B. References-1, R. Mesquita, D. Axmann, and J. Geis-gerstorfer, Dynamic visco-elastic properties of dental composite resins, Dent Mater, vol.22, pp.258-67, 2006.

I. Sideriou, M. Karabela, and E. Vouvoudi, Dynamic thermomechanical properties and sorption characteristics of two commercial light cured dental resin composites, Dental Materials, vol.24, issue.6, pp.737-780, 2008.
DOI : 10.1016/j.dental.2007.08.004

R. Mesquita and J. Geis-gerstorfer, Influence of temperature on the visco-elastic properties of direct and indirect dental composite resins, Dental Materials, vol.24, issue.5, pp.623-655, 2008.
DOI : 10.1016/j.dental.2007.06.025

K. Saber-sheik, R. Clarke, and M. Braden, Viscoelastic properties of some soft lining materials I???effect of temperature, Biomaterials, vol.20, issue.9, pp.817-839, 1999.
DOI : 10.1016/S0142-9612(98)00236-1

N. Emami and K. Söderholm, Dynamic mechanical thermal analysis of two light-cured dental composites, Dental Materials, vol.21, issue.10, pp.977-83, 2005.
DOI : 10.1016/j.dental.2005.02.016

M. Braem, V. Van-doren, P. Lambrechts, and G. Vanherle, Determination of Young's modulus of dental composites: A phenomenological model, Journal of Materials Science, vol.15, issue.6, pp.2037-2079, 1987.
DOI : 10.1007/BF01132936

J. Sabbagh, J. Vreven, and G. Leloup, Dynamic and static moduli of elasticity of resin-based materials, Dental Materials, vol.18, issue.1, pp.64-71, 2002.
DOI : 10.1016/S0109-5641(01)00021-5

J. Rees, P. Jacobsen, and J. Hickman, The elastic modulus of dentine determined by static and dynamic methods, Clinical Materials, vol.17, issue.1, pp.11-16, 1994.
DOI : 10.1016/0267-6605(94)90042-6

S. Beun, T. Glorieux, J. Devaux, J. Vreven, G. Leloup et al., Characterization of nanofilled compared to universal and microfilled composites Sideriou ID, Karabela MM. Characteristics of the sorption of water and an ethanol/ water solution by light-cured copolymers of 2-hydroxylethyl methacrylate with dental dimethacrylates A classification of dental composites according to their morphological and mechanical characteristics, Dent Mater. J. Appl. Polym. Sci. Dent Mater, vol.231098, issue.11, pp.51-92503, 1992.

Y. Abe, P. Lambrechts, S. Inoue, M. Braem, M. Takeuchi et al., Dynamic elastic modulus of ???packable??? composites, Dental Materials, vol.17, issue.6, pp.520-545, 2001.
DOI : 10.1016/S0109-5641(01)00012-4

E. Vouvoudi and I. Sideriou, Dynamic mechanical properties of dental nanofilled light-cured resin composites: Effect of food-simulating liquids, Journal of the Mechanical Behavior of Biomedical Materials, vol.10, pp.87-96, 2012.
DOI : 10.1016/j.jmbbm.2012.02.007

M. C. Prager, Using flowable composites in direct posterior restaurations, Dent. Today, vol.16, pp.62-69, 1997.

R. Labella, P. Lambrechts, B. Van-meerbeek, and G. Vanherle, Polymerization shrinkage and elasticity of flowable composites and filled adhesives, Dental Materials, vol.15, issue.2, pp.128-137, 1999.
DOI : 10.1016/S0109-5641(99)00022-6

F. Papacchini, C. Goracci, F. T. Sadek, F. Monticelli, F. Garcia-godoy et al., Microtensile bond strength to ground ename) by glass-ionomers, resinmodified glass-ionomers, and resin composites used as pit and fissure sealants, J. Dent, pp.33-459, 2005.

S. Corona, M. C. Borsatto, L. Garcia, R. P. Ramos, and R. G. Palma-dibb, Randomized, controlled trial comparing the retention of a flowable restorative system with a conventional resin sealant: one-year follow up, International Journal of Paediatric Dentistry, vol.32, issue.1, pp.15-44, 2005.
DOI : 10.14219/jada.archive.1981.0051

V. Pardi, M. A. Sinhoreti, A. C. Pereira, and G. M. , Ambrosano and M. Meneghim, ln vitro evaluation of microleakage of different materials used as pit-and-fissure sealants, J . Braz. Dent, pp.17-49, 2006.

