E. Mäder, H. Jacobasch, K. Grundke, and T. Gietzelt, Influence of an optimized interphase on the properties of polypropylene/glass fibre composites, Composites Part A: Applied Science and Manufacturing, vol.27, issue.9, pp.907-912, 1996.
DOI : 10.1016/1359-835X(96)00044-9

F. M. Zhao and N. Takeda, Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part I: experiment results, Composites Part A: Applied Science and Manufacturing, vol.31, issue.11, pp.1203-1214, 2000.
DOI : 10.1016/S1359-835X(00)00085-3

R. L. Zhang, Y. Liu, Y. D. Huang, and L. Liu, Effect of particle size and distribution of the sizing agent on the carbon fibers surface and interfacial shear strength (IFSS) of its composites, Applied Surface Science, vol.287, pp.423-427, 2013.
DOI : 10.1016/j.apsusc.2013.09.174

H. F. Wu, D. W. Dwight, and N. T. Huff, Effects of silane coupling agents on the interphase and performance of glass-fiber-reinforced polymer composites, Composites Science and Technology, vol.57, issue.8, pp.975-983, 1997.
DOI : 10.1016/S0266-3538(97)00033-X

M. Dey, J. M. Deitzel, J. W. Gillespie, and S. Schweiger, Influence of sizing formulations on glass/epoxy interphase properties, Composites Part A: Applied Science and Manufacturing, vol.63, pp.59-67, 2014.
DOI : 10.1016/j.compositesa.2014.04.006

E. Mader, S. Gao, and R. Plonka, Static and dynamic properties of single and multi-fiber/epoxy composites modified by sizings, Composites Science and Technology, vol.67, issue.6, pp.1105-1115, 2007.
DOI : 10.1016/j.compscitech.2006.05.020

M. Munz, H. Sturm, E. Schulz, and G. Hinrichsen, The scanning force microscope as a tool for the detection of local mechanical properties within the interphase of fibre reinforced polymers, Composites Part A: Applied Science and Manufacturing, vol.29, issue.9-10, pp.1251-1259, 1998.
DOI : 10.1016/S1359-835X(98)00077-3

R. M. Winter and J. E. Houston, Interphase Mechanical Properties in Epoxy- Glass Fiber Composites as Measured by Interfacial Force Microscopy, SAND--98-0994C; CONF-980405, 1998.

J. Kim and A. Hodzic, Nanoscale characterisation of thickness and properties of interphase in polymer matrix composites, The Journal of Adhesion, vol.14, issue.4, pp.383-414, 2003.
DOI : 10.1016/S1359-835X(01)00134-8

S. Gao and E. Mäder, Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.4, pp.559-576, 2002.
DOI : 10.1016/S1359-835X(01)00134-8

J. L. Thomason, The interface region in glass fibre-reinforced epoxy resin composites: 3. Characterization of fibre surface coatings and the interphase, Composites, vol.26, issue.7, pp.487-498, 1995.
DOI : 10.1016/0010-4361(95)96806-H

J. Berg and F. R. Jones, The role of sizing resins, coupling agents and their blends on the formation of the interphase in glass fibre composites, Composites Part A: Applied Science and Manufacturing, vol.29, issue.9-10, pp.1261-1272, 1998.
DOI : 10.1016/S1359-835X(98)00091-8

F. Hoecker and J. Karger-kocsis, Effects of the interface on the mechanical response of CF/EP microcomposites and macrocomposites, Composites, vol.25, issue.7, pp.729-738, 1994.
DOI : 10.1016/0010-4361(94)90208-9

E. Mäder, K. Grundke, H. Jacobasch, and G. Wachinger, Surface, interphase and composite property relations in fibre-reinforced polymers, Composites, vol.25, issue.7, pp.739-744, 1994.
DOI : 10.1016/0010-4361(94)90209-7

M. E. Foley, A. A. Obaid, X. Huang, M. Tanoglu, T. A. Bogetti et al., Fiber/matrix interphase characterization using the dynamic interphase loading apparatus, Composites Part A: Applied Science and Manufacturing, vol.33, issue.10, pp.1345-1348, 2002.
DOI : 10.1016/S1359-835X(02)00172-0

