A. , N. Bern, M. , K. , and M. , A new Voronoi-based surface reconstruction algorithm, Proceedings of SIGGRAPH 98, pp.415-422, 1998.

A. , N. Kohl, and T. , Numerical simulation of 3-d thermal fields from gocad geological models, 23rd Gocad Meeting Proceedings, p.31, 2003.

R. O. Baker, S. Kuppe, and S. Chugh, Full-Field Modeling Using Streamline-Based Simulation: Four Case Studies, SPE Reservoir Simulation Symposium, p.31, 2001.
DOI : 10.2118/77172-PA

T. J. Baker, Mesh Movement and Metamorphosis, Proceedings of the Tenth International Meshing Roundtable. Albuquerque, NM : Sandia National Laboratories, pp.387-396, 2001.
DOI : 10.1007/s003660200017

URL : http://www.imr.sandia.gov/papers/imr10/baker01.ps.gz

B. , J. A. Mortimer, R. John, and J. H. , Displacement geometry in the volume containing a single normal fault, AAPG Bulletin, vol.71, issue.8, pp.925-937, 1987.

B. , D. Gerber, and D. , Arbitrary shaped deformations with dogme. The Visual Computer, pp.2-3, 2003.

. Bidmon, R. Katrin, . Dirc, and T. Ertl, Intuitive, interactive, and robust modification and optimization of finite element models, Proceedings 13th International Meshing Roundtable, pp.59-69, 2004.

J. Bloomenthal, Polygonization of implicit surfaces, Computer Aided Geometric Design, vol.5, issue.4, pp.341-355, 1988.
DOI : 10.1016/0167-8396(88)90013-1

M. J. Blunt, K. Liu, T. Et, and M. R. , A generalized streamline method to predict reservoir flow. Petroleum Geoscience, pp.259-269, 1996.

B. , U. D. Et, and S. Han-wei, Space efficient fast isosurface extraction for large datasets, VIS '03 : Proceedings of the 14th IEEE Visualization 2003, pp.201-208, 2003.

B. , P. Bechmann, and D. , Deformation of n-dimensional objects, International Journal of Computational Geometry & Applications (Special Issue : Solid Modeling II), vol.1, issue.4, pp.427-453, 1991.

M. Botsch, D. Bommes, K. , and L. , Efficient Linear System Solvers for Mesh Processing, Lecture Notes in Computer Science, pp.62-83, 2005.
DOI : 10.1007/11537908_5

. Buatois, C. Luc, G. , and L. Bruno, Gpu accelerated isosurface extraction on complex polyhedral grids, 26th Gocad Meeting Proceedings, p.48, 2006.
DOI : 10.1007/11919476_39

URL : http://alice.loria.fr/publications/papers/2006/ISOS_ISVC/ISVC06_BuatoisEtAl.pdf

C. , M. Ledoux, E. De-marsily, and G. , Modeling fracture flow with a stochastic discrete fracture network : Calibration and validation -1. the flow model, Water Resources Research, vol.26, issue.3, pp.479-489, 1990.

C. , J. C. Beatson, R. K. , C. , and J. B. , Reconstruction and representation of 3d objects with radial basis functions, ACM SIGGRAPH 2001, Computer Graphics Proceedings, pp.67-76, 2001.

C. Guillaume, . Lepage, . François, and C. H. Sword, Building and editing a sealed geological model, Mathematical Geology, vol.36, issue.25, pp.405-424, 2004.

C. , G. Lévy, D. Bruno, and G. , Volume rendering unstructured grids with cellular graphs, 22nd Gocad Meeting Proceedings, p.55, 2002.

C. , G. , S. , C. H. Et, and M. Jean-laurent, Interactive editing of sealed geological 3d models, In International Association of Mathematical Geology. Berlin, vol.117, issue.121, p.122, 2002.

C. , G. , T. , A. Zhang, and L. , Elements for stochastic structural perturbation of stratigraphic models, Proceedings of Petroleum Geostatistics, p.155, 2007.

C. , Y. ?. Kuang, R. Alyn, and P. , A generalized de casteljau approach to 3d freeform deformation, ACM SIGGRAPH 94, pp.257-260, 1994.

C. , S. , D. Tamal, and K. , Quality meshing with weighted delaunay refinement, Proc. 13th ACM-SIAM Sympos. Discrete Alg, pp.137-146, 2002.

C. , J. , A. Christophe, and A. Guillen, Modelling the geometry of geological units and its uncertainty in 3d from structural data : The potential-field method, Proceedings of Orebody Modelling and Strategic Mine Planning, pp.313-320, 2004.

C. , R. La-méthode, and D. S. , optimisation, implémentation et applications, Th. Doct. Institut National Polytechnique de Lorraine, p.41, 1996.

C. , E. J. Beatson, R. K. , R. , and H. J. , Practical implicit geological modelling, 5th International Mining Geology Conference, p.117, 2003.

