. Bibliographie and . Abujudom, The effect of Cold Work and heat treatment on the phase transformations of near equiatomic NiTi Shape Memory Alloy, Materials Science Forum, pp.56-58565, 1990.

M. Ashby, The deformation of plastically non-homogenous materials, Phil. Mag, vol.21, pp.3999-424, 1970.

G. Bastin-et-rieck-]-bastin and G. Et-rieck, Diffusion in the titanium-nickel system: I. occurrence and growth of the various intermetallic compounds, Metallurgical Transactions, vol.21, issue.8, p.1817, 1974.
DOI : 10.1007/BF02644146

L. Bataillard, Transformation martensitique multiple dans un alliage à mémoire de forme Ni-Ti, 1996.

B. Bergstrom, J. Bergstrom, and M. Et-boyce, Constitutive modeling of the large strain time-dependent behavior of elastomers, Journal of the Mechanics and Physics of Solids, vol.46, issue.5, pp.931-954, 1998.
DOI : 10.1016/S0022-5096(97)00075-6

. Bo, Z. Bo, and D. Et-lagoudas, Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part I: theoretical derivations, International Journal of Engineering Science, vol.37, issue.9, pp.1175-1203, 1999.
DOI : 10.1016/S0020-7225(98)00113-X

. Bo, Z. Bo, and D. Et-lagoudas, Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part IV: modeling of minor hysteresis loops, International Journal of Engineering Science, vol.37, issue.9, pp.371175-1203, 1999.
DOI : 10.1016/S0020-7225(98)00116-5

. Bouvet, A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings, European Journal of Mechanics - A/Solids, vol.23, issue.1, pp.37-61, 2004.
DOI : 10.1016/j.euromechsol.2003.09.005

M. Bowles, J. Bowles, and J. Et-mackenzie, The crystallography of martensite transformations I, Acta Metallurgica, vol.2, issue.1, pp.129-137, 1954.
DOI : 10.1016/0001-6160(54)90102-9

. Boyd, J. Boyd, and D. Et-lagoudas, Thermomechanical Response of Shape Memory Composites, Journal of Intelligent Material Systems and Structures, vol.24, issue.123, pp.333-346, 1994.
DOI : 10.1016/0020-7225(84)90033-8

. Fan, Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti???Ni shape memory alloys, Acta Materialia, vol.52, issue.14, pp.4351-4362, 2004.
DOI : 10.1016/j.actamat.2004.06.002

. Favier, Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti???50.8at.% Ni thin tube under tension. Investigation via temperature and strain fields measurements, Acta Materialia, vol.55, issue.16, pp.5310-5322, 2007.
DOI : 10.1016/j.actamat.2007.05.027

URL : https://hal.archives-ouvertes.fr/hal-00336739

. Frick, Thermal processing of polycristalline NiTi shape memory alloys, pp.34-49, 2005.

H. Funakubo, Shape Memory Alloys, 1987.

. Gao, A multivariant micromechanical model for SMAs Part 1. Crystallographic issues for single crystal model, International Journal of Plasticity, vol.16, issue.10-11, pp.1345-1369, 2000.
DOI : 10.1016/S0749-6419(00)00013-9

. Gao, Finite element analysis of adaptive-stiffening and shape-control SMA hybrid composites, Proceedings of SPIE, pp.406-416, 2005.

. Garner, Development of a shape memory alloy actuated biomimetic vehicle, Smart Materials and Structures, vol.9, issue.5, pp.673-683, 2000.
DOI : 10.1088/0964-1726/9/5/312

. Gillet, Calculation of Pseudoelastic Elements Using a Non-Symmetrical Thermomechanical Transformation Criterion and Associated Rule, Journal of Intelligent Material Systems and Structures, vol.1, issue.5, pp.366-378, 1998.
DOI : 10.1051/rphysap:01988002304055700

G. Et-bruhns-]-grabe, C. Et-bruhns, and O. , Path dependence and multiaxial behavior of a polycrystalline NiTi alloy within the pseudoelastic and pseudoplastic temperature regimes, International Journal of Plasticity, vol.25, issue.3, pp.513-545, 2009.
DOI : 10.1016/j.ijplas.2008.03.002

[. Sell, C. Coupard-]-g-'sell, and A. Et-coupard, Génie mécanique des caoutchoucs, 1997.

G. Guenin, Shape Memory and Pseudoelastic Properties of Fe-Mn-Si and Ti-Ni Based Alloys, Le Journal de Physique IV, vol.07, issue.C5, pp.7-5467, 1997.
DOI : 10.1051/jp4:1997574

URL : https://hal.archives-ouvertes.fr/jpa-00255674

B. Haddag, Contribution à la modélisation de la mise en forme de tôles métalliques : application au retour élastique et à la localisation, 2007.

. Hartl, . Lagoudas, D. Hartl, and D. Et-lagoudas, Aerospace applications of shape memory alloys, Proceedings of the Institution of Mechanical Engineers, p.221, 2007.
DOI : 10.1016/S0020-7225(98)00116-5

. Bibliographie, Numerically implemented constitutive model for SMA applications experiencing general loads resulting in plastic deformation and large rotations, Proc. of ASME SMASIS, 2008.