M. Tanoglu, S. H. Mcknight, G. R. Palmese, and J. W. Gillespie-jr, The effects of glass-fiber sizings on the strength and energy absorption of the fiber/matrix interphase under high loading rates, Composites Science and Technology, vol.61, issue.2, pp.205-220, 2001.
DOI : 10.1016/S0266-3538(00)00195-0

O. Konur and F. L. Matthews, Effect of the properties of the constituents on the fatigue performance of composites: a review, Composites, vol.20, issue.4, pp.317-328, 1989.
DOI : 10.1016/0010-4361(89)90657-5

G. Shih and L. Ebert, The effect of the fiber/matrix interface on the flexural fatigue performance of unidirectional fiberglass composites, Composites Science and Technology, vol.28, issue.2, pp.137-161, 1987.
DOI : 10.1016/0266-3538(87)90095-9

J. Gassan, A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.3, pp.369-374, 2002.
DOI : 10.1016/S1359-835X(01)00116-6

E. K. Gamstedt, L. A. Berglund, and T. Peijs, Fatigue mechanisms in unidirectional glass-fibre-reinforced polypropylene, Composites Science and Technology, vol.59, issue.5, pp.759-768, 1999.
DOI : 10.1016/S0266-3538(98)00119-5

Z. Hashin, Analysis of Composite Materials???A Survey, Journal of Applied Mechanics, vol.50, issue.3, p.481, 1983.
DOI : 10.1115/1.3167081

Z. Hashin and B. W. Rosen, The Elastic Moduli of Fiber-Reinforced Materials, Journal of Applied Mechanics, vol.31, issue.2, p.223, 1964.
DOI : 10.1115/1.3629590

Z. Hashin, On elastic behaviour of fibre reinforced materials of arbitrary transverse phase geometry, Journal of the Mechanics and Physics of Solids, vol.13, issue.3, pp.119-134, 1965.
DOI : 10.1016/0022-5096(65)90015-3

Z. Hashin, Complex moduli of viscoelastic composites???II. Fiber reinforced materials, International Journal of Solids and Structures, vol.6, issue.6, pp.797-807, 1970.
DOI : 10.1016/0020-7683(70)90018-1

J. Renard, Elaboration, microstructure et comportement des matériaux composites à matrice polymère. Paris: Hermès science publications, 2005.

R. Adams, damping properties analysis of composites, pp.206-217, 1987.

J. J. Caruso and C. C. , Comparison of 3-D finite element results for lamina elastic constants with predictions from SMEs for carbon/epoxy, J. Compos. Technol. Res, vol.8, issue.3, pp.77-83, 1986.

S. W. Tsai and H. T. Hahn, Introduction to composite materials, 1980.

D. A. Hopkins and C. C. , Chamis, A unique set of micromechanics equations for high-temperature metal matrix composites, 1988.

C. C. Chamis, Simplified composite micromechanics equations for hygral, thermal and mechanical properties, " presented at the Ann. Conf, of the Society of the Plastics Industry Reinforced Plastics/Composites Inst, pp.7-11, 1983.

Z. Hashin, Analysis of Properties of Fiber Composites With Anisotropic Constituents, Journal of Applied Mechanics, vol.46, issue.3, p.543, 1979.
DOI : 10.1115/1.3424603

J. Berthelot and J. Berthelot, Matériaux composites: comportement mécanique et analyse des structures, 1996.

T. Chou and T. Ishikawa, One-dimensional micromechanical analysis of woven fabric composites, AIAA Journal, vol.18, issue.12, pp.1714-1721, 1983.
DOI : 10.1115/1.3564618

T. Ishikawa and T. Chou, Elastic Behavior of Woven Hybrid Composites, Journal of Composite Materials, vol.3, issue.1, pp.2-19, 1982.
DOI : 10.1115/1.3564618

T. Ishikawa, Anti-symmetric elastic properties of composite plates of satin weave cloth, Fibre Science and Technology, vol.15, issue.2, pp.127-145, 1981.
DOI : 10.1016/0015-0568(81)90066-X

T. Ishikawa and T. Chou, Stiffness and strength behaviour of woven fabric composites, Journal of Materials Science, vol.11, issue.11, pp.3211-3220, 1982.
DOI : 10.1007/BF01203485

N. K. Naik and V. K. Ganesh, Prediction of on-axes elastic properties of plain weave fabric composites, Composites Science and Technology, vol.45, issue.2, pp.135-152, 1992.
DOI : 10.1016/0266-3538(92)90036-3

