T. H. Childs, Metal Machining Theory and applications, 2000.

H. Tresca, On further applications of the flow of solids, Proc. I. Mech. Eng. London, pp.301-345, 1878.

A. Mallock, The action of cutting tools, Proc. Roy. Soc. London, vol.33, pp.1881-82

F. W. Taylor, On the art of cutting metals, Trans. ASME, vol.28, pp.31-350, 1907.

M. E. Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.44, issue.5, pp.267-275, 1945.
DOI : 10.1063/1.1714987

M. E. Merchant, Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting, Journal of Applied Physics, vol.27, issue.6, pp.318-324, 1945.
DOI : 10.1103/PhysRev.48.825

M. Bäker, Does chip formation minimize the energy?, Computational Materials Science, vol.33, issue.4, pp.407-418, 2005.
DOI : 10.1016/j.commatsci.2004.08.007

A. Molinari and A. Moufki, The Merchant's model of orthogonal cutting revisited: A new insight into the modeling of chip formation, International Journal of Mechanical Sciences, vol.50, issue.2, 2007.
DOI : 10.1016/j.ijmecsci.2007.07.015

E. H. Lee and B. W. Shaffer, The theory of plasticity applied to a problem of machining, J. Appl. Mech, vol.18, p.405, 1951.

P. L. Oxley, Mechanics of machining, 1989.

H. Kudo, Some new slip-line solutions for two-dimensional steady-state machining, International Journal of Mechanical Sciences, vol.7, issue.1, pp.43-55, 1965.
DOI : 10.1016/0020-7403(65)90084-6

P. Dewhurst, On the Non-Uniqueness of the Machining Process, Proc. R. Soc. Lond. A360, pp.587-610, 1978.
DOI : 10.1098/rspa.1978.0087

E. Usui and H. Takeyama, A Photoelastic Analysis of Machining Stresses, Journal of Engineering for Industry, vol.82, issue.4, p.303, 1960.
DOI : 10.1115/1.3664233

N. Zorev, Interrelationship between shear processes occurring along tool face and on shear plane in metal cutting, Proceedings of the Conference on International Research in Production Engineering, ASME, pp.42-49, 1963.

T. H. Childs and M. I. Mahdi, On the Stress Distribution Between the Chip and Tool During Metal Turning, CIRP Annals, vol.38, issue.1, p.55, 1989.
DOI : 10.1016/S0007-8506(07)62651-1

L. C. Lee, X. D. Liu, and K. Y. Lam, Determination of stress distribution on the tool rake face using a composite tool, International Journal of Machine Tools and Manufacture, vol.35, issue.3, pp.373-382, 1995.
DOI : 10.1016/0890-6955(94)E0020-J

O. C. Zienkiewicz, The finite element method in Engineering Science, 1971.

Y. Kakino, Analysis of the mechanism of orthogonal machining by the finite element methode, J. Japan Soc. Prec. Eng, vol.37, issue.7, pp.503-508, 1971.

T. Shirakashi and &. E. Usui, Simulation Analysis of Orthogonal Metal Cutting Process, Journal of the Japan Society of Precision Engineering, vol.42, issue.496, pp.340-345, 1976.
DOI : 10.2493/jjspe1933.42.340

J. S. Strenkowski and J. T. Carroll, A Finite Element Model of Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.107, issue.4, pp.346-354, 1985.
DOI : 10.1115/1.3186008

T. D. Marusich and M. Ortiz, Modelling and simulation of high-speed machining, International Journal for Numerical Methods in Engineering, vol.36, issue.18, pp.3675-3694, 1995.
DOI : 10.1007/BF02812022

M. Movahhedy, M. S. Gadala, and Y. Altintas, Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian???Eulerian finite-element method, Journal of Materials Processing Technology, vol.103, issue.2, pp.267-275, 2000.
DOI : 10.1016/S0924-0136(00)00480-5

M. S. Gadala, Recent trends in ALE formulation and its applications in solid mechanics, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.39-41, 2004.
DOI : 10.1016/j.cma.2004.02.019

