S. J. Abbott and P. H. Gaskell, Mass production of bio-inspired structured surfaces, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.1, issue.10, pp.1181-1191, 2007.
DOI : 10.1007/978-1-4419-9204-8_7

J. W. Judy, Microelectromechanical systems (MEMS): fabrication, design and applications, Smart Materials and Structures, vol.10, issue.6, p.1115, 2001.
DOI : 10.1088/0964-1726/10/6/301

I. Etsion and E. Sher, Improving fuel efficiency with laser surface textured piston rings, Tribology International, vol.42, issue.4, pp.542-547, 2009.
DOI : 10.1016/j.triboint.2008.02.015

R. Labusch and «. A. , A Statistical Theory of Solid Solution Hardening, physica status solidi (b), vol.61, issue.2, pp.659-669, 1970.
DOI : 10.1002/pssb.19700410221

M. K. Lei and X. M. Zhu, Plasma-based low-energy ion implantation of austenitic stainless steel for improvement in wear and corrosion resistance, Surface and Coatings Technology, vol.193, issue.1-3, 2005.
DOI : 10.1016/j.surfcoat.2004.08.139

Y. Li, L. Wang, J. Xu, and E. D. Zhang, Plasma nitriding of AISI 316L austenitic stainless steels at anodic potential, Plasma nitriding of AISI 316L austenitic stainless steels at anodic potential, pp.2430-2437
DOI : 10.1016/j.surfcoat.2011.10.045

J. Buhagiar, A. Spiteri, M. Sacco, E. Sinagra, and E. H. Dong, Augmentation of crevice corrosion resistance of medical grade 316LVM stainless steel by plasma carburising, Corrosion Science, vol.59, issue.0, pp.169-178, 2012.
DOI : 10.1016/j.corsci.2012.02.023

C. Li and T. Bell, Corrosion properties of active screen plasma nitrided 316 austenitic stainless steel, Corrosion Science, vol.46, issue.6, pp.1527-1547, 2004.
DOI : 10.1016/j.corsci.2003.09.015

L. Nosei, S. Farina, M. Ávalos, L. Náchez, B. J. Gómez et al., Corrosion behavior of ion nitrided AISI 316L stainless steel, Corrosion behavior of ion nitrided AISI 316L stainless steel, pp.1044-1050, 2008.
DOI : 10.1016/j.tsf.2007.08.072

J. García-molleja, L. Nosei, J. Ferrón, E. Bemporad, J. Lesage et al., Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization, Characterization of expanded austenite developed on AISI 316L stainless steel by plasma carburization, pp.3750-3759, 2010.
DOI : 10.1016/j.surfcoat.2010.04.036

H. Dong, P. Qi, X. Y. Li, and R. J. Llewellyn, Improving the erosion???corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and C, Materials Science and Engineering: A, vol.431, issue.1-2, pp.137-145, 2006.
DOI : 10.1016/j.msea.2006.05.122

Y. Sun and E. Haruman, Tribocorrosion behaviour of low temperature plasma carburised 316L stainless steel in 0.5M NaCl solution, Corrosion Science, vol.53, issue.12, pp.4131-4140, 2011.
DOI : 10.1016/j.corsci.2011.08.021

H. L. Costa and I. M. Hutchings, Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions, Tribology International, vol.40, issue.8, pp.1227-1238, 2007.
DOI : 10.1016/j.triboint.2007.01.014

E. G. Borghi, « Tribological effects of surface texturing on nitriding steel for highperformance engine applications, pp.1046-1051, 2008.

M. Duarte, A. Lasagni, R. Giovanelli, J. Narciso, E. Louis et al., Increasing Lubricant Film Lifetime by Grooving Periodical Patterns Using Laser Interference Metallurgy, Advanced Engineering Materials, vol.46, issue.6, pp.554-558, 2008.
DOI : 10.1002/adem.200700321

N. Kawasegi, H. Sugimori, H. Morimoto, N. Morita, and E. I. Hori, Development of cutting tools with microscale and nanoscale textures to improve frictional behavior, Precision Engineering, vol.33, issue.3, pp.248-254, 2009.
DOI : 10.1016/j.precisioneng.2008.07.005

U. Pettersson and S. Jacobson, Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors, Tribology International, vol.40, issue.2, pp.355-359, 2007.
DOI : 10.1016/j.triboint.2005.11.024

