M. Murali, D. Ratna, A. B. Samui, B. C. Chakraborty, and . Synthesis, Synthesis, characterization, and evaluation of carboxyl-terminated poly(ethylene glycol) adipate-modified epoxy networks: Effect of molecular weight, Journal of Applied Polymer Science, vol.34, issue.3, pp.1723-1730, 2007.
DOI : 10.1021/ba-1993-0233.ch010

S. Steven, V. A. Guy, and V. M. Bruno, « Reaction Kinetics Modeling and Thermal Properties of Epoxy-Amines as Measured by Modulated-Temperature DSC. I. Linear Step-Growth Polymerization of DGEBA + Aniline, Journal of Applied Polymer Science, vol.91, pp.2798-2813, 2004.

M. A. Escola, C. A. Moina, N. Gomez, A. C. Ybarra, and G. O. , The determination of the degree of cure in epoxy paints by infrared spectroscopy, Polymer Testing, vol.24, issue.5, pp.572-575, 2005.
DOI : 10.1016/j.polymertesting.2005.02.013

G. Tripathi and D. Srivastava, « Effect of Carboxyl-Terminated Poly

S. Narayanan and L. S. Schadler, Mechanisms of kink-band formation in graphite/epoxy composites a micromechanical experimental study, Composites Science and Technology, vol.59, issue.15, pp.2201-2213, 1999.
DOI : 10.1016/S0266-3538(99)00074-3

P. I. Karkanas, I. K. Partridge, and D. Attwood, Modelling the Cure of a Commercial Epoxy Resin for Applications in Resin Transfer Moulding, Polymer International, vol.41, issue.2, pp.183-191, 1996.
DOI : 10.1002/(SICI)1097-0126(199610)41:2<183::AID-PI621>3.0.CO;2-F

J. Wang, J. R. Page, and R. Patod, Experimental investigation of the draping properties of reinforcement fabrics, Composites Science and Technology, vol.58, issue.2, pp.229-231, 1998.
DOI : 10.1016/S0266-3538(97)00115-2

J. Mijovi?, S. Andieli?, and J. M. Kenny, In situ real-time monitoring of epoxy/amine kinetics by remote near infrared spectroscopy, Polymers for Advanced Technologies, vol.7, issue.1, pp.1-16, 1995.
DOI : 10.1002/(SICI)1099-1581(199601)7:1<1::AID-PAT480>3.0.CO;2-N

B. Degamber and G. F. Fernando, Fibre optic dilato-spectroscopic sensor: simultaneous thermal, spectral, and physical analyses of materials, Smart Materials and Structures, vol.15, issue.4, pp.1054-1062, 2006.
DOI : 10.1088/0964-1726/15/4/019

D. Puglia, L. Valentini, and J. M. Kenny, Analysis of the cure reaction of carbon nanotubes/epoxy resin composites through thermal analysis and Raman spectroscopy, Journal of Applied Polymer Science, vol.79, issue.2, pp.452-458, 2003.
DOI : 10.1103/PhysRevLett.79.1297

G. Liang, R. Zuo, T. Lu, and J. Wang, Modification of vinyl ester resin by a new thermoset liquid crystalline diacrylate, Journal of Materials Science, vol.40, issue.8, pp.2089-2091, 2005.
DOI : 10.1007/s10853-005-1242-2

M. Wallace, D. Attwood, R. J. Day, and F. Heatley, Investigation of the microwave curing of the PR500 epoxy resin system, Investigation of the Microwave Curing of the PR500 Epoxy resin System, pp.5862-5869, 2006.
DOI : 10.1007/s10853-006-0321-3

G. Cheng, L. Chang-li, L. Yi-fei, and Y. Bai, « Preparation and Characterization of High Refractive Index Thin Film of TiO 2, Epoxy Resin Nanocomposites » Journal of Applied Polymer Science, vol.102, pp.1631-1636, 2006.

