A. Andersson, C. A. Ohlsson, K. Mattiason, and B. Persson, Implementation and evaluation of the Karafillis?Boyce material model for anisotropic metal sheets, Proceedings of NUMISHEET, 1999.

S. Aoki, K. Amaya, M. Sahashi, and T. Nakamura, Identification of Gurson's material constants by using Kalman filter, Computational Mechanics, vol.19, issue.6, pp.501-506, 1997.
DOI : 10.1007/s004660050199

D. Banabic, T. Kuwabara, T. Balan, D. Comsa, and D. Julean, Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions, International Journal of Mechanical Sciences, vol.45, issue.5, pp.797-811, 2003.
DOI : 10.1016/S0020-7403(03)00139-5

D. Banabic, H. Aretz, D. S. Comsa, and L. Paraianu, An improved analytical description of orthotropy in metallic sheets, International Journal of Plasticity, vol.21, issue.3, pp.493-512, 2005.
DOI : 10.1016/j.ijplas.2004.04.003

F. Barlat and O. Richmond, Prediction of tricomponent plane stress yield surfaces and associated flow and failure behavior of strongly textured f.c.c. polycrystalline sheets, Materials Science and Engineering, vol.95, pp.15-29, 1987.
DOI : 10.1016/0025-5416(87)90494-0

F. Barlat, J. C. Brem, J. W. Yoon, K. Chung, R. E. Dic et al., Plane stress yield function for aluminum alloy sheets???part 1: theory, International Journal of Plasticity, vol.19, issue.9, pp.1297-1319, 2003.
DOI : 10.1016/S0749-6419(02)00019-0

F. Barlat, D. J. Lege, and J. C. Brem, A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.7, pp.693-712, 1991.
DOI : 10.1016/0749-6419(91)90052-Z

F. Barlat, J. C. Brem, J. W. Yoon, R. E. Dick, S. H. Choi et al., Constitutive modelling for aluminum sheet forming simulations, Proceedings of the 8th International Symposium on Plasticity and its Current Applications, pp.591-593, 2000.

F. Barlat, H. Aretz, J. W. Yoon, M. E. Karabin, J. C. Brem et al., Linear transfomation-based anisotropic yield functions, International Journal of Plasticity, vol.21, issue.5, pp.1009-1039, 2005.
DOI : 10.1016/j.ijplas.2004.06.004

F. Barlat, J. W. Yoon, and O. Cazacu, On linear transformations of stress tensors for the description of plastic anisotropy, International Journal of Plasticity, vol.23, issue.5, pp.876-896, 2007.
DOI : 10.1016/j.ijplas.2006.10.001

D. M. Bates and D. G. Watts, Nonlinear regression analysis and its applications, 1988.
DOI : 10.1002/9780470316757

S. Belhabib, H. Haddadi, M. Gaspérini, and P. Vacher, Heterogeneous tensile test on elastoplastic metallic sheets: Comparison between FEM simulations and full-field strain measurements, International Journal of Mechanical Sciences, vol.50, issue.1, pp.14-21, 2008.
DOI : 10.1016/j.ijmecsci.2007.05.009

S. N. Benedict, R. Bhardwaj, P. Selvakumar, and M. Brieu, Mesures de déformation par corrélation d'image ?applications aux courbes limites de formage et à l'observation du phénomène Portevin Le Chatelier Development of a biaxial tensile test fixture for reinforced thermoplastic composites, Polymer Testing, vol.26, pp.154-161, 2003.

J. F. Bishop and R. Hill, A theory of the plastic distorsion of a polycrystalline aggregate under combined stress, Philosophical Magazine, vol.42, pp.414-427, 1951.

K. Bouabdallah, Caractérisation de l'effet Portevin-Le Chatelier dans les alliagesaluminium magnésium -Apport des techniques d'analyse d'images. these, 2006.

A. Gavrus, E. Massoni, and J. L. Chenot, An inverse analysis using a finite element model for identification of rheological parameters, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.1-4, 1996.
DOI : 10.1016/0924-0136(96)02369-2

J. C. Gelin, O. Ghouati, and R. Shahani, Modelling the plane strain compression test to obtain constitutive equations of aluminium alloys, International Journal of Mechanical Sciences, vol.36, issue.9, pp.773-796, 1994.
DOI : 10.1016/0020-7403(94)90009-4

G. Geymonat, F. Hild, P. E. Gill, W. Murray, and M. H. Wright, Identification of elastic parameters by displacement field measurement, CR Mécanique, 1981.