K. H. Gahr and M. Mathieu, Friction control by surface engineering of ceramic sliding pairs in water, Wear, vol.263, issue.7-12, pp.920-929, 2007.
DOI : 10.1016/j.wear.2006.11.024

X. Wang, K. Adachi, K. Otsuka, and E. K. Kato, Optimization of the surface texture for silicon carbide sliding in water, Applied Surface Science, vol.253, issue.3, pp.1282-1286, 2006.
DOI : 10.1016/j.apsusc.2006.01.076

X. Wang, K. Kato, and K. Adachi, Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water, Tribology International, vol.36, issue.3, pp.189-197, 2003.
DOI : 10.1016/S0301-679X(02)00145-7

N. Ren, T. Nanbu, Y. Yasuda, D. Zhu, E. Q. Wang et al., Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns, Concentrated- Conformal-Contact Lubrication: Effect of Distribution Patterns, pp.275-285, 2007.
DOI : 10.1007/s11249-007-9271-4

K. Gahr, R. Wahl, and E. K. Wauthier, « Experimental study of the effect of microtexturing on oil lubricated ceramic/steel friction pairs, 17th Int. Conf. Wear Mater, pp.1241-1251, 2009.

M. Nakano, A. Korenaga, A. Korenaga, K. Miyake, T. Murakami et al., Applying Micro-Texture to Cast Iron Surfaces to Reduce the Friction Coefficient Under Lubricated Conditions, Tribology Letters, vol.88, issue.2, pp.131-137, 2007.
DOI : 10.1115/1.3645799

E. Gualtieri, A. Borghi, L. Calabri, N. Pugno, and E. S. Valeri, Increasing nanohardness and reducing friction of nitride steel by laser surface texturing, Tribology International, vol.42, issue.5, pp.699-705, 2009.
DOI : 10.1016/j.triboint.2008.09.008

A. Kovalchenko, O. Ajayi, A. Erdemir, and G. Fenske, The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact, Tribology International, vol.38, issue.3, pp.219-225, 2005.
DOI : 10.1016/j.triboint.2004.08.004

M. Nakano, K. Miyake, A. Korenaga, S. Sasaki, and E. Y. Ando, Tribological Properties of Patterned NiFe-Covered Si Surfaces, Tribological Properties of Patterned NiFe-Covered Si Surfaces, pp.133-139, 2009.
DOI : 10.1299/jsmec.41.125

M. Wakuda, Y. Yamauchi, and S. Kanzaki, Yasuda, « Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact, 2003.

X. Wang, W. Liu, and F. Zhou, Preliminary investigation of the effect of dimple size on friction in line contacts, Tribology International, vol.42, issue.7, pp.1118-1123, 2009.
DOI : 10.1016/j.triboint.2009.03.012

X. Wang, K. Kato, and K. Adachi, The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed, Tribology International, vol.34, issue.10, pp.703-711, 2001.
DOI : 10.1016/S0301-679X(01)00063-9

H. Yu, X. Wang, and E. F. Zhou, Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting Surfaces, Tribology Letters, vol.29, issue.2, pp.123-130, 2009.
DOI : 10.1115/1.3645799

S. Yuan, W. Huang, and E. X. Wang, Orientation effects of micro-grooves on sliding surfaces, Tribology International, vol.44, issue.9, pp.1047-1054, 2011.
DOI : 10.1016/j.triboint.2011.04.007

X. Wang and K. Kato, « Improving the Anti-seizure Ability of SiC Seal in Water with RIE Texturing, Tribology Letters, vol.14, issue.4, pp.275-280, 2003.
DOI : 10.1023/A:1022650813314

J. Wang, Z. Han, H. Chen, and E. D. Chen, Drag Reduction by Dimples on Surfaces in Plane???Plane Contact Lubrication, Tribology Letters, vol.42, issue.101, pp.159-166, 2008.
DOI : 10.1115/1.3251446

X. Wang and K. Kato, The Lubrication Effect of Micro-Pits on Parallel Sliding Faces of SiC in Water, Tribology Transactions, vol.44, issue.3, pp.294-301, 2002.
DOI : 10.1023/A:1019174615499

