]. X. Liu, R. Devor, S. Kapoor, and K. Ehman, The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science, Journal of Manufacturing Science and Engineering, vol.49, issue.239, pp.666-678, 2004.
DOI : 10.1115/1.3664242

W. Skrotzki, N. Scheerbaum, C. Oertel, R. Arruffat-massion, S. Suwas et al., Microstructure and texture gradient in copper deformed by equal channel angular pressing, Acta Materialia, vol.55, issue.6, pp.2013-2024, 2007.
DOI : 10.1016/j.actamat.2006.11.005

J. Wang, Y. Gong, G. Abba, J. Cao, J. Shi et al., Micro Milling Technologies for MEMS, 2007 International Conference on Perspective Technologies and Methods in MEMS Design, pp.86-95, 2007.
DOI : 10.1109/MEMSTECH.2007.4283432

J. Corbett, P. Mckeon, G. Peggs, and R. Whatmore, Nanotechnology: International Developments and Emerging Products, CIRP Annals, vol.49, issue.2, pp.523-546, 2000.
DOI : 10.1016/S0007-8506(07)63454-4

M. Madou, Fundamentals of Microfabrication, 1997.

M. Weck, S. Fischer, and M. Vos, Fabrication of microcomponents using ultraprecision machine tools, Nanotechnology, vol.8, issue.3, pp.145-148, 1997.
DOI : 10.1088/0957-4484/8/3/007

W. Lang, Reflexions on the future of microsystems, Sensors and Actuators A: Physical, vol.72, issue.1, pp.1-15, 1999.
DOI : 10.1016/S0924-4247(98)00205-2

Y. Okazaki, N. Mishima, and K. Ashida, Microfactory???Concept, History, and Developments, Journal of Manufacturing Science and Engineering, vol.3, issue.4, pp.837-844, 2004.
DOI : 10.1115/1.1823491

P. Picart and J. Michel, Effects of size and texture on the constitutive behavior for very small components in sheet metal forming, Proceedings of the Sixth International Conference on Technology of Plasticity, 1999.

V. Lemiale and P. Picart, Modelling and simulation of precision blankling for very thin components, Journal of Steels and Related Materials, vol.1, pp.413-416, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00020439

T. Masuzawa, State of the Art of Micromachining, CIRP Annals, vol.49, issue.2, pp.473-488, 2000.
DOI : 10.1016/S0007-8506(07)63451-9

G. Benavides, D. Adams, and P. Yang, Meso-machining capabilities, Tech. rep., Sanding Report, 2001.
DOI : 10.2172/782720

R. Howe, Micro systems research in japan, World Technology Evaluation Center (WTEC), 2003.

M. Tanaka, Development of desktop machining microfactory, Riken Review, 2001.

Y. Bang, K. Lee, and S. Oh, 5-axis micro milling machine for machining micro parts, The International Journal of Advanced Manufacturing Technology, vol.43, issue.9-10, pp.888-894, 2005.
DOI : 10.1007/s00170-003-1950-1

E. Kussul, T. Baidyk, L. Ruiz-huerta, A. Caballero-ruiz, G. Velasco et al., Micromechanical engineering: a basis for the low-cost manufacturing of mechanical microdevices using microequipment, Journal of Micromechanics and Microengineering, vol.6, issue.4, pp.410-425, 1996.
DOI : 10.1088/0960-1317/6/4/008

E. Kussul, T. Baidyk, L. Ruiz-huerta, A. Caballero-ruiz, G. Velasco et al., Development of micromachine tool prototypes for microfactories, Journal of Micromechanics and Microengineering, vol.12, issue.6, pp.795-812, 2002.
DOI : 10.1088/0960-1317/12/6/311

J. Hesselbach, A. Raatz, and J. Wreg, International state of the art of micro production technology, Production Engineering, vol.11, issue.1, pp.29-36, 2004.

J. Chae, S. Park, and T. Freiheit, Investigation of micro-cutting operations, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.313-332, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.015

D. Dornfeld, S. Min, and Y. Takeuchi, Recent Advances in Mechanical Micromachining, CIRP Annals, vol.55, issue.2, pp.745-768, 2006.
DOI : 10.1016/j.cirp.2006.10.006

H. Onikura, O. Ohnishi, and Y. Take, Fabrication of Micro Carbide Tools by Ultrasonic Vibration Grinding, CIRP Annals, vol.49, issue.1, pp.257-260, 2000.
DOI : 10.1016/S0007-8506(07)62941-2

F. Fang, H. Wu, X. Liu, Y. Liu, and S. Ng, Tool geometry study in micromachining, Journal of Micromechanics and Microengineering, vol.13, issue.5, pp.726-731, 2003.
DOI : 10.1088/0960-1317/13/5/327

M. Vogler, X. Liu, S. Kapoor, R. Devor, and K. Ehmann, Development of meso-scale machine tool (mmt) systems, Transactions of North American Manufacturing Research Institution, vol.30, pp.1-9, 2002.

S. Kapoor, Current state of micro-scale machine tool systems and machining research, Workshop on micromanufacturing, natural science foundation, 2004.

T. Moriwaki, N. Sugimura, and S. Luan, Combined Stress, Material Flow and Heat Analysis of Orthogonal Micromachining of Copper, CIRP Annals, vol.42, issue.1, pp.75-78, 1993.
DOI : 10.1016/S0007-8506(07)62395-6

J. Kim and D. Kim, Theoretical analysis of micro-cutting characteristics in ultra-precision machining, Journal of Materials Processing Technology, vol.49, issue.3-4, pp.387-398, 1995.
DOI : 10.1016/0924-0136(94)01345-2

M. Vogler, R. Devor, and S. Kapoor, On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part I: Surface Generation, Journal of Manufacturing Science and Engineering, vol.70, issue.4, pp.684-693, 2004.
DOI : 10.1115/1.1813470

M. Vogler, R. Devor, and S. Kapoor, On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part II: Cutting Force Prediction, Journal of Manufacturing Science and Engineering, vol.23, issue.4, pp.695-705, 2004.
DOI : 10.1115/1.3604585

K. Liu, X. Li, and M. Rahman, Characteristics of high speed micro-cutting of tungsten carbide, Journal of Materials Processing Technology, vol.140, issue.1-3, pp.352-357, 2003.
DOI : 10.1016/S0924-0136(03)00758-1

S. Son, H. Lim, and J. Ahn, Effects of the friction coefficient on the minimum cutting thickness in micro cutting, International Journal of Machine Tools and Manufacture, vol.45, issue.4-5, pp.529-535, 2005.
DOI : 10.1016/j.ijmachtools.2004.09.001

H. Weule, V. Huntrup, and H. Tritschler, Micro-Cutting of Steel to Meet New Requirements in Miniaturization, CIRP Annals, vol.50, issue.1, pp.61-64, 2001.
DOI : 10.1016/S0007-8506(07)62071-X

B. Ikua, H. Tanaka, F. Obata, and S. Sakamoto, Prediction of cutting forces and machining error in ball end milling of curved surfacesI theoretical analysis, Journal of International Societies of Precision Engineering and Nanotechnology, vol.25, pp.266-273, 2001.

