.. La-biologie-des-protéines-de-blé, 12 La classification des protéines

.. Caractérisation-des-panneaux-de-particules, 21 Classification des panneaux de particules, 22 2.4.2.2. Les exigences en

U. H. Abdullah and A. Pizzi, Tannin-Furfurylalkohol-Klebstoffe f??r Holzwerkstoffe ohne Formaldehyd, European Journal of Wood and Wood Products, vol.44, issue.3, pp.1-131, 2013.
DOI : 10.1016/j.eurpolymj.2008.06.029

C. Aouf, S. Benyahya, A. Esnouf, S. Caillol, B. Boutevin et al., Tara tannins as phenolic precursors of thermosetting epoxy resins, European Polymer Journal, vol.55, pp.186-198, 2014.
DOI : 10.1016/j.eurpolymj.2014.03.034

URL : https://hal.archives-ouvertes.fr/hal-01097131

A. Ballerini, A. Despres, and A. Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels, Holz als Roh- und Werkstoff, vol.59, issue.4, pp.6-477, 2005.
DOI : 10.1007/s00107-005-0048-x

M. C. Basso, S. Giovando, A. Pizzi, A. Celzard, and V. Fierro, Tannin/furanic foams without blowing agents and formaldehyde, Industrial Crops and Products, vol.49, pp.17-22, 2013.
DOI : 10.1016/j.indcrop.2013.04.043

URL : https://hal.archives-ouvertes.fr/hal-01295730

M. C. Basso, A. Pizzi, and A. Celzard, Influence of formulation on the dynamics of preparation of tannin-based foams, Industrial Crops and Products, vol.51, pp.396-400, 2013.
DOI : 10.1016/j.indcrop.2013.09.013

URL : https://hal.archives-ouvertes.fr/hal-01295732

M. C. Basso, S. Giovando, A. Pizzi, M. C. Lagel, and A. Celzard, Alkaline Tannin Rigid Foams, Journal of Renewable Materials, vol.527, issue.3, pp.3-182, 2014.
DOI : 10.1016/j.msea.2010.03.091

URL : https://hal.archives-ouvertes.fr/hal-01295528

M. C. Basso, S. Giovando, A. Pizzi, H. Pasch, N. Pretorius et al., Flexible-elastic copolymerized polyurethane-tannin foams, Journal of Applied Polymer Science, vol.96, issue.21, pp.13-40499, 2014.
DOI : 10.1016/j.polymdegradstab.2011.01.014

URL : https://hal.archives-ouvertes.fr/hal-01295582

S. Bertarione, F. Bonino, F. Cesano, A. Damin, D. Scarano et al., Furfuryl Alcohol Polymerization in H???Y Confined Spaces:?? Reaction Mechanism and Structure of Carbocationic Intermediates, The Journal of Physical Chemistry B, vol.112, issue.9, pp.9-2580, 2008.
DOI : 10.1021/jp073958q

S. Bertarione, F. Bonino, F. Cesano, S. Jain, M. Zanetti et al., Microftir and micro-raman studies of a carbon film prepared from furfuryl alcohol polymerization, The Journal of Physical Chemistry B, vol.113, pp.31-10571, 2009.

E. T. Bisanda, J. Ogola, and . Tesha, Characterisation of tannin resin blends for particle board applications, Cement and Concrete Composites, pp.6-593, 2003.
DOI : 10.1016/S0958-9465(02)00072-0

S. Bouquelet, Protéines alimentaires, 2008.

M. Boury, Les protéines, leur hydrolyse, les protéases, Science et Pêche, vol.88, pp.1-9, 1960.

P. L. Brelid, R. Simonson, O. Bergman, and T. Nilsson, Resistance of acetylated wood to biological degradation, pp.5-331, 2000.

V. J. Brown, Better Bonding with Beans, Environmental Health Perspectives, vol.113, issue.8, pp.538-541, 2005.
DOI : 10.1289/ehp.113-a538

P. Carey and M. Lott, Sand binder systems Part V -Furan no-bake, Foundry Management & Technology, vol.123, issue.17, pp.26-30, 1995.

A. Carretero, Compuesto fenolicos : Taninos, Panorama Actual Med, vol.24, issue.235, pp.633-636, 2000.

X. Chen, H. Li, H. Luo, and M. Qiao, Liquid phase hydrogenation of furfural to furfuryl alcohol over Mo-doped Co-B amorphous alloy catalysts, Applied Catalysis A: General, vol.233, issue.1-2, pp.1-2, 2002.
DOI : 10.1016/S0926-860X(02)00127-8

M. Choura, N. M. Belgacem, and A. Gandini, Acid-Catalyzed Polycondensation of Furfuryl Alcohol:?? Mechanisms of Chromophore Formation and Cross-Linking, Macromolecules, vol.29, issue.11, pp.11-3839, 1996.
DOI : 10.1021/ma951522f

W. Conradie and A. Pizzi, A chemical balance/microdistribution theory -new CCA formulations for soft-rot control?, Material Und Organismen, vol.21, pp.11-31, 1986.

R. Corder, W. Mullen, N. Q. Khan, S. C. Marks, E. G. Wood et al., Red wine procyanidins and vascular health, Nature, vol.54, issue.7119, p.566, 2006.
DOI : 10.1021/jf052260b

S. Deng, X. Li, X. Xie, and G. Du, Reaction mechanism, synthesis and characterization of Urea-Glyoxal (UG) resin, Chinese Journal of Structural Chemistry, vol.32, pp.12-1773, 2013.

