, D'après les résultats obtenus, c'est l'échantillon correspondant au rapport OP930/ATH égal à 10/15 qui présente les meilleurs pHRR et THR pour un temps d'ignition parmi les plus importants. Cependant, le taux de fumées dégagées n'est pas le plus faible et le rapport CO/(CO+CO2) apparaît assez erratique par comparaison avec les autres échantillons

, Le meilleur résultat de pHRR est obtenu avec le mélange correspondant au rapport OP930/ATH égal à 10/30. Cependant, il n'y a pas d'amélioration significative du temps d'ignition, ni de la chaleur totale dégagée. L'augmentation de la quantité de fumées dégagées et du rapport CO/(CO+CO2) est à relier à l'augmentation du taux de charge en OP930. Par contre, la quantité de fumées dégagée pour l'échantillon avec 40% d'ATH seul n'est que légèrement plus importante que pour l'échantillon ne renfermant que 25% d'ATH seul. L'évolution des courbes de pertes de masse et de quantité totale de fumées dégagées est similaire à celle observée, L'augmentation du taux de charge global de 25% à 40% provoque en général une diminution significative de pHRR (Figure D-11 et Tableau D-11)

, Les surfaces occupées par les molécules d'acide phosphoriques (AoP) estimée par Alberola et coll, The European Flame Retardants Association, 2007.

J. M. Brigonon, E. Martinez, S. Sureau, and D. Bromo-diphenylethers, INERIS -Données technico-économiques sur les substances chimiques en France, 2006.

A. Riu, Devenir des retardateurs de flammes bromés chez le rat et l'homme: caractérisation des métabolites et évaluation de l'exposition foetale, 2006.

A. Laachachi, Influence of Sb2O3 particles as filler on the thermal stability and flammability properties of poly(methyl methacrylate) (PMMA), Polym. Degrad. Stab, vol.85, issue.1, pp.641-646, 2004.

R. M. Jones, Mechanics of composite materials, 1975.

S. Drapier, Mécanique des Composites Hautes Performances, 2012.

L. Gendre, Les grandes familles de matériaux composites

J. Aucher, Etude comparative du comportement composites à matrice thermoplastique ou thermodurcissable, 2009.
URL : https://hal.archives-ouvertes.fr/tel-00557897

S. Dubord, Introduction to plastics

L. Gendre, Matériaux composites et structures composites

B. Christophe, Fibres naturelles de renfort pour matériaux composites. Techniques de l'ingénieur, p.142, 2013.

N. Piccirelli, Les composites dans l'industrie automobile. Techniques de l'ingénieur, p.5600, 2011.

L. Merad, Etude par Spectroscopie Raman et modelisation d'une resine composit RTM, 2010.

M. Carus, L. Dammer, and L. Scholz, Biocomposites: 350,000 t production of wood and natural fibre composites in the European Union in 2012, 2014.

, Le glossaire des matériaux composites, 2006.

A. Charmetant, Approche hyperelastique pour la simulation des renforts fibreux en grandes transformations, 2011.

, Thermoplastic composite for aerospace. 2010: www.iapd.org

J. and Y. Grunevald, Les composites en construction ferroviaire. Techniques de l'ingénieur, p.5650, 2000.

P. Cognard, Collage des composites -Secteurs routier et ferroviaire. Techniques de l'ingénieur, vol.7627, 2003.

P. Cognard, Collage des composites -Secteur aéronautique. Techniques de l'ingénieur, vol.7626, 2003.

C. Jacques, Les composites en aérospatiale

S. Freissinet, Inquiétude sur les nouveaux avions en composite

E. Guillaume, Essais de comportement au feu dans les transports. Techniques de l'ingénieur, p.3255, 2010.

S. Freissinet, Inquiétude sur les nouveaux avions en composite

B. Serge, D. René, and S. Duquesne,

B. Friederich, Développement de nouveaux systèmes retardateurs de flammes à base de nanocomposites plus respectueux de l'environnement, 2011.

