. Ademe, , 2014.

J. Manders, Life Cycle Assessment of the treatment of MSW in "the average" European Waste-toEnergy plant, ISWA 6 th BEACON Conference, 2009.

F. Lebel, Etude des phénomènes de corrosion à haute température en environnement type UVEDDéveloppement d'un pilote laboratoire et quantification des paramètres clés gouvernant les mécanismes, 2008.

F. Soutrel, Comportement de métaux purs (Fe, Ni, Cr et Al) et de leurs alliages dans des conditions simulant celles rencontrées en milieu incinérateur d'O.M, 1998.

P. C. Stock, Etude de revêtements métalliques pour la protection des surchauffeurs d'usines d'incinération de déchets urbains, 2000.

J. Y. Legoux and C. Ledouce, L'incinération des déchets ménagers, 1995.

R. T. Evans, Incinerating municipal and industrial waste, 1991.

J. M. Brossard, Corrosion des échangeurs de chaleur dans les unités de valorisation énergétique de déchets ménagers, Ecole d'été CNRS Corrosion haute température, 2010.

M. Bøjer, P. A. Jensen, F. Frandsen, K. Dam-johansen, O. H. Madsen et al., Release of Potentially Corrosive Constituents from the Grate of a Waste-to-Energy boiler, IT3'07, pp.1-17, 2007.

, Gestion des déchets ménagers et assimilés, Bilan départemental 2011, 2012.

, Guidelines on the Interpretation of the R1 Energy Efficiency Formula for Incineration Facilities Dedicated to the Processing of Municipal Solid Waste Acccording to Annex II of Directive 2008/98/EC on Waste, OJ L, vol.312, pp.1-33, 2008.

R. Plur, Experiences and Improvements to Minimise Fireside Corrosion and Flue Gas Side-Deposits on Heat Transfer Surfaces Made in Operating the G e meinsc hafts-MLill-Verbrennungsanl age Niederrhein GmbH. Incinerating Municipal and Industrial Waste: Fireside Problems and Prospects for Improvement

R. W. Bruyers, , pp.47-70, 1991.

G. Reumont and G. Moulin, Les phénomènes de corrosion dans les usines d'incinération d'ordures ménagères (UIOM), Conférence présentée à l'École d'Anglet, 2002.

P. Steinmetz and C. Rapin, Corrosion of Metallic Materials in Waste Incinerators, Materials Science Forum, vol.251, pp.505-518, 1997.

K. Weulersse-mouturat, Etude de la corrosion à chaud de tubes de surchauffeurs en incinérateurs d'ordures ménagères et en centrales à charbon, contribution à la prévision de la durée de vie, 2003.

W. R. Niessen and S. H. Chansley, Proceedings of the National Incinerator Conference, pp.1-4, 1970.

H. Belevi and M. Langmeier, Factors Determining the Element Behavior in Municipal Solid Waste Incinerators. 2. Laboratory Experiments, Environmental Science & Technlology, vol.34, pp.2507-2512, 2000.

R. W. Bryers, Fireside slagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels, Progress in energy and combustion science, vol.22, pp.29-120, 1996.

R. Norling and I. Olefjord, Erosion-corrosion of Fe-and Ni-based alloys at 550°C, Wear, vol.254, pp.173-184, 2003.

O. Otsuka, Y. Tsukaue, K. Nakagawa, Y. Kawahara, and K. Yukawa, A Corrosion Mechanism for the Fireside Wastage of Superheater Materials in Waste Incinerators, CORROSION, vol.97, 1997.

S. Arvelakis, F. J. Frandsen, and K. Dam-johansen, Determining the Melting Behaviour of Ashes from Incineration Plants via Thermal Analysis, Journal of thermal analysis and calorimetry, vol.72, pp.1005-1017, 2003.

S. Arvelakis and F. J. Frandsen, Study on Analysis and Characterization Methods for Ash Material from Incineration Plants, Fuel, vol.84, pp.1725-1738, 2005.

A. L. Plumley, W. R. Roczniak, and E. C. Lewis, Incinerating Municipal and Industrial Waste, pp.373-404, 1991.

L. Sørum, F. J. Frandsen, and J. E. Hustad, On the fate of heavy metals in municipal solid waste combustion Part I: devolatilisation of heavy metals on the grate, Fuel, vol.82, pp.2273-2283, 2003.

Y. Kawahara and M. Kira, Corrosion factors of waterwall tube and protection by field metal spraying in municipal refuse incineration plant, CORROSION, vol.95, 1995.

K. Nakagawa and T. Isozaki, Fireside corrosion in reducing waste incineration environments, CORROSION, vol.94, 1994.

P. L. Daniel, L. D. Paul, and J. Barna, Fire-side corrosion in refuse-fired boilers, Materials Performance in Waste Incineration Systems, vol.27, 1988.

H. J. Grabke, Fundamental mechanisms of the attack of chlorine, HCl and chlorides on steels and high temperature alloys in the temperature range 400 to 900°C, Incinerating Municipal and Industrial Waste, pp.161-177, 1991.