C. , B. , D. , J. Mcmillan, and L. , A procedural approach to authoring solid models, SIGGRAPH '02 : Proceedings of the 29th annual conference on Computer graphics and interactive techniques, pp.302-311, 2002.

D. , T. K. Giesen, J. , H. , and J. , Delaunay based shape reconstruction from large data, PVG '01 : Proceedings of the IEEE 2001 symposium on parallel and large data visualization and graphics, pp.19-27, 2001.

D. , T. K. Et, and G. Samrat, Tight cocone : a water-tight surface reconstructor, SM '03 : Proceedings of the eighth ACM symposium on Solid modeling and applications, pp.127-134, 2003.

D. , G. M. Et, E. Parris, and K. , A gestural interface to free-form deformation, Graphics Interface, pp.113-120, 2003.

N. Euler, Modélisation volumique, contraintes et libertés. Th. Doct. Institut National Polytechnique de Lorraine, pp.88-96, 1999.

N. Euler, C. H. Sword, D. Et, and . Jean-claude, A new tool to seal a 3D Earth Model : a cut with constraints. SEG Technical Program Expanded Abstracts, pp.710-713, 1998.

N. Euler, C. H. Sword, D. Et, and . Jean-claude, Editing and rapidly updating a 3d earth model. SEG Technical Program Expanded Abstracts, pp.950-953, 1999.

F. , P. Van-de-panne, M. Et, T. , and D. , Dynamic free-form deformations for animation synthesis, IEEE Transactions on Visualization and Computer Graphics, vol.3, issue.3, pp.201-214, 1997.

F. , M. S. Et, and K. Hormann, Surface Parameterization : a Tutorial and Survey. In Advances in multiresolution for geometric modelling, pp.157-186, 2005.

F. , T. , and M. Jean-laurent, Exploring the tetrahedral decomposition of the subsurface, 24th Gocad Meeting Proceedings, p.46, 2004.

F. , T. , T. , A. Et, and M. Jean-laurent, Implicit reconstruction of complex geological surfaces, 25th Gocad Meeting Proceedings, pp.48-53, 2005.

S. Geiger, R. Stephen, M. , and S. K. , Modelling multi-phase flow in the earth's crust using node-centred finite volumes on unstructured finite element grids, School of Mathematical Sciences, p.31, 2001.

G. , H. Reinhardsen, J. E. Et, Å. , and K. , Computer representation of complex 3-d geological structures using a new "solid modeling" technique. Geophysical Prospecting, pp.1195-1211, 1985.

B. Gregorski, . Senecal, D. Joshua, and A. Mark, Adaptive extraction of time-varying isosurfaces, IEEE Transactions on Visualization and Computer Graphics, vol.10, issue.6, pp.683-694, 2004.
DOI : 10.1109/TVCG.2004.35

G. , P. Jones, S. Salter, and N. , A new technique for 3-D flexural-slip restoration, Journal of Structural Geology, vol.24, issue.4, pp.773-782, 2002.

O. Grosse, Remise en cohérence d'un modèle géologique 3D. Th. Doct. Institut National Polytechnique de Lorraine, pp.122-123, 2002.

A. Guillen, . Calcagno, . Philippe, and G. Courrioux, Coupling 3d modelling and forward-inverse modelling of potential field data (gravity and magnetic data and tensor components), Proceedings of the XIth International Congress for Mathematical Geology, p.48, 2006.

H. Gentaro, L. , M. C. Et, M. , and R. , Fast volume-preserving free form deformation using multi-level optimization, ACM SMA 99, pp.234-245, 1999.

H. , K. S. Neave, J. W. Et, N. Erk, and H. , Application of the fused fault block method in structural modeling and reservoir gridding of complex structures, SEG Technical Program Expanded Abstracts, pp.1678-1682, 2006.

H. Hoppe, . Derose, . Tony, and T. Duchamp, Surface reconstruction from unorganized points, ACM SIGGRAPH Computer Graphics, vol.26, issue.2, pp.71-78, 1992.
DOI : 10.1145/142920.134011

H. , W. M. Hughes, J. F. Kaufman, and H. , Direct manipulation of free-form deformations, Computer Graphics, vol.26, issue.2, pp.177-184, 1992.

H. , J. Qin, and H. , Free-form deformations via sketching and manipulating scalar fields, ACM SM 03, pp.328-333, 2003.

J. , J. Jourde, H. Fénard, and P. , A three-dimensional model to simulate joint networks in layered rocks, Canadian Journal of Earth Sciences, vol.39, issue.10, pp.1443-1455, 2002.

K. , T. Stegmaier, S. Et, E. , and T. , Hardware-accelerated Reconstruction of Polygonal Isosurface Representations on Unstructured Grids, Proceedings of Pacific Graphics '04, pp.186-195, 2004.

