T. Adachi, Y. Tomita, and M. Tanaka, Computational simulation of deformation behavior of 2D-lattice continuum, International Journal of Mechanical Sciences, vol.40, issue.9, pp.857-866, 1998.
DOI : 10.1016/S0020-7403(97)00127-6

D. Ambrosi and F. Guana, Stress-Modulated Growth, Mathematics and Mechanics of Solids, vol.193, issue.3, pp.319-342, 2007.
DOI : 10.1177/108128650100600601

R. B. Ashman, J. Y. Rho, and C. H. Turner, Anatomical variation of orthotropic elastic moduli of the proximal human tibia, Journal of Biomechanics, vol.22, issue.8-9, pp.895-900, 1989.
DOI : 10.1016/0021-9290(89)90073-0

R. B. Ashman, C. H. Turner, and S. C. Cowin, Ultrasonic technique for the measurement of the structural elastic modulus of cancellous bone, Transactions of the Orthopedic Research Society, vol.43, 1986.

M. Assidi, B. Boubaker, B. Ganghoffer, and J. F. , Equivalent properties of monolayer fabric from mesoscopic modelling strategies, International Journal of Solids and Structures, vol.48, issue.20, pp.2920-2930, 2011.
DOI : 10.1016/j.ijsolstr.2011.06.010

M. Assidi, D. Reis, F. Ganghoffer, and J. F. , Equivalent mechanical properties of biological membranes from lattice homogenization, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.8, pp.1833-1845, 2011.
DOI : 10.1016/j.jmbbm.2011.05.040

X. Badiche, S. Forest, T. Guibert, Y. Bienvenu, J. Bartout et al., Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials, Materials Science and Engineering: A, vol.289, issue.1-2, pp.276-288, 2000.
DOI : 10.1016/S0921-5093(00)00898-4

W. E. Baker, T. C. Togami, and J. C. Weydert, Static and dynamic properties of high-density metal honeycombs, International Journal of Impact Engineering, vol.21, issue.3, pp.149-163, 1998.
DOI : 10.1016/S0734-743X(97)00040-7

N. S. Bakhvalov and G. P. Panasenko, Homogenization Averaging Processes in Periodic Media, 1989.

S. Banerjee and A. Bhaskar, Free vibration of cellular structures using continuum modes, Journal of Sound and Vibration, vol.287, issue.1-2, pp.77-100, 2005.
DOI : 10.1016/j.jsv.2004.10.051

S. Banerjee and A. Bhaskar, The applicability of the effective medium theory to the dynamics of cellular beams, International Journal of Mechanical Sciences, vol.51, issue.8, pp.598-608, 2009.
DOI : 10.1016/j.ijmecsci.2009.06.001

X. Banse, T. J. Sims, and A. J. Bailey, Mechanical Properties of Adult Vertebral Cancellous Bone: Correlation With Collagen Intermolecular Cross-Links, Journal of Bone and Mineral Research, vol.15, issue.Suppl 39, pp.1621-1628, 2002.
DOI : 10.1042/bj3220535

E. Baseau, Finite deformations of elastic???plastic filamentary networks, International Journal of Non-Linear Mechanics, vol.38, issue.10, pp.1473-1479, 2003.
DOI : 10.1016/S0020-7462(02)00083-5

H. H. Bayraktar, A. Gupta, R. Y. Kwon, P. Papadopoulos, and T. M. Keaveny, The Modified Super-Ellipsoid Yield Criterion for Human Trabecular Bone, Journal of Biomechanical Engineering, vol.55, issue.6, pp.677-684, 2004.
DOI : 10.1115/1.1763177

H. H. Bayraktar and T. M. Keaveny, A computational investigation of the nonlinear behavior of human trabecular bone, Transactions of the 12th annual Pre-ORS Symposium on Computational Methods in Orthopaedic Biomechanics, p.2, 2004.

G. S. Beaupré, T. E. Orr, and D. R. Carter, An approach for time-dependent bone modeling and remodeling-application: A preliminary remodeling simulation, Journal of Orthopaedic Research, vol.14, issue.suppl 1, pp.662-670, 1990.
DOI : 10.1016/0021-9290(88)90015-2

B. Boubaker, B. Haussy, B. Ganghoffer, and J. F. , Consideration of the yarn???yarn interactions in meso/macro discrete model of fabric. Part I: Single yarn behaviour, Mechanics Research Communications, vol.34, issue.4, pp.359-370, 2007.
DOI : 10.1016/j.mechrescom.2007.02.003

B. Boubaker, B. Haussy, B. Ganghoffer, and J. F. , Consideration of the yarn???yarn interactions in meso/macro discrete model of fabric, Mechanics Research Communications, vol.34, issue.4, pp.371-378, 2007.
DOI : 10.1016/j.mechrescom.2007.02.002

B. Boubaker, B. Haussy, B. Ganghoffer, and J. F. , Discrete woven structure model: yarn-on-yarn friction, Comptes Rendus M??canique, vol.335, issue.3, pp.150-158, 2007.
DOI : 10.1016/j.crme.2007.02.006

B. Boubaker, B. Haussy, B. Ganghoffer, and J. F. , Discrete models of woven structures. Macroscopic approach, Composites Part B: Engineering, vol.38, issue.4, pp.498-505, 2007.
DOI : 10.1016/j.compositesb.2006.01.007

URL : https://hal.archives-ouvertes.fr/tel-01750013

A. Bensoussan, J. L. Lions, and G. Papanicolaou, Asymptotic Analysis for Periodic Structures, 1978.

E. Birmingham, J. A. Grogan, G. L. Niebur, L. M. Mcnamara, and P. E. Mchugh, Computational Modelling of the Mechanics of Trabecular Bone and Marrow Using Fluid Structure Interaction Techniques, Annals of Biomedical Engineering, vol.48, issue.4, pp.814-826, 2013.
DOI : 10.1016/j.jbiomech.2005.07.006

P. Boisse, M. Borr, K. Buet, and A. Cherouat, Finite element simulations of textile composite forming including the biaxial fabric behaviour, Composites Part B: Engineering, vol.28, issue.4, pp.453-464, 1997.
DOI : 10.1016/S1359-8368(96)00067-4

P. Boisse, A. Gasser, and G. Hivet, Analyses of fabric tensile behaviour: determination of the biaxial tension???strain surfaces and their use in forming simulations, Composites Part A: Applied Science and Manufacturing, vol.32, issue.10, pp.1395-1414, 2001.
DOI : 10.1016/S1359-835X(01)00039-2

P. Boisse, B. Zouari, and J. Daniel, Importance of in-plane shear rigidity in finite element analyses of woven fabric composite preforming, Composites Part A: Applied Science and Manufacturing, vol.37, issue.12, pp.2201-2212, 2006.
DOI : 10.1016/j.compositesa.2005.09.018

URL : https://hal.archives-ouvertes.fr/hal-00378101

P. Boisse, B. Zouari, and A. Gasser, A mesoscopic approach for the simulation of woven fibre composite forming, Composites Science and Technology, vol.65, issue.3-4, pp.3-4, 2005.
DOI : 10.1016/j.compscitech.2004.09.024

URL : https://hal.archives-ouvertes.fr/hal-00020532

F. Bouyge, A multiscale model of cancellous bone, 2000.

F. Bouyge, I. Jasiuk, S. Boccara, and M. Ostoja-starzewski, A micromechanically based couple-stress model of an elastic orthotropic two-phase composite, European Journal of Mechanics - A/Solids, vol.21, issue.3, pp.465-481, 2002.
DOI : 10.1016/S0997-7538(01)01192-5

F. Bouyge, I. Jasiuk, and M. Ostoja-starzewski, A micromechanically based couple-stress model of an elastic two-phase composite, International Journal of Solids Structures, vol.38, 2001.