N. K. Naik and P. S. Shembekar, Elastic Behavior of Woven Fabric Composites: I???Lamina Analysis, Journal of Composite Materials, vol.26, issue.15, pp.2196-2225, 1992.
DOI : 10.1177/002199838501900504

P. S. Shembekar and N. K. Naik, Elastic Behavior of Woven Fabric Composites: II???Laminate Analysis, Journal of Composite Materials, vol.26, issue.15, pp.2226-2246, 1992.
DOI : 10.1177/002199838501900504

N. K. Naik and P. S. Shembekar, Elastic Behavior of Woven Fabric Composites: III ??? Laminate Design, Journal of Composite Materials, vol.26, issue.17, pp.2522-2541, 1992.
DOI : 10.1177/002199838501900504

N. K. Naik and V. K. Ganesh, An analytical method for plain weave fabric composites, Composites, vol.26, issue.4, pp.281-289, 1995.
DOI : 10.1016/0010-4361(95)93671-6

R. F. Gibson, Principles of composite material mechanics, 2012.

Z. Hashin, Viscoelastic fiber reinforced materials., AIAA Journal, vol.32, issue.8, pp.1411-1417, 1966.
DOI : 10.1007/BF00253942

Z. Hashin, Complex moduli of viscoelastic composites???I. General theory and application to particulate composites, International Journal of Solids and Structures, vol.6, issue.5, pp.539-552, 1970.
DOI : 10.1016/0020-7683(70)90029-6

S. H. Han, H. J. Oh, H. C. Lee, and S. S. Kim, The effect of post-processing of carbon fibers on the mechanical properties of epoxy-based composites, Composites Part B: Engineering, vol.45, issue.1, pp.172-177, 2013.
DOI : 10.1016/j.compositesb.2012.05.022

C. Marieta, E. Schulz, L. Irusta, N. Gabilondo, A. Tercjak et al., Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites, Composites Science and Technology, vol.65, issue.14, pp.2189-2197, 2005.
DOI : 10.1016/j.compscitech.2005.05.008

A. Vazquez, M. Ambrustolo, S. M. Moschiar, M. M. Reboredo, and J. F. Gérard, Interphase modification in unidirectional glass-fiber epoxy composites Compos

C. E. Browning, Composite materials: quality assurance and processing, Symposium on Producibility and Quality Assurance of Composite Materials, 2011.
DOI : 10.1520/STP797-EB

D. Upadhyaya and P. Tsakiropoulos, Evaluation of the effect of sizing levels on transverse flexural and shear strengths of carbon/epoxy composites, Journal of Materials Processing Technology, vol.54, issue.1-4, pp.1-4, 1995.
DOI : 10.1016/0924-0136(95)01912-X

A. P. Mouritz, J. Gallagher, and A. A. Goodwin, Flexural strength and interlaminar shear strength of stitched GRP laminates following repeated impacts, Composites Science and Technology, vol.57, issue.5, pp.509-522, 1997.
DOI : 10.1016/S0266-3538(96)00164-9

T. R. Walter, G. Subhash, B. V. Sankar, and C. F. Yen, Monotonic and cyclic short beam shear response of 3D woven composites, Composites Science and Technology, vol.70, issue.15, pp.2190-2197, 2010.
DOI : 10.1016/j.compscitech.2010.08.022

Z. A. Ishak, Y. W. Leong, M. Steeg, and J. Karger-kocsis, Mechanical properties of woven glass fabric reinforced in situ polymerized poly(butylene terephthalate) composites, Compos. Sci. Technol, vol.67, pp.3-4, 2007.

J. Hawong, D. Shin, and U. Baek, Validation of pure shear test device using finite element method and experimental methods, Engineering Fracture Mechanics, vol.71, issue.2, pp.233-243, 2004.
DOI : 10.1016/S0013-7944(03)00084-5

C. C. Chiao, R. L. Moore, and T. T. Chiao, Measurement of shear properties of fibre composites, Composites, vol.8, issue.3, pp.161-169, 1977.
DOI : 10.1016/0010-4361(77)90011-8

J. Renard, Elaboration, microstructure et comportement des matériaux composites à matrice polymère. Paris: Hermès science publica ons, 2005.

