. I. Références-bibliographiques-[-aaro70-]-h, K. R. Aaronson, and . Kinsman, The volume free energy change associated with precipitate nucleation, Scripta Metall, pp.101-106, 1970.

C. Aliaga, Simulation numérique par éléments finis en 3D du comportement thermomécanique au cours du traitement thermique d'aciers : application à la trempe de pièces forges ou coulées, Thèse Ecole Nationales Supérieure des mines de Paris, 2000.

M. F. Ashby, The deformation of plastically non-homogeneous materials, Philosophical Magazine, vol.245, issue.170, pp.399-424, 1970.
DOI : 10.1016/0001-6160(64)90034-3

C. Aubry, Modélisation et étude expérimentale des cinétiques de revenu/autorevenu d'acier trempes prévision des contraintes résiduelles de trempe dans un acier cémentite en, 1998.

G. Beranger, Le Livre de l'acier, Technique& Documentation Lavoisier, 1994.

J. Besson, R. Le-riche, R. Foerch, and G. Cailletaud, Application of object-oriented programming techniques to the finite element method. Part II-Application to material Behaviors, Revue européenne des éléments finis, pp.567-588, 1998.

H. K. Bhadeshia, Bainite in steels, The Institute of Materials, pp.292-299, 1992.

F. R. De-boer, R. Boom, W. C. Mattens, A. E. Miedema, and A. K. Niessen, Cohesion in Metals-Transition Metal Alloys, 1988.

R. Bonadé, P. Spätig, R. Schäublin, and M. Victoria, Plastic flow of martensitic model alloys, Materials Science and Engineering: A, vol.387, issue.389, pp.16-21, 2004.
DOI : 10.1016/j.msea.2004.02.074

M. Boufoussi, Modélisation thermique, métallurgique et mécanique du traitement thermique superficiel par faisceau laser, Thèse INPL, 1993.

R. L. Brown, H. J. Rack, and M. Cohen, Stress relaxation during the tempering of hardened steel, Materials Science and Engineering, vol.21, pp.25-34, 1975.
DOI : 10.1016/0025-5416(75)90194-9

J. F. Butler, Kinetics of the two-stage precipitation of carbon from ferrite, JISI, pp.127-133, 1966.

J. W. Cahn, Nucleation on dislocations, Acta Metallurgica, vol.5, issue.3, pp.169-173, 1957.
DOI : 10.1016/0001-6160(57)90021-4

R. W. Cahn and P. Haasen, Physical Metallurgy, Part II, 1983.

J. W. Cahn, F. Larchécail06-]-g, A. Cailletaud, . N. Longuetcaro72-]-r, G. Caron et al., A simple model for coherent equilibrium Tempering of Fe-C lath martensite Nucleation of secondary phase, Acta.Metall. Metallurgical Transactions Acta Metallurgica, vol.323, issue.3, pp.1915-1923, 1955.

W. C. Chiou-jr and E. A. Carter, Structure and stability of Fe3C-cementite surfaces from first principles, Surface Science, vol.530, issue.1-2, pp.88-100, 2003.
DOI : 10.1016/S0039-6028(03)00352-2

J. Chipman, Thermodynamics and phase diagram of the Fe-C system, Metallurgical and Materials Transactions B, vol.12, issue.no. 13, pp.55-64, 1972.
DOI : 10.1016/0001-6160(64)90002-1

J. W. Christian, Theory of Transformations in Metals and Alloys, 1975.

D. E. Coates, Diffusion controlled precipitate growth in ternary systems: II, Metallurgical Transactions, vol.40, issue.no. 4, pp.1077-1086, 1973.
DOI : 10.1139/p62-019

O. Cognye, Calculs micromécaniques par éléments finis (Sysweld) de champs de contraintes locaux associés à de la précipitation, 2003.

M. Cohen, Strengthening of steel, MSA Institute of Mining, Metallurgical and Petroleum Engineers, Transactions, vol.224, pp.638-657, 1962.