H. J. Grabke, Fundamental aspects of oxidation, sulfidation, chloridation and carburization in the gasifier environment, Materials at high temperatures, vol.11, pp.23-29, 1993.

D. Bramhoff, H. J. Grabke, and H. P. Schmidt, Effects of Hydrogen Chloride and of Nitrogen in the Oxidation of Fe-20Cr, The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys, pp.335-349, 1989.

M. Spiegel and H. J. Grabke, High Temperature Corrosion of Low and High Steels in Simulated Waste, Materials and Corrosion, vol.47, pp.179-189, 1996.

P. Viklund, High Temperature Corrosion During Waste Incineration, 2011.

N. Otsuka, Effects of Fuel Impurities on the Fireside Corrosion of Boiler Tubes in Advanced Power Generating systems-a Thermodynamic Calculation of Deposit Chemistry, Corrosion Science, vol.44, pp.265-283, 2002.

A. Ruh and M. Spiegel, Influence of Gas Phase Composition on the Kinetics of Chloride Melt Corrosion of Pure Iron, Materials and Corrosion, vol.57, pp.237-243, 2006.

K. Weulersse-mouturat, G. Moulin, P. Billard, and G. Pierotti, High Temperature Corrosion of Superheater Tubes in Waste Incinerators and Coal-fired Plants, Materials Science Forum, vol.461, pp.973-980, 2004.

N. Otsuka, Chemistry and Melting Characteristics of Fireside Deposits Taken from Boiler Tubes in Waste Incinerators, Corrosion Science, vol.53, pp.2269-2276, 2011.

H. J. Grabke, E. Reese, and M. Spiegel, The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits, Corrosion Science, vol.37, pp.1023-1043, 1995.

J. Reichelt, G. Pfrang-stotz, B. Bergfeldt, H. Seifert, and P. Knappc, Formation of Deposits on the Surfaces of Superheaters and Economisers of MSW Incinerator Plant, Waste Management, vol.33, pp.43-51, 2013.

H. Kassman, L. Bäfver, and L. E. Åmand, The importance of SO2 and SO3 for sulphation of gaseous KClan experimental investigation in a biomass fired CFB boiler, Combustion and Flame, vol.157, pp.1649-1657, 2010.

F. Soutrel, C. Rapin, and P. Steinmetz, Corrosion of Fe, Ni, Cr and their Alloys in Simulated Municipal Waste Incineration Conditions, CORROSION, vol.98, 1998.

S. ?roda, S. Tuurna, K. Penttilä, and L. Heikinheimo, High temperature oxidation behaviour of boiler steels under simulated combustion gases, Materials Science Forum, vol.461, pp.981-988, 2004.

D. O. Albina, Theory and experience on corrosion of waterwall and superheater tubes of Waste-ToEnergy facilities, 2005.

I. G. Wright and H. H. Krause, Assessment of factors affecting boiler tube lifetime in waste-fired steam generators: new opportunities for research and technology development, Amer Society of Mechanical, vol.38, 1996.

J. Klöwer, High Temperature Corrosion by Deposits of Alkali Salts, CORROSION, vol.96, 1996.

H. P. Nielsen, F. J. Frandsen, K. Dam-johansen, and L. L. Baxter, The implications of chlorine-associated corrosion on the operation of biomass-fired boilers, Progress in energy and combustion science, vol.26, pp.283-298, 2000.

M. Montgomery and O. H. Larsen, Characterization of Deposits and their Influence on Corrosion in Waste Incineration Plants in Denmark, CORROSION, 2001.

M. Spiegel, The Role of Molten Salts in the Corrosion of Metals in Waste Incineration Plants, vol.7, pp.253-268, 2003.

S. C. Srivastava, K. M. Godiwalla, and M. K. Banerjee, Review : Fuel Ash Corrosion of Boiler and Superheater Tubes, Journal of Materials Science, vol.32, pp.835-849, 1997.

H. H. Krause, P. L. Daniel, and J. D. Blue, Corrosion of Boiler Tube Alloys in Refuse Firing : Shredded vs Bulk Refuse, CORROSION, vol.93, 1993.

H. H. Krause, Effects of flue-gas temperature and composition on corrosion from refuse firing, CORROSION, vol.91, 1991.

R. Warnecke and . Vdi, Seminar, vol.430504, 2004.

J. M. Brossard and . French, Activity on high temperature corrosion in Water vapor, Influence of Water Vapor on High-Temperature Oxidation of Steels and Cast Iron, Materials Science Foundations ISSN, vol.76, pp.1422-3597, 2014.

G. Sorell, The role of chlorine in high temperature corrosion in waste-to-energy plants, Materials at High temperature, vol.14, pp.207-220, 1997.

G. Y. Lai, Waste-to-Energy Boilers and Waste Incinerators, High-temperature corrosion and materials Applications, pp.335-358, 2007.

H. H. Krause, Fireside Corrosion Problems in Refuse-fired Boilers, CORROSION, vol.93, 1993.

A. Zahs, M. Spiegel, and J. H. Grabke, Chloridation and Oxidation of Iron, Chromium, Nickel and their Alloys in Chloridizing and Oxydizing Atmospheres at 400-700°C, Corrosion Science, vol.42, pp.1093-1122, 2000.

