L. Awoyemi and U. Westermark, Effects of borate impregnation on the response of wood Sstrength to Hheat Ttreatment, Wood Science and Technology, vol.39, pp.484-491, 2005.

E. Baysal, S. K. Ozaki, and M. K. Yalinkilic, Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates, Wood Science and Technology, vol.38, pp.405-415, 2004.

M. T. Bhuiyan, N. Hirai, and N. Sobue, Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions, Journal of Wood Science, vol.46, pp.431-436, 2000.

K. Candelier, S. Dumarçay, A. Pétrissans, P. Gérardin, and M. Pétrissans, Comparison of chemical composition and decay durability of heat treated wood cured under different inert atmospheres: Nitrogen or vacuum, Polymer Degradation and Stability, vol.98, pp.677-681, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02064070

J. L. Clément, A. G. Bagnères, P. Uva, L. Wilfert, A. Quintana et al., Biosystematics of Reticulitermes termites in Europe: morphological, chemical and molecular data, Insects Soc, vol.48, pp.202-215, 2001.

T. Ding, L. Gu, and T. Li, Influence of steam pressure on physical and mechanical properties of heat-treated mongolian Pine Lumber, European Journal of Wood and Wood Products, vol.69, pp.121-126, 2010.

S. Doi, Y. Kurimoto, W. Ohmura, S. Ohara, M. Aoyama et al., Effects of heat treatments of wood on the feeding behaviour of two subterranean termites, Holzforschung, vol.53, pp.225-229, 2005.

B. Esteves, L. Nunes, I. Domingos, and H. Pereira, Improvement of termite resistance, dimensional stability and mechanical properties of pine wood by paraffin impregnation, 2014.

, European Journal of Wood and Wood Products, vol.72, pp.609-615

M. M. González-peña, S. F. Curling, and M. D. Hale, On the effect of heat on the chemical composition and dimensions of thermally-modified wood, Polymer Degradation and Stability, vol.94, pp.2184-2193, 2009.

M. Hakkou, M. Pétrissans, A. Zoulalian, and P. Gérardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polymer Degradation and Stability, vol.89, pp.1-5, 2005.

C. A. Hill, Wood Modification: chemical, thermal and other processes, p.9780470021729, 2006.

S. N. Kartal and F. Green, Leachability of boron from wood treated with natural and semisynthetic polymers and calcium precipitating agent, Holz Als Roh-Und Werkstoff, vol.61, pp.388-389, 2003.

S. N. Kartal, Combined effect of boron compounds and heat treatments on wood properties: Boron release and decay and termite resistance, Holzforschung, vol.60, pp.455-458, 2006.

S. N. Kartal, W. J. Hwang, and Y. Imamura, Combined effect of boron compounds and heat treatments on wood properties: Chemical and strength properties of wood, Journal of Materials Processing Technology, vol.198, pp.234-240, 2008.

S. N. Kartal, T. Y. Oshimura, and Y. Imamura, Decay and termite resistance of borontreated and chemically modified wood by in situ co-polymerization of allyl glycidyl ether (AGE) with methyl methacrylate (MMA), International Biodeterioration & Biodegradation, vol.53, pp.111-117, 2004.

Y. Kubojima, T. Okano, and M. Ohta, Bending strength and toughness of heat-treated wood, Journal of Wood Science, vol.46, pp.8-15, 2000.

S. L. Levan and J. E. Winandy, Effects of fire retardant treatments on wood strength: a review, Wood and Fiber Science, vol.22, pp.113-131, 1990.

N. Lina, T. Nobre, B. Gigante, and A. M. Silva, Toxicity of pine resin derivatives to subterranean termites (Isoptera: Rhinotermitidae), An International Journal, vol.15, pp.521-528, 2004.

F. Mburu, S. Dumarçay, J. F. Bocquet, M. Petrissans, and P. Gérardin, Effect of chemical modifications caused by heat treatment on mechanical properties of Grevillea Robusta Wood, Polymer Degradation and Stability, vol.93, pp.401-405, 2008.
URL : https://hal.archives-ouvertes.fr/hal-02102712

H. Militz, Thermal treatment of wood: European Processes and Their Background, 2002.

, IRG International Reserch Group on Wood Protection. Document N0. IRG/WP, pp.2-40241

A. Mohareb, P. Sirmah, M. Pétrissans, and P. Gérardin, Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus Patula, European Journal of Wood and Wood Products, vol.70, pp.519-524, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02064922

A. Mohareb, M. F. Thévenon, E. Wozniak, and P. Gérardin, Effects of monoglycerides on leachability and efficacy of boron wood preservatives against decay and termites, International Biodeterioration & Biodegradation, vol.64, pp.135-138, 2010.

A. Mohareb, M. F. Thévenon, E. Wozniak, and P. Gérardin, Effects of polyvinyl alcohol on leachability and efficacy of boron wood preservatives against fungal decay and termite attack, Wood Science and Technology, vol.45, pp.407-417, 2010.

T. Nobre, L. Nunes, P. Eggleton, and D. E. Bignell, Distribution and genetic variation of Reticulitermes (Isoptera:Rhinotermitidae) in Portugal, Heredity, vol.96, pp.403-409, 2006.

N. Yilgör and S. N. Kartal, Heat modification of wood: chemical properties and resistance to mold and decay fungi, Forest Products Journal, vol.60, pp.357-361, 2010.

D. N. Obanda, T. F. Shupe, and H. M. Barnes, Reducing leaching of boron-based wood preservatives: a review, Bioresource Technology, vol.99, pp.7312-7322, 2008.

F. O. Akong, M. Multlu, A. Pasc, P. Gérardin, and C. Gérardin-charbonnier, Hydrogels obtained from an original catanionic system for efficient formulation of boron woodpreservatives, International Biodeterioration & Biodegradation, vol.77, pp.123-126, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01593622

F. O. Akong, P. Gérardin, M. F. Thévenon, and C. Gérardin-charbonnier, Hydrogel-based boron salt formulations for wood preservation, Wood Science and Technology, vol.49, pp.443-456, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01597077

J. V. Oliver-villanueva, P. Gascón-garrido, and M. Ibiza-palacios, Evaluation of thermally-treated wood of beech (Fagus Sylvatica L.) and Ash (Fraxinus Excelsior L.) against mediterranean termites (Reticulitermes Spp.), European Journal of Wood and Wood Products, vol.71, pp.391-393, 2013.

A. O. Rapp, M. Sailer, and R. Despot, Oil-heat-treatment of wood-process and properties, 2001.

, International Conference: wood in construction industry-tradition and future, pp.27-38

C. Roussel, V. Marchetti, A. Lemor, E. Wozniak, B. Loubinoux et al., Chemical modification of wood by polyglycerol/maleic anhydride treatment, Holzforschung, vol.55, pp.57-62, 2001.
DOI : 10.1515/hfsg.2001.57

S. Salman, A. Pétrissans, M. F. Thévenon, S. Dumarçay, D. Perrin et al., Development of new wood treatments combining boron impregnation and thermo modification: Effect of additives on boron leachability, vol.72, pp.355-365, 2014.

Q. Wang, J. Li, and J. E. Winandy, Chemical mechanism of fire retardance of Boric, Science and Technology, vol.38, pp.375-389, 2004.