R. Hill, Elastic properties of reinforced solids: Some theoretical principles, Journal of the Mechanics and Physics of Solids, vol.11, issue.5, pp.357-372, 1963.
DOI : 10.1016/0022-5096(63)90036-X

. Huang, . Brinson, M. Huang, and L. C. Et-brinson, A Multivariant model for single crystal shape memory alloy behavior, Journal of the Mechanics and Physics of Solids, vol.46, issue.8, pp.46-1379, 1998.
DOI : 10.1016/S0022-5096(97)00080-X

. Huang, A multivariant micromechanical model for SMAs Part 2. Polycrystal model, International Journal of Plasticity, vol.16, issue.10-11, pp.1371-1390, 2000.
DOI : 10.1016/S0749-6419(00)00014-0

W. Hughes, T. Hughes, and J. Et-winget, Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis, International Journal for Numerical Methods in Engineering, vol.101, issue.12, pp.1862-1897, 1980.
DOI : 10.1115/1.3454627

. Khalil-allafi, Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformations, Acta Materialia, vol.50, issue.17, pp.4255-4274, 2002.
DOI : 10.1016/S1359-6454(02)00257-4

. Khalil-allafi, The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys, Acta Materialia, vol.50, issue.4, pp.793-803, 2002.
DOI : 10.1016/S1359-6454(01)00385-8

K. Et-marburger-]-koistinen, D. Et-marburger, and R. , A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels, Acta Metall, vol.7, pp.55-69, 1959.

D. Lagoudas, Shape Memory Alloys -Modeling and Engineering Applications. Sciences Sup, 2008.

. Lagoudas, . Bo, D. Lagoudas, and Z. Et-bo, Thermomechanical modeling of polycrystalline SMAs under cyclic loading, Part II: material characterization and experimental results for a stable transformation cycle, International Journal of Engineering Science, vol.37, issue.9, pp.371175-1203, 1999.
DOI : 10.1016/S0020-7225(98)00114-1

L. Et-entchev-]-lagoudas, D. Et-entchev, and P. , Modeling of transformation-induced plasticity and its effect on the behavior of porous shape memory alloys. Part I: constitutive model for fully dense SMAs, Mechanics of Materials, vol.36, issue.9, pp.865-892, 2004.
DOI : 10.1016/j.mechmat.2003.08.006

. Lagoudas, Shape memory alloys, Part II: Modeling of polycrystals, Mechanics of Materials, vol.38, issue.5-6, pp.430-462, 2006.
DOI : 10.1016/j.mechmat.2005.08.003

L. Et-chaboche-]-lemaitre, J. Et-chaboche, and J. , Mécanique des matériaux solides, p.2, 2004.

. Lexcellent, About modelling the shape memory alloy behaviour based on the phase trans, 2006.

. Lexcellent, . Leclercq, C. Lexcellent, and S. Et-leclercq, A general macroscopic description of the thermomechanical behavior of shape memory alloys, J. Mech. and Phys. of Solids, vol.44, issue.6, pp.953-980, 1996.

. Lexcellent, . Schlomerkemper, C. Lexcellent, and A. Et-schlomerkemper, Comparison of several models for the determination of the phase transformation yield surface in shape-memory alloys with experimental data, Acta Materialia, vol.55, issue.9, pp.2995-3006, 2006.
DOI : 10.1016/j.actamat.2006.12.033

URL : https://hal.archives-ouvertes.fr/hal-00263819

. Lexcellent, Experimental and numerical determinations of the initial surface of phase transformation under biaxial loading in some polycrystalline shape-memory alloys, Journal of the Mechanics and Physics of Solids, vol.50, issue.12, pp.2717-2735, 2002.
DOI : 10.1016/S0022-5096(02)00007-8

URL : https://hal.archives-ouvertes.fr/hal-00079417

R. Liang, C. Liang, and C. Et-rogers, One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials, Journal of Intelligent Material Systems and Structures, vol.58, issue.9, pp.207-234, 1990.
DOI : 10.1063/1.338151

R. Liang, C. Liang, and C. Et-rogers, A multi-dimensional constitutive model for shape memory alloys, Journal of Engineering Mathematics, vol.29, issue.3, pp.429-443, 1992.
DOI : 10.2320/matertrans1960.29.781

. Liu, . Favier, Y. Liu, and D. Et-favier, Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi, Acta Materialia, vol.48, issue.13, pp.483489-3499, 2000.
DOI : 10.1016/S1359-6454(00)00129-4

. Liu, Asymmetry of stress???strain curves under tension and compression for NiTi shape memory alloys, Acta Materialia, vol.46, issue.12, pp.4325-4338, 1998.
DOI : 10.1016/S1359-6454(98)00112-8

. Liu, Some results on the detwinning process in NiTi shape memory alloys, Scripta Materialia, vol.41, issue.12, pp.1273-1281, 1999.
DOI : 10.1016/S1359-6462(99)00299-7

. Lu, Z. Lu, and G. Et-weng, A self-consistent model for the stress???strain behavior of shape-memory alloy polycrystals, Acta Materialia, vol.46, issue.15, pp.5423-5433, 1998.
DOI : 10.1016/S1359-6454(98)00203-1

. Mertmann, Development of a robotic gripper based on a NiTi-silicone composite material with integrated sensing functions, Proceedings of SMM-94, p.556, 1994.