A. Afaghi-khatibi and Y. Mai, Characterisation of fibre/matrix interfacial degradation under cyclic fatigue loading using dynamic mechanical analysis, Composites Part A: Applied Science and Manufacturing, vol.33, issue.11, pp.1585-1592, 2002.
DOI : 10.1016/S1359-835X(02)00117-3

P. S. Chua, Dynamic mechanical analysis studies of the interphase, Polymer Composites, vol.3, issue.5, pp.308-313, 1987.
DOI : 10.1007/978-1-4899-0342-6

S. Dong and R. Gauvin, Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials, Polymer Composites, vol.7, issue.5, pp.414-420, 1993.
DOI : 10.1002/pc.750140508

J. R. Sarasua and J. Pouyet, Dynamic Mechanical Behavior and Interphase Adhesion of Thermoplastic (PEEK, PES) Short Fiber Composites, Journal of Thermoplastic Composite Materials, vol.8, issue.1, pp.2-21, 1998.
DOI : 10.1002/pc.10635

S. Keusch and R. Haessler, Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites, Composites Part A: Applied Science and Manufacturing, vol.30, issue.8, pp.997-1002, 1999.
DOI : 10.1016/S1359-835X(99)00007-X

G. Shih and L. Ebert, The effect of the fiber/matrix interface on the flexural fatigue performance of unidirectional fiberglass composites, Composites Science and Technology, vol.28, issue.2, pp.137-161, 1987.
DOI : 10.1016/0266-3538(87)90095-9

A. Makeev, Interlaminar shear fatigue behavior of glass/epoxy and carbon/epoxy composites, Composites Science and Technology, vol.80, pp.93-100, 2013.
DOI : 10.1016/j.compscitech.2013.03.013

M. Quaresimin and P. A. Carraro, On the investigation of the biaxial fatigue behaviour of unidirectional composites, Composites Part B: Engineering, vol.54, pp.200-208, 2013.
DOI : 10.1016/j.compositesb.2013.05.014

L. Jegou, Y. Marco, V. L. Saux, and S. Calloch, Fast prediction of the W??hler curve from heat build-up measurements on Short Fiber Reinforced Plastic, International Journal of Fatigue, vol.47, pp.259-267, 2013.
DOI : 10.1016/j.ijfatigue.2012.09.007

S. Segerström and I. E. Ruyter, Mechanical and physical properties of carbon???graphite fiber-reinforced polymers intended for implant suprastructures, Dental Materials, vol.23, issue.9, pp.1150-1156, 2007.
DOI : 10.1016/j.dental.2006.06.050

M. Sharma and J. Bijwe, Influence of fiber???matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites, Wear, vol.271, issue.11-12, pp.11-12, 2011.
DOI : 10.1016/j.wear.2011.06.012

S. Park and J. Jin, Effect of Silane Coupling Agent on Interphase and Performance of Glass Fibers/Unsaturated Polyester Composites, Journal of Colloid and Interface Science, vol.242, issue.1, pp.174-179, 2001.
DOI : 10.1006/jcis.2001.7788

E. S. Greenhalgh, Failure analysis and fractography of polymer composites, 2009.

N. Graupner, J. Rößler, G. Ziegmann, and J. Müssig, Fibre/matrix adhesion of cellulose fibres in PLA, PP and MAPP: A critical review of pull-out test, microbond test and single fibre fragmentation test results, Composites Part A: Applied Science and Manufacturing, vol.63, pp.133-148, 2014.
DOI : 10.1016/j.compositesa.2014.04.011

G. P. Tandon and N. J. Pagano, Micromechanical analysis of the fiber push-out and re-push test, Composites Science and Technology, vol.58, issue.11, pp.1709-1725, 1998.
DOI : 10.1016/S0266-3538(98)00037-2

A. Kelly and A. W. Tyson, Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum, Journal of the Mechanics and Physics of Solids, vol.13, issue.6, pp.329-350, 1965.
DOI : 10.1016/0022-5096(65)90035-9

P. Feillard, G. Désarmot, and J. P. Favre, A critical assessment of the fragmentation test for glass/epoxy systems, Composites Science and Technology, vol.49, issue.2, pp.109-119, 1993.
DOI : 10.1016/0266-3538(93)90050-Q