S. M. Bowman, Creep Contributes to the Fatigue Behavior of Bovine Trabecular Bone, Journal of Biomechanical Engineering, vol.97, issue.5, pp.647-654, 1998.
DOI : 10.1115/1.2834757

A. Boyde, J. C. Elliot, and S. J. Jones, Stereology and histogram analysis of backscattered electron images: Age changes in bone, Bone, vol.14, issue.3, pp.205-210, 1993.
DOI : 10.1016/8756-3282(93)90142-W

D. Broek, Elementary fracture mechanics, 1974.

A. H. Burstein, J. M. Zika, K. G. Heiple, and L. Klein, Contribution of collagen and mineral to the elastic-plastic properties of bone, The Journal of Bone & Joint Surgery, vol.57, issue.7, pp.956-961, 1975.
DOI : 10.2106/00004623-197557070-00013

D. Caillerie, A. Mourad, and A. Raoult, Discrete Homogenization in Graphene Sheet Modeling, Journal of Elasticity, vol.333, issue.1, pp.33-68, 2006.
DOI : 10.1016/S0764-4442(97)87908-6

URL : https://hal.archives-ouvertes.fr/hal-00103196

D. R. Carter, D. P. Fyhrie, and R. T. Whalen, Trabecular bone density and loading history: Regulation of connective tissue biology by mechanical energy, Journal of Biomechanics, vol.20, issue.8, pp.785-794, 1987.
DOI : 10.1016/0021-9290(87)90058-3

D. R. Carter and W. C. Hayes, Bone compressive strength: the influence of density and strain rate, Science, vol.194, issue.4270, pp.1174-176, 1976.
DOI : 10.1126/science.996549

D. R. Carter, M. C. Van-der-meulen, and G. S. Beaupré, Mechanical factors in bone growth and development, Bone, vol.18, issue.1, pp.5-10, 1996.
DOI : 10.1016/8756-3282(95)00373-8

E. Cendre, D. Mitton, J. P. Roux, M. E. Arlot, F. Duboeuf et al., High-Resolution Computed Tomography for Architectural Characterization of Human Lumbar Cancellous Bone: Relationships with Histomorphometry and Biomechanics, Osteoporosis International, vol.10, issue.5, pp.353-360, 1999.
DOI : 10.1007/s001980050240

G. Chen, G. Pettet, M. Pearcy, and D. L. Mcelwain, Comparison of two numerical approaches for bone remodelling, Medical Engineering & Physics, vol.29, issue.1, pp.134-139, 2007.
DOI : 10.1016/j.medengphy.2005.12.008

S. C. Cowin, An incorrect inequality in micropolar elasticity theory, Zeitschrift für angewandte Mathematik und Physik ZAMP, pp.494-497, 1970.
DOI : 10.1007/BF01627956

S. C. Cowin and K. Firoozbakhsh, Bone remodeling of diaphysial surfaces under constant load: Theoretical predictions, Journal of Biomechanics, vol.14, issue.7, pp.471-484, 1981.
DOI : 10.1016/0021-9290(81)90097-X

S. C. Cowin and D. H. Hegedus, Bone remodeling I: theory of adaptive elasticity, Journal of Elasticity, vol.44, issue.3, pp.313-325, 1976.
DOI : 10.1007/BF00284326

S. C. Cowin and W. C. Van-buskirk, Surface bone remodeling induced by a medullary pin, Journal of Biomechanics, vol.12, issue.4, pp.269-276, 1979.
DOI : 10.1016/0021-9290(79)90069-1

F. Devries, H. Dumontet, G. Duvaut, and F. Lene, Homogenization and damage for composite structures, International Journal for Numerical Methods in Engineering, vol.11, issue.2, pp.285-298, 1989.
DOI : 10.1002/nme.1620270206

I. Diamant, R. Shahar, Y. Masharawi, and A. Gefen, A method for patient-specific evaluation of vertebral cancellous bone strength: In vitro validation, Clinical Biomechanics, vol.22, issue.3, pp.282-291, 2007.
DOI : 10.1016/j.clinbiomech.2006.10.005

S. Diebels and H. Steeb, Stress and couple stress in foams, Computational Materials Science, vol.28, issue.3-4, pp.3-4, 2003.
DOI : 10.1016/j.commatsci.2003.08.025

M. Doblaré and J. M. Garcia, Anisotropic bone remodelling model based on a continuum damage-repair theory, Journal of Biomechanics, vol.35, issue.1, pp.1-17, 2002.
DOI : 10.1016/S0021-9290(01)00178-6

D. Reis and F. , Homogenization automatique de milieux discrets périodiques, Applications aux mousses polymères et aux milieux auxétique, 2010.

D. Reis, F. Ganghoffer, and J. F. , Equivalent mechanical properties of auxetic lattices from discrete homogenization, Computational Materials Science, vol.51, issue.1, pp.314-321, 2012.
DOI : 10.1016/j.commatsci.2011.07.014

Y. Duan, M. Keefe, T. A. Bogetti, and B. Powers, Finite element modeling of transverse impact on a ballistic fabric, International Journal of Mechanical Sciences, vol.48, issue.1, pp.33-43, 2006.
DOI : 10.1016/j.ijmecsci.2005.09.007

D. Durville, Modélisation par éléments finis des propriétés mécaniques de structures textiles: de la fibre au tissu, European Journal of Computational Mechanics, vol.11, pp.463-477, 2002.

A. C. Eringen, Linear theory of micropolar elasticity, Journal of Mathematics and Mechanics, vol.15, pp.909-923, 1966.
DOI : 10.21236/AD0473723

A. C. Eringen, Theory of Micropolar Elasticity, Fracture, pp.621-729, 1968.

A. C. Eringen, Continuum Physics ? Non-local Field Theories, 1976.

A. C. Eringen, Microcontinuum field theories: I foundations and solids, 1999.
DOI : 10.1007/978-1-4612-0555-5

A. C. Eringen, Microcontinuum field theories II, 2001.
DOI : 10.1007/978-1-4612-0555-5

S. K. Eswaran, A. Gupta, M. F. Adams, and T. M. Keaveny, Cortical and Trabecular Load Sharing in the Human Vertebral Body, Journal of Bone and Mineral Research, vol.30, issue.2, pp.307-314, 2006.
DOI : 10.1243/09544110260216577

J. Fatemi, O. P. Poort, G. Van-keulen, and F. , Cosserat moduli of anisotropic cancellous bone: A??micromechanical analysis, Journal de Physique IV (Proceedings), vol.105, pp.273-280, 2003.
DOI : 10.1051/jp4:20030197

J. Fatemi, F. Van-keulen, and P. R. Onck, Generalized Continuum Theories: Application to Stress Analysis in Bone, Meccanica, vol.37, issue.4/5, pp.385-396, 2002.
DOI : 10.1023/A:1020839805384

P. Fernandes, H. Rodrigues, and C. Jacobs, A Model of Bone Adaptation Using a Global Optimisation Criterion Based on the Trajectorial Theory of Wolff, Computer Methods in Biomechanics and Biomedical Engineering, vol.139, issue.2, pp.125-138, 1999.
DOI : 10.1002/jor.1100090619

P. R. Fernandes, J. Folgadoa, C. Jacobsb, and V. Pellegrini, A contact model with ingrowth control for bone remodelling around cementless stems, Journal of Biomechanics, vol.35, issue.2, pp.167-176, 2002.
DOI : 10.1016/S0021-9290(01)00204-4

J. Fernandez, J. Garc?a-aznar, R. Mart?nez, and J. Viano, Numerical analysis of a strainadaptive bone remodelling problem, Computer Methods in Applied Mechanics and Engineering, vol.199, pp.23-24, 2010.