O. Ghouati and J. C. Gelin, An inverse approach for the identification of complex material behaviours Identification using Mixed Numerical Experimental Methods, pp.93-102, 1997.

O. Ghouati and J. Gelin, Identification of material parameters directly from metal forming processes, Journal of Materials Processing Technology, vol.80, issue.81, pp.560-564, 1998.
DOI : 10.1016/S0924-0136(98)00159-9

O. Ghouati and J. Gelin, A finite element-based identification method for complex metallic material behaviours, Computational Materials Science, vol.21, issue.1, pp.57-68, 2001.
DOI : 10.1016/S0927-0256(00)00215-9

M. Gotoh, A theory of plastic anisotropy based on a yield function of fourth order (plane stress state)???I, International Journal of Mechanical Sciences, vol.19, issue.9, pp.505-512, 1977.
DOI : 10.1016/0020-7403(77)90043-1

F. Gotoh and F. Ishise, A finite element analysis of rigid-plastic deformation of the flange in a deep-drawing process based on a fourth-degree yield function, International Journal of Mechanical Sciences, vol.20, issue.7, p.423, 1978.
DOI : 10.1016/0020-7403(78)90032-2

D. E. Green, K. W. Neale, S. R. Macewen, A. Makinde, and R. Perrin, Experimental investigation of the biaxial behaviour of an aluminum sheet, International Journal of Plasticity, vol.20, issue.8-9, pp.8-9, 2004.
DOI : 10.1016/j.ijplas.2003.11.012

M. Hendriks, Identification of the mechanical behavior of solid materials, Thèse de Doctorat, 1991.

F. Hendriks, D. Brokken, C. Oomens, D. Bader, and F. Baaijens, The relative contributions of different skin layers to the mechanical behavior of human skin in vivo using suction experiments, Medical Engineering & Physics, vol.28, issue.3, pp.28-31, 2006.
DOI : 10.1016/j.medengphy.2005.07.001

E. Héripré, M. Dexet, J. Crepin, L. Gelebart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, International Journal of Plasticity, vol.23, issue.9, pp.1512-1539, 2007.
DOI : 10.1016/j.ijplas.2007.01.009

R. Hill, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, issue.1033, pp.281-297, 1948.
DOI : 10.1098/rspa.1948.0045

R. Hill, Theoretical plasticity of textured aggregates, Mathematical Proceedings of the Cambridge Philosophical Society, vol.236, issue.01, pp.179-191, 1979.
DOI : 10.1016/0020-7403(66)90069-5

R. Hill, Constitutive modelling of orthotropic plasticity in sheet metals, Journal of the Mechanics and Physics of Solids, vol.38, issue.3, pp.405-417, 1990.
DOI : 10.1016/0022-5096(90)90006-P

R. Hill, A user-friendly theory of orthotropic plasticity in sheet metals, International Journal of Mechanical Sciences, vol.35, issue.1, pp.19-25, 1993.
DOI : 10.1016/0020-7403(93)90061-X

E. Hoffmann, Utilisation du logiciel Sisasoft Hosford, W. F., 1972. A;generalized isotropic yield function, Journal of Applied Mechanics, vol.39, pp.607-609, 2000.

W. Hu, Constitutive modeling of orthotropic sheet metals by presenting hardening-induced anisotropy, International Journal of Plasticity, vol.23, issue.4, pp.620-639, 2007.
DOI : 10.1016/j.ijplas.2006.08.004

P. Hu, Y. Q. Liu, and J. C. Wang, Numerical study of the flange earring of deep-drawing sheets with stronger anisotropy, International Journal of Mechanical Sciences, vol.43, issue.1, pp.279-296, 2001.
DOI : 10.1016/S0020-7403(99)00119-8

L. Huang, X. Sun, Y. Liu, and Z. Cen, Parameter identification for two-dimensional orthotropic material bodies by the boundary element method, Engineering Analysis with Boundary Elements, vol.28, issue.2, pp.109-121, 2004.
DOI : 10.1016/j.enganabound.2003.07.004

M. Iordache, Contribution à la simulation du processus de déformation plastique à froid des tôles, Thèse de doctorat, 2007.