A. Roine, Outokumpu HSC chemistry for windows: chemical reaction and equilibrium software with extensive thermochemical database. User's guide, 2002.

H. H. Krause, J. T. Stropki, G. Sorell, and . Nace-corrosion, Corrosion of Boilers Tube Alloys in Cofiring of Refuse Derived Fuel and Pulverized Coal, Materials Performance in Waste Incinerator Systems, 1992.

H. H. Krause, Effect of Flue-gas Temperature and Composition on Corrosion from Refuse Firing., Materials Performance in Waste Incinerator Systems, pp.3-4, 1992.

H. Matsuda, S. Ozawa, K. Naruse, K. Ito, Y. Kojima et al., Kinetics of HCl emission from inorganic chlorides in simulated municipal wastes incineration conditions, Chemical engineering science, vol.60, pp.545-552, 2005.

J. Pyykonen and J. Jokiniemi, Modelling Alkali Chloride Superheater Deposition and its Implications, Fuel Processing Technology, vol.80, pp.225-262, 2003.

R. A. Rapp, Hot Corrosion of Materials : a Fluxing Mechanism?, Corrosion Science, vol.44, pp.209-221, 2002.

R. A. Rapp and K. S. Goto, Hot Corrosion of Metals by Molten Salts, Molten Salts 1, NJ, vol.159, 1981.

N. Otsuka and R. A. Rapp, Hot Corrosion of Preoxidised Ni by Thin Fused Na2SO4, Journal of the electrochemical Society, vol.137, pp.355-367, 1990.

M. J. Mc-nallan and M. Takemura, Environmental Effects on Molten Chloride Accelerated Corrosion in Waste Incinerator Systems, CORROSION, vol.95, 1995.

R. A. Rapp, Hot Corrosion of Materials, Elliot Symposium Proccedings, pp.227-236, 1990.

R. A. Rapp, Hot Corrosion of Materials, High temperature Science, vol.27, pp.355-367, 1990.

R. A. Rapp and Y. S. Zhang, Hot Corrosion of Materials : Fundamental Studies, JOM, vol.46, pp.47-55, 1994.

K. L. Luthra, Mechanism of oxidation-sulfation reactions of coo in the presence of Na2So4, Metallurgical Transactions A, vol.13, p.1647, 1982.

K. L. Luthra, Low temperature hot corrosion of cobalt-base alloys: Part II. Reaction mechanism, Metallurgical Transactions A, vol.13, p.1853, 1982.

W. T. Reid, External Corrosion and Deposits-Boilers and Gaz Turbines, 1971.

N. Osuka and T. Kudo, Hot Corrosion of Commercial Tube Steel Materials in a Japanese Waste Incinerator Environment, High Temperature Corrosion of Advanced Materials and Protective Coating, Proceedings of the Workshop on High Temperature Corrosion, pp.250-211, 1990.

T. Ishitsuka and K. Nose, Stability of Protective Oxide Films in Waste Incineration EnvironmentSolubility Measurement of Oxides in Molten Chlorides, Corrosion Science, vol.44, pp.247-263, 2002.

W. Spiegel, Analyse des Rohgases und der Kesselablagerung zur Beurteilung der Ersatzbrennstoffqualität, K.J. Thomé-Kozmiensky und M. Beckmann (Hrsg) : Energie aus Abfall. Band, vol.1, pp.441-458, 2006.

J. Lehmusto, B. J. Skrifvars, P. Yrjas, and M. Hupa, High temperature oxidation of metallic chromium exposed to eight different metal chlorides, Corrosion Science, vol.53, pp.3315-3323, 2011.

J. Lehmusto, D. Lindberg, P. Yrjas, B. J. Skrifvars, and M. Hupa, Thermogravimetric Studies of High Temperature Reactions Between Potassium Salts and Chromium, Corrosion Science, vol.59, pp.55-62, 2012.

K. Segerdahl, J. Pettersson, J. E. Svensson, and L. G. Johansson, Is KCl (g) Corrosive at Temperatures Above its Dew Point? Influence of KCl (g) on Initial Stages of the High Temperature Corrosion of 11% Cr Steel at 600°C, Materials Science Forum, vol.461, pp.109-116, 2004.

Y. S. Li, M. Sanchez-pasten, and M. Spiegel, High temperature interaction of pure Cr with KCl, Materials Science Forum, vol.461, pp.1047-1054, 2004.
DOI : 10.4028/www.scientific.net/msf.461-464.1047

P. Andersson, M. Norell, and R. Gautheron, Influence of KCl deposit morphology on corrosion of austenitic alloys at 500°C, Materials Science Forum, vol.461, pp.1015-1022, 2004.

J. Lehmusto, P. Yrjas, B. J. Skrifvars, and M. Hupa, High temperature corrosion of superheater steels by KCl and K2CO3 under dry and wet conditions, Fuel Processing Technology, vol.104, pp.253-264, 2012.
DOI : 10.1016/j.fuproc.2012.05.020

R. Backman, M. Hupa, M. Hiltumen, and K. Peltola, Interaction of the Behavior of Lead and Zinc With Alkalis in Fluidized Bed Combustion or Gasification of Waste Derived Fuels, 18 th International Conference on Fluidized Bed Combustion, Conference Proceedings, 2005.

