W. Y. Hsu, T. D. Gierke, and . Ion, Ion transport and clustering in nafion perfluorinated membranes, Journal of Membrane Science, vol.13, issue.3, pp.307-326, 1983.
DOI : 10.1016/S0376-7388(00)81563-X

J. P. Corriou, Thermodynamique chimique ? Equilibres thermodynamiques-, Techniques de l'ingénieur, pp.1028-1029, 1985.

T. E. Springer, T. A. Zawodzinski, and S. Gottesfeld, Polymer Electrolyte Fuel Cell Model, Journal of The Electrochemical Society, vol.138, issue.8, pp.2334-2342, 1991.
DOI : 10.1149/1.2085971

URL : http://jes.ecsdl.org/content/138/8/2334.full.pdf

Z. Lukacs, The numerical evaluation of the distortion of EIS data due to the distribution of parameters, Journal of Electroanalytical Chemistry, vol.432, issue.1-2, pp.79-83, 1997.
DOI : 10.1016/S0022-0728(97)00217-9

M. Sluyters-rehbach, Impedances of electrochemical systems: Terminology, nomenclature and representation - Part I: Cells with metal electrodes and liquid solutions (IUPAC Recommendations 1994), Pure and Applied Chemistry, vol.66, issue.9, pp.1831-1891, 1994.
DOI : 10.1351/pac199466091831

J. T. Hinatsu, M. Mizuhata, and H. Takenaka, Water Uptake of Perfluorosulfonic Acid Membranes from Liquid Water and Water Vapor, Journal of The Electrochemical Society, vol.141, issue.6, pp.1493-1498, 1994.
DOI : 10.1149/1.2054951

D. Chu and R. Jiang, Comparative studies of polymer electrolyte membrane fuel cell stack and single cell, Journal of Power Sources, vol.80, issue.1-2, pp.226-234, 1999.
DOI : 10.1016/S0378-7753(98)00263-8

D. Chu and R. Jiang, Performance of polymer electrolyte membrane fuel cell (PEMFC) stacks, Journal of Power Sources, vol.83, issue.1-2, pp.128-133, 1999.
DOI : 10.1016/S0378-7753(99)00285-2

J. Zhang, Y. Tang, C. Song, Z. Xia, H. Li et al., PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures, Electrochimica Acta, vol.53, issue.16, pp.5315-5321, 2008.
DOI : 10.1016/j.electacta.2008.02.074

M. M. Saleh, T. Okajima, M. Hayase, and F. Kitamura, Exploring the effects of symmetrical and asymmetrical relative humidity on the performance of H2/air PEM fuel cell at different temperatures, Journal of Power Sources, vol.164, issue.2, pp.503-509, 2007.
DOI : 10.1016/j.jpowsour.2006.11.065

M. Amirinejad, S. Rowshanzamir, and M. H. Eikani, Effects of operating parameters on performance of a proton exchange membrane fuel cell, Journal of Power Sources, vol.161, issue.2, pp.872-875, 2006.
DOI : 10.1016/j.jpowsour.2006.04.144

C. Y. Wang, Fundamental Models for Fuel Cell Engineering, Chemical Reviews, vol.104, issue.10, p.4727, 2004.
DOI : 10.1021/cr020718s

T. E. Springer, T. A. Zawodzinski, and S. Gottesfeld, Polymer Electrolyte Fuel Cell Model, Journal of The Electrochemical Society, vol.138, issue.8, p.2334, 1991.
DOI : 10.1149/1.2085971

URL : http://jes.ecsdl.org/content/138/8/2334.full.pdf

F. Meier and G. Eigenberger, Transport parameters for the modelling of water transport in ionomer membranes for PEM-fuel cells, Electrochimica Acta, vol.49, issue.11, p.1731, 2004.
DOI : 10.1016/j.electacta.2003.12.004

A. Z. Weber and J. Newman, Transport in Polymer-Electrolyte Membranes, Journal of The Electrochemical Society, vol.69, issue.137, p.1008, 2003.
DOI : 10.1016/0376-7388(92)80176-K

A. Z. Weber and J. Newman, Transport in Polymer-Electrolyte Membranes, Journal of The Electrochemical Society, vol.150, issue.2, p.326, 2004.
DOI : 10.1149/1.1545455

A. Z. Weber and J. Newman, Transport in Polymer-Electrolyte Membranes, Journal of The Electrochemical Society, vol.3, issue.2, p.311, 2004.
DOI : 10.1021/ma60015a020