W. Bao and I. , Modeling micro-end-milling operations. Part I: analytical cutting force model, International Journal of Machine Tools and Manufacture, vol.40, issue.15, pp.2155-2173, 2000.
DOI : 10.1016/S0890-6955(00)00054-7

J. Grum and M. Kisin, Influence of microstructure on surface integrity in turning???part II: the influence of a microstructure of the workpiece material on cutting forces, International Journal of Machine Tools and Manufacture, vol.43, issue.15, pp.1545-1551, 2003.
DOI : 10.1016/S0890-6955(03)00200-1

W. Lee, C. Cheung, and S. To, Materials induced vibration in ultraprecision machining, Journal of Materials Processing Technology, vol.89, pp.90-318, 1999.

T. Dow, E. Miller, and K. Garrard, Tool force and deflection compensation for small milling tools, Precision Engineering, vol.28, issue.1, pp.31-45, 2004.
DOI : 10.1016/S0141-6359(03)00072-2

A. Dugas, J. Lee, and J. Hascoet, An enhanced machining simulator with tool deflection error analysis, Journal of Manufacturing Systems, vol.21, issue.6, pp.451-463, 2002.
DOI : 10.1016/S0278-6125(02)80051-6

X. Liu, R. Devor, and S. Kapoor, Model-Based Analysis of the Surface Generation in Microendmilling???Part I: Model Development, Journal of Manufacturing Science and Engineering, vol.129, issue.3, pp.453-460, 2007.
DOI : 10.1016/0043-1648(93)90304-5

X. Liu, R. Devor, and S. Kapoor, Model-Based Analysis of the Surface Generation in Microendmilling???Part II: Experimental Validation and Analysis, Journal of Manufacturing Science and Engineering, vol.50, issue.3, pp.461-469, 2007.
DOI : 10.1115/1.2162905

G. Byrne, D. Dornfeld, and B. Denkena, Advancing Cutting Technology, CIRP Annals, vol.52, issue.2, pp.483-507, 2003.
DOI : 10.1016/S0007-8506(07)60200-5

URL : https://cloudfront.escholarship.org/dist/prd/content/qt7hd8r1ft/qt7hd8r1ft.pdf

T. Schaller, L. Bohn, J. Mayer, and K. Schubert, Microstructure grooves with a width of less than 50 ??m cut with ground hard metal micro end mills, Precision Engineering, vol.23, issue.4, pp.229-235, 1999.
DOI : 10.1016/S0141-6359(99)00011-2

I. Tansel, T. Arkan, W. Bao, N. Mahendrakar, B. Shisler et al., Tool wear estimation in micro-machining., International Journal of Machine Tools and Manufacture, vol.40, issue.4, pp.609-620, 2000.
DOI : 10.1016/S0890-6955(99)00074-7

K. Weinert and V. Petzoldt, Machining of NiTi based shape memory alloys, Materials Science and Engineering: A, vol.378, issue.1-2, pp.180-184, 2004.
DOI : 10.1016/j.msea.2003.10.344

S. Shabouk and T. Nakamoto, Micro machining of single crystal diamond by utilization of tool wear during cutting process of ferrous material, Journal of Micromechatronics, vol.2, issue.1, pp.13-26, 2003.
DOI : 10.1163/156856302766647125

B. Kim, M. Schmittdiel, F. Degertekin, and T. Kurfess, Scanning Grating Microinterferometer for MEMS Metrology, Journal of Manufacturing Science and Engineering, vol.50, issue.4, pp.807-812, 2004.
DOI : 10.1115/1.1812773

M. Hart, R. Conant, K. Lau, and R. Muller, Stroboscopic interferometer system for dynamic MEMS characterization, Journal of Microelectromechanical Systems, vol.9, issue.4, pp.409-418, 2000.
DOI : 10.1109/84.896761

D. Popa, B. Kang, J. Wen, and H. Stephanou, Dynamic modeling and input shaping of thermal bimorph MEMS actuators, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422), pp.1470-1475, 2003.
DOI : 10.1109/ROBOT.2003.1241799

H. V. Brussel, J. Peirs, D. Reynaerts, A. Delchambre, G. Reinhart et al., Assembly of Microsystems, CIRP Annals, vol.49, issue.2, pp.451-472, 2000.
DOI : 10.1016/S0007-8506(07)63450-7

D. Cox, G. Newby, H. Park, and S. Liang, Performance Evaluation of a Miniaturized Machining Center for Precision Manufacturing, Manufacturing Engineering and Materials Handling Engineering, 2004.
DOI : 10.1115/IMECE2004-60431

D. Adams, M. Vasile, G. Benavides, and A. Cambell, Micromilling of metal alloys with focused ion beam???fabricated tools, Precision Engineering, vol.25, issue.2, pp.107-113, 2001.
DOI : 10.1016/S0141-6359(00)00064-7

B. Rooks, The shrinking sizes in micro manufacturing, Assembly Automation, vol.24, issue.4, pp.352-356, 2004.
DOI : 10.1108/01445150410562534

Y. Takeuchi, Y. Sakaida, K. Sawada, and T. Sata, Development of a 5-Axis Control Ultraprecision Milling Machine for Micromachining Based on Non-Friction Servomechanisms, CIRP Annals, vol.49, issue.1, pp.295-298, 2000.
DOI : 10.1016/S0007-8506(07)62949-7

H. Tonshoff, Developments and Trends in Monitoring and Control of Machining Processes, CIRP Annals, vol.37, issue.2, pp.611-622, 1988.
DOI : 10.1016/S0007-8506(07)60758-6