S. Deng, G. Du, X. Li, and A. Pizzi, Performance and reaction mechanism of zero formaldehyde-emission urea-glyoxal (UG) resin, Journal of the Taiwan Institute of Chemical Engineers, vol.45, issue.4, pp.4-2029, 2014.
DOI : 10.1016/j.jtice.2014.02.007

URL : https://hal.archives-ouvertes.fr/hal-01597477

S. Deng, G. Du, X. Li, and X. Xie, Performance, Reaction Mechanism, and Characterization of Glyoxal???Monomethylol Urea (G???MMU) Resin, Industrial & Engineering Chemistry Research, vol.53, issue.13, pp.13-5421, 2014.
DOI : 10.1021/ie404278d

S. Deng, A. Pizzi, G. Du, J. Zhang, and J. Zhang, Synthesis, structure, and characterization of glyoxal-urea-formaldehyde cocondensed resins, Journal of Applied Polymer Science, vol.113, issue.21, pp.21-41009, 2014.
DOI : 10.1002/app.30377

G. G. Duthie, S. J. Duthie, and J. A. Kyle, Plant polyphenols in cancer and heart disease: implications as nutritional antioxidants, Nutrition Research Reviews, vol.26, issue.29, pp.1-79, 2000.
DOI : 10.1080/009841096160709

E. Atyqy and M. , Cours de chimie alimentaire : Protéines, peptides et acides aminés, 2013.

L. Y. Foo and R. W. Hemingway, Condensed tanins: reactions of model compounds with furfuryl alcohol and furfuraldehyde, Journal of Wood Chemistry and Technology, vol.5, pp.1-135, 1985.

C. Frazier, Isocyanate wood binder. in handbook of adhesive technology, second edition, 2003.

C. Frihart and J. Wescott, Improved water resistance of bio-based adhesives for wood bonding, 1st International Conference on Environmentally-Compatible Forest Products, 2004.

A. Gandini and M. N. Belgacem, Furans in polymer chemistry, Progress in Polymer Science, vol.22, issue.6, pp.1203-1379, 1997.
DOI : 10.1016/S0079-6700(97)00004-X

R. Garcia, A. Pizzi, and A. Merlin, Ionic polycondensation effects on the radical autocondensation of polyflavonoid tanins: an ESR study, Journal of Applied Polymer Science, vol.65, pp.13-2623, 1997.

R. Garcia, A. Pizzi, and A. Merlin, Ionic polycondensation effects on the radical autocondensation of polyflavonoid tanins: an ESR study, Journal of Applied Polymer Science, vol.65, pp.13-2623, 1997.

R. Garcia and A. Pizzi, Polycondensation and autocondensation networks in polyflavonoid tanins. I. Final networks, Journal of Applied Polymer Science, vol.70, pp.6-1083, 1998.

R. Garcia and A. Pizzi, Polycondensation and autocondensation networks in polyflavonoid tanins. II. Polycondensation versus autocondensation, Journal of Applied Polymer Science, vol.70, pp.6-1093, 1998.

S. Giovando, A. Pizzi, H. Pasch, and N. Pretorius, Structure and oligomers distribution of commercial tara (Caesalpina Spinosa) hydrolysable tannin, Pro Ligno, vol.9, pp.1-22, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01596680

R. Gonzalez, J. M. Figueroa, and H. Gonzalez, Furfuryl alcohol polymerisation by iodine in methylene chloride, European Polymer Journal, vol.38, issue.2, pp.2-287, 2002.
DOI : 10.1016/S0014-3057(01)00090-8

R. Gonzalez, J. Rieumont, J. M. Figueroa, J. Siller, and H. Gonzalez, Kinetics of furfuryl alcohol polymerisation by iodine in methylene dichloride, European Polymer Journal, vol.38, issue.2, pp.2-281, 2002.
DOI : 10.1016/S0014-3057(01)00091-X

. Riechel, High molecular weight plant polyphenolics (tanins) as biological antioxidants, 1998.

J. Hay, C. J. Markhoff-matheny, and B. E. Swanson, Frit bonded abrasive wheel, 1990.

P. J. Hernes and J. I. Hedges, Determination of Condensed Tannin Monomers in Environmental Samples by Capillary Gas Chromatography of Acid Depolymerization Extracts, Analytical Chemistry, vol.72, issue.20, pp.5115-5124, 2000.
DOI : 10.1021/ac991301y

W. E. Hillis and G. Urbach, Reaction of polyphenols with formaldehyde, Journal of Applied Chemistry, vol.14, issue.12, pp.665-673, 1959.
DOI : 10.1042/bj0670239

Y. B. Hoong, M. T. Paridah, C. A. Luqman, M. P. Koh, and Y. F. Loh, Fortification of sulfited tannin from the bark of Acacia mangium with phenol???formaldehyde for use as plywood adhesive, Industrial Crops and Products, vol.30, issue.3, pp.3-416, 2009.
DOI : 10.1016/j.indcrop.2009.07.012

C. Y. Hse, F. Fu, and B. S. Bryant, Development of formaldehyde-based wood adhesives with co-reacted phenol/soybean flour, Conference, 2000.