G. Wang, C. Wang, and C. Chen, The flame-retardant material -1. Studies on thermal characteristics and flame retardance behavior of phosphoruscontaining copolymer of methyl methacrylate with 2-methacryloxyethyl phenyl phosphate, Polym. Degrad. Stab, vol.91, issue.11, pp.2683-2690, 2006.

F. Laoutid, Développement de nouveaux systèmes retardateurs de flamme utilisant des composés minéraux et organo-minéraux dans le polyéthylène téréphtalate, 2003.

G. Pál and H. Macskásy, Plastics, their behaviour in fires, Studies in Polymer Science, vol.6, 1991.

J. Troitzsch, International Plastics Flammability Handbook, 1990.

C. Vovelle and J. L. Delfau, Combustion des plastiques. Techniques de l'ingénieur, 1997.

D. Véronique and J. Vandooren, Chimie de la combustion, flammes à base d'hydrocarbures. Techniques de l'ingénieur, p.6210, 2004.

T. R. Hull, Combustion toxicity of fire retarded EVA, Polym. Degrad. Stab, vol.77, issue.2, pp.235-242, 2002.

R. E. Lyon and R. N. Walters, Pyrolysis combustion flow calorimetry, J. Anal. Appl. Pyrolysis, vol.71, issue.1, pp.27-46, 2004.

D. M. Allison, A. J. Marchand, and R. M. Morchat, Fire performance of composite materials in ships and offshore structure, Mar. Struct, vol.4, pp.129-140, 1991.

L. K. Kucner and H. L. Mcmanus, Experimental studies of composite laminates damaged by fire, Proceedings of the 26th International SAMPE Technical Conference, pp.17-20, 1994.

A. P. Mouritz and Z. Mathys, Post-fire mechanical properties of marine polymer composites, Compos. Struct, vol.47, issue.1-4, pp.643-653, 1999.

A. P. Mouritz and Z. Mathys, Mechanical properties of fire-damaged glass-reinforced phenolic composites, Fire Mater, vol.24, issue.2, pp.67-75, 2000.

A. P. Mouritz and Z. Mathys, Post-fire mechanical properties of glass-reinforced polyester composites, Compos. Sci. Technol, vol.61, issue.4, pp.475-490, 2001.

A. P. Mouritz and A. G. Gibson, Fire Properties of Polymer Composite Materials, vol.143, 2006.

A. Tewarson and D. P. Macaione, POLYMERS AND COMPOSITES -AN EXAMINATION OF FIRE SPREAD AND GENERATION OF HEAT AND FIRE PRODUCTS, Journal of Fire Sciences, vol.11, issue.5, pp.421-441, 1993.

U. Sorathia, H. Telegadas, M. Bergen, . Characteristics, . Phenolic et al.,

, Moving Forward with 50 Years of Leadership in Advanced Materials -39th International Sampe Symposium and Exhibition, vol.39, pp.2991-3002, 1994.

L. Bras and M. , Comparative study of the fire behaviour of glass-fibre reinforced unsaturated polyesters using a cone calorimeter, Polymers & Polymer Composites, vol.6, issue.8, pp.535-539, 1998.

A. G. Gibson and J. Hume, FIRE PERFORMANCE OF COMPOSITE PANELS FOR LARGE MARINE STRUCTURES. Plastics Rubber and Composites Processing and Applications, vol.23, pp.175-183, 1995.

J. R. Brown and Z. Mathys, Reinforcement and matrix effects on the combustion properties of glass reinforced polymer composites, Composites Part a-Applied Science and Manufacturing, vol.28, issue.7, pp.675-681, 1997.

S. B. Sastri, Flammability characteristics of phthalonitrile composites, 42nd International SAMPE Symposium and Exhibition on Evolving Technologies for the Competitive Edge (42nd ISSE, 1997.