. Miyazaki, Effect of thermal cycling on the transformation temperatures of Ti???Ni alloys, Acta Metallurgica, vol.34, issue.10, p.2045, 1986.
DOI : 10.1016/0001-6160(86)90263-4

. Miyazaki, CHARACTERISTICS OF DEFORMATION AND TRANSFORMATION PSEUDOELASTICITY IN Ti-Ni ALLOYS, Le Journal de Physique Colloques, vol.43, issue.C4, pp.4-255, 1982.
DOI : 10.1051/jphyscol:1982434

URL : https://hal.archives-ouvertes.fr/jpa-00222148

. Neuking, Polymer/NiTi-composites: Fundamental Aspects, Processing and Properties, Advanced Engineering Materials, vol.24, issue.395, p.1014, 2005.
DOI : 10.1117/12.484696

. Bibliographie and . Nishida, Precipitation processes in near-equiatomic TiNi Shape Memory Alloys, Metall. Trans, vol.17, p.1505, 1986.

. Orgéas, . Favier, F. Orgéas, and D. Et-favier, Stress-induced martensitic transformation of a NiTi alloy in isothermal shear, tension and compression, Acta Materialia, vol.46, issue.15, pp.465579-5591, 1998.
DOI : 10.1016/S1359-6454(98)00167-0

J. Ortin, Preisach modeling of hysteresis for a pseudoelastic Cu???Zn???Al single crystal, Journal of Applied Physics, vol.22, issue.3, pp.711454-1461, 1992.
DOI : 10.1088/0022-3727/22/7/017

. Otsuka-et-ren, K. Otsuka, and X. Et-ren, Physical metallurgy of Ti???Ni-based shape memory alloys, Progress in Materials Science, vol.50, issue.5, pp.511-678, 2005.
DOI : 10.1016/j.pmatsci.2004.10.001

W. Otsuka, K. Otsuka, and C. Et-wayman, Shape Memory Materials. Sciences sup, 1998.

. Panico, . Brinson, M. Panico, and L. Et-brinson, A three-dimensional phenomenological model for martensite reorientation in shape memory alloys, Journal of the Mechanics and Physics of Solids, vol.55, issue.11, pp.2491-2511, 2007.
DOI : 10.1016/j.jmps.2007.03.010

. Panico, . Brinson, M. Panico, and L. Et-brinson, Computational modeling of porous shape memory alloys, International Journal of Solids and Structures, vol.45, issue.21, pp.455613-5626, 2008.
DOI : 10.1016/j.ijsolstr.2008.06.005

C. Patel, J. Patel, and M. Et-cohen, Criterion for the action of applied stress in the martensitic transformation, Acta Metallurgica, vol.1, issue.5, p.531, 1953.
DOI : 10.1016/0001-6160(53)90083-2

. Patoor, Micromechanical Modelling of Superelasticity in Shape Memory Alloys, Le Journal de Physique IV, vol.06, issue.C1, pp.1-6277, 1996.
DOI : 10.1051/jp4:1996127

URL : https://hal.archives-ouvertes.fr/jpa-00254159

. Patoor, . Berveiller, E. Patoor, and M. Et-berveiller, Technologie des alliages à mémoire de forme, 1994.

. Patoor, Determination of the Origin for the Dissymmetry Observed between Tensile and Compression Tests on Shape Memory Alloys, Le Journal de Physique IV, vol.05, issue.C2, pp.495-500, 1995.
DOI : 10.1051/jp4:1995276

URL : https://hal.archives-ouvertes.fr/jpa-00253662

. Patoor, Shape memory alloys, Part I: General properties and modeling of single crystals, Mechanics of Materials, vol.38, issue.5-6, pp.391-429, 2006.
DOI : 10.1016/j.mechmat.2005.05.027

. Payandeh, Effect of martensitic transformation on the debonding propagation in Ni???Ti shape memory wire composite, Materials Science and Engineering: A, vol.518, issue.1-2, 2009.
DOI : 10.1016/j.msea.2009.04.019

B. Peultier, Alliages à mémoire de forme : modélisation et calcul de structures, Thèse de doctorat, Ecole Nationale Supérieure d'Arts et Métiers Centre de Metz, 2005.

. Peultier, Macroscopic constitutive law of shape memory alloy thermomechanical behaviour. Application to structure computation by FEM, Mechanics of Materials, vol.38, issue.5-6, pp.510-524, 2006.
DOI : 10.1016/j.mechmat.2005.05.026