A. Ae, A. Ae, A. Er, E. , E. et al., Tableau 5-1. Comportement dans l'élément le plus endommagé en fonction de la vitesse de roulement et des chargements appliqués Références bibliographiques RÉFÉRENCES BIBLIOGRAPHIQUES [1] Fracture toughness of medium-high carbon steel for railroad wheel Rolling contact fatigue of three pearlitic rail steels Fatigue of railway wheels and rails under rolling contact and thermal loading ? an overview, Cracks in railway wheels under rolling contact load Proceedings of the 10th International Wheelset Congress, pp.288-292, 1992.

A. Ekberg and J. Marais, Effects of imperfections on fatigue initiation in railway wheels, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol.214, issue.1, pp.45-54, 1999.
DOI : 10.1016/S0142-1123(97)00077-7

A. D. Hearle, K. L. Johnson, and E. Kabo, Mode II stress intensity factors for a crack parallel to the surface of an elastic half-space subjected to a moving point load, Topper, Crack growth and closure mechanisms of shear cracks under constant amplitude biaxial straining and periodic compressive overstraining in 1045 steel, pp.61-81, 1985.
DOI : 10.1016/0022-5096(85)90022-5

A. Ekberg, R. Lindqvist, and M. Olofsson, Multiaxial fatigue?a probabilistic analysis of initiation in cases of defined stress cycles, Proceedings of the Seventh International Fatigue Congress, Fatigue'99, pp.923-928, 1999.

E. Kabo and A. Ekberg, Fatigue initiation in railway wheels???a numerical study of the influence of defects, Wear, vol.253, issue.1-2, pp.26-34, 2002.
DOI : 10.1016/S0043-1648(02)00079-0

J. W. Ringsberg, Life prediction of rolling contact fatigue crack initiation, International Journal of Fatigue, vol.23, issue.7, pp.575-586, 2001.
DOI : 10.1016/S0142-1123(01)00024-X

K. L. Johnson, The Strength of Surfaces in Rolling Contact, Proc. Inst, pp.151-163, 1989.
DOI : 10.1016/0167-8442(84)90024-7

R. S. Ponter, A. D. Hearle, and K. L. Johnson, Application of the kinematical shakedown theorem to rolling and sliding point contacts, Journal of the Mechanics and Physics of Solids, vol.33, issue.4, pp.487-505, 1985.
DOI : 10.1016/0022-5096(85)90033-X

W. R. Tyfour, J. H. Beynon, and A. Kapoor, Deterioration of rolling contact fatigue life of pearlitic rail steel due to dry-wet rolling-sliding line contact, Wear, vol.197, issue.1-2, pp.255-265, 1996.
DOI : 10.1016/0043-1648(96)06978-5

H. P. Lieurade, R. Y. Deroche, B. Derboule, and R. Conti, A study of the shelling mechanism of rail, Proceedings of the Conference on Contact Mechanics and Wear of Rail/Wheel Systems II, pp.379-395, 1986.

J. Gordon and A. Perlman, Estimation of residual stresses in railroad commuter car wheels following manufacture, Proceedings of the international mechanical engineering congress and exhibition in, 1998.

H. Ghonem and J. Kalousek, Study of surface crack initiation due to biaxial compression/shear loading, Proceedings of the Conference on Contact Mechanics and Wear of Rail/Wheel Systems II, pp.339-360, 1986.
DOI : 10.1016/0013-7944(88)90158-0

X. Su and P. Clayton, Ratchetting strain experiments with a pearlitic steel under rolling/sliding contact, Wear, vol.205, issue.1-2, pp.137-143, 1997.
DOI : 10.1016/S0043-1648(96)07263-8

J. Ringsberg, Rolling contact fatigue of railway rails with emphasis on crack initiation, 2000.

A. Kapoor, A RE-EVALUATION OF THE LIFE TO RUPTURE OF DUCTILE METALS BY CYCLIC PLASTIC STRAIN, Fatigue & Fracture of Engineering Materials and Structures, vol.2, issue.4, pp.201-219, 1994.
DOI : 10.1016/0043-1648(86)90188-2

R. Lundén, Fatigue Durability of Tread-Braked Railway Wheels???on Admissible Combinations of Axle Load, Train Speed and Signalling Distance, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol.2, issue.77, pp.21-33, 1991.
DOI : 10.1007/978-3-7091-4380-3_8