J. R. Brown and N. A. Stjohn, Fire-retardant low-temperature-cured phenolic resins and composites, Trends in Polymer Science, vol.4, issue.12, pp.416-420, 1996.

. Freedonia-group, Annual growth of 4.7% forecast for flame retardants, pp.10-11, 2008.

, The Freedonia Group: World demand for flame retardants forecast to grow 5.4% per year till, p.11, 2013.

J. Brossas, Retardateurs de flammes. Techniques de l'ingénieur, 1999.

J. Troitzsch, Plastics flammability handbook: principles, regulations, testing, and approval, 2004.

S. V. Levchik, Introduction to Flame Retardancy and Polymer Flammability

N. J. Hoboken and . Ed, Flame retardant polymer nanocomposites, pp.1-22, 2007.

J. Paul and T. Svetlana, Reactive modifications of some chain-and step-growth polymers with phosphorus-containing compounds: effects on flame retardance-a review, Polym. Adv. Technol, vol.22, issue.4, pp.395-406, 2011.

W. J. Chou, Thermal degradation kinetics and mechanisms of PMEPP and MEPP/MMA copolymer, Polymer, vol.50, issue.21, pp.5094-5102, 2009.

P. Van-nieuwenhuyse, New flame retarded polyamide 6 elaborated bu in situ generation of phosphorylated silica through extrusion process, 4th International Symposium on Nanostructured and Functional Polymer-Based Materials and Nanocomposites, 2008.

S. H. Jiang, Bismuth subcarbonate nanoplates for thermal stability, fire retardancy and smoke suppression applications in polymers: A new strategy, Polym. Degrad. Stab, vol.107, pp.1-9, 2014.

S. Duquesne, Etude des procédés d'ignifugation de substrats polymères par revêtement intumescents -application aux polyuréthanes, 2001.

A. Laachachi, Influence of TiO2 and Fe2O3 fillers on the thermal properties of poly(methyl methacrylate) (PMMA), Mater. Lett, vol.59, issue.1, pp.36-39, 2005.

L. Ferry and J. Lopez-cuesta, Modes de dégradation thermique et inflammation des polymers, 1er Colloque National : «Les polymères et le feu». 2005. IFP-Lyon

F. M. Uhl, Expandable graphite/polyamide-6 nanocomposites, Polym. Degrad. Stab, vol.89, issue.1, pp.70-84, 2005.

M. Döring and J. Diederichs, Halogen-free flame retardants in E&E applications, 2007.

N. Cinausero, Etude de la dégradation thermique et de la réaction au feu de nanocomposites à matrice PMMA et PS, 2008.

J. Green, An overview of the fire retardant chemicals industry, past-present-future, vol.19, p.204, 1995.

C. Manzi-nshuti, J. M. Hossenlopp, and C. A. Wilkie, Fire retardancy of melamine and zinc aluminum layered double hydroxide in poly(methyl methacrylate)

, Polym. Degrad. Stab, vol.93, issue.10, pp.1855-1863, 2008.

K. Smolders and J. Baeyens, Thermal degradation of PMMA in fluidised beds, Waste Manage, vol.24, issue.8, pp.849-857, 2004.

T. Kashiwagi, Effects of weak linkages on the thermal and oxidative degradation of poly(methyl methacrylates), Macromolecules, vol.19, issue.8, p.2168, 1986.

L. E. Manring, Thermal degradation of saturated poly(methyl methacrylate)

, Macromolecules, vol.21, issue.2, pp.528-530, 1988.

L. E. Manring, Thermal degradation of poly(methyl methacrylate). 2. Vinyl-terminated polymer, Macromolecules, vol.22, issue.6, p.2677, 1989.

L. E. Manring, D. Y. Sogah, and G. M. Cohen, Thermal degradation of poly(methyl methacrylate). 3. Polymer with head-to-head linkages, Macromolecules, vol.22, issue.12, p.4654, 1989.

