A. Hibbitt, K. , S. Inc, . Abr72, and F. Abrassart, Influence des transformations martensitiques sur les propriétés mécaniques des alliages du système Fe-Ni-Cr-C, Thèse de doctorat ès-Sciences Physiques, 1972.

]. And05 and . R. Andersson, Deformation characteristics of stainless steels, 2005, doctoral thesis, division of manufacturing systems engineering

A. Ang54 and T. , Formation of martensite in austenitic stainless steels, J. of the Iron and Steel Inst, vol.177, pp.154-174, 1954.

. [. Oden-m and . Magnusson-c, A new equation to describe the microstructural transformation of meta-stable austenitic stainless steels during plastic deformation, submitted for publication in journal international journal of plasticity, 2005.

F. Azz00-]-azzouz, G. Cailletaud, T. Antretter, F. D. Fischer, and K. Tanaka, Transformation induced plasticity (TRIP) in steels subjected to nonmonotonic loading paths ? experiments and theory, Proceedings Plasticity, pp.175-177, 2000.

A. , F. Cailletaud, G. Fischer, F. D. Pineau, A. Tanaka et al., Back stress development during the austenite ? martensite transformation, Proceedings ZAMM, pp.185-188, 2000.

. [. Berveiller-s, . Inal-k, and . Patoor-e, Caractérisation de la transformation martensitique dans l'acier austénitique 301LN, 17 ème Congrès Français de Mécanique, septembre, 2005.

N. [. Hashimoto and K. Farrell, Temperature dependence of strain hardening and plastic instability behaviours in austenitic stainless steels, Acta Materialia, vol.52, pp.3889-3899, 2004.

[. Makkouk-r, S. J. , M. M. , and F. G. , Experimental and numerical analysis of the formability of TRIP steels, Comportement mécanique et stabilité microstructurale d'un acier inoxydable austénitique type AISI 316LN sous forte plasticité monotone et cyclique à 77K et 300K Thèse de doctorat, 1997.

H. Bargui, H. Sidhom, and Z. Tourki, Martensite induite :, Mat??riaux & Techniques, vol.88, issue.11-12, pp.11-12, 2000.
DOI : 10.1051/mattech/200088110031

]. Bum99 and F. Bumbieler, Mise en évidence de l'effet TRIP sur un acier Fe-0,2C-1,5Mn- 1,5Si ? comparaison avec un modèle micromécanique, Thèse de doctorat, 1999.

. A. Bhattacharyya and . J. Weng-g, An energy criterion for the stress-induced martensitic transformation in a ductile system, Journal of the Mechanics and Physics of Solids, vol.42, issue.11, pp.42-1699, 1994.
DOI : 10.1016/0022-5096(94)90068-X

[. , M. Berveiller, M. Lemoine, and X. , Couplings between plasticity and martensitic phase transformation : overall behavior of polycrystalline TRIP steels

[. , M. Berveiller, M. Sabar, and H. , Micromechanical modelling of martensitic transformation induced plasticity (TRIP)

S. [. Soulami-a and K. M. , From micro to macroscopic description of martensitic transformation in steels : a viscoplastic model, Philosophical Magazine, 2006.

L. Delaey, Diffusionless Transformations, Phase transformations in materials, p.339, 1991.

A. D. Demania, The influence of martensite transformation on the formability of 304 stainless steel sheet, 1995.

]. Des81 and . Y. Desalos, Comportement dilatométrique et mécanique de l'austénite métastable d'un acier A 533, IRSID, p.28, 1981.

D. J. Parks-d, Effects of strain state on the kinetics of strain-induced martensite in steels, Journal of the Mechanics and Physics of Solids, vol.46, pp.1613-1635, 1998.

. [. Sabar-h and . Berveiller-m, Micromechanical modelling of the transformation induced plasticity (TRIP) phenomen in steels, Int. J. Engng Sci, pp.33-1921, 1995.

J. D. Esh57-]-eshelby, The determination of the elastic field of an ellipsoidal inclusion and related problem, Proc. Roy. Soc, pp.241-376, 1957.

]. Est98 and . Y. Estrin, Dislocation theory based constitutive modelling: foundations and applications, Journal of the materials processing technology, pp.80-81, 1998.

]. Fer81 and . G. Ferron, Influence of heat generation and conduction on plastic stability under uniaxial tension, Materials Science and Engineering, vol.49, pp.241-248, 1981.

. Fis97 and F. D. Fischer, Modelling and simulation of transformation induced plasticity in elastoplastic materials, Mechanics of solids with phase changes, pp.189-237, 1997.

S. Fra72-]-franitza, Zur Berechnung der Wärme und Umwandlunspannungen in langen Kreiszylindern, 1972.

Q. Fur03-]-furnemont, The micromechanics of TRIP-assisted multiphase steels, Thèse de Doctorat, 2003.

]. Gau85 and E. Gautier, Transformation perlitique et martensitique sous contrainte de traction dans les aciers, Thèse d'Etat, INPL, 1985.

