]. J. Batoz-90b, G. Batoz, and . Dhatt, Modélisation des structures par éléments finis, 1990.

J. L. Batoz and G. Dhatt, Modélisation des structures par éléments finis, Coques, 1992.

J. L. Batoz and Y. Q. Guo, Analysis and design of sheet forming parts using a simplified inverse approach, 5th International Conference on Computational Plasticity, pp.17-20, 1997.

J. L. Batoz, F. Hammadi, C. Zheng, and W. Zhong, On the linear analysis of plates and shells using a new-16 degrees of freedom flat shell element, Computers & Structures, vol.78, issue.1-3, pp.11-20, 2000.
DOI : 10.1016/S0045-7949(00)00104-8

J. L. Batoz, H. Naceur, and Y. Q. Guo, Formability Predictions in Stamping and Process Parameter Optimization Based on The Inverse Approach Code Fast- Stamp, Proceedings of the Numisheet 2005 International Conference, pp.831-836, 2005.

J. A. Bennett and M. E. Botkin, Structural shape optimisation with geometric description and adaptive mesh refinment, AIAA Journal, vol.23, pp.3-458, 1984.

A. Bernard and G. Taillandier, Le prototypage rapide, Edition Hermès science, 1998.

P. Boisse, J. C. Gelin, and J. L. Daniel, Computation of thin structures at large strains and large rotations using a simple C0 isoparametric three-node shell element, Computers & Structures, vol.58, issue.2, pp.249-261, 1996.
DOI : 10.1016/0045-7949(95)00143-5

M. E. Botkin and J. A. Bennett, Structural shape optimisation with geometric description and adaptive mesh refinment, AIAA Journal, vol.23, pp.11-1804, 1985.

M. Brunet, S. Maguil-toushal, and F. , Morestin Numerical and Experimental Analysis of Necking in 3D Sheet Metal Forming Processes Using Damage Variable, Advanced Methods in Materials Processing Defects, pp.205-214, 1997.

D. Cartwright, P. R. Drake, and M. J. , Godwin Effect of low cost press tool materials on formability of sheet steel, Ironmaking and Steelmaking, vol.25, pp.2-131, 1998.

D. Cartwright, P. R. Drake, and M. J. , A method for comparing the performance of low-cost press tools for sheet forming, Journal of Materials Processing Technology, vol.95, issue.1-3, pp.49-54, 1999.
DOI : 10.1016/S0924-0136(99)00250-2

C. K. Chua, K. H. Hong, and S. L. Ho2, Rapid tooling technology. Part 1. A comparative study, The International Journal of Advanced Manufacturing Technology, vol.15, issue.8, pp.604-608, 1999.
DOI : 10.1007/s001700050108

]. P. Cognard and . Cognard, Collage des métaux : Généralités -Caractéristiques

M. Colgan and J. Monaghan, Deep drawing process: analysis and experiment, Journal of Materials Processing Technology, vol.132, issue.1-3, pp.35-41, 2003.
DOI : 10.1016/S0924-0136(02)00253-4

F. F. Damborg, M. R. Jensen, K. B. Nielsen, and J. Danckert, Optimization of the draw die profile with regard to wear using the FEM, 19th IDDRG Biennial Congress, pp.10-14, 1996.

]. B. Delebecque, G. Lauvaux, and C. Barlier, Stratoconception adaptative" : Une évolution logicielle pour améliorer la qualité et optimiser le temps de réalisation des prototypes par le procédé de Stratoconception, 2000.

M. Domaszewski, C. Knof-lenoir, J. L. Batoz, and G. Touzot, SHAPE OPTIMIZATION AND MINIMUM WEIGHT LIMIT DESIGN OF ARCHES, Engineering Optimization, vol.23, issue.3-4, pp.173-193, 1987.
DOI : 10.1098/rspa.1954.0132

J. C. Gelin, J. Oudin, and Y. Ravalard, An Improved Finite Element Method for the Analysis of Damage and Ductile Fracture in Cold Forming Processes, CIRP Annals, vol.34, issue.1, pp.1-209, 1985.
DOI : 10.1016/S0007-8506(07)61758-2

]. S. George-97, M. George, and K. Evans, Lowe Technoeconomic evaluation of autobody materilas, Ironmaking and Steelmaking, vol.24, pp.1-64, 1997.

]. J. Goupy-99 and . Goupy, Plans d'expériences pour surface de réponse, Dunod, 1999.

J. Guillot, Assemblages par éléments filetés : calcul, Techniques de l'Ingénieur, Traité de Génie Mécanique, 1987.

Y. Q. Guo, J. L. Batoz, H. Naceur, S. Bouabdallah, F. Mercier et al., Recent developments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach, Computers & Structures, vol.78, issue.1-3, pp.133-148, 2000.
DOI : 10.1016/S0045-7949(00)00095-X

]. M. Jensen-98a, F. F. Jensen, K. B. Damborg, J. Nielsen, and . Danckert, Applying the finite-element method for determination of tool wear in conventional deep-drawing, Journal of Materials Processing Technology, vol.83, issue.1-3, pp.98-105, 1998.
DOI : 10.1016/S0924-0136(98)00047-8

]. M. Jensen-98b, F. F. Jensen, K. B. Damborg, J. Nielsen, and . Danckert, Optimization of the draw-die design in conventional deep-drawing in order to minimise tool wear, Journal of Materials Processing Technology, vol.83, issue.1-3, pp.106-114, 1998.
DOI : 10.1016/S0924-0136(98)00048-X

J. Joseph, J. /. Beaman, and . Wtec, Rapid tooling : selective laser sintering injection tooling, Panel Report on Rapid Ptototyping in Europe and Japan : analytical chapiters Journal of Materials Processing Technology, vol.132, 2003.