K. T¨uber, D. P´ocza, and C. Hebling, Visualization of water buildup in the cathode of a transparent PEM fuel cell, Journal of Power Sources, vol.124, issue.2, p.403, 2003.
DOI : 10.1016/S0378-7753(03)00797-3

X. G. Yang, F. Y. Zhang, A. L. Lubawy, and C. Y. Wang, Visualization of Liquid Water Transport in a PEFC, Electrochemical and Solid-State Letters, vol.151, issue.11, p.408, 2004.
DOI : 10.1149/1.1803051

H. Abe, K. Shima, Y. Watanabe, and . Ito, Study of PEFCs by AC Impedance, Current Interrupt, and Dew Point Measurements, Journal of The Electrochemical Society, vol.144, issue.1, p.101, 2004.
DOI : 10.1149/1.1837940

Y. Cai, J. Hu, H. Ma, B. Yi, and H. Zhang, Effect of water transport properties on a PEM fuel cell operating with dry hydrogen, Electrochimica Acta, vol.51, issue.28, pp.6361-6366, 2006.
DOI : 10.1016/j.electacta.2006.04.043

S. Shimpalee, S. Greenway, D. Spuckler, V. Zee, and J. Predicting, Predicting water and current distributions in a commercial-size PEMFC, Journal of Power Sources, vol.135, issue.1-2, pp.79-87, 2004.
DOI : 10.1016/j.jpowsour.2004.03.059

S. Shimpalee, S. Greenway, and J. Van-zee, The impact of channel path length on PEMFC flow-field design, Journal of Power Sources, vol.160, issue.1, pp.398-406, 2006.
DOI : 10.1016/j.jpowsour.2006.01.099

T. A. Nguyen, A Gas Distributor Design for Proton-Exchange-Membrane Fuel Cells, Journal of The Electrochemical Society, vol.143, issue.5, pp.103-108, 1996.
DOI : 10.1149/1.1836666

A. Su, F. Weng, C. Hsu, and Y. Chen, Studies on flooding in PEM fuel cell cathode channels, International Journal of Hydrogen Energy, vol.31, issue.8, pp.1031-1040, 2006.
DOI : 10.1016/j.ijhydene.2005.12.019

A. Su, Y. Chiu, and Y. Weng, The impact of flow field pattern on concentration and performance in PEMFC, International Journal of Energy Research, vol.140, issue.5, pp.409-434
DOI : 10.1002/er.1059

W. Yan, H. Liu, C. Soong, F. Chen, and C. Cheng, Numerical study on cell performance and local transport phenomena of PEM fuel cells with novel flow field designs, Journal of Power Sources, vol.161, issue.2, pp.907-926, 2006.
DOI : 10.1016/j.jpowsour.2006.05.007

H. Liu, W. Yan, C. Soong, F. Chen, and H. Chu, Reactant gas transport and cell performance of proton exchange membrane fuel cells with tapered flow field design, Journal of Power Sources, vol.158, issue.1, pp.78-87, 2006.
DOI : 10.1016/j.jpowsour.2005.09.017

S. Karvonen, T. Hottinen, J. Saarinen, and O. Himanen, Modeling of flow field in polymer electrolyte membrane fuel cell, Journal of Power Sources, vol.161, issue.2, pp.876-84, 2006.
DOI : 10.1016/j.jpowsour.2006.04.145

J. Scholta, G. Escher, W. Zhang, L. Kuppers, L. Jorissen et al., Investigation on the influence of channel geometries on PEMFC performance, Journal of Power Sources, vol.155, issue.1, pp.66-71, 2006.
DOI : 10.1016/j.jpowsour.2005.05.099

S. Um and C. Wang, Three-dimensional analysis of transport and electrochemical reactions in polymer electrolyte fuel cells, Journal of Power Sources, vol.125, issue.1, pp.40-51, 2004.
DOI : 10.1016/j.jpowsour.2003.07.007

G. Hu, J. Fan, S. Chen, Y. Liu, and K. Cen, Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields, Journal of Power Sources, vol.136, issue.1, pp.1-9, 2004.
DOI : 10.1016/j.jpowsour.2004.05.010

. Quintech, Catalog ? Research and Development ?, p.31, 2004.

