F. Banhart, Strains in crystals with amorphous surface films studied by convergent beam electron diffraction and high-resolution imaging, Ultramicroscopy, vol.56, issue.4, p.233, 1994.
DOI : 10.1016/0304-3991(94)90011-6

R. Balboni, S. Frabboni, A. Armigliato, ]. J. Bauch, J. Brechbühl et al., Advances in X-ray, Philos. Mag. A Analysis Cryst. Res. Technol, vol.77, issue.42, pp.67-83, 1998.

A. Béché, J. L. Rouvière, L. Clément, and J. M. Hartmann, Improved precision in strain measurement using nanobeam electron diffraction, Applied Physics Letters, vol.12, issue.12, p.123114, 2009.
DOI : 10.1051/mmm:0199100202-3031500

P. R. Bevington, Data Reduction and Error Analysis for the Physical Sciences, Computers in Physics, vol.7, issue.4, 1969.
DOI : 10.1063/1.4823194

A. Chuvilin and U. Kaiser, On the peculiarities of CBED pattern formation revealed by multislice simulation, Ultramicroscopy, vol.104, issue.1, pp.73-82, 2004.
DOI : 10.1016/j.ultramic.2005.03.003

L. Clément, R. Pantel, L. F. Tz, and . Kwakman, Strain measurements by convergent-beam electron diffraction: The importance of stress relaxation in lamella preparations, Applied Physics Letters, vol.9, issue.4, p.651, 2004.
DOI : 10.1017/S1431927602010036

P. Colomban, Spectroscopie Raman des composites renforcés par des fibres à hautes performances (C, SiC?), in: Spectroscopie Raman en chimie et physique des matériaux, Ecole CNRS, 27 sept.-3 oct, pp.16-1981, 1998.

J. M. Cowley, Diffraction Physics, North-Holland, 1981.

I. De-wolf, V. Senez, R. Balboni, A. Armigliato, S. Frabboni et al., Techniques for mechanical strain analysis in sub-micrometer structures: TEM/CBED, micro-Raman spectroscopy, X-ray micro-diffraction and modeling, Microelectronic Engineering, vol.70, issue.2-4, pp.425-435, 1994.
DOI : 10.1016/S0167-9317(03)00372-1

C. Deininger, G. Necker, and J. Mayer, Determination of structure factors, lattice strains and accelerating voltage by energy-filtered convergent beam electron diffraction, Ultramicroscopy, vol.54, issue.1, pp.15-30, 1992.
DOI : 10.1016/0304-3991(94)90089-2

X. F. Duan, /Si strained???layer superlattices, Applied Physics Letters, vol.51, issue.17, pp.2247-2249, 1995.
DOI : 10.1063/1.113181

F. Houdellier, C. Roucau, L. Clément, J. L. Rouvière, and M. J. Casanove, Quantitative analysis of HOLZ line splitting in CBED patterns of epitaxially strained layers, Ultramicroscopy, vol.106, issue.10, pp.951-959, 2006.
DOI : 10.1016/j.ultramic.2006.04.011

URL : https://hal.archives-ouvertes.fr/hal-01707838

M. Hÿtch, F. Houdellier, F. Hüe, and E. Snoeck, Nanoscale holographic interferometry for strain measurements in electronic devices, Nature, vol.64, issue.7198, pp.1086-1089, 1962.
DOI : 10.1038/nature07049

V. Ji, Contribution à l'analyse par diffraction des rayons X de l'état microstructural et mécanique des matériaux hétérogènes, Habilitation à Diriger des Recherches, 1994.

Y. P. Lin, D. M. Bird, and R. Vincent, Errors and correction term for holz line simulations, Ultramicroscopy, vol.27, issue.3, pp.233-240, 1947.
DOI : 10.1016/0304-3991(89)90016-8

K. Lonsdale, Divergent-Beam X-Ray Photography of Crystals, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.240, issue.817, p.219, 1947.
DOI : 10.1098/rsta.1947.0002

H. J. Maier, R. R. Keller, H. Renner, H. Mughrabi, and A. Preston, On the unique evaluation of local lattice parameters by convergent-beam electron diffraction, Philosophical Magazine A, vol.31, issue.1, pp.23-43, 1993.
DOI : 10.1016/0304-3991(92)90110-6