A. A. Bruzzone, H. L. Costa, P. M. Lonardo, D. A. Lucca, and ». , Advances in engineered surfaces for functional performance, Advances in engineered surfaces for functional performance, pp.750-769, 2008.
DOI : 10.1016/j.cirp.2008.09.003

M. Geissler, Y. Xia, and . Patterning, Patterning: Principles and Some New Developments, Advanced Materials, vol.16, issue.15, pp.1249-1269, 2004.
DOI : 10.1002/adma.200400835

A. Kovalchenko, O. Ajayi, and A. Erdemir, Friction and wear behavior of laser textured surface under lubricated initial point contact, Wear, vol.271, issue.9-10, pp.1719-1725, 2011.
DOI : 10.1016/j.wear.2010.12.049

L. Rapoport, A. Moshkovich, V. Perfilyev, I. Lapsker, G. Halperin et al., Itovich, et I. Etsion, « Friction and wear of MoS2 films on laser textured steel surfaces, Surf. Coat. Technol, vol.202, pp.14-3332, 2008.

T. Hu and L. Hu, Ding, « Effective solution for the tribological problems of Ti-6Al-4V: Combination of laser surface texturing and solid lubricant film, Surf. Coat. Technol, vol.206, pp.24-5060, 2012.

Y. Wan and D. Xiong, The effect of laser surface texturing on frictional performance of face seal, Journal of Materials Processing Technology, vol.197, issue.1-3, pp.96-100, 2008.
DOI : 10.1016/j.jmatprotec.2007.06.019

S. P. Mishra and A. A. Polycarpou, Tribological studies of unpolished laser surface textures under starved lubrication conditions for use in air-conditioning and refrigeration compressors, Tribology International, vol.44, issue.12, pp.12-1890
DOI : 10.1016/j.triboint.2011.08.005

H. Yamakiri, S. Sasaki, T. Kurita, and E. N. Kasashima, Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water, Tribology International, vol.44, issue.5, pp.579-584, 2011.
DOI : 10.1016/j.triboint.2010.11.002

L. Mourier, D. Mazuyer, and A. A. Lubrecht, Donnet, « Transient increase of film thickness in micro-textured EHL contacts, Tribol. Int, vol.39, pp.12-1745, 2006.

Y. Qiu and M. M. Khonsari, Experimental investigation of tribological performance of laser textured stainless steel rings, Tribology International, vol.44, issue.5, pp.635-644, 2011.
DOI : 10.1016/j.triboint.2011.01.003

M. Geiger, S. Roth, and E. W. Becker, Influence of laser-produced microstructures on the tribological behaviour of ceramics, Surface and Coatings Technology, vol.100, issue.101, pp.17-22, 1998.
DOI : 10.1016/S0257-8972(97)00581-1

J. Chae, S. S. Park, and T. Freiheit, Investigation of micro-cutting operations, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.313-332, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.015

A. Aramcharoen and P. T. Mativenga, Size effect and tool geometry in micromilling of tool steel, Precision Engineering, vol.33, issue.4, pp.402-407, 2009.
DOI : 10.1016/j.precisioneng.2008.11.002

P. Cardoso and J. P. Davim, « A brief review on micromachining of materials, Rev Adv Mater Sci, vol.30, pp.98-102, 2012.

D. P. Adams, M. J. Vasile, G. Benavides, and A. N. Campbell, Micromilling of metal alloys with focused ion beam???fabricated tools, Precision Engineering, vol.25, issue.2, pp.107-113, 2001.
DOI : 10.1016/S0141-6359(00)00064-7

I. K?upka, M. Vka, and E. M. Haatl, Effect of surface texturing on mixed lubricated non-conformal contacts, Life Proc. 34th Leeds-Lyon Symp, pp.1063-1073, 2008.
DOI : 10.1016/j.triboint.2007.11.016

J. Pelletier, A. Lacoste, Y. Arnal, T. Lagarde, and C. Lincot, New trends in DECR plasma technology: applications to novel duplex treatments and process combinations with extreme plasma specifications, Surface and Coatings Technology, vol.139, issue.2-3, pp.222-232, 2001.
DOI : 10.1016/S0257-8972(01)01020-9

Y. Guo, Etude des iteatios eete l'azote et le aoe los de taiteeets séquencés de nitruration, de carburation et de nitrocarburation à basse température d'aiees iodales austitiues : appliation à la texturation de surface, 2010.