S. L. Wong, P. E. Bold, M. W. Brown, and R. J. Allen, A branch criterion for shallow angled rolling contact fatigue cracks in rails, Wear, vol.191, issue.1-2, pp.45-53, 1996.
DOI : 10.1016/0043-1648(95)06621-7

S. Bogdanski, M. Olzak, and J. Stupnicki, The effects of face friction and tractive force on propagation of 3D 'squat' type of rolling contact fatigue crack, Proceedings of the Second Mini Conference on Contact Mechanics and Wear of Rail/Wheel Systems, pp.164-173, 1996.

A. F. Bower, The Influence of Crack Face Friction and Trapped Fluid on Surface Initiated Rolling Contact Fatigue Cracks, Journal of Tribology, vol.110, issue.4, pp.704-711, 1988.
DOI : 10.1115/1.3261717

S. Bogdanski, M. Olzak, and J. Stupnicki, NUMERICAL MODELLING OF A 3D RAIL RCF ???SQUAT???-TYPE CRACK UNDER OPERATING LOAD, Fatigue & Fracture of Engineering Materials & Structures, vol.21, issue.8, pp.923-935, 1998.
DOI : 10.1046/j.1460-2695.1998.00082.x

M. Ishida and N. Abe, Experimental study on rolling contact fatigue from the aspect of residual stress, Wear, vol.191, issue.1-2, pp.65-71, 1996.
DOI : 10.1016/0043-1648(95)06712-4

K. Kondo, K. Yoroizaka, and Y. Sato, Cause, increase, diagnosis, countermeasures and elimination of Shinkansen shelling, Wear, vol.191, issue.1-2, pp.199-203, 1996.
DOI : 10.1016/0043-1648(95)06727-2

E. Magel and J. Kalousek, Identifying and interpreting railway wheel defects, Proceedings of the International Heavy Haul Conference on Running Heavy, Running Fast into the 21st Century, pp.5-7, 1996.

J. Kalousek, E. Magel, J. Strasser, W. N. Caldwell, G. Kanevsky et al., Tribological interrelationship of seasonal fluctuations of freight car wheel wear, contact fatigue shelling and composition brakeshoe consumption, Wear, vol.191, issue.1-2, pp.210-218, 1996.
DOI : 10.1016/0043-1648(95)06700-0

A. Ekberg, E. Kabo, and H. Andersson, An engineering model for prediction of rolling contact fatigue of railway wheels, Fatigue Fract, Eng. Mater. Struct, pp.25-899, 2002.

W. Cheng, H. S. Cheng, and L. M. Keer, Experimental Investigation on Rolling/Sliding Contact Fatigue Crack Initiation with Artificial Defects, Tribology Transactions, vol.21, issue.1, pp.51-58, 1994.
DOI : 10.1115/1.3261979

P. Clayton and X. Su, Surface initiated fatigue of pearlitic and bainitic steels under water lubricated rolling/sliding contact, Wear, vol.200, issue.1-2, pp.63-73, 1996.
DOI : 10.1016/S0043-1648(96)07250-X

H. Muster, H. Schmedders, K. Wick, and H. Pradier, Rail rolling contact fatigue. The performance of naturally hard and head-hardened rails in track, Wear, vol.191, issue.1-2, pp.54-64, 1996.
DOI : 10.1016/0043-1648(95)06702-7

M. Ishida and N. Abe, Experimental study of the effect of preventive grinding for Shinkansen rails, Proceedings of the Sixth International Heavy Haul Conference, Cape Town, pp.565-575, 1997.

M. Ishida, N. Abe, and T. Moto, Experimental study on the effect of preventive grinding on RCF defects on Shinkansen rails, Proceedings of the IHHA'99, pp.511-516, 1999.

E. J. Hiensch, A. Kapoor, B. L. Josefson, J. W. Ringsberg, J. C. Nielsen et al., Two-material rail development to prevent rolling contact fatigue and to reduce noise levels in curved rail track, Proceedings of the World Congress on Railway Research, p.16, 2001.

F. Demilly, C. Lonsdale, T. Mccabe, V. Del-fabbro, E. Vallart et al., Wheel rim residual stress measurement using ultrasonic testing, Proceedings of the 13th International Wheelset Congress, 2001.