M. Spiegel, The Role of Molten Salts in the Corrosion of Metals in Waste Incineration Plants, vol.7, pp.253-268, 2003.

A. Ruh and M. Spiegel, Thermodynamic and kinetic consideration on corrosion of Fe, Ni and Cr beneath a molten KCl-ZnCl2 mixture, Corrosion Science, vol.48, pp.679-695, 2006.

M. Spiegel, Salt melt induced corrosion of metallic materials in waste incineration plants, Materials and Corrosion, vol.50, pp.1-13, 1999.

M. Sánchez-pastén and M. Spiegel, High temperature corrosion of metallic materials in simulated waste incineration environments at 300-600°C, Materials and Corrosion, vol.57, pp.192-195, 2006.

Y. S. Li, Y. Niu, and W. T. Wu, Accelerated corrosion of pure Fe, Ni, Cr and several Fe-based alloys induced by ZnCl2-KCl at 450 C in oxidizing environment, Materials Science and Engineering: A, vol.345, pp.64-71, 2003.

Y. S. Li and M. Spiegel, Models describing the degradation of FeAl and NiAl alloys induced by ZnCl2-KCl melt at 400-450°C, Corrosion Science, vol.46, 2004.
DOI : 10.1016/j.corsci.2003.10.019

T. J. Pan, C. L. Zeng, and Y. Niu, Corrosion of three commercial steels under ZnCl2-KCl deposits in a reducing atmosphere containing HCl and H2S at 400-500°C, Oxidation of metals, vol.67, pp.107-127, 2007.

W. M. Lu, T. J. Pan, K. Zhang, and Y. Niu, Accelerated corrosion of five commercial steels under a ZnCl2KCl deposit in a reducing environment typical of waste gasification at 673-773K, Corrosion Science, vol.50, 1900.

Y. S. Li, M. Al-omary, Y. Niu, and K. Zhang, The corrosion of various materials under chloride deposits at 623-723K in pure oxygen, High Temperature Materials and Processes, vol.21, pp.11-24, 2002.

F. J. Perez, J. Nieto, J. A. Trilleros, and M. P. Hierro, Hot corrosion monitoring of waste incineration corrosion processes using electrochemical techniques, Materials Science Forum, vol.522, pp.531-538, 2006.

E. Otero, A. Pardo, F. J. Perez, M. V. Utrilla, and T. Levi, Corrosion behavior of 12CrMoV steel in waste incineration environments: hot corrosion by molten chlorides, Oxidation of metals, vol.49, pp.467-484, 1998.

E. Otero, A. Pardo, M. C. Merino, M. V. Utrilla, M. D. López et al., Corrosion behavior of IN800 superalloy in waste-incineration environments: hot corrosion by molten chlorides, Oxidation of metals, vol.51, pp.507-525, 1999.

M. Spiegel, Influence of gas phase composition on the Hot Corrosion of steels and nickel-based alloys beneath a (Ca-Na-K)-sulfate mixture containing PbSO4 and ZnSO4, Materials and Corrosion, vol.51, pp.303-312, 2000.

M. Spiegel, Corrosion mechanisms and failure cases in waste incineration plants, Materials Science Forum, vol.369, pp.971-978, 2001.
DOI : 10.4028/www.scientific.net/msf.369-372.971

D. Bankiewicz, P. Yrjas, D. Lindberg, and M. Hupa, Determination of the corrosivity of Pb-containing salt mixtures, Corrosion Science, vol.66, pp.225-232, 2013.

K. Nakagawa and Y. Matsunaga, The effect of chemical composition of ash deposit on the corrosion of boiler tubes in waste incinerators, Materials Science Forum, vol.251, pp.535-542, 1997.

P. D. Miller, Corrosion studies in municipal incinerators, 1972.

Y. Kawahara and Y. Kaihara, Recent Trends in Corrosion-resistant Tube Materials and Improvements of Corrosion Environment in the WTE Plants, CORROSION, 2001.

, NF EN 10216-2, Tubes sans soudure en acier pour service sous pression-Conditions techniques de livraison, AFNOR, 2014.

H. J. Grabke, M. Spiegel, and A. Zahs, Role of Alloying Elements and Carbides in the Chlorine-Induced Corrosion of Steels and Alloys, Materials Research, vol.7, pp.89-95, 2004.

P. Viklund, A. Hjörnhede, P. Henderson, A. Stålenheim, and R. Pettersson, Corrosion of superheater materials in a waste-to-energy plant, Fuel processing technology, vol.105, pp.106-112, 2013.

J. Lehmusto, P. Yrjas, B. J. Skrifvars, and M. Hupa, Corrosion Behavior of Superheater Steels in the Presence of Potassium Salts under Conditions Relevant to Biomass Combustion, Proceedings, Les Embiez, 2012.

W. W. Luo, Z. D. Liu, Y. T. Wang, and R. J. Yang, High Temperature Corrosion Behaviors of the Superheater Materials, Procedia Engineering, vol.36, pp.212-216, 2012.