B. Luethi, R. Reber, J. Mayer, E. Wintermantel, J. Janczak-rusch et al., An energy-based analytical push-out model applied to characterise the interfacial properties of knitted glass fibre reinforced PET, Composites Part A: Applied Science and Manufacturing, vol.29, issue.12, pp.1553-1562, 1998.
DOI : 10.1016/S1359-835X(98)00068-2

T. Osada, A. Nakai, and H. Hamada, Initial fracture behavior of satin woven fabric composites, Composite Structures, vol.61, issue.4, pp.333-339, 2003.
DOI : 10.1016/S0263-8223(03)00058-8

C. Rakotoarisoa, Prévision de la durée de vie en fatigue des composites à matrice organique tissés interlock, 2014.

A. Bergeret and P. Krawczak, Liaison renfort/matrice : Définition et caractérisation, Plastique et Composites, 2006.

A. Sjögren, Matrix and interface effects on microcracking in polymer composites, Luleå : Luleå tekniska universite, 1997.

H. Schreier, J. Orteu, and M. A. Sutton, Image Correlation for Shape, Motion and Deformation Measurements, 2009.
DOI : 10.1007/978-0-387-78747-3

URL : https://hal.archives-ouvertes.fr/hal-01729219

R. Eriksen, C. Berggreen, S. W. Boyd, and J. M. Dulieu-barton, Towards high velocity deformation characterisation of metals and composites using Digital Image Correlation, EPJ Web of Conferences, vol.6, p.31013, 2010.
DOI : 10.1051/epjconf/20100631013

Y. Surrel, Some metrological issues in optical full-field techniques, Interferometry XI: Techniques and Analysis, pp.220-231, 2002.
DOI : 10.1117/12.472222

S. V. Lomov, P. Boisse, E. Deluycker, F. Morestin, K. Vanclooster et al., Full-field strain measurements in textile deformability studies, Composites Part A: Applied Science and Manufacturing, vol.39, issue.8, pp.1232-1244, 2008.
DOI : 10.1016/j.compositesa.2007.09.014

URL : https://hal.archives-ouvertes.fr/hal-01657911

J. Payan and C. Hochard, Damage modelling of laminated carbon/epoxy composites under static and fatigue loadings, International Journal of Fatigue, vol.24, issue.2-4, pp.299-306, 2002.
DOI : 10.1016/S0142-1123(01)00085-8

C. Hochard, J. Payan, and C. Bordreuil, A progressive first ply failure model for woven ply CFRP laminates under static and fatigue loads, International Journal of Fatigue, vol.28, issue.10, pp.1270-1276, 2006.
DOI : 10.1016/j.ijfatigue.2006.02.024

URL : https://hal.archives-ouvertes.fr/hal-00106918

I. De-baere, W. Van-paepegem, and J. Degrieck, tensile test, Polymer Composites, vol.38, issue.9, pp.1016-1026, 2009.
DOI : 10.1177/002199839502900502

J. Renard, Elaboration, microstructure et comportement des matériaux composites à matrice polymère. Paris: Hermès science publica ons, 2005.

T. R. Walter, G. Subhash, B. V. Sankar, and C. F. Yen, Monotonic and cyclic short beam shear response of 3D woven composites, Composites Science and Technology, vol.70, issue.15, pp.2190-2197, 2010.
DOI : 10.1016/j.compscitech.2010.08.022

E. S. Greenhalgh, Failure analysis and fractography of polymer composites, 2009.

D. S. De-vasconcellos, F. Touchard, and L. Chocinski-arnault, Tension???tension fatigue behaviour of woven hemp fibre reinforced epoxy composite: A multi-instrumented damage analysis, International Journal of Fatigue, vol.59, pp.159-169, 2014.
DOI : 10.1016/j.ijfatigue.2013.08.029

D. Lariviere, P. Krawczak, C. Tiberi, and P. Lucas, Interfacial properties in commingled yarn thermoplastic composites. Part I: Characterization of the fiber/matrix adhesion, Polymer Composites, vol.28, issue.6, pp.577-588, 2004.
DOI : 10.1177/002199839402800402

G. Shih and L. Ebert, The effect of the fiber/matrix interface on the flexural fatigue performance of unidirectional fiberglass composites, Composites Science and Technology, vol.28, issue.2, pp.137-161, 1987.
DOI : 10.1016/0266-3538(87)90095-9