J. Kajberg and G. Lindkvist, Characterisation of materials subjected to large strains by inverse modeling based on in-plane displacement fields, International Journal of Solids and Structures, issue.13, pp.41-3439, 2004.

J. Kajberg, K. G. Sundin, L. G. Melin, and P. Ståhle, High strain-rate tensile testing and viscoplastic parameter identification using microscopic high-speed photography, International Journal of Plasticity, vol.20, issue.4-5, pp.561-575, 2004.
DOI : 10.1016/S0749-6419(03)00041-X

B. S. Kang, A. S. Kobayashi, and D. Prost, Stable crack growth in aluminium tensile specimen, Experimental Mechanics, pp.234-245, 1987.

A. P. Karafillis and M. C. Boyce, A general anisotropic yield criterion using bounds and a transformation weighting tensor, Journal of the Mechanics and Physics of Solids, vol.41, issue.12, pp.1859-1886, 1993.
DOI : 10.1016/0022-5096(93)90073-O

A. Khalfallah, H. Salah, and A. Dogui, Anisotropic parameter identification using inhomogeneous tensile test, European Journal of Mechanics - A/Solids, vol.21, issue.6, pp.927-942, 2002.
DOI : 10.1016/S0997-7538(02)01246-9

A. Kobayashi, Handbook on Experimental Mechanics, Society for Experimental Mechanics, vol.2, 1993.

T. Kuwabara, S. Ikeda, and K. Kuroda, Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tension, Journal of Materials Processing Technology, vol.80, issue.81, pp.80-81, 1998.
DOI : 10.1016/S0924-0136(98)00155-1

T. Kuwabara and S. Ikeda, Measurement and analysis of work hardening of sheet steels subjected to plane strain tension. Tetsu-to-Hagané, pp.334-339, 2002.

T. Lagoda, E. Macha, and W. Bedkowski, A critical plane approach based on energy concepts: application to biaxial random tension-compression high-cycle fatigue regime, International Journal of Fatigue, vol.21, issue.5, pp.431-443, 1999.
DOI : 10.1016/S0142-1123(99)00003-1

F. Latourte, Identification des paramètres d'une loi élastoplastique de Prager et calcul de champ de contrainte dans des matériaux hétérogènes, 2007.

D. Lecompte, A. Smits, H. Sol, J. Vantomme, and D. Van-hemelrijck, Mixed numerical???experimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens, International Journal of Solids and Structures, vol.44, issue.5, pp.1643-1656, 2007.
DOI : 10.1016/j.ijsolstr.2006.06.050

J. Lee, J. Molimard, A. Vautrin, and Y. Surrel, Diffraction grating interferometers for mechanical characterisations of advanced fabric laminates, Optics & Laser Technology, vol.38, issue.1, pp.51-66, 2006.
DOI : 10.1016/j.optlastec.2004.10.002

URL : https://hal.archives-ouvertes.fr/hal-00293005

S. B. Lin and J. L. Ding, Experimental study of the plastic yielding of rolled sheet metals with the cruciform plate specimen, International Journal of Plasticity, vol.11, issue.5, pp.583-604, 1995.
DOI : 10.1016/S0749-6419(94)00024-7

Y. L. Liu and G. Fischer, In situ measurement of local strain in a metal matrix composite by the object grating technique, Scripta Materialia, vol.36, issue.10, pp.1187-1194, 1997.
DOI : 10.1016/S1359-6462(97)00013-4

P. Luo, Y. Chao, M. Sutton, and W. Peters, Accurate measurement of three-dimensional deformations in deformable and rigid bodies using computer vision, Experimental Mechanics, vol.31, issue.2, pp.123-132, 1993.
DOI : 10.1117/12.7976778

R. Mahnke and E. Stein, Parameter identification for viscoplastic models based on analytical derivatives of a least-squares functional and stability investigations, International Journal of Plasticity, vol.12, issue.4, pp.451-476, 1996.
DOI : 10.1016/S0749-6419(95)00016-X

R. Mahnken, A comprehensive study of a multiplicative elastoplasticity model coupled to damage including parameter identification, Computers & Structures, vol.74, issue.2, pp.179-200, 2000.
DOI : 10.1016/S0045-7949(98)00296-X

A. Makinde, Mise au point d'un dispositif original de traction biaxiale. Applications à l'étude expérimentale de l'écrouissage des métaux sous différents chemins de déformation, 1986.