J. E. Winandy, Thermal degradation of fire-retardant treated wood: predicting residual service life, Forest Products Journal, vol.51, pp.47-54, 2001.

L. Yan and J. Morrell, Effects of thermal modification on physical and mechanical properties of Douglas-fir heartwood, BioResources, vol.9, pp.7152-7161, 2014.

R. Bravery-af, A miniaturised wood-block test for the rapid evaluation of wood preservative fungicides, Screening techniques for potential wood preservative chemicals. Proceedings of a special seminar held in association with the 10th annual meeting of the IRG, 1978.

C. M. Pétrissans, M. Pétrissans, A. Gérardin, and P. , Utilization of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species, Polym Degrad Stab, vol.95, pp.2255-2259, 2010.

C. M. Dumarçay, S. Pétrissans, A. Pétrissans, M. Gérardin, and P. , Effect of heat treatment intensity on some conferred properties of different European softwood and hardwood species, Wood Sci Technol, vol.47, pp.663-673, 2013.

N. F. , Wood preservatives, Laboratory method for obtaining samples for analysis to measure losses by leaching water or synthetic sea water, pp.41-569, 2014.

. , Wood preservatives-determination of toxic values of wood preservatives against wood destroying basidiomycetes cultured on agar medium, European committee for standardization, 1986.

. , Wood preservatives-Determination of toxic values against Reticulitermes species (European termites) (laboratory method), European committee for standardization, 2013.

E. B. Pereira and H. M. , Wood modification by heat treatment-A review, 2009.

, Bioresources, vol.4, pp.370-404

G. Oliver-villanueva, J. V. Ibiza-palacios-m, H. Militz, M. C. , and A. S. , Resistance of wood modified with different technologies against Mediterranean termites (Reticulitermes spp, Int Biodeter Biodegr, vol.82, pp.13-16, 2013.

G. P. , New alternatives for wood preservation based on thermal and chemical modification of wood-a review, Annals of Forest Science, 2016.

H. , P. M. , G. P. , and Z. A. , Investigations of the reasons for fungal durability of heat-treated beech wood, Polymer Degradation and Stability, vol.91, issue.2, pp.393-397, 2005.

M. H. , Thermal treatment of wood: European processes and their background, The International Research Group on Wood Preservation, p.2, 2002.

M. F. Dumarçay, S. Huber-f, M. Pétrissans, and P. Gérardin, , 2007.

, Evaluation of thermally modified Grevillea robusta heartwood as an alternative to shortage of wood resource in Kenya: Characterisation of physicochemical properties and improvement of bio-resistance, Bioresour Technol, vol.98, pp.3478-3486

R. C. Marchetti-v, A. Lemor, . Wozniak-e, and . Loubinoux-b,

G. P. , Chemical modification of wood by polyglycerol /maleic anhydride treatment, Holzforschung, vol.55, pp.57-62, 2001.

S. S. Pétrissans, A. Thévenon, M. F. Dumarçay, and S. Perrin-d,

P. B. Gérardin and P. , Development of new wood treatments combining boron impregnation and thermo modification-Effect of additives on boron leachability, Eur. J. Wood Prod, vol.72, pp.355-365, 2014.

S. S. Pétrissans, A. Thévenon, M. F. Dumarçay, S. Gérardin, and P. , Decay and termites resistance of pine blocks impregnated with different additives and subjected to heat treatment, Eur. J. Wood Prod, vol.74, pp.37-42, 2016.

J. L. Shi, D. Kocaefe, T. Amburgey, and J. L. Zhang, A comparative study on brown-rot fungus decay and subterranean termite resistance of thermally-modified and ACQC-treated wood, Holz als Roh und Werstoff, vol.65, issue.5, pp.353-358, 2007.

S. H. Can, A. De-troya-t, and . Conde-m, Comparative biological resistance of differently thermal modified wood species against decay fungi, Reticulitermes grassei and Hylotrupes bajulus, Maderas-Cienca Y Technologia, vol.17, issue.3, pp.559-570, 2015.

S. P. Marion, C. Huber-f, and P. Gérardin, Synthesis of, 2003.
URL : https://hal.archives-ouvertes.fr/inria-00000660

, Polyglycerol Methacrylate and its Application to Wood Dimensional Stabilization, J Appl Polym Sci, vol.88, pp.743-749

S. T. Charrier, F. Malvestio, J. Charrier-b, A. Moubarik, and . Castéra,

P. Grelier-s, Physical properties and termite durability of maritime pine Pinus pinaster Ait heat-treated under vacuum pressure, Wood Sci Technol, vol.46, pp.487-501, 2012.

W. , C. L. Lin, T. S. Li, and M. H. , Decay and termites resistance of planted tree sapwood modified by acetylation, Taiwan Journal of Forest Science, vol.17, issue.4, pp.483-490, 2002.

W. C. Brischke and C. Rapp-a, Influence of treatment temperature and duration on selected biological, mechanical, physical and optical properties of thermally modified timber, Wood Material Science and Engineering, vol.2, issue.2, pp.66-76, 2007.

E. Borredon, X. Deglise, and C. Vaca-garcia, , 2009.

K. Candelier, S. Dumarçay, A. Pétrissans, L. Desharnais, P. Gérardin et al., Comparison of chemical composition and decay durability of heat treated wood cured under different inert atmospheres: Nitrogen or vacuum, Polym. Degrad. Stab, vol.98, pp.677-681, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01591857

M. Chaouch, M. Pétrissans, A. Pétrissans, G. , and P. , Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species, Polym. Degrad. Stab, vol.95, pp.2255-2259, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02088960

S. Doi, Y. Kurimoto, W. Ohmura, S. Ohara, M. Aoyama et al., Effects of Heat Treatments of Wood on the Feeding Behaviour of Two Subterranean Termites, Holzforschung, vol.53, pp.225-229, 2005.

B. Esteves and H. Pereira, WOOD MODIFICATION BY HEAT TREATMENT: A REVIEW, BioResources, vol.4, pp.370-404, 2008.

A. C. Gusse, P. D. Miller, and T. J. Volk, Fungus growth was inhibited due to poisonous nature of phenol, Env. Sci Technol, vol.40, pp.4196-4199, 2005.

M. Hakkou, M. Pétrissans, A. Zoulalian, G. , and P. , Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polym. Degrad. Stab, vol.89, pp.1-5, 2005.

S. N. Kartal, Combined effect of boron compounds and heat treatments on wood properties: Boron release and decay and termite resistance, Holzforschung, vol.60, pp.455-458, 2006.

S. N. Kartal and F. Green, Leachability of boron from wood treated with natural and semi-synthetic polymers and calcium precipitating agent, Holz Als Roh-Werkst, vol.61, pp.388-389, 2003.

A. M. Kawamoto, L. C. Pardini, M. F. Diniz, V. L. Lourenço, and M. F. Takahashi, Synthesis of a boron modified phenolic resin, J AerospTechnol Manag, vol.2, pp.169-182, 2010.

S. H. Lee, A. , and Z. , Durability of phenolic-resin-treated sesenduk (Endospermum diadenum) and jelutong (Dyera costulata) wood against white rot fungus, Eur. J. Wood Wood Prod, vol.73, pp.553-555, 2015.