M. J. Jackson, C. J. Davis, M. P. Hitchiner, and B. Mills, High-speed grinding with CBN grinding wheels ??? applications and future technology, Journal of Materials Processing Technology, vol.110, issue.1, pp.1-78, 2001.
DOI : 10.1016/S0924-0136(00)00869-4

M. Jerez, M. Pinelo, J. Sineiro, and M. J. Nunez, Influence of extraction conditions on phenolic yields from pine bark: assessment of procyanidins polymerization degree by thiolysis, Food Chemistry, vol.94, issue.3, pp.3-406, 2006.
DOI : 10.1016/j.foodchem.2004.11.036

D. P. Kamdem, A. Pizzi, and A. Jermannaud, Durability of heat-treated wood, Holz als Roh- und Werkstoff, vol.60, issue.1, 2002.
DOI : 10.1007/s00107-001-0261-1

S. Kim, Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission, Bioresource Technology, vol.100, issue.2, pp.2-744, 2009.
DOI : 10.1016/j.biortech.2008.06.062

J. W. Kirkpatrick and H. M. Barnes, Copper naphthenate treatments for engineered wood composite panels, Bioresource Technology, vol.97, issue.15, pp.15-1959, 2006.
DOI : 10.1016/j.biortech.2005.08.007

C. Lacoste, M. C. Basso, A. Pizzi, M. P. Laborie, A. Celzard et al., Pine tannin-based rigid foams: Mechanical and thermal properties, Industrial Crops and Products, vol.43, pp.245-250, 2013.
DOI : 10.1016/j.indcrop.2012.07.039

URL : https://hal.archives-ouvertes.fr/hal-01296306

C. Lacoste, A. Pizzi, M. C. Basso, M. Laborie, and A. Celzard, Pinus pinaster tannin/furanic foams: PART I. Formulation, Industrial Crops and Products, vol.52, pp.450-456, 2014.
DOI : 10.1016/j.indcrop.2013.10.044

URL : https://hal.archives-ouvertes.fr/hal-01295576

C. Lacoste, A. Pizzi, M. P. Laborie, and A. Celzard, Pinus pinaster tannin/furanic foams: Part II. Physical properties, Industrial Crops and Products, vol.61, pp.531-536, 2014.
DOI : 10.1016/j.indcrop.2014.04.034

URL : https://hal.archives-ouvertes.fr/hal-01295535

C. Lacoste, M. C. Basso, A. Pizzi, A. Celzard, E. E. Ebang et al., Pine (P. pinaster) and quebracho (S. lorentzii) tannin-based foams as green acoustic absorbers, Industrial Crops and Products, vol.67, pp.70-73, 2015.
DOI : 10.1016/j.indcrop.2014.12.018

URL : https://hal.archives-ouvertes.fr/hal-01294760

P. E. Laks, P. A. Mckaig, and R. W. Hemingway, Flavonoid Biocides: Wood Preservatives Based on Condensed Tannins, Holzforschung, vol.28, issue.1, pp.5-299, 1988.
DOI : 10.1086/284065

K. W. Lee and C. V. Rue, Vitrified bonded grinding wheel with mixtures of sol gel aluminous abrasives and silicon carbide, 1992.

H. Lei, Synthetic and natural materials for wood adhesive resins, 2009.

H. Lei, A. Pizzi, P. Navarrete, S. Rigolet, A. Redl et al., Gluten protein adhesives for wood panels, Journal of Adhesion Science and Technology, vol.24, pp.8-10, 2010.

X. Li, M. C. Basso, V. Fierro, A. Pizzi, and A. Celzard, Chemical Modification of Tannin/Furanic Rigid Foams by Isocyanates and Polyurethanes, Maderas. Ciencia y tecnolog??a, vol.14, issue.ahead, pp.3-257, 2012.
DOI : 10.4067/S0718-221X2012005000001

X. Li, H. A. Essawy, A. Pizzi, L. Delmotte, K. Rode et al., Modification of tannin based rigid foams using oligomers of a hyperbranched poly(amineester ), Journal of Polymer Research, vol.19, pp.12-13, 2012.

X. Li, A. Pizzi, M. Cangemi, V. Fierro, and A. Celzard, Flexible natural tannin-based and protein-based biosourced foams, Industrial Crops and Products, vol.37, issue.1, pp.1-389, 2012.
DOI : 10.1016/j.indcrop.2011.12.037

X. Li, A. Nicollin, A. Pizzi, X. Zhou, A. Sauget et al., Natural tannin???furanic thermosetting moulding plastics, RSC Advances, vol.416, issue.39, pp.39-17732, 2013.
DOI : 10.1016/j.tca.2002.12.002

URL : https://hal.archives-ouvertes.fr/hal-01593759

X. Li, V. K. Srivastava, A. Pizzi, A. Celzard, and J. Leban, Nanotube-reinforced tannin/furanic rigid foams, Industrial Crops and Products, vol.43, pp.636-639, 2013.
DOI : 10.1016/j.indcrop.2012.08.008

URL : https://hal.archives-ouvertes.fr/hal-01296310

X. Li, A. Pizzi, C. Lacoste, V. Fierro, and A. Celzard, Physical Properties of Tannin/Furanic Resin Foamed With Different Blowing Agents, BioResources, vol.8, issue.1, pp.1-743, 2013.
DOI : 10.15376/biores.8.1.743-752

URL : https://hal.archives-ouvertes.fr/hal-01296301

C. Manach, G. Williamson, C. Morand, A. Scalbert, and C. Remesy, Bioavailability and bioefficacy of polyphenols in humans. I. Review of 97 bioavailability studies, The American Journal of Clinical Nutrition, vol.80, issue.1, pp.1-230, 2005.
DOI : 10.1002/(SICI)1097-0010(20000515)80:7<1118::AID-JSFA570>3.0.CO;2-9

E. Masson, A. Merlin, and A. Pizzi, Comparative kinetics of induced radical autocondensation of polyflavonoid tanins. I. Modified and nonmodified tanins, Journal of Applied Polymer Science, vol.60, pp.2-263, 1996.