A. Makinde and G. Ferron, Strain-hardening characteristics of aluminium-1050A, (70-30) brass and austenitic stainless steel under biaxial loading, Journal of Testing and Evaluation, vol.16, pp.461-469, 1988.

R. Makkouk, A. Maniatty, N. Zabaras, and K. Stelson, Finite element analysis of some inverse elasticity problems, J. of Eng. Mechanics, ASCE, vol.115, pp.1302-1316, 1989.

M. H. Meuwissen, C. W. Oomens, F. P. Baaijens, R. Petterson, and J. D. Janssen, Determination of the elasto-plastic properties of aluminium using a mixed numerical???experimental method, Journal of Materials Processing Technology, vol.75, issue.1-3, pp.204-211, 1998.
DOI : 10.1016/S0924-0136(97)00366-X

C. Miehe and J. Schotte, Anisotropic finite elastoplastic analysis of shells: simulation of earing in deep-drawing of single- and polycrystalline sheets by Taylor-type micro-to-macro transitions, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.1-2, pp.25-57, 2004.
DOI : 10.1016/j.cma.2003.07.012

L. P. Moreira, G. Ferron, and G. Ferran, Experimental and numerical analysis of the cup drawing test for orthotropic metal sheets, Journal of Materials Processing Technology, vol.108, issue.1, pp.78-86, 2000.
DOI : 10.1016/S0924-0136(00)00660-9

L. P. Moreira and G. Ferron, Influence of the plasticity model in sheet metal forming simulations, Journal of Materials Processing Technology, vol.155, issue.156, pp.155-156, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.269

W. Müller and K. Pöhlandt, New experiments for determining yield loci of sheet metal, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.1-4, 1996.
DOI : 10.1016/0924-0136(96)02399-0

S. F. Nielsen, H. F. Poulsen, F. Beckmann, C. Thorning, and J. A. Wert, Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron Xray absorption microtomography, Acta Materialia, issue.8, pp.512407-2415, 2003.

I. Nistor, Identification expérimentale et simulation numérique de l'endommagement en dynamique rapide : application aux structures aéronautiques, 2005.

Y. Ohtake, S. Rokugawa, and H. Masumoto, Geometry Determination of Cruciform-Type Specimen and Biaxial Tensile Test of C/C Composites, Key Engineering Materials, vol.164, issue.165, 1999.
DOI : 10.4028/www.scientific.net/KEM.164-165.151

Y. Pannier, Identification de paramètres élastoplastiques par des essais statiquement indéterminés, Mise en oeuvre expérimentale et validation de la méthode des champs virtuels, 2006.

D. Thèse-de, Ecole Nationale Supérieure d'Arts et Métiers

V. Pegada, Y. Chun, and S. Santhanam, An algorithm for determining the optimal blank shape for the deep drawing of aluminum cups, Journal of Materials Processing Technology, vol.125, issue.126, pp.125-126
DOI : 10.1016/S0924-0136(02)00382-5

M. Rabahallah, T. Balan, S. Bouvier, B. Bacroix, F. Barlat et al., Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction, International Journal of Plasticity, vol.25, issue.3, pp.491-512, 2008.
DOI : 10.1016/j.ijplas.2008.03.006

E. F. Rauch, Plastic anisotropy of sheet metals determined by simple shear tests, Materials Science and Engineering: A, vol.241, issue.1-2, pp.179-183, 1998.
DOI : 10.1016/S0921-5093(97)00486-3

A. Samir, A. Simon, A. Scholz, and C. Berger, Service-type creep-fatigue experiments with cruciform specimens and modelling of deformation, International Journal of Fatigue, vol.28, issue.5-6, pp.643-651, 2006.
DOI : 10.1016/j.ijfatigue.2005.08.010

D. Schnur and N. Zabaras, An inverse method for determining elastic material properties and a material interface, International Journal for Numerical Methods in Engineering, vol.1, issue.10, pp.2039-2057, 1992.
DOI : 10.1115/1.3151899

J. Serri, Caractérisation expérimentale et modélisation du comportement plastique d'aciers à transformation martensitique. Applications à la mise en forme, 2005.