T. E. Springer, T. A. Zawodzinski, and S. Gottesfeld, Polymer Electrolyte Fuel Cell Model, Journal of The Electrochemical Society, vol.138, issue.8, pp.2334-2342, 1991.
DOI : 10.1149/1.2085971

URL : http://jes.ecsdl.org/content/138/8/2334.full.pdf

P. Futerko and I. M. Hsing, Two-dimensional finite-element method study of the resistance of membranes in polymer electrolyte fuel cells, Electrochimica Acta, vol.45, issue.11, pp.1741-1751, 2000.
DOI : 10.1016/S0013-4686(99)00394-1

A. Rowe and X. Li, Mathematical modeling of proton exchange membrane fuel cells, Journal of Power Sources, vol.102, issue.1-2, pp.82-96, 2001.
DOI : 10.1016/S0378-7753(01)00798-4

C. L. Gardner and A. V. Anantaraman, Measurement of membrane conductivities using an open-ended coaxial probe, Journal of Electroanalytical Chemistry, vol.395, issue.1-2, pp.67-73, 1995.
DOI : 10.1016/0022-0728(95)04072-V

F. N. Büchi and G. G. Scherer, In-situ resistance measurements of Nafion?? 117 membranes in polymer electrolyte fuel cells, Journal of Electroanalytical Chemistry, vol.404, issue.1, pp.37-43, 1996.
DOI : 10.1016/0022-0728(95)04321-7

Y. Sone, P. Ekdunge, and D. Simonsson, Proton Conductivity of Nafion 117 as Measured by a Four-Electrode AC Impedance Method, Journal of The Electrochemical Society, vol.143, issue.4, pp.1254-1259, 1996.
DOI : 10.1149/1.1836625

T. Thampan, S. Malhotra, H. Tang, and R. Datta, Modeling of Conductive Transport in Proton-Exchange Membranes for Fuel Cells, Journal of The Electrochemical Society, vol.147, issue.9, pp.3242-3250, 2000.
DOI : 10.1149/1.1393890

K. Tüber, D. P´ocza, and C. Hebling, Visualization of water buildup in the cathode of a transparent PEM fuel cell, Journal of Power Sources, vol.124, issue.2, pp.403-414, 2003.
DOI : 10.1016/S0378-7753(03)00797-3

A. Hakenjos, H. Muenter, U. Wittstadt, and C. Hebling, A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding, Journal of Power Sources, vol.131, issue.1-2, pp.213-216, 2004.
DOI : 10.1016/j.jpowsour.2003.11.081

J. Stumper, M. Lohr, and S. Hamada, Diagnostic tools for liquid water in PEM fuel cells, Journal of Power Sources, vol.143, issue.1-2, pp.150-157, 2005.
DOI : 10.1016/j.jpowsour.2004.11.036

G. Q. Lu and C. Y. Wang, Electrochemical and flow characterization of a direct methanol fuel cell, Journal of Power Sources, vol.134, issue.1, pp.33-40, 2004.
DOI : 10.1016/j.jpowsour.2004.01.055

G. Maranzana, O. Lottin, T. Colinart, S. Chupin, and S. Didierjean, A multi-instrumented polymer exchange membrane fuel cell: Observation of the in-plane non-homogeneities, Journal of Power Sources, vol.180, issue.2, pp.748-754, 2008.
DOI : 10.1016/j.jpowsour.2008.03.002

URL : https://hal.archives-ouvertes.fr/hal-00494964

K. B. Prater, Solid polymer fuel cells for transport and stationary applications, Journal of Power Sources, vol.61, issue.1-2, pp.105-109, 1996.
DOI : 10.1016/S0378-7753(96)02345-2

R. C. Makkus, A. H. Janssen, F. A. De-bruijn, and R. K. Mallant, Use of stainless steel for cost competitive bipolar plates in the SPFC, Journal of Power Sources, vol.86, issue.1-2, pp.86-274, 2000.
DOI : 10.1016/S0378-7753(99)00460-7

R. Blunk, M. Hassan-abd-elhamid, D. Lisi, and Y. Mikhail, Polymeric composite bipolar plates for vehicle applications, Journal of Power Sources, vol.156, issue.2, pp.151-157, 2006.
DOI : 10.1016/j.jpowsour.2005.04.041

P. H. Maheshwari, R. B. Mathur, and T. L. Dhami, Fabrication of high strength and a low weight composite bipolar plate for fuel cell applications, Journal of Power Sources, vol.173, issue.1, 2007.
DOI : 10.1016/j.jpowsour.2007.04.049

J. Jayaraj, Y. C. Kim, H. K. Seok, K. B. Kim, and E. Fleury, Development of metallic glasses for bipolar plate application, Materials Science and Engineering: A, vol.449, issue.451, pp.449-451, 2007.
DOI : 10.1016/j.msea.2006.02.238