L. E. Manring, Thermal degradation of poly(methyl methacrylate). 4. Random side-group scission, Macromolecules, vol.24, issue.11, pp.3304-3309, 1991.

B. J. Holland and J. N. Hay, The kinetics and mechanisms of the thermal degradation of poly(methyl methacrylate) studied by thermal analysis-Fourier transform infrared spectroscopy, Polymer, vol.42, issue.11, pp.4825-4835, 2001.

W. R. Zeng, S. F. Li, and W. K. Chow, Review on chemical reactions of burning Poly(methyl methacrylate), PMMA. J. Fire Sci, vol.20, issue.5, pp.401-433, 2002.

J. D. Peterson, S. Vyazovkin, and C. A. Wight, Kinetics of the Thermal and Thermo-Oxidative Degradation of Polystyrene

, Macromol. Chem. Phys, vol.202, issue.6, pp.775-784, 2001.

J. E. Brown and T. Kashiwagi, Gas phase oxygen effect on chain scission and monomer content in bulk poly(methyl methacrylate) degraded by external thermal radiation, Polym. Degrad. Stab, vol.52, issue.1, pp.1-10, 1996.

W. R. Zeng, S. F. Li, and W. K. Chow, Preliminary studies on burning behavior of polymethylmethacrylate (PMMA), J. Fire Sci, vol.20, issue.4, pp.297-317, 2002.

M. L. Bras, New intumescent formulations of fire-retardant polypropylenediscussion of the free radical mechanism of the formation of carbonaceous protective material during the thermo-oxidative treatment of the additives, Fire Mater, vol.20, pp.191-203, 1996.

S. Bourbigot, Carbonization mechanisms resulting from intumescence-part II. Association with an ethylene terpolymer and the ammonium polyphosphatepentaerythritol fire retardant system. Carbon, vol.33, p.294, 1995.

F. Samyn, Comprehension des procédés d'ignifugation du polyamide 6, in Chimie organique et macromoléculaire, 2007.

M. , L. Bras, and S. Bourbigot, Fire retarded intumescent thermoplastic formulations, synergy and synergistic agents, a rewie, Fire retardancy of polymers, the use of intumescence, The royal society of chemistry pub, 1998.

H. Kristin, B. Pawlowski, and . Schartel, Flame retardancy mechanisms of aryl phosphates in combination with boehmite in bisphenol A polycarbonate/acrylonitrile-butadienestyrene blends, Polym. Degrad. Stab, vol.93, issue.3, pp.1030-1037, 2008.

C. E. Brown, J. Polym. Sci., Part A: Polym. Chem, vol.24, issue.6, pp.1297-1311, 1986.

, FACA: Environmental Protection Agency, 2010.

G. Camino, N. Grassie, and I. C. Mcneill, Influence of the fire retardant, ammonium polyphosphate, on the thermal degradation of poly(methyl methacrylate), J. Polym. Sci. Polym. Chem. Ed, vol.16, issue.1, p.106, 1978.

G. Camino, L. Costa, and L. Trossarelli, Study of the mechanism of intumescence in fire retardant polymers: Part V-Mechanism of formation of gaseous products in the thermal degradation of ammonium polyphosphate, Polym. Degrad. Stab, vol.12, issue.3, pp.203-211, 1985.

S. Duquesne, Study of the thermal degradation of an aluminium phosphinatealuminium trihydrate combination, Thermochim. Acta, vol.551, pp.175-183, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02043443

H. Kaya and J. Hacaloglu, Thermal degradation of polylactide/aluminium diethylphosphinate, Journal of Analytical and Applied Pyrolysis, vol.110, pp.155-162, 2014.

X. Han, Flame retardancy mechanism of poly(butylene terephthalate)/aluminum diethylphosphinate composites with an epoxy-functional polysiloxane, vol.4, pp.16551-16560, 2014.