K. Persson, M. Broström, J. Carlsson, A. Nordin, and R. Backman, High temperature corrosion in a 65 MW waste to energy plant, Fuel processing technology, vol.88, pp.1178-1182, 2007.

J. Pettersson, N. Folkeson, L. G. Johansson, and J. E. Svensson, The effects of KCl, K2SO4 and K2CO3 on the high temperature corrosion of a 304-type austenitic stainless steel, Oxidation of metals, vol.76, pp.93-109, 2011.

B. A. Baker, G. D. Smith, and L. E. Shoemaker, Performance of Commercial Alloys in Simulated Waste Incineration Environments, CORROSION, vol.183, 2001.

Y. Kawahara, High Temperature Corrosion Mechanisms and Effect of alloying Elements for Materials Used in Waste Incineration Environment, Corrosion Science, vol.44, pp.223-245, 2002.

Y. Kawahara, Application of High Temperature Corrosion-Resistant Materials and Coatings Under Severe Corrosive Environment in Waste-to-Energy Boilers, Journal of Thermal Spray Technology, vol.16, pp.202-213, 2007.

R. A. Antunes and M. C. De-oliveira, Corrosion in biomass combustion : A materials selection analysis and its interaction with corrosion mechanisms and mitigation strategies, Corrosion Science, vol.76, pp.6-26, 2013.

C. Cuevas-arteaga, D. Verhelst, and A. Alfantazi, Performance of alloy 625 under combustion gas environments: a review, ECS Transactions, vol.28, pp.61-76, 2010.

S. H. Lee, N. J. Themelis, and M. J. Castaldi, High-temperature corrosion in waste-to-energy boilers, Journal of Thermal Spray Technology, vol.16, pp.104-110, 2007.

A. Phongphiphat, C. Ryu, Y. B. Yang, K. N. Finney, A. Leyland et al., Investigation into high-temperature corrosion in a large-scale municipal waste-to-energy plant, Corrosion Science, vol.52, pp.3861-3874, 2010.

M. Schütze, M. Malessa, V. Rohr, and T. Weber, Development of coatings for protection in specific high temperature environments, Surface and Coatings Technology, vol.201, pp.3872-3879, 2006.

T. S. Sidhu, S. Prakash, and R. D. Agrawal, Hot corrosion studies of HVOF NiCrBSi and Stellite-6 coatings on a Ni-based superalloy in an actual industrial environment of a coal fired boiler, Surface and Coatings Technology, vol.201, pp.1602-1612, 2006.

J. A. Hearley, C. Liu, J. A. Little, and A. J. Sturgeon, Corrosion of Ni-Al high velocity oxyfuel (HVOF) thermal spray coating by fly ash and synthetic biomass ash deposits, British corrosion journal, vol.36, pp.111-120, 2001.

H. Y. Al-fadhli, J. Stokes, M. S. Hashmi, and B. S. Yilbas, The erosion-corrosion behaviour of high velocity oxy-fuel (HVOF) thermally sprayed inconel-625 coatings on different metallic surfaces, Surface and Coatings Technology, pp.5782-5788, 2006.

M. Mohammadi, S. Javadpour, S. A. Jahromi, K. Shirvani, and A. Kobayashi, Characterization and hot corrosion performance of LVPS and HVOF-CoNiCrAlYSi coatings, Vacuum, vol.86, pp.1458-1464, 2012.
DOI : 10.1016/j.vacuum.2012.02.030

M. M. Verdian, K. Raeissi, and M. Salehi, Characterization and electrochemical properties of Ni(Si)/Ni5 Si2 multiphase coatings prepared by HVOF Spraying, Applied Surface Science, vol.261, pp.493-498, 2012.
DOI : 10.1016/j.apsusc.2012.08.043

H. Herman, S. Sampath, and R. Mccune, Thermal spray: current status and future trends, Material Research Society Bulletin, vol.25, pp.17-25, 2000.
DOI : 10.1557/mrs2000.119

J. Kalivodova, D. Baxter, M. Schütze, and V. Rohr, Gaseous corrosion of alloys and novel coatings in simulated environments for coal, waste and biomass boilers, Materials and Corrosion, vol.56, pp.882-889, 2005.

A. Bradshaw, N. J. Simms, and J. R. Nicholls, Development of hot corrosion resistant coatings for gas turbines burning biomass and waste derived fuel gases, Surface and Coatings Technology, vol.216, pp.8-22, 2013.

P. Panjan, M. ?ekada, M. Panjan, and D. Kek-merl, Growth defects in PVD hard coatings, Vacuum, vol.84, pp.209-214, 2009.
DOI : 10.1016/j.vacuum.2009.05.018

F. Goutier, S. Valette, A. Vardelle, and P. Lefort, Behaviour of alumina-coated 304L steel in a Waste-toEnergy plant, Surface and Coatings Technology, vol.205, pp.4425-4432, 2011.

T. Sudiro, T. Sano, S. Kyo, O. Ishibashi, M. Nakamori et al., A Comparative Study of High Temperature Corrosion of Al2O3, SiO2 and Al2O3-SiO2 Forming Alloys in a Na2SO4-NaCl Atmosphere, Oxidation of metals, vol.80, pp.589-597, 2013.