D. P. Davies, P. L. Adcock, M. Turpin, and S. J. Rowen, Stainless steel as a bipolar plate material for solid polymer fuel cells, Journal of Power Sources, vol.86, issue.1-2, pp.237-242, 2000.
DOI : 10.1016/S0378-7753(99)00524-8

H. W. Wang, M. A. Sweikart, and J. A. Turner, Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells, Journal of Power Sources, vol.115, issue.2, pp.243-251, 2003.
DOI : 10.1016/S0378-7753(03)00023-5

R. C. Makkus, A. H. Janssen, F. A. De-bruijn, and R. K. Mallant, Stainless steel for cost-competitive bipolar plates in PEMFCs, Fuel Cells Bulletin, vol.3, issue.17, pp.17-22, 1999.
DOI : 10.1016/S1464-2859(00)87319-8

H. Tawfik, Y. Hung, and D. Mahajan, Metal bipolar plates for PEM fuel cell???A review, Journal of Power Sources, vol.163, issue.2, pp.755-767, 2007.
DOI : 10.1016/j.jpowsour.2006.09.088

J. S. Kim, W. H. Peelen, K. Hemmes, and R. C. Makkus, Effect of alloying elements on the contact resistance and the passivation behaviour of stainless steels, Corrosion Science, vol.44, issue.4, pp.44-635, 2002.
DOI : 10.1016/S0010-938X(01)00107-X

S. J. Lee, C. H. Huang, J. J. Lai, and Y. P. Chen, Corrosion-resistant component for PEM fuel cells, Journal of Power Sources, vol.131, issue.1-2, pp.131-162, 2004.
DOI : 10.1016/j.jpowsour.2004.01.008

A. Agneaux, M. H. Plouzennec, L. Antoni, and J. Granier, Corrosion Behaviour of Stainless Steel Plates in PEMFC Working Conditions, Fuel Cells, vol.115, issue.1, pp.47-53, 2006.
DOI : 10.1002/fuce.200500100

M. Li, S. Luo, C. Zeng, J. Shen, H. Lin et al., Corrosion behaviour of TiN coated type 316 stainless steel in simulated PEMFC environments, Corrosion Science, pp.46-1369, 2004.

E. A. Cho, U. S. Jeon, S. A. Hong, I. H. Oh, and S. G. Kang, Performance of a 1kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates, Journal of Power Sources, vol.142, issue.1-2, pp.177-183, 2005.
DOI : 10.1016/j.jpowsour.2004.10.032

Y. Wang and D. O. Northwood, Effects of O2 and H2 on the corrosion of SS316L metallic bipolar plate materials in simulated anode and cathode environments of PEM fuel cells, Electrochimica Acta, vol.52, issue.24, pp.6793-6798, 2007.
DOI : 10.1016/j.electacta.2007.05.001

R. Hornung and G. Kappelt, Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells, Journal of Power Sources, vol.72, issue.1, pp.20-21, 1998.
DOI : 10.1016/S0378-7753(97)02774-2

O. J. Murphy, A. Cisar, and E. Clarke, Low-cost light weight high power density PEM fuel cell stack, Electrochimica Acta, vol.43, issue.24, pp.3829-3840, 1998.
DOI : 10.1016/S0013-4686(98)00143-1

D. R. Hodgson, B. May, P. L. Adcock, and D. P. Davies, New lightweight bipolar plate system for polymer electrolyte membrane fuel cells, Journal of Power Sources, vol.96, issue.1, pp.96-233, 2001.
DOI : 10.1016/S0378-7753(01)00568-7

J. Wind, R. Späh, W. Kaiser, and G. Böhm, Metallic bipolar plates for PEM fuel cells, Journal of Power Sources, vol.105, issue.2, pp.256-260, 2002.
DOI : 10.1016/S0378-7753(01)00950-8

K. G. Huijsmans, R. C. Makkus, G. Rietveld, E. F. Sitters, and H. T. Reijers, An analysis of endurance issues for MCFC, Journal of Power Sources, vol.86, issue.1-2, pp.117-121, 2000.
DOI : 10.1016/S0378-7753(99)00448-6

H. Wang and J. A. Turner, SnO2:F coated ferritic stainless steels for PEM fuel cell bipolar plates, Journal of Power Sources, vol.170, issue.2, pp.387-394, 2007.
DOI : 10.1016/j.jpowsour.2007.04.028

S. T. Hong, S. Weil, and K. , Niobium-clad 304L stainless steel PEMFC bipolar plate material, Journal of Power Sources, vol.168, issue.2, pp.408-417, 2007.
DOI : 10.1016/j.jpowsour.2007.03.032