E. Masson, A. Pizzi, and A. Merlin, Comparative kinetics of the induced radical autocondensation of polyflavonoid tanins. III. Micellar reactions vs. cellulose surface catalysis, Journal of Applied Polymer Science, vol.60, pp.10-1655, 1996.

E. Masson, A. Pizzi, and M. Merlin, Comparative kinetics of the induced radical autocondensation of polyflavonoid tanins. II. Flavonoid units effects, Journal of Applied Polymer Science, vol.64, pp.2-243, 1997.

N. Meikleham and A. Pizzi, Acid- and alkali-catalyzed tannin-based rigid foams, Journal of Applied Polymer Science, vol.53, issue.11, pp.11-1547, 1994.
DOI : 10.1002/app.1994.070531117

N. Meikleham, A. Pizzi, and A. Stephanou, Induced accelerated autocondensation of polyflavonoid tanins for phenolic polycondensates. I. 13C-NMR, 29Si-NMR, X-Ray, and polarimetry studies and mechanism, Journal of Applied Polymer Science, vol.54, pp.12-1827, 1994.

A. Merlin and A. Pizzi, An ESR study of the silica-induced autocondensation of polyflavonoid tanins, Journal of Applied Polymer Science, vol.59, pp.6-945, 1996.

. Ministère-de-l-'ecologie, du Développement Durable et de l'Energie. 2012 Étiquetage français sur les émissions COV

D. Molle and P. M. Patry, RT 2012 et RT Existant: Réglementation thermique et efficacité énergétique, 2011.

A. Moubarik, A. Pizzi, A. Allal, F. Charrier, and B. Charrier, Cornstarch and tannin in phenol???formaldehyde resins for plywood production, Industrial Crops and Products, vol.30, issue.2, pp.2-188, 2009.
DOI : 10.1016/j.indcrop.2009.03.005

URL : https://hal.archives-ouvertes.fr/hal-01584331

B. M. Nagaraja, V. S. Kumar, V. Shasikala, A. H. Padmasri, B. Sreedhar et al., A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol, Catalysis Communications, vol.4, issue.6, pp.6-287, 2003.
DOI : 10.1016/S1566-7367(03)00060-8

K. S. Narayanan, S. S. Vagarali, and B. E. Swanson, Grinding wheel with combination of fused and sintered abrasive grits, 1988.

P. Navarrete, Adhésifs naturels à base de tanin, tanin/lignine, et tanin/gluten pour la fabrication de panneaux de bois, 2011.

P. Navarrete, A. Pizzi, H. Pasch, K. Rode, and L. Delmotte, Characterization of two maritime pine tanins as wood adhesives, Journal of Adhesion Science and Technology, vol.27, pp.22-23, 2013.

B. Ndazi, J. V. Tesha, S. Karlsson, and E. T. Bisanda, Production of rice husks composites with Acacia mimosa tannin-based resin, Journal of Materials Science, vol.4, issue.21, pp.21-6978, 2006.
DOI : 10.1007/s10853-006-0220-7

N. En, Panneaux de Particules et Panneaux de Fibres -Détermination du gonflement en épaisseur après immersion dans l'eau

N. En, Panneaux de particules et panneaux de fibres -Détermination de la résistance à la traction perpendiculaire

N. Environnement, Colles pour revêtements de sol, 2002.

A. Nicollin, R. Kueny, L. Toniazzoa, and A. Pizzi, High density biocomposite from natural fibers and tannin resin, Journal of Adhesion Science and Technology, vol.26, pp.10-11, 2012.

. Norton, Abrasifs appliqués et agglomérés, 2015.

M. H. Novak, Valorisations non alimentaires des céréales, Faculté universitaire des Sciences agronomiques de, 2004.

M. T. Oliva-teles, C. Delerue-matos, and M. C. Alvim-ferraz, Determination of free furfuryl alcohol in foundry resins by chromatographic techniques, Analytica Chimica Acta, vol.537, issue.1-2, pp.1-2, 2005.
DOI : 10.1016/j.aca.2005.01.001

Z. Osman and A. Pizzi, Comparison of gelling reaction effectiveness of procyanidin tanins for wood adhesives Holz Als Roh-Und Werkstoff, pp.5-328, 2002.

J. Otis, Adhesive, 1923.

E. Papadopoulou, P. Nakos, S. Tsiantzi, and E. Athanassiadou, The challenge of bio-adhesives for the wood composite industries, 9th Pacific Rim Bio-based Composites Symposium, 2008.