B. Alfredsson, A study on contact fatigue mechanisms, Royal Institute of Technology, 2000.

M. Olsson, Contact fatigue and tensile stresses, Engineering Against Fatigue, pp.651-657, 1999.

R. S. Zhou, H. S. Cheng, and T. Mura, Micropitting in Rolling and Sliding Contact Under Mixed Lubrication, Journal of Tribology, vol.111, issue.4, pp.605-613, 1989.
DOI : 10.1115/1.3261984

W. Cheng, H. S. Cheng, and L. M. Keer, Longitudinal Crack Initiation Under Pure Rolling Contact Fatigue??, Tribology Transactions, vol.10, issue.1, pp.51-58, 1994.
DOI : 10.1115/1.3453074

Y. Fujii and K. Maeda, Flaking failure in rolling contact fatigue caused by indentations on mating surface (I), Wear, vol.252, issue.9-10, pp.787-798, 2002.
DOI : 10.1016/S0043-1648(02)00033-9

Y. Fujii and K. Maeda, Flaking failure in rolling contact fatigue caused by indentations on mating surface (II), Wear, vol.252, issue.9-10, pp.799-810, 2002.
DOI : 10.1016/S0043-1648(02)00034-0

Y. Fujii and K. Maeda, Flaking failure in rolling contact fatigue caused by indentations on mating surface (III), Wear, vol.252, issue.9-10, pp.811-823, 2002.
DOI : 10.1016/S0043-1648(02)00035-2

K. Mitura, P. Matusek, and R. Faja, The failure of the railway tyres, repaired by surfacing, Proceedings of the 10th International Wheelset Congress, pp.157-161, 1992.

G. W. Bartley, A practical view of wheel tread shelling, Proceedings of the Ninth International Wheelset Congress, pp.5-6, 1988.

M. C. Fec and D. Utrata, Elevated temperature fatigue behaviour of class B, C and U wheel steels, ASME Rail Transportation Spring Conference Proceedings, pp.33-39, 1985.

H. Liu, N. Wang, and H. Zhen, Thermal damage test research of speed increased freight cars' wheel tread, Proceedings of the 13th International Wheelset Congress, 2001.

R. Lundén, Contact region fatigue of railway wheels under combined mechanical rolling pressure and thermal brake loading, Wear, vol.144, issue.1-2, pp.57-70, 1991.
DOI : 10.1016/0043-1648(91)90006-G

A. J. Opinsky, Understanding rim thermal failures in freight car wheels, Proceedings of the Ninth International Wheelset Congress, 1988.

K. Osuch, D. H. Stone, and O. Orringer, European and American wheels and their resistance to thermal damage, Proceedings of the 11th International Wheelset Congress, pp.77-86, 1995.

S. Marich and P. J. Mutton, Materials development in the Australian railway industry?past, present and future, Mech. Eng. Trans.: Inst. Engrs., Australia, pp.15-67, 1990.

J. Kalousek, E. Magel, and S. Grassie, Perspectives on metallurgy and contact mechanisms, Proceedings of the IHHA'99, pp.175-186, 1999.

J. Jergeus, Railway wheel flats?martensite formation, residual stresses, and crack propagation, 1998.

K. J. Sawley and J. A. Rosser, Tread damage in disc-braked wheels, Proceedings of the Ninth International Wheelset Congress, pp.5-9, 1988.

J. Jergeus, Martensite formation and residual stress around railway wheel flats, IMechE J. Rail Rapid Transit, vol.212, pp.69-79, 1998.

K. J. Sawley, J. A. Benyon, and E. G. Jones, Bainitic steels for railway wheels, Proceedings of the Ninth International Wheelset Congress, pp.2-6, 1988.

J. Marais, Wheel failures on heavy haul freight wheels due to subsurface effects, Proceedings of the 12th International Wheelset Congress, pp.306-314, 1998.

A. Ekberg, Rolling contact fatigue of railway wheels???a parametric study, Wear, vol.211, issue.2, pp.280-288, 1997.
DOI : 10.1016/S0043-1648(97)00106-3

S. Beretta, G. Donzella, R. Roberti, and A. Ghidini, Deep shelling in railway wheels, Proceedings of the 13th International Wheelset Congress, 2001.

