. Cherkaoui, Micromechanical modeling of martensitic transformation induced plasticity (TRIP) in austenitic single crystals, International Journal of Plasticity, vol.14, issue.7, pp.597-626, 1998.
DOI : 10.1016/S0749-6419(99)80000-X

. Cherkaoui, Couplings between plasticity and martensitic phase transformation: overall behavior of polycrystalline TRIP steels, International Journal of Plasticity, vol.16, issue.10-11, pp.10-11, 2000.
DOI : 10.1016/S0749-6419(00)00008-5

. Chiou, Strain rate effects on the mechanical properties of a Fe???Mn???Al alloy under dynamic impact deformations, Materials Science and Engineering: A, vol.392, issue.1-2, pp.156-162, 2005.
DOI : 10.1016/j.msea.2004.09.055

W. K. Choo, J. H. Kim, and J. C. Yoon, Microsructural change in austenitic Fe-30%Mn-7.8%Al-1.3%C initiated by spinodal de composition and influence on mechanical properties, Acta )natw Deformation twinning, Progress in Materials Science, pp.4877-4885, 1995.

. Cotes, Fcc/Hcp martensitic transformation in the Fe-Mn system: Part II. Driving force and thermodynamics of the nucleation process, Metallurgical and Materials Transactions A, vol.25, issue.10, p.83, 2004.
DOI : 10.1016/0378-4363(81)91004-4

. Cotes, Fcc/Hcp martensitic transformation in the Fe-Mn system: Experimental study and thermodynamic analysis of phase stability, Metallurgical and Materials Transactions A, vol.36, issue.8, pp.1957-1969, 1995.
DOI : 10.2320/matertrans1989.34.489

. Cugy, A super-high strength Fe-Mn-C austenitic steel with excellent formability · for automobile applications, 2005.

D. Dai, Structural parameters of the martensite transformation for austenitic steels, Materials Characterization, vol.49, issue.4, p.367, 2003.
DOI : 10.1016/S1044-5803(03)00035-4

A. Desestret and J. Charles, Aciers inoxydables austénoferritiques, Les aciers inoxydables, Editions de physique, pp.631-677, 1990.

F. Grässel, O. Grässel, and G. Frommeyer, Effect of martensitic phase transformation and deformation twinning on mechanical properties of Fe???Mn???Si???AI steels, Materials Science and Technology, vol.16, issue.6, p.1213, 1998.
DOI : 10.1016/0956-716X(95)00193-Y

. Harjo, Measurements of thermal residual elastic strains in ferrite???austenite Fe???Cr???Ni alloys by neutron and X-ray diffractions, Acta Materialia, vol.47, issue.1, pp.353-362, 1999.
DOI : 10.1016/S1359-6454(98)00300-0

K. Hamada, NITRIC ACID RESISTANCE OF NEW TYPE Fe-Mn-Al STAINLESS STEELS, Canadian Metallurgical Quarterly, vol.26, issue.1, pp.41-48, 2006.
DOI : 10.1016/j.apsusc.2003.08.068

. Han, The role of deformation twinning on mechanical properties of an austenitic Fe???30Mn???1.2Al???0.3C alloy, Acta Metallurgica et Materialia, vol.39, issue.9, p.2169, 1991.
DOI : 10.1016/0956-7151(91)90186-5

S. V. Harren, The finite deformation of rate-dependent polycrystals???I. A self-consistent framework, Journal of the Mechanics and Physics of Solids, vol.39, issue.3, pp.345-383, 1991.
DOI : 10.1016/0022-5096(91)90017-I

S. Hauk, V. Hauk, and P. Stuitje, X-ray studies of phase-specific residual stresses of heterogeneous materials after plastic deformations, part I, Z. Metallkd, vol.76, pp.445-451, 1985.

S. Hauk, V. Hauk, and P. Stuitje, Studies of phase-specific residual stresses with x-rays on heterogeneous alloys after plastic deformation, part II, Z. Metallkd, vol.76, pp.471-474, 1985.

A. Hershey, The Elasticity of an Isotropic Aggregate of Anisotropic Cubic Crystals, ASME J. Appl. Mech, vol.21, p.236, 1954.

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, p.89, 1965.
DOI : 10.1016/0022-5096(65)90023-2

H. , H. Hong, S. H. Han, and Y. S. , Effect of Solution Treatment on the Stress-Rupture Property of MA ODS Ni-base Superalloy, Scripta Metallurgica et Materialia, vol.32, pp.1489-1494, 1995.

