B. Belleville, T. Stevanovic, A. Cloutier, A. Pizzi, M. Prado et al., Untersuchung von thermochemischen Ver??nderungen in kanadischen Laubholzarten beim Reibschwei??en, European Journal of Wood and Wood Products, vol.86, issue.3, pp.245-257, 2013.
DOI : 10.1016/j.fuel.2006.12.013

O. Bobleter, Hydrothermal degradation of polymers derived from plants, Progress in Polymer Science, vol.19, issue.5, 1994.
DOI : 10.1016/0079-6700(94)90033-7

L. Delmotte, C. Ganne-chédeville, J. Leban, A. Pizzi, and F. Pichelin, CP-MAS 13C NMR and FTIR investigation of the degradation reactions of polymer constituents in wood welding, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01194991

L. Delmotte, H. Mansouri, P. Omrani, and A. Pizzi, Influence of Wood Welding Frequency on Wood Constituents Chemical Modifications, Journal of Adhesion Science and Technology, vol.23, issue.9, pp.1271-1279, 2009.
DOI : 10.1163/156856108X396345

D. Fengel and G. Wegener, Hydrolysis of Polysaccharides with Trifluoroacetic Acid and its Application to Rapid Wood and Pulp Analysis Hydrolysis of Cellulose: Mechanisms of Enzymatic and Acid Catalysis, Advances in Chemistry Series 181, 1979.

C. Ganne-chédeville, M. Properzi, J. Leban, A. Pizzi, and F. Pichelin, Wood Welding: Chemical and Physical Changes According to the Welding Time, J. Adhesion Sci. Technol, vol.22, pp.761-773, 2008.

C. Ganne-chédeville, G. Duchanois, A. Pizzi, J. Leban, and F. Pichelin, Predicting the Thermal Behavior of Wood During Linear Welding Using the Finite Element Method, J, 2008.

C. Ganne-chédeville, Soudage linéaire du bois: étude et compréhension des modifications physico-chimiques et développement d'une technologie d'assemblage innovante. Dissertation, 2008.

G. Garrote, H. Domínguez, and J. Parajó, Hydrothermal processing of lignocellulosic materials, Holz als Roh- und Werkstoff, vol.57, issue.3, pp.191-202, 1999.
DOI : 10.1007/s001070050039

B. Gfeller, M. Zanetti, M. Properzi, A. Pizzi, F. Pichelin et al., Wood bonding by vibrational welding, Journal of Adhesion Science and Technology, vol.56, issue.1, pp.1573-1589, 2003.
DOI : 10.1007/s001070050269

P. Omrani, Amélioration et nouvelle technologie de soudage linéaire et rotative du bois. Dissertation, 2009.

P. Omrani, E. Masson, A. Pizzi, and H. Mansouri, Emission Gases in Linear Vibration Welding of Wood, Journal of Adhesion Science and Technology, vol.93, issue.1, pp.85-94, 2009.
DOI : 10.1163/156856107780437435

A. Pizzi, A. Despres, H. Mansouri, J. Leban, and S. Rigolet, Wood joints by throughdowel rotation welding: microstructure, 13C-NMR and water resistance, J. Adhesion Sci, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00266575

A. Pizzi, H. Mansouri, J. Leban, L. Delmotte, and F. Pichelin, Enhancing the Exterior Performance of Wood Joined by Linear and Rotational Welding, Journal of Adhesion Science and Technology, vol.101, issue.19, pp.2717-2730, 2011.
DOI : 10.1163/156856107780437435

URL : https://hal.archives-ouvertes.fr/hal-00999848

J. Puls, Substrate Analysis of Forest and Agricultural Wastes Biotechnology in agriculture; bioconversion of forest and agricultural plant residues, CAB International, pp.13-32, 1993.

M. Rhême, J. Botsis, J. Cugnoni, and P. Navi, Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture, Holzforschung, vol.67, pp.747-754, 2013.

M. Rhême, J. Botsis, J. Cugnoni, and P. Navi, Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture, Holzforschung, vol.67, issue.7, pp.755-761, 2013.
DOI : 10.1515/hf-2012-0145

M. Rhême, Strength and fracture characterization of welded wood joints: effects of moisture and mixed mode loadings, 2014.

F. Schütt, J. Puls, and B. Saake, Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood, Holzforschung, vol.65, issue.4, pp.453-459, 2011.
DOI : 10.1007/s00253-010-2654-8

M. Sinner, M. Simatupang, and H. Dietrichs, Automated quantitative analysis of wood carbohydrates by borate complex ion exchange chromatography, Wood Science and Technology, vol.2, issue.4, pp.307-322, 1975.
DOI : 10.1007/BF00353480

M. Sinner and J. Puls, Non-Corrosive dye reagent for detection of reducing sugars in borate complex ion-exchange chromatography, Journal of Chromatography A, vol.156, issue.1, pp.197-204, 1978.
DOI : 10.1016/S0021-9673(00)83140-4

H. Sivonen, S. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.545791, issue.6, pp.648-654, 2002.
DOI : 10.1021/ma00173a020

E. Sjöström, Wood Chemistry: Fundamentals and Application Extraction of galactoglucomannan from spruce wood with pressurized hot water, Holzforschung, vol.62, pp.659-666, 1993.