A. J. Feilzer, A. 1. Kakaboura, A. J. De-gee, and C. L. Davidson, The influence on the development of setting shrinkage stress in traditional and resin-modified glassionomer cements, Dent. Mater, pp.11-186, 1995.

H. Oysaed and 1. E. Ruyter, Composites for use in posterior teeth: Mechanical properties tested under dry and wet conditions, Journal of Biomedical Materials Research, vol.2, issue.2, pp.261-271, 1986.
DOI : 10.1038/sj.bdj.4805244

J. L. Ferracane, Elution of leachable components from composites, Journal of Oral Rehabilitation, vol.71, issue.4, pp.441-452, 1994.
DOI : 10.1177/00220345820610081501

M. A. Cattani-lorente, V. Dupuis, J. Payan, F. Moya, and J. M. Meyer, Effect of water on the physical properties of resin-modified glass ionomer cements, Dental Materials, vol.15, issue.1, pp.15-71, 1999.
DOI : 10.1016/S0109-5641(99)00016-0

U. Ôrtengren, U. Elgh, V. Spasenoska, P. Milleding, J. Haasum et al., Water sorption and flexural properties of a composite resin cement, Int. J . Prosthodont, vol.13, pp.141-147, 2000.

K. Tanaka, M. Taira, H. Shintani, and M. Wasaka, Residual monomers (TEGDMA and Bis-GMA) of a set visible-light-cured dental composite resin when immersed in water, Journal of Oral Rehabilitation, vol.67, issue.4, p.53, 1991.
DOI : 10.1177/00220345880670010401

K. J. Sôderholm, Filler leachability during water storage of six composite materials, Scand, J. Dent. Res, pp.98-82, 1990.

M. A. Rathburn, R. G. Craig, C. T. Hanks, and F. E. Filisko, Cytotoxicity of a bis- GMA dental composite before and after leaching in organic solvents, J . Biomed. Mater. Res, pp.25-443, 1991.

H. Oysaed, Ruyter and 1. J. Sjovik Kleven, Release of formaldehyde from dental composites, J . Dent. Res, vol.10, pp.1289-1294, 1988.

E. C. Munksgaard and M. Freund, Enzymatic hydrolysis of (di)methacrylates and their polymers, Scand, J. Dent. Res, pp.98-201, 1990.

K. Moharamzadeh, R. Van-noort, 1. M. Brook, and A. M. Scutt, Cytotoxicity of resin monomers on human gingival fibroblasts and HaCaT keratinocytes, Dental Materials, vol.23, issue.1, pp.40-44, 2007.
DOI : 10.1016/j.dental.2005.11.039

M. M. Dougall, J. Selden, J. R. Nydegger, and D. L. , Carnes, lmmortalized mouse odontoblast cellline M06-G3 application for in vitro biocompatibility testing, Am. J. Dent, vol.11, p.16, 1997.

H. Darmani and A. S. , The effects of BIS-GMA and TEG-DMA on female mouse fertility, Dental Materials, vol.22, issue.4, pp.353-358, 2006.
DOI : 10.1016/j.dental.2005.04.029

J. T. Samuelsen, J. A. Holme, R. Becher, S. Karlsson, E. Morisbak et al., HEMA reduces cell proliferation and induces apoptosis in vitro, Dental Materials, vol.24, issue.1, pp.134-140, 2008.
DOI : 10.1016/j.dental.2007.08.006

A. Knezevic, D. Zeljezic, N. Kopjar, and . Tarle, Cytotoxicity of Composite Materials Polymerized with LED Curing Units, Operative Dentistry, vol.33, issue.1, pp.23-30, 2003.
DOI : 10.2341/07-16

C. Hanse, !. , G. Leyhausen, U. E. Mai, and W. Geurtsen, Effects of various resin composite (co)monomers and extracts on two caries-associated micro-organisms in vitro, Dent. Mater, pp.77-60, 1998.