[. Greenwood, G. W. Johnson, and R. H. , The Deformation of Metals Under Small Stresses During Phase Transformations, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.283, issue.1394, pp.283-403, 1965.
DOI : 10.1098/rspa.1965.0029

[. S. , M. P. , T. S. , P. P. Et, and L. G. , Identification de modèles de comportement pour l'emboutissage d'aciers inoxydables, Matériaux et Techniques, pp.3-43, 2004.

]. Gmtpl04b, M. S. Gallee, T. S. , P. P. Et, and L. G. , Development of a two-phase model for the deep-drawing of austenitic stainless steel, In : Proceedings of Esaform, pp.199-202, 2004.

[. , J. R. De-oliveira, and F. F. , Work hardening and martensitic transformation in Fe-27%Ni-0, 23%C at 263K. Scripta Metall. A, pp.537-542, 1979.

G. N. Petit-b and H. M. , Electron Backscattered Diffraction Study of

G. K. Sehitoglu-h, The role of texture in Tension/Compression assymetry in Polycrystalline NiTi, Int. J. of Plasticity, vol.15, pp.69-92, 1999.

]. Hec77 and . S. Hecker-s, Experimental studies of sheet stretchability, in: Formability proceedings, 1977.

[. Hansel, A. H. , H. , P. Reissner, and J. , Description of strain induced martensitic phase transformation in metastable austenitic steels for the simulation of deep drawing processes at non isothermal conditions, Procedings IDDRG, 1998.

[. , S. S. Stout, M. G. Staudhammer, K. P. Smith, and J. L. , Effects of strain state and strain rate on deformation induced transformation in 304 stainless steel: Part I et Part II, Met. Trans. A, pp.13-619, 1982.

[. , T. Drillet, J. Couturier, A. Olier, and C. , Detailed study of the transformation mechanisms in ferrous TRIP aided steels. Int. Conf. on TRIP-aided high strength ferrous alloys, pp.31-37, 2002.

]. Kee65, . P. Keeler-s, G. V. Kurdjumov, and E. Z. Kaminskii, Determination of Forming Limits in Automotive Stampings, Sheet Metal Indust, Zh. Prikl. Fiz, vol.42, issue.2, pp.683-691, 1929.

[. D. Key-s, Implementation of a Time Independent Plasticity Theory into Structural Computer Programs, Constitutive Equations in Viscoplasticity : Computational and Engineering Aspects, ASME, pp.20-125, 1976.

. [. Marburger-r, A general equation prescribing extent of austenite-martensite transformation in pure Fe-C alloys and plain carbon steels, Acta Metall, vol.7, pp.59-60, 1959.

. [. Mecking-h, Physics and phenomenology of strain hardening, Progress in materials science, pp.48-171, 2003.

]. Koc76 and . F. Kocks-u, Laws for work-hardening and low-temperature creep, J. Eng. Mater. Technol, vol.98, pp.76-85, 1976.

R. A. Kanni and . A. Padmanabhan-k, Prediction of the formability of metastable low nickel austenitic stainless steel sheets, Journal of Materials Processing Technology, vol.94, issue.2-3, pp.94-201, 1999.
DOI : 10.1016/S0924-0136(99)00106-5

]. Kub04 and . R. Kubler, Comportement thermomécanique des aciers à effet TRIP : approches micromécaniques et phénoménologiques ? applications à la mise en forme, 2004.

. Leb89 and J. Leblond, Mathematical modelling of transformation plasticity in steels II : coupling with strain hardening phenomena, Int. J. Plast, vol.5, pp.573-591, 1989.

L. J. Mottet-g and D. J. , A theoretical and numerical approach to the plastic behaviour of steels during phase transformations, Journal Mechanical Physics Solids, pp.34-38, 1986.

[. Leblond, J. B. Devaux, J. Devaux, and J. C. , Mathematical modelling of transformation plasticity in steels I: Case of ideal-plastic phases, International Journal of Plasticity, vol.5, issue.6, pp.551-572, 1989.
DOI : 10.1016/0749-6419(89)90001-6

V. I. Lev98-]-levitas, Thermomechanical theory of martensitic phase transformations in inelastic materials, International Journal of Solids and Structures, vol.35, issue.9-10, pp.9-10, 1998.
DOI : 10.1016/S0020-7683(97)00089-9

[. , F. Furnemont, Q. Jacques, P. J. Delannay, F. Pardoen et al., Micromechanical modeling of plastic anisotropy and strain induced phase transformation in dual-elastoplastic phase materials, Proceedings EMMC6, pp.169-177, 2002.