H. Miguelez, R. Zaera, A. Rusinek, A. Moufki, and A. Molinari, Numerical modelling of orthogonal cutting: Influence of cutting conditions and separation criterion, Journal de Physique IV (Proceedings), vol.134, issue.134, pp.417-422, 2006.
DOI : 10.1051/jp4:2006134064

E. M. Trent and P. K. Wright, Metal Cutting, 2000.

M. C. Shaw, A. Ber, and P. A. Mamin, Friction Characteristics of Sliding Surfaces Undergoing Subsurface Plastic Flow, Journal of Basic Engineering, vol.82, issue.2, pp.342-346, 1960.
DOI : 10.1115/1.3662595

A. J. Moore, Deformation of Metals in Static and in Sliding Contact, Proc. R. Soc. London, pp.231-243, 1948.
DOI : 10.1098/rspa.1948.0116

T. Shirakashi and E. Usui, Frottement characteristics on tool face in metal machining, J. JSPE, vol.39, pp.966-972, 1973.

I. Finnie and M. C. Shaw, The frottement process in metal cutting, Trans. ASME J. Eng. Ind, pp.79-1649, 1956.

T. H. Childs, M. H. Dirikolu, and K. Maekawa, Modelling of frottement in the simulation of metal machining, In: 24th Leeds?Lyon Symposium on Tribology, pp.337-346, 1998.

S. Kobayashi and E. G. Thomsen, Some observations on the shearing process in the metal cutting, Trans ASME J. Eng. Ind, pp.81-251, 1959.

M. Bäker, Finite element simulation of high-speed cutting forces, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.117-126, 2006.
DOI : 10.1016/j.jmatprotec.2006.02.019

M. Bäker, Finite Element Simulation of Chip Formation, Shaker Verlag, 2004.

J. S. Strenkowski and K. J. Moon, Finite Element Prediction of Chip Geometry and Tool/Workpiece Temperature Distributions in Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.112, issue.4, pp.112-313, 1990.
DOI : 10.1115/1.2899593

P. J. Arrazola, D. Ugarte, and X. Domínguez, A new approach for the friction identification during machining through the use of finite element modeling, International Journal of Machine Tools and Manufacture, vol.48, issue.2, pp.173-183, 2008.
DOI : 10.1016/j.ijmachtools.2007.08.022

P. Albrecht, New developments in the theory of the metal-cutting process, Part 1, J. of Eng. Ind, pp.348-358, 1960.

T. H. Childs, Friction modelling in metal cutting, Wear, vol.260, issue.3, pp.310-318, 2006.
DOI : 10.1016/j.wear.2005.01.052

C. R. Liu and Y. B. Guo, Finite element analysis of the effect of sequential cuts and tool???chip friction on residual stresses in a machined layer, International Journal of Mechanical Sciences, vol.42, issue.6, pp.1069-1086, 2000.
DOI : 10.1016/S0020-7403(99)00042-9

G. Shi, X. Deng, and C. Shet, A finite element study of the effect of frottement in orthogonal metal cutting, Finite Element in Analysis and Design, pp.863-883, 2002.

T. H. Childs, Numerical experiments on the influence of material and other variables on plane strain continuous chip formation in metal machining, International Journal of Mechanical Sciences, vol.48, issue.3, pp.307-322, 2006.
DOI : 10.1016/j.ijmecsci.2005.09.012

K. P. Maity and N. S. Das, A slip-line solution to metal machining using a cutting tool with a step-type chip-breaker, Journal of Materials Processing Technology, vol.79, issue.1-3, pp.217-223, 1998.
DOI : 10.1016/S0924-0136(98)00015-6

A. J. Shih, Finite Element Simulation of Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.28, issue.1, pp.84-93, 1995.
DOI : 10.1115/1.3439413

H. Bil, S. E. Kiliç, and A. E. Tekkaya, A comparison of orthogonal cutting data from experiments with three different finite element models, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.933-944, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.016

L. Filice, F. Micari, S. Rizzuti, and D. Umbrello, A critical analysis on the frottement modelling in orthogonal machining, Inter, J. of Machine Tools and Manuf, vol.47, pp.3-4, 2007.