L. Monney, R. Belali, J. Vebrel, C. Dubois, and A. Chambaudet, Photochemical degradation study of an epoxy material by IR-ATR spectroscopy, Polymer Degradation and Stability, vol.62, issue.2, pp.353-359, 1998.
DOI : 10.1016/S0141-3910(98)00018-4

B. L. Denq, Y. S. Hu, L. W. Chen, W. Y. Chiu, and T. R. Wu, The curing reaction and physical properties of DGEBA/DETA epoxy resin blended with propyl ester phosphazene, Journal of Applied Polymer Science, vol.16, issue.1, pp.229-237, 1999.
DOI : 10.1016/0032-3861(72)90113-9

L. Monneya, C. Duboisa, D. Perreux, A. Burtheret, and A. Chambaudet, Mechanical behaviour of an epoxy-glass composite under photo-oxidation, Polymer Degradation and Stability, vol.63, issue.2, pp.219-224, 1999.
DOI : 10.1016/S0141-3910(98)00095-0

W. W. Wright and «. Tgddm, Based Epoxy Resin Systems for Aerospace Applications ». A review part I, pp.275-324, 1989.

S. Gan, J. K. Gillham, and R. B. Prime, A methodology for characterizing reactive coatings: Time???temperature???transformation (TTT) analysis of the competition between cure, evaporation, and thermal degradation for an epoxy-phenolic system, Journal of Applied Polymer Science, vol.37, issue.3, pp.803-816, 1989.
DOI : 10.1002/app.1989.070370316

K. P. Pang and J. K. Gillham, Competition between cure and thermal degradation in a high Tg epoxy system: Effect of time and temperature of isothermal cure on the glass transition temperature, Journal of Applied Polymer Science, vol.39, issue.4, pp.909-933, 1990.
DOI : 10.1002/app.1990.070390411

R. J. Morgan, J. E. O-'neal, and D. B. Miller, The structure, modes of deformation and failure, and mechanical properties of diaminodiphenyl sulphone-cured tetraglycidyl 4,4?diaminodiphenyl methane epoxy, Journal of Materials Science, vol.11, issue.1, pp.109-124, 1979.
DOI : 10.1002/polc.5070030108

R. J. Morgan and E. T. Mones, The Cure Reactions, Network Structure, and Mechanical Response of DDS cured TGDDM Epoxies, J. Appl. Polym. Sci, vol.87, issue.33, pp.999-1020, 1987.

J. Galy, Mécanisme de Réaction entre un Prépolymère Epoxyde et un Durcisseur Cyanoguanidine : Caractérisation des Réseaux Obtenus, Thèse de Doctorat de l'Inst, 1985.

D. H. Kaelble, Physical and Chemical properties of Cured Resins, EpoxyResins Chemistry and Technology, pp.327-371, 1973.

V. A. Bershtein, N. N. Peschanskaya, J. L. Halary, and L. Monnerie, The sub-Tg relaxations in pure and antiplasticized model epoxy networks as studied by high resolution creep rate spectroscopy, Polymer, vol.40, issue.24, pp.6687-6698, 1999.
DOI : 10.1016/S0032-3861(98)00873-8

J. L. Halary, S. Cukierman, and L. Monnerie, Relations entre structure chimique et propriétés mécaniques dans lesréseaux époxydes, Bull. Soc. Chem. Belg, vol.98, pp.9-10, 1989.

E. Urbaczewski-espuche, J. Galy, J. F. Gerard, J. P. Pascault, and H. Sautereau, Influence of chain flexibility and crosslink density on mechanical properties of epoxy/amine networks, Polymer Engineering and Science, vol.15, issue.22, pp.1572-1580, 1991.
DOI : 10.1002/polb.1987.090251012

. Gera, J. F. Gerard, J. Andrews, S. Macosko, and C. W. , Dynamic Mechanical Measurement : Comparison Between Bending and Torsion Methods on a Graphite Reinforced and a Rubber-modified Epoxy, Polym. Comp, vol.11, issue.2, pp.90-97, 1992.

J. Mijovic and L. Tsay, Correlations between dynamic mechanical properties and nodular morphology of cured epoxy resins, Polymer, vol.22, issue.7, pp.902-906, 1981.
DOI : 10.1016/0032-3861(81)90265-2

M. Ochi, H. Kageyama, and M. Shimbo, Mechanical and dielectric relaxations of poly(hydroxy ethers): 1. Low-temperature relaxations, Polymer, vol.29, issue.2, pp.320-324, 1988.
DOI : 10.1016/0032-3861(88)90340-0

I. Harismendy, R. Miner, A. Valea, R. Llano-ponte, F. Mujika et al., Strain rate and temperature effects on the mechanical behaviour of epoxy mixtures with different crosslink densities, Polymer, vol.38, issue.22, pp.5573-5577, 1997.
DOI : 10.1016/S0032-3861(97)00121-3