C. Field, Q. Li, W. Li, M. Thompson, and M. Swain, A comparative mechanical and bone remodelling study of all-ceramic posterior inlay and onlay fixed partial dentures, Journal of Dentistry, vol.40, issue.1, pp.48-56, 2012.
DOI : 10.1016/j.jdent.2011.10.003

J. Fish, Q. Yu, and K. Shek, Computational damage mechanics for composite materials based on mathematical homogenization, International Journal for Numerical Methods in Engineering, vol.25, issue.11, pp.1657-1679, 1999.
DOI : 10.1016/0013-7944(86)90035-4

C. M. Ford and L. J. Gibson, Uniaxial strength asymmetry in cellular materials: An analytical model, International Journal of Mechanical Sciences, vol.40, issue.6, pp.521-531, 1998.
DOI : 10.1016/S0020-7403(97)00064-7

C. M. Ford and T. M. Keaveny, The dependence of shear failure properties of trabecular bone on apparent density and trabecular orientation, Journal of Biomechanics, vol.29, issue.10, pp.1309-1317, 1996.
DOI : 10.1016/0021-9290(96)00062-0

C. M. Ford, T. M. Keaveny, and W. C. Hayes, The effect of impact direction on the structural capacity of the proximal femur during falls, Journal of Bone and Mineral Research, vol.52, issue.3, pp.377-383, 1996.
DOI : 10.1007/978-1-4612-3450-0_2

S. Forest, R. Dendievel, and G. R. Canova, Estimating the overall properties of heterogeneous Cosserat materials, Modelling and Simulation in Materials Science and Engineering, vol.7, issue.5, pp.829-840, 1999.
DOI : 10.1088/0965-0393/7/5/314

S. Forest and K. Sab, Cosserat overall modeling of heterogeneous materials, Mechanics Research Communications, vol.25, issue.4, pp.449-454, 1998.
DOI : 10.1016/S0093-6413(98)00059-7

S. Forest and R. Sievert, Nonlinear microstrain theories, International Journal of Solids and Structures, vol.43, issue.24, pp.7224-7245, 2006.
DOI : 10.1016/j.ijsolstr.2006.05.012

URL : https://hal.archives-ouvertes.fr/hal-00136739

P. Fridez, L. Rakotomanana, A. Terrier, and P. F. Leyvraz, Three dimensional model of bone external adaptation, Computer Methods in Biomechanics and Biomedical Engineering, vol.2, pp.189-196, 1998.

S. J. Gadeleta, A. L. Boskey, E. Paschalis, C. Carlson, F. Menschik et al., A physical, chemical, and mechanical study of lumbar vertebrae from normal, ovariectomized, and nandrolone decanoate-treated cynomolgus monkeys (macaca fascicularis), Bone, vol.27, issue.4, pp.541-550, 2000.
DOI : 10.1016/S8756-3282(00)00362-8

J. F. Ganghoffer, Mechanical modeling of growth considering domain variation???Part II: Volumetric and surface growth involving Eshelby tensors, Journal of the Mechanics and Physics of Solids, vol.58, issue.9, pp.1434-1459, 2010.
DOI : 10.1016/j.jmps.2010.05.003

J. F. Ganghoffer, A contribution to the mechanics and thermodynamics of surface growth. Application to bone external remodeling, International Journal of Engineering Science, vol.50, issue.1, pp.166-191, 2012.
DOI : 10.1016/j.ijengsci.2011.08.004

J. F. Ganghoffer, A kinematically and thermodynamically consistent volumetric growth model based on the stress-free configuration, International Journal of Solids and Structures, vol.50, issue.20-21, pp.3446-3459, 2013.
DOI : 10.1016/j.ijsolstr.2013.06.011

URL : https://hal.archives-ouvertes.fr/hal-01426238

J. F. Ganghoffer and B. Haussy, Mechanical modeling of growth considering domain variation. Part I: constitutive framework, International Journal of Solids and Structures, vol.42, issue.15, pp.4311-4337, 2005.
DOI : 10.1016/j.ijsolstr.2005.01.011

J. F. Ganghoffer and J. Sokolowski, A micromechanical approach to volumetric and surface growth in the framework of shape optimization, International Journal of Engineering Science, vol.74, pp.207-226, 2014.
DOI : 10.1016/j.ijengsci.2013.10.001

URL : https://hal.archives-ouvertes.fr/hal-01095471

N. Garijo, J. R. Fernàndez, M. A. Pérez, and J. M. García-aznar, Numerical stability and convergence analysis of bone remodeling model, Computer Methods in Applied Mechanics and Engineering, vol.271, pp.253-268, 2014.
DOI : 10.1016/j.cma.2013.12.014

A. Gefen, S. Portnoy, and S. Diamant, Inhomogeneity of tissue-level strain distributions in individual trabeculae: Mathematical model studies of normal and osteoporosis cases, Medical Engineering & Physics, vol.30, issue.5, pp.624-630, 2008.
DOI : 10.1016/j.medengphy.2007.07.001

L. J. Gibson, The mechanical behaviour of cancellous bone, Journal of Biomechanics, vol.18, issue.5, pp.317-328, 1985.
DOI : 10.1016/0021-9290(85)90287-8

L. J. Gibson, Biomechanics of cellular solids, Journal of Biomechanics, vol.38, issue.3, pp.377-399, 2005.
DOI : 10.1016/j.jbiomech.2004.09.027

L. J. Gibson and M. F. Ashby, Cellular Solids: Structures and Properties, 1997.
DOI : 10.1017/CBO9781139878326

L. J. Gibson, M. F. Ashby, G. S. Schajer, and C. I. Robertson, The Mechanics of Two-Dimensional Cellular Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.382, issue.1782, pp.25-42, 1982.
DOI : 10.1098/rspa.1982.0087

I. M. Gitman, H. Askes, K. Kuhl, and E. C. Aifantis, Stress concentrations in fractured compact bone simulated with a special class of anisotropic gradient elasticity, International Journal of Solids and Structures, vol.47, issue.9, pp.1099-1107, 2010.
DOI : 10.1016/j.ijsolstr.2009.11.020

S. Gonella and M. Ruzzene, Homogenization and equivalent in-plane properties of two-dimensional periodic lattices, International Journal of Solids and Structures, vol.45, issue.10, pp.2897-2915, 2008.
DOI : 10.1016/j.ijsolstr.2008.01.002

J. M. Guedes and N. Kikuchi, Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods, Computer Methods in Applied Mechanics and Engineering, vol.83, issue.2, pp.143-198, 1990.
DOI : 10.1016/0045-7825(90)90148-F

X. E. Guo, T. A. Mcmahon, T. M. Keaveny, W. C. Hayes, and L. J. Gibson, Finite element modeling of damage accumulation in trabecular bone under cyclic loading, Journal of Biomechanics, vol.27, issue.2, pp.145-155, 1994.
DOI : 10.1016/0021-9290(94)90203-8

R. Hambli, Apparent damage accumulation in cancellous bone using neural networks, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.6, pp.868-878, 2011.
DOI : 10.1016/j.jmbbm.2011.03.002

URL : https://hal.archives-ouvertes.fr/hal-00788735

N. Hamila, P. Boisse, F. Sabourin, and M. Brunet, A semi-discrete shell finite element for textile composite reinforcement forming simulation, International Journal for Numerical Methods in Engineering, vol.39, issue.7, pp.1443-1466, 2009.
DOI : 10.1007/s12289-008-0265-z

URL : https://hal.archives-ouvertes.fr/hal-00515898

N. M. Harrison, P. F. Mcdonnell, D. C. O-'mahoney, O. D. Kennedy, F. J. O-'brien et al., Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties, Journal of Biomechanics, vol.41, issue.11, pp.2589-2596, 2008.
DOI : 10.1016/j.jbiomech.2008.05.014

L. M. Havill, M. R. Allen, T. L. Bredbenner, D. B. Burr, D. P. Nicolella et al., Heritability of lumbar trabecular bone mechanical properties in baboons, Bone, vol.46, issue.3, pp.835-840, 2010.
DOI : 10.1016/j.bone.2009.11.002

W. C. Hayes and D. Black, Post-yield energy absorption characteristics of trabecular bone, Biomechanics Symposium, vol.177, 1979.