Y. Tamai, H. Tanaka, and K. Nakanishi, Molecular Simulation of Permeation of Small Penetrants through Membranes. 2. Solubilities, Macromolecules, vol.28, issue.7, pp.2544-2554, 1995.
DOI : 10.1021/ma00111a058

V. Bellenger, J. Verdu, and E. Morel, Structure-properties relationship for densely cross-linked epoxy-amine systems based on epoxide or amine mixtures

). S. Venz and B. Dickens, NIR-spectroscopic investigation of water sorption characteristics of dental resins and composites, Journal of Biomedical Materials Research, vol.5, issue.10, pp.1231-1248, 1991.
DOI : 10.1177/00220345810600110701

]. N. Marcovich, M. M. Reboredo, and M. I. Aranguren, Moisture diffusion in polyester???woodflour composites, Polymer, vol.40, issue.26, pp.7313-7320, 1999.
DOI : 10.1016/S0032-3861(99)00093-2

). R. Kerby, L. Knobloch, S. Schricker, and B. Gregg, Synthesis and evaluation of modified urethane dimethacrylate resins with reduced water sorption and solubility, Dental Materials, vol.25, issue.3, pp.25-302, 2009.
DOI : 10.1016/j.dental.2008.07.009

S. Rüttermann, I. Dluzhevskaya, C. Grosssteinbeck, W. H. Raab, and R. Janda, Impact of replacing Bis-GMA and TEGDMA by other commercially avaible monomers on the properties of resin-based composites, Dent. Mater, pp.26-353, 2010.

M. Braden and K. W. Davy, Water absorption characteristics of some unfilled resins, Biomaterials, vol.7, issue.6, pp.474-475, 1986.
DOI : 10.1016/0142-9612(86)90039-6

V. Sideriou, G. Tserki, and . Papatanassiou, Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins, Biomaterials, vol.24, issue.4, pp.655-665, 2003.
DOI : 10.1016/S0142-9612(02)00380-0

S. Kalachandra and D. T. Turner, Water sorption of polymethacrylate networks: Bis-GMA/TEGDM copolymers, Journal of Biomedical Materials Research, vol.4, issue.3, pp.329-338, 1987.
DOI : 10.3109/00016358109162272

A. Yap and C. M. Lee, Water sorption and solubility of resin-modified polyalkenoate cements, Journal of Oral Rehabilitation, vol.30, issue.4, pp.310-314, 1997.
DOI : 10.1177/00220345850640121501

A. Akashi, Y. Matsuya, M. Unemori, and A. Akamine, The relationship between water absorption characteristics and the mechanical strength of resin-modified glass-ionomer cements in long-term water storage, Biomaterials, vol.20, issue.17, pp.1573-1578, 1999.
DOI : 10.1016/S0142-9612(99)00057-5

M. Braden and G. J. Pearson, Analysis of aqueous extract from filled resins, Journal of Dentistry, vol.9, issue.2, pp.141-143, 1981.
DOI : 10.1016/0300-5712(81)90088-9

]. K. Inoue and I. Hayashi, Residual monomer (Bis-GMA) of composite resins, Journal of Oral Rehabilitation, vol.20, issue.6, pp.493-541, 1982.
DOI : 10.1038/sj.bdj.4803760

]. K. Tanaka, M. Taira, H. Shintan, K. Wasaka, and M. , Residual monomers (TEGDMA and Bis-GMA) of a set visible-light-cured dental composite resin when immersed in water, Journal of Oral Rehabilitation, vol.67, issue.4, p.53, 1991.
DOI : 10.1177/00220345880670010401

W. Geurtsen, Substances released from dental resin composites and glass ionomer cements, European Journal of Oral Sciences, vol.106, issue.2p2, pp.687-695, 1998.
DOI : 10.1046/j.0909-8836.1998.eos10602ii04.x

V. M. , P. C. Moon, and B. J. Love, Extractable Cree monomers from selfcured dental sealants resulting from dispendùtg errors, J . Biomed. Mater. Res

U. Ôrtengren, H. Wellendorf, S. Karlsson, and 1. E. Ruyter, Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment, Journal of Oral Rehabilitation, vol.28, issue.12, pp.1106-1115, 2001.
DOI : 10.1046/j.1365-2842.2001.00802.x

U. Gedde, Polymer-Physics, pp.55-75, 1995.
DOI : 10.1007/978-94-011-0543-9

J. L. Ferracane, Hygroscopic and hydrolytic effects in dental polymer networks, Dental Materials, vol.22, issue.3, pp.211-222, 2006.
DOI : 10.1016/j.dental.2005.05.005

S. Kalachandra, Influence of fillers on the water sorption of composites, Dental Materials, vol.5, issue.4, pp.283-288, 1989.
DOI : 10.1016/0109-5641(89)90077-8

]. C. Santos, R. L. Clarke, M. Braden, F. Guitian, and K. W. Davy, Water sorption characteristics of dental composites incorporating hydroxyapatite filler, Biomaterials, vol.23, issue.42, pp.1987-2004, 2002.