J. Green, An overview of the fire retardant chemicals industry, past-present-future, Fire Mater, vol.19, issue.5, p.204, 1995.

I. M. Joni, Enhancement of the thermal stability and mechanical properties of a PMMA/aluminum trihydroxide composite synthesized via bead milling, Powder Technology, vol.204, issue.1, pp.145-153, 2010.

C. Basaran, S. H. Nie, and C. S. Hutchins, Time dependent behavior of a particle filled composite PMMA/ATH at elevated temperatures, J. Compos. Mater, vol.42, pp.2003-2025, 2008.

E. M. Gunel and C. Basaran, Micro-deformation mechanisms in thermoformed alumina trihydrate reinforced poly(methyl methacrylate), Mater. Sci. Eng., A, vol.523, issue.1-2, pp.160-172, 2009.

F. Laoutid, Effect of magnesium dihydroxide nanoparticles on thermal degradation and flame resistance of PMMA nanocomposites, Polym. Adv. Technol, vol.22, issue.12, pp.1713-1719, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02949489

M. L. Bras, C. A. Wilkie, and S. Bourbigot, Fire retardancy of polymers: new applications of mineral fillers, 2005.

J. Tronto, Conducting Polymers / Layered Double Hydroxides Intercalated Nanocomposites, Materials Science -Advanced Topics, 2013.

A. Roy, C. Forano, and J. P. Besse, Layered double hydroxides: synthesis and postsynthesis modification, Layered double hydroxides: present and future, pp.1-40, 2001.

G. Camino, Effect of hydroxides and hydroxycarbonate structure on fire retardant effectiveness and mechanical properties in ethylene-vinyl acetate copolymer, Polym. Degrad. Stab, vol.74, issue.3, pp.457-464, 2001.

G. A. Wang, C. C. Wang, and C. Y. Chen, Preparation and characterization of layered double hydroxides -PMMA nanocomposites by solution polymerization, J. Inorg. Organomet. Polym, vol.15, issue.2, pp.239-251, 2005.

A. Laachachi, Use of oxide nanoparticles and organoclays to improve thermal stability and fire retardancy of poly(methyl methacrylate), Polym. Degrad. Stab, vol.89, issue.2, pp.344-352, 2005.

A. Laachachi, Fire retardant systems in poly(methyl methacrylate): Interactions between metal oxide nanoparticles and phosphinates, Polym. Degrad. Stab, vol.92, issue.1, pp.61-69, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00327256

A. Laachachi, A comparison of the role of boehmite (AlOOH) and alumina (Al2O3) in the thermal stability and flammability of poly(methyl methacrylate), Polym. Degrad. Stab, vol.94, issue.9, pp.1373-1378, 2009.

N. Cinausero, Influence of the surface modification of alumina nanoparticles on the thermal stability and fire reaction of PMMA composites, Polym. Adv. Technol, vol.19, issue.6, pp.701-709, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00357806

A. Aruchamy, Viscoelastic properties and thermal degradation kinetics of silica/PMMA nanocomposites, Materials Research Society Symposium Proceedings. 1992. 123, vol.84, pp.545-553, 2004.

A. B. Morgan, Thermal and flammability properties of a silica-PMMA nanocomposite. Abstracts of Papers of the, 0220.

Y. Zhao and D. A. Schiraldi, Thermal and mechanical properties of polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites. Polymer, vol.46, pp.11640-11647, 2005.

N. Amir, A. Levina, and M. S. Silverstein, Nanocomposites through copolymerization of a polyhedral oligomeric silsesquioxane and methyl methacrylate, J. Polym. Sci., Part A: Polym. Chem, vol.45, issue.18, pp.4264-4275, 2007.