T. Song, A. Pranovich, and B. Holmbom, Effects of pH control with phthalate buffers on hot-water extraction of hemicelluloses from spruce wood, Bioresource Technology, vol.102, issue.22, pp.10518-10523, 2011.
DOI : 10.1016/j.biortech.2011.08.093

B. Stamm, J. Naterrer, and P. Navi, Herstellen von Holzverbindungen mittels Reibschweissen, Holz als Roh- und Werkstoff, vol.292, issue.1, pp.313-320, 2005.
DOI : 10.1007/s00107-005-0007-6

B. Stamm, E. Windeisen, J. Naterrer, and G. Wegener, Thermal behaviour of polysaccharides in wood during friction welding, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.388-389, 2005.
DOI : 10.1021/ba-1979-0181.ch007

B. Stamm, Development of friction welding of wood ? physical, mechanical and chemical studies, 2006.

B. Stamm, E. Windeisen, J. Naterrer, and G. Wegener, Chemical investigations on the thermal behaviour of wood during friction welding, Wood Science and Technology, vol.32, issue.1, pp.615-627, 2006.
DOI : 10.1007/978-3-642-74065-7_23

Y. Sun, M. Royer, P. Diouf, and T. Stevanovic, Chemical Changes Induced by High-Speed Rotation Welding of Wood ??? Application to Two Canadian Hardwood Species, Journal of Adhesion Science and Technology, vol.99, issue.8-10, pp.1383-1400, 2010.
DOI : 10.1016/j.biortech.2007.09.050

B. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1021/ie51398a022

M. Vaziri, O. Lindgren, and A. Pizzi, Influence of Welding Parameters and Wood Properties on the Water Absorption in Scots Pine Joints Induced by Linear Welding, Journal of Adhesion Science and Technology, vol.50, issue.15, 2011.
DOI : 10.1007/BF02615356

R. Wagenführ, Holzatlas, 5. ergänzte und erweiterte Auflage Mit Zahlreichen Abbildungen, 2000.

S. Willför and B. Holmbom, Isolation and characterisation of water soluble polysaccharides from Norway spruce and Scots pine, Wood Science and Technology, vol.38, issue.3, pp.173-179, 2004.
DOI : 10.1007/s00226-003-0200-x

S. Willför, R. Sjöholm, C. Laine, M. Roslund, J. Hemming et al., Characterisation of water-soluble galactoglucomannans from Norway spruce wood and thermomechanical pulp, Carbohydrate Polymers, vol.52, issue.2, pp.175-187, 2003.
DOI : 10.1016/S0144-8617(02)00288-6

E. Windeisen, C. Strobel, and W. Wegener, Chemical changes during the production of thermo-treated beech wood, Wood Science and Technology, vol.32, issue.6, pp.523-536, 2007.
DOI : 10.1007/978-3-642-74065-7_23

E. Windeisen and G. Wegener, Behaviour of lignin during thermal treatments of wood, Industrial Crops and Products, vol.27, issue.2, 2008.
DOI : 10.1016/j.indcrop.2007.07.015

C. Xu, A. Provanovich, J. Hemming, B. Holmbom, S. Albrecht et al., Hydrolytic stability of water-soluble spruce O-acetyl galactoglucomannans, Holzforschung, vol.51, issue.1, pp.61-68, 2009.
DOI : 10.1021/jf703702y

S. Barcikowski, G. Koch, and J. Odermatt, Charakterisierung und Beeinflussung der W??rmeeinflusszone bei der Laserbearbeitung von Holz und Holzwerkstoffen, Holz als Roh- und Werkstoff, vol.26, issue.7, pp.94-103, 2006.
DOI : 10.1007/s00107-005-0028-1

B. Belleville, T. Stevanovic, A. Cloutier, A. Pizzi, M. Prado et al., Untersuchung von thermochemischen Ver??nderungen in kanadischen Laubholzarten beim Reibschwei??en, European Journal of Wood and Wood Products, vol.86, issue.3, pp.245-257, 2013.
DOI : 10.1016/j.fuel.2006.12.013

M. Boonstra, A. Pizzi, C. Ganne-chédeville, M. Properzi, J. M. Leban et al., Vibration welding of heat-treated wood, Journal of Adhesion Science and Technology, vol.18, issue.5, pp.359-369, 2006.
DOI : 10.1163/156856104839310

L. Delmotte, C. Ganne-chédeville, J. M. Leban, A. Pizzi, and F. Pichelin, CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding, Polymer Degradation and Stability, vol.93, issue.2, pp.406-412, 2008.
DOI : 10.1016/j.polymdegradstab.2007.11.020

URL : https://hal.archives-ouvertes.fr/hal-01194991

B. J. Fergus and D. A. Goring, The Location of Guaiacyl and Syringyl Lignins in Birch Xylem Tissue, Holzforschung, vol.38, issue.4, pp.113-117, 1970.
DOI : 10.1021/ac60053a026

B. J. Fergus and D. A. Goring, The Distribution of Lignin in Birch Wood as Determined by Ultraviolet Microscopy, Holzforschung, vol.66, issue.4, pp.118-124, 1970.
DOI : 10.1515/hfsg.1961.15.3.65

C. Ganne-chédeville, Soudage linéaire du bois: étude et compréhension des modifications physico-chimiques et développement d'une technologie d'assemblage innovante, 2008.

C. Ganne-chédeville, M. Properzi, A. Pizzi, J. M. Leban, and F. Pichelin, Parameters of wood welding: A study with infrared thermography, Holzforschung, vol.55, issue.4, pp.434-438, 2006.
DOI : 10.1016/S0924-0136(01)00587-8

A. R. Spurr, A low-viscosity epoxy resin embedding medium for electron microscopy, Journal of Ultrastructure Research, vol.26, issue.1-2, 1969.
DOI : 10.1016/S0022-5320(69)90033-1

K. Takabe, R. Miyauchi, R. Tsunoda, and K. Fukasawa, Distribution of Guaiacyl and Syringyl Lignins in Japanese Beech (Fagus Crenata): Variation Within an Annual Ring, IAWA Journal, vol.13, issue.1, pp.105-112, 1992.
DOI : 10.1163/22941932-90000561

R. Bergander, A. Salmen, and L. , Cell wall properties and their effects on the mechanical properties of fibers, Journal of Materials Science, vol.37, issue.1, pp.151-156, 2002.
DOI : 10.1023/A:1013115925679

R. E. Booker, The reasons for the microfibril orientations in the tracheid cell walls of trees, Recent advances in wood anatomy. Forest Research Institute, pp.273-282, 1996.