H. Pasch, A. Pizzi, and K. Rode, MALDI???TOF mass spectrometry of polyflavonoid tannins, Polymer, vol.42, issue.18, pp.7531-7539, 2001.
DOI : 10.1016/S0032-3861(01)00216-6

M. Pervaiz and M. Sain, Protein extraction from secondary sludge of paper mill wastewater and its utilization as a wood adhesive, BioResources, vol.6, pp.2-961, 2011.

P. Jr, A. , I. M. Mancilha, and S. Sato, Acid hydrolysis of hemicellulose from bagasse, Brazilian Journal of Chemical Engineering, vol.14, p.3, 1997.

A. Pizzi, Chemistry and technology of cold and thermosetting wattle tannin based wood adhesives, 1977.

A. Pizzi, Tannin-formaldehyde exterior wood adhesives through flavonoid B-ring cross linking, Journal of Applied Polymer Science, vol.22, issue.8, pp.2397-2399, 1978.
DOI : 10.1002/app.1978.070220831

URL : http://onlinelibrary.wiley.com/doi/10.1002/app.1978.070220831/pdf

A. Pizzi and D. G. Roux, Resorcinol/wattle flavonoids condensates for cold-setting adhesives, Journal of Applied Polymer Science, vol.22, issue.9, pp.9-2717, 1978.
DOI : 10.1002/app.1978.070220929

A. Pizzi and D. G. Roux, The chemistry and development of tannin-based weather-and boilproof cold-setting and fast-setting adhesives for wood, Journal of Applied Polymer Science, vol.22, pp.7-1945, 1978.

A. Pizzi and H. O. Scharfetter, The chemistry and development of tannin-based adhesives for exterior plywood, Journal of Applied Polymer Science, vol.22, issue.6, pp.6-1745, 1978.
DOI : 10.1002/app.1978.070220623

A. Pizzi, The chemistry and development of tannin/urea???formaldehyde condensates for exterior wood adhesives, Journal of Applied Polymer Science, vol.23, issue.9, pp.2777-2792, 1979.
DOI : 10.1002/app.1979.070230922

A. Pizzi, Tannin-Based Adhesives, Journal of Macromolecular Science, Part C, vol.28, issue.7, pp.247-315, 1980.
DOI : 10.1002/app.1979.070230631

URL : https://hal.archives-ouvertes.fr/hal-01599534

A. Pizzi and G. M. Daling, Laminating wood adhesives by generation of resorcinol from tannin extracts, Journal of Applied Polymer Science, vol.25, issue.6, pp.6-1039, 1980.
DOI : 10.1002/app.1980.070250606

A. Pizzi and F. A. Cameron, Reduzierung von Pre??temperatur und Klebstoffmenge durch Metallionen-Katalysatoren bei der Herstellung Tanningebundener Spanplatten, Holz als Roh- und Werkstoff, vol.24, issue.12, pp.11-463, 1981.
DOI : 10.1007/BF02606463

A. Pizzi, H. O. Scharfetter, and E. W. Kes, Bindemittel und Verfahrenstechniken er??ffnen neue M??glichkeiten f??r die Holzindustrie, Holz als Roh- und Werkstoff, vol.3, issue.7, 1981.
DOI : 10.1080/00222358008081043

A. Pizzi, Tannin-based adhesives (Chapter 4), Wood Adhesives Chemistry and Technology. M. Dekker, 1983.
DOI : 10.1080/00222358008081043

A. Pizzi, F. A. Cameron, T. M. Goulding, E. Kes, and P. K. Westhuizen, ???Honeymoon??? schnellabbindende Kleber f??r die Schichtholz-Verleimung, Holz als Roh- und Werkstoff, vol.32, issue.2, pp.2-61, 1983.
DOI : 10.1007/BF02612234

A. Pizzi, E. Orovan, and F. A. Cameron, Kalth??rtender Tannin-Resorzin-Formaldehyd-Leim mit geringem Resorzingehalt, Holz als Roh- und Werkstoff, vol.22, issue.2, pp.2-67, 1988.
DOI : 10.1080/00222358008081043

A. Pizzi and A. Stephanou, On the chemistry, behavior, and cure acceleration of phenol???formaldehyde resins under very alkaline conditions, Journal of Applied Polymer Science, vol.49, issue.12, pp.12-2157, 1993.
DOI : 10.1002/app.1993.070491212

A. Pizzi, Advanced wood adhesives technology, 1994.

A. Pizzi and A. Stephanou, A 13C NMR study of polyflavonoid tannin adhesive intermediates. I. Noncolloidal performance determining rearrangements, Journal of Applied Polymer Science, vol.51, issue.13, pp.13-2109, 1994.
DOI : 10.1002/app.1994.070511302

A. Pizzi and A. Stephanou, A 13C NMR study of polyflavonoid tannin adhesive intermediates. II. Colloidal state reactions, Journal of Applied Polymer Science, vol.51, issue.13, pp.13-2125, 1994.
DOI : 10.1002/app.1994.070511303

A. Pizzi and N. Meikleham, Induced accelerated autocondensation of polyflavonoid tanins for phenolic polycondensates. III. CP-MAS 13C-NMR of different tanins and models, Journal of Applied Polymer Science, vol.55, pp.8-1265, 1995.

A. Pizzi, N. Meikleham, and A. Stephanou, Induced accelerated autocondensation of polyflavonoid tanins for phenolic polycondensates. II. Cellulose effect and application, Journal of Applied Polymer Science, vol.55, pp.6-929, 1995.