P. J. Mutton, C. J. Epp, and J. Dudek, Rolling contact fatigue in railway wheels under high axle loads, Wear, vol.144, issue.1-2, pp.139-152, 1991.
DOI : 10.1016/0043-1648(91)90011-I

D. Stone, C. Lonsdale, and S. Kalay, Effect of wheel impact loading on shattered rims, Proceedings of the 13th International Wheelset Congress, 2001.

J. G. Giménez and H. Sobejano, Theoretical approach to the crack growth and fracture of wheels, Proceedings of the 11th International Wheelset Congress, pp.15-20, 1995.

M. R. Lynch, P. J. Mutton, K. J. Epp, and R. F. Donnelly, Improving wheelset performance under high axle loads, Proceedings of the 13th International Wheelset Congress, 2001.

J. Ahlström and B. Karlsson, Microstructural evaluation and interpretation of the mechanically and thermally affected zone under railway wheel flats, Wear, vol.232, issue.1, pp.1-14, 1999.
DOI : 10.1016/S0043-1648(99)00166-0

A. K. Hellier, D. J. Corderoy, and M. B. Mcgirr, A study of subsurface rail/wheel contact stresses with application to modelling rail fatigue, Proceedings of the Conference on Contact Mechanics and Wear of Rail/Wheel Systems II, pp.421-434, 1986.

A. K. Hellier, M. B. Mcgirr, and D. J. Corderoy, A finite element and fatigue threshold study of shelling in heavy haul rails, Wear, vol.144, issue.1-2, pp.289-306, 1991.
DOI : 10.1016/0043-1648(91)90021-L

P. Clayton, Tribological aspects of wheel-rail contact: a review of recent experimental research, Wear, vol.191, issue.1-2, pp.170-183, 1996.
DOI : 10.1016/0043-1648(95)06651-9

L. Krysanov and A. Abdurashitov, Influence of rail head wear rate on formation and development of cracks in their head, Proceedings of the IHHA'99, pp.485-488, 1999.

K. Sugino, H. Kageyama, T. Kuroki, C. Urashima, and A. Kikuchi, Metallurgical investigation of transverse defects in worn rails in service, Wear, vol.191, issue.1-2, pp.141-148, 1996.
DOI : 10.1016/0043-1648(95)06745-0

T. N. Farris, Effect of overlapping wheel passages on residual stress in rail corners, Wear, vol.191, issue.1-2, pp.226-236, 1996.
DOI : 10.1016/0043-1648(95)06724-8

R. K. Steele, The effect of metal removal, steel cleanliness and wheel load on the fatigue life of rail, Wear, vol.144, issue.1-2, pp.71-87, 1991.
DOI : 10.1016/0043-1648(91)90007-H

S. L. Grassie and J. Kalousek, Rolling contact fatigue of rails?characteristics, causes and treatments, Proceedings of the Sixth International Heavy Haul Conference, Cape Town, pp.381-404, 1997.

W. Fuguang, S. Guoying, H. Shishou, and L. Xuey, Rail defects of heavy haul railways, Proceedings of the Fifth International Heavy Haul Conference, pp.282-287, 1993.

K. Sugino, H. Kageyama, C. Urashima, and A. Kikuchi, Metallurgical improvement of rail for the reduction of rail-wheel contact fatigue failures, Wear, vol.144, issue.1-2, pp.319-328, 1991.
DOI : 10.1016/0043-1648(91)90023-N

S. Bogdanski, M. Olzak, and J. Stupnicki, Numerical stress analysis of rail rolling contact fatigue cracks, Wear, vol.191, issue.1-2, pp.14-24, 1996.
DOI : 10.1016/0043-1648(95)06685-3

H. M. Tournay and J. M. Mulder, The transition from the wear to the stress regime, Wear, vol.191, issue.1-2, pp.107-112, 1996.
DOI : 10.1016/0043-1648(95)06693-4

R. Czarnek, Development and application of an improved method for experimental determination of release fields in cut railroad car wheels, Wear, vol.191, issue.1-2, pp.95-100, 1996.
DOI : 10.1016/0043-1648(95)06756-6

Y. Wang, X. Shen, and F. Chiang, New experimental approach for studying residual stresses in rails, Wear, vol.191, issue.1-2, pp.90-94, 1996.
DOI : 10.1016/0043-1648(95)06699-3

D. H. Stone, B. R. Rajkumar, and W. J. Harris-jr, Wheel thermal failure mechanisms in heavy haul operations, Proceedings of the Ninth International Wheelset Congress, pp.5-6, 1988.