E. W. Brooman, Corrosion performance of environmentally acceptable alternatives to cadmium and chromium coatings: Chromium???Part II, Metal Finishing, vol.98, issue.8, pp.39-45, 2000.
DOI : 10.1016/S0026-0576(00)82740-3

A. Hamid and Z. , Electrodeposition of cobalt???tungsten alloys from acidic bath containing cationic surfactants, Materials Letters, vol.57, issue.16-17, pp.2558-2564, 2003.
DOI : 10.1016/S0167-577X(02)01311-3

F. Cosset, G. Contous, A. Célerier, and J. Machet, Deposition of corrosion-resistant chromium and nitrogen-doped chromium coatings by cathodic magnetron sputtering, Surface and Coatings Technology, vol.79, issue.1-3, pp.25-34, 1996.
DOI : 10.1016/0257-8972(95)02454-9

M. Donten, H. Cesiulis, and Z. Stojek, Electrodeposition of amorphous/nanocrystalline and polycrystalline Ni???Mo alloys from pyrophosphate baths, Electrochimica Acta, vol.50, issue.6, pp.1405-1412, 2005.
DOI : 10.1016/j.electacta.2004.08.028

N. Eliaz, T. M. Sridhar, and E. Gileadi, Synthesis and characterization of nickel tungsten alloys by electrodeposition, Electrochimica Acta, vol.50, issue.14, pp.2893-2904, 2005.
DOI : 10.1016/j.electacta.2004.11.038

T. France and S. A. , Le multiproduit Aciers, Métaux non ferreux, Plastiques, pp.1-1995

Y. P. Soulé, Manuel technique des aciers inoxydables

L. Wang, D. S. Kim, M. Kim, K. S. Nam, D. Chang et al., Microstructure of electroplated hard chromium coatings after plasma nitrocarburizing, Surface and Coatings Technology, vol.190, issue.2-3, pp.170-650, 2003.
DOI : 10.1016/j.surfcoat.2004.08.213

K. Nam, K. Lee, S. Kwon, D. Lee, and Y. Song, Improved wear and corrosion resistance of chromium (III) plating by oxynitrocarburisng and steam oxidation, Materials Letters, pp.58-3540, 2004.

H. Wang, J. A. Turner, X. N. Li, and R. Bhattacharya, SnO2:F coated austenite stainless steels for PEM fuel cell bipolar plates, Journal of Power Sources, vol.171, issue.2, pp.171-567, 2007.
DOI : 10.1016/j.jpowsour.2007.03.086

A. J. Bard and L. R. Faulkner, Electrochemical methods. Principles and applications, 1979.

M. D. Obradovic, G. Z. Bosnjadov, R. M. Stevanovic, M. D. Maksimovic, and A. R. Despic, Pulse and direct current plating of Ni???W alloys from ammonia???citrate electrolyte, Surface and Coatings Technology, vol.200, issue.14-15, pp.200-4201, 2006.
DOI : 10.1016/j.surfcoat.2004.12.013

A. Brenner, Electrodeposition of Alloys, Journal of The Electrochemical Society, vol.111, issue.2, 1963.
DOI : 10.1149/1.2426105

M. D. Obradovic, R. M. Stevanovic, and A. R. Despic, Electrochemical deposition of Ni???W alloys from ammonia???citrate electrolyte, Journal of Electroanalytical Chemistry, vol.552, pp.552-185, 2003.
DOI : 10.1016/S0022-0728(03)00151-7

I. Mizushina, P. T. Hang, H. N. Hansen, and M. A. Somers, Residual stress in Ni-W electrodeposits, Electrochimica Acta, pp.51-6128, 2006.

N. Eliaz, T. M. Sridhar, and E. Gileadi, Synthesis and characterization of nickel tungsten alloys by electrodeposition, Electrochimica Acta, vol.50, issue.14, pp.2893-2904, 2005.
DOI : 10.1016/j.electacta.2004.11.038

T. Yamasaki, P. Schlossmacher, K. Ehrlich, and Y. Ogino, Formation of amorphous electrodeposited Ni-W alloys and their nanocrystallization, Nanostructured Materials, vol.10, issue.3, pp.375-388, 1998.
DOI : 10.1016/S0965-9773(98)00078-6

M. Ma, V. S. Donepudi, G. Sandi, Y. K. Sun, and J. Prakash, Electrodeposition of nanostructured nickel-21% tungsten alloy and evaluation of oxygen reduction reaction in a 1% sodium hydroxyde solution, Electrochimica Acta, pp.49-4411, 2004.