T. Thiriet, Traitement mécaniques et thermochimiques couplés sur acier inoxydable et alliage base nickel austénitiques. Vandoeuvre-les, 2010.

S. Mändl and B. Rauschenbach, Anisotropic strain in nitrided austenitic stainless steel, Anisotropic strain in nitrided austenitic stainless steel, pp.3323-3329, 2000.
DOI : 10.1557/JMR.1993.0438

T. Christiansen and M. A. Somers, Controlled dissolution of colossal quantities of nitrogen in stainless steel, Metallurgical and Materials Transactions A, vol.154, issue.3, pp.675-682, 2006.
DOI : 10.1179/sur.1997.13.6.483

N. Renevier, P. Collignon, H. Michel, and E. T. Czerwiec, Low temperature nitriding of AISI 316L stainless steel and titanium in a low pressure arc discharge, Surface and Coatings Technology, vol.111, issue.2-3, pp.128-133, 1999.
DOI : 10.1016/S0257-8972(98)00722-1

M. Booth, T. Farrell, and R. , The theory and practice of plasma carburising, Materials & Design, vol.5, issue.3, pp.139-148, 1984.
DOI : 10.1016/0261-3069(84)90083-9

J. Stinville, « Evolution des microstructures et textures locales par nitruration plassa de laaiee L. ''peeeussioo su sa duaailit e fatigue, 2010.

A. Maatiaai?ius, G. Aasoois, W. Möllee, C. Teepliee, J. P. Rivière et al., Chumlyakov, « Anisotropic ion-enhanced diffusion during ion nitriding of single crystalline austenitic stainless steel, J. Appl. Phys, vol.105, issue.9, p.93502, 2009.

X. Xu, Z. Yu, L. Wang, J. Qiang, and E. Z. Hei, Phase depth distribution characteristics of the plasma nitrided layer on AISI 304 stainless steel, Phase depth distribution characteristics of the plasma nitrided layer on AISI 304 stainless steel, pp.242-247, 2003.
DOI : 10.1016/S0257-8972(02)00670-9

G. Abrasonis, J. P. Rivière, C. Templier, A. Declemy, and S. Muzard, A comparative study of ion beam nitriding of single-crystalline and polycrystalline 316L austenitic stainless steel, Surface and Coatings Technology, vol.196, issue.1-3, pp.262-266, 2005.
DOI : 10.1016/j.surfcoat.2004.08.099

Y. Sun, Kinetics of low temperature plasma carburizing of austenitic stainless steels, Journal of Materials Processing Technology, vol.168, issue.2, pp.189-194, 2005.
DOI : 10.1016/j.jmatprotec.2004.10.005

E. Menthe and K. T. Rie, Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding, Surface and Coatings Technology, vol.116, issue.119, pp.199-204, 1999.
DOI : 10.1016/S0257-8972(99)00085-7

S. T. Li, Thermal stability of carbon S phase in 316 stainless steel, Thermal stability of carbon S phase in 316 stainless steel, pp.448-451, 2002.
DOI : 10.1016/0025-5416(82)90067-2

T. Marray, Caoituatio asse pessio d'aiees et de pies oteues pa la technologie MIM

M. P. Fewell, J. M. Priest, M. J. Baldwin, G. A. Collins, and K. T. Short, Nitriding at low temperature, Nitriding at low temperature, pp.284-290, 2000.
DOI : 10.1016/S0257-8972(00)00793-3

T. Moskalioviene, A. Galdikas, J. P. Rivière, E. L. Pichon, and . Modeling, Modeling of nitrogen penetration in polycrystalline AISI 316L austenitic stainless steel during plasma nitriding, polycrystalline AISI 316L austenitic stainless steel during plasma nitriding, pp.3301-3306
DOI : 10.1016/j.surfcoat.2010.11.060

S. Adachi and N. Ueda, Formation of S-phase layer on plasma sprayed AISI 316L stainless steel coating by plasma nitriding at low temperature, Thin Solid Films, vol.523, pp.11-14
DOI : 10.1016/j.tsf.2012.05.062

C. Blawert, H. Kalvelage, B. L. Mordike, G. A. Collins, K. T. Short et al., Nitrogen and carbon expanded austenite produced by PI3, Surface and Coatings Technology, vol.136, issue.1-3, pp.181-187, 2001.
DOI : 10.1016/S0257-8972(00)01050-1