M. Shaw, Precision Finishing*, CIRP Annals, vol.44, issue.1, pp.343-348, 1995.
DOI : 10.1016/S0007-8506(07)62339-7

T. Schmitz, M. Davies, and M. Kennedy, Tool Point Frequency Response Prediction for High-Speed Machining by RCSA, Journal of Manufacturing Science and Engineering, vol.48, issue.1, pp.700-707, 2002.
DOI : 10.6028/NIST.TN.1297

Y. Furukawa and N. Moronoki, Effect of Material Properties on Ultra Precise Cutting Processes, CIRP Annals, vol.37, issue.1, pp.113-116, 1988.
DOI : 10.1016/S0007-8506(07)61598-4

D. Lucca, R. Rohrer, and R. Komanduri, Energy Dissipation in the Ultraprecision Machining of Copper, CIRP Annals, vol.40, issue.1, pp.69-72, 1991.
DOI : 10.1016/S0007-8506(07)61936-2

A. Matsubara, Y. Kakino, T. Ogawa, H. Nakagawa, and T. Sato, Monitoring of cutting forces in end-milling for intelligent machine tools, Proceedings of the Fifth International Conference on Progress of Machining Technology, p.615, 2000.

M. Vogler, R. Devor, and S. Kapoor, Microstructure-Level Force Prediction Model for Micro-milling of Multi-Phase Materials, Journal of Manufacturing Science and Engineering, vol.2, issue.2, pp.202-209, 2002.
DOI : 10.1080/10940349808945669

M. Davies, C. Evans, and K. Harper, Chip segmentation in machining aisi 52100 steel, pp.235-238, 1995.

M. Davies, Y. Chou, and C. Evans, On Chip Morphology, Tool Wear and Cutting Mechanics in Finish Hard Turning, CIRP Annals, vol.45, issue.1, pp.77-82, 1995.
DOI : 10.1016/S0007-8506(07)63020-0

W. Konig, A. Berktold, and K. Koch, Turning versus Grinding ??? A Comparison of Surface Integrity Aspects and Attainable Accuracies, CIRP Annals, vol.42, issue.1, pp.39-43, 1993.
DOI : 10.1016/S0007-8506(07)62387-7

Y. Altintas, Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design, 2000.
DOI : 10.1017/CBO9780511843723

E. Budak, Improving Productivity and Part Quality in Milling of Titanium Based Impellers by Chatter Suppression and Force Control, CIRP Annals, vol.49, issue.1, pp.31-36, 2000.
DOI : 10.1016/S0007-8506(07)62890-X

V. Jardret, H. Zahouani, J. Loubet, and T. Mathia, Understanding and quantification of elastic and plastic deformation during a scratch test, Wear, vol.218, issue.1, pp.8-14, 1998.
DOI : 10.1016/S0043-1648(98)00200-2

C. Kim, J. Mayor, and J. Ni, A Static Model of Chip Formation in Microscale Milling, Journal of Manufacturing Science and Engineering, vol.79, issue.4, pp.710-718, 2004.
DOI : 10.1115/1.3438504

J. Tlusty and P. Macneil, Dynamics of cutting forces in end milling, Annals of CIRP, vol.24, issue.1, pp.21-25, 1975.

J. Tlusty and G. Andrews, A Critical Review of Sensors for Unmanned Machining, CIRP Annals, vol.32, issue.2, pp.563-572, 1983.
DOI : 10.1016/S0007-8506(07)60184-X

W. Lee, C. Cheung, and S. To, A Microplasticity Analysis of Micro-Cutting Force Variation in Ultra-Precision Diamond Turning, Journal of Manufacturing Science and Engineering, vol.43, issue.2, pp.170-177, 2002.
DOI : 10.1016/S0007-8506(07)62158-1

M. Xiao, K. Sato, S. Karube, and T. Soutone, The effect of tool nose radius in ultrasonic vibration cutting of hard metal, International Journal of Machine Tools and Manufacture, vol.43, issue.13, pp.1375-1382, 2003.
DOI : 10.1016/S0890-6955(03)00129-9

C. Liu and S. , Single-step superfinish hard machining: Feasibility and feasible cutting conditions, Robotics and Computer-Integrated Manufacturing, vol.12, issue.1, pp.15-27, 1996.
DOI : 10.1016/0736-5845(95)00029-1

I. Tansel, T. Arkan, W. Bao, N. Mahendrakar, B. Shisler et al., Tool wear estimation in micro-machining., International Journal of Machine Tools and Manufacture, vol.40, issue.4, pp.599-608, 2000.
DOI : 10.1016/S0890-6955(99)00073-5

M. Rahman, S. Kumar, and J. Prakash, Micro milling of pure copper, Journal of Materials Processing Technology, vol.116, issue.1, pp.39-43, 2001.
DOI : 10.1016/S0924-0136(01)00848-2

O. Ozdoganlar, D. Epp, P. Reu, and H. Sumali, Development of a Testing Facility for Experimental Investigation of MEMS Dynamics, Microelectromechanical Systems, 2004.
DOI : 10.1115/IMECE2004-61010

A. Atre, Dynamic response of surface micro machined horizontal beam flexure actuator, Proceedings ASME International Mechanical Engineering Congress and Exposition, 2004.

R. Fearing, Grasping for macro-scale and micro-scale, in: Workshop on Working in the Micro-world: Systems to Enable the Manipulation and Machining of Micro-objects, pp.202-209, 1995.

C. Kim, A. Pisano, and R. Muller, Silicon-processed overhanging microgripper, Journal of Microelectromechanical Systems, vol.1, issue.1, pp.31-36, 1992.
DOI : 10.1109/84.128053

H. T. Suzumori and S. Likura, Flexible micro actuator for miniature robots, Proceedings of IEEE MEMS Workshop, pp.204-209, 1991.

J. Peirs, D. Reynaerts, and H. V. Brussel, A micro robotic arm for a self propelling colonoscope, Proceedings Actuator, pp.576-579, 1998.

M. Weck, J. Hummler, and B. Petersen, Assembly of hybrid micro systems in a large chamber electron microscope by use of mechanical grippers, Proceedings of SPIE, Micromachining and Micro fabrication Process Technology III, pp.223-229, 1997.

J. Breguet, S. Henein, R. Mericio, and R. , Monolithic piezoceramic flexible structures for micromanipulation, Proceedings of the Ninth International Precision Engineering Seminar, pp.397-400, 1997.

Y. Furuya and H. Shimada, Shape memory actuators for robotic applications, in: Engineering Aspect of Shape Memory Alloys, pp.338-355, 1990.