J. Mansfield, D. Bird, and M. Saunders, Thickness dependence of higher-order Laue zone line positions at strongly dynamic zone axes, Ultramicroscopy, vol.48, issue.1-2, pp.1-11, 1993.
DOI : 10.1016/0304-3991(93)90166-U

C. Maurice and R. Fortunier, A 3D Hough transform for indexing EBSD and Kossel patterns, Journal of Microscopy, vol.524, issue.3, pp.520-529, 2008.
DOI : 10.1016/j.ultramic.2006.10.006

URL : https://hal.archives-ouvertes.fr/emse-00498510

A. Morawiec, Formal conditions for unambiguous residual strain determination by CBED, Philosophical Magazine, vol.85, issue.15, pp.1611-1623, 2005.
DOI : 10.1016/0956-7151(92)90277-L

A. Morawiec, An algorithm for refinement of lattice parameters using CBED patterns, Ultramicroscopy, vol.107, issue.4-5, pp.390-395, 2007.
DOI : 10.1016/j.ultramic.2006.10.003

A. Morawiec, A program for refinement of lattice parameters based on multiple convergent-beam electron diffraction patterns, Journal of Applied Crystallography, vol.40, issue.3, pp.618-622, 1995.
DOI : 10.1107/S0021889807018262

J. P. Morniroli, Diffraction électronique en faisceau convergent à grand angle : applications aux défauts cristallins. Monographie de la société française de microscopie, 1998.

J. P. Morniroli, Formation "Diffraction électronique appliquée à la caractérisation des matériaux, 1986.

B. Ortner, Advances en X-Ray Analysis, 1986.

B. Ortner, Advances en X-Ray Analysis, pp.387-394, 1986.

R. Pesci, K. Inal, S. Berveiller, E. Patoor, J. S. Lecomte et al., 18 ème Congrès Français de Mécanique ? Grenoble août, S173-S193 [Rozeveld-1993] S.J. Rozeveld, J.M. Howe, pp.41-56, 1992.

V. Senez, A. Armigliato, I. De-wolf, G. Carnevale, R. Balboni et al., Strain determination in silicon microstructures by combined convergent beam electron diffraction, process simulation, and micro-Raman spectroscopy, SIS@net] Soft Imaging System GmbH, pp.5574-5583, 2003.
DOI : 10.1002/(SICI)1521-4001(199904)79:4<281::AID-ZAMM281>3.0.CO;2-V

P. A. Stadelmann, EMS - a software package for electron diffraction analysis and HREM image simulation in materials science, Ultramicroscopy, vol.21, issue.2, p.131, 1987.
DOI : 10.1016/0304-3991(87)90080-5

A. Toda, N. Ikarashi, and H. Ono, Local lattice strain measurements in semiconductor devices by using convergent-beam electron diffraction, Journal of Crystal Growth, vol.210, issue.1-3, pp.341-345, 1994.
DOI : 10.1016/S0022-0248(99)00707-1

Y. Tomokiyo, S. Matsumura, T. Okuyama, T. Yasunage, N. Kuwano et al., Dynamical diffraction effect on HOLZ-pattern geometry in Si-Ge alloys and determination of local lattice parameter, Ultramicroscopy, vol.54, issue.2-4, pp.276-285, 1993.
DOI : 10.1016/0304-3991(94)90127-9

K. Usada, T. Numata, and S. Takagi, Strain evaluation of strained-Si layers on SiGe by the nano-beam electron diffraction (NBD) method, Materials Science in Semiconductor Processing, vol.8, issue.1-3, pp.155-159, 1968.
DOI : 10.1016/j.mssp.2004.09.105

]. S. Villert-2009, C. Villert, C. Maurice, R. Wyon, and . Fortunier, Accuracy assessment of elastic strain measurement by EBSD, Journal of Microscopy, vol.107, issue.2, pp.290-301, 1998.
DOI : 10.1093/oxfordjournals.jmicro.a023810

R. Völkl, U. Glatzel, and M. Feller-kniepmeier, Measurement of the Unconstrained Misfit in the Nickel-Base Superalloy CMSX-4 With CBED, Scripta Materialia, vol.38, issue.6, pp.893-900, 1996.
DOI : 10.1016/S1359-6462(97)00559-9