R. Wei, J. J. Vajo, J. N. Matossian, P. J. Wilbur, J. A. Davis et al., A comparative study of beam ion implantation, plasma ion implantation and nitriding of AISI 304 stainless steel, Surface and Coatings Technology, vol.83, issue.1-3, pp.235-242, 1996.
DOI : 10.1016/0257-8972(95)02825-0

C. Templier, J. C. Stinville, P. Villechaise, P. O. Renault, G. Abrasonis et al., On lattice plane rotation and crystallographic structure of the expanded austenite in plasma nitrided AISI 316L steel, On lattice plane rotation and crystallographic structure of the expanded austenite in plasma nitrided AISI 316L steel, pp.2551-2558, 2010.
DOI : 10.1016/j.surfcoat.2010.01.041

S. Grigull and S. Parascandola, Ion-nitriding induced plastic deformation in austenitic stainless steel, Journal of Applied Physics, vol.88, issue.11, pp.6925-6927, 2000.
DOI : 10.1016/S0257-8972(99)00084-5

J. Oddershede, T. L. Christiansen, K. Ståhl, and M. A. Somers, Extended X-ray absorption fine structure investigation of nitrogen stabilized expanded austenite, Scripta Materialia, vol.62, issue.5, pp.290-293, 2010.
DOI : 10.1016/j.scriptamat.2009.11.021

J. Crank, The mathematics of diffusion, 1975.

S. Parascandola, W. Möller, and D. L. Williamson, The nitrogen transport in austenitic stainless steel at moderate temperatures, Applied Physics Letters, vol.76, issue.16, pp.2194-2196, 2000.
DOI : 10.1016/S0257-8972(97)00532-X

D. L. Williamson, J. A. Davis, and P. J. Wilbur, Effect of austenitic stainless steel composition on low-energy, high-flux, nitrogen ion beam processing, Surface and Coatings Technology, vol.103, issue.104, pp.178-184, 1998.
DOI : 10.1016/S0257-8972(98)00389-2

D. Stróz and M. Psoda, TEM studies of plasma nitrided austenitic stainless steel, TEM studies of plasma nitrided austenitic stainless steel, pp.227-231, 2010.
DOI : 10.1111/j.1365-2818.2009.03228.x

J. Dulcy and M. Gantois, « Formation et durcissement de la couche de diffusion en nitruration et nitrocarburation, Système fer-chrome-azote et fer-chrome-azotecarbone

J. C. Stinville, C. Tromas, and P. Villechaise, Anisotropy changes in hardness and indentation modulus induced by plasma nitriding of 316L polycrystalline stainless steel, Scripta Materialia, vol.64, issue.1, pp.37-40, 2011.
DOI : 10.1016/j.scriptamat.2010.08.058

F. Ernst, Y. Cao, G. M. Michal, and A. H. Heuer, Carbide precipitation in austenitic stainless steel carburized at low temperature, Carbide precipitation in austenitic stainless steel carburized at low temperature, pp.1895-1906, 2007.
DOI : 10.1016/j.actamat.2006.09.049

F. Borgioli, A. Fossati, E. Galvanetto, and E. T. Bacci, Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment temperature, Surface and Coatings Technology, vol.200, issue.7, pp.2474-2480, 2005.
DOI : 10.1016/j.surfcoat.2004.07.110

S. , C. Gallo, and H. Dong, « EBSD and AFM observations of the microstructural changes induced by low temperature plasma carburising on AISI 316, Appl. Surf. Sci, vol.258, issue.1, pp.608-613, 2011.