A. Devillez, S. Lesko, and W. Mozer, Cutting tool crater wear measurement with white light interferometry, Wear, vol.256, issue.1-2, pp.56-65, 2004.
DOI : 10.1016/S0043-1648(03)00384-3

G. Sutter and A. Molinari, Analysis of the Cutting Force Components and Friction in High Speed Machining, Metal machining theory and applications, pp.245-250, 2000.
DOI : 10.1115/1.3667587

]. H. Tresca, On further applications of the flow of solids, Proc. I. Mechanical Engineering, issue.2, pp.301-345, 1878.

]. A. Mallock, The action of cutting tools, Proc, pp.1881-82

]. F. Taylor, On the art of cutting metals, Trans. ASME, vol.28, issue.4, pp.31-350, 1907.

M. E. Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip, Journal of Applied Physics, vol.44, issue.5, pp.267-275, 1945.
DOI : 10.1063/1.1714987

M. E. Merchant, Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting, Journal of Applied Physics, vol.27, issue.6, pp.318-324, 1945.
DOI : 10.1103/PhysRev.48.825

A. Molinari and A. Moufki, The Merchant's model of orthogonal cutting revisited: A new insight into the modeling of chip formation, International Journal of Mechanical Sciences, vol.50, issue.2, pp.124-131, 2008.
DOI : 10.1016/j.ijmecsci.2007.07.015

E. H. Lee and B. W. Shaffer, The theory of plasticity applied to a problem of machining, J. Appl. Mech, vol.18, p.405, 1951.

P. L. Oxley, Mechanics of machining [11] H. Kudo, Some new slip-line solutions for two-dimensional steady-state machining, Inter, J. of Mechanical Science, vol.7, pp.43-55, 1965.

P. Dewhurst, On the Non-Uniqueness of the Machining Process, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.360, issue.1703, pp.587-610, 1978.
DOI : 10.1098/rspa.1978.0087

H. Takeyama and E. Usui, The effect of tool chip contact area in metal cutting, Trans ASME, vol.80, pp.1089-1096, 1958.

G. S. Andreev, Photoelastic study of stresses in a cutting tool by means of cinematography, Vestnik Mashinestroeniya, vol.5, pp.54-57, 1958.

E. Usui and H. Takeyama, A Photoelastic Analysis of Machining Stresses, Journal of Engineering for Industry, vol.82, issue.4, p.303, 1960.
DOI : 10.1115/1.3664233

N. N. Zorev, Interrelationship between shear processes occurring along tool face and on shear plane in metal cutting, Inter, pp.42-49, 1963.

S. Kato, Y. Yamaguchi, and M. Yamada, Stress Distribution at the Interface Between Tool and Chip in Machining, Journal of Engineering for Industry, vol.94, issue.2, pp.683-689, 1972.
DOI : 10.1115/1.3428229

T. H. Childs, M. I. Mahdi, and G. Barrow, On the Stress Distribution Between the Chip and Tool During Metal Turning, CIRP Annals, vol.38, issue.1, pp.55-58, 1989.
DOI : 10.1016/S0007-8506(07)62651-1

L. C. Lee, X. D. Liu, and K. Y. Lam, Determination of stress distribution on the tool rake face using a composite tool, International Journal of Machine Tools and Manufacture, vol.35, issue.3, pp.373-382, 1995.
DOI : 10.1016/0890-6955(94)E0020-J

S. C. Lim, M. F. Ashby, and J. H. Brunton, The effects of sliding conditions on the dry friction of metals, Acta Metallurgica, vol.37, issue.3, pp.767-772, 1989.
DOI : 10.1016/0001-6160(89)90003-5

S. Philippon, G. Sutter, and A. Molinari, An experimental study of friction at high sliding velocities, Wear, vol.257, issue.7-8, pp.777-784, 2004.
DOI : 10.1016/j.wear.2004.03.017

. Gilles, Identification of a friction model -Application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool, Inter, J. of Mach Tools and Manufacture, vol.48, pp.1211-1223, 2008.