G. Greitmann and R. Buser, Tactile microgripper for automated handling of microparts, Sensors and Actuators A: Physical, vol.53, issue.1-3, pp.410-415, 1996.
DOI : 10.1016/0924-4247(96)80164-6

Y. Yao, X. Fang, and G. Amdt, Comprehensive tool wear estimation in finishmachining via multivariate time-series analysis of 3-d cutting forces, Annals of CIRP, pp.39-57, 1990.

R. Kountanya and W. Endres, Flank Wear of Edge-Radiused Cutting Tools Under Ideal Straight-Edged Orthogonal Conditions, Journal of Manufacturing Science and Engineering, vol.4, issue.3, pp.496-505, 2004.
DOI : 10.1115/1.3439085

S. Tobias and W. Fishwick, A Theory of Regenerative Chatter, The Engineer, 1958.

S. Park, Y. Altintas, and M. Movahhedy, Receptance coupling for end mills, International Journal of Machine Tools and Manufacture, vol.43, issue.9, pp.889-896, 2003.
DOI : 10.1016/S0890-6955(03)00088-9

W. Bao and I. , Modeling micro-end-milling operations. Part II: tool run-out, International Journal of Machine Tools and Manufacture, vol.40, issue.15, pp.2175-2192, 2000.
DOI : 10.1016/S0890-6955(00)00055-9

M. Jun, X. Liu, R. Devor, and S. Kapoor, Investigation of the Dynamics of Microend Milling???Part I: Model Development, Journal of Manufacturing Science and Engineering, vol.113, issue.4, pp.893-900, 2006.
DOI : 10.1016/S0022-5096(02)00060-1

M. Jun, X. Liu, R. Devor, and S. Kapoor, Investigation of the Dynamics of Microend Milling???Part II: Model Validation and Interpretation, Journal of Manufacturing Science and Engineering, vol.246, issue.4, pp.901-912, 2006.
DOI : 10.1016/S0043-1648(98)00200-2

R. Vallance, E. Marsh, and P. Smith, Effects of Spherical Targets on Capacitive Displacement Measurements, Journal of Manufacturing Science and Engineering, vol.46, issue.47, pp.822-829, 2004.
DOI : 10.6028/bulletin.070

W. Lee and C. Cheung, A dynamic surface topography model for the prediction of nano-surface generation in ultra-precision machining, International Journal of Mechanical Sciences, vol.43, issue.4, pp.961-991, 2001.
DOI : 10.1016/S0020-7403(00)00050-3

E. Rivin, Tooling Structure: Interface between Cutting Edge and Machine Tool, CIRP Annals, vol.49, issue.2, pp.591-634, 2000.
DOI : 10.1016/S0007-8506(07)63457-X

K. Matsushima, P. Bertok, and T. Sata, In process detection of tool breakage by monitoring the spindle current of a machine tool, ASME Journal of Measurement and Control, pp.145-154, 1982.

N. Constantinides and S. Bennett, An investigation of methods for the on-line estimation of tool wear, International Journal of Machine Tools and Manufacture, vol.27, issue.2, pp.225-237, 1987.
DOI : 10.1016/S0890-6955(87)80052-4

Y. Altintas, Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurements, Journal of Engineering for Industry, vol.114, issue.4, pp.386-392, 1992.
DOI : 10.1115/1.2900688

T. Kim and J. Kim, Adaptive cutting force control for a machining center by using indirect cutting force measurements, International Journal of Machine Tools and Manufacture, vol.36, issue.8, pp.925-937, 1996.
DOI : 10.1016/0890-6955(96)00097-1

T. El-wardany, D. Gao, and M. Elbestawi, Tool condition monitoring in drilling using vibration signature analysis, International Journal of Machine Tools and Manufacture, vol.36, issue.6, pp.687-711, 1996.
DOI : 10.1016/0890-6955(95)00058-5

T. Moriwaki, Detection for Cutting Tool Fracture by Acoustic Emission Measurement, CIRP Annals, vol.29, issue.1, pp.35-40, 1980.
DOI : 10.1016/S0007-8506(07)61291-8

A. Sampath and S. Vajpayee, Tool health monitoring using acoustic emission, International Journal of Production Research, vol.25, issue.5, pp.703-719, 1996.
DOI : 10.1080/00207548708919872

D. Choi, W. Kwon, and C. Chu, Real-Time Monitoring of Tool Fracture in Turning Using Sensor Fusion, The International Journal of Advanced Manufacturing Technology, vol.15, issue.5, pp.305-310, 1999.
DOI : 10.1007/s001700050071

D. Yan, T. El-wardany, and M. Elbestawi, A multi-sensor strategy for tool failure detection in milling, International Journal of Machine Tools and Manufacture, vol.35, issue.3, pp.383-398, 1995.
DOI : 10.1016/0890-6955(94)E0021-A

G. Byrne, D. Dornfeld, I. Inasaki, W. Konig, and R. Teti, Tool Condition Monitoring (TCM) ??? The Status of Research and Industrial Application, CIRP Annals, vol.44, issue.2, pp.541-567, 1995.
DOI : 10.1016/S0007-8506(07)60503-4

D. Dimla, Sensor signals for tool-wear monitoring in metal cutting operations???a review of methods, International Journal of Machine Tools and Manufacture, vol.40, issue.8, pp.1073-1098, 2000.
DOI : 10.1016/S0890-6955(99)00122-4

S. Park and Y. Altintas, Dynamic Compensation of Cutting Forces Measured From the Spindle Integrated Force Sensor System, Dynamic Systems and Control, 2002.
DOI : 10.1115/IMECE2002-32037

A. Ulsoy and Y. Koren, Applications of adaptive control to machine tool process control, IEEE Control Systems Magazine, vol.9, issue.4, pp.33-37, 1989.
DOI : 10.1109/37.24837

Y. Koren, Computer Control of Manufacturing Systems, 1983.

I. Tansel, A. Nedbouyan, M. Trujillo, and B. , Micro-end-milling???II. Extending tool life with a Smart Workpiece Holder (SWH), International Journal of Machine Tools and Manufacture, vol.38, issue.12, pp.1437-1448, 1998.
DOI : 10.1016/S0890-6955(98)00016-9

X. Luo, K. Cheng, D. Webb, and F. Wardle, Design of ultraprecision machine tools with applications to manufacture of miniature and micro components, Journal of Materials Processing Technology, vol.167, issue.2-3, pp.515-528, 2005.
DOI : 10.1016/j.jmatprotec.2005.05.050

K. Furuta, Y. Ishikawa, Y. Mikuriya, and Y. Takahashi, The microfactory system in national r&d project of miti, Proceedings of the International Workshop on Microfactories, pp.193-196, 1998.