I. Burget, N. Gierlinger, and T. Zimmermann, Properties of chemically and mechanically isolated fibres of spruce (Picea abies Part 1: Structural and chemical characterization, Holzforschung, vol.59, pp.240-246, 2005.

I. Burget, K. Frühmann, J. Keckles, P. Fratz, and S. Stanzl-tschegg, Properties of chemically and mechanically isolated fibres of spruce (Picea abies Part 2: Twisting phenomena, Holzforschung, vol.59, pp.247-251, 2005.

A. J. Brunner, T. Tannert, and T. Vallée, Acoustic emission monitoring of tensile tests on welded wood-joints. European working group on acoustic emission, pp.8-10, 2010.

M. Rhême, Strength and fracture characterization of welded wood joints: effects of moisture and mixed mode loadings, 2014.

S. Saka and D. A. Goring, Localization of Lignins in Wood Cell Walls, pp.51-61, 1985.
DOI : 10.1016/B978-0-12-347880-1.50007-6

A. B. Wardrop, Occurrence and formation in plants, Lignins occurrence, formation, structure and reactions, pp.19-41, 1971.

L. Salmen, M. Akerholm, and B. Hinterstoisser, Two-dimensional Fourier transform infrared spectroscopy applied to cellulose and paper, 2005.

. Polysaccharides, Structural diversity and functional versatility, pp.159-187

L. Salmén and I. Burgert, Cell wall features with regard to mechanical performance. A review. COST Action, 2004.

H. Sivonen, S. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.545791, issue.6, pp.648-654, 2002.
DOI : 10.1021/ma00173a020

E. Sjöström, Wood Chemistry: Fundamentals and applications, 1993.

H. Spatz, L. Kohler, and K. J. Niklas, Mechanical behavior of plant tissues: composite materials or structures?, J. Exp. Biol, vol.202, pp.3269-3272, 1999.

B. Stamm, J. Natterer, and P. Navi, Herstellen von Holzverbindungen mittels Reibschweissen, Holz als Roh- und Werkstoff, vol.292, issue.1, pp.313-320, 2005.
DOI : 10.1007/s00107-005-0007-6

B. Stamm, J. Natterer, and P. Navi, Joining of wood layers by friction welding, Journal of Adhesion Science and Technology, vol.19, issue.13-14, 2005.
DOI : 10.1163/156856104839310

B. Stamm, E. Windeisen, J. Natterer, and G. Wegener, Thermal behaviour of polysaccharides in wood during friction welding, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.388-389, 2005.
DOI : 10.1021/ba-1979-0181.ch007

B. Stamm, Development of friction welding of wood ? physical, mechanical and chemical studies, 2006.

B. Stamm, E. Windeisen, J. Naterrer, and G. Wegener, Chemical investigations on the thermal behaviour of wood during friction welding, Wood Science and Technology, vol.32, issue.1, pp.615-627, 2006.
DOI : 10.1007/978-3-642-74065-7_23

Y. Sun, M. Royer, P. N. Diouf, and T. Stevanovic, Chemical changes induced by highspeed rotation welding of wood-application to two canadian hardwood species, J. Adhes. Sci, 2010.

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1021/ie51398a022

M. Vaziri, O. Lindgren, and A. Pizzi, Optimization of tensile-shear strength for linear welded scots pine, J. Adhes. Sci. Technol, vol.26, pp.109-119, 2012.

M. Vaziri, O. Lindgren, and A. Pizzi, Influence of Welding Parameters and Wood Properties on the Water Absorption in Scots Pine Joints Induced by Linear Welding, Journal of Adhesion Science and Technology, vol.50, issue.15, 2011.
DOI : 10.1007/BF02615356

M. Vaziri, O. Lindgren, A. Pizzi, and H. R. Mansouri, Moisture Sensitivity of Scots Pine Joints Produced by Linear Frictional Welding, Journal of Adhesion Science and Technology, vol.59, issue.8-10, pp.1515-1527, 2010.
DOI : 10.1515/HF.2005.029

T. Vallée, T. Tanner, and C. Ganne-chédeville, Capacity prediction of welded timber joints, Wood Science and Technology, vol.65, issue.3???4, pp.1-3333, 2011.
DOI : 10.1016/j.compstruct.2004.01.007

E. Windeisen, H. Bächle, B. Zimmer, and G. Wegener, Relations between chemical changes and mechanical properties of thermally treated wood. 10 th EWLP, Holzforshung, vol.63, pp.779-778, 2008.

M. Boonstra, A. Pizzi, C. Ganne-chédeville, M. Properzi, J. M. Leban et al., Vibration welding of heat-treated wood, Journal of Adhesion Science and Technology, vol.18, issue.5, pp.359-369, 2006.
DOI : 10.1163/156856104839310

A. Frey-wyssling and H. H. Bosshard, Cytology of the Ray Cells in Sapwood and Heartwood, Holzforschung, vol.13, issue.5, pp.129-136, 1959.
DOI : 10.1007/BF00621704

F. Heger, Etude du phénomène de l'élimination de la mémoire de forme du bois densifié par post-traitement thermo-hydro-mécanique, 2004.