S. J. Hazelwood, R. B. Martin, M. M. Rashid, and J. J. Rodrigo, A mechanistic model for internal bone remodeling exhibits different dynamic responses in disuse and overload, Journal of Biomechanics, vol.34, issue.3, pp.299-308, 2001.
DOI : 10.1016/S0021-9290(00)00221-9

J. W. Hearle, P. Grosberg, and S. Baker, Structural Mechanics of Fibers, Yarns, & Fabrics, 1969.

J. W. Hearle, P. Potluri, and V. S. Thammandra, Modelling Fabric Mechanics, Journal of the Textile Institute, vol.24, issue.3, pp.53-69, 2001.
DOI : 10.1533/9781845691929.67

F. Hecht, O. Pironneau, L. Hyaric, A. Ohtsuka, K. Hellmich et al., FreeFem++ Manual, downloadable at http://www.freefem Can the diverse elastic properties of trabecular and cortical bone be attributed to only a few tissue-independent phase properties and their interactions? Arguments from a multiscale approach, Biomechanics and Modeling in Mechanobiology, vol.2, pp.219-238, 2004.

C. J. Hernandez, G. S. Beaupre, and D. R. Carter, A model of mechanobiologic and metabolic infuences on bone adaptation, Journal of Rehabilitation Research and Development, vol.37, issue.2, pp.235-244, 2000.

S. J. Hollister and N. Kikuchi, A comparison of homogenization and standard mechanics analyses for periodic porous composites, Computational Mechanics, vol.34, issue.2, pp.73-95, 1992.
DOI : 10.1007/3-540-17616-0

J. H. Hu, M. Ding, K. Søballe, J. E. Bechtold, C. C. Danielsen et al., Effects of short-term alendronate treatment on the three-dimensional microstructural, physical, and mechanical properties of dog trabecular bone, Bone, vol.31, issue.5, pp.591-597, 2002.
DOI : 10.1016/S8756-3282(02)00870-0

R. Huiskes, R. Ruimerman, G. H. Van-lenthe, and J. D. Janssen, Effects of mechanical forces on maintenance and adaptation of form in trabecular bone, Nature, vol.279, issue.6787, pp.704-706, 2000.
DOI : 10.1126/science.279.5353.992

I. Ivanov and A. Tabiei, Loosely woven fabric model with viscoelastic crimped fibres for ballistic impact simulations, International Journal for Numerical Methods in Engineering, vol.24, issue.10, pp.1565-1583, 2004.
DOI : 10.1177/004051759206200902

J. Jeong, H. Abid-ramezani, and M. Al-mukhtar, Numerical simulation of elastic linear micropolar media based on the pore space length scale assumption. Strength of materials 40, pp.425-438, 2008.

C. S. Jorgensen and T. Kundu, Measurement of material elastic constants of trabecular bone: a micromechanical analytic study using a 1 GHz acoustic microscope, Journal of Orthopaedic Research, vol.32, issue.1, pp.151-158, 2002.
DOI : 10.1016/S0021-9290(99)00111-6

J. Ju, Damage mechanics of composite materials: constitutive modeling and computational algorithms, 1991.

L. Kaczmarczyk and C. J. Pearce, Efficient numerical analysis of bone remodelling, Journal of the Mechanical Behavior of Biomedical Materials, vol.4, issue.6, pp.858-867, 2011.
DOI : 10.1016/j.jmbbm.2011.03.006

P. Kanouté, D. Boso, J. Chaboche, and B. Schrefler, Multiscale Methods for Composites: A Review, Archives of Computational Methods in Engineering, vol.69, issue.1, pp.31-75, 2009.
DOI : 10.1007/978-1-4613-8646-9_12

S. Kaplan, W. Hayes, J. Stone, and G. Beaupre, Tensile strength of bovine trabecular bone, Journal of Biomechanics, vol.18, issue.9, pp.723-727, 1985.
DOI : 10.1016/0021-9290(85)90027-2

K. Karimi and A. R. Khoei, On the analysis of simple shear problem using the micro-polar hypoelasticity Cosserat theory, European Journal of Mechanics - A/Solids, vol.29, issue.4, pp.664-674, 2010.
DOI : 10.1016/j.euromechsol.2009.12.010

M. Kasra and M. D. Grynpas, On shear properties of trabecular bone under torsional loading: Effects of bone marrow and strain rate, Journal of Biomechanics, vol.40, issue.13, pp.2898-2903, 2007.
DOI : 10.1016/j.jbiomech.2007.03.008

S. Kato, T. Yoshiro, and H. Minami, Formulation of constitutive equations for fabric membranes based on the concept of fabric lattice model, Engineering Structures, vol.21, issue.8, pp.691-708, 1999.
DOI : 10.1016/S0141-0296(98)00024-8

S. Kawabata, M. Niwa, and H. Kawai, 3???THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS PART I: THE BIAXIAL-DEFORMATION THEORY, The Journal of The Textile Institute, vol.17, issue.1, pp.21-46, 1973.
DOI : 10.1177/004051756603600109

S. Kawabata, M. Niwa, and H. Kawai, 4???THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS. PART II: THE UNIAXIAL-DEFORMATION THEORY, The Journal of The Textile Institute, vol.20, issue.2, pp.47-61, 1973.
DOI : 10.1080/19447026308659910

S. Kawabata, M. Niwa, and H. Kawai, 5???THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS. PART III: THE SHEAR-DEFORMATION THEORY, The Journal of The Textile Institute, vol.26, issue.2, pp.62-85, 1973.
DOI : 10.2115/fiber.26.461

T. M. Keaveny, E. F. Wachtel, C. M. Ford, and W. C. Hayes, Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus, Journal of Biomechanics, vol.27, issue.9, pp.1137-1146, 1994.
DOI : 10.1016/0021-9290(94)90054-X

T. M. Keaveny, T. P. Pinilla, R. P. Crawford, D. L. Kopperdahl, and A. Lou, Systematic and random errors in compression testing of trabecular bone, Journal of Orthopaedic Research, vol.27, issue.1, pp.101-110, 1997.
DOI : 10.1243/PIME_PROC_1990_204_240_02

H. S. Kim and S. T. Al-hassani, A morphological model of vertebral trabecular bone, Journal of Biomechanics, vol.35, issue.8, pp.1101-1114, 2002.
DOI : 10.1016/S0021-9290(02)00053-2

M. J. King, P. Jearanaisilawong, and S. Socrate, A continuum constitutive model for the mechanical behavior of woven fabrics, International Journal of Solids and Structures, vol.42, issue.13, pp.3867-3896, 2005.
DOI : 10.1016/j.ijsolstr.2004.10.030

W. T. Koiter, Couple stress in the theory of elasticity, Proceeding of the Koninklijke Nederland Akademie van Wettenschappen B-67, pp.17-44, 1964.