A. Pizzi, N. Meikleham, B. Dombo, and W. , Tanninkleber f??r Spanplatten, hergestellt durch Autokondensation und ohne Emission von Schadstoffen, Holz als Roh- und Werkstoff, vol.51, issue.2, pp.1-201, 1995.
DOI : 10.1007/BF02716424

A. Pizzi and A. Baecker, A New Boron Fixation Mechanism for Environment Friendly Wood Preservatives, Holzforschung, vol.52, issue.5, pp.507-510, 1996.
DOI : 10.1002/app.1995.070550611

A. Pizzi, Phenolic Resin Adhesives, Handbook of Adhesive Technology. M. Dekker, pp.541-571, 2003.
DOI : 10.1201/9780203912225.ch26

URL : https://hal.archives-ouvertes.fr/hal-01593762

A. Pizzi, Urea???Formaldehyde Adhesives, In Handbook of Adhesive Technology. M, 2003.
DOI : 10.1201/9780203912225.ch31

URL : https://hal.archives-ouvertes.fr/hal-01593358

A. Pizzi, Melamine???Formaldehyde Adhesives, In Handbook of Adhesive Technology. M, 2003.
DOI : 10.1201/9780203912225.ch32

URL : https://hal.archives-ouvertes.fr/hal-01593358

A. Pizzi, Natural Phenolic Adhesives I, Handbook of Adhesive Technology, 2003.
DOI : 10.1201/9780203912225.ch27

A. Pizzi, C. Simon, B. George, D. Perrin, and M. C. Triboulot, Tannin antioxidant characteristics in leather versus leather light stability: Models, Journal of Applied Polymer Science, vol.64, issue.2, pp.2-1030, 2004.
DOI : 10.1002/(SICI)1097-4628(19970411)64:2<243::AID-APP5>3.0.CO;2-R

A. Pizzi, Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues, Journal of Adhesion Science and Technology, vol.19, issue.1, pp.8-829, 2006.
DOI : 10.1163/156856105774429037

A. Pizzi, Polyflavonoid tanins self-condensation adhesives for wood particleboard, The Journal of Adhesion, vol.85, pp.2-3, 2009.

A. Pizzi, H. Pasch, K. Rode, and S. Giovando, Polymer structure of commercial hydrolyzable tanins by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry, Journal of Applied Polymer Science, vol.113, pp.6-3847, 2009.

. Ragoubi, High resin content natural matrix?natural fibre biocomposites, Industrial Crops and Products, vol.30, issue.2, pp.235-240, 2009.

K. F. Plomley, Tannin-formaldehyde adhesives for wood. II, Wattle tannin adhesives Commonwealth Scientific and Industrial Research Organization, 1966.

L. J. Porter, H. Chapman, . London, and J. B. Harborne, The flavonoids, 1988.

. Prioriterre, Choisir Ses Colles, 2010.

N. Radebe, K. Rode, A. Pizzi, S. Giovando, and H. Pasch, MALDI-TOF-CID for the microstructure elucidation of polymeric hydrolysable tanins, Journal of Applied Polymer Science, vol.128, pp.1-97, 2013.

S. Radivojevic and P. A. Cooper, The effects of wood species and treatment retention on kinetics of CCA-C fixation reactions, Wood Science and Technology, vol.5, issue.6, pp.2-269, 2010.
DOI : 10.1007/s00226-009-0277-y

. Mautz, Role of tanins in defending plants against ruminants: Reduction in protein availability, Ecology, vol.68, pp.1-98, 1987.

D. Rossouw and T. Du, Reaction kinetics of phenols and tannin with aldehydes, 1979.

D. Rossouw, T. Du, A. Pizzi, and G. Mcgillivray, The kinetics of condensation of phenolic polyflavonoid tanins with aldehydes, Journal of Polymer Science: Polymer Chemistry Edition, vol.18, pp.12-3323, 1980.

D. G. Roux, Recent advances in the chemistry and chemical utilization of the natural condensed tannins, Phytochemistry, vol.11, issue.4, pp.1219-1230, 1972.
DOI : 10.1016/S0031-9422(00)90068-2

D. G. Roux, D. Ferreira, H. K. Hundt, and E. Malan, Structure stereochemistry and reactivity of natural condensed tanins as basis for their extended industrial application, Applied Polymer Symposium, vol.28, pp.335-353, 1975.

D. G. Roux, D. Ferreira, J. J. Botha, and D. C. Garbutt, Heartwood extracts of the black wattle (Acacia Mearnsii) as a possible source of resorcinol, Applied Polymer Symposium, vol.28, pp.1365-1376, 1976.

C. V. Rue, Vitrified bonded grinding wheels containing sintered gel aluminous abrasive grits, 1985.

J. Sanchez-martín, M. Gonzalez-velasco, and J. Beltran-heredia, Acacia Mearnsii de Wild tannin-based flocculant in surface water treatment, Journal of Wood Chemistry and Technology, vol.29, pp.2-119, 2009.