L. Nunes, T. Nobre, B. Gigante, and A. M. Silva, Toxicity of pine resin derivatives to subterranean termites (Isoptera: Rhinotermitidae), Manag. Environ. Qual. Int. J, vol.15, pp.521-528, 2004.

F. Mburu, S. Dumarçay, J. F. Bocquet, M. Petrissans, G. et al., Effect of chemical modifications caused by heat treatment on mechanical properties of Grevillea robusta wood, Polym. Degrad. Stab, vol.93, pp.401-405, 2008.
URL : https://hal.archives-ouvertes.fr/hal-02102712

A. Mohareb, M. F. Thévenon, E. Wozniak, G. , and P. , Effects of monoglycerides on leachability and efficacy of boron wood preservatives against decay and termites, Int. Biodeterior. Biodegrad, vol.64, pp.135-138, 2010.

A. Mohareb, P. Sirmah, M. Pétrissans, G. , and P. , Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula, Eur. J. Wood Wood Prod, vol.70, pp.519-524, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02064922

D. N. Obanda, T. F. Shupe, and H. M. Barnes, Reducing leaching of boron-based wood preservatives-A review of research, Bioresour. Technol, vol.99, pp.7312-7322, 2008.

F. Obounou-akong, P. Gérardin, M. Thévenon, and C. Gérardin-charbonnier, , 2015.

, Hydrogel-based boron salt formulations for wood preservation, Wood Sci. Technol, vol.49, pp.443-456

J. Oliver-villanueva, P. Gascón-garrido, M. Ibiza-palacios, and S. De, Evaluation of thermally-treated wood of beech (Fagus sylvatica L.) and ash (Fraxinus excelsior L.) against Mediterranean termites (Reticulitermes spp.), Eur. J. Wood Wood Prod, vol.71, pp.391-393, 2013.

O. Perçin, S. D. Sofuoglu, and O. Uzun, Effects of Boron Impregnation and Heat Treatment on Some Mechanical Properties of Oak (Quercus petraea Liebl, BioResources, vol.10, pp.3963-3978, 2015.

M. Pétrissans, P. Gérardin, I. E. Bakali, and M. Serraj, Wettability of Heat-Treated Wood, Holzforschung, vol.57, pp.301-307, 2005.

S. Salman, A. Pétrissans, M. F. Thévenon, S. Dumarçay, D. Perrin et al., Development of new wood treatments combining boron impregnation and thermo modification: effect of additives on boron leachability, Eur. J. Wood Wood Prod, vol.72, pp.355-365, 2014.

S. Salman, A. Pétrissans, M. F. Thévenon, S. Dumarçay, G. et al., Decay and termite resistance of pine blocks impregnated with different additives and subjected to heat treatment, Eur. J. Wood Wood Prod, vol.74, pp.37-42, 2016.

M. I. Shams, Y. , and H. , Compressive deformation of phenol formaldehyde (PF) resin-impregnated wood related to the molecular weight of resin, Wood Sci. Technol, vol.45, pp.73-81, 2010.

H. Sivrikaya, A. Can, T. De-troya, and M. Conde, Comparative biological resistance of differently thermal modified wood species against decay fungi, Reticulitermes grassei and Hylotrupes bajulus, Maderas Cienc. Tecnol, vol.17, pp.559-570, 2015.

T. Surini, F. Charrier, J. Malvestio, B. Charrier, A. Moubarik et al., Physical properties and termite durability of maritime pine Pinus pinaster Ait., heattreated under vacuum pressure, Wood Sci. Technol, vol.46, pp.487-501, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00747658

M. F. Thevenon, A. Pizzi, and J. Haluk, Non-toxic albumin and soja protein borates as ground-contact wood preservatives, Holz Als Roh-Werkst, vol.55, pp.293-296, 1997.

B. F. Tjeerdsma and H. Militz, Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood, Holz Als Roh-Werkst, vol.63, pp.102-111, 2005.

T. Turkoglu, E. Baysal, M. Yuksel, H. Peker, C. Sacli et al., , 2016.

, Mechanical Properties of Impregnated and Heat Treated Oriental Beech Wood, BioResources, vol.11, pp.8285-8296

O. Unsal, S. Korkut, A. , and C. , THE EFFECT OF HEAT TREATMENT ON SOME PROPERTIES AND COLOUR IN EUCALYPTUS, vol.5, pp.145-152, 2003.

P. M. Visakh, T. , and S. , Preparation of Bionanomaterials and their Polymer Nanocomposites from Waste and Biomass, Waste Biomass Valorization, vol.1, pp.121-134, 2010.

, Une autre perspective de ces travaux concerne l'imprégnation du bois avec des résines phénolformaldéhyde. En effet, il serait également très intéressant de compléter le travail portant sur l'influence de ce prétraitement sur les propriétés mécaniques du bois, monomères vinyliques et soumis à un traitement thermique à différentes températures, p.150

R. Bibliographiques,

W. Abbot, B. Woodward, W. , and M. , Efficacy of copper borax preservative against wood decay, Proceedings of 97th Annual Meeting of the American WoodPreservers' Association (AWPA). Minneapolis Marriott City Center, vol.97, 2000.

R. Alén, R. Kotilainen, and A. Zaman, Thermochemical behavior of Norway spruce (Picea abies) at 180-225 ° C, Wood Sci. Technol, vol.36, pp.163-171, 2000.

F. Aloui, N. Ayadi, F. Charrier, C. , and B. , Durability of European oak (Quercus petraea and Quercus robur) against white rot fungi (Coriolus versicolor): relations with phenol extractives, Holz Als Roh-Werkst, vol.62, pp.286-290, 2004.

N. Amusant, C. Moretti, B. Richard, E. Prost, J. M. Nuzillard et al., Chemical compounds from Eperua falcata and Eperua grandiflora heartwood and their biological activities against wood destroying fungus (Coriolus versicolor), Holz Als RohWerkst, vol.65, p.23, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00135691

Z. Ashaari, C. S. Moy, A. S. Sajap, . Md, and P. Tahir, Resistance of CCA and borontreated rubberwood composites against termites, Coptotermes curvignathus Holmgren, Pertanika J. Sci. Technol, vol.11, pp.65-72, 2003.

J. W. Austin, A. L. Szalanski, T. G. Myles, P. A. Borges, L. Nunes et al., First record of Reticulitermes flavipes (Isoptera: Rhinotermitidae) from Terceira Island, vol.95, pp.196-198, 2012.

B. F. Bakar, S. Hiziroglu, and P. M. , Properties of some thermally modified wood species, Materials & Design, vol.43, pp.348-355, 2013.

H. M. Barnes, T. L. Armburgey, L. H. Williams, and J. J. Morrell, Borates as wood preserving compounds; the status of research in the United States, 1989.

E. Baysal, S. K. Ozaki, Y. , and M. K. , Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates, Wood Sci. Technol, vol.38, pp.405-415, 2004.

E. Baysal, M. Altinok, M. Colak, S. K. Ozaki, and H. Toker, Fire resistance of Douglas fir (Pseudotsuga menzieesi) treated with borates and natural extractives, Bioresour. Technol, vol.98, pp.1101-1105, 2007.

P. Bekhta and P. Niemz, Effect of high temperature on the change in color, dimensional stability and mechanical properties of Spruce Wood, Holzforschung, vol.57, pp.539-546, 2005.