R. Subrahmanian and K. F. Ehmann, Development of a meso-scale machine tool (mmt) for micro-machining, Proceeding of Japan-USA Symposium on Flexible Automation, pp.163-169, 2002.

A. Honegger, S. Kapoor, and R. Devor, A Hybrid Methodology for Kinematic Calibration of Micro/Meso-Scale Machine Tools (mMTs), Journal of Manufacturing Science and Engineering, vol.29, issue.2, pp.513-522, 2006.
DOI : 10.1109/70.466613

S. W. Lee, R. Mayor, and J. Ni, Dynamic Analysis of a Mesoscale Machine Tool, Journal of Manufacturing Science and Engineering, vol.41, issue.1, pp.194-203, 2006.
DOI : 10.1115/1.1392994

K. Ashida, N. Mishima, H. Maekawa, T. Tanikawa, K. Kaneko et al., Development of desktop machining microfactory, Proceeding of Japan- USA Symposium on Flexible Automation, pp.175-178, 2000.

S. Filiz, C. Conley, M. Wasserman, and O. Ozdoganlar, An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills, International Journal of Machine Tools and Manufacture, vol.47, issue.7-8, pp.47-1088, 2007.
DOI : 10.1016/j.ijmachtools.2006.09.024

J. Wang, J. Shi, Y. Gong, G. Abba, and G. Cai, A Micro Milling Model Considering Metal Phases and Minimum Chip Thickness, Key Engineering Materials, vol.375, issue.376, pp.375-376, 2008.
DOI : 10.4028/www.scientific.net/KEM.375-376.505

L. Zhang, D. Zhao, J. Zhang, X. Sun, and C. , Pang, Development of miniaturized numerical control milling machine tool used in micro cutting, Journal of Southeast University (Natural Science Edition), vol.137, issue.1, pp.26-29, 2007.

J. K. Rusnaldy, H. S. Tae, and . Kim, An experimental study on microcutting of silicon using a micromilling machine, The International Journal of Advanced Manufacturing Technology, vol.258, issue.6, pp.85-91, 2008.
DOI : 10.1016/S0921-5093(00)01031-5

K. Malukhin and K. Ehmann, Identification of direct metal deposition (dmd) process parameters for manufacturing thin wall structures from shape memory alloy (niti) powder, Transactions of the North American Manufacturing Research Institution of SME, pp.35-481, 2007.

K. Furutani, M. Suzuki, and R. Kudoh, Nanometre-cutting machine using a Stewart-platform parallel mechanism, Measurement Science and Technology, vol.15, issue.2, pp.467-474, 2004.
DOI : 10.1088/0957-0233/15/2/022

H. Shinno and Y. Ito, Computer Aided Concept Design for Structural Configuration of Machine Tools: Variant Design Using Directed Graph, Journal of Mechanisms Transmissions and Automation in Design, vol.109, issue.3, pp.311-318, 1987.
DOI : 10.1115/1.3258805

F. Chan, Design of material handling equipment selection system: an integration of expert system with analytic hierarchy process approach, Integrated Manufacturing Systems, vol.13, issue.1, pp.58-68, 2003.
DOI : 10.1016/0278-6125(96)84195-1

K. Chau and F. Albermani, Expert system application on preliminary design of water retaining structures, Expert Systems with Applications, vol.22, issue.2, pp.169-178, 2003.
DOI : 10.1016/S0957-4174(01)00053-7

M. Chew, S. Shen, and G. Issa, Kinematic Structural Synthesis of Mechanisms Using Knowledge-Based Systems, Journal of Mechanical Design, vol.101, issue.1, pp.96-103, 1995.
DOI : 10.1115/1.3454082

H. Chen, Generation and evaluation of meso-scale machine tool designs for micro-machining applications, 2005.

J. Lee, S. Park, and S. Yang, Machining a Micro/Meso Scale Structure Using a Minaturized Machine Tool by Using a Conventional Cutting Process, Journal of Manufacturing Science and Engineering, vol.64, issue.3, pp.820-825, 2006.
DOI : 10.1088/0957-4484/8/3/007

E. L. Zhang, W. W. He, H. Du, and K. Yang, Microstructure, mechanical properties and corrosion properties of Mg???Zn???Y alloys with low Zn content, Materials Science and Engineering: A, vol.488, issue.1-2, pp.102-111, 2008.
DOI : 10.1016/j.msea.2007.10.056

E. Lee and B. Shaffer, The theory of plasticity applied to a problem of machining, ASME Journal of Applied Mechanics, vol.18, pp.405-413, 1951.

R. Walsh, Handbook of Machining and Metalworking Calculations, 2001.

Z. Wu, Handbook of mechanical design, 1999.

L. Toth, R. Massion, L. Germain, S. Baik, and S. Suwas, Analysis of texture evolution in equal channel angular extrusion of copper using a new flow field, Acta Materialia, vol.52, issue.7, pp.1885-1898, 2004.
DOI : 10.1016/j.actamat.2003.12.027

URL : https://hal.archives-ouvertes.fr/hal-00161955

M. Shaw, Metal cutting principles, Tribology International, vol.18, issue.1, 1984.
DOI : 10.1016/0301-679X(85)90013-1

URL : https://babel.hathitrust.org/cgi/imgsrv/download/pdf?id=wu.89042722868;orient=0;size=100;seq=9;attachment=0

J. Tlusty, System and methods of testing machine tools, 1959.

W. Kline and R. Devor, The effect of runout on cutting geometry and forces in end milling, International Journal of Machine Tool Design and Research, vol.23, issue.2-3, pp.123-140, 1983.
DOI : 10.1016/0020-7357(83)90012-4

W. Kim, A. Argento, and R. Scott, FORCED VIBRATION AND DYNAMIC STABILITY OF A ROTATING TAPERED COMPOSITE TIMOSHENKO SHAFT: BENDING MOTIONS IN END-MILLING OPERATIONS, Journal of Sound and Vibration, vol.246, issue.4, pp.583-600, 2001.
DOI : 10.1006/jsvi.2000.3521

Y. Altintas and E. Budak, Analytical Prediction of Stability Lobes in Milling, CIRP Annals, vol.44, issue.1, pp.357-362, 1995.
DOI : 10.1016/S0007-8506(07)62342-7