J. Sanchez-martín, J. Beltran-heredia, and P. Gibello-pérez, Adsorbent biopolymers from tannin extracts for water treatment, Chemical Engineering Journal, vol.168, issue.3, pp.3-1241, 2011.
DOI : 10.1016/j.cej.2011.02.022

. Alonso, Adsorbent tannin foams: New and complementary applications in wastewater treatment, Chemical Engineering Journal, vol.228, pp.575-582

. Alonso, Optimization of tannin rigid foam as adsorbents for wastewater treatment, Industrial Crops and Products, vol.49, pp.507-514

A. Sauget, A. Nicollin, and A. Pizzi, Fabrication and mechanical analysis of mimosa tannin and commercial flax fibers biocomposites, Journal of Adhesion Science and Technology, vol.124, issue.20, pp.2204-2218, 2013.
DOI : 10.1021/ja026309v

URL : https://hal.archives-ouvertes.fr/hal-01593630

A. Sauget, X. Zhou, and A. Pizzi, MALDI-ToF Analysis of Tannin-Resorcinol Resins by Alternative Aldehydes, Journal of Renewable Materials, vol.27, issue.3, pp.3-186, 2014.
DOI : 10.1080/01694243.2013.787515

URL : https://hal.archives-ouvertes.fr/hal-01597480

A. Sauget, X. Zhou, and A. Pizzi, Tannin-Resorcinol-Formaldehyde Resin and Flax Fiber Biocomposites, Journal of Renewable Materials, vol.28, issue.3, pp.3-173, 2014.
DOI : 10.1016/j.indcrop.2012.07.020

URL : https://hal.archives-ouvertes.fr/hal-01597791

A. Scalbert, D. Cahill, D. Dirol, M. A. Navarrete, M. T. De-troya et al., A Tannin/Copper Preservation Treatment for Wood, Holzforschung, vol.6, issue.2, pp.2-133, 1998.
DOI : 10.1039/an9709500498

A. Scalbert, I. Ti-johnson, and M. Saltmarsh, Polyphenols: antioxidants and beyond, The American Journal of Clinical Nutrition, vol.81, issue.235, 2005.
DOI : 10.1359/jbmr.2002.17.10.1904

T. P. Schultz, W. B. Harms, T. H. Fisher, K. D. Mcmurtrey, J. Minn et al., Durability of Angiosperm Heartwood: The Importance of Extractives, Holzforschung, vol.29, issue.1, pp.1-29, 1995.
DOI : 10.1016/S0031-9422(00)86247-0

T. P. Schultz and D. D. Nicholas, Naturally durable heartwood: evidence for a proposed dual defensive function of the extractives, Phytochemistry, vol.54, issue.1, pp.1-47, 2000.
DOI : 10.1016/S0031-9422(99)00622-6

T. P. Schultz and D. D. Nicholas, Development of environmentally-benign wood preservatives based on the combination of organic biocides with antioxidants and metal chelators, Phytochemistry, vol.61, issue.5, pp.5-555, 2002.
DOI : 10.1016/S0031-9422(02)00267-4

. Delmotte, Phenolic resin wood panel adhesives based on chestnut hydrolysable tanins, International Wood Products Journal, vol.4, issue.2, pp.95-100

. Delmotte, Phenolic resin adhesives based on chestnut hydrolysable tanins, Journal of Adhesion Science and Technology, vol.27, pp.18-19

R. D. Sproull, P. R. Bienkowski, and G. T. Tsao, Production of furfural from corn stover hemicellulose, Biotechnology and Bioengineering Symposium, vol.15, pp.561-577, 1986.

X. Sun, Overview of Plant Polymers, Bio- Based Polymers and Composites, pp.1-14, 2005.
DOI : 10.1016/B978-1-4557-2834-3.00001-X

A. Szczurek, V. Fierro, A. Pizzi, and A. Celzard, Mayonnaise, whipped cream and meringue, a new carbon cuisine, Carbon, vol.58, pp.245-248, 2013.
DOI : 10.1016/j.carbon.2013.02.056

URL : https://hal.archives-ouvertes.fr/hal-01296304

A. Szczurek, V. Fierro, A. Pizzi, M. Stauber, and A. Celzard, Carbon meringues derived from flavonoid tannins, Carbon, vol.65, pp.214-227, 2013.
DOI : 10.1016/j.carbon.2013.08.017

URL : https://hal.archives-ouvertes.fr/hal-01295737

A. Szczurek, V. Fierro, A. Pizzi, M. Stauber, and A. Celzard, A new method for preparing tannin-based foams, Industrial Crops and Products, vol.54, pp.40-53, 2014.
DOI : 10.1016/j.indcrop.2014.01.012

URL : https://hal.archives-ouvertes.fr/hal-01295578

T. Tabarsa, S. Jahanshahi, and A. Ashori, Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol???formaldehyde adhesive, Composites Part B: Engineering, vol.42, issue.2, pp.2-176, 2011.
DOI : 10.1016/j.compositesb.2010.09.012

M. Thébault, A. Pizzi, S. Dumarçay, P. Gerardin, E. Fredon et al., Polyurethanes from hydrolysable tannins obtained without using isocyanates, Industrial Crops and Products, vol.59, pp.329-336, 2014.
DOI : 10.1016/j.indcrop.2014.05.036

M. F. Thevenon, A. Pizzi, and J. P. Haluk, Protein borates as non-toxic, long-term, widespectrum , ground-contact wood preservatives, Holzforschung, vol.52, pp.3-241, 1998.
DOI : 10.1515/hfsg.1998.52.3.241

M. F. Thevenon, G. Tondi, and A. Pizzi, Hochwirksame Holzschutzmittel auf Tanninharz-Bor-Basis f??r Anwendungen im Au??enbereich, European Journal of Wood and Wood Products, vol.72, issue.8, pp.1-89, 2009.
DOI : 10.1093/jee/87.6.1547

M. F. Thevenon, G. Tondi, and A. Pizzi, Environmentally friendly wood preservative system based on polymerized tannin resin-boric acid for outdoor applications, Maderas. Ciencia Y Tecnología, vol.12, pp.3-253, 2010.