T. R. Bhuiyan and N. Hirai, Study of crystalline behavior of heat-treated wood cellulose during treatments in water, Journal of Wood Science, vol.51, pp.42-47, 2005.

F. Bongers, J. Alexander, A. Jorissen, H. J. Blaß, and C. Hill, Acetylated wood in structural applications, Proc. 5th Eur. Conf. on Wood modification, 2010.

M. J. Boonstra and B. Tjeerdsma, Chemical analysis of heat treated softwoods, Holz Als Roh-Werkst, vol.64, pp.204-211, 2006.

E. Borredon, X. Deglise, and C. Vaca-garcia, , 2009.

J. Bourgois, G. , and R. , Characterization and analysis of torrefied wood, Wood Sci. Technol, vol.22, pp.143-155, 1988.
URL : https://hal.archives-ouvertes.fr/emse-00447463

J. Bourgois, M. C. Bartholin, G. , and R. , Thermal treatment of wood: analysis of the obtained product, Wood Sci. Technol, vol.23, pp.303-310, 1989.
URL : https://hal.archives-ouvertes.fr/emse-00447276

J. M. Brignon and S. Soleille, Données technico-économiques sur les substances chimiques en France, 2005.

N. Brosse, R. El-hage, M. Chaouch, M. Pétrissans, S. Dumarçay et al., Investigation of the chemical modifications of beech wood lignin during heat treatment, Polym. Degrad. Stab, vol.95, pp.1721-1726, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02089136

A. Byrne, M. , and P. , Recent research in boron treatment of Canadian wood species, Int. Conf. Wood Protection with Diffusible Preservatives and Pesticides, pp.55-61, 1997.

K. Candelier, M. Chaouch, S. Dumarçay, A. Pétrissans, M. Pétrissans et al., Utilization of thermodesorption coupled to GC-MS to study stability of different wood species to thermodegradation, Journal of Analytical and Applied Pyrolysis, vol.92, pp.376-383, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02065232

K. Candelier, S. Dumarçay, A. Pétrissans, L. Desharnais, P. Gérardin et al., Comparison of chemical composition and decay durability of heat treated wood cured under different inert atmospheres: Nitrogen or vacuum, Polym. Degrad. Stab, vol.98, pp.677-681, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02064070

K. ;. Candelier and J. Schreiber, Caractérisation des transformations physico-chimiques intervenant lors de la thermodégradation du bois. Influence de l'intensité de traitement, de l'essence et de l'atmosphère, 2002.

M. Chaouch, Effet de l'intensité du traitement sur la composition élémentaire et la durabilité du bois traité thermiquement : développement d'un marqueur de prédiction de la résistance aux champignons basidiomycètes, 2011.

M. Chaouch, M. Pétrissans, A. Pétrissans, G. , and P. , Use of wood elemental composition to predict heat treatment intensity and decay resistance of different softwood and hardwood species, Polym. Degrad. Stab, vol.95, pp.2255-2259, 2010.
URL : https://hal.archives-ouvertes.fr/hal-02088960

J. L. Clément, A. G. Bagnères, P. Uva, L. Wilfert, A. Quintana et al., Biosystematics of Reticulitermes termites in Europe: morphological, chemical and molecular data, Insectes Sociaux, vol.48, pp.202-215, 2001.

F. Cui, P. , and A. , Emulsion compositions for wood protection, US Pat. Appl, 2006.

C. Weining and D. P. Kamdem, Bioefficiency of Boric acid grafted on to wood, pp.99-30202, 1999.

P. Detienne, Cours illustré d'anatomie des bois, p.9782759207978, 2011.

T. Dilik and S. Hiziroglu, Bonding strength of heat treated compressed Eastern redcedar wood, Mater. Des, vol.42, pp.317-320, 2012.

D. Dirol, G. , and R. , The improvment of wood durability by retification process, 24th Annual Meeting of the IRG/WP (International Research Group on Wood Preservation), pp.1-11, 1993.
URL : https://hal.archives-ouvertes.fr/emse-00493851

D. Dirol, D. , and X. , Fiche Technique durabilité des bois et problèmes associés, vol.10, p.2746201392, 2001.

S. Doi, Y. Kurimoto, W. Ohmura, S. Ohara, M. Aoyama et al., , 2005.

, Effects of heat treatments of wood on the feeding behaviour of two subterranean termites, Holzforschung, vol.53, pp.225-229

J. A. Drysdale, Boron treatments for the preservation of wood: A review of efficacy data for fungi and termites. International Research Group on wood preservation, 1994.

L. Duchez, G. , and R. , Optimisation d'un traitement thermique du bois via un plan factoriel fractionnaire, Analusis, vol.26, pp.39-44, 1998.
URL : https://hal.archives-ouvertes.fr/emse-00448192

S. Dumarçay, B. Bakhsous, E. Gelhaye, G. , and P. , Recherche de synergies entre chélateurs, antioxydants et biocides pour la mise au point de nouvelles formulations de préservation du bois. 6ème, Colloq. Sci. Ind. Bois, vol.2, pp.191-201, 1934.

W. Dwianto, F. Tanaka, M. Inoue, and M. Norimoto, Crystallinity changes of wood by heat or steam treatment. Wood research, Bull. Wood Res. Institute Kyoto University, vol.83, pp.47-49, 1996.

K. Edvardsen and K. M. Sandland, Increased drying temperature-Its influence on the dimensional stability of wood, Holz Als Roh-Werkst, vol.57, pp.207-209, 1999.

M. A. Engwall, J. J. Pignatello, G. , and D. , Degradation and detoxification of the wood preservatives creosote and pentachlorophenol in water by the photo-Fenton reaction, Water Res, vol.33, pp.1151-1158, 1999.

H. Epmeier, C. Bengtsson, and M. Westin, Effect of acetylation and heat treatment on dimensional stability and MOE of spruce timber, Proceedings for the First Conference of the European Society for Wood Mechanics, 2001.

K. E. Eriksson, Enzyme mechanisms involved in cellulose hydrolysis by the rot fungus Sporotrichum pulverulentum, Biotechnol. Bioeng, vol.20, pp.317-332, 1978.

K. E. Eriksson, R. A. Blanchette, and P. Ander, Morphological aspects of wood degradation by fungi and bacteria, Microbial and enzymatic degradation of wood and wood components, pp.1-87, 1990.
DOI : 10.1007/978-3-642-46687-8_1

B. Esteves and H. Pereira, Wood modification by heat treatment: A review, BioResources, vol.4, pp.370-404, 2008.

B. Esteves, A. V. Marques, I. Domingos, and H. Pereira, Heat-induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood, Wood Sci. Technol, vol.42, pp.369-384, 2007.
DOI : 10.1007/s00226-007-0157-2

URL : http://repositorio.ipv.pt/bitstream/10400.19/1077/1/Heat%20induced%20colour%20changes%20of%20pine%20REPOSIT%c3%93RIO.pdf

B. Esteves, I. Domingos, and H. Pereira, Improvement of technological quality of eucalypt wood by heat treatment in air at 170-200 ° C, Forest Products Journal, vol.57, pp.47-52, 2007.

