371-394, 1975.
DOI : 10.1016/0022-5096(75)90001-0

L. Seaman, Lagrangian analysis for multiple stress or velocity gages in attenuating waves, Journal of Applied Physics, vol.45, issue.10, pp.4303-4314, 1974.
DOI : 10.1029/JB078i008p01299

V. Sharma, S. Nemat-nasser, and K. S. Vecchio, Effect of Grain-Boundary Phase on Dynamic Compression Fatigue in Hot-Pressed Silicon Nitride, Journal of the American Ceramic Society, vol.58, issue.7-8, pp.129-139, 1998.
DOI : 10.1111/j.1460-2695.1992.tb01303.x

J. H. She and K. Ueno, Effect of additive content on liquid-phase sintering on silicon carbide ceramics, Materials Research Bulletin, vol.34, issue.10-11, pp.1629-1636, 1999.
DOI : 10.1016/S0025-5408(99)00172-5

C. J. Shih, M. A. Meyers, V. F. Nesterenko, and S. J. Chen, Damage evolution in dynamic deformation of silicon carbide, Acta Materialia, vol.48, issue.9, pp.2399-2420, 2000.
DOI : 10.1016/S1359-6454(99)00409-7

J. M. Staehler, W. W. Predebon, B. J. Pletka, and G. Subhash, Micromechanisms of deformation in high-purity hot-pressed alumina, Materials Science and Engineering: A, vol.291, issue.1-2, pp.37-45, 2000.
DOI : 10.1016/S0921-5093(00)00976-X

D. J. Steinberg, Equation of state and strength properties of selected metals, 1991.

E. Strassburger, P. Patel, J. W. Mccauley, and D. W. Templeton, Visualization of wave propagation and impact damage in a polycrystalline transparent ceramic -AlON, Proceedings of the 22nd International Symposium on Ballistics, 2005.

E. Strassburger and H. Senf, Experimental investigations of wave and fracture phenomena in impacted ceramics and glasses, 1995.

S. Sundaram and R. J. Clifton, The influence of a glassy phase on the high strain rate response of a ceramic, Mechanics of Materials, vol.29, issue.3-4, pp.233-251, 1998.
DOI : 10.1016/S0167-6636(98)00017-9

J. Y. Tranchet, Comportement de deux matériaux fragiles polycristallins sous l'effet de la propagation d'une onde sphérique divergente, 1994.

R. E. Tressler, An assessment of low cost manufacturing technology for advanced structural ceramics and its impact on ceramic armor. Dans : Ceramic Armor Materials by Design. The American Ceramic Society, pp.451-462, 2001.

T. J. Vogler, W. D. Reinhart, and L. C. Chhabildas, Dynamic behavior of boron carbide, Journal of Applied Physics, vol.54, issue.8, pp.95-4173, 2004.
DOI : 10.1103/PhysRevB.59.13672

T. J. Vogler, W. D. Reinhart, L. C. Chhabildas, and D. P. Dandekar, Hugoniot and strength behavior of silicon carbide, Journal of Applied Physics, vol.78, issue.2, pp.1-15, 2006.
DOI : 10.1063/1.1663148

W. Weibull, A statistical theory of the strength of materials, Roy. Swed. Inst. Eng. Res, vol.151, 1939.

W. Weibull, A statistical distribution function of wide applicability, ASME J. Appl. Mech, vol.18, pp.293-297, 1951.

M. L. Wilkins, Third progress report of light armor program, 1968.

M. L. Wilkins, Fourth progress report of light armor program, 1969.
DOI : 10.2172/4173151

W. Winkler and A. J. Stilp, Spallation behavior of TiB 2 , SiC, and B 4 C under planar impact tensile stress, AIP conference proceedings, Shock Compression of Condensed Matter, pp.475-478, 1991.

L. Woodward and B. Baxter, Ballistic evaluation of ceramics: Influence of test conditions, International Journal of Impact Engineering, vol.15, issue.2, pp.119-124, 1994.
DOI : 10.1016/S0734-743X(05)80024-7

Y. Yeshurun, D. G. Brandon, and Z. Rosenberg, Impact damage mechanisms in debased alumina. Dans : Impact loading and dynamic behaviour of materials, pp.399-405, 1987.

Y. Yeshurun, D. G. Brandon, A. Venkert, and Z. Rosenberg, THE DYNAMIC PROPERTIES OF TWO-PHASE ALUMINA/GLASS CERAMICS, Le Journal de Physique Colloques, vol.49, issue.C3, pp.11-18, 1988.
DOI : 10.1051/jphyscol:1988302

URL : https://hal.archives-ouvertes.fr/jpa-00227718

Y. Yeshurun, Z. Rosenberg, D. G. Brandon, and N. A. Travitzky, Effect of heat treatment on the dynamic response of commercial 85 wt.% Al2O3, Materials Science and Engineering, vol.71, pp.71-75, 1985.
DOI : 10.1016/0025-5416(85)90208-3

H. N. Yoshimura, A. L. Molisani, N. E. Narita, P. F. Cesar, and H. Goldenstein, Porosity dependence of elastic constants in aluminum nitride ceramics, Materials Research, vol.28, issue.8, pp.127-133, 2007.
DOI : 10.1007/BF00367582

P. D. Zavattieri, P. V. Raghuram, and H. D. Espinosa, A computational model of ceramic microstructures subjected to multi-axial dynamic loading, Journal of the Mechanics and Physics of Solids, vol.49, issue.1, pp.27-68, 2001.
DOI : 10.1016/S0022-5096(00)00028-4

K. S. Zhang, D. Zhang, R. Feng, and M. S. Wu, Microdamage in polycristalline ceramics under dynamic compression and tension, J. Appl. Phys, pp.98-99, 2005.

J. L. Zinszner, P. Forquin, and G. Rossiquet, Design of an experimental configuration for studying the dynamic fragmentation of ceramics under impact, The European Physical Journal Special Topics, vol.316, issue.1, pp.107-115, 2012.
DOI : 10.1016/S0022-3093(02)01936-1

URL : https://hal.archives-ouvertes.fr/hal-00933986

J. L. Zinszner, P. Forquin, and G. Rossiquet, Experimental and numerical analysis of the dynamic fragmentation in a SiC ceramic under impact, International Journal of Impact Engineering, vol.76, pp.9-19, 2015.
DOI : 10.1016/j.ijimpeng.2014.07.007

URL : https://hal.archives-ouvertes.fr/hal-01308129