W. F. Hosford, The Mechanics of Crystals and Textured Polycrystals, p.163, 1993.

. Huang, Deformation twinning in polycrystalline copper at room temperature and low strain rate, Acta Materialia, vol.54, issue.3, pp.54-655, 2006.
DOI : 10.1016/j.actamat.2005.10.002

. Karaman, Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip, Acta Materialia, vol.48, issue.9, pp.2031-2047, 2000.
DOI : 10.1016/S1359-6454(00)00051-3

S. R. Kalidindi, Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals, International Journal of Plasticity, vol.17, issue.6, pp.837-860, 2001.
DOI : 10.1016/S0749-6419(00)00071-1

S. R. Kalidindi, Incorporation of deformation twinning in crystal plasticity models, Journal of the Mechanics and Physics of Solids, vol.46, issue.2, pp.267-290, 1998.
DOI : 10.1016/S0022-5096(97)00051-3

. Kaschner, Role of twinning in the hardening response of zirconium during temperature reloads, Acta Materialia, vol.54, issue.11, pp.54-2887, 2006.
DOI : 10.1016/j.actamat.2006.02.036

. Kim, Low temperature mechanical behavior of microalloyed and controlled-rolled Fe-Mn-Al-C-X alloys, Metallurgical Transactions A, vol.56, issue.9, p.1689, 1985.
DOI : 10.1179/030634582790427316

H. Kim, Y. G. Kim, J. M. Han, and J. S. Lee, Composition and temperature dependence of tensile properties of austenitic Fe???Mn???Al???C alloys, Materials Science and Engineering: A, vol.114, p.51, 1989.
DOI : 10.1016/0921-5093(89)90844-7

R. Kouddane, A. Molinari, and G. R. Canova, Self-consistent modelling of heterogeneous viscoelastic and elastoplastic materials, in : Large plastic deformations, Fundamentals and application to metal forming, pp.129-141, 1993.

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, p.155, 1961.
DOI : 10.1016/0001-6160(61)90060-8

E. Kröner, Statistical Continuum Mechanics. CISM Courses and Lectures No. 92, p.90, 1972.

I. A. Kunin, Elastic Media with Microstructure II: Three-Dimensional Models, 1983.
DOI : 10.1007/978-3-642-81960-5

. Lahaie, A note on the deformation of fine grained magnesium alloys, Scripta Metallurgica et Materialia, vol.27, issue.2, pp.139-142, 1992.
DOI : 10.1016/0956-716X(92)90102-K

N. Laws and R. Mclaughlin, Self-Consistent Estimates for the Viscoelastic Creep Compliances of Composite Materials, Proc. Roy. Soc. London A 359, pp.251-273, 1978.
DOI : 10.1098/rspa.1978.0041

P. Lecroisey, F. Lecroisey, and A. Pineau, Martensitic transformations induced by plastic deformation in the Fe-Ni-Cr-C system, Metallurgical and Materials Transactions B, vol.2, issue.2, pp.387-396, 1972.
DOI : 10.1007/BF02814874

K. Lim, A flow equation and its application to the austenitic high manganese steels, Materials Science and Engineering: A, vol.141, issue.1, pp.141-67, 1991.
DOI : 10.1016/0921-5093(91)90709-V

P. Lipinski-et-berveiller-lipinski and M. Berveiller, Elastoplasticity of micro-inhomogeneous metals at large strains, International Journal of Plasticity, vol.5, issue.2, pp.149-172, 1989.
DOI : 10.1016/0749-6419(89)90027-2

. Liu, Experimental study of the phase equilibria in the Fe-Mn-Al system, Metallurgical and Materials Transactions A, vol.8, issue.9, p.2429, 1996.
DOI : 10.1007/BF02879428

. Lubenets, Dynamics of twinning in metals and alloys, physica status solidi (a), vol.6, issue.1, pp.95-106, 1985.
DOI : 10.1098/rspa.1969.0046

S. Mahajan and G. Y. Chin, Formation of deformation twins in f.c.c. crystals Acta Metallurgica, pp.1353-1363, 1973.

Z. Masson, R. Masson, and A. Zaoui, Self-consistent estimates for the rate-dependentelastoplastic behaviour of polycrystalline materials, Journal of the Mechanics and Physics of Solids, vol.47, issue.7, pp.1543-1568, 1999.
DOI : 10.1016/S0022-5096(98)00106-9

L. Marcinkowski, M. J. Marcinkowski, and H. A. Lipsitt, The plastic deformation of chromium at low temperatures, Acta Metallurgica, vol.10, issue.2, pp.95-111, 1962.
DOI : 10.1016/0001-6160(62)90055-X