J. Magiera, J. Orkisz, and W. Karmowski, Reconstruction of residual stresses in railroad rails from measurements made on vertical and oblique slices, Wear, vol.191, issue.1-2, pp.78-89, 1996.
DOI : 10.1016/0043-1648(95)06728-0

A. Bernasconi, P. Davoli, and M. Filippini, Fatigue life of railway wheels: residual stresses and LCF, Proceedings of the 13 th International Wheelset Congress, 2001.

V. , D. Fabbro, and B. Catot, Ultrasonic measurement of stresses in new wheels, Proceedings of the 11th International Wheelset Congress, pp.251-259, 1995.

F. Demilly, B. Tulliez, and C. Catherine, Micrographic cleanness in railway wheels its measurement, its influence on crack initiation in fracture mechanics, Proceedings of the 11th International Wheelset Congress, pp.59-67, 1995.

E. Schneider and R. Herzer, Ultrasonic evaluation of stresses in rims of railroad wheels, Proceedings of the World Congress on Railway Research, pp.531-537, 1997.

R. E. Schramm, J. Szelazek, A. V. Clark, G. Garcia, and R. A. Pilon, Residual stress in railroad wheel rims: ultrasonic measurement to guide replacement-for- -215- Références bibliographiques cause, Proceedings of the World Congress on Railway Research, pp.431-437, 1996.

D. H. Stone, S. F. Kalay, J. V. Kristan, R. P. Reiff, and G. C. Garcia, Rail and wheel inspection systems, Proceedings of the IHHA'99, pp.331-337, 1999.

M. T. Hanson and L. M. Keer, An Analytical Life Prediction Model for the Crack Propagation Occurring in Contact Fatigue Failure, Tribology Transactions, vol.85, issue.3, pp.35-451, 1992.
DOI : 10.1016/0020-7683(79)90062-3

E. Kabo and A. Ekberg, Fatigue initiation in railway wheels???a numerical study of the influence of defects, Wear, vol.253, issue.1-2, pp.1-9, 2002.
DOI : 10.1016/S0043-1648(02)00079-0

Y. Murakami and M. Endo, Effects of defects, inclusions and inhomogeneities on fatigue strength, International Journal of Fatigue, vol.16, issue.3, pp.163-182, 1994.
DOI : 10.1016/0142-1123(94)90001-9

Y. Murakami and S. Nemat-nasser, Growth and stability of interacting surface flaws of arbitrary shape, Engineering Fracture Mechanics, vol.17, issue.3, pp.193-210, 1983.
DOI : 10.1016/0013-7944(83)90027-9

Y. Jiang and H. Sehitoglu, A model for rolling contact failure, Wear, vol.224, issue.1, pp.38-49, 1999.
DOI : 10.1016/S0043-1648(98)00311-1

E. Kabo and A. Ekberg, Fatigue initiation in railway wheels ? on the influence of defects, Proceedings of 5th International Conference on Contact Mechanics and Wear of Wheel/Rail Systems, pp.25-28, 2000.

M. Sato, Wear and rolling contact fatigue on rail steels, 1991.

D. Danks and P. Clayton, Comparison of the wear process for eutectoid rail steels: Field and laboratory tests, Wear, vol.120, issue.2, pp.233-50, 1987.
DOI : 10.1016/0043-1648(87)90069-X

D. Nélias, M. Dumont, F. Champiot, A. Vincent, D. Girodin et al., Role of Inclusions, Surface Roughness and Operating Conditions on Rolling Contact Fatigue, Journal of Tribology, vol.111, issue.2, pp.240-51, 1999.
DOI : 10.1115/1.3453127

J. Ringsberg, M. Loo-morrey, B. Josefson, A. Kapoor, and J. Beynon, Prediction of fatigue crack initiation for rolling contact fatigue, International Journal of Fatigue, vol.22, issue.3, pp.205-220, 2000.
DOI : 10.1016/S0142-1123(99)00125-5

C. Chue and H. Chung, Pitting formation under rolling contact, Theoretical and Applied Fracture Mechanics, vol.34, issue.1, pp.1-9, 2000.
DOI : 10.1016/S0167-8442(00)00019-7