P. Smigielski, Interférométrie de speckle, pp.331-332, 2001.

E. Soppa, P. Doumalin, P. Binkele, T. Wiesendanger, M. Bornert et al., Experimental and numerical characterisation of in-plane deformation in two-phase materials, Computational Materials Science, vol.21, issue.3, pp.261-275, 2001.
DOI : 10.1016/S0927-0256(01)00170-7

URL : https://hal.archives-ouvertes.fr/hal-00111335

Y. Surrel, Les techniques optiques de mesure de champ: essai de classification. Instrumentation mesure et métrologie, pp.3-4, 2005.

Y. Surrel, La technique de la grille et ses applications Instrumentation mesure et métrologie, pp.3-4, 2005.

P. Synnergren and M. Sjoedahl, A stereoscopic digital speckle photography system for 3-D displacement field measurements, Optics and Lasers in Engineering, vol.31, issue.6, pp.425-438, 1999.
DOI : 10.1016/S0143-8166(99)00040-8

D. Szeliga, P. Matuszyk, R. Kuziak, and M. Pietrzyk, Identification of rheological parameters on the basis of various types of plastometric tests, Journal of Materials Processing Technology, vol.125, issue.126, pp.125-126, 2002.
DOI : 10.1016/S0924-0136(02)00366-7

G. I. Taylor, Plastic strain in metals, J. Inst. Metals, vol.62, pp.307-324, 1938.

S. G. Touchal-mguil, Une technique de corrélation directe d'images numériques : application a la détermination des courbes limites de formage et proposition d'un critère de strictionTexture and earing in deep drawing of aluminium, These de doctorat, pp.275-286, 1961.

R. H. Wagoner, Comparison of plane-strain and tensile work hardening in two sheet steel alloys, Metallurgical Transactions A, vol.51, issue.5, pp.877-882, 1981.
DOI : 10.1007/BF02648510

J. S. Welsh and D. F. Adams, An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens, Composites Part A: Applied Science and Manufacturing, vol.33, issue.6, pp.829-839, 2002.
DOI : 10.1016/S1359-835X(01)00142-7

J. S. Welsh, J. S. Mayes, D. F. Adams, and C. Biskner, -D biaxial testing and failure predictions of IM7/977-2 carbon/epoxy quasi-isotropic laminates, Composite Structures, pp.60-66, 2002.

J. Woodthorpe and R. Pearce, The anomalous behaviour of aluminium sheet under balanced biaxial tension, International Journal of Mechanical Sciences, vol.12, issue.4, pp.341-347, 1970.
DOI : 10.1016/0020-7403(70)90087-1

L. X. Yang, W. Steinchen, M. Schuth, and G. Kupfer, Precision measurement and non-destructive testing by means of digital phase shifting speckle pattern and speckle pattern shearing interferometry, Measurement, issue.3, pp.16149-160, 1995.

J. W. Yoon, F. Barlat, R. E. Dick, and M. E. Karabin, Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function, International Journal of Plasticity, vol.22, issue.1, pp.174-193, 2006.
DOI : 10.1016/j.ijplas.2005.03.013

J. W. Yoon, I. S. Song, D. Y. Yang, K. Chung, and F. Barlat, Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system, International Journal of Mechanical Sciences, vol.37, issue.7, pp.733-752, 1994.
DOI : 10.1016/0020-7403(95)00003-G

F. Yoshida, M. Urabe, and V. V. Toropov, Identification of mechanical properties of component layers in a bimetallic sheet by mixed experimental-numerical approach, Inverse Problems in Engineering Mechanics, pp.243-252, 1998.
DOI : 10.1016/B978-008043319-6/50029-7

A. M. Zaky, A. B. Nassr, and M. G. El-sebaie, Optimum blank shape of cylindrical cups in deep drawing of anisotropic sheet metals, Journal of Materials Processing Technology, vol.76, issue.1-3, pp.203-211, 1998.
DOI : 10.1016/S0924-0136(97)00349-X

K. M. Zhao and J. K. Lee, Inverse estimation of material properties for sheet metals, Communications in Numerical Methods in Engineering, vol.21, issue.2, pp.105-118, 2004.
DOI : 10.1002/nme.1620210813