F. Monticelli, R. Osorio, M. Toledano, F. R. Tay, and M. Ferrari, In vitro hydrolytic degradation of composite quartz fiber-post bonds created by hydrophilic silane couplings, Oper. Dent, pp.31-728, 2006.

S. Beun, C. Bailly, J. Dabin, J. Vreven, G. Devaux et al., Rheological properties of experimental Bis-GMAITEGDMA flowable resin composites with various macro-filler/micro-filler ratio, Dent. Mater, pp.25-198, 2009.

]. S. Beun, C. Bailly, J. Devaux, and G. Leloup, Physical, mechanical and rheological characterization of resin-based pit and fissure sealants compared to flowable resin composites, Dental Materials, vol.28, issue.4, pp.349-359, 2012.
DOI : 10.1016/j.dental.2011.11.001

]. S. Beun, C. Bailly, J. Devaux, and G. Leloup, Rheological properties of flowable resin composites and pit and fissure sealants, Dental Materials, vol.24, issue.4, pp.548-555, 2008.
DOI : 10.1016/j.dental.2007.05.019

]. E. Mortier, D. Gerdolle, A. Dahoun, and M. M. Panighi, Influence of initial water content on the subsequent water sorption and solubility behaviour in restorative polymers, Am. J . Dent, vol.18, issue.48, pp.177-181, 2005.

]. U. Ôrtengren, F. Andersson, U. Elgh, B. Terselius, and S. Karlsson, Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials, Journal of Dentistry, vol.29, issue.1, pp.29-35, 2001.
DOI : 10.1016/S0300-5712(00)00055-5

I. S. , T. Dt, M. Y. , M. , and A. A. , Water sorption of polymethacrylate networks: bisGMA/ TEGDMA copolymers The relu:-. between water absc·:: charact eristics 2-;:: mechanical strengrr c: modi fied glass-oce ments in long-re~ storage, Biomed Mater Res, vol.21, pp.329-3385, 1987.

M. Simo, Y. , 0. A. , and G. Da, n: -"'- Curing Mode wirh a ..3 _ on Polymerizacion Co~ Ki net ics and De: e Conversion of Den~ - Based Materials, pp.149-155, 2009.

F. @bullet-_-36, T. K. , T. M. , $. Ml, -. Wasaka-k et al., monomers (TEGD~· --- GMA) of a set visible ;-dental composite ?esimmersed in wate· Re hab il, Porosity in compos re Biomatérials, vol.6, issue.8, p.53, 1991.

A. Vm and M. , Extractable fi-ee-from self-cured oen:a resulting fi-om disperc = J Biomed Mater =-es Bi omar 1 999, 40 GEODE U. Pol) re? ::- ppSS-75, p.5, 1995.

. Tab, Valeurs moyennes (écart·rype) du module de perte E" (GPa) en fonaion de la température ( 0 C) pour les échantillons testés après 1 semaine d'immersion dans de l'eau distillée (n?S) -Mean values (standard deviation) ofviscvus modulus f» (GPa) as a fimction of temperature ( 0 C) for one week water

P. Jacobsen, A. Y. Darr-ah, P. Lambrechts, !. S. Noue, M. et al., Sratic and 12 elastic modulus of 'packable' 17 KOLINIOUTOU·KUBIA E., jACOBSEN composites The effect of irradiation ti me 520-25. on the physical properties of lighr 13 MORAES j CS, SOSTENA MMDS., cu red resins, pp.265-73, 1990.

G. Cr, The glass transition 6: 21-6. temperature in dental composites Metal, of rhe srrucrure of silane coupling Ceramic and Polymerie Composites agent on sorption characreristics forVanous Uses. ln Tech. 2011. of solvenrs by dental resin·nano· 14 VOUVOUDI EC, SIOERIOU ID. composites. Dent Mater, 2008.