F. Haider, S. Horn, S. Maisch, B. Waldmann, R. Warnecke et al., Online Corrosion Monitoring in Waste and Biomass Incineration Plants, 2009.

G. D. Smith, D. J. Tillack, and S. J. Patel, Alloy 625: impressive past, significant presence, awesome future, Superalloys, vol.718, pp.625-706, 1991.
DOI : 10.7449/2001/superalloys_2001_35_46

URL : https://doi.org/10.7449/2001/superalloys_2001_35_46

M. Montgomery, A. N. Hansson, S. A. Jensen, T. Vilhelmsen, and N. H. Nielsen, In situ corrosion testing of various nickel alloys at Måbjerg waste incineration plant, Materials and Corrosion, vol.64, pp.14-25, 2013.
DOI : 10.1002/maco.201006019

. Iso/dis, AFNOR, 2014.

J. Pettersson, C. Pettersson, N. Folkeson, L. G. Johansson, E. Skog et al., The Influence of Sulfur Additions on the Corrosive Environments in a Waste-Fired CFB Boiler, Materials Science Forum, vol.522, pp.563-570, 2006.

Y. Kawahara, High Temperature Corrosion Mechanisms and Effect of alloying Elements for Materials Used in Waste Incineration Environment, Corrosion Science, vol.44, pp.223-245, 2002.

H. J. Grabke, E. Reese, and M. Spiegel, The Effects of Chloride, Hydrogen Chloride, and Sulfur Dioxide in the Oxidation of Steels below Deposits, Corrosion Science, vol.37, pp.1023-1043, 1995.

P. Steinmetz and C. Rapin, Corrosion of Metallic Materials in Waste Incinerators, Materials Science Forum, vol.251, pp.505-518, 1997.

J. Mochinaga, H. Ohtani, and K. Igarashi, Phase diagram of ternary dysprosium trichloride-potassium chloride-sodium chloride systems, Denki Kagaku oyobi Kogyo Butsuri Kagaku, vol.49, pp.19-21, 1981.

J. M. Sangster, A. D. Pelton, N. Li, K. ). , (. Cl et al., Critical Coupled Evaluation of Phase Diagrams and Thermodynamic Properties of Binary and Ternary Alkali Salt Systems, Special Report to the Phase Equilibria Program, Part B: Evaluations for 54 common-ion binary systems involving, pp.4-231, 1987.

A. Wolters, The ternary system : Na2SO4, NaF, NaCl, Neues Jahrbuch für Geologie und Paläontologie, Beilageband, vol.30, pp.55-96, 1910.

G. I. Nagornyi and T. D. Zimina, Non reversible reciprocal system of sodium and barium chlorides and Sulfates, Izv. Fiz.-Khim. Nauchno-Issled. Inst. Irkutsk. Gos. Univ, vol.2, pp.31-40, 1953.

S. M. Mukimov, Double decomposition in the absence of a solvent. XLVII. Property (fusion) diagrams of the ternary systems of sodium and potassium fluorides, chlorides and sulfates, Izv. Sekt. Fiz.-Khim. Anal., Inst. Obshch. Neorg. Khim., Akad. Nauk SSSR, vol.12, pp.19-38, 1940.

J. J. Rowe, G. W. Morey, and C. S. Zen, The quinary reciprocal salt system Na, K, Mg, Ca/Cl, SO4 ; a review of the literature with new data, Geological Survey Professional Paper, vol.741, pp.1-37, 1972.

E. Jänecke, The Reciprocal Salt Couples NaCl-K2SO4, KCl-Na2SO4, Zeitschrift für Physikalische Chemie, vol.64, pp.343-356, 1909.

E. K. Akopov and A. G. Bergman, Reversible-adiagonal system of sodium and potassium chlorides and sulfates, Russian Journal of Organic Chemistry, vol.24, pp.1524-1532, 1954.

E. Jänecke, ;. Muehlhaeusser, and W. , The reciprocal salt pairs, Cl2-SO4), vol.228, pp.241-248, 1936.

D. Freyer, W. Voigt, and K. Köhnke, The phase diagram of the system Na2SO4-CaSO4, European Journal of Solid State and Inorganic Chemistry, vol.35, pp.595-606, 1998.

R. Nacken, On the Formation and Inversion of Mix-crystals and Double Salts in the Binary Systems of the Dimorphous Sulphates of Lithium, Sodium, Potassium and Silver, Neues Jahrbuch für Geologie und Paläontologie, vol.24, pp.1-68, 1907.

W. Eysel, Crystal-chemistry of System Na2SO4-K2SO4-K2CrO4-Na2CrO4 and of Glaserite Phase, American Mineralogist, vol.58, pp.736-747, 1973.

R. Nacken, Transformation Phenomena in Mixed Crystals of Sodium Sulfate and Calcium Sulfate, Zentralbl. Mineral., Geol. Palaeontol, pp.262-271, 1910.

H. Du, Thermodynamic assessment of the K2SO4-Na2SO4-MgSO4-CaSO4 system, Journal of phase equilibria, vol.21, pp.6-18, 2000.