]. R. Martin, Formage à la presse : travail des métaux en feuilles ; assemblage, Techniques de l'Ingénieur, Traité de Génie Mécanique, B7-II, art. B 7510, 1977.

H. Mueller and . Mueller, Experiences using rapid prototyping techniques to manufacture sheet metal dorming tools, 2000.

H. Müller and J. , Rapid tooling approaches for small lot production of sheet-metal parts, Journal of Materials Processing Technology, vol.115, issue.1, pp.97-103, 2001.
DOI : 10.1016/S0924-0136(01)00749-X

H. Naceur, A. Delamézière, J. L. Batoz, Y. Q. Guo, and C. , Knopf-LenoirSome improvements on the optimum process design in deep drawing using the Inverse Approach, Journal of Materials Processing Technology, vol.145, issue.2, pp.250-262, 2004.

A. Makinouchi, E. Nakamachi, E. Onate, and R. H. Wagoner, International Conference Numerical Simulation of 3-D Sheet Metal Forming Processes -Verification of Simulation with Experiments, Proceedings of Numisheet'93, 1993.

S. I. Yang, H. Oh, and Y. Huh, Hwan Kim, 5th International Conference Numerical Simulation of 3-D Sheet Metal Forming Processes -Verification of Simulation with Experiments, Proceedings of Numisheet'02, 2002.

M. Oudjene, F. Mercier, L. Penazzi, and J. L. Batoz, Finite Element Analysis of Laminated Tools for Sheet Metal Stamping, Proceedings of the 8th ESA- FORM Conference on Material Forming, pp.695-698, 2005.

M. Oudjene, F. Mercier, L. Penazzi, and J. L. Batoz, 3D Finite Element Modeling and Analysis of the Laminated Tooling Behaviour in Sheet Metal Stamping Process, Proceedings of the 24th IDDRG Biennial Congress, 2005.

M. Oudjene, F. Mercier, L. Penazzi, and J. L. Batoz, Modélisation du comportement d'outillages stratifiés basés sur la Stratoconception pour le procédé d'emboutissage , Actes du 17ème Congrès Français de Mécanique, pp.29-31, 2005.

M. Oudjene, J. L. Batoz, F. Mercier, L. Penazzi, and C. Pelaingre, Análisis mecánico de útiles de prototipado para estampanción de chapa metálica, Revista IMHE, pp.312-313, 2005.

T. Pepelnjak and K. , Kuzman Adaptable tooling sets for metal forming of geometrically similar products, Journal of Materials Processing Technology, pp.80-81, 1998.

J. M. Roelandt and J. L. Batoz, Shell finite element for deep drawing problems : computational aspects and results, IUTAM Symposium on finite inelastic deformations, pp.423-430, 1992.

K. Siegert and B. Haller, Prototype Draw Dies for Sheet Metal Parts, Automotive Engineers, pp.41-51, 1998.

R. Soar and P. Dickens, Design limits of unbonded laminate tooling for pressure die-casting, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.6, issue.3, pp.531-543, 2001.
DOI : 10.1243/PIME_PROC_1993_207_056_02

R. Yan, D. Zhang, F. Xu, and . Wang, Manufacturing of the die of an automobile deck part based on rapid prototyping and rapid tooling technology, Journal of Materials Processing Technology, vol.120, pp.237-242, 2000.

M. Takamura, K. Ohura, H. Sunaga, T. Kuwabara, A. Makinouchi et al., Sheet Forming Simulation Using a Static FEM Program and Considering the Elastic Deformation of Tools, AIP Conference Proceedings, 2004.
DOI : 10.1063/1.1766648

M. Tarfaoui and R. A. Shenoi, Etude numérique du comportement de joints collés simple recouvrement, Actes du 17ème Congrès Français de Mécanique, pp.29-31, 2005.

]. M. Tari, A. Bals, J. Park, M. Y. Lin, and H. T. Hahn, Rapid prototyping of composite parts using resin transfer molding and laminated object manufacturing, Composites Part A: Applied Science and Manufacturing, vol.29, issue.5-6, pp.651-661, 1998.
DOI : 10.1016/S1359-835X(97)00113-9

]. D. Walczyk-98a, D. E. Walczyk, and . Hardt, Design and analysis of reconfigurable discrete dies for sheet metal forming, Journal of Manufacturing Systems, vol.17, issue.6, pp.6-436, 1998.
DOI : 10.1016/S0278-6125(99)80003-X

]. D. Walczyk-98b, D. E. Walczyk, and . Hardt, Rapid Tooling for Sheet Metal Forming Using Profiled Edge Laminations???Design Principles and Demonstration, Journal of Manufacturing Science and Engineering, vol.207, issue.4, pp.746-754, 1998.
DOI : 10.1115/1.2830215

D. F. Walczyk and D. E. Hardt, A Comparison of Rapid Fabrication Methods for Sheet Metal Forming Dies, Journal of Manufacturing Science and Engineering, vol.4, issue.2, pp.214-224, 1999.
DOI : 10.1115/1.2831208

M. Yoneno, T. Sawa, and T. Ishihara, The Strength of Joints Combining Adhesives with Bolts. Case where Adherends are Pipe Flanges of which the Interfaces are Bonded Partially., JSME International Journal Series A, vol.42, issue.1, pp.126-134, 1999.
DOI : 10.1299/jsmea.42.126

H. H. Ziada and A. K. , Loading Conditions in Bolted and Riveted Joints Affected by Plate Thickness Ratio, Journal of Mechanical Design, vol.102, issue.4, pp.851-856, 1980.
DOI : 10.1115/1.3254832