J. C. Stinville, C. Templier, P. Villechaise, and E. L. Pichon, Swelling of 316L austenitic stainless steel induced by plasma nitriding, Swelling of 316L austenitic stainless steel induced by plasma nitriding, pp.5503-5511, 2011.
DOI : 10.1002/ppap.200930003

A. Galdikas and T. Moskalioviene, Swelling effect on stress induced and concentration dependent diffusion of nitrogen in plasma nitrided austenitic stainless steel, Computational Materials Science, vol.72, pp.140-145, 2013.
DOI : 10.1016/j.commatsci.2013.02.007

S. Chollet, L. Pichon, J. Cormier, J. B. Dubois, P. Villechaise et al., Plasma assisted nitriding of Ni-based superalloys with various microstructures, Surface and Coatings Technology, vol.235, pp.318-325
DOI : 10.1016/j.surfcoat.2013.07.060

P. Shankar, P. Palanichamy, T. Jayakumar, B. Raj, and S. Ranganathan, Nitrogen redistribution, microstructure, and elastic constant evaluation using ultrasonics in aged 316LN stainless steels, Metallurgical and Materials Transactions A, vol.31, issue.2, pp.12-2959, 2001.
DOI : 10.1007/BF02666679

C. Tromas, J. C. Stinville, and C. Templier, Villechaise, « Hardness and elastic modulus gradients in plasma-nitrided 316L polycrystalline stainless steel investigated by nanoindentation tomography, Acta Mater, vol.60, issue.5, 2012.

G. Marcos, S. Guilet, F. Cleymand, and T. Thiriet, Stainless steel patterning by combination of micro-patterning and driven strain produced by plasma assisted nitriding, Surface and Coatings Technology, vol.205, pp.275-279
DOI : 10.1016/j.surfcoat.2011.01.016

M. Adjemout, A. Andrieux, J. Bouyer, N. Brunetière, and G. Marcos, Czerwiec, « Influence of the real dimple shape on the performance of a surface textured mechanical seal », 13th EDF/Pprime Workshop Proceedings, 2014.

M. Adjemout, N. Brunetiere, and E. J. Bouyer, Optimization of mesh density for numerical simulations of hydrodynamic lubrication considering textured surfaces, Proc. Inst, p.1350650115574535, 2015.
DOI : 10.1115/1.2819284

F. Borgioli, E. Galvanetto, and E. T. Bacci, Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels, Materials Characterization, vol.95, pp.278-284, 2014.
DOI : 10.1016/j.matchar.2014.07.006

M. Gantois and J. Dulcy, « Théorie des traitements thermochimiques, Nitruration, nitrocarburation, Systèmes binaires et ternaires fer-azote et fer-azote-carbone

B. Edenhofer and W. Gräfen, Müller-Ziller, « Plasma-carburising ? a surface heat treatment process for the new century, Proc. 7th Int, pp.225-234, 2001.

K. Rie, Recent advances in plasma diffusion processes, Recent advances in plasma diffusion processes, pp.56-62, 1999.
DOI : 10.1016/S0257-8972(98)00747-6

G. G. Tibbetts and «. 'ole-of-itogee-atos-i-`-`-io?itidiggg, Role of nitrogen atoms in ``ion???nitriding'', Journal of Applied Physics, vol.188, issue.11, pp.5072-5073, 1974.
DOI : 10.1103/PhysRev.135.A1566

Y. Sun and T. Bell, A numerical model of plasma nitriding of low alloy steels, Materials Science and Engineering: A, vol.224, issue.1-2, pp.33-47, 1997.
DOI : 10.1016/S0921-5093(96)10561-X

H. Michel, T. Czerwiec, M. Gantois, D. Ablitzer, and E. A. Ricard, Progress in the analysis of the mechanisms of ion nitriding, Surface and Coatings Technology, vol.72, issue.1-2, pp.103-111, 1995.
DOI : 10.1016/0257-8972(94)02339-5

T. Czerwiec, N. Renevier, and E. H. Michel, Low-temperature plasma-assisted nitriding, Surface and Coatings Technology, vol.131, issue.1-3, pp.267-277, 2000.
DOI : 10.1016/S0257-8972(00)00792-1

H. K. Wu, Orientation dependence of nitrogen supersaturation in austenitic stainless steel during low-temperature gas-phase nitriding, Acta Materialia, vol.79, pp.339-350, 2014.
DOI : 10.1016/j.actamat.2014.07.007

G. M. Michal, F. Ernst, H. Kahn, Y. Cao, F. Oba et al., Carbon supersaturation due to paraequilibrium carburization: Stainless steels with greatly improved mechanical properties, Acta Materialia, vol.54, issue.6, pp.1597-1606, 2006.
DOI : 10.1016/j.actamat.2005.11.029