. Marketz, On the role of twinning during room temperature deformation of ??-TiAl based alloys, Materials Science and Engineering: A, vol.329, issue.331, pp.329-331, 2002.
DOI : 10.1016/S0921-5093(01)01558-1

. Meyers, The effect of grain size on the high-strain, high-strain-rate behavior of copper, Metallurgical and Materials Transactions A, vol.1, issue.c3, pp.2881-2893, 1995.
DOI : 10.1016/0921-5093(91)90391-Y

. Meyers, The onset of twinning in metals: a constitutive description, Acta Materialia, vol.49, issue.19, pp.49-4025, 2001.
DOI : 10.1016/S1359-6454(01)00300-7

. Molinari, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

W. B. Morrison, Effect of grain size on the stress-strain relationship in lowcarbon steel, Trans. ASM, vol.59, pp.824-870, 1966.

K. Mulford, R. A. Mulford, and U. F. Kocks, New observations on the mechanisms of dynamic strain aging and of jerky flow, Acta Metallurgica, vol.27, issue.7, pp.1125-1134, 1979.
DOI : 10.1016/0001-6160(79)90130-5

N. Et-obatanasser, S. Obata, and M. , Rate dependent, finite elastoplastic deformation of polycrystals, Proc. Roy. Soc. London A 407, pp.343-375, 1986.

. Paquin, Berveiller, 1999. M. Integral formulation and self-consistent modelling of elastoviscoplastic behaviour of heterogeneous materials, 1999.

. Paquin, Micromechanical modeling of the elastic???viscoplastic behavior of polycrystalline steels, International Journal of Plasticity, vol.17, issue.9, pp.1267-1302, 2001.
DOI : 10.1016/S0749-6419(00)00047-4

. Parisot, Modeling the mechanical behavior of a multicrystalline zinc coating on a hot-dip galvanized steel sheet, Computational Materials Science, vol.19, issue.1-4, pp.189-204, 2000.
DOI : 10.1016/S0927-0256(00)00155-5

. Proust, Modeling texture, twinning and hardening evolution during deformation of hexagonal materials, Acta Materialia, vol.55, issue.6, pp.55-2137, 2007.
DOI : 10.1016/j.actamat.2006.11.017

R. Rémy, Maclage et transformation martensitique CFC HC induite par déformation plastique dans les alliages austénitiques à basse énergie de défaut d'empilement des systèmes Co-Ni ? Cr-Mo?Fe-Mn-Cr-C, 1975.

R. E. Hill, Chapter 11 Role of deformation twinning in determining the mechanical properties of metals, in The Inhomogeneity of Plastic Deformation, pp.285-311, 1973.

A. Reuss, Calculation of the flow limits of mixed crystals on the basis of the plasticity of monocrystals, Z. angnew. Math Mech, vol.19, pp.49-58, 1929.

R. H. Richman, The diversity of twinning in body-centered cubic structures, 1964.

. Rohatgi, The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery, Metallurgical and Materials Transactions A. 32A, pp.135-145, 2001.
DOI : 10.1115/1.3443340

S. Srinivasa, A phenomenological model of twinning based on dual reference structures, Acta Materialia, vol.46, issue.4, pp.1235-1248, 1998.
DOI : 10.1016/S1359-6454(97)00300-5

S. M. Schlögl and F. D. Fischer, The role of slip and twinning in the deformation behaviour of polysynthetically twinned crystals of TiAl: A micromechanical model, Philosophical Magazine A, vol.46, issue.3, pp.621-636, 1997.
DOI : 10.1016/0921-5093(94)03206-8

A. Staroselsky, A. Staroselsky, A. , and L. , Inelastic deformation of polycrystalline face centered cubic materials slip and twinning, Journal of the mechanics and physics of solids, pp.4-671, 1998.

S. G. Song, G. T. Gray, and . Iii, Influence of temperature and strain rate on slip and twinning behavior of zr, Metallurgical and Materials Transactions A, vol.41, issue.10, pp.2665-2675, 1995.
DOI : 10.1016/0956-7151(93)90130-K

. Sabar, A new class of micro???macro models for elastic???viscoplastic heterogeneous materials, International Journal of Solids and Structures, vol.39, issue.12, pp.3257-3276, 2002.
DOI : 10.1016/S0020-7683(02)00256-1

URL : https://hal.archives-ouvertes.fr/hal-00128381

P. Suquet, Elements of homogeneization for inelastic solid mechanics In : Homogeneization Techniques for composite media, pp.193-278, 1985.

. Tabourot, Generalised constitutive laws for fcc single crystals, pp.234-236, 1997.

G. Taylor, Plastic strain in metals, J. Inst. Met, vol.62, pp.307-324, 1938.