J. Flasker, G. Fajdiga, S. Glodez, and T. Hellen, Numerical simulation of surface pitting due to contact loading, International Journal of Fatigue, vol.23, issue.7, pp.599-605, 2001.
DOI : 10.1016/S0142-1123(01)00020-2

A. Kapoor, F. Schmid, and D. Fletcher, Managing the critical wheel/rail interface. Railway Gazette International, 2002.

G. Donzella, M. Faccoli, A. Ghidini, A. Mazzù, and R. Roberti, The competitive role of wear and RCF in a rail steel, Engineering Fracture Mechanics, vol.72, issue.2, pp.287-308, 2005.
DOI : 10.1016/j.engfracmech.2004.04.011

T. Telliskivi, Wheel-Rail Interaction Analysis, Doctoral Thesis, Department of Machine Design, Royal Institute of Technology, KTH, 2003.

Z. L. Li and J. J. Kalker, Simulation of Severe Wheel-Rail Wear, Proc. of the 6 th International Conference on Computer Aided Design, Manufacture and Operation in the Railway and Other Advanced Mass Transit Systems: Computational Mechanics Publications, pp.393-402, 1998.

C. Linder and H. Brauschli, Prediction of wheel wear, Proc. of 2nd Mini Conf. on Contact Mechanics and Wear of Rail/Wheel Systems, 1996.

D. I. Fletcher and J. H. Beynon, The influence of lubricant type on rolling contact fatigue of pearlitic rail steel, Lubrication at the Frontier: Proceedings of the 25th Leeds?Lyon Symposium on Tribology, pp.8-11, 1998.
DOI : 10.1016/S0167-8922(99)80051-0

M. Sergey, I. G. Zakharov, and . Goryacheva, Rolling contact fatigue defects in freight car wheels, Wear, vol.258, pp.1142-1147, 2005.

K. Sawley and J. Kristan, Development of bainitic rail steels with potential resistance to rolling contact fatigue, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.211, issue.10, pp.1019-1029, 2003.
DOI : 10.1016/S0043-1648(98)00311-1

I. Papadopoulos, P. Davoli, C. Gorla, M. Filippini, and A. Bernasconi, A comparative study of multiaxial high-cycle fatigue criteria for metals, International Journal of Fatigue, vol.19, issue.3, pp.219-254, 1997.
DOI : 10.1016/S0142-1123(96)00064-3

K. Johnson, Contact mechanics. Cambridge, 1985.

Y. Guo and M. Barkey, Modeling of rolling contact fatigue for hard machined components with process-induced residual stress, International Journal of Fatigue, vol.26, issue.6, pp.605-618, 2004.
DOI : 10.1016/j.ijfatigue.2003.10.009

A. Fatemi and D. Socie, A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT-OF-PHASE LOADING, Fatigue & Fracture of Engineering Materials and Structures, vol.106, issue.3, pp.149-65, 1988.
DOI : 10.1007/BF00184149

M. Sraml, J. Flasker, and I. Potrc, Numerical procedure for predicting the rolling contact fatigue crack initiation, International Journal of Fatigue, vol.25, issue.7, pp.585-95, 2003.
DOI : 10.1016/S0142-1123(03)00019-7

A. Ekberg, H. Bjarnehed, and R. Lundén, A FATIGUE LIFE MODEL FOR GENERAL ROLLING CONTACT WITH APPLICATION TO WHEEL/RAIL DAMAGE, Fatigue & Fracture of Engineering Materials and Structures, vol.98, issue.10, pp.1189-1199, 1995.
DOI : 10.1016/0013-7944(86)90022-6

D. Van and K. , Criterion for high cycle fatigue failure under multiaxial loading, in biaxial and multiaxial fatigue, Mechanical Engineering Publications, pp.459-78, 1989.

