Z. Huang, M. Lucas, and M. J. Adams, Modelling wall boundary conditions in an elasto-viscoplastic material forming process, Journal of Materials Processing Technology, vol.107, issue.1-3, pp.267-275, 2000.
DOI : 10.1016/S0924-0136(00)00705-6

M. Murakawa and M. Jin, The utility of radially and ultrasonically vibrated dies in the wire drawing process, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.81-86, 2001.
DOI : 10.1016/S0924-0136(01)00635-5

M. Lucas, Vibration sensitivity in the design of ultrasonic forming dies, Ultrasonics, vol.34, issue.1, pp.35-41, 1996.
DOI : 10.1016/0041-624X(95)00091-G

Y. Ashida and H. Aoyama, Press forming using ultrasonic vibration, Journal of Materials Processing Technology, vol.187, issue.188, pp.118-122, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.174

A. Eaves, A. Smith, D. Waterhouse, and . Sansome, Review of the application of ultrasonic vibrations to deforming metals, Ultrasonics, vol.13, issue.4, pp.162-170, 1975.
DOI : 10.1016/0041-624X(75)90085-2

K. Siegert and J. Ulmer, Influencing the Friction in Metal Forming Processes by Superimposing Ultrasonic Waves, Annals of CIRP 501, pp.195-200, 2001.
DOI : 10.1016/S0007-8506(07)62103-9

M. Hayashi, M. Jin, S. Thipprakmas, M. Murakawa, J. Hung et al., Simulation of ultrasonic-vibration drawing using the finite element method (FEM), Journal of Materials Processing Technology, vol.140, issue.1-3, p.140, 2003.
DOI : 10.1016/S0924-0136(03)00699-X

S. Mousavi, H. Feizi, and R. Madoliat, Investigations on the effects of ultrasonic vibrations in the extrusion process, Journal of Materials Processing Technology, vol.187, issue.188, pp.187-188, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.168

S. A. Mousavi, H. Feizi, and R. Madoliat, Investigations on the effects of ultrasonic vibrations in the extrusion process, Journal of Materials Processing Technology, vol.187, issue.188, pp.187-188, 2007.
DOI : 10.1016/j.jmatprotec.2006.11.168

B. Gouveia, J. Rodrigues, N. Bay, P. Lucas, and M. J. Adams, Finite-element modelling of cold forward extrusion, Journal of Materials Processing Technology, vol.94, issue.2-3, pp.85-93, 1999.
DOI : 10.1016/S0924-0136(99)00084-9

J. Hung and C. Hung, The influence of ultrasonic-vibration on hot upsetting of aluminum alloy, Ultrasonics, vol.43, issue.8, pp.692-698, 2005.
DOI : 10.1016/j.ultras.2005.03.001

J. Hung, Y. Tsai, and C. Hung, Frictional effect of ultrasonic-vibration on upsetting, Ultrasonics, vol.46, issue.3, pp.277-284, 2007.
DOI : 10.1016/j.ultras.2007.03.003

R. Ly, C. Giraud-audine, G. Abba, and R. Bigot, Experimentally valided approach for the simulation of the forging process using mechanical vibration, International Journal of Material Forming, vol.26, issue.188, pp.133-136, 2009.
DOI : 10.1016/S0168-874X(97)00086-3

URL : https://hal.archives-ouvertes.fr/hal-00781874

C. Giraud-audine, R. Bigot, G. Abba, L. Morhain, and R. Ly, Procédé de mise en forme assisté par vibrations Demande de brevet français n ? 09 04042, 2009.

P. Baque, E. Felder, J. Hyafil, and Y. Descatha, Mise en forme des métaux ; calculs par la plasticité, 1973.

E. Felder, Analyse des procédés de mise en forme -méthodes de calcul des contraintes, 2009.

T. Balan, Calcul des procédés de formage : la méthode des tranches

H. Allik and T. Hughes, Finite element method for piezoelectric vibration, International Journal for Numerical Methods in Engineering, vol.37, issue.2, pp.151-157, 1970.
DOI : 10.1109/T-SU.1968.29457

V. Piefort and A. Preumont, Modeling of smart piezoelectric shell structures with finite elements, 25th International Conference on Noise and Vibration Engineering, pp.891-898, 2000.

C. Poizat and A. Benjeddou, On analytical and finite element modelling of piezoelectric extension and shear bimorphs, Computers & Structures, vol.84, issue.22-23, pp.1426-1437, 2006.
DOI : 10.1016/j.compstruc.2005.01.005

C. Giraud-audine and B. Nogarède, Analytical modelling of travelling-wave piezomotor stators using a variational approach, The European Physical Journal Applied Physics, vol.5, issue.1, pp.71-79, 1999.
DOI : 10.1007/978-3-642-83243-7

P. Juang, Analyticmodelinganddrivingforanultrasonicwheelsystem, Mechanical SystemsandSignalProcessing, vol.23, pp.514-522, 2009.