A. J. Wilkinson, Measurement of elastic strains and small lattice rotations using electron back scatter diffraction, Ultramicroscopy, vol.62, issue.4, pp.237-247, 1996.
DOI : 10.1016/0304-3991(95)00152-2

A. J. Wilkinson, G. Meaden, and D. J. Dingley, High-resolution elastic strain measurement from electron backscatter diffraction patterns: New levels of sensitivity, Ultramicroscopy, vol.106, issue.4-5, pp.307-313, 1998.
DOI : 10.1016/j.ultramic.2005.10.001

R. Wittmann, C. Parzinger, and D. Gerthsen, Quantitative determination of lattice parameters from CBED patterns: accuracy and performance, Ultramicroscopy, vol.70, issue.3, pp.145-159, 1998.
DOI : 10.1016/S0304-3991(97)00107-1

D. Bijl and H. Pullman, A new method for measuring the thermal expansion of solids at low temperatures; the thermal expansion of copper and aluminium and the Gr??neisen rule, Physica, vol.21, issue.1-5, p.285, 1955.
DOI : 10.1016/S0031-8914(54)91674-2

. Ère-conférence-européenne, Adavanced Materials and Processes " ? EUROMAT 1989 ? Aachen, pp.333-338, 1986.

]. R. Develay and . Develay, Traitements thermiques des alliages d'aluminium

D. Eyidi, C. Hébert, and P. Schattschneider, Short note on parallel illumination in the TEM, Ultramicroscopy, vol.106, issue.11-12, pp.1144-1149, 1965.
DOI : 10.1016/j.ultramic.2006.04.029

B. F. Figgins, G. O. Jones, and D. P. Riley, LXXVII. The thermal expansion of aluminium at low temperatures as measured by an X-ray diffraction method, Philosophical Magazine, vol.37, issue.8, p.747, 1965.
DOI : 10.1088/0959-5309/53/3/305

J. J. Fundenberger, A. Morawiec, E. Bouzy, and J. S. Lecomte, Polycrystal orientation maps from TEM, Ultramicroscopy, vol.96, issue.2, pp.127-137, 1958.
DOI : 10.1016/S0304-3991(02)00435-7

URL : https://hal.archives-ouvertes.fr/hal-00111702

A. Hazotte, T. Grosdidier, and S. Denis, ????? Precipitate splitting in Nickel-based superalloys: A 3-D finite element analysis, Scripta Materialia, vol.34, issue.4, pp.601-608, 1996.
DOI : 10.1016/1359-6462(95)00554-4

G. N. Kamm and G. A. , Low???Temperature Elastic Moduli of Aluminum, Journal of Applied Physics, vol.35, issue.2, pp.327-330, 1964.
DOI : 10.1103/PhysRev.116.1121

Y. P. Lin, D. M. Bird, and R. Vincent, Errors and correction term for holz line simulations, Ultramicroscopy, vol.27, issue.3, pp.233-240, 1977.
DOI : 10.1016/0304-3991(89)90016-8

A. Morawiec, Formal conditions for unambiguous residual strain determination by CBED, Philosophical Magazine, vol.85, issue.15, pp.1611-1623, 2005.
DOI : 10.1016/0956-7151(92)90277-L

A. Morawiec and J. , A program for refinement of lattice parameters based on multiple convergent-beam electron diffraction patterns, Journal of Applied Crystallography, vol.40, issue.3, pp.618-622, 2007.
DOI : 10.1107/S0021889807018262

A. Armigliato, R. Balboni, S. Balboni, S. Frabboni, A. Tixier et al., TEM/CBED determination of strain in silicon-based submicrometric electronic devices, Micron, vol.31, issue.3, pp.203-209, 1994.
DOI : 10.1016/S0968-4328(99)00084-0

C. Deininger, G. Necker, and J. Mayer, Determination of structure factors, lattice strains and accelerating voltage by energy-filtered convergent beam electron diffraction, Ultramicroscopy, vol.54, issue.1, pp.15-30, 1994.
DOI : 10.1016/0304-3991(94)90089-2

F. Houdellier, D. Jacob, M. J. Casanove, and C. Roucau, Effect of sample bending on diffracted intensities observed in CBED patterns of plan view strained samples, Ultramicroscopy, vol.108, issue.4, pp.295-301, 2004.
DOI : 10.1016/j.ultramic.2007.04.003