B. Esteves, J. Graça, and H. Pereira, Extractive composition and summative chemical analysis of thermally treated eucalypt wood, Holzforschung, vol.62, pp.344-351, 2008.
DOI : 10.1515/hf.2008.057

B. Esteves, L. Nunes, and H. Pereira, Properties of furfurylated wood (Pinus pinaster), Eur. J. Wood Wood Prod, vol.69, pp.521-525, 2010.
DOI : 10.1007/s00107-010-0480-4

URL : http://repositorio.lnec.pt:8080/xmlui/bitstream/123456789/1002659/1/Properties%20of%20furfurylated%20wood%20%28Pinus%20pinaster%29.pdf

W. P. Findlay, Timber pests and diseases, 1967.

D. Fouquet, A. Zaremski, L. , and D. , Les termites dans le monde (Quae), 2009.

M. H. Freeman, C. R. Mcintyre, J. , and D. , A critical and comprehensive review of boron in wood preservation, Proceedings American Wood Protection Association, vol.105, pp.279-294, 2009.

T. Furono and Y. Imamura, Combination of wood and silicate, Part 6. Biological resistances of wood-mineral composites using water glass-boron compound system, Wood Sci Technol, vol.32, pp.161-170, 1998.

T. Furuno, Y. Imamura, and H. Kajita, The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a properties enhancement with neutralized phenolic-resin and resin penetration into wood cell walls, Wood Sci. Technol, vol.37, pp.349-361, 2003.

C. P. Gabrielli and F. A. Kamke, Phenol-formaldehyde impregnation of densified wood for improved dimensional stability, Wood Sci. Technol, vol.44, pp.95-104, 2009.

P. Gascón-garrido, J. V. Oliver-villanueva, M. S. Ibiza-palacios, H. Militz, C. Mai et al., Resistance of wood modified with different technologies against Mediterranean termites (Reticulitermes spp, Int. Biodeterior. Biodegrad, vol.82, pp.13-16, 2013.

M. González-peña, M. Breese, and C. Hill, Hygroscopicity in heat-treated wood: Effect of extractives, International Conference on Environmentally Compatible Forest Products (ICECFOP), pp.105-119, 2004.

J. K. Grace, Termite resistant wood products, Sociobiology, vol.41, pp.123-129, 2003.

J. Grace, Review of recent research on the use of borates for termite research, 2nd International Conference on Wood Protection with Diffusible Preservatives and Pesticides, pp.85-92, 1997.

S. Gray and D. Dickinson, CCA modifications and their effect on soft rot in hardwoods. Part 2. International Research Group on Wood Preservation, p.20, 1983.

F. Green and C. A. Clausen, Copper tolerance of brown-rot fungi: Oxalic acid production in southern pine treated with arsenic-free preservatives, Int. Biodeterior. Biodegrad, vol.56, pp.75-79, 2005.

D. Grenier, Développement du procédé de bi-oléothermie pour les bois de construction : mesure et modélisation des transferts de matière et de chaleur lors des opérations de friture-séchage et de refroidissement-imprégnation, 2006.

G. Gunduz, D. Aydemir, and G. Karakas, The effects of thermal treatment on the mechanical properties of wild Pear (Pyrus elaeagnifolia Pall.) wood and changes in physical properties, Materials and Design, vol.30, pp.4391-4395, 2009.

Y. S. Hadi, M. Westin, R. , and E. , Resistance of furfurylated wood to termite attack. For, Prod. J, vol.55, pp.85-88, 2005.

M. Hakkou, M. Pétrissans, A. Zoulalian, G. , and P. , Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polym. Degrad. Stab, vol.89, pp.1-5, 2005.

M. Hakkou, M. Pétrissans, P. Gérardin, and A. Zoulalian, Investigations of the reasons for fungal durability of heat-treated beech wood, Polym. Degrad. Stab, vol.91, pp.393-397, 2006.

A. Hermawan, T. Nakahara, H. Sakagami, N. Fujimoto, and K. Uchikura, , 2013.

, Performance of Sugi lamina impregnated with low-molecular weight phenolic resin, J. Wood Sci, vol.59, pp.299-306

S. Hietala, S. L. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Structure of thermally modified wood studied by liquid state NMR measurements, Holzforschung, vol.56, pp.522-528, 2005.

C. Hill, Wood Modification: Chemical, Thermal and Other Processes, 2006.

W. J. Hwang, S. N. Kartal, and Y. Imamura, Evaluation of new quaternary ammonium compound, didecyldimethylammonium tetrafluoroborate (DBF) in comparison with DDAC: Leachability and termite resistance tests, Holz Als Roh-Werkst, vol.64, pp.111-116, 2006.

A. Hyvönen, P. Piltonen, and J. Niinimäki, Tall oil/water-emulsions as water repellents for Scots pine sapwood, Holz Als Roh-Werkst, vol.64, pp.68-73, 2006.

G. N. Inari, M. Pétrissans, T. Lambert, J. Ehrhardt, G. et al., XPS characterization of wood chemical composition after heat treatment, Surface and Interface Analysis, vol.38, pp.1336-1342, 2006.

G. N. Inari, S. Mounguengui, S. Dumarçay, M. Pétrissans, G. et al., Evidence of char formation during wood heat treatment by mild pyrolysis, Polym. Degrad. Stab, vol.92, pp.997-1002, 2007.

J. Joseleau, Acquisition de connaissances fondamentales sur les mecanismes de transformtion des parois cellulaires du bois lors du traitment thermique de rétifications. Rapport à la région, 2000.

D. P. Kamdem, A. Pizzi, J. , and A. , Durability of heat-treated wood, Holz Als Roh-Werkst, vol.60, pp.1-6, 2002.

I. Karlson and K. Svalbe, Method of acetylating wood with gaseous ketene, Latv Lauksiamn Akad Raksti, vol.130, pp.10-21, 1977.

S. N. Kartal, Combined effect of boron compounds and heat treatments on wood properties: Boron release and decay and termite resistance, Holzforschung, vol.60, pp.455-458, 2006.

S. N. Kartal and F. Green, Leachability of boron from wood treated with natural and semi-synthetic polymers and calcium precipitating agent, Holz Als Roh-Werkst, vol.61, pp.388-389, 2003.

S. N. Kartal and Y. Imamura, Effects of N?-N-(1, 8-Naphthalyl) hydroxylamine (NHA-Na) and hydroxynaphthalimide (NHA-H) on boron leachability and biological degradation of wood, Holz Als Roh-Werkst, vol.62, pp.378-386, 2004.

S. N. Kartal, T. Yoshimura, and Y. Imamura, Decay and termite resistance of borontreated and chemically modified wood by in situ co-polymerization of allyl glycidyl ether (AGE) with methyl methacrylate (MMA), Int. Biodeterior. Biodegrad, vol.53, pp.111-117, 2004.

S. N. Kartal, W. J. Hwang, K. Shinoda, and Y. Imamura, Laboratory evaluation of boron-containing quaternary ammonia compound, didecyl dimethyl ammonium tetrafluoroborate (DBF) for control of decay and termite attack and fungal staining of wood, Holz Als Roh-Werkst, vol.63, pp.73-77, 2005.

S. N. Kartal, W. J. Hwang, A. Yamamoto, M. Tanaka, K. Matsumura et al., Wood modification with a commercial silicon emulsion: effects on boron release and decay and termite resistance, Int. Biodeterior. Biodegrad, vol.60, pp.189-196, 2007.