C. Ganne-chédeville, J. M. Leban, M. Properzi, F. Pichelin, and A. Pizzi, Temperature and density distribution in mechanical vibration wood welding, Wood Science and Technology, vol.18, issue.6, pp.72-76, 2006.
DOI : 10.1007/s00226-005-0037-6

C. Ganne-chédeville, M. Properzi, J. M. Leban, A. Pizzi, and F. Pichelin, Wood welding: chemical and physical changes according to the welding time, J. Adhes. Sci, 2008.

C. Ganne-chédeville, Soudage linéaire du bois: étude et compréhension des modifications physico-chimiques et développement d'une technologie d'assemblage innovante. Dissertation, 2008.

B. Gfeller, M. Zanetti, M. Properzi, A. Pizzi, F. Pichelin et al., Wood bonding by vibrational welding, Journal of Adhesion Science and Technology, vol.56, issue.1, pp.1573-1589, 2003.
DOI : 10.1007/s001070050269

G. Koch, J. Puls, and J. Bauch, Topochemical Characterisation of Phenolic Extractives in Discoloured Beechwood (Fagus sylvatica L.), Holzforschung, vol.78, issue.1, pp.339-345, 2003.
DOI : 10.1007/BF02615811

F. Kollmann, R. Keylwerth, and H. Kübler, Verf??rbungen des Vollholzes und der Furniere bei der k??nstlichen Holztrocknung, Holz als Roh- und Werkstoff, vol.58, issue.Nr. 5, pp.382-391, 1951.
DOI : 10.1515/hfsg.1949.3.3.76

J. Leban, A. Pizzi, S. Wieland, M. Zanetti, M. Properzi et al., X-ray microdensitometry analysis of vibration-welded wood, Journal of Adhesion Science and Technology, vol.30, issue.6, pp.673-675, 2004.
DOI : 10.1007/BF00224960

I. Mayer, G. Koch, and J. Puls, Topochemical investigations of wood extractives and their influence on colour changes in American black cherry, 2006.

P. Navi and F. Girardet, Effects of Thermo-Hydro-Mechanical Treatment on the Structure and Properties of Wood, Holzforschung, vol.35, issue.3, pp.287-293, 2000.
DOI : 10.1515/hfsg.1998.52.2.217

P. Omrani, H. R. Mansouri, G. Duchanois, and A. Pizzi, Physico-chemical Causes of the Extent of Water Resistance of Linearly Welded Wood Joints, Journal of Adhesion Science and Technology, vol.93, issue.6, pp.827-837, 2009.
DOI : 10.1016/j.polymdegradstab.2007.11.020

URL : https://hal.archives-ouvertes.fr/hal-01194999

A. Pizzi, J. M. Leban, M. Zanetti, F. Pichelin, S. Wieland et al., Oberfl??chenverg??tung mittels mechanisch induzierter Holzoberfl??chenverschmelzung, Holz als Roh-und Werkstoff, pp.251-255, 2005.
DOI : 10.1007/s00107-004-0569-8

P. Peña, M. I. Deutschle, A. L. Sake, B. Pizzi, A. Pichelin et al., Study of the solubility and composition of welded wood material at progressive welding times

J. Puls, Substrate Analysis of Forest and Agricultural Wastes Biotechnology in agriculture; bioconversion of forest and agricultural plant residues, CAB International, pp.13-32, 1993.

L. Rautkari, M. Properzi, F. Pichelin, and M. Hughes, Surface modification of wood using friction, Wood Science and Technology, vol.102, issue.11, pp.291-299, 2009.
DOI : 10.1163/156856103769207419

M. Sinner, M. H. Simatupang, and H. H. Dietrichs, Automated quantitative analysis of wood carbohydrates by borate complex ion exchange chromatography, Wood Science and Technology, vol.2, issue.4, pp.307-322, 1975.
DOI : 10.1007/BF00353480

M. Sinner and J. Puls, Non-Corrosive dye reagent for detection of reducing sugars in borate complex ion-exchange chromatography, Journal of Chromatography A, vol.156, issue.1, pp.197-204, 1978.
DOI : 10.1016/S0021-9673(00)83140-4

T. Song, A. Pranovich, I. Sumerskiy, and B. Holmbom, Extraction of galactoglucomannan from spruce wood with pressurized hot water, Holzforschung, vol.62, pp.659-666, 2008.

T. Song, A. Pranovich, and B. Holmbom, Effects of pH control with phthalate buffers on hot-water extraction of hemicelluloses from spruce wood, Bioresource Technology, vol.102, issue.22, pp.10518-10523, 2011.
DOI : 10.1016/j.biortech.2011.08.093

B. Stamm, Development of friction welding of wood ? physical, mechanical and chemical studies, 2006.

M. Vaziri, O. Lindgren, and A. Pizzi, Optimization of tensile-shear strength for linear welded scots pine, J. Adhes. Sci. Technol, vol.26, pp.109-119, 2012.

S. Willför, R. Sjöholm, C. Laine, M. Roslund, J. Hemming et al., Characterisation of water-soluble galactoglucomannans from Norway spruce wood and thermomechanical pulp, Carbohydrate Polymers, vol.52, issue.2, pp.175-187, 2003.
DOI : 10.1016/S0144-8617(02)00288-6

R. Banoub, J. Delmas, and M. , Structural elucidation of the wheat straw lignin polymer by atmospheric pressure chemical ionization tandem mass spectrometry and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, Journal of Mass Spectrometry, vol.42, issue.8, pp.900-903, 2003.
DOI : 10.1016/S0032-3861(01)00216-6

C. Ganne-chédeville, Soudage linéaire du bois: étude et compréhension des modifications physico-chimiques et développement d'une technologie d'assemblage innovante, 2008.