URL : https://hal.archives-ouvertes.fr/hal-01707829

Y. P. Lin, D. M. Bird, and R. Vincent, Errors and correction term for holz line simulations, Ultramicroscopy, vol.27, issue.3, pp.233-240, 1977.
DOI : 10.1016/0304-3991(89)90016-8

A. Morawiec, Formal conditions for unambiguous residual strain determination by CBED, Philosophical Magazine, vol.85, issue.15, pp.1611-1623, 2005.
DOI : 10.1016/0956-7151(92)90277-L

J. C. Spence and J. M. Zuo, Electron Microdiffraction, 1979.

J. W. Hren, J. I. Goldstein-&-d, and . Joy, Steeds, Introduction to Analytical Electron Microscopy, pp.387-422, 2000.

A. Toda, N. Ikarashi, and H. Ono, Local lattice strain measurements in semiconductor devices by using convergent-beam electron diffraction, Journal of Crystal Growth, vol.210, issue.1-3, pp.341-345, 1996.
DOI : 10.1016/S0022-0248(99)00707-1

D. B. Williams and C. B. Carter, Transmission Electron Microscopy, 1996.

R. Wittmann, C. Parzinger, and D. Gerthsen, Quantitative determination of lattice parameters from CBED patterns: accuracy and performance, Ultramicroscopy, vol.70, issue.3, pp.145-159, 1992.
DOI : 10.1016/S0304-3991(97)00107-1

J. M. Zuo, Automated lattice parameter measurement from HOLZ lines and their use for the measurement of oxygen content in YBa2Cu3O7-?? from nanometer-sized region, Ultramicroscopy, vol.41, issue.1-3, pp.211-223, 1992.
DOI : 10.1016/0304-3991(92)90110-6

D. Blavette, E. Cadel, C. Pareige, B. Deconihout, and P. Caron, Phase Transformation and Segregation to Lattice Defects in Ni-Base Superalloys, Microscopy and Microanalysis, vol.65, issue.06, pp.464-483, 1983.
DOI : 10.1016/S0036-9748(88)80106-6

L. Clément, R. Pantel, L. F. Tz, J. L. Kwakman, and . Rouvière, Strain measurements by convergent-beam electron diffraction: The importance of stress relaxation in lamella preparations, Applied Physics Letters, vol.9, issue.4, p.651, 2004.
DOI : 10.1017/S1431927602010036

A. Hazotte, A. Racine, and S. Denis, Journal de Physique IV, colloque C1, pp.1-119, 1996.

A. Hazotte, Sur les contraintes de cohérence dans les superalliages monocristallins ? Parcours personnel et synthèse bibliographique, Habilitation à Diriger des Recherches, 1969.

D. F. Lahrman, R. D. Field, R. Darolia, and H. L. Fraser, Investigation of techniques for measuring lattice mismatch in a rhenium containing nickel base superalloy, Acta Metallurgica, vol.36, issue.5, pp.1309-1320, 1988.
DOI : 10.1016/0001-6160(88)90283-0

D. Mukherji and R. P. Wahi, On the measurement of lattice mismatch between ?? and ????? phases in nickel-base superalloys by CBED technique, Scripta Materialia, vol.35, issue.1, pp.117-122, 1996.
DOI : 10.1016/1359-6462(96)00092-9

D. Mukherji and R. P. Wahi, On the nature of lattice distortion near the ??/????? interfaces in nickel-base superalloys, Scripta Materialia, vol.36, issue.11, pp.1233-1238, 1983.
DOI : 10.1016/S1359-6462(97)00033-X

M. V. Nathal and L. J. Ebert, Gamma prime shape changes during creep of a nickel-base superalloy, Scripta Metallurgica, vol.17, issue.9, pp.1151-1154, 1983.
DOI : 10.1016/0036-9748(83)90472-6

M. V. Nathal, R. A. Mac, and . Kay, The stability of lamellar ??-????? structures, Materials Science and Engineering, vol.85, pp.127-138, 1987.
DOI : 10.1016/0025-5416(87)90474-5

E. Nembach, Particles strengthening of metals and alloys, 1988.

K. Ohno, H. Harada, T. Yamataga, and M. Yamazaki, X-ray diffractometric measurement of lattice misfit between .GAMMA. and .GAMMA.' phase in Ni-base superalloys., Transactions of the Iron and Steel Institute of Japan, vol.28, issue.3, pp.218-221, 1980.
DOI : 10.2355/isijinternational1966.28.218

Y. Y. Qiu, Measurement of lattice strains in a Ni???Al???Mo alloy using convergent-beam electron diffraction, Journal of Alloys and Compounds, vol.234, issue.1, pp.157-166, 1995.
DOI : 10.1016/0925-8388(95)02082-9

A. Racine-kirsch and T. , Instabilité chimique et morphologique des précipités gamma' lors d'essais de fluage de superalliages monocristallins à base nickel, 1993.