J. Wolfrum and G. W. Ehrenstein, Interdependence between the curing, structure, and the mechanical properties of phenolic resins, Journal of Applied Polymer Science, vol.16, issue.13, pp.3173-3185, 1999.
DOI : 10.1002/(SICI)1097-4628(19991220)74:13<3173::AID-APP21>3.0.CO;2-6

S. V. Levchik, G. Camino, M. P. Luda, and L. Costa, Thermal decomposition of 4,4???-diaminodiphenylsulphone, Thermal Decomposition of 4, pp.217-228, 1995.
DOI : 10.1016/0040-6031(95)90498-0

C. Ph, J. Mathez, J. Tschiember, P. Pérès, D. «-raman-ratna et al., Measurement of the Carbon Fibres Stress Within Industrial Epoxy Matrices Under Controlled Tensile Strain, Clayreinforced Epoxy Nanocomposites », Polymer International, pp.1403-1407, 2003.

R. Montanini and L. D-'acquisto, Simultaneous measurement of temperature and strain in glass fiber/epoxy composites by embedded fiber optic sensors: I. Cure monitoring, Smart Materials and Structures, pp.1718-1726, 2007.
DOI : 10.1088/0964-1726/16/5/026

J. Mijovi?, W. V. Corso, L. Nicolais, and G. Ambrosio, In situ real-time study of crosslinking kinetics in thermal and microwave fields, Polymers for Advanced Technologies, vol.9, issue.4, pp.231-243, 1998.
DOI : 10.1002/(SICI)1099-1581(199804)9:4<231::AID-PAT747>3.0.CO;2-W

I. Lack, I. Krupa, M. Stach, A. Ku?ma, J. Jur?iová et al., Thermal lag and its practical consequence in the dynamic mechanical analysis of polymers, Polymer Testing, vol.19, issue.7, pp.755-771, 2000.
DOI : 10.1016/S0142-9418(99)00046-X

A. Cherdoud-chihani, M. Mouzali, M. J. Abadie, and D. Etude-de-la-réticulation, Styrène-Alt-Anhydride Maléique) par DSC Isotherme, European Polymer Journal, vol.97, issue.33, pp.9-1415, 1997.

S. Zhou and M. C. Hawley, A study of microwave reaction rate enhancement effect in adhesive bonding of polymers and composites, Composite Structures, vol.61, issue.4, pp.303-309, 2003.
DOI : 10.1016/S0263-8223(03)00061-8

A. P. Sokolov, A. Kisliuk, and D. Quitmann, Evaluation of density of vibrational states of glasses from low-frequency Raman spectra, Physical Review B, vol.68, issue.10, pp.10-7692, 1993.
DOI : 10.1103/PhysRevLett.68.2472

M. Pellegrino, A. Mario, R. Giuseppe, S. Gennaro, . Study et al., nearinfrared and Dynamic-Mechanical Spectroscopies on the Curing Behaviour, Molecular Structure and Viscoelastic properties of Epoxy, pp.3703-3716, 2007.

X. Colin, C. Marais, and J. Verdu, Kinetic modelling and simulation of gravimetric curves: application to the oxidation of bismaleimide and epoxy resins, Polymer Degradation and Stability, vol.78, issue.3, pp.545-553, 2002.
DOI : 10.1016/S0141-3910(02)00230-6

A. Boukenter, E. Duval, H. M. Rosenberg, and . Raman, Raman scattering in amorphous and crystalline materials: a study of epoxy resin and DGEBA, Journal of Physics C: Solid State Physics, vol.21, issue.15, pp.541-547, 1988.
DOI : 10.1088/0022-3719/21/15/011

A. Claver?e and «. Tga, FTIR Study on Thermal Degradation of Polymethacrylates Containing Carboxylic Groups, Polymer Degradation and Stability, vol.91, pp.3312-3321, 2006.

D. Lahlali, M. Naffakh, and M. Dumon, Cure kinetics and modeling of an epoxy resin cross-linked in the presence of two different diamine hardeners, Polymer Engineering & Science, vol.72, issue.12, pp.1582-1589, 2005.
DOI : 10.1007/3-540-61218-1_7

URL : https://hal.archives-ouvertes.fr/hal-00400269

G. A. George, G. A. Cash, and L. Rintoul, Cure Monitoring of Aerospace Epoxy Resins and Prepregs by Fourier Transform Infrared Emission Spectroscopy, Polymer International, vol.41, issue.2, pp.169-182, 1996.
DOI : 10.1002/(SICI)1097-0126(199610)41:2<169::AID-PI606>3.0.CO;2-2