. [. Kosarchuk-v, Influence of phase transformations on the mechanical properties of austenitic stainless steels, International Journal of Plasticity, vol.16, pp.749-767, 2000.

. Mak90 and T. Maki, Microstructure and mechanical behavior of ferrous martensite, Materials Science Forum, pp.56-58, 1990.

]. Man04 and . Y. Manach-p, Lois de comportement et mise en forme des matériaux métalliques, Habilitation à Diriger des Recherches, 2004.

. [. Bourgeois-n, . Martiny-m, S. J. Teaca-m, and . Ferron-g, Experimental and numerical analysis of the Forming Limit Diagram of type 304L austenitic stainless steel, pp.23-25, 2006.

. [. Fischer-f, A mesoscale study on the thermodynamic effect of stress on martensitic transformation, Metallurgical and materials Transactions A, pp.26-267, 1995.

K. [. Kuczinski, Limit strains in the process of stretch-forming sheet metals, Int. J. Mech. Sci, vol.9, pp.609-620, 1967.

D. [. Mcdowell, The effect of stress state on the large strain inelastic deformation behaviour of 304L stainless steel, Journal of Engineering Materials and Technology, vol.118, p.28, 1996.

]. Mm96b, . P. Miller-m, and D. L. Mcdowell, Modelling large strain multiaxial effects in FCC polycrystals, International Journal of Plasticity, issue.7, pp.12-875, 1996.

M. [. Baldoukas-a, Simulation of Sheet Metal Forming Using Explicit Finite-Element Techniques : Effect of Material and Forming Characteristics, J. of Materials Processing Technology, pp.72-120, 1997.

[. Mori, T. Tanaka, and K. , Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, vol.21, issue.5, pp.571-579, 1973.
DOI : 10.1016/0001-6160(73)90064-3

]. Nes97 and . E. Nes, Modelling of work hardening and stress saturation in FCC metals, Progress in materials science, pp.129-193, 1997.

]. Noh76, . K. Nohara, and . Int, Symposium on « new aspects of martensitic transformations », Japon Institute of Metals, 1976.

. [. Ono-y and . Ohashi-n, Composition and grain size dependencies of strain-induced martensitic transformation in metastable austenitic stainless steel, J

[. B. Olson-g and . Azrin-m, Stress-assisted isothermal martensitic transformation: Application to TRIP steels, Metallurgical Transactions A, vol.11, issue.11, pp.1907-1914, 1992.
DOI : 10.1007/BF02672301

[. Onink, M. Brakman, C. M. Tichelaar, F. D. Mittemeijer, E. J. Van-der-zwaag et al., The lattice parameters of austenite and ferrite in Fe???C alloys as functions of carbon concentration and temperature, Scripta Metallurgica et Materialia, vol.29, issue.8, pp.1011-1023, 1993.
DOI : 10.1016/0956-716X(93)90169-S

[. Olson, G. B. Cohen, and M. , Kinetics of strain-induced martensitic nucleation, Metallurgical Transactions A, vol.55, issue.4, pp.791-795, 1975.
DOI : 10.1007/BF02642042

[. Olson, G. B. Cohen, and M. , Stress-assisted isothermal martensitic transformation: Application to TRIP steels, Metallurgical Transactions A, vol.11, issue.11, pp.13-1907, 1982.
DOI : 10.1007/BF02672301

O. G. Et, C. M. Sd-antolovich, R. Ritchie, and W. Gerberich-eds, Mechanical properties and phase transformation in engineering materials, p.367, 1986.

[. Perlade, A. Bouaziz, O. Furnemont, and Q. , A physically based model for TRIP-aided carbon steels behaviour, Materials Science and Engineering: A, vol.356, issue.1-2, pp.1-2, 2003.
DOI : 10.1016/S0921-5093(03)00121-7

[. Patel, J. R. Cohen, and M. , Criterion for the action of applied stress in the martensitic transformation, Acta Metallurgica, vol.1, issue.5, pp.531-538, 1953.
DOI : 10.1016/0001-6160(53)90083-2

]. Pes02 and . L. Pessanha, Etude numérique de l'influence du modèle de plasticité sur le comportement des tôles lors de l'emboutissage, 2002.

[. , V. C. Callabresi, M. L. Lathrop, J. F. Ramaswamy, G. S. Lusk et al., Simulating distortion and residual stresses in carburized thin strips, J

P. B. Gey-n, H. M. Bolle-b, C. M. Pic78, and F. P. Pickering, Deformation Behavior and Microstructure/Texture Evolution of an Annealed 304 AISI Stainless steel Experimental and Micromechanical Modeling, Journal of Plasticity Apl. Sci. Phys, 1978.

]. Pic84 and . B. Pickering-f, Physical metallurgical development of stainless steels, Proc. Of the Conf. Stainless Steels, pp.2-28, 1984.