J. Gassan and A. K. Bledzki, The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene composites, Composites Part A: Applied Science and Manufacturing, vol.28, issue.12, pp.1001-1005, 1997.
DOI : 10.1016/S1359-835X(97)00042-0

N. S. Broyles, K. N. Verghese, S. V. Davis, H. Li, R. M. Davis et al., Fatigue performance of carbon fibre/vinyl ester composites: the effect of two dissimilar polymeric sizing agents, Polymer, vol.39, issue.15, pp.3417-3424, 1998.
DOI : 10.1016/S0032-3861(97)10078-7

J. Gassan, A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.3, pp.369-374, 2002.
DOI : 10.1016/S1359-835X(01)00116-6

K. Noda, A. Takahara, and T. Kajiyama, Fatigue failure mechanisms of short glass-fiber reinforced nylon 66 based on nonlinear dynamic viscoelastic measurement, Polymer, vol.42, issue.13, pp.5803-5811, 2001.
DOI : 10.1016/S0032-3861(00)00897-1

S. D. Pandita, G. Huysmans, M. Wevers, and I. Verpoest, Tensile fatigue behaviour of glass plain-weave fabric composites in on- and off-axis directions, Composites Part A: Applied Science and Manufacturing, vol.32, issue.10, pp.1533-1539, 2001.
DOI : 10.1016/S1359-835X(01)00053-7

S. D. Pandita and I. Verpoest, Tension???tension fatigue behaviour of knitted fabric composites, Composite Structures, vol.64, issue.2, pp.199-209, 2004.
DOI : 10.1016/j.compstruct.2003.08.003

J. A. Casado, I. Carrascal, J. A. Polanco, and F. Gutiérrez-solana, Fatigue failure of short glass fibre reinforced PA 6.6 structural pieces for railway track fasteners, Engineering Failure Analysis, vol.13, issue.2, pp.182-197, 2006.
DOI : 10.1016/j.engfailanal.2005.01.016

M. Naderi, A. Kahirdeh, and M. M. Khonsari, Dissipated thermal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission, Composites Part B: Engineering, vol.43, issue.3, pp.1613-1620, 2012.
DOI : 10.1016/j.compositesb.2011.08.002

L. Jegou, Y. Marco, V. L. Saux, and S. Calloch, Fast prediction of the W??hler curve from heat build-up measurements on Short Fiber Reinforced Plastic, International Journal of Fatigue, vol.47, pp.259-267, 2013.
DOI : 10.1016/j.ijfatigue.2012.09.007

S. V. Rangaraj and L. V. Smith, The nonlinearly viscoelastic response of a woodthermoplastic composite, Mechanics of Time-Dependent Materials, vol.3, issue.2, pp.125-139, 1999.
DOI : 10.1023/A:1009825204920

L. V. Smith and Y. J. Weitsman, The visco-damage mechanical response of swirl-mat composites, Int. J. Fract, vol.97, pp.1-4, 1999.

Y. Meshaka, A. Galtier, S. André, and C. Cunat, Thermomechanical coupling and DNLR formalism. Study of steel behavior under mechanical cyclic loadings, International Journal of Mechanical Sciences, vol.49, issue.5, pp.597-607, 2007.
DOI : 10.1016/j.ijmecsci.2006.09.019

R. F. Gibson, Principles of composite material mechanics, 2012.

A. Afaghi-khatibi and Y. Mai, Characterisation of fibre/matrix interfacial degradation under cyclic fatigue loading using dynamic mechanical analysis, Composites Part A: Applied Science and Manufacturing, vol.33, issue.11, pp.1585-1592, 2002.
DOI : 10.1016/S1359-835X(02)00117-3

M. Dixit, S. Gupta, V. Mathur, K. S. Rathore, K. Sharma et al., Study of glass transition temperature of PMMA and CdS-PMMA composite, Chalcogenide Lett, vol.6, issue.3, pp.131-136, 2009.