D. L. Kopperdahl and T. M. Keaveny, Yield strain behavior of trabecular bone, Journal of Biomechanics, vol.31, issue.7, pp.601-608, 1998.
DOI : 10.1016/S0021-9290(98)00057-8

D. L. Kopperdahl, E. F. Morgan, and T. M. Keaveny, Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone, Journal of Orthopaedic Research, vol.27, issue.4, pp.801-805, 2002.
DOI : 10.1016/0021-9290(94)90032-9

P. Kowalczyk, Simulation of orthotropic microstructure remodelling of cancellous bone, Journal of Biomechanics, vol.43, issue.3, pp.563-569, 2010.
DOI : 10.1016/j.jbiomech.2009.09.045

E. Kuhl, A. Menzel, and P. Steinmann, Computational modeling of growth, Computational Mechanics, vol.32, issue.1-2, pp.71-88, 2003.
DOI : 10.1007/s00466-003-0463-y

D. Lacroix and P. J. Prendergast, A mechano-regulation model for tissue differentiation during fracture healing: analysis of gap size and loading, Journal of Biomechanics, vol.35, issue.9, pp.1163-1171, 2002.
DOI : 10.1016/S0021-9290(02)00086-6

W. M. Lai, D. Rubin, and E. Krempl, Introduction to continuum mechanics, 1993.

R. Lakes, Materials with structural hierarchy, Nature, vol.361, issue.6412, pp.511-515, 1993.
DOI : 10.1038/361511a0

R. S. Lakes, Experimental microelasticity of two porous solids, International Journal of Solids and Structures, vol.22, issue.1, pp.55-63, 1986.
DOI : 10.1016/0020-7683(86)90103-4

R. Lakes, Experimental methods for study of Cosserat elastic solids and other generalized elastic continua, Continuum Models for Materials with Microstructure, pp.1-22, 1995.

R. Lakes, S. Nakamura, J. Behiri, and W. Bonfield, Fracture mechanics of bone with short cracks, Journal of Biomechanics, vol.23, issue.10, pp.967-975, 1990.
DOI : 10.1016/0021-9290(90)90311-P

T. C. Lee, L. Noelke, G. T. Mcmahon, J. P. Mulville, and D. Taylor, Functional Adaptation in Bone, Synthesis in Bio Solid Mechanics, pp.1-10, 1999.
DOI : 10.1007/0-306-46939-1_1

J. Lemaitre, How to use damage mechanics, Nuclear Engineering and Design, vol.80, issue.2, pp.233-245, 1984.
DOI : 10.1016/0029-5493(84)90169-9

J. Lemaitre and J. L. Chaboche, Aspect Phenomenologique de la Rupture par Endommagement, Journal de Mécanique Appliquée, vol.2, pp.317-365, 1978.

M. E. Levenston and D. R. Carter, An energy dissipation-based model for damage stimulated bone adaptation, Journal of Biomechanics, vol.31, issue.7, pp.579-586, 1998.
DOI : 10.1016/S0021-9290(98)00039-6

X. S. Liu, X. H. Zhang, and X. E. Guo, Contributions of trabecular rods of various orientations in determining the elastic properties of human vertebral trabecular bone, Bone, vol.45, issue.2, pp.158-163, 2009.
DOI : 10.1016/j.bone.2009.04.201

S. Lomov, D. Ivanov, I. Verpoest, M. Zako, T. Kurashiki et al., Meso-FE modelling of textile composites: Road map, data flow and algorithms, Composites Science and Technology, vol.67, issue.9, pp.1870-1891, 2007.
DOI : 10.1016/j.compscitech.2006.10.017

S. R. Lorenzetti, New method to determine the Young's modulus of single trabeculae, 2006.

J. C. Lotz, E. J. Cheal, and W. C. Hayes, Fracture Prediction for the Proximal Femur Using Finite Element Models: Part I???Linear Analysis, Journal of Biomechanical Engineering, vol.113, issue.4, pp.353-360, 1991.
DOI : 10.1115/1.2895412

H. M. Ma, X. Gao, and J. N. Reddy, A microstructure-dependent Timoshenko beam model based on a modified couple stress theory, Journal of the Mechanics and Physics of Solids, vol.56, issue.12, pp.3379-3391, 2008.
DOI : 10.1016/j.jmps.2008.09.007

T. Majid and . Manzari, Application of micropolar plasticity to post failure analysis in geomechanics, International Journal for Numerical and Analytical Methods in Geomechanics, vol.28, issue.10, pp.1011-1032, 2004.

R. B. Martin, A theory of fatigue damage accumulation and repair in cortical bone, Journal of Orthopaedic Research, vol.98, issue.6, pp.818-825, 1992.
DOI : 10.1115/1.3443383

R. B. Martin, Mathematical model for repair of fatigue damage and stress fracture in osteonal bone, Journal of Orthopaedic Research, vol.199, issue.3, pp.309-325, 1995.
DOI : 10.1002/jor.1100130303

I. G. Masters and K. E. Evans, Models for the elastic deformation of honeycombs, Composite Structures, vol.35, issue.4, pp.403-422, 1996.
DOI : 10.1016/S0263-8223(96)00054-2

K. Mcdonald, J. Little, M. Pearcy, and C. Adam, Development of a multi-scale finite element model of the osteoporotic lumbar vertebral body for the investigation of apparent level vertebra mechanics and micro-level trabecular mechanics, Medical Engineering & Physics, vol.32, issue.6, pp.653-661, 2010.
DOI : 10.1016/j.medengphy.2010.04.006

B. P. Mcnamara, P. J. Prendergast, and D. Taylor, Prediction of bone adaptation in the ulnar-osteotomized sheep's forelimb using an anatomical finite element model, Journal of Biomedical Engineering, vol.14, issue.3, pp.209-216, 1992.
DOI : 10.1016/0141-5425(92)90054-O

L. M. Mcnamara and P. J. Prendergast, Bone remodelling algorithms incorporating both strain and microdamage stimuli, Journal of Biomechanics, vol.40, issue.6, pp.1381-1391, 2007.
DOI : 10.1016/j.jbiomech.2006.05.007

L. M. Miller, W. Little, A. Schirmer, F. Sheik, B. Busa et al., Accretion of Bone Quantity and Quality in the Developing Mouse Skeleton, Journal of Bone and Mineral Research, vol.53, issue.7, pp.1037-1045, 2007.
DOI : 10.1007/BF00369213

Z. Miller and M. B. Fuchs, Effect of trabecular curvature on the stiffness of trabecular bone, Journal of Biomechanics, vol.38, issue.9, pp.1855-1864, 2005.
DOI : 10.1016/j.jbiomech.2004.08.018

R. D. Mindlin and H. F. Tiersten, Effects of couple-stresses in linear elasticity, Archive for Rational Mechanics and Analysis, vol.190, issue.1, pp.415-448, 1962.
DOI : 10.1007/BF00253946

R. D. Mindlin, Influence of couple-stresses on stress concentrations, Experimental Mechanics, vol.3, issue.1, pp.1-7, 1963.
DOI : 10.1007/BF02327219

R. D. Mindlin, Micro-structure in linear elasticity, Archive for Rational Mechanics and Analysis, vol.16, issue.1, pp.51-78, 1964.
DOI : 10.1007/BF00248490