]. Pil88 and . P. Pilvin, Identification des paramètres de modèles de comportement

]. Pil03 and . P. Pilvin, Notice d'utilisation du logiciel Sidolo version 2, 2003.

]. Pri94 and . A. Prior, Applications of Implicit and Explicit Finite Element Techniques to Metal Forming, Proceedings of the 5 th International Conference in Metal Forming, pp.649-656, 1994.

[. , I. Y. Savrai, R. A. De-cooman, and B. C. , Effect of stress state on the transformation behaviour and mechanical properties of TRIP aided automotive steels, Int. Conf. on TRIP-aided high strength ferrous alloys, pp.79-84, 2002.

K. [. Gadaj-p and N. W. , Analyse thermographique de l'élévation de temperature dans un acier TRIP 800 au cours de la déformation plastique, Matériaux & Techniques, pp.5-6, 2004.

R. N. , N. J. , and T. L. Passmann-r, Comparison of Implicit and Explicit Finite Element Methods in the Simulation of Metal Forming Processes, Proceedings of the Numiform'92, pp.99-108, 1992.

. [. Sulonen-m, 12 e Biennal congress of IDDRG proceeding, Italie, p.119, 1988.

. Sc54 and C. J. Stokes-r, Work softening in aluminium crystals, Acta metallurgica, pp.341-342, 1954.

]. Sch32 and . E. Scheil, Transformation of austenite into martensite in Iron-Nickel alloys under stress, Z. anorg. Allgen. Chem, pp.207-228, 1932.

S. J. Martiny-m and . Ferron-g, Finite element analysis of the effects of martesnitic phase transformation in TRIP steel sheet forming, International Journal of Mechanical Sciences, pp.47-884, 2005.

S. J. Martiny-m and . Ferron-g, A numerical analysis of the formability of unstable austenitic steels, Journal of Materials Processing Technology, pp.164-165, 2005.

O. [. Parks-d, A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels, Acta Metall. et Mat, vol.40, pp.1703-1716, 1992.

]. Sum78 and . H. Sumitomo, Earing and delayed cracking of deep drawn cup of austenitic stainless steel sheets Advanced Technology of Plasticity, pp.1289-1297, 1978.

T. G. Tay34, The mechanism of plastic deformations of crystals, Proceedings of the Royal Society London, pp.362-415, 1934.

. [. Bargui-h and . Sidhom-h, The Kinetics of induced martensitic formation an dits effect on forming limit curves in the AISI 304 stainless steel, Journal of Materials Processing Technology, vol.166, pp.330-336, 2005.

A. E. Tekkaya, State-of-the-art of simulation of sheet metal forming, Journal of Materials Processing Technology, vol.103, issue.1, pp.14-22, 2000.
DOI : 10.1016/S0924-0136(00)00413-1

[. Mguil, Une technique de corrélation directe d'images numériques : application à la détermination de courbes limite de formage et proposition d'un critère de striction, 1997.

[. Tanaka, K. Sato, and Y. , Eine mechanische Theorie ???ber die umwandlungsinduzierte Plastizit???t, Ingenieur-Archiv, vol.32, issue.2
DOI : 10.1007/BF00536831

. [. Shibutani-y, Estimation of deformation behaviour of TRIP steels_ smooth/ringed-notched specimens under monotonic and cyclic loading, Int . J. of Plasticity, vol.16, pp.769-789, 2000.

[. Videau, J. C. Cailletaud, G. Pineau, and A. , Mod??lisation des effets m??caniques des transformations de phases pour le calcul de structures, Le Journal de Physique IV, vol.04, issue.C3, pp.227-232, 1994.
DOI : 10.1051/jp4:1994331

V. P. Dumoulin-s and A. R. , Determination of the forming limit diagram from local strain measurement using digital image analysis, Int. J. Forming Processes, vol.2, pp.395-408, 1999.

[. Vintaikin, E. Z. Nosova, and G. I. , On the 95 th birthday of G, V. Kurdyumov, Metal Science and Heat Treatment, vol.39, pp.1-2, 1997.

W. Q. Cheng-s, R. K. , and M. E. , Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals, Materials Science and Engineering A, pp.381-71, 2004.

R. [. De-bonte-m, W. M. Lieberman, D. S. Read, and T. A. , A thermodynamic analysis of the stress induced martensitic transformation in a single crystal On the theory of the formation of martensite, Z. Metallkd Journal of metals, vol.70, pp.113-1503, 1953.

[. Wang, J. Van-der-zwaag, and S. , Stabilization of retained austenite in transformation induced plasticity, Met. Mat. Trans. A, pp.32-1527, 2001.

. Zha93 and J. Zhang, Influence de la contrainte sur la transformation martensitique d'alliages Fe-Ni-C, Thèse de doctorat, INPL, 1993.