S. N. Kartal, T. Yoshimura, and Y. Imamura, Modification of wood with Si compounds to limit boron leaching from treated wood and to increase termite and decay resistance, Int. Biodeterior. Biodegrad, vol.63, pp.187-190, 2009.

T. Kirk and T. Higuchi, Degradation of lignin by S. pulverulentum and other white rot fungi in lignin biodegradation microbiology and potential applications, 2014.

D. Kocaefe, R. Younsi, S. Poncsak, K. , and Y. , Comparison of different models for the high-temperature heat-treatment of wood, Int. J. Therm. Sci, vol.46, pp.707-716, 2007.

D. Kocaefe, S. Poncsak, J. Tang, and M. Bouazara, Effect of heat treatment on the mechanical properties of North American jack pine: thermogravimetric study, J. Mater. Sci, vol.45, p.681, 2010.

F. Kollmann and A. Schneider, On the sorption behaviour of heat stabilized wood. Holz als Roh-und Werkstoff, vol.21, pp.77-85, 1963.

S. Korkut and S. Hiziroglu, Effect of heat treatment on mechanical properties of hazelnut wood, Corylus colurna L.). Mater. Des, vol.30, pp.1853-1858, 2009.

S. Korkut, M. Akgül, and T. Dündar, The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood, Bioresour. Technol, vol.99, pp.1861-1868, 2008.

R. Kotilanen, Chemical changes in wood during heating at 150-260 ° C, p.51, 2000.

A. Krause, D. Jones, M. Van-der-zee, and H. Militz, Interlace treatment wood modification with N-methylol compounds, Proceedings of the first European conference on wood modification, pp.317-327, 2003.

M. Kutnik, Évolution, génétique et structure coloniale du termite souterrain Reticulitermes grassei (Clément) (Tours), 2004.

S. Lande, M. Eikenes, and M. Westin, Chemistry and ecotoxicology of furfurylated wood a, Scand. J. For. Res, vol.19, pp.14-21, 2004.

S. Lande, M. Westin, and M. Schneider, Properties of furfurylated wood, Scand. J. For. Resour, vol.19, pp.22-30, 2004.

A. Leclercq, Relations entre la structure anatomique du bois de hêtre (Fagus sylvatica L.) et ses propriétés physiques et mécaniques, Bulletin de Recherches Agronomiques de Gembloux, vol.16, pp.3-26, 1981.

S. Lekounougou, M. Pétrissans, J. P. Jacquot, E. Gelhaye, G. et al., Effect of heat treatment on extracellular enzymatic activities involved in beech wood degradation by Trametes versicolor, Wood Sci. Technol, vol.43, pp.331-341, 2009.

L. Leniaud, F. Dedeine, A. Pichon, S. Dupont, and A. G. Bagnères, Geographical distribution, genetic diversity and social organization of a new European termite, Reticulitermes urbis (Isoptera: Rhinotermitidae), Biol Invasions, vol.12, pp.1389-1402, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00550454

J. D. Lloyd, Borates and their biological applications, Doc IRG/WP, pp.98-30178, 1998.

J. Lloyd, D. J. Dickinson, M. , and R. , The Probable Mechanisms of action of boric acid and borates as wood preservatives, Int. Res. Group on Wood Preservation, 1990.

A. Luchetti, M. Marini, and B. Mantovani, Filling the European gap: biosystematics of the eusocial system Reticulitermes (Isoptera, Rhinotermitidae) in the Balkanic Peninsula and Aegean area, Molecular phylogenetics and evolution, vol.45, pp.377-383, 2007.

F. Lyon, Amélioration de la durée de vie d'essences de bois peu durables à l'aide d'un traitement combiné boates/huiles végétales. Theses, 2007.

F. Lyon, A. Pizzi, Y. Imamura, M. F. Thevenon, S. N. Kartal et al., , 2007.

, Leachability and termite resistance of wood treated with a new preservative: ammonium borate oleate, Holz Als Roh-Werkst, vol.65, pp.359-366

F. Lyon, M. F. Thevenon, W. J. Hwang, Y. Imamura, J. Gril et al., Effect of an oil heat treatment on the teachability and biological resistance of boric acid impregnated wood, Ann. For. Sci, vol.64, pp.673-678, 2007.

B. Mazela, I. Ratajczak, and M. Bartkowiak, Reduction of preservatives leaching from wood by the application of animal proteins, 2005.

F. Mburu, S. Dumarçay, F. Huber, M. Petrissans, G. et al., Evaluation of thermally modified Grevillea robusta heartwood as an alternative to shortage of wood resource in Kenya: Characterisation of physicochemical properties and improvement of bioresistance, Bioresour. Technol, vol.98, pp.3478-3486, 2007.

R. Mehrotra, P. Singh, and H. Kandpal, Near infrared spectroscopic investigation of the thermal degradation of wood, Thermochim. Acta, vol.507, pp.60-65, 2010.

H. Militz, Thermal treatment of wood. European processes and their background, Int. Reserch Group Wood Prot. IRG/WP, pp.2-40241, 2002.

A. Mohareb, J. Van-acker, and M. Stevens, Effect of protective additives on leachability and efficacy of borate treated wood, Int. Res. GROUP WOOD Preserv, p.15, 2002.

A. Mohareb, J. Van-acker, and M. Stevens, Leachability and efficacy of fatty acid derived boron esters as wood preservatives, pp.4-30351, 2004.

A. Mohareb, M. F. Thévenon, E. Wozniak, G. , and P. , Effects of monoglycerides on leachability and efficacy of boron wood preservatives against decay and termites, Int. Biodeterior. Biodegrad, vol.64, pp.135-138, 2010.

A. Mohareb, M. F. Thévenon, E. Wozniak, G. , and P. , Effects of polyvinyl alcohol on leachability and efficacy of boron wood preservatives against fungal decay and termite attack, Wood Sci. Technol, vol.45, pp.407-417, 2010.

A. Mohareb, P. Sirmah, M. Pétrissans, G. , and P. , Effect of heat treatment intensity on wood chemical composition and decay durability of Pinus patula, Eur. J. Wood Wood Prod, vol.70, pp.519-524, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02064922

I. Momohara, W. Ohmura, H. Kato, and Y. Kubojima, Effect of High-Temperature Treatment on Wood Durability against the Brown-rot Fungus, Fomitopsis palustris, and the Termite, Coptotermes formosanus. 8 Th Int. IUFRO Wood Dry, pp.284-287, 2003.

S. Mouras, P. Girard, P. Rousset, P. Permadi, D. Dirol et al., Propriétés physiques de bois peu durables soumis à un traitement de pyrolyse ménagéePhysical properties of non durable woods with a low temperature pyrolysis treatment, Ann. For. Sci, vol.59, p.10, 2002.

R. Murphy, D. Dickinson, P. Turner, P. Wickens, H. et al., Vapor boron treatment of wood composites, International Union of Forestry Research Organization (IUFRO) Symposium on the Protection of Wood-based Composite Products, pp.49-56, 1993.

T. Nakano and J. Miyazaki, Surface Fractal Dimensionality and Hygroscopicity for Heated Wood, Holzforschung, vol.57, pp.289-294, 2003.