H. Vahabi, Combination effect of polyhedral oligomeric silsesquioxane (POSS) and a phosphorus modified PMMA, flammability and thermal stability properties, Mater. Chem. Phys, vol.136, issue.2-3, p.770, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00728438

P. Jash and C. A. Wilkie, Effects of surfactants on the thermal and fire properties of poly(methyl methacrylate)/clay nanocomposites, Polym. Degrad. Stab, vol.88, issue.3, pp.401-406, 2005.

K. Chrissafis and D. Bikiaris, Can nanoparticles really enhance thermal stability of polymers? Part I: An overview on thermal decomposition of addition polymers, Thermochim. Acta, vol.523, issue.1-2, p.24, 2011.

S. Su and C. A. Wilkie, Exfoliated poly(methyl methacrylate) and polystyrene nanocomposites occur when the clay cation contains a vinyl monomer, J. Polym. Sci. A Polym. Chem, vol.41, issue.8, p.1135, 2003.

D. R. Paul and L. M. Robeson, Polymer nanotechnology: nanocomposites. Polymer, vol.49, p.3204, 2008.

A. Blumstein, Polymerization of adsorbed monolayers: II. Thermal degradation of the inserted polymers, J. Polym. Sci, vol.3, pp.2665-2673, 1965.

K. Prafulla, R. Sahoo, and . Samal, Fire retardancy and biodegradability of poly(methyl methacrylate)/montmorillonite nanocomposite, Polym. Degrad. Stab, vol.92, issue.9, pp.1700-1707, 2007.

R. Rajkiran, U. Tiwari, and . Natarajan, Thermal and mechanical properties of melt processed intercalated poly(methyl methacrylate)-organoclay nanocomposites over a wide range of filler loading, Polym. Int, vol.57, issue.5, pp.738-743, 2008.

L. J. Poppe,

M. Baziz, Synthèses et caractérisations de nanocomposites polyaniline -sepiolite, 2010.

N. H. Huang, Thermal Stability and Degradation Kinetics of Poly(Methyl Methacrylate)/Sepiolite Nanocomposites by Direct Melt Compounding, J. Macromol. Sci., Phys, vol.52, issue.4, pp.521-529, 2013.

M. M. Treacy, T. W. Ebbesen, and J. M. Gibson, Exceptionally high Young's modulus observed for individual carbon nanotubes, Nature, vol.381, issue.6584, pp.678-680, 1996.

Z. X. Jin, Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites, Chem. Phys. Lett, vol.337, issue.1-3, pp.43-47, 2001.

T. Kashiwagi, Relation between the viscoelastic and flammability properties of polymer nanocomposites, Polymer, vol.49, pp.4358-4368, 1920.

T. Kashiwagi, Flammability properties of polymer nanocomposites with singlewalled carbon nanotubes: effects of nanotube dispersion and concentration, Polymer, vol.46, issue.2, pp.471-481, 2005.

Y. Quach, Barrier effect of flame retardant systems in poly(methyl methacrylate): Study of the efficiency of the surface treatment by octylsilane of silica nanoparticles in combination with phosphorous fire retardant additives, Fire Mater, vol.36, issue.7, pp.590-602, 2012.

B. B. Troitskii, Retardation of thermal degradation of PMMA and PVC by C60, Eur. Polym. J, vol.33, p.1590, 1997.

M. Lewin, Synergism and catalysis in flame retardancy of polymers, Polym. Adv. Technol, vol.12, pp.215-222, 2001.

A. Laachachi, Effect of Al2O3 and TiO2 nanoparticles and APP on thermal stability and flame retardance of PMMA, Polym. Adv. Technol, vol.17, issue.4, pp.327-334, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00327253

X. Wang, L. Wu, and J. Li, Synergistic flame retarded poly(methyl methacrylate) by nano-ZrO2 and triphenylphosphate, J. Therm. Anal. Calorim, vol.103, issue.2, pp.741-746, 2011.

T. Orhan, Thermal degradation mechanisms of aluminium phosphinate, melamine polyphosphate and zinc borate in poly(methyl methacrylate), Polym. Degrad. Stab, vol.96, issue.10, pp.1780-1787, 2011.