B. Gfeller, M. Zanetti, M. Properzi, A. Pizzi, F. Pichelin et al., Wood bonding by vibrational welding, Journal of Adhesion Science and Technology, vol.56, issue.1, pp.1573-1589, 2003.
DOI : 10.1007/s001070050269

H. R. Mansouri, P. Omrani, and A. Pizzi, Improving the Water Resistance of Linear Vibration-Welded Wood Joints, Journal of Adhesion Science and Technology, vol.60, issue.1, pp.63-70, 2009.
DOI : 10.1163/156856107780437435

H. R. Mansouri, A. Pizzi, J. M. Leban, L. Delmotte, O. Lindgren et al., Causes for the Improved Water Resistance in Pine Wood Linear Welded Joints, Journal of Adhesion Science and Technology, vol.93, issue.16, pp.1987-1995, 2011.
DOI : 10.1163/156856109X433991

P. Omrani, Amélioration et nouvelle technologie de soudage linéaire et rotative du bois, 2009.

P. Omrani, H. R. Mansouri, G. Duchanois, and A. Pizzi, Fracture Mechanics of Linearly Welded Wood Joints: Effect of Wood Species and Grain Orientation, Journal of Adhesion Science and Technology, vol.30, issue.16, pp.2057-2072, 2009.
DOI : 10.1098/rsta.1921.0006

P. Omrani, E. Masson, A. Pizzi, and H. R. Mansouri, Emission Gases in Linear Vibration Welding of Wood, Journal of Adhesion Science and Technology, vol.93, issue.1, pp.85-94, 2009.
DOI : 10.1163/156856107780437435

A. Pizzi, X. Zhou, P. Navarrete, C. Segovia, H. R. Mansouri et al., Enhancing water resistance of welded dowel wood joints by acetylated lignin, Journal of Adhesion Science and Technology, vol.77, issue.3, pp.252-262, 2012.
DOI : 10.1002/(SICI)1097-4628(20000725)77:4<841::AID-APP18>3.0.CO;2-0

M. Rhême, J. Botsis, J. Cugnoni, and P. Navi, Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture, Holzforschung, vol.67, pp.747-754, 2013.

M. Rhême, J. Botsis, J. Cugnoni, and P. Navi, Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture, Holzforschung, vol.67, issue.7, pp.755-761, 2013.
DOI : 10.1515/hf-2012-0145

H. Sivonen, S. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.545791, issue.6, pp.648-654, 2002.
DOI : 10.1021/ma00173a020

E. Sjöström, Wood Chemistry: Fundamentals and Application, 1993.

T. Song, A. Pranovich, I. Sumerskiy, and B. Holmbom, Extraction of galactoglucomannan from spruce wood with pressurized hot water, Holzforschung, vol.62, pp.659-666, 2008.

T. Song, A. Pranovich, and B. Holmbom, Effects of pH control with phthalate buffers on hot-water extraction of hemicelluloses from spruce wood, Bioresource Technology, vol.102, issue.22, pp.10518-10523, 2011.
DOI : 10.1016/j.biortech.2011.08.093

B. Stamm, J. Natterer, and P. Navi, Herstellen von Holzverbindungen mittels Reibschweissen, Holz als Roh- und Werkstoff, vol.292, issue.1, pp.313-320, 2005.
DOI : 10.1007/s00107-005-0007-6

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1021/ie51398a022

M. Vaziri, O. Lindgren, and A. Pizzi, Influence of Welding Parameters and Wood Properties on the Water Absorption in Scots Pine Joints Induced by Linear Welding, Journal of Adhesion Science and Technology, vol.50, issue.15, pp.1839-1847, 2011.
DOI : 10.1007/BF02615356

S. Willför, R. Sjöholm, C. Laine, M. Roslund, J. Hemming et al., Characterisation of water-soluble galactoglucomannans from Norway spruce wood and thermomechanical pulp, Carbohydrate Polymers, vol.52, issue.2, pp.175-187, 2003.
DOI : 10.1016/S0144-8617(02)00288-6

E. Windeisen, C. Strobel, and W. Wegener, Chemical changes during the production of thermo-treated beech wood, Wood Science and Technology, vol.32, issue.6, pp.523-536, 2007.
DOI : 10.1007/978-3-642-74065-7_23

C. Xu, A. Provanovich, J. Hemming, B. Holmbom, S. Albrecht et al., Hydrolytic stability of water-soluble spruce O-acetyl galactoglucomannans, Holzforschung, vol.51, issue.1, pp.61-68, 2009.
DOI : 10.1021/jf703702y

B. Gfeller, M. Zanetti, M. Properzi, A. Pizzi, F. Pichelin et al., Wood bonding by vibrational welding, Journal of Adhesion Science and Technology, vol.56, issue.1, pp.1573-1590, 2003.
DOI : 10.1007/s001070050269

J. Leban, A. Pizzi, S. Wieland, M. Zanetti, M. Properzi et al., X-ray microdensitometry analysis of vibration-welded wood, Journal of Adhesion Science and Technology, vol.30, issue.6, pp.673-685, 2004.
DOI : 10.1007/BF00224960

C. Ganne-chedeville, G. Duchanois, A. Pizzi, J. M. Leban, and F. Pichelin, Wood Welded Connections: Energy Release Rate Measurement, Journal of Adhesion Science and Technology, vol.30, issue.2, pp.169-179, 2008.
DOI : 10.1098/rsta.1921.0006

A. Pizzi, J. Leban, F. Kanazawa, M. Properzi, and F. Pichelin, Wood dowel bonding by high-speed rotation welding, Journal of Adhesion Science and Technology, vol.1, issue.11, pp.1263-1278, 2004.
DOI : 10.1007/978-3-642-87931-9

F. Kanazawa, A. Pizzi, M. Properzi, L. Delmotte, and F. Pichelin, Parameters influencing wood-dowel welding by high-speed rotation, Journal of Adhesion Science and Technology, vol.22, issue.12, pp.1025-1038, 2005.
DOI : 10.1007/BF01160778