D. Montgomery and Y. , Mechanism of Cutting Force and Surface Generation in Dynamic Milling, Journal of Engineering for Industry, vol.113, issue.2, pp.160-168, 1991.
DOI : 10.1115/1.2899673

K. Lee, H. Kim, and S. Park, A run-out measuring method using modeling and simulation in four-fluted end milling, Journal of Materials Processing Technology, vol.187, issue.188, pp.188-207, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.203

V. Gagnol, B. Bouzgarrou, P. Ray, and C. Barra, Model-based chatter stability prediction for high-speed spindles, International Journal of Machine Tools and Manufacture, vol.47, issue.7-8, pp.1176-1186, 2007.
DOI : 10.1016/j.ijmachtools.2006.09.002

W. Nakkiew, C. Lin, and J. Tu, A new method to quantify radial error of a motorized end-milling cutter/spindle system at very high speed rotations, International Journal of Machine Tools and Manufacture, vol.46, issue.7-8, pp.877-889, 2006.
DOI : 10.1016/j.ijmachtools.2005.04.021

J. Antoine, G. Abba, and C. Sauvey, Approximate explicit calculation of first vibration frequencies of an unsymmetrical high speed rotor, American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, vol.116, issue.2, pp.1141-1149, 2003.

S. Filiz and O. Ozdoganlar, Microendmill Dynamics Including the Actual Fluted Geometry and Setup Errors???Part II: Model Validation and Application, Journal of Manufacturing Science and Engineering, vol.110, issue.3, pp.31120-31121, 2008.
DOI : 10.1117/12.646556

A. Tulsian, M. Wasserman, and O. Ozdoganlar, Measurement of dynamic runout characteristics of ultra-high-speed miniature spindles for micromachining, International Conference on Micro Manufacturing, 2007.

X. Li, R. Du, B. Denkena, and J. Imiela, Tool breakage monitoring using motor current signals for machine tools with linear motors, Industrial Electronics, IEEE Transactions on, vol.52, issue.5, pp.1403-1408, 2005.

K. Lee and D. Dornfeld, Micro-burr formation and minimization through process control, Precision Engineering, vol.29, issue.2, pp.246-252, 2005.
DOI : 10.1016/j.precisioneng.2004.09.002

T. Schmitz, J. Couey, E. Marsh, N. Mauntler, and D. Hughes, Runout effects in milling: Surface finish, surface location error, and stability, International Journal of Machine Tools and Manufacture, vol.47, issue.5, pp.841-85, 2007.
DOI : 10.1016/j.ijmachtools.2006.06.014

W. Estler, C. Evans, and L. Shao, Uncertainty estimation for multiposition form error metrology, Computer Standards & Interfaces, vol.21, issue.2, pp.72-82, 1997.
DOI : 10.1016/S0920-5489(99)92238-9

J. Antoine, C. Visa, G. Abba, and C. Sauvey, Electrospindle design for high speed machining, 5th Int. congress on High Speed Machining, pp.329-340, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01710668

B. Wen, Mechanical Vibration, 2000.

C. Friedrich and V. Kulkarni, Effect of workpiece springback on micromilling forces, Microsystem Technologies, vol.10, issue.6-7, pp.472-477, 2004.
DOI : 10.1007/s00542-004-0375-6

C. Arcona and T. Dow, An Empirical Tool Force Model for Precision Machining, Journal of Manufacturing Science and Engineering, vol.8, issue.4, pp.700-707, 1998.
DOI : 10.1115/1.3604585

J. Wang, S. Liang, and W. Book, Convolution Analysis of Milling Force Pulsation, Journal of Engineering for Industry, vol.116, issue.1, pp.17-25, 1994.
DOI : 10.1115/1.2901804

V. Astakhov, S. Shvets, and M. Osman, Chip structure classification based on mechanics of its formation, Journal of Materials Processing Technology, vol.71, issue.2, pp.247-257, 1997.
DOI : 10.1016/S0924-0136(97)00081-2

H. Ernst, Physics of metal cutting, machining of metal, 1938.

V. Astakhov, Metal Cutting Mechanics, Boca Raton, 1998.

M. Shaw, N. Cook, and I. Finnie, The shear-angle relationship in metal cutting, ASME Journal of Engineering for Industry, vol.75, pp.273-288, 1953.

E. Usui and T. Shirakashi, Mechanics of machining from descriptive to predictive theory, on the art of cutting metals, ASME PED, vol.7, pp.13-35, 1982.

J. Strenkowski and J. Carroll, A Finite Element Model of Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.107, issue.4, pp.347-354, 1985.
DOI : 10.1115/1.3186008

E. Ceretti, P. Fallbohmer, W. Wu, and T. Altan, Application of 2D FEM to chip formation in orthogonal cutting, Journal of Materials Processing Technology, vol.59, issue.1-2, pp.169-180, 1996.
DOI : 10.1016/0924-0136(96)02296-0

T. Ozel and T. Altan, Process simulation using finite element method ??? prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling, International Journal of Machine Tools and Manufacture, vol.40, issue.5, pp.713-738, 2000.
DOI : 10.1016/S0890-6955(99)00080-2

P. Rosa, O. Kolednik, P. Martins, and A. Atkins, The transient beginning to machining and the transition to steady-state cutting, International Journal of Machine Tools and Manufacture, vol.47, issue.12-13, pp.12-13, 2007.
DOI : 10.1016/j.ijmachtools.2007.03.005

J. Mackerle, Finite element analysis and simulation of machining: an addendum, International Journal of Machine Tools and Manufacture, vol.43, issue.1, pp.103-114, 1996.
DOI : 10.1016/S0890-6955(02)00162-1

L. Chuzhoy, R. Devor, S. Kapoor, A. Beaudoin, and D. Bammann, Machining Simulation of Ductile Iron and Its Constituents, Part 1: Estimation of Material Model Parameters and Their Validation, Journal of Manufacturing Science and Engineering, vol.107, issue.2, pp.181-191, 2003.
DOI : 10.1098/rspa.1925.0034

L. Chuzhoy, R. Devor, and S. Kapoor, Machining Simulation of Ductile Iron and Its Constituents, Part 2: Numerical Simulation and Experimental Validation of Machining, Journal of Manufacturing Science and Engineering, vol.106, issue.2, pp.192-201, 2003.
DOI : 10.1115/1.3185915

A. Simoneau, E. Ng, and M. Elbestawi, Chip formation during microscale cutting of a medium carbon steel, International Journal of Machine Tools and Manufacture, vol.46, issue.5, pp.467-481, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.019

A. Simoneau, E. Ng, and M. Elbestawi, Surface defects during microcutting, International Journal of Machine Tools and Manufacture, vol.46, issue.12-13, pp.1378-1387, 2006.
DOI : 10.1016/j.ijmachtools.2005.10.001

T. Ozel, X. Liu, and A. Dhanorker, Modelling and simulation of micro-milling process, Proceeding of 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, 2007.