J. J. Rowe, G. W. Morey, and I. D. Hansen, The binary system K2SO4 CaSO4, Journal of Inorganic and Nuclear Chemistry, vol.27, pp.53-58, 1965.

A. Bellanca, L'aftitalite nel sistema temario K2SO4-Na2SO4-CaSO4, Periodico di Mineralogia, vol.13, pp.21-86, 1942.

E. Jänecke, Über das Schmelz-und Erstarrungsbild des doppelt-ternären Systemes (K2·Na2·Mg)(Cl2· SO4), Zeitschrift für anorganische Chemie, vol.261, pp.213-225, 1950.

I. Diop, Rapport interne, Veolia, 2008.

M. S. Golubeva and A. G. Bergman, Ternary mutual system consisting of chlorides and sulfates of potassium and calcium, Zh. Obshch. Khim, vol.26, pp.328-338, 1956.

N. N. Evseeva and A. G. Bergman, Reciprocal system of sodium and zinc chlorides and sulfates, Izv. Sekt. Fiz.-Khim. Anal., Inst. Obshch. Neorg. Khim., Akad. Nauk SSSR, vol.21, pp.208-227, 1952.

F. R. Duke and R. A. Fleming, Density and Electrical Conductance in the System KCl-ZnCl2, Journal of The Electrochemical Society, vol.104, pp.251-254, 1957.

N. P. Lushnaya, N. N. Evseeva, and I. P. Vereshchetina, Physical properties of salt melts and the nature of their structural parts, Russian Journal of Inorganic Chemistry, vol.1, pp.35-45, 1956.

M. Spiegel, Der Einfluss Partikelförmer Schadstoffe auf die Kesselkorrosionen, presentation orale Solothum, 2003.

N. Saunders and A. P. Miodownik, , 1998.

H. L. Lukas, S. G. Fries, and B. Sundman, Computational Thermodynamics: The Calphad Method, 2007.

A. D. Pelton, A. Gabriel, and J. Sangster, Liquidus Measurements and Coupled Thermodynamic-Phase Diagram Analysis of the NaCl-KCl System, J. Chem. Soc., Farad. Trans. I, vol.81, pp.1167-1172, 1985.

C. W. Bale, P. Chartrand, S. A. Degterov, G. Eriksson, K. Hack et al., FactSage thermochemical software and databases, Calphad, vol.26, pp.189-228, 2002.

J. Sangster, K. Na, . Rb, /. Cs, . Cl et al., Thermodynamics and Phase Diagrams of 32 Binary Common-Ion Systems of the Group Li, vol.21, pp.241-68, 2000.

D. Lindberg, R. Backman, and P. Chartrand, Thermodynamic evaluation and optimization of the (NaCl+ Na2SO4+Na2CO3+KCl+K2SO4+K2CO3) system, The Journal of Chemical Thermodynamics, vol.39, pp.1001-1021, 2007.

D. Lindberg, R. Backman, and P. Chartrand, Thermodynamic evaluation and optimization of the (Na2SO4+ K2SO4+Na2S2O7+K2S2O7) system, The Journal of Chemical Thermodynamics, vol.38, pp.1568-1583, 2006.

C. Robelin and P. Chartrand, Thermodynamic evaluation and optimization of the (NaCl+KCl+MgCl2+ CaCl2+ZnCl2) system, The Journal of Chemical Thermodynamics, vol.43, pp.377-391, 2011.

E. K. Akopov and A. G. Bergman, Decomposition of the solid solutions in the reciprocal system of the chlorides and sulfates of sodium and potassium, Russian Journal of Inorganic Chemistry, vol.4, pp.745-747, 1959.

D. Lindberg, R. Backman, P. Chartrand, and M. Hupa, Towards a Comprehensive Thermodynamic Database for Ash-forming Elements in Biomass and Waste Combustion-Current Situation and Future Developments, Fuel Processing Technology, vol.105, pp.129-141, 2013.

O. Sackur, Fused Salts as Solvents I, Cryoscopic Investigations, Zeitschrift für Physikalische Chemie, vol.78, pp.550-563, 1912.

A. G. Bergman and A. K. Sementsova, Troinye Sistemy K2Cl2-Na2SO4-Na2CO3 I Na2Cl2-K2SO4-K2CO3, Zhurnal Neorganicheskoi Khimii, vol.3, pp.393-402, 1958.

H. J. Grabke, Fundamental aspects of oxidation, sulfidation, chloridation and carburization in the gasifier environment, Materials at high temperatures, vol.11, pp.23-29, 1993.

S. Enestam, D. Bankiewicz, J. Tuiremo, K. Mäkelä, and M. Hupa, Are NaCl and KCl equally corrosive on superheater materials of steam boilers?, Fuel, vol.104, pp.294-306, 2013.

J. Lehmusto, P. Yrjas, B. J. Skrifvars, and M. Hupa, High temperature corrosion of superheater steels by KCl and K2CO3 under dry and wet conditions, Fuel Processing Technology, vol.104, pp.253-264, 2012.