C. Ganne-chedeville, A. Pizzi, A. Thomas, J. Leban, J. Bocquet et al., Parameter interactions in two-block welding and the wood nail concept in wood dowel welding, Journal of Adhesion Science and Technology, vol.22, issue.1, pp.1157-1174, 2005.
DOI : 10.1007/BF01160778

A. Pizzi, A. Despres, H. R. Mansouri, J. Leban, and S. Rigolet, Wood joints by through-dowel rotation welding: microstructure, 13C-NMR and water resistance, Journal of Adhesion Science and Technology, vol.17, issue.5, pp.427-436, 2006.
DOI : 10.1021/ma00138a009

URL : https://hal.archives-ouvertes.fr/hal-00266575

P. Omrani, J. Bocquet, A. Pizzi, J. Leba, and H. R. Mansouri, Zig-zag rotational dowel welding for exterior wood joints, Journal of Adhesion Science and Technology, vol.21, issue.10, pp.923-933, 2007.
DOI : 10.1163/156856107780684585

URL : https://hal.archives-ouvertes.fr/hal-01194966

A. Pizzi, H. R. Mansouri, J. M. Leban, L. Delmotte, P. Omrani et al., Enhancing the Exterior Performance of Wood Joined by Linear and Rotational Welding, Journal of Adhesion Science and Technology, vol.101, issue.19, pp.2717-2730, 2011.
DOI : 10.1163/156856107780437435

URL : https://hal.archives-ouvertes.fr/hal-00999848

N. Mansouri, A. Pizzi, and J. Salvado, Lignin-based polycondensation resins for wood adhesives, Journal of Applied Polymer Science, vol.100, issue.3, pp.1690-1699, 2007.
DOI : 10.1021/bk-1989-0397.ch038

URL : https://hal.archives-ouvertes.fr/hal-01194987

M. C. Boonstra, A. Pizzi, P. Tekely, and J. Pendlebury, C NMR CP-MAS Study of the Reactivity and Reactions of Polymeric Wood Components with Acetic Anhydride, Holzforschung, vol.18, issue.3, pp.215-220, 1996.
DOI : 10.1080/02773818608085236

A. Pizzi and A. Stephanou, Completion of alkaline cure acceleration of phenol???formaldehyde resins: Acceleration by organic anhydrides, Journal of Applied Polymer Science, vol.51, issue.7, pp.1351-1352, 1994.
DOI : 10.1002/app.1994.070510723

H. Lei, A. Pizzi, A. Despres, H. Pasch, and G. Du, Ester acceleration mechanisms in phenol???formaldehyde resin adhesives, Journal of Applied Polymer Science, vol.639, issue.4, pp.3075-3093, 2006.
DOI : 10.1007/978-3-662-10207-7

A. Pizzi, R. Garcia, and S. Wang, On the networking mechanisms of additives-accelerated phenol-formaldehyde polycondensates, Journal of Applied Polymer Science, vol.66, issue.2, pp.255-266, 1997.
DOI : 10.1002/(SICI)1097-4628(19971010)66:2<255::AID-APP6>3.0.CO;2-V

A. Pizzi and A. Stephanou, On the chemistry, behavior, and cure acceleration of phenol???formaldehyde resins under very alkaline conditions, Journal of Applied Polymer Science, vol.49, issue.12, pp.2157-2160, 1993.
DOI : 10.1002/app.1993.070491212

B. Park and B. , 13C-NMR study on cure-accelerated phenol-formaldehyde resins with carbonates, Journal of Applied Polymer Science, vol.38, issue.4, pp.841-849, 2000.
DOI : 10.1007/978-94-011-2150-7_5

B. Belleville, T. Stevanovic, A. Cloutier, A. Pizzi, M. Prado et al., Untersuchung von thermochemischen Ver??nderungen in kanadischen Laubholzarten beim Reibschwei??en, European Journal of Wood and Wood Products, vol.86, issue.3, pp.245-257, 2013.
DOI : 10.1016/j.fuel.2006.12.013

J. H. Bevington, American Patent No. 444, p.721, 1891.

O. Bobleter, Hydrothermal degradation of polymers derived from plants, Progress in Polymer Science, vol.19, issue.5, 1994.
DOI : 10.1016/0079-6700(94)90033-7

A. J. Brunner, T. Tannert, and T. Vallée, Acoustic emission monitoring of tensile tests on welded wood-joints. European working group on acoustic emission, pp.8-10, 2010.

A. J. Brunner, T. Tannert, and T. Vallée, Waveform analysis of acoustic emission monitoring of tensile tests on welded wood-joints, J. Acoustic Emission, vol.28, pp.59-67, 2010.

L. Delmotte, C. Ganne-chédeville, J. M. Leban, A. Pizzi, and F. Pichelin, CP-MAS 13C NMR and FT-IR investigation of the degradation reactions of polymer constituents in wood welding, Polymer Degradation and Stability, vol.93, issue.2, pp.406-412, 2008.
DOI : 10.1016/j.polymdegradstab.2007.11.020

URL : https://hal.archives-ouvertes.fr/hal-01194991

L. Delmotte, Influence of Wood Welding Frequency on Wood Constituents Chemical Modifications, Journal of Adhesion Science and Technology, vol.23, issue.9, pp.1271-1279, 2009.
DOI : 10.1163/156856108X396345

D. Fengel, G. Wegener, R. D. Brown, and L. Jurasek, Hydrolysis of Polysaccharides with Trifluoroacetic Acid and its Application to Rapid Wood and Pulp Analysis, pp.145-158, 1979.
DOI : 10.1021/ba-1979-0181.ch007

C. Ganne-chédeville, G. Duchanois, A. Pizzi, J. M. Leban, and F. Pichelin, Predicting the Thermal Behaviour of Wood During Linear Welding Using the Finite Element Method, Journal of Adhesion Science and Technology, vol.292, issue.12, pp.1209-1221, 2008.
DOI : 10.1016/S0921-5093(00)01036-4

C. Ganne-chédeville, Soudage linéaire du bois: étude et compréhension des modifications physico-chimiques et développement d'une technologie d'assemblage innovante, 2008.