Z. Hashin, Complex moduli of viscoelastic composites???I. General theory and application to particulate composites, International Journal of Solids and Structures, vol.6, issue.5, pp.539-552, 1970.
DOI : 10.1016/0020-7683(70)90029-6

Z. Hashin, Complex moduli of viscoelastic composites???II. Fiber reinforced materials, International Journal of Solids and Structures, vol.6, issue.6, pp.797-807, 1970.
DOI : 10.1016/0020-7683(70)90018-1

G. Debotton and L. Tevet-deree, The Response of a Fiber-Reinforced Composite with a Viscoelastic Matrix Phase, Journal of Composite Materials, vol.38, issue.14, pp.1255-1277, 2004.
DOI : 10.1177/002199837601000406

R. F. Gibson and R. Plunkett, Dynamic Mechanical Behavior of Fiber-Reinforced Composites: Measurement and Analysis, Journal of Composite Materials, vol.10, issue.4, pp.325-341, 1976.
DOI : 10.1016/0022-5096(64)90019-5

N. W. Tschoegl, W. G. Knauss, and I. Emri, Poisson's ratio in linear viscoelasticity?a critical review, Mechanics of Time-Dependent Materials, vol.6, issue.1, pp.3-51, 2002.
DOI : 10.1023/A:1014411503170

J. Kim, M. Sham, and J. Wu, Nanoscale characterisation of interphase in silane treated glass fibre composites, Composites Part A: Applied Science and Manufacturing, vol.32, issue.5, pp.607-618, 2001.
DOI : 10.1016/S1359-835X(00)00163-9

J. Kim and A. Hodzic, Nanoscale characterisation of thickness and properties of interphase in polymer matrix composites, The Journal of Adhesion, vol.14, issue.4, pp.383-414, 2003.
DOI : 10.1016/S1359-835X(01)00134-8

S. Gao and E. Mäder, Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites, Composites Part A: Applied Science and Manufacturing, vol.33, issue.4, pp.559-576, 2002.
DOI : 10.1016/S1359-835X(01)00134-8

M. Munz, H. Sturm, E. Schulz, and G. Hinrichsen, The scanning force microscope as a tool for the detection of local mechanical properties within the interphase of fibre reinforced polymers, Composites Part A: Applied Science and Manufacturing, vol.29, issue.9-10, pp.1251-1259, 1998.
DOI : 10.1016/S1359-835X(98)00077-3

R. M. Winter and J. E. Houston, Interphase Mechanical Properties in Epoxy- Glass Fiber Composites as Measured by Interfacial Force Microscopy, SAND--98-0994C; CONF-980405, 1998.

G. M. Pharr, W. C. Oliver, and F. R. Brotzen, On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation, Journal of Materials Research, vol.26, issue.03, pp.613-617, 1992.
DOI : 10.1016/0020-7683(87)90116-8

G. Guillonneau, Nouvelles techniques de nano-indentation pour des conditions expérimentales diffciles : très faibles enfoncements, surfaces rugueuses, température, Ecole centrale de Lyon, 2012.

X. Wu and Y. Hong, Microstructure and mechanical properties at TiCp/Ni-alloy interfaces in laser-synthesized coatings, Materials Science and Engineering: A, vol.318, issue.1-2, 2001.
DOI : 10.1016/S0921-5093(01)01394-6

M. Hardiman, Nanoindentation of Fibrous Composite Microstructures: Experimentation and Finite Element Investigation

J. Gregory and S. Spearing, Nanoindentation of neat and polymers in polymer?matrix composites, Composites Science and Technology, vol.65, issue.3-4, pp.3-4, 2005.
DOI : 10.1016/j.compscitech.2004.09.001

D. Tranchida, S. Piccarolo, J. Loos, and A. Alexeev, Accurately evaluating Young???s modulus of polymers through nanoindentations: A phenomenological correction factor to the Oliver and Pharr procedure, Applied Physics Letters, vol.89, issue.17, p.171905, 2006.
DOI : 10.3139/217.920267

K. Durst, B. Backes, and M. Göken, Indentation size effect in metallic materials: Correcting for the size of the plastic zone, Scripta Materialia, vol.52, issue.11, pp.1093-1097, 2005.
DOI : 10.1016/j.scriptamat.2005.02.009

M. R. Vanlandingham, J. S. Villarrubia, W. F. Guthrie, and G. F. Meyers, Nanoindentation of polymers: an overview, Macromolecular symposia, pp.15-44, 2001.
DOI : 10.1002/1521-3900(200103)167:1<15::AID-MASY15>3.0.CO;2-T