T. Jonsson, N. Folkeson, J. E. Svensson, L. G. Johansson, and M. Halvarsson, An ESEM in situ investigation of initial stages of the KCl induced high temperature corrosion of a Fe-2.25 Cr1Mo steel at 400°C, Corrosion Science, vol.53, pp.2233-2246, 2011.

F. Soutrel, Comportement de métaux purs (Fe, Ni, Cr et Al) et de leurs alliages dans des conditions simulant celles rencontrées en milieu incinérateur d'O.M, 1998.

H. J. Grabke, E. Reese, and M. Spiegel, The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits, Corrosion Science, vol.37, pp.1023-1043, 1995.

C. Robelin, P. Chartrand, and A. D. Pelton, Thermodynamic evaluation and optimization of the (NaCl+KCl+MgCl2+CaCl2+MnCl2+FeCl2+CoCl2+NiCl2) system, The Journal of Chemical Thermodynamics, vol.36, pp.809-828, 2004.

A. Roine, Outokumpu HSC chemistry for windows: chemical reaction and equilibrium software with extensive thermochemical database. User's guide, 2002.

R. A. Rapp, Hot Corrosion of Materials : a Fluxing Mechanism?, Corrosion Science, vol.44, pp.209-221, 2002.

T. Ishitsuka and K. Nose, Stability of Protective Oxide Films in Waste Incineration EnvironmentSolubility Measurement of Oxides in Molten Chlorides, Corrosion Science, vol.44, pp.247-263, 2002.

R. A. Rapp and N. Otsuka, The role of chromium in the hot corrosion of metals, ECS Transactions, vol.16, pp.271-282, 2009.

M. Spiegel, Influence of gas phase composition on the Hot Corrosion of steels and nickel-based alloys beneath a (Ca-Na-K)-sulfate mixture containing PbSO4 and ZnSO4, Materials and Corrosion, vol.51, pp.303-312, 2000.

B. A. Baker, G. D. Smith, and L. E. Shoemaker, Performance of Commercial Alloys in Simulated Waste Incineration Environments, CORROSION, issue.183, 2001.

H. J. Grabke, M. Spiegel, and A. Zahs, Role of alloying elements and carbides in the chlorine-induced corrosion of steels and alloys, Materials Research, vol.7, pp.89-95, 2004.

S. Andersson, E. W. Blomqvist, L. Bäfver, F. Jones, K. Davidsson et al., Sulfur recirculation for increased electricity production in Waste-to-Energy plants, Waste management, vol.34, pp.67-78, 2014.

W. W. Luo, Z. D. Liu, Y. T. Wang, and R. J. Yang, High temperature corrosion behaviors of the superheater materials, Procedia Engineering, vol.36, pp.212-216, 2012.

H. P. Nielsen, F. J. Frandsen, K. Dam-johansen, and L. L. Baxter, The implications of chlorine-associated corrosion on the operation of biomass-fired boilers, Progress in energy and combustion science, vol.26, pp.283-298, 2000.

N. P. Lushnaya, N. N. Evseeva, and I. P. Vereshchetina, Physical properties of salt melts and the nature of their structural parts, Russian Journal of Inorganic Chemistry, vol.1, pp.35-45, 1956.

D. Bankiewicz, S. Enestam, P. Yrjas, and M. Hupa, Experimental studies of Zn and Pb induced high temperature corrosion of two commercial boiler steels, Fuel Processing Technology, vol.105, pp.89-97, 2013.

V. Chapitre, Influence des éléments d'alliage de l'Inconel 625 sur la tenue à la corrosion

. .. Microstructures,

, II) Corrosion des alliages modèles dans la cendre # 40% Cl sous air, p.169

. , 169 2) Effet des éléments d'alliages sur la résistance à la corrosion, Comparaison des vitesses de corrosion des différents alliages avec l'alliage commercial

. , Bilan des essais de corrosion sous air

. , Influence de l'atmosphère gazeuse sur le comportement en corrosion des alliages modèles

.. .. Etude-de-la-corrosion-sous-gaz,

, Rôle des éléments d'alliage sur la résistance à la corrosion sous atmosphère gaz 181

.. .. Bilan,

. .. Conclusion,

H. L. Eiselstein and D. J. Tillack, The invention and definition of alloy 625, Superalloys 718, 625 and Various Derivatives, The Minerals, Metals & Materials Society, pp.1-14, 1991.

P. E. Turchi, L. Kaufman, and Z. K. Liu, Modeling of Ni-Cr-Mo based alloys: Part I-phase stability, Calphad, vol.30, pp.70-87, 2006.

J. M. Joubert, B. Sundman, and N. Dupin, Assessment of the niobium-nickel system, Calphad, vol.28, pp.299-306, 2004.

C. C. Silva, H. C. De-miranda, and M. F. Motta, New insight on the solidification path of an alloy 625 weld overlay, Journal of Materials Research and Technology, vol.2, pp.228-237, 2013.

J. M. Perrow and W. W. Smeltzer, The Oxidation of an Iron-5 Per Cent Chromium Alloy in the Temperature Range 600-850° C, Journal of the Electrochemical Society, vol.109, pp.1023-1026, 1962.