C. Ganne-chédeville, G. Duchanois, A. Pizzi, F. Pichelin, M. Properzi et al., Wood Welded Connections: Energy Release Rate Measurement, Journal of Adhesion Science and Technology, vol.30, issue.2, 2008.
DOI : 10.1098/rsta.1921.0006

G. Garrote, H. Domínguez, and J. C. Parajó, Hydrothermal processing of lignocellulosic materials, Holz als Roh- und Werkstoff, vol.57, issue.3, pp.191-202, 1999.
DOI : 10.1007/s001070050039

B. Gfeller, M. Zanetti, M. Properzi, A. Pizzi, F. Pichelin et al., Wood bonding by vibrational welding, Journal of Adhesion Science and Technology, vol.56, issue.1, pp.1573-1589, 2003.
DOI : 10.1007/s001070050269

B. Gineste, J. Y. Cognard, and A. Pizzi, Analysis of the mechanical behavior of wood and welded wood under tensile-shear loads using a modified Arcan device, J. Adhesion Sci. Technol, vol.26, pp.1717-1731, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00691356

R. Janzon, F. Schütt, S. Oldenburg, E. Fischer, I. Körner et al., Steam pretreatment of spruce forest residues: Optimal conditions for biogas production and enzymatic hydrolysis, Carbohydrate Polymers, vol.100, pp.202-210, 2013.
DOI : 10.1016/j.carbpol.2013.04.093

P. Köll, G. Borchers, and J. O. Metzger, Preparative isolation of oligomers with a terminal anhydrosugar unit by thermal degradation of chitin and cellulose, Journal of Analytical and Applied Pyrolysis, vol.17, issue.4, 1990.
DOI : 10.1016/0165-2370(90)85020-N

J. Li, G. Henriksson, and G. Gellerstedt, Lignin depolymerization/repolymerization and its critical role for delignification of aspen wood by steam explosion, Bioresource Technology, vol.98, issue.16, pp.3061-3068, 2007.
DOI : 10.1016/j.biortech.2006.10.018

V. Mamleev, S. Bourbigot, and J. Yvon, Kinetic analysis of the thermal decomposition of cellulose: The main step of mass loss, Journal of Analytical and Applied Pyrolysis, vol.80, issue.1, pp.151-165, 2007.
DOI : 10.1016/j.jaap.2007.01.013

H. R. Mansouri, P. Omrani, and A. Pizzi, Improving the Water Resistance of Linear Vibration-Welded Wood Joints, Journal of Adhesion Science and Technology, vol.60, issue.1, pp.63-70, 2009.
DOI : 10.1163/156856107780437435

H. R. Mansouri, A. Pizzi, J. M. Leban, L. Delmotte, O. Lindgren et al., Causes for the Improved Water Resistance in Pine Wood Linear Welded Joints, Journal of Adhesion Science and Technology, vol.93, issue.16, 2011.
DOI : 10.1163/156856109X433991

P. Omrani, E. Masson, A. Pizzi, and H. R. Mansouri, Emission of gases and degradation volatiles from polymeric wood constituents in friction welding of wood dowels, Polymer Degradation and Stability, vol.93, issue.4, 2008.
DOI : 10.1016/j.polymdegradstab.2008.01.017

P. Omrani, A. Pizzi, H. R. Mansouri, J. M. Leban, and L. Delmotte, Physicochemical causes of the extent of water resistance of linearly welded wood joints, J, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01194999

P. Omrani, Amélioration et nouvelle technologie de soudage linéaire et rotative du bois, 2009.

P. Omrani, E. Masson, A. Pizzi, and H. R. Mansouri, Emission Gases in Linear Vibration Welding of Wood, Journal of Adhesion Science and Technology, vol.93, issue.1, pp.85-94, 2009.
DOI : 10.1163/156856107780437435

P. Omrani, H. R. Mansouri, A. Pizzi, and E. Masson, Influence of grain direction and pre-heating on linear wood welding, European Journal of Wood and Wood Products, vol.59, issue.6, pp.113-114, 2010.
DOI : 10.1007/s00107-009-0349-6

A. Pizzi, A. Despres, H. R. Mansouri, J. M. Leban, and S. Rigolet, Wood joints by through-dowel rotation welding: microstructure, 13C-NMR and water resistance, Journal of Adhesion Science and Technology, vol.17, issue.5, 2006.
DOI : 10.1021/ma00138a009

URL : https://hal.archives-ouvertes.fr/hal-00266575

A. Pizzi, H. R. Mansouri, J. M. Leban, L. Delmotte, and F. Pichelin, Enhancing the Exterior Performance of Wood Joined by Linear and Rotational Welding, Journal of Adhesion Science and Technology, vol.101, issue.19, 2011.
DOI : 10.1163/156856107780437435

URL : https://hal.archives-ouvertes.fr/hal-00999848

M. Properzi, J. M. Leban, A. Pizzi, S. Wieland, F. Pichelin et al., Influence of grain direction in vibrational wood welding, Holzforschung, vol.11, issue.1, pp.23-27, 2005.
DOI : 10.1163/1568561041588192

J. Puls and J. N. Saddler, Substrate Analysis of Forest and Agricultural Wastes In: Biotechnology in agriculture; bioconversion of forest and agricultural plant residues, pp.13-32, 1993.