D. Nicholas, A. Kadir, A. Williams, P. , and A. , Water repellency of wood treated with alkylammonium compounds and chromated copper arsenate, Int. Res. Group Wood Preserv. Doc No, vol.30231, 2000.

L. Nunes, T. Nobre, and A. O. Rapp, Thermally modified wood in choice tests with subterranean. COST E37 Reinbeck, 2004.

M. Nuopponen, T. Vuorinen, S. Jämsä, and P. Viitaniemi, Thermal Modifications in Softwood Studied by FT-IR and UV Resonance Raman Spectroscopies, J. Wood Chem. Technol, vol.24, pp.13-26, 2005.

N. Yilgör and S. N. Kartal, Heat Modification of Wood: Chemical Properties and resistance to mold and decay fungi, Forest products journal, vol.60, pp.357-361, 2010.

D. N. Obanda, T. F. Shupe, and H. M. Barnes, Reducing leaching of boron-based wood preservatives-A review of research, Bioresour. Technol, vol.99, pp.7312-7322, 2008.

F. Obounou-akong, P. Gérardin, M. F. Thévenon, and C. Gérardin-charbonnier, , 2015.

, Hydrogel-based boron salt formulations for wood preservation, Wood Sci. Technol, vol.49, pp.443-456

J. V. Oliver-villanueva, P. Gascón-garrido, D. Sales-ibiza-palacios, and M. , Evaluation of thermally-treated wood of beech (Fagus sylvatica L.) and ash (Fraxinus excelsior L.) against Mediterranean termites (Reticulitermes spp.), Eur. J. Wood Wood Prod, vol.71, pp.391-393, 2013.

S. K. Ozaki, M. K. Yalinlilic, Y. Imamura, and M. F. Souza, Effect of boron compounds-furfuryl alcohol treatment of wood on dimensional stability, termite resistance and boron leachability, pp.1-40195, 2001.

A. N. Papadopoulos and C. A. Hill, The biological effectiveness of wood modified with linear chain carboxylic acid anhydrides against Coniophora puteana, Holz Als RohWerkst, vol.60, pp.329-332, 2002.

L. Pascale, Bois dégradation par des tremites

J. Peters, K. Fischer, and S. Fischer, Characterization of emissions from thermally modified wood and their reduction by chemical treatment, BioResources, vol.3, pp.491-502, 2008.

J. Peters, A. Pfriem, M. Horbens, S. Fischer, and A. Wagenführ, Emissions from thermally modified beech wood, their reduction by solvent extraction and fungicidal effect of the organic solvent extracts, Wood Mater. Sci. Eng, vol.4, pp.61-66, 2009.

M. Pétrissans, P. Gérardin, I. E. Bakali, and M. Serraj, Wettability of heat-treated wood, Holzforschung, vol.57, pp.301-307, 2005.

A. Pfeffer, A. Dieste, C. Mai, and H. Militz, Effects of water glass and DMDHEU treatment on the colonisation of wood by Aureobasidium pullulans, Eur. J. Wood Wood Prod, vol.69, pp.303-309, 2011.

O. Pignolet, Optimisation de la durabilité de bois d'oeuvre (classe d'emploi 4) à l'aide d'anhydrides alkényles succiniques d'origine végétale, 2008.

S. Poncsak, D. Kocaefe, F. Simard, P. , and A. , Evolution of extractive composition during thermal treatment of Jack pine, J. Wood Chem. Technol, vol.29, pp.251-264, 2009.

M. V. Ramiah, Thermogravimetric and differential thermal analysis of cellulose, hemicellulose, and lignin, J. Appl. Polym. Sci, vol.14, pp.1323-1337, 1970.

I. Ratajczak and B. Mazela, The boron fixation to the cellulose, lignin and wood matrix through its reaction with protein, Holz Als Roh-Werkst, vol.65, pp.231-237, 2007.

M. Rayzal, Préservation du bois: guide d'emploi des normes, 2002.

V. Repellin, Optimisation des paramètres durée et température d'un traitement thermique du bois. Modifications des propriétés d'usage du bois en relation avec les modifications physico-chimiques et ultrastructurales occasionnées par le traitement thermique. Thesis, 2006.

V. Repellin, G. , and R. , Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition, Holzforschung, vol.59, pp.28-34, 2005.

R. Ringman, A. Pilgård, C. Brischke, and K. Richter, Mode of action of brown rot decay resistance in modified wood: a review, Holzforschung, vol.68, pp.239-246, 2014.

R. Ripa and L. Castro, Presencia de la termita subterranea Reticulitermes santonensis de Feytaud (Isoptera: Rhinotermitidae) en la comuna de Quillota, 2000.

E. Roffael and K. Schaller, The influence of thermal treatment on cellulose, Holz Als Roh-Werkst, vol.29, pp.275-278, 1971.

C. Roussel, V. Marchetti, A. Lemor, E. Wozniak, B. Loubinoux et al., Chemical modification of wood by polyglycerol/maleic anhydride treatment, Holzforschung, vol.55, pp.57-62, 2001.

R. M. Rowell, Chemical modification of wood: A short review, Wood Mater. Sci. Eng, vol.1, pp.29-33, 2006.

R. M. Rowell, Handbook of Wood Chemistry and Wood Composites, 2005.

,. Saha-tchinda, Caractérisation et valorisation des substances extractibles de cinq essences camerounaises majeures de l'industrie du bois : Ayous, Moabi, Movingui, 2015.

M. Sailer, A. O. Rapp, and H. Leithoff, Improved resistance of Scots pine and spruce by application of an oil-heat treatment, International Research Group Wood Pre, pp.0-40162, 2000.

S. Salman, A. Pétrissans, M. F. Thévenon, S. Dumarçay, D. Perrin et al., Development of new wood treatments combining boron impregnation and thermo modification: Effect of additives on boron leachability, vol.72, pp.355-365, 2014.

S. Salman, A. Pétrissans, M. F. Thévenon, S. Dumarçay, and P. Gérardin, Decay and termite resistance of pine blocks impregnated with different additives and subjected to heat treatment, European Journal of Wood and Wood Products, vol.74, pp.37-42, 2016.

T. P. Schultz, N. , and D. D. , Development of environmentally-benign wood preservatives based on the combination of organic biocides with antioxidants and metal chelators, Phytochemistry, vol.61, pp.555-560, 2002.

J. L. Shi, D. Kocaefe, T. Amburgey, and J. Zhang, A comparative study on brownrot fungus decay and subterranean termite resistance of thermally-modified and ACQ-Ctreated wood, Holz Als Roh-Werkst, vol.65, pp.353-358, 2007.

J. Simonsen, C. M. Freitag, A. Silva, and J. J. Morrell, Wood/plastic ratio: Effect on performance of borate biocides against a brown rot fungus, Holzforschung, vol.58, pp.205-208, 2005.

H. Simsek, E. Baysal, and H. Peker, Some mechanical properties and decay resistance of wood impregnated with environmentally-friendly borates, Constr. Build. Mater, vol.24, pp.2279-2284, 2010.

A. P. Singh and J. A. Butcher, Bacterial degradation of wood cell walls: a review of degradation patterns, J. Inst. Wood Sci, vol.12, pp.143-157, 1991.