A. Triwiyanto, P. Hussain, A. Rahman, and M. C. Ismail, The Influence of Nitriding Time of AISI 316L Stainless Steel on Microstructure and Tribological Properties, The Influence of Nitriding Time of AISI 316L Stainless Steel on Microstructure and Tribological Properties, pp.323-330
DOI : 10.3923/ajsr.2013.323.330

J. Philibert, Atom movements -Diffusion and mass transport in solids, EDP Sciences, 2012.

A. Marciniak, Equilibrium and Non-Equilibrium Models of Layer Formation During Plasma and Gas Nitriding, Surface Engineering, vol.26, issue.1, pp.283-288, 1985.
DOI : 10.1007/BF02745421

L. Torchane, P. Bilger, J. Dulcy, and E. M. Gantois, Application of a Mathematical Model of Iron-Nitride Layer Growth during Gas Phase Nitriding, Materials Science Forum, vol.163, issue.165, pp.707-712, 1994.
DOI : 10.4028/www.scientific.net/MSF.163-165.707

M. A. Somers and E. J. Mittemeijer, Layer-growth kinetics on gaseous nitriding of pure iron: Evaluation of diffusion coefficients for nitrogen in iron nitrides, Metallurgical and Materials Transactions A, vol.163, issue.165, pp.57-74, 1995.
DOI : 10.1007/BF02656574

I. Campos, J. Oseguera, U. Figueroa, and E. E. Meléndez, Growth kinetics of nitride layers during postdischarge nitriding, Surface and Coatings Technology, vol.102, issue.1-2, pp.127-131, 1998.
DOI : 10.1016/S0257-8972(97)00692-0

T. Belmonte, M. Gouné, and E. H. Michel, Numerical modeling of interstitial diffusion in binary systems. Application to iron nitriding, Materials Science and Engineering: A, vol.302, issue.2, pp.246-257, 2001.
DOI : 10.1016/S0921-5093(00)01830-X

H. Kuwahara, H. Matsuoka, J. Takada, S. Kikuchi, Y. Tomii et al., Plasma nitriding of Fe-18Cr-9Ni in the range of 723?823 K, Oxidation of Metals, vol.20, issue.1-2, pp.143-156, 1991.
DOI : 10.1007/BF00938459

V. I. Diito, J. Dhae, G. Kkut, C. Quaehaegees, and E. L. , tals, « A method for determination of the effective diffusion coefficient and sputtering rate during plasma diffusion treatment, Surf. Coat. Technol, vol.99, issue.3, pp.234-241, 1998.

T. L. Christiansen and M. A. Somers, Determination of the concentration dependent diffusion coefficient of nitrogen in expanded austenite, International Journal of Materials Research, vol.99, issue.9, pp.999-1005, 2008.
DOI : 10.3139/146.101729

P. Cousinou, « Cootiutio à ltude de la itiue des taiteeets thermocimiques superficiels des métaux en atmospèhre gazeuse réactive, Thèse INPL

C. L. Saker, Properties of sputtered stainless steel-nitrogen coatings and structural analogy with low temperature plasma nitrided layers of austenitic steels, Mater. Sci. Eng. -Struct. Mater. Prop. Microstruct. Process. -MATER SCI ENG -STRUCT MATER, pp.702-708, 1991.
DOI : 10.1016/0921-5093(91)90500-M

J. Slycke and T. Ericsson, A study of reactions occurring during the carbonitriding process, Journal of Heat Treating, vol.114, issue.1, pp.3-19, 1981.
DOI : 10.1002/bbpc.19650690508

S. Mändl and B. Rauschenbach, Concentration dependent nitrogen diffusion coefficient in expanded austenite formed by ion implantation, Journal of Applied Physics, vol.180, issue.128, pp.9737-9742, 2002.
DOI : 10.1103/PhysRevB.48.11685

F. Ernst, D. Li, H. Kahn, G. M. Michal, and A. H. Heuer, The carbide M7C3 in low-temperature-carburized austenitic stainless steel, The carbide M7C3 in lowtemperature-carburized austenitic stainless steel, pp.2268-2276
DOI : 10.1016/j.actamat.2010.11.058

M. P. Fewell, D. R. Mitchell, J. M. Priest, K. T. Short, and G. A. Collins, The nature of expanded austenite, The nature of expanded austenite, pp.300-306, 2000.
DOI : 10.1016/S0257-8972(00)00804-5