J. Rech, C. Claudin, and E. D. Eramo, Identification of a friction model???Application to the context of dry cutting of an AISI 1045 annealed steel with a TiN-coated carbide tool, Tribology International, vol.42, issue.5, pp.738-744, 2009.
DOI : 10.1016/j.triboint.2008.10.007

F. Zemzemi, J. Rech, W. B. Salem, A. Dogui, and P. Kapsa, Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels, Journal of Materials Processing Technology, vol.209, issue.8, pp.3978-3990, 2009.
DOI : 10.1016/j.jmatprotec.2008.09.019

I. Finnie and M. C. Shaw, The friction process in metal cutting, ASME J. Engineering for Industry, vol.79, pp.1649-1657, 1956.

A. J. Moore, Deformation of Metals in Static and in Sliding Contact, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.195, issue.1041, pp.231-243, 1948.
DOI : 10.1098/rspa.1948.0116

M. C. Shaw, A. Ber, and P. A. Mamin, Friction Characteristics of Sliding Surfaces Undergoing Subsurface Plastic Flow, Journal of Basic Engineering, vol.82, issue.2, pp.342-346, 1960.
DOI : 10.1115/1.3662595

P. W. Wallace and G. Boothroyd, Tool Forces and Tool-Chip Friction in Orthogonal Machining, Journal of Mechanical Engineering Science, vol.78, issue.2, pp.74-87, 1964.
DOI : 10.1016/S0020-7403(62)80035-6

J. A. Bailey, Friction in metal machining???Mechanical aspects, Wear, vol.31, issue.2, pp.243-275, 1975.
DOI : 10.1016/0043-1648(75)90161-1

E. D. Doyle, J. G. Horne, and D. Tabor, Frictional Interactions between Chip and Rake Face in Continuous Chip Formation, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.366, issue.1725, pp.173-183, 1979.
DOI : 10.1098/rspa.1979.0046

T. H. Childs and G. W. Rowe, Physics in metal cutting, Reports on Progress in Physics, vol.36, issue.3, pp.223-288, 1973.
DOI : 10.1088/0034-4885/36/3/001

T. Shirakashi and E. Usui, Friction Characteristics on Tool Face in Metal Machining, Journal of the Japan Society of Precision Engineering, vol.39, issue.464, pp.966-972, 1973.
DOI : 10.2493/jjspe1933.39.966

T. H. Childs, M. H. Dirikolu, and K. Maekawa, Modelling of friction in the simulation of metal machining, 24th Leeds?Lyon Symposium on Tribology
DOI : 10.1016/S0167-8922(98)80089-8

S. Kobayashi and E. G. Thomsen, Some observations on the shearing process in the metal cutting, ASME J. Engineering for Industry, vol.81, pp.251-262, 1959.

P. Albrecht, New Developments in the Theory of the Metal-Cutting Process: Part I. The Ploughing Process in Metal Cutting, Journal of Engineering for Industry, vol.82, issue.4, pp.348-358, 1960.
DOI : 10.1115/1.3664242

M. Masuko, Fundamental Researches on the Metal Cutting (1st Report) : A New Analysis of Cutting Force, Transactions of the Japan Society of Mechanical Engineers, vol.19, issue.78, pp.32-39, 1953.
DOI : 10.1299/kikai1938.19.32

O. C. Zienkiewicz, The finite element method in Engineering Science, 1971.

Y. Kakino, Analysis of the mechanism of orthogonal machining by the finite element methode, J. Japan Soc. Prec. Eng, vol.37, issue.7, pp.503-508, 1971.