W. K. Choo and R. Kaplow, M??ssbauer measurements on the aging of iron-carbon martensite, Acta Metallurgica, vol.21, issue.6, pp.725-732, 1973.
DOI : 10.1016/0001-6160(73)90036-9

J. Daigne, M. Guttmann, and J. P. Naylor, The influence of lath boundaries and carbide distribution on the yield strength of 0.4% C tempered martensitic steels, Materials Science and Engineering, vol.56, issue.1, pp.1-10, 1982.
DOI : 10.1016/0025-5416(82)90176-8

S. K. Das, A. Biswas, and R. N. Ghosh, Volume fraction dependent particle coarsening in plain carbon steel, Acta Metallurgica et Materialia, vol.41, issue.3, pp.777-781, 1993.
DOI : 10.1016/0956-7151(93)90010-P

S. Denis, E. Gautier, A. Simon, and G. Beck, Stress???phase-transformation interactions ??? basic principles, modelling, and calculation of internal stresses, Materials Science and Technology, vol.200, issue.146, pp.805-814, 1985.
DOI : 10.1029/JB087iB08p06791

S. Denis, S. Sjöström, and A. Simon, Coupled temperature, stress, phase transformation calculation, Metallurgical Transactions A, vol.35, issue.6, pp.1203-1212, 1987.
DOI : 10.2355/isijinternational1966.22.504

S. Denis, D. Farias, and A. Simon, Mathematical Model Coupling Phase Transformations and Temperature Evolutions in Steels., ISIJ International, vol.32, issue.3, pp.316-325, 1992.
DOI : 10.2355/isijinternational.32.316

S. Denis, Prévision des contraintes résiduelles induites par traitement thermique et thermochimique, La revue de métallurgie-CIT/Science et genie des matériaux, pp.157-172, 1997.

S. Denis, Prediction of residual stress and distortion of ferrous and non-ferrous metals: Current status and future developments, Journal of Materials Engineering and Performance, vol.347, issue.9, pp.92-102, 2002.
DOI : 10.1179/026708395790164995

A. Deschamps and Y. Brechet, Influence of predeformation and ageing of an Al-Zn-Mg alloy-II

D. Hyukshin, K. Park, and Y. Kim, Formation of fine cementite precipitates in an ultra-fine grained low carbon steel, Scripta Materialia, vol.48, pp.469-473, 2003.

D. Dumont, A. Deschamps, Y. Bréchet, C. Sigli, and J. C. Ehrström, Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour, Materials Science and Technology, vol.45, issue.5, pp.1-10, 2004.
DOI : 10.1179/mst.1987.3.11.923

J. D. Eshelby, Progress in Solid Mechanics, VII, 1961.

. Eyzop, Caractérisation de couches cémentées en basse pression, Thèse INPL, 1964.

D. Godard, Influence de la précipitation sur le comportement thermomécanique lors de la trempe d'un alliage Al-Zn-Mg-Cu, Thèse INPL, 1999.

J. M. Génin, The clustering and coarsening of carbon multiplets during the aging of martensite from m??ssbauer spectroscopy: The preprecipitation stage of epsilon carbide, Metallurgical Transactions A, vol.206, issue.8, pp.1371-1388, 1987.
DOI : 10.1007/BF02647102

A. Habraken, Contribution à la modélisation du forge des metaux par la méthode des éléments finis, 1989.

B. Hoffmann, O. Vôhringer, and E. Macherauch, Effect of tempering on the microstructure and strength of martensitically hardened plain carbon steels, Materials Science and Engineering: A, vol.234, issue.236, pp.234-236, 2001.
DOI : 10.1016/S0921-5093(97)00272-4

H. Holzapfel, V. Schulze, O. Vöhringer, and E. Macherauch, Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures, Materials Science and Engineering: A, vol.248, issue.1-2, pp.248-257, 1998.
DOI : 10.1016/S0921-5093(98)00522-X

H. Zengshou and L. Guangxi, Physique Métallurgie, Presse des Sciences et des technologies de Shanghai, 1989.

. [. Jack, Structural transformations in the tempering of high-carbon martensitic steels, Journal of the iron and steel institute, pp.26-36, 1951.

W. C. Johnson and P. W. Voorhees, Phase equilibrium in two-phase coherent solids, Metallurgical Transactions A, vol.32, issue.7, pp.1213-1228, 1987.
DOI : 10.1007/978-1-4684-9336-8_1

W. C. Johnson and P. W. Voorhees, The coarsening kinetics of two misfitting particles in an anisotropic crystal, Acta Metallurgica et Materialia, vol.38, issue.7, pp.1349-1367, 1990.
DOI : 10.1016/0956-7151(90)90207-W

D. Y. Ju, M. Sahashi, T. Omori, and T. Inoue, Residual stresses and distortion of a ring in quenchingtempering process based on metallo-thermo-mechanics, Conf. sur la Trempe et le Contrôle de la Distorsion, pp.249-257, 1996.

R. Kampman and R. Wagner, Kinetic of precipitation in metastable binary alloy-theory and application to Cu-1,9at%Ti and Ni-14at%Al, Decomposition of Alloys: the early stages, pp.91-103, 1984.