P. Raven, P. Evert, and S. Eichhorn, Biology of Plants (6th, 1999.

M. Rhême, J. Botsis, J. Cugnoni, and P. Navi, Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture, Holzforschung, vol.67, pp.747-754, 2013.

M. Rhême, J. Botsis, J. Cugnoni, and P. Navi, Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture, Holzforschung, vol.67, issue.7, pp.755-761, 2013.
DOI : 10.1515/hf-2012-0145

M. Rhême, Strength and fracture characterization of welded wood joints: effects of moisture and mixed mode loadings, 2014.

F. Schütt, J. Puls, and B. Saake, Optimization of steam pretreatment conditions for enzymatic hydrolysis of poplar wood, Holzforschung, vol.65, issue.4, pp.453-459, 2011.
DOI : 10.1007/s00253-010-2654-8

M. Sinner, M. H. Simatupang, and H. H. Dietrichs, Automated quantitative analysis of wood carbohydrates by borate complex ion exchange chromatography, Wood Science and Technology, vol.2, issue.4, 1975.
DOI : 10.1007/BF00353480

M. Sinner and J. Puls, Non-Corrosive dye reagent for detection of reducing sugars in borate complex ion-exchange chromatography, Journal of Chromatography A, vol.156, issue.1, pp.197-204, 1978.
DOI : 10.1016/S0021-9673(00)83140-4

H. Sivonen, S. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.545791, issue.6, pp.648-654, 2002.
DOI : 10.1021/ma00173a020

E. Sjöström, Wood Chemistry: Fundamentals and Application, 1993.

T. Song, A. Pranovich, I. Sumerskiy, and B. Holmbom, Extraction of galactoglucomannan from spruce wood with pressurized hot water, Holzforschung, vol.62, pp.659-666, 2008.

T. Song, A. Pranovich, and B. Holmbom, Effects of pH control with phthalate buffers on hot-water extraction of hemicelluloses from spruce wood, Bioresource Technology, vol.102, issue.22, pp.10518-10523, 2011.
DOI : 10.1016/j.biortech.2011.08.093

B. Stamm, J. Naterrer, and P. Navi, Herstellen von Holzverbindungen mittels Reibschweissen, Holz als Roh- und Werkstoff, vol.292, issue.1, pp.313-320, 2005.
DOI : 10.1007/s00107-005-0007-6

B. Stamm, E. Windeisen, J. Naterrer, and G. Wegener, Thermal behaviour of polysaccharides in wood during friction welding, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.388-389, 2005.
DOI : 10.1021/ba-1979-0181.ch007

B. Stamm, Development of friction welding of wood ? physical, mechanical and chemical studies, 2006.

B. Stamm, E. Windeisen, J. Naterrer, and G. Wegener, Chemical investigations on the thermal behaviour of wood during friction welding, Wood Science and Technology, vol.32, issue.1, pp.615-627, 2006.
DOI : 10.1007/978-3-642-74065-7_23

Y. Sun, M. Royer, P. N. Diouf, and T. Stevanovic, Chemical Changes Induced by High-Speed Rotation Welding of Wood ??? Application to Two Canadian Hardwood Species, Journal of Adhesion Science and Technology, vol.99, issue.8-10, pp.1383-1400, 2010.
DOI : 10.1016/j.biortech.2007.09.050

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1021/ie51398a022

T. Vallée, T. Tanner, and C. Ganne-chédeville, Capacity prediction of welded timber joints, Wood Science and Technology, vol.65, issue.3???4, pp.1-3333, 2011.
DOI : 10.1016/j.compstruct.2004.01.007

M. Vaziri, O. Lindgren, A. Pizzi, and H. R. Mansouri, Moisture sensitivity of scots pine joints produced by linear frictional welding, J. Adhesion Sci. Technol, vol.25, pp.1515-1527, 2010.

M. Vaziri, O. Lindgren, and A. Pizzi, Influence of Welding Parameters and Wood Properties on the Water Absorption in Scots Pine Joints Induced by Linear Welding, Journal of Adhesion Science and Technology, vol.50, issue.15, 2011.
DOI : 10.1007/BF02615356

R. Wagenführ, Holzatlas, 5. ergänzte und erweiterte Auflage Mit Zahlreichen Abbildungen, 2000.

S. Willför and B. Holmbom, Isolation and characterisation of water soluble polysaccharides from Norway spruce and Scots pine, Wood Science and Technology, vol.38, issue.3, pp.173-179, 2004.
DOI : 10.1007/s00226-003-0200-x

S. Willför, R. Sjöholm, C. Laine, M. Roslund, J. Hemming et al., Characterisation of water-soluble galactoglucomannans from Norway spruce wood and thermomechanical pulp, Carbohydrate Polymers, vol.52, issue.2, pp.175-187, 2003.
DOI : 10.1016/S0144-8617(02)00288-6

E. Windeisen, C. Strobel, and W. Wegener, Chemical changes during the production of thermo-treated beech wood, Wood Science and Technology, vol.32, issue.6, pp.523-536, 2007.
DOI : 10.1007/978-3-642-74065-7_23

E. Windeisen and G. Wegener, Behaviour of lignin during thermal treatments of wood, Industrial Crops and Products, vol.27, issue.2, pp.157-162, 2008.
DOI : 10.1016/j.indcrop.2007.07.015

C. Xu, A. Provanovich, J. Hemming, B. Holmbom, S. Albrecht et al., Hydrolytic stability of water-soluble spruce O-acetyl galactoglucomannans, Holzforschung, vol.51, issue.1, pp.61-68, 2009.
DOI : 10.1021/jf703702y