T. Shirakashi and E. Usui, Simulation Analysis of Orthogonal Metal Cutting Process, Journal of the Japan Society of Precision Engineering, vol.42, issue.496, pp.340-345, 1976.
DOI : 10.2493/jjspe1933.42.340

J. S. Strenkowski and J. T. Carroll, A Finite Element Model of Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.107, issue.4, pp.346-354, 1985.
DOI : 10.1115/1.3186008

T. D. Marusich and M. Ortiz, Modelling and simulation of high-speed machining, International Journal for Numerical Methods in Engineering, vol.36, issue.18, pp.3675-3694, 1995.
DOI : 10.1007/BF02812022

M. Movahhedy, M. S. Gadala, and Y. Altintas, Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian???Eulerian finite-element method, Journal of Materials Processing Technology, vol.103, issue.2, pp.267-275, 2000.
DOI : 10.1016/S0924-0136(00)00480-5

M. S. Gadala, Recent trends in ALE formulation and its applications in solid mechanics, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.39-41, pp.39-41, 2004.
DOI : 10.1016/j.cma.2004.02.019

H. Miguelez, R. Zaera, A. Rusinek, A. Moufki, and A. Molinari, Numerical modelling of orthogonal cutting: Influence of cutting conditions and separation criterion, Journal de Physique IV (Proceedings), vol.134, issue.134, pp.417-422, 2006.
DOI : 10.1051/jp4:2006134064

E. M. Trent and P. K. Wright, Metal Cutting, 2000.

M. Bäker, Finite element simulation of high-speed cutting forces, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.117-126, 2006.
DOI : 10.1016/j.jmatprotec.2006.02.019

M. Bäker, Finite Element Simulation of Chip Formation, 2004.

J. S. Strenkowski and K. J. Moon, Finite Element Prediction of Chip Geometry and Tool/Workpiece Temperature Distributions in Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.112, issue.4
DOI : 10.1115/1.2899593

C. R. Liu and Y. B. Guo, Finite element analysis of the effect of sequential cuts and tool???chip friction on residual stresses in a machined layer, International Journal of Mechanical Sciences, vol.42, issue.6, pp.1069-1086, 2000.
DOI : 10.1016/S0020-7403(99)00042-9

G. Shi, X. Deng, and C. Shet, A finite element study of the effect of friction in orthogonal metal cutting, Finite Element in Analysis and Design, pp.863-883, 2002.

T. H. Childs, Friction modelling in metal cutting, Wear, vol.260, issue.3, pp.310-318, 2006.
DOI : 10.1016/j.wear.2005.01.052

Y. Karpat and T. Özel, Mechanics of high speed cutting with curvilinear edge tools, International Journal of Machine Tools and Manufacture, vol.48, issue.2, pp.195-208, 2008.
DOI : 10.1016/j.ijmachtools.2007.08.015

T. H. Childs, Numerical experiments on the influence of material and other variables on plane strain continuous chip formation in metal machining, International Journal of Mechanical Sciences, vol.48, issue.3
DOI : 10.1016/j.ijmecsci.2005.09.012

K. P. Maity and N. S. Das, A slip-line solution to metal machining using a cutting tool with a step-type chip-breaker, Journal of Materials Processing Technology, vol.79, issue.1-3, pp.217-223, 1998.
DOI : 10.1016/S0924-0136(98)00015-6

P. Sartkulvanich, F. Koppka, and T. Altan, Determination of flow stress for metal cutting simulation???a progress report, Journal of Materials Processing Technology, vol.146, issue.1, pp.61-71, 2004.
DOI : 10.1016/S0924-0136(03)00845-8

A. J. Shih, Finite Element Simulation of Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.28, issue.1
DOI : 10.1115/1.3439413

H. Bil, S. E. Kiliç, and A. E. Tekkaya, A comparison of orthogonal cutting data from experiments with three different finite element models, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.933-944, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.016

L. Filice, F. Micari, S. Rizzuti, and D. Umbrello, A critical analysis on the friction modelling in orthogonal machining, Inter, J. of Mach. Tools and Manufacture, vol.47, pp.3-4, 2007.

J. Brocail, Analyse expérimentale et numérique du contact à l'interface outilcopeau lors de l'usinage à grandes vitesses des métaux, Thèse doctorale, 2009.