I. Kaur, W. Gust, and L. Kozma, Handbook of grain and interface boundary diffusion data, 1982.

M. Kehoe and K. P. , The role of carbon in the strength of ferrous martensite, Scripta Metallurgica, vol.4, issue.6, pp.473-476, 1970.
DOI : 10.1016/0036-9748(70)90088-8

G. Krauss, Tempering and structural change in ferrous martensitic structures, Proc. of Int

K. J. Kozaczek, Effect of thermal exposure on surface residual stresses in gamma titanium aluminide, th International Conference on Residual Stresses, pp.281-286, 1997.

G. Langford and M. Cohen, Calculation of cell-size strengthening of wire-drawn iron, Metallurgical and Materials Transactions B, vol.197, issue.5, pp.1478-1480, 1970.
DOI : 10.1007/BF02900287

J. S. Langer and A. J. Schwartz, Kinetics of nucleation in near-critical fluids, Physical Review A, vol.8, issue.3, pp.948-958, 1980.
DOI : 10.1103/PhysRevA.8.2586

F. C. Larche and J. W. Cahn, Thermochemical equilibrium of multiphase solids under stress, Acta Metallurgica, vol.26, issue.10, pp.1579-1589, 1978.
DOI : 10.1016/0001-6160(78)90067-6

B. S. Lement and M. Cohen, A dislocation-attraction model for the first stage of tempering, Acta Metallurgica, vol.4, issue.5, pp.469-476, 1956.
DOI : 10.1016/0001-6160(56)90043-8

J. Lesage, Propriétés mécaniques et structurales des aciers carbonitrutés, Habilitation à diriger les recherches, Université des sciences et techniques de Lille Flandres-Artois Rhéologie de la déformation plastique d'un acier Fe-C durant sa transformation de phase, Thèsè INP Lorraine, 1988.

C. Liu and N. M. , Van der Pers etc., Lattice change of Iron-Carbon martensite on aging at room temperature, Metallurgical Transactions A, vol.22, pp.1957-1967, 1991.

C. C. Liu, X. J. Xu, and Z. Liu, A fem modelling of quenching and tempering and its application in industrial engineering, Finite Elemnts in Analysis and Design, pp.1053-1070, 2003.

S. Maropoulos, J. D. Paul, and N. Ridley, Microstructure???property relationships in tempered low alloy Cr???Mo???3??5Ni???V steel, Materials Science and Technology, vol.5, issue.11, pp.1014-1019, 1993.
DOI : 10.1007/BF02646352

M. K. Miller, P. A. Beaver, S. S. Brenner, and G. D. Smith, An atom probe study of the aging of Iron-Nickel-Carbon martensite, Metallurgical Transactions, vol.14, pp.1021-1031, 1983.

R. Millot, P. Archambault, and E. Gautier, Transformation of residual austenite under thermomechanical variations, Le Journal de Physique IV, vol.09, issue.PR9, pp.361-370, 1999.
DOI : 10.1051/jp4:1999937

E. Mittemeijer and I. A. Wierszyllowski, The isothermal and nonisothermal kinetics of tempering Iron-carbon and Iron-Nitrogen martensites and austenites, Zur Metallkunde, vol.82, pp.6-491, 1991.

M. Doi, Elasticity effects on the microstructure of alloys containing coherent precipitates, Progress in Materials Science, vol.40, issue.2, pp.79-180, 1996.
DOI : 10.1016/0079-6425(96)00001-1

E. J. Mittemeijer and L. Cheng, Analysis of nonisothermal transformation kinetics; tempering of iron-carbon and iron-nitrogen martensites, Metallurgical Transactions A, vol.9, issue.4, pp.925-932, 1988.
DOI : 10.2320/matertrans1960.11.145

O. R. Myhr and ?. Grong, Modelling of non-isothermal transformations in alloys containing a particle distribution, Acta Materialia, vol.48, issue.7, pp.1605-1615, 2000.
DOI : 10.1016/S1359-6454(99)00435-8

S. Nagakura and M. Toyoshima, Crystal structure and morphology of the ordered phase in Iron- Carbon martensite, Transaction of the JIM, pp.100-110, 1979.