C. Schulze and M. Feller-kniepmeier, Transmisson electron microscopy of phase composition and lattice misfit in the Re-containing nickel-base superalloy CMSX-10, Materials Science and Engineering: A, vol.281, issue.1-2, pp.204-212, 2000.
DOI : 10.1016/S0921-5093(99)00713-3

K. Usada, T. Numata, T. Tezuka, N. Sugiyama, Y. Moriyama et al., Strain evaluation for thin strained-Si on SGOI and strained-Si on nothing (SSON) structures using nanobeam electron diffraction, IEEE International SOI Conference Proceeding, p.138, 2003.

K. Usada, T. Numata, and S. Takagi, Strain evaluation of strained-Si layers on SiGe by the nano-beam electron diffraction (NBD) method, Materials Science in Semiconductor Processing, vol.8, issue.1-3, pp.155-159, 2005.
DOI : 10.1016/j.mssp.2004.09.105

M. Hÿtch, F. Houdellier, F. Hüe, and E. Snoeck, Nanoscale holographic interferometry for strain measurements in electronic devices, Nature, vol.64, issue.7198, pp.1086-1089, 2008.
DOI : 10.1038/nature07049

A. Béché, J. L. Rouvière, L. Clément, and J. M. Hartmann, Improved precision in strain measurement using nanobeam electron diffraction, Applied Physics Letters, vol.12, issue.12, p.123114, 2009.
DOI : 10.1051/mmm:0199100202-3031500

F. Hüe, M. Hÿtch, F. Houdellier, H. Bender, and A. Claverie, Strain mapping of tensiley strained silicon transistors with embedded Si1???yCy source and drain by dark-field holography, Applied Physics Letters, vol.2007, issue.7, p.73103, 2009.
DOI : 10.1063/1.3116648

L. Clément, R. Pantel, L. F. Tz, J. L. Kwakman, and . Rouvière, Strain measurements by convergent-beam electron diffraction: The importance of stress relaxation in lamella preparations, Applied Physics Letters, vol.9, issue.4, pp.651-653, 2004.
DOI : 10.1017/S1431927602010036

F. Houdellier, C. Roucau, L. Clément, J. L. Rouvière, and M. J. Casanove, Quantitative analysis of HOLZ line splitting in CBED patterns of epitaxially strained layers, Ultramicroscopy, vol.106, issue.10, pp.951-959, 2006.
DOI : 10.1016/j.ultramic.2006.04.011

URL : https://hal.archives-ouvertes.fr/hal-01707838

P. M. Jones, G. M. Rackham, and J. W. , Steeds, HOLZ effects in electron diffraction and their use in lattice parameter determination, Proc. R. Soc. Lond. A, pp.354-197, 1977.

J. M. Zuo, Automated lattice parameter measurement from HOLZ lines and their use for the measurement of oxygen content in YBa2Cu3O7-?? from nanometer-sized region, Ultramicroscopy, vol.41, issue.1-3, pp.211-223, 1992.
DOI : 10.1016/0304-3991(92)90110-6

S. J. Rozeveld and J. M. Howe, Determination of multiple lattice parameters from convergent-beam electron diffraction patterns, Ultramicroscopy, vol.50, issue.1, pp.41-56, 1993.
DOI : 10.1016/0304-3991(93)90089-G

M. Kim, J. M. Zuo, and G. S. Park, High-resolution strain measurement in shallow trench isolation structures using dynamic electron diffraction, Applied Physics Letters, vol.84, issue.12, pp.2181-2183, 2004.
DOI : 10.1080/01418619308219387

J. M. Cowley, Electron microdiffraction studies of the potential field at crystal surfaces, Diffraction Physics, 1981.

A. Morawiec, A program for refinement of lattice parameters based on multiple convergent-beam electron diffraction patterns, Journal of Applied Crystallography, vol.40, issue.3, pp.618-6222, 2007.
DOI : 10.1107/S0021889807018262