K. Woon, M. Rahman, F. Fang, K. Neo, and K. Liu, Investigations of tool edge radius effect in micromachining: A FEM simulation approach, Journal of Materials Processing Technology, vol.195, issue.1-3, pp.204-211, 2008.
DOI : 10.1016/j.jmatprotec.2007.04.137

R. Komanduri, L. Narulkar, and R. Raff, Monte Carlo simulation of nanometric cutting, Philosophical Magazine, vol.12, issue.11, pp.1155-1183, 2004.
DOI : 10.1016/S0007-8506(07)62781-4

K. Cheng, X. Luo, R. Ward, and R. Holt, Modeling and simulation of the tool wear in nanometric cutting, Wear, vol.255, issue.7-12, pp.7-12, 2003.
DOI : 10.1016/S0043-1648(03)00178-9

K. Ueda and K. Manabe, Chip Formation Mechanism in Microcutting of an Amorphous Metal, CIRP Annals, vol.41, issue.1, pp.129-132, 1992.
DOI : 10.1016/S0007-8506(07)61168-8

C. Kim, M. Bono, and J. Ni, Experimental analysis of chip formation in micromilling , Transactions of North American Manufacturing Research Institution of SME, pp.247-254, 2002.

K. Lee and D. Dornfeld, An experimental study on burr formation in micro milling aluminium and copper, Transactions of North American Manufacturing Research Institution of SME, pp.255-262, 2002.

M. Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.44, issue.5, pp.267-275, 1945.
DOI : 10.1063/1.1714987

J. Shi and C. Liu, The Influence of Material Models on Finite Element Simulation of Machining, Journal of Manufacturing Science and Engineering, vol.37, issue.4, pp.849-857, 2004.
DOI : 10.1115/1.3439085

]. T. Ozel, The influence of friction models on finite element simulations of machining, International Journal of Machine Tools and Manufacture, vol.46, issue.5, pp.518-530, 2006.
DOI : 10.1016/j.ijmachtools.2005.07.001

G. Johnson and W. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, pp.541-547, 1983.

G. Johnson, R. Stryk, T. Holmquist, and S. Beissel, User instruction for the 1996 version of the epic code, Tech. rep, 1996.

J. Hamann, V. Grolleau, and F. L. Maitre, Machinability Improvement of Steels at High Cutting Speeds ??? Study of Tool/Work Material Interaction, CIRP Annals, vol.45, issue.1, pp.87-92, 1996.
DOI : 10.1016/S0007-8506(07)63022-4

]. T. Ozel and E. Zeren, Determination of work material flow stress and friction properties for fea of machining using orthogonal cutting tests, Journal of Materials Processing Technology, pp.153-154, 2004.

N. Zorev, Interrelationship between shear processes occurring along tool face and on shear plane in metal cutting, Proceedings of the international research in production engineering conference, pp.42-49, 1963.

K. Iwata, K. Osakada, and Y. Terasaka, Process Modeling of Orthogonal Cutting by the Rigid-Plastic Finite Element Method, Journal of Engineering Materials and Technology, vol.106, issue.2, pp.132-138, 1984.
DOI : 10.1115/1.3225687

T. Childs, Friction modelling in metal cutting, Wear, vol.260, issue.3, pp.310-318, 2006.
DOI : 10.1016/j.wear.2005.01.052

M. Medaska, L. Nowag, and S. Liang, SIMULTANEOUS MEASUREMENT OF THE THERMAL AND TRIBOLOGICAL EFFECTS OF CUTTING FLUID, Machining Science and Technology, vol.7, issue.2, pp.221-237, 1999.
DOI : 10.1243/PIME_PROC_1963_177_058_02

J. Black, Flow Stress Model in Metal Cutting, Journal of Engineering for Industry, vol.101, issue.4, p.403, 1979.
DOI : 10.1115/1.3439527

M. Shaw, Chip Formation in the Machining of Hardened Steel, CIRP Annals - Manufacturing Technology, vol.42, issue.1, pp.29-33, 1993.
DOI : 10.1016/S0007-8506(07)62385-3

E. Eugene, Etude experimentale sur l'influence conjoninte de la pente d'affutage de l'outil et de la vitesse de coupe sur les modalites de la formation de copeau, Annals of CIRP, vol.4, issue.121, 1957.

P. Albrecht, Self-Induced Vibrations in Metal Cutting, Journal of Engineering for Industry, vol.84, issue.4, p.405, 1962.
DOI : 10.1115/1.3667524

V. Astakhov, S. Shvets, and M. Osman, The bending moment as the cause of chip formation, in: Proceeding of American Society of Mechanical Engineers International Mechanical Engineering Congress and Exposition, p.53, 1997.

J. Wang, Y. Gong, G. Abba, K. Chen, J. Shi et al., Surface generation analysis in micro end-milling considering the influences of grain, Microsystem Technologies, vol.45, issue.7, pp.937-942, 2008.
DOI : 10.1007/s00542-007-0478-y

URL : https://hal.archives-ouvertes.fr/hal-00257686

K. Liu and S. Melkote, Material Strengthening Mechanisms and Their Contribution to Size Effect in Micro-Cutting, Journal of Manufacturing Science and Engineering, vol.364, issue.3, pp.730-738, 2006.
DOI : 10.1016/S0167-6636(97)00035-5

I. Kang, J. Kim, J. Kim, M. Kang, and Y. Seo, A mechanistic model of cutting force in the micro end milling process, Journal of Materials Processing Technology, vol.187, issue.188, pp.188-250, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.155

H. Bil, S. Kiliç, and A. Tekkaya, A comparison of orthogonal cutting data from experiments with three different finite element models, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.933-944, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.016

A. Moufki, A. Molinari, and D. Dudzinski, Modelling of orthogonal cutting with a temperature dependent friction law, Journal of the Mechanics and Physics of Solids, vol.46, issue.10, pp.1092-1027, 1998.
DOI : 10.1016/S0022-5096(98)00032-5