G. Tondi, A. Pizzi, and R. Olives, NATURAL TANNIN-BASED RIGID FOAMS AS INSULATION FOR DOORS AND WALL PANELS, Maderas -Ciencia y tecnologia, pp.3-219, 2008.
DOI : 10.4067/S0718-221X2008000300005

G. Tondi, Développement de résines de polycondensation à base de tanins pour produits industriels écologiques et innovants -Mousses rigides et produits de préservation bois, 2009.

G. Tondi and A. Pizzi, Tannin-based rigid foams: Characterization and modification, Industrial Crops and Products, vol.29, issue.2-3, pp.2-3, 2009.
DOI : 10.1016/j.indcrop.2008.07.003

G. Tondi, C. W. Oo, A. Pizzi, A. Trosa, and M. F. Thevenon, Metal adsorption of tannin based rigid foams, Industrial Crops and Products, vol.29, issue.2-3, pp.2-3, 2009.
DOI : 10.1016/j.indcrop.2008.06.006

G. Tondi, W. Zhao, A. Pizzi, G. Du, V. Fierro et al., Tannin-based rigid foams: A survey of chemical and physical properties, Bioresource Technology, vol.100, issue.21, pp.21-5162, 2009.
DOI : 10.1016/j.biortech.2009.05.055

G. Tondi, S. Wieland, T. Wimmer, M. F. Thevenon, A. Pizzi et al., Tanninboron preservatives for wood buildings: mechanical and fire properties, European Journal of Wood and Wood Products, vol.70, pp.5-689, 2012.

A. Trosa and A. Pizzi, A no-aldehyde emission hardener for tannin-based wood adhesives for exterior panels, Holz als Roh- und Werkstoff, vol.59, issue.4, pp.4-266, 2001.
DOI : 10.1007/s001070100200

G. Vazquez, G. Antorrena, J. L. Francisco, and J. Gonzalez, Eigenschaften von Phenol-Tannin-Harzen aus Rindenextrakten von Pinus pinaster als Kleber f??r Eucalyptus-Sperrholz, Holz als Roh- und Werkstoff, vol.43, issue.1, 1992.
DOI : 10.1007/BF02650319

G. Vazquez, G. Antorrena, J. L. Francisco, M. C. Arias, and J. Gonzalez, Phenolharze f??r die Sperrholzverleimung, hergestellt aus Rindenextrakten von Pinus pinaster, Holz als Roh- und Werkstoff, vol.50, issue.3, pp.3-221, 1993.
DOI : 10.1007/BF02628284

G. Vazquez, J. Gonzalez-alvarez, F. Lopez-suevos, and G. Antorrena, Rheology of tanninadded phenol formaldehyde adhesives for plywood, pp.2-88, 2002.

M. Vidal, E. Vergara, M. Nunez, A. Ballerini, and E. Ramírez, Evaluation of lupin flour (LF)based adhesive for making sustainable wood materials, International Convention of Society of Wood Science and Technology and United Nations Economic Commission for Europe -Timber Committee, 2010.

V. Leyser, E. , and A. Pizzi, The formulation and commercialization of glulam pine tannin adhesives in chile Holz Als Roh-Und Werkstoff, pp.1-25, 1990.

J. Webster and M. Tricard, Innovations in Abrasive Products for Precision Grinding, CIRP Annals, vol.53, issue.2, pp.597-617, 2004.
DOI : 10.1016/S0007-8506(07)60031-6

H. Yamaguchi and K. Okuda, Chemically Modified Tannin and Tannin-Copper Complexes as Wood Preservatives, Holzforschung, vol.75, issue.6, pp.596-602, 1998.
DOI : 10.1016/0031-9422(91)83426-L

Y. Yazaki and P. J. Collins, Holzkleber auf der Grundlage von Tanninextrakten aus Rinden einiger Kiefern- und Fichtenarten, Holz als Roh- und Werkstoff, vol.34, issue.4, pp.5-307, 1994.
DOI : 10.1007/BF02621420

L. Zhao, B. Cao, F. Wang, and Y. Yazaki, Tannin aus Acacia mearnski als Kleber zur Herstellung von Spernholz f??r Au??enverwendung in China, Holz als Roh- und Werkstoff, vol.42, issue.6, pp.2-113, 1994.
DOI : 10.1007/BF02615476

X. Zhou, A. Pizzi, A. Sauget, A. Nicollin, X. Li et al., Lightweight tannin foam/composites sandwich panels and the coldset tannin adhesive to assemble them, Industrial Crops and Products, vol.43, pp.255-260, 2013.
DOI : 10.1016/j.indcrop.2012.07.020

URL : https://hal.archives-ouvertes.fr/hal-01296307

W. V. Zucker, Tanins: Does structure determine function? An ecological perspective, The American Naturalist, vol.121, pp.3-335, 1983.
DOI : 10.1086/284065