R. Wittmann, C. Parzinger, and D. Gerthsen, Quantitative determination of lattice parameters from CBED patterns: accuracy and performance, Ultramicroscopy, vol.70, issue.3, pp.145-159, 1998.
DOI : 10.1016/S0304-3991(97)00107-1

S. Krämer and J. Mayer, Using the Hough transform for HOLZ line identification in convergent beam electron diffraction, Journal of Microscopy, vol.194, issue.1, pp.2-11, 1999.
DOI : 10.1046/j.1365-2818.1999.00475.x

A. Toda, N. Ikarashi, and H. Ono, Local lattice strain measurements in semiconductor devices by using convergent-beam electron diffraction, Journal of Crystal Growth, vol.210, issue.1-3, pp.341-345, 2000.
DOI : 10.1016/S0022-0248(99)00707-1

A. Pavia and . Marmiroli, TEM-CBED determination of strain in silicon-based submicrometric electronic devices, Micron, vol.31, pp.203-209, 2000.

H. J. Maier, R. R. Keller, H. Renner, H. Mughrabi, and A. Preston, On the unique evaluation of local lattice parameters by convergent-beam electron diffraction, Philosophical Magazine A, vol.31, issue.1, pp.23-43, 1996.
DOI : 10.1016/0304-3991(92)90110-6

A. Morawiec, Formal conditions for unambiguous residual strain determination by CBED, Philosophical Magazine, vol.85, issue.15, pp.1611-1623, 2005.
DOI : 10.1016/0956-7151(92)90277-L

K. G. Lyon, G. L. Salinger, C. A. Swenson, and G. K. White, Linear thermal expansion measurements on silicon from 6 to 340 K???, Journal of Applied Physics, vol.1, issue.3, pp.48-865, 1977.
DOI : 10.1007/BF00629120

F. Houdellier, D. Jacob, M. J. Casanove, and C. Roucau, Effect of sample bending on diffracted intensities observed in CBED patterns of plan view strained samples, Ultramicroscopy, vol.108, issue.4, pp.295-301, 2008.
DOI : 10.1016/j.ultramic.2007.04.003

URL : https://hal.archives-ouvertes.fr/hal-01707829

J. J. Fundenberger, A. Morawiec, E. Bouzy, and J. S. Lecomte, Polycrystal orientation maps from TEM, Ultramicroscopy, vol.96, issue.2, pp.127-137, 2003.
DOI : 10.1016/S0304-3991(02)00435-7

URL : https://hal.archives-ouvertes.fr/hal-00111702

D. V. Rao, A simple technique for the estimation of the voltage of a transmission electron microscope, Journal of Electron Microscopy, vol.56, issue.1-2, pp.1-4, 2008.
DOI : 10.1007/BF02708566

Y. P. Lin, D. M. Bird, and R. Vincent, Errors and correction term for holz line simulations, Ultramicroscopy, vol.27, issue.3, pp.233-240, 1989.
DOI : 10.1016/0304-3991(89)90016-8

C. Deininger, G. Necker, and J. Mayer, Determination of structure factors, lattice strains and accelerating voltage by energy-filtered convergent beam electron diffraction, Ultramicroscopy, vol.54, issue.1, pp.15-30, 1994.
DOI : 10.1016/0304-3991(94)90089-2

S. Krämer, J. Mayer, C. Witt, A. Weickenmeier, and M. Rühle, Analysis of local strain in aluminium interconnects by energy filtered CBED, Ultramicroscopy, vol.81, issue.3-4, pp.245-262, 2000.
DOI : 10.1016/S0304-3991(99)00191-6

F. Houdellier, A. Altibelli, C. Raucau, and M. J. Casanove, New approach for the dynamical simulation of CBED patterns in heavily strained specimens, Ultramicroscopy, vol.108, issue.5, pp.426-432, 2008.
DOI : 10.1016/j.ultramic.2007.06.002

URL : https://hal.archives-ouvertes.fr/hal-01741992

F. Z. Marai and T. Mulvey, Scherzer's formula and the correction of spiral distortion in the electron microscope, Ultramicroscopy, vol.2, pp.187-192, 1977.
DOI : 10.1016/S0304-3991(76)91130-X