H. Sivonen, S. L. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic resonance studies of thermally modified wood, Holzforschung, vol.56, pp.648-654, 2005.

H. Sivrikaya, A. Can, T. De-troya, and M. Conde, Comparative biological resistance of differently thermal modified wood species against decay fungi, Reticulitermes grassei and Hylotrupes bajulus, Maderas Cienc. Tecnol, vol.17, pp.559-570, 2015.

P. Soulounganga, B. Loubinoux, E. Wozniak, A. Lemor, G. et al., Improvement of wood properties by impregnation with polyglycerol methacrylate, Holz Als Roh-Werkst, vol.62, pp.281-285, 2004.

T. Surini, F. Charrier, J. Malvestio, B. Charrier, A. Moubarik et al., Physical properties and termite durability of maritime pine Pinus pinaster Ait., heattreated under vacuum pressure, Wood Sci. Technol, vol.46, pp.487-501, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00747658

M. F. Thevenon, A. Pizzi, and J. P. Haluk, Non-toxic albumin and soja protein borates as ground-contact wood preservatives, Holz Als Roh-Werkst, vol.55, pp.293-296, 1997.

M. F. Thévenon, A. Pizzi, and J. P. Haluk, One-step tannin fixation of non-toxic protein borates wood preservatives, vol.56, pp.90-90, 1998.

M. F. Thévenon, Développement de formulations de produites de préservation de bois de faible toxicité et à longue durée d'action. Applications aux associations acide boriquetannins condensés et aux associations acide borique-protéines, 1999.

M. F. Thévenon, A. Pizzi, and J. P. Haluk, Potentialities of protein borates as low toxic, long term wood preservatives, pp.99-30212, 1999.

M. F. Thevenon, P. , and A. , Polyborate ions' influence on the durability of wood treated with non-toxic protein borate preservatives, Holz Als Roh-Werkst, vol.61, pp.457-464, 2003.

M. F. Thevenon, G. Tondi, P. , and A. , High performance tannin resin-boron wood preservatives for outdoor end-uses, Eur. J. Wood Wood Prod, vol.67, pp.89-93, 2008.

M. F. Thevenon, A. Pizzi, and J. P. Haluk, Protein borates as non-toxic, long-term, wide-spectrum, ground-contact wood preservatives, Holzforsch. Int. J. Biol. Chem. Phys. Technol. Wood, vol.52, pp.241-248, 2009.

M. F. Thévenon, G. Tondi, P. , and A. , Friendly wood preservative system based on polymerized tannin resin-boric acid for outdoor applications, Maderas. Ciencia y tecnología, vol.12, pp.253-257, 2010.

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Characterisation of thermally modified wood: molecular reasons for wood performance improvement, Holz Als Roh-Werkst, vol.56, pp.149-153, 1998.

B. F. Tjeerdsma, M. Stevens, and H. Militz, Durability aspects of hydrothermal treated wood, 2000.

B. F. Tjeerdsma and H. Militz, Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood, Holz Als Roh-Werkst, vol.63, pp.102-111, 2005.

N. V. Todorovic, Z. Popovi?, G. Mili?, P. , and R. , Estimation of heat-treated beechwood properties by color change, BioResources, vol.7, pp.799-0815, 2012.

E. D. Tomak, M. Hughes, U. C. Yildiz, and H. Viitanen, The combined effects of boron and oil heat treatment on beech and Scots pine wood properties. Part 1: Boron leaching, thermogravimetric analysis, and chemical composition, J. Mater. Sci, vol.46, pp.598-607, 2011.

G. Tondi, S. Wieland, N. Lemenager, A. Petutschnigg, A. Pizzi et al., Efficacy of tannin in fixation boron in wood, BioResources, vol.7, pp.1238-1252, 2012.

A. Treu, A. Pilgard, S. Puttman, A. Krause, and M. Westin, Material properties of furfurylated wood for window production. The International Research Group on Wood Protection, pp.9-40480, 2009.

K. Tsunoda, Preservative properties of vapor-boron-treated wood and wood-based composites, J. Wood Sci, vol.47, pp.149-153, 2001.

M. Verma, S. Sharma, P. , and R. , Biological alternatives for termite control: A review, Int. Biodeterior. Biodegrad, vol.63, pp.959-972, 2009.

M. Vernois, Heat treatment of wood in France-state of the art. Cent. Tech. Bois L'Ameublement Paris Fr, 2001.

P. Viitaniemi, S. Jämsä, and H. Viitanen, Method for improving biodegradation resistance and dimensional stability of cellulosic products, vol.5678324, p.5678324, 1997.

P. M. Visakh, T. , and S. , Preparation of bionanomaterials and their polymer nanocomposites from waste and biomass, Waste Biomass Valorization, vol.1, pp.121-134, 2010.

J. Weiland, G. , and R. , Physicochemical study of a thermal treatment of wood, 2001.

, Récents Progrès en Genie des Procèdes, vol.15, pp.195-202

B. Welzbacher, C. Brischke, and A. Rapp, Influence of treatment temperature and duration on selected biological, mechanical, physical and optical properties of thermally modifies timber. Wood material science and engineering, vol.2, pp.66-76, 2007.

L. H. Williams, Borate Wood-Protection Compounds: A Review of Research and Commercial Use, APT Bull, vol.27, pp.46-51, 1996.

L. H. Williams, Laboratory and field testing of borates used as pesticides. Second Int. Conf. on wood protection with diffusible preservatives and pesticides, Proceedings No. 7284, pp.14-19, 1997.

E. Windeisen, C. Strobel, and G. Wegener, Chemical changes during the production of thermo-treated beech wood, Wood Sci. Technol, vol.41, pp.523-536, 2007.

E. Windeisen and G. Wegener, Chemical characterization and comparison of thermally treated beech and ash Wood, In.Mater. Sci. Forum, vol.599, pp.143-158, 2009.

Q. Wu, S. Lee, and J. P. Jones, Decay and mold resistance of borate modified oriented strandboard, Proceedings of the 34th Annual Conference for the International Research Group on Wood Preservation, pp.18-23, 2003.

M. K. Yalinkilic, E. D. Gezer, M. Takahashi, Z. Demirci, R. Ilhan et al., , 1999.

, Boron addition to non-or low-formaldehyde cross-linking reagents to enhance biological resistance and dimensional stability of wood, Holz Als Roh-Werkst, vol.57, pp.351-357

H. Yamaguchi, Silicic acid: boric acid complexes as wood preservatives, Wood Sci. Technol, vol.37, pp.287-297, 2003.

O. Yemi? and G. Mazza, Acid-catalyzed conversion of xylose, xylan and straw into furfural by microwave-assisted reaction, Bioresour. Technol, vol.102, pp.7371-7378, 2011.

S. Yildiz, Effects of heat treatment on water repellence and anti-swelling efficiency of beech wood, International Research Group Wood Pre, pp.2-40223, 2002.

S. Yildiz, E. D. Gezer, Y. , and U. C. , Mechanical and chemical behavior of spruce wood modified by heat, Build. Environ, vol.41, pp.1762-1766, 2006.

A. Zaman, R. Alen, and R. Kotilainen, Heat behavior of Pinus sylvestris and Betula pendula at 200-230 °C, Wood Fiber Sci, vol.32, pp.138-143, 2000.