E. F. Morgan, H. H. Bayraktar, and T. M. Keaveny, Trabecular bone modulus???density relationships depend on anatomic site, Journal of Biomechanics, vol.36, issue.7, pp.897-904, 2003.
DOI : 10.1016/S0021-9290(03)00071-X

E. F. Morgan and T. M. Keaveny, Dependence of yield strain of human trabecular bone on anatomic site, Journal of Biomechanics, vol.34, issue.5, pp.569-577, 2001.
DOI : 10.1016/S0021-9290(01)00011-2

S. Mori and D. B. Burr, Increased intracortical remodeling following fatigue damage, Bone, vol.14, issue.2, pp.103-109, 1993.
DOI : 10.1016/8756-3282(93)90235-3

L. Mosekilde, Age-related changes in vertebral trabecular bone architecture???assessed by a new method, Bone, vol.9, issue.4, pp.247-250, 1988.
DOI : 10.1016/8756-3282(88)90038-5

L. Mosekilde, Sex differences in age-related loss of vertebral trabecular bone mass and structure???biomechanical consequences, Bone, vol.10, issue.6, pp.425-432, 1989.
DOI : 10.1016/8756-3282(89)90074-4

A. Mourad, Description topologique de l'architecture fibreuse et modelisation mecanique du myocarde, 2003.
URL : https://hal.archives-ouvertes.fr/tel-00004003

A. Mourad, D. A. Caillerie, and A. Raoult, A nonlinearly elastic homogenized constitutive law for the myocardium, Computational Fluid and Solid Mechanics, vol.2, pp.1779-1781, 2003.
DOI : 10.1016/B978-008044046-0.50434-6

H. B. Muhlhaus and F. Oka, Dispersion and wave propagation in discrete and continuous models for granular materials, International Journal of Solids and Structures, vol.33, issue.19, pp.2841-2858, 1996.
DOI : 10.1016/0020-7683(95)00178-6

L. Mulder, J. H. Koolstra, J. M. Den-toonder, and T. M. Van-eijden, Relationship between tissue stiffness and degree of mineralization of developing trabecular bone, Journal of Biomedical Materials Research Part A, vol.37, issue.2, pp.508-515, 2008.
DOI : 10.1016/j.jbiomech.2004.02.018

S. Nawathe, F. Juillard, and T. M. Keaveny, Theoretical bounds for the influence of tissue-level ductility on the apparent-level strength of human trabecular bone, Journal of Biomechanics, vol.46, issue.7, pp.1293-1299, 2013.
DOI : 10.1016/j.jbiomech.2013.02.011

C. Negus and T. Impelluso, Continuum remodeling revisited, Biomechanics and Modeling in Mechanobiology, vol.122, issue.3, pp.211-226, 2007.
DOI : 10.1007/978-1-4899-1810-9_66

S. Ng, P. Tse, and K. Lau, Numerical and experimental determination of in-plane elastic properties of 2/2 twill weave fabric composites, Composites Part B: Engineering, vol.29, issue.6, pp.735-744, 1998.
DOI : 10.1016/S1359-8368(98)00025-0

G. L. Niebur, M. J. Feldstein, J. C. Yuen, T. J. Chen, and T. M. Keaveny, High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone, Journal of Biomechanics, vol.33, issue.12, pp.1575-1583, 2000.
DOI : 10.1016/S0021-9290(00)00149-4

G. L. Niebur, J. C. Yuen, A. C. Hsia, and T. M. Keaveny, Convergence Behavior of High-Resolution Finite Element Models of Trabecular Bone, Journal of Biomechanical Engineering, vol.32, issue.6, pp.629-635, 1999.
DOI : 10.1115/1.2800865

J. W. Nunziato and S. C. Cowin, A nonlinear theory of elastic materials with voids, Archive for Rational Mechanics and Analysis, vol.72, issue.2, pp.175-201, 1979.
DOI : 10.1007/BF00249363

J. A. Oliveira, J. Pinho-da-cruz, and F. Teixeira-dia, Asymptotic homogenisation in linear elasticity. Part II: Finite element procedures and multiscale applications, Computational Materials Science, vol.45, issue.4, pp.1081-1096, 2009.
DOI : 10.1016/j.commatsci.2009.01.027

P. R. Onck, E. Andrews, and L. J. Gibson, Size effects in ductile cellular solids. Part I: modeling, International Journal of Mechanical Sciences, vol.43, issue.3, pp.681-699, 2001.
DOI : 10.1016/S0020-7403(00)00042-4

M. Ostoja-starzewski, S. Boccara, and I. Jasiuk, Couple-stress moduli and characteristics length of a two-phase composite, Mechanics Research Communications, vol.26, issue.4, pp.387-397, 1999.
DOI : 10.1016/S0093-6413(99)00039-7

D. W. Overaker, Micromechanical modeling of open cell structures with application in finite element analysis of vertebral body mechanics, 1997.

G. P. Panasenko, Averaging of processes in frame constructions with random properties, USSR Computational Mathematics and Mathematical Physics, vol.23, issue.5, pp.1098-1109, 1983.
DOI : 10.1016/S0041-5553(83)80156-6

H. C. Park and R. S. Lakes, Torsion of a micropolar elastic prism of square cross-section, International Journal of Solids and Structures, vol.23, issue.4, pp.485-503, 1987.
DOI : 10.1016/0020-7683(87)90013-8

E. M. Parsons, T. Weerasooriya, S. Sarva, and S. Socrate, Impact of woven fabric: Experiments and mesostructure-based continuum-level simulations, Journal of the Mechanics and Physics of Solids, vol.58, issue.11, 1995.
DOI : 10.1016/j.jmps.2010.05.006

F. T. Peirce, 5???THE GEOMETRY OF CLOTH STRUCTURE, Journal of the Textile Institute Transactions, vol.28, issue.3, pp.43-77, 1937.
DOI : 10.1080/19447023708658809

X. Peng and J. Cao, A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics, Composites Part A: Applied Science and Manufacturing, vol.36, issue.6, pp.859-874, 2005.
DOI : 10.1016/j.compositesa.2004.08.008

X. Peng and J. Cao, Numerical determination of mechanical elastic constants of textile composites, 15th Annual Technical Conference of the American Society for Composites, pp.677-688, 2000.

X. Peng and J. Cao, A dual homogenization and finite element approach for material characterization of textile composites, Composites Part B: Engineering, vol.33, issue.1, pp.45-56, 2002.
DOI : 10.1016/S1359-8368(01)00052-X

F. Pradel, Homogénéisation des milieux discrets périodiques orientés Une application aux mousses, Ecole Nationale des Ponts et Chaussées, 1998.

F. Pradel and K. Sab, Cosserat modelling of elastic periodic lattice structures. Comptes Rendus de l'Académie des Sciences -Series IIB -Mechanics-Physics-Astronomy 326, pp.699-704, 1998.

J. Prendergast and R. Huiskes, Mathematical modeling of microdamage in bone remodeling and adaptation, Bone Structure and Remodeling, Recent Advances in Human Biology, pp.213-223, 1995.