Y. Liu and S. Mahadevan, Multiaxial high-cycle fatigue criterion and life prediction for metals, International Journal of Fatigue, vol.27, issue.7, pp.790-800, 2005.
DOI : 10.1016/j.ijfatigue.2005.01.003

A. F. Bower, Cyclic hardening properties of hard-drawn copper and rail steel, Journal of the Mechanics and Physics of Solids, vol.37, issue.4, pp.455-470, 1989.
DOI : 10.1016/0022-5096(89)90024-0

J. Lemaître and J. Chaboche, Mechanics of solid materials, 1990.

Y. Jiang and H. Sehitoglu, Rolling contact stress analysis with the application of a new plasticity model, Wear, vol.191, issue.1-2, pp.35-44, 1996.
DOI : 10.1016/0043-1648(95)06663-2

Y. Jiang and H. Sehitoglu, Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relations, Journal of Applied Mechanics, vol.30, issue.3, pp.720-725, 1996.
DOI : 10.1115/1.3443440

Y. Jiang and H. Sehitoglu, Modeling of Cyclic Ratchetting Plasticity, Part II: Comparison of Model Simulations With Experiments, Journal of Applied Mechanics, vol.63, issue.3, pp.726-733, 1996.
DOI : 10.1115/1.2823356

J. W. Ringsberg, Cyclic ratchetting and failure of a pearlitic rail steel, 217- Références bibliographiques, pp.747-758, 2000.
DOI : 10.1016/S0749-6419(99)00059-5

J. Morrow, Cyclic Plastic Strain Energy and Fatigue of Metals, pp.45-87, 1965.
DOI : 10.1520/STP43764S

Y. S. Garud, A New Approach to the Evaluation of Fatigue Under Multiaxial Loadings, Journal of Engineering Materials and Technology, vol.103, issue.2, pp.118-125, 1981.
DOI : 10.1115/1.3224982

K. N. Smith, P. Watson, and T. H. Topper, A stress-strain function for the fatigue of metals, J. Mater., JMLSA, vol.5, issue.4, pp.767-778, 1970.

Y. Liu, B. Stratman, and S. Mahadevan, Fatigue crack initiation life prediction of railroad wheels, International Journal of Fatigue, vol.28, issue.7, pp.747-756, 2006.
DOI : 10.1016/j.ijfatigue.2005.09.007

L. Keer, M. Bryant, and G. Haritos, Subsurface and Surface Cracking Due to Hertzian Contact, Journal of Lubrication Technology, vol.104, issue.3, pp.347-51, 1982.
DOI : 10.1115/1.3253217

P. Bastias, G. Hahn, and C. Rubin, Finite element modelling of subsurface mode II cracks under contact loads, Engineering Fracture Mechanics, vol.33, issue.1, pp.143-52, 1989.
DOI : 10.1016/0013-7944(89)90062-3

K. Komvopoulos and S. Cho, Finite element analysis of subsurface crack propagation in a half-space due to a moving asperity contact, Wear, vol.209, issue.1-2, pp.57-68, 1997.
DOI : 10.1016/S0043-1648(97)00029-X

M. Guagliano, L. Sana, M. Vergani, and L. , Analysis of cracked elements subjected to contact loading, Proceedings of the Fracture and Damage Mechanics, pp.191-200, 1999.

M. Guagliano and L. Vergani, Experimental and numerical analysis of sub-surface cracks in railway wheels, Engineering Fracture Mechanics, vol.72, issue.2, pp.255-269, 2005.
DOI : 10.1016/j.engfracmech.2004.04.010

N. Noda, M. Yagishita, and T. Kihara, Effect of crack shape, inclination angle, and friction coefficient in crack surface contact problems, International Journal of Fracture, vol.105, issue.4, pp.367-389, 2000.
DOI : 10.1023/A:1007688027669

M. Kaneta, Y. Murakami, and T. Okazaki, Growth Mechanism of Subsurface Crack Due to Hertzian Contact, Journal of Tribology, vol.108, issue.1, pp.134-139, 1986.
DOI : 10.1115/1.3261133

S. Beretta, G. Donzella, and R. Roberti, Crack propagation in the wheel?rail contact fatigue, Proceedings of the Rolling Contact Fatigue: Applications and Developments, pp.39-52, 2002.