H. F. Wu, D. W. Dwight, and N. T. Huff, Effects of silane coupling agents on the interphase and performance of glass-fiber-reinforced polymer composites, Composites Science and Technology, vol.57, issue.8, pp.975-983, 1997.
DOI : 10.1016/S0266-3538(97)00033-X

H. Moulinec and P. Suquet, A numerical method for computing the overall response of nonlinear composites with complex microstructure, Computer Methods in Applied Mechanics and Engineering, vol.157, issue.1-2, pp.69-94, 1998.
DOI : 10.1016/S0045-7825(97)00218-1

URL : https://hal.archives-ouvertes.fr/hal-01282728

T. Mura, Micromechanics of Defects in Solids (2nd rev. ed.), M. Nijhoff ; Distributors for the U.S. and Canada, 1987.
DOI : 10.1115/1.3176116

J. C. Michel, H. Moulinec, and P. Suquet, A computational scheme for linear and non???linear composites with arbitrary phase contrast, International Journal for Numerical Methods in Engineering, vol.58, issue.12, pp.139-160, 2001.
DOI : 10.1016/S0266-3538(97)00162-0

H. Moulinec and F. Silva, Comparison of three accelerated FFT-based schemes for computing the mechanical response of composite materials, International Journal for Numerical Methods in Engineering, vol.42, issue.2, pp.960-985, 2014.
DOI : 10.1016/j.ijsolstr.2004.06.048

URL : https://hal.archives-ouvertes.fr/hal-00787089

P. Eisenlohr, M. Diehl, R. A. Lebensohn, and F. Roters, A spectral method solution to crystal elasto-viscoplasticity at finite strains, International Journal of Plasticity, vol.46, pp.37-53, 2013.
DOI : 10.1016/j.ijplas.2012.09.012

. Propriétés-de-statique and . De-fatigue, Il faut donc améliorer l'adhésion des charges OP930 avec la matrice ou s'orienter vers d'autres solutions ignifugeantes

J. Jordan, K. I. Jacob, R. Tannenbaum, M. A. Sharaf, and I. Jasiuk, Experimental trends in polymer nanocomposites???a review, Materials Science and Engineering: A, vol.393, issue.1-2, pp.1-11, 2005.
DOI : 10.1016/j.msea.2004.09.044

B. Friederich, Développement de Nouveaux systèmes retardateurs de flammes à base de nanocomposites plus respectueux de l'environnement, Thèse doctorale, 2011.

T. Ramanathan, S. Stankovich, D. A. Dikin, H. Liu, H. Shen et al., Graphitic nanofillers in PMMA nanocomposites???An investigation of particle size and dispersion and their influence on nanocomposite properties, Journal of Polymer Science Part B: Polymer Physics, vol.41, issue.15, pp.2097-2112, 2007.
DOI : 10.1002/3527602127

A. V. Shenoy, Rheology of Filled Polymer Systems, 1999.
DOI : 10.1007/978-94-015-9213-0

D. Ciprari, K. Jacob, and R. Tannenbaum, Characterization of Polymer Nanocomposite Interphase and Its Impact on Mechanical Properties, Macromolecules, vol.39, issue.19, pp.6565-6573, 2006.
DOI : 10.1021/ma0602270

N. Cinausero, Etude de la dégradation thermique et de la réaction au feu de nanocomposites à matrice PMMA et PS, UNIVERSITE MONTPELLIER II, 2009.

S. A. Ramazani, A. Rahimi, M. Frounchi, and S. Radman, Investigation of flame retardancy and physical???mechanical properties of zinc borate and aluminum hydroxide propylene composites, Materials & Design, vol.29, issue.5, pp.1051-1056, 2008.
DOI : 10.1016/j.matdes.2007.04.003

B. J. Ash, D. F. Rogers, C. J. Wiegand, L. S. Schadler, R. W. Siegel et al., Mechanical properties of Al2O3/polymethylmethacrylate nanocomposites, Polymer Composites, vol.2, issue.6, pp.1014-1025, 2002.
DOI : 10.1007/978-1-4899-3176-4

Y. S. Thio, A. S. Argon, and R. E. Cohen, Role of interfacial adhesion strength on toughening polypropylene with rigid particles, Polymer, vol.45, issue.10, pp.3139-3147, 2004.
DOI : 10.1016/j.polymer.2004.02.064