R. Ly, C. Giraud-audine, R. Bigot, and G. Abba, Longitudinal vibrations modeling of a piezoelectric actuator used in forming process, 2009 IEEE International Conference on Mechatronics, 2009.
DOI : 10.1109/ICMECH.2009.4957179

E. Felder, Analyse des procédés de mise en forme -méthodes énergétique, 2009.

K. C. Kao, Dielectric Phenomena in Solids, 2004.

B. Nogarede, Moteurs piézoélectriques, pp.3-765, 1996.

D. Bellet and J. Barrau, Cours d'élasticité, Publié avec le concours du MRT, 1990.

M. Brissaud, Matériaux piézoélectriques. c presse polytechniqus et universitaires romandes, 2007.

N. Bellomo and P. D. Torino, Modeling and Simulation in Science, Engineering and Technology, Birkhauser Boston : LAP/SB, 2006.

C. Giraud-audine, Contribution à la modélisation analytique d'action-neurs en vue de leur conception et dimensionnement, 1998.

A. Preumont, Mechatronics Dynamics of Electromechanical and Piezoelectric Systems, 2006.

R. E. Newnham, Properties of materials, 2005.

U. Von-wagner, M. Goldfarb, and N. Celanovic, Non-linear longitudinal vibrations of piezoceramics excited by weak electric fields, International Journal of Non-Linear Mechanics, vol.38, issue.4, pp.565-574, 1997.
DOI : 10.1016/S0020-7462(01)00113-5

H. Adriaens, W. L. De-koning, and R. Banning, Modeling piezoelectric actuators, IEEE/ASME Transactions on Mechatronics, vol.5, issue.4, p.331, 2000.
DOI : 10.1109/3516.891044

URL : https://repository.tudelft.nl/islandora/object/uuid%3A247c064b-a864-470b-933a-71fafd243edc/datastream/OBJ/download

A. Fernandes and J. Pouget, An accurate modelling of piezoelectric multi-layer plates, European Journal of Mechanics - A/Solids, vol.21, issue.4, pp.629-651, 2002.
DOI : 10.1016/S0997-7538(02)01224-X

M. Samal, P. Seshu, S. Parashar, U. Von-wagner, P. Hagedorn et al., A finite element model for nonlinear behaviour of piezoceramics under weak electric fields, Finite Elements in Analysis and Design, vol.41, issue.15, pp.1464-1480, 2005.
DOI : 10.1016/j.finel.2005.05.002

S. Park and S. Yang, A mathematical approach for analyzing ultra precision positioning system with compliant mechanism, Journal of Materials Processing Technology, vol.164, issue.165, pp.164-165, 2005.
DOI : 10.1016/j.jmatprotec.2005.02.018

Z. Wang, S. Chen, and W. Han, The static shape control for intelligent structures, Finite Elements in Analysis and Design, vol.26, issue.4, pp.303-314, 1997.
DOI : 10.1016/S0168-874X(97)00086-3

DOI : 10.3182/20050703-6-CZ-1902.00527

URL : https://hal.archives-ouvertes.fr/hal-00527358

H. Tiersten, Hamilton's principle for linear piezoelectric media, Proceedings of the IEEE, vol.55, issue.8, pp.1523-1524, 1967.
DOI : 10.1109/PROC.1967.5887

M. Géradin and D. Rixen, Mechanical Vibrations, Theory and Application to structural Dynamics, 1994.

S. Timoshenko, W. Weaver, and D. Young, Vibration Problems in Engineering, 1928.

G. Genta, Vibration Dynamics and Control, Springer+Business Media, 2009.

I. Chowdhury and S. P. Dasgupta, Computation of rayleigh damping coefficients for large systems, Electronic Journal of Geotechnical Engineering, vol.8, issue.C, 2003.

O. Barrau, C. Boher, G. R. , and F. Rezai-aria, Analysis of the friction and wear behaviour of hot work tool steel for forging, Wear, vol.255, issue.7-12, pp.1444-1454, 2003.
DOI : 10.1016/S0043-1648(03)00280-1

URL : https://hal.archives-ouvertes.fr/hal-01666713

E. Doege, H. Nagele, and U. Schliephake, Aspects of Wear Prediction in Precision Forging, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.1, issue.2, pp.111-119, 1994.
DOI : 10.1002/srin.199201729