P. J. Prendergast and D. Taylor, Prediction of bone adaptation using damage accumulation, Journal of Biomechanics, vol.27, issue.8, pp.1067-1076, 1994.
DOI : 10.1016/0021-9290(94)90223-2

Y. X. Qin, C. T. Rubin, and K. J. Mcleod, Nonlinear dependence of loading intensity and cycle number in the maintenance of bone mass and morphology, Journal of Orthopaedic Research, vol.21, issue.4, pp.482-489, 1998.
DOI : 10.1017/CBO9780511600357.005

S. Ramtani and M. Zidi, Damaged-bone remodeling theory: Thermodynamical approach, Mechanics Research Communications, vol.26, issue.6, pp.701-708, 1999.
DOI : 10.1016/S0093-6413(99)00081-6

S. Ramtani and M. Zidi, A theoretical model of the effect of continuum damage on a bone adaptation model, Journal of Biomechanics, vol.34, issue.4, pp.471-479, 2001.
DOI : 10.1016/S0021-9290(00)00215-3

S. Ramtani and M. Zidi, Damaged-Bone Adaptation Under Steady Homogeneous Stress, Journal of Biomechanical Engineering, vol.106, issue.3, pp.322-329, 2002.
DOI : 10.1115/1.3138503

S. S. Rao, Vibration of continuous systems, 2007.
DOI : 10.1002/9780470117866

A. Raoult, D. Caillerie, and A. Mourad, Elastic lattices: equilibrium, invariant laws and homogenization, ANNALI DELL'UNIVERSITA' DI FERRARA, vol.29, issue.2, pp.297-318, 2008.
DOI : 10.1007/s11565-008-0054-0

URL : https://hal.archives-ouvertes.fr/hal-00188121

H. Rattensperger, J. Eberhardsteiner, and H. A. Mang, Numerical Investigation of High-Pressure Hydraulic Hoses with Steel Wire Braid, Proceedings of the IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, pp.407-416, 2003.
DOI : 10.1007/978-94-017-0297-3_37

M. L. Realff, Mechanical properties of fabrics woven from yarns produced by different spinning technologies, 1992.

M. L. Realff, M. C. Boyce, and S. Backer, A Micromechanical Model of the Tensile Behavior of Woven Fabric, Textile Research Journal, vol.59, issue.6, pp.445-459, 1997.
DOI : 10.1080/19447025908662490

J. Y. Rho, M. C. Hobatho, and R. B. Ashman, Relations of mechanical properties to density and CT numbers in human bone, Medical Engineering & Physics, vol.17, issue.5, pp.347-355, 1995.
DOI : 10.1016/1350-4533(95)97314-F

R. O. Ritchie, M. J. Buehler, and P. Hansma, Plasticity and toughness in bone, Physics Today, vol.62, issue.6, pp.41-47, 2009.
DOI : 10.1016/j.jbiomech.2004.07.010

E. K. Rodriguez, A. Hoger, and A. D. Mccullogh, Stress-dependent finite growth in soft elastic tissues, Journal of Biomechanics, vol.27, issue.4, pp.455-467, 1994.
DOI : 10.1016/0021-9290(94)90021-3

P. Roschger, P. Fratzl, K. Klaushofer, and G. Rodan, Mineralization of cancellous bone after alendronate and sodium fluoride treatment: A quantitative backscattered electron imaging study on minipig ribs, Bone, vol.20, issue.5, pp.393-397, 1997.
DOI : 10.1016/S8756-3282(97)00018-5

M. Rovati and D. Veber, Optimal topologies for micropolar solids. Structural and Multidisciplinary Optimization 33, pp.47-59, 2007.

K. Sab, Déformations microscopiques et macroscopiques dans un assemblage dense de particules rigides, C. R. Acad. Sci. Paris, Ser. IIb, vol.322, pp.715-721, 1996.

K. Sab and F. Pradel, Homogenisation of periodic Cosserat media, International Journal of Computer Applications in Technology, vol.34, issue.1, pp.60-71, 2009.
DOI : 10.1504/IJCAT.2009.022703

URL : https://hal.archives-ouvertes.fr/hal-00517850

T. V. Sagar, P. Potluri, and J. W. Hearle, Mesoscale modelling of interlaced fibre assemblies using energy method, Computational Materials Science, vol.28, issue.1, pp.49-62, 2003.
DOI : 10.1016/S0927-0256(03)00056-9

E. Sanchez-palencia, . Berlin, J. Sanz-herrera, J. Garcia-aznar, and M. Doblaré, Non-homogeneous media and vibration theory On scaffold designing for bone regeneration: a computational multiscale approach, Acta Biomaterialia, vol.5, issue.1, pp.219-229, 1980.

A. Shahkarami and R. Vaziri, A continuum shell finite element model for impact simulation of woven fabrics, International Journal of Impact Engineering, vol.34, issue.1, pp.104-119, 2007.
DOI : 10.1016/j.ijimpeng.2006.06.010

X. Shi, X. S. Liu, X. Wang, X. E. Guo, and G. L. Niebura, Type and orientation of yielded trabeculae during overloading of trabecular bone along orthogonal directions, Journal of Biomechanics, vol.43, issue.13, pp.2460-2466, 2011.
DOI : 10.1016/j.jbiomech.2010.05.032

E. Shmoylova, S. Potapenko, and L. Rothenburg, Stress Distribution Around a Crack in Plane Micropolar Elasticity, Journal of Elasticity, vol.57, issue.3, pp.19-39, 2007.
DOI : 10.1007/978-3-662-09922-3

D. A. Shockey, D. C. Elrich, and J. W. Simons, Improved Barriers to Turbine Engine Fragments: Interim Report I. DOT/FAA AR-99, 1999.

M. J. Silva and L. J. Gibson, Modeling the mechanical behavior of vertebral trabecular bone: Effects of age-related changes in microstructure, Bone, vol.21, issue.2, pp.191-199, 1997.
DOI : 10.1016/S8756-3282(97)00100-2

M. J. Silva, W. C. Hayes, and L. J. Gibson, The effects of non-periodic microstructure on the elastic properties of two-dimensional cellular solids, International Journal of Mechanical Sciences, vol.37, issue.11, pp.1161-1177, 1995.
DOI : 10.1016/0020-7403(94)00018-F

I. Stefanou and J. Sulem, Continuum modeling of discontinuous rock structures. Homogenization of discrete particle assemblies, European Journal of Environmental and Civil engineering, vol.14, issue.8-9, pp.1199-1217, 2010.
DOI : 10.3166/ejece.14.1199-1217

URL : https://hal.archives-ouvertes.fr/hal-00540600

W. J. Stronge and T. X. Yu, Dynamic models for structural plasticity, 1993.
DOI : 10.1007/978-1-4471-0397-4

A. S. Suiker, R. De-borst, and C. S. Chang, Micro-mechanical modelling of granular material. Part 1: Derivation of a second-gradient micro-polar constitutive theory, Acta Mechanica, vol.42, issue.1-4, pp.161-180, 2001.
DOI : 10.1007/978-3-642-57018-6_11

A. Tabiei and W. Yi, Comparative study of predictive methods for woven fabric composite elastic properties, Composite Structures, vol.58, issue.1, pp.149-164, 2002.
DOI : 10.1016/S0263-8223(02)00028-4

H. Talebi, S. V. Wong, and A. M. Hamouda, Finite element evaluation of projectile nose angle effects in ballistic perforation of high strength fabric, Composite Structures, vol.87, issue.4, pp.314-320, 2009.
DOI : 10.1016/j.compstruct.2008.02.009

M. Tanaka and T. Adachi, Lattice continuum model for bone remodeling considering microstructural optimality of trabecular architecture The Netherlands, IUTAM Symposium on Synthesis in Bio Solid Mechanics, pp.43-54, 1999.