P. Venuinod and W. Jin, Three-dimensional cutting force analysis based on the lower boundary of the shear zone. Part 1: Single edge oblique cutting, International Journal of Machine Tools and Manufacture, vol.36, issue.3, pp.307-323, 1996.
DOI : 10.1016/0890-6955(95)00069-0

P. Venuinod, Three-dimensional cutting force analysis based on the lower boundary of the shear zone. Part 2: Two edge oblique cutting, International Journal of Machine Tools and Manufacture, vol.36, issue.3, pp.325-338, 1996.
DOI : 10.1016/0890-6955(95)00070-4

Y. Gong, J. Wang, G. Abba, J. Antoine, and J. Shi, Tool tip trajectories investigation and its influences in micromilling operation, IEEE Review on Advances in Micro

T. Childs, K. Maekawa, T. Obikawa, and Y. Yamane, Metal machining: theory and applications, 2000.

A. Diniz and R. Micaroni, Cutting conditions for finish turning process aiming: the use of dry cutting, International Journal of Machine Tools and Manufacture, vol.42, issue.8, pp.899-904, 2002.
DOI : 10.1016/S0890-6955(02)00028-7

C. Sanjay, M. Neema, and C. Chin, Modeling of tool wear in drilling by statistical analysis and artificial neural network, Journal of Materials Processing Technology, vol.170, issue.3, pp.494-500, 2005.
DOI : 10.1016/j.jmatprotec.2005.04.072

A. Singh, S. Panda, D. Chakraborty, and S. , Predicting drill wear using an artificial neural network, The International Journal of Advanced Manufacturing Technology, vol.28, issue.5-6, pp.456-462, 2006.
DOI : 10.1007/s00170-004-2376-0

L. Xu, J. Davim, and R. Cardoso, Prediction on tribiological behaviour of composite peek-cf30 using artificial neural networks, Journal of Materials Processing Technology, vol.189, pp.374-378, 2007.

I. El-sonbaty, U. Khashaba, A. Selmy, and A. Ali, Prediction of surface roughness profiles for milled surfaces using an artificial neural network and fractal geometry approach, Journal of Materials Processing Technology, vol.200, issue.1-3, pp.271-278, 2008.
DOI : 10.1016/j.jmatprotec.2007.09.006

M. Korosec and J. Kopac, Improved surface roughness as a result of free-form surface machining using self-organized neural network, Journal of Materials Processing Technology, vol.204, issue.1-3, pp.94-102, 2008.
DOI : 10.1016/j.jmatprotec.2007.10.080

B. Huang, J. Chen, and Y. Li, Artificial-neural-networks-based surface roughness Pokayoke system for end-milling operations, Neurocomputing, vol.71, issue.4-6, pp.544-549, 2008.
DOI : 10.1016/j.neucom.2007.07.029

A. Markopoulos, D. Manolakos, and N. Vaxevanidis, Artificial neural network models for the prediction of surface roughness in electrical discharge machining, Journal of Intelligent Manufacturing, vol.43, issue.10, pp.283-292, 2008.
DOI : 10.1016/j.jmatprotec.2004.04.189

D. Zhang and H. Li, A stochastic-based fpga controller for an induction motor drive with integrated neural network algorithms, Industrial Electronics, IEEE Transactions on, vol.55, issue.2, pp.551-561, 2008.

T. Pajchrowski and K. Zawirski, Application of artificial neural network to robust speed control of servodrive, Industrial Electronics, IEEE Transactions on, vol.54, issue.1, pp.200-207, 2007.

K. Kiguchi and T. Fukuda, Position/force control of robot manipulators for geometrically unknown objects using fuzzy neural networks, Industrial Electronics, IEEE Transactions on, vol.47, issue.3, pp.641-649, 2000.

X. Li, A. Djordjevich, and P. Venuvinod, Current-sensor-based feed cutting force intelligent estimation and tool wear condition monitoring, Industrial Electronics, IEEE Transactions on, vol.47, issue.3, pp.697-702, 2000.
DOI : 10.1109/41.847910

URL : http://lixiaoli.tripod.com/papers/IEEEIE.pdf

C. Hudson, N. Lobo, and R. Krishnan, Sensorless control of single switchbased switched reluctance motor drive using neural network, Industrial Electronics, IEEE Transactions on, vol.55, issue.1, pp.321-329, 2008.

H. Oktem, T. Erzurumlu, and F. Erzincanli, Prediction of minimum surface roughness in end milling mold parts using neural network and genetic algorithm, Materials & Design, vol.27, issue.9, pp.735-744, 2006.
DOI : 10.1016/j.matdes.2005.01.010

P. Ross, Taguchi Techniques for Quality Engineering, 1996.

M. Weck, S. Fischer, and M. Vos, Fabrication of microcomponents using ultraprecision machine tools, Nanotechnology, vol.8, issue.3, pp.145-148, 1997.
DOI : 10.1088/0957-4484/8/3/007

K. Furuta, Y. Ishikawa, Y. Mikuriya, and Y. Takahashi, The microfactory system in national r&d project of miti, Proceedings of the International Workshop on Microfactories, pp.193-196, 1998.

H. Chen, Generation and evaluation of meso-scale machine tool designs for micro-machining applications, 2005.

D. Dornfeld, S. Min, and Y. Takeuchi, Recent Advances in Mechanical Micromachining, CIRP Annals, vol.55, issue.2, pp.745-768, 2006.
DOI : 10.1016/j.cirp.2006.10.006

S. Son, H. Lim, and J. Ahn, Effects of the friction coefficient on the minimum cutting thickness in micro cutting, International Journal of Machine Tools and Manufacture, vol.45, issue.4-5, pp.45-529, 2005.
DOI : 10.1016/j.ijmachtools.2004.09.001

Z. Wu, Handbook of mechanical design, 1999.

J. Antoine, C. Visa, G. Abba, and C. Sauvey, Electrospindle design for high speed machining, 5th Int. congress on High Speed Machining, pp.329-340, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01710668

M. Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.44, issue.5, pp.267-275, 1945.
DOI : 10.1063/1.1714987

C. Arcona and T. Dow, An Empirical Tool Force Model for Precision Machining, Journal of Manufacturing Science and Engineering, vol.8, issue.4, pp.700-707, 1998.
DOI : 10.1115/1.3604585