. Kitagawa, Experiments on and Finite Element Modeling of turning freecutting steels at cutting speeds up to 250 m/min, Proceedings of 1st French and German Conference on High Speed Machining, pp.325-331, 1997.

P. J. Arrazola, D. Ugarte, and X. Domínguez, A new approach for the friction identification during machining through the use of finite element modeling, International Journal of Machine Tools and Manufacture, vol.48, issue.2, pp.173-183, 2008.
DOI : 10.1016/j.ijmachtools.2007.08.022

. Hibbit, &. Karlsson, and . Sorenson-inc, ABAQUS Analysis User's Manual, V6, 2003.

A. Moufki, A. Devillez, D. Dudzinski, and A. Molinari, Thermo-mechanical modelling of cutting and experimental validation, Metal Cutting and High Speed Machining, Kluwer Academic, pp.51-67, 2002.

A. Moufki, A. Devillez, D. Dudzinski, and A. Molinari, Thermomechanical modelling of oblique cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.971-989, 2004.
DOI : 10.1016/j.ijmachtools.2004.01.018

J. C. Hamann, V. Grolleau, and F. L. Maitre, Machinability Improvement of Steels at High Cutting Speeds ??? Study of Tool/Work Material Interaction, CIRP Annals, vol.45, issue.1, pp.87-92, 1996.
DOI : 10.1016/S0007-8506(07)63022-4

A. Rusinek, R. Zaera, J. R. Klepaczko, and R. Cheriguene, Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel, Acta Materialia, vol.53, issue.20, pp.5387-5400, 2005.
DOI : 10.1016/j.actamat.2005.08.019

A. Molinari and A. Moufki, A new thermomechanical model of cutting applied to turning operations. Part I. Theory, International Journal of Machine Tools and Manufacture, vol.45, issue.2, pp.166-180, 2005.
DOI : 10.1016/j.ijmachtools.2004.07.004

P. J. Arrazola, I. Arriola, M. A. Davies, A. L. Cooke, and B. S. Dutterer, The effect of machinability on thermal fields in orthogonal cutting of AISI 4140 steel, CIRP Annals, vol.57, issue.1, pp.65-68, 2008.
DOI : 10.1016/j.cirp.2008.03.139

T. Mabrouki and J. F. , A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning, Journal of Materials Processing Technology, vol.176, issue.1-3, pp.214-221, 2006.
DOI : 10.1016/j.jmatprotec.2006.03.159

URL : https://hal.archives-ouvertes.fr/hal-00938632

D. Umbrello, L. Filice, S. Rizzuti, and F. Micari, On the evaluation of the global heat transfer coefficient in cutting, International Journal of Machine Tools and Manufacture, vol.47, issue.11, pp.1738-1743, 2007.
DOI : 10.1016/j.ijmachtools.2006.12.002

D. G. Bansal and J. L. Streator, A method for obtaining the temperature distribution at the interface of sliding bodies, Wear, vol.266, issue.7-8, pp.721-732, 2009.
DOI : 10.1016/j.wear.2008.08.019

W. Grzesik and P. Nieslony, A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools, International Journal of Machine Tools and Manufacture, vol.43, issue.13, pp.1311-1317, 2003.
DOI : 10.1016/S0890-6955(03)00160-3

A. Devillez, S. Lesko, and W. Mozer, Cutting tool crater wear measurement with white light interferometry, Wear, vol.256, issue.1-2, pp.56-65, 2004.
DOI : 10.1016/S0043-1648(03)00384-3

G. Sutter and A. Molinari, Analysis of the Cutting Force Components and Friction in High Speed Machining, Journal of Manufacturing Science and Engineering, vol.36, issue.2, pp.245-250, 2005.
DOI : 10.1115/1.3667587

G. Sutter, S. Philippon, and A. Molinari, An experimental investigation of dry friction for a large range of sliding velocities, Matériaux & Techniques, Numéro Hors Serie, pp.1-5, 2004.