R. R. Tanov and M. Brueggert, Finite element modeling of non-orthogonal loosely woven fabrics in advanced occupant restraint systems, Finite Elements in Analysis and Design, vol.39, issue.5-6, pp.357-367, 2003.
DOI : 10.1016/S0168-874X(02)00078-1

D. Taylor, J. G. Hazenberg, and T. C. Lee, Living with cracks: Damage and repair in human bone, Nature Materials, vol.42, issue.4, pp.263-268, 2007.
DOI : 10.1152/ajpcell.00234.2002

M. Taylor, . Cotton, and P. Zioupos, Finite Element Simulation of the Fatigue Behaviour of Cancellous Bone, Meccanica, vol.37, issue.4/5, pp.419-429, 2002.
DOI : 10.1023/A:1020848007201

C. Tekoglu and P. R. Onck, Size effects in two-dimensional Voronoi foams: A comparison between generalized continua and discrete models, Journal of the Mechanics and Physics of Solids, vol.56, issue.12, pp.3541-3564, 2008.
DOI : 10.1016/j.jmps.2008.06.007

A. Tolenado and H. Murakami, A high-order mixture model for periodic particulate composites, International Journal of Solids and Structures, vol.23, pp.989-1002, 1987.

H. Tollenaere and D. Caillerie, Continuous modeling of lattice structures by homogenization, Advances in Engineering Software, vol.29, issue.7-9, pp.699-705, 1998.
DOI : 10.1016/S0965-9978(98)00034-9

P. R. Townsend, R. M. Rose, and E. L. Radin, Buckling studies of single human trabeculae, Journal of Biomechanics, vol.8, issue.3-4, pp.199-201, 1975.
DOI : 10.1016/0021-9290(75)90025-1

J. C. Van-der-lindena, D. H. Birkenhager-frenkelb, J. A. Verhaara, and H. Weinans, Trabecular bone's mechanical properties are affected by its non-uniform mineral distribution, Journal of Biomechanics, vol.34, issue.12, pp.1573-1580, 2001.
DOI : 10.1016/S0021-9290(01)00146-4

M. C. Van-der-meulen, G. S. Beaupré, and D. R. Carter, Mechanobiologic influences in long bone cross-sectional growth, Bone, vol.14, issue.4, pp.635-642, 1993.
DOI : 10.1016/8756-3282(93)90085-O

T. M. Van-eijden, L. J. Van-ruijven, and E. B. Giesen, Bone Tissue Stiffness in the Mandibular Condyle is Dependent on the Direction and Density of the Cancellous Structure, Calcified Tissue International, vol.19, issue.6, pp.502-508, 2004.
DOI : 10.1007/s00223-004-0295-6

B. Van-rietbergen, H. Weinans, R. Huiskes, and A. Odgaard, A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models, Journal of Biomechanics, vol.28, issue.1, pp.69-81, 1995.
DOI : 10.1016/0021-9290(95)80008-5

D. W. Wagner, D. P. Lindsey, and G. S. Beaupre, Deriving tissue density and elastic modulus from microCT bone scans, Bone, vol.49, issue.5, pp.931-938, 2011.
DOI : 10.1016/j.bone.2011.07.021

X. Wang, J. Guyette, X. Liu, R. K. Roeder, and G. L. Niebur, Axial-shear interaction effects on microdamage in bovine tibial trabecular bone, European Journal of Morphology, vol.42, issue.1-2, pp.61-70, 2005.
DOI : 10.1080/09243860500095570

C. Wang, J. Han, Q. Li, L. Wang, and Y. Fan, Simulation of bone remodelling in orthodontic treatment, Computer Methods in Biomechanics and Biomedical Engineering, vol.136, issue.2, pp.1042-50, 2012.
DOI : 10.2319/071910-418.1

C. Wang, C. Zhang, J. Han, H. Wu, and Y. Fan, Simulated evolution of the vertebral body based on basic multicellular unit activities, Journal of Bone and Mineral Metabolism, vol.4, issue.4, pp.466-76, 2011.
DOI : 10.1007/s10237-005-0067-x

X. L. Wang and W. J. Stronge, Micro-polar theory for a periodic force on the edge of elastic honeycomb, International Journal of Engineering Science, vol.39, issue.7, pp.821-50, 2001.
DOI : 10.1016/S0020-7225(00)00065-3

W. E. Warren and A. M. Kraynik, Foam mechanics: the linear elastic response of two-dimensional spatially periodic cellular materials, Mechanics of Materials, vol.6, issue.1, pp.27-37, 1987.
DOI : 10.1016/0167-6636(87)90020-2

A. Watzky and S. Naili, Orthotropic bone remodeling: case of plane stresses, Mechanics Research Communications, vol.31, issue.5, pp.617-625, 2004.
DOI : 10.1016/j.mechrescom.2004.03.013

H. Weinans, R. Huiskes, and H. J. Grootenboer, The behavior of adaptive bone-remodeling simulation models, Journal of Biomechanics, vol.25, issue.12, pp.1425-1441, 1992.
DOI : 10.1016/0021-9290(92)90056-7

L. Weiss and . Ed, Cell and Tissue Biology. A Textbook of Histology, 1988.

J. Wolff, Das Gesetz der Transformation der Knochen, DMW - Deutsche Medizinische Wochenschrift, vol.19, issue.47, 1892.
DOI : 10.1055/s-0028-1144106

U. Wolframa, H. Wilke, and P. K. Zysset, Valid ?? finite element models of vertebral trabecular bone can be obtained using tissue properties measured with nanoindentation under wet conditions, Journal of Biomechanics, vol.43, issue.9, pp.1731-1737, 2010.
DOI : 10.1016/j.jbiomech.2010.02.026

P. Xue, J. Cao, and J. Chen, Integrated micro/macro-mechanical model of woven fabric composites under large deformation, Composite Structures, vol.70, issue.1, pp.69-80, 2005.
DOI : 10.1016/j.compstruct.2004.08.013

P. Xue, X. Peng, and J. Cao, A non-orthogonal constitutive model for characterizing woven composites, Composites Part A: Applied Science and Manufacturing, vol.34, issue.2, pp.183-193, 2003.
DOI : 10.1016/S1359-835X(02)00052-0

F. Yang, A. C. Chong, D. C. Lam, and P. Tong, Couple stress based strain gradient theory for elasticity, International Journal of Solids and Structures, vol.39, issue.10, pp.2731-2743, 2002.
DOI : 10.1016/S0020-7683(02)00152-X

J. F. Yang and R. S. Lakes, Transient Study of Couple Stress Effects in Compact Bone: Torsion, Journal of Biomechanical Engineering, vol.103, issue.4, pp.275-279, 1981.
DOI : 10.1115/1.3138292

O. C. Yeh and T. M. Keaveny, Biomechanical effects of intraspecimen variations in trabecular architecture: a three-dimensional finite element study, Bone, vol.25, issue.2, pp.223-228, 1999.
DOI : 10.1016/S8756-3282(99)00092-7

A. Yoo and I. Jasiuk, Couple-stress moduli of a trabecular bone idealized as a 3D periodic cellular network, Journal of Biomechanics, vol.39, issue.12, pp.2241-2252, 2006.
DOI : 10.1016/j.jbiomech.2005.07.006

G. M. Zhang, R. C. Batra, and J. Zheng, Effect of frame size, frame type, and clamping pressure on the ballistic performance of soft body armor, Composites Part B: Engineering, vol.39, issue.3, pp.476-489, 2008.
DOI : 10.1016/j.compositesb.2007.04.002

H. X. Zhu, Size-dependent elastic properties of micro-and nanohoneycombs, Journal of the Mechanics and Physics of Solids, vol.58, pp.679-696, 2010.

H. X. Zhu, J. R. Hobdell, and A. H. Windle, Effects of cell irregularity on the elastic properties of 2D Voronoi honeycombs, Journal of the Mechanics and Physics of Solids, vol.49, issue.4, pp.857-870, 2001.
DOI : 10.1016/S0022-5096(00)00046-6