E. Lansler and E. Kabo, Subsurface crack face displacements in railway wheels, Wear, vol.258, issue.7-8, pp.1038-1047, 2005.
DOI : 10.1016/j.wear.2004.03.053

J. W. Ringsberg, Shear mode growth of short surface-breaking RCF cracks, Wear, vol.258, issue.7-8, pp.955-963, 2005.
DOI : 10.1016/j.wear.2004.03.043

M. Taraf, O. Oussouaddi, and A. Zeghloul, Numerical analysis for predicting the rolling contact fatigue crack initiation in a railway wheel steel, Tribology International, vol.43, issue.3
DOI : 10.1016/j.triboint.2009.09.007

H. Zahaf, M. Taraf, O. Oussouaddi, and A. Zeghloul, Numerical analysis of crack initiation in railway wheel steel, The 8th National Congress on Mechanics, pp.6-9, 2007.

M. Taraf, M. F. Ghanameh, M. M. Touati, O. Oussouaddi, and A. Zeghloul, Influence de la géométrie du défaut sur la fatigue de contact de roulement dans une roue de locomotive, Journées Internationales Francophones de Tribologie 11-13 mai, 2005.

M. Taraf, M. F. Ghanameh, M. M. Touati, O. Oussouaddi, and A. Zeghloul, Influence de la géométrie du défaut sur la fatigue de contact de roulement dans une roue de locomotive, Presses Polytechniques et Universitaire Romandes (PPUR), le numéro ISBN 2-88074-671-X sous le titre, pp.59-69, 2006.

M. Taraf, M. F. Ghanameh, M. M. Touati, O. Oussouaddi, and A. Zeghloul, Influence des défauts et des surcharges sur l'endommagement par fatigue de -218- Références bibliographiques contact de roulement dans une roue de locomotive, 17ème Congrès Français de Mécanique 29 août à 2 septembre, p.482, 2005.

M. Taraf, A. Zeghloul, M. F. Ghanameh, M. M. Touati, and O. Oussouaddi, Influence d'amas de défauts sur l'endommagement par fatigue de contact de roulement dans une roue de locomotive, 7ème Congrès de Mécanique 18-21 avril, pp.97-99, 2005.

M. Taraf, M. F. Ghanameh, M. M. Touati, O. Oussouaddi, and A. Zeghloul, Numerical Simulation Of Material Subsurface Defects In Rolling Contact Fatigue, World Tribology Congress III 12-16, pp.2005-63654, 2005.

J. Benabes, Approche énergétique non locale du calcul de durée de vie de structures en fatigue multiaxiale sous chargements d'amplitude variable : Application à une roue de train ferroviaire, 2006.

M. S. Ramos, M. V. Pereira, F. A. Darwish, S. H. Motta, and M. A. , Effect of single and multiple overloading on the residual fatigue life of a structural steel, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.3, issue.2, pp.115-121, 2003.
DOI : 10.1016/0013-7944(78)90061-9

B. K. Yuen and F. , Proposed modifications to the Wheeler retardation model for multiple overloading fatigue life prediction, International Journal of Fatigue, vol.28, issue.12, pp.1803-1819, 2006.
DOI : 10.1016/j.ijfatigue.2005.12.007

S. Pommier, Cyclic plasticity and variable amplitude fatigue, International Journal of Fatigue, vol.25, issue.9-11, pp.983-997, 2003.
DOI : 10.1016/S0142-1123(03)00137-3

URL : https://hal.archives-ouvertes.fr/hal-01636591

X. Decoopman, Influence des conditions de chargement sur le retard a` la propagation d'une fissure de fatigue après l'application d'une surcharge. Thesis, 1999.

R. Hamam, S. Pommier, and F. , Variable amplitude fatigue crack growth, experimental results and modeling, International Journal of Fatigue, vol.29, issue.9-11, pp.1634-1646, 2007.
DOI : 10.1016/j.ijfatigue.2007.02.005

URL : https://hal.archives-ouvertes.fr/hal-01636575

T. Ohyama, Some basic studies on the influence of surface contamination on adhesion force between wheel and rail at higher speeds, Q. Rep. Railway Tech. Res. Inst. (Tokyo), vol.30, issue.2, pp.127-135, 1989.

T. Ohyama, Fundamental adhesion phenomena between wheel and rail at high speeds, some experiments with a high speed rolling test machine under water, Q. Rep. Railway Tech. Res. Inst. (Tokyo), vol.26, issue.4, pp.135-140, 1985.

J. Xiaoyu and J. Xuesong, Numerical simulation of wheel rolling over rail at high-speeds, Wear, vol.262, issue.5-6, pp.666-671, 2007.
DOI : 10.1016/j.wear.2006.08.007