K. Isitman, Nanoclay and carbon nanotubes as potential synergists of an organophosphorus flame-retardant in poyl(methyl methacrylate), Polym. Degrad. Stab, vol.95, pp.1523-1532, 2010.

J. Ruste, Microscopie électronique à balayage -Principe et équipement. Techniques de l'ingénieur, p.2013

J. L. Martin and A. George, Traité des matériaux: Tome 3, Caractérisation expérimentale des matériaux : analyse par rayons X, électrons et neutrons, Presses Polytechniques et Universitaires Romandes, pp.3-14, 1998.

P. Colomban, Imagerie Raman de matériaux et dispositifs hétérogènes. Techniques de l'ingénieur, p.5, 2002.

J. Barbillat, Technique d'ingénieur, 1999. P2865. 153. F. Rouessac and A. Rouessac, Spectrométrie de résonance magnétique nucléaire. Analyse chimique, Méthodes et techniques instrumentales modernes, Fire Saf. J, vol.18, issue.3, p.272, 1992.

V. Babrauskas, W. H. , M. Janssens, and S. Yusa, A cone calorimeter for controlledatmosphere studies. Fire and Materials, 1992, vol.16, pp.37-43

V. Babrauskas, A cone calorimeter for controlled-atmosphere studies, Fire Mater, vol.16, issue.1, pp.37-43, 1992.

C. Huggett, Estimation of rate of heat release by means of oxygen consumption measurements, Fire Mater, vol.4, issue.2, pp.61-65, 1980.

B. Schartel and T. R. Hull, Development of fire-retarded materials-Interpretation of cone calorimeter data, Fire Mater, vol.31, issue.5, pp.327-354, 2007.

R. A. Susott, Thermal behavior of conifer needle extractives, For. Sci, vol.26, issue.3, pp.147-160, 1980.

R. A. Susott, Characterization of the Thermal Properties of Forest Fuels by Combustible Gas Analysis, For. Sci, vol.28, issue.2, pp.404-420, 1982.

R. A. Susott, F. Shafizadeh, and T. W. Aanerud, A quantitative thermal analysis technique for combustible gas detection, Journal of Fire and Flammability, vol.10, pp.94-140, 1979.

L. Chesné and A. Sainrat, Essais normalisés de réaction au feu, p.3540, 2005.

B. Friederich, A. L. , M. Ferriol, M. Cochez, R. Sonnier et al., Investigation of fire-resistance mechanisms of the ternary system (APP/MPP/TiO2) in PMMA, Polym. Degrad. Stab, vol.97, issue.11, pp.2154-2161, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00772225

G. Krala, A. Ubowska, and K. Kowalczyk, Mechanical and thermal analysis of injection molded poly(methyl methacrylate) modified with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) fire retarder, Polym. Eng. Sci, vol.54, issue.5, pp.1030-1037, 2014.

A. Laachachi, Is expanded graphite acting as flame retardant in epoxy resin? Polymer Degradation and Stability, vol.117, pp.22-29, 2015.

E. Duguet, Fonctionnalisation chimique et/ou encapsulation : quelques exemples de systèmes microcomposites et nanocomposites, 2000.

G. Guerrero, P. H. , and A. Vioux, Organically modified aluminas by grafting and sol-gel processes involving phosphonate derivatives, J. Mater. Chem, vol.11, issue.12, pp.3161-3165, 2001.

G. Alberti, M. C. , U. Costantino, and R. Vivani, Layered and pillared metal (IV) phosphates and phosphonates, Adv. Mater, vol.8, issue.4, pp.291-303, 1996.

G. Guerrero, P. H. Mutin, and A. Vioux, Organically modified aluminas by grafting and sol-gel processes involving phosphonate derivatives, J. Mater. Chem, vol.11, issue.12, pp.3161-3165, 2001.