S. Nagakura, Y. Hirotsu, M. Kusunoki, T. Suzuki, and Y. Nakamura, Crystallographic study of the tempering of martensitic carbon steel by electron microscopy and diffraction

L. A. Norstrom and O. Vingsbo, Influence of nickel on toughness and ductile-brittle transition in low-carbon martensite steels, Metal Science, vol.15, issue.12, pp.677-684, 1979.
DOI : 10.1007/978-1-4684-1860-6

A. Ohmori, S. Torizuka, and K. Nagai, Strain-hardening due to Dispersed Cementite for Low Carbon Ultrafine-grained Steels, ISIJ International, vol.44, issue.6, pp.1063-1071, 2004.
DOI : 10.2355/isijinternational.44.1063

R. A. Oriani, Ostwald ripening of precipitates in solid matrices, Acta Metallurgica, vol.12, issue.12, pp.1399-1409, 1964.
DOI : 10.1016/0001-6160(64)90128-2

Y. Renault, Etude expérimentale des cinétiques de revenu d'un acier 80Mncr5 après trempe martensitique, 2002.

C. S. Roberts, B. L. Averbach, and M. Cohen, The mechanism and kinetics of the first stage of tempering, Transactions of the A.S.M, vol.45, pp.576-603, 1953.

J. D. Robson, Modelling the overlap of nucleation, growth and coarsening during precipitation, Acta Materialia, vol.52, issue.15, pp.4669-4676, 2004.
DOI : 10.1016/j.actamat.2004.06.024

M. Saeglitz and G. Krauss, Deformation, fracture, and mechanical properties of low-temperature-tempered martensite in SAE 43xx steels, Metallurgical and Materials Transactions A, vol.16, issue.12, pp.377-387, 1997.
DOI : 10.1016/0001-6160(68)90031-X

G. Sauthoff, Orienting of precipitating gold particles in an Iron-Molybdenum-Gold alloy by external elastic stress, Frühjahrstagung Freudenstadt, vol.4, pp.1-5, 1974.

M. Serrière, Modélisation des processus de transformation des dispersoïdes dans un alliage d'aluminium 3003, 2004.

D. W. Smith and . Hehemann, Influence of structural parameters on the yield strength of tempered martensite and lower bainite, Journal of the iron and steel institute, pp.467-481, 1971.

A. Simon, Etude du revenu de la structure de trempe martensitique des alliages Fe-C-Si à forte teneur en carbone :Mécanismes de précipitation et de transformation des carbures, 1972.

S. Sjöström, Interactions and constitutive models for calculating quench stresses in steel, Materials Science and Technology, vol.10, issue.10, pp.823-829, 1982.
DOI : 10.1063/1.1750872

G. R. Speich, P. R. Swann, J. W. Stewart, R. C. Thomson, and H. K. Bhadeshia, Yield strength and transformation substructure of quenched Iron- Nickel alloys, Journal of the iron and steel institute Cementite precipitation during tempering of martensite under the influence of an externally applied stress, Journal of materials science, vol.20329, pp.480-94, 1965.

M. Stowell, Precipitate nucleation: does capillarity theory work?, Materials Science and Technology, vol.22, issue.2, pp.139-144, 2002.
DOI : 10.1103/PhysRevB.62.203

K. A. Taylor, G. B. Olson, M. Cohen, J. B. Vander-sandetayl89bis, ]. K. Taylor et al., Carbide precipitation during stage I tempering of Fe-Ni-C martensites, Spinodal decomposition during aging of Fe-Ni-C martensite, pp.2749-2765, 1989.
DOI : 10.1007/BF02670359

K. A. Taylor and M. Cohen, Aging of ferrous martensites, Progress in Materials Science, vol.36, pp.225-275, 1992.
DOI : 10.1016/0079-6425(92)90010-5

M. Veaux, Etude expérimentale et prévisions par le calcul des cinétiques de transformation de phase, des contraintes résiduelles et des déformations lors de la transformation bainitique, Thèse INPL, 2003.

D. Venugopalan, J. S. Kirlaldy, J. S. Doane, and . Kirkaldy, New relations for predicting the mechanical properties pof quenched and tempered low alloy steels, Hardenability Concepts, pp.249-267, 1978.

J. D. Verhoeven, Fundametals of Physical Metallurgy, 1975.

G. Vidal, P. Lesscop, and L. Raymondin, Influence de la temp??rature sur les constantes ??lastiques des m??taux et alliages, Revue de M??tallurgie, vol.48, issue.11, pp.864-874, 1951.
DOI : 10.1051/metal/195148110864

C. H. Young and H. K. Bhadeshia, Strength of mixtures of bainite and martensite, Materials Science and Technology, vol.183, issue.5, pp.209-220, 1994.
DOI : 10.1179/030634583790420600

C. Zener, Theory of Growth of Spherical Precipitates from Solid Solution, Journal of Applied Physics, vol.20, issue.10, pp.950-953, 1949.
DOI : 10.1063/1.1698257