K. , R. , S. , J. Richard, O. Brien et al., Spectral surface reconstruction from noisy point clouds, Proceedings of the 2004 Eurographics/ACM SIG- GRAPH symposium on Geometry processing, pp.11-21, 2004.

L. Mélinaire and P. , Modélisation de relations géométriques par la méthode DSI ? application à la géologie, Th. Doct. Institut National Polytechnique de Lorraine, p.65, 1992.

B. Leflon, Modélisation des hétérogénéités lithologiques à l'échelle du réservoir pétrolier en millieu marin et fluviatile, Th. Doct. Institut National Polytechnique de Lorraine, pp.16-104, 2005.

L. , A. E. Kniss, J. M. Hansen, and C. D. , Interactive deformation and visualization of level set surfaces using graphics hardware, Proceedings of IEEE Visualization, pp.75-82, 2003.

F. Lepage, Génération de maillages tridimensionnels pour la simulation des phénomènes physiques en géosciences. Th. Doct. Institut National Polytechnique de Lorraine, pp.110-112, 2003.

L. Bruno, C. Guillaume, C. , and S. , Circular incident edge lists : a data structure for rendering complex unstructured grids, IEEE Visualization, p.47, 2001.

L. , B. , and M. Jean-laurent, Constrained discrete fairing for arbitrary meshes, INRIA Lorraine, p.40, 1999.

L. Bruno, P. , S. Ray, and N. , Least square conformal maps for automated texture atlas generation, SIGGRAPH, p.105, 2002.

L. , W. E. Et, C. Harvey, and E. , Marching cubes : A high resolution 3d surface construction algorithm, pp.163-169, 1987.

M. , L. , M. , P. , and M. Jean-laurent, Integration of fracture data into 3d geomechanical modeling to enhance fractured reservoirs characterization, SPE Annual Technical Conference and Exhibition, pp.9-31, 2005.

M. , L. Souche, L. Et, M. , and J. , 3d fracture characterization based on geomechanics and geologic data uncertainties, 9th European Conference on the Mathematics of Oil Recovery (ECMOR), p.31, 2004.

M. , B. K. Et, S. Brackin, and A. , 3-D anisotropic ray tracing on a tetrahedral mesh. SEG Technical Program Expanded Abstracts, pp.1973-1974, 1998.

M. , J. Moyen, . Rémi, and T. Frank, Getting rid of stratigraphic grids, 66th EAGE annual meeting, p.31, 2004.

M. , S. F. Juanes, R. , T. Hamdi, and A. , Tracing streamlines on unstructured grids from finite volume discretizations, Proceedings of the SPE Annual Technical Conference and Exhibition, p.31, 2006.

M. , B. Amenta, N. Velho, and L. , Surface reconstruction for noisy point clouds, SGP '05 : Proceedings of the 2005 Eurographics/ACM SIGGRAPH symposium on Geometry processing, pp.53-62, 2005.

M. , A. Roerdink, J. B. Et, H. , and W. H. , A general algorithm for computing distance transforms in linear time, Mathematical Morphology and its Applications to Image and Signal Processing, pp.331-340, 2000.

N. Molino, . Bridson, . Robert, and J. Teran, A crystalline, red green strategy for meshing highly deformable objects with tetrahedra, Proceedings of the 12th International Meshing Roundtable. Albuquerque, NM : Sandia National Laboratories, pp.103-114, 2003.

M. , B. S. Yoo, T. S. Chen, and D. T. , Interpolating implicit surfaces from scattered surface data using compactly supported radial basis functions, SMI '01 : Proceedings of the International Conference on Shape Modeling & Applications, pp.89-98, 2001.

R. Moyen, Building 3D vectorial links on unstructured volumic meshes, 24th Gocad Meeting Proceedings, p.105, 2004.

R. Moyen, Paramétrisation 3D en géologie sédimentaire : le modèle GeoChron. Th. Doct. Institut National Polytechnique de Lorraine, pp.33-146, 2005.

M. , R. , and M. Jean-laurent, Building a consistent GeoChron model in gOcad, 24th Gocad Meeting Proceedings, p.31, 2004.

P. Muron, Méthodes numériques 3D de restauration des structures géologiques faillées, Th. Doct. Institut National Polytechnique de Lorraine, p.30, 2005.

P. Muron, T. Anne-laure, M. , and J. , An efficient and extensible interpolation framework based on the matrix formulation of the discrete smooth interpolation, 25th Gocad Meeting Proceedings, p.49, 2005.

N. , A. Sorkine, O. Alexa, and M. , A sketch-based interface for detail-preserving mesh editing, ACM Transactions on Graphics, vol.24, issue.3, p.121, 2005.

O. , Y. Belyaev, A. G. Alexa, and M. , Multi-level partition of unity implicits, ACM Transaction on Graphics, vol.22, issue.3, pp.463-470, 2003.

P. Mathieu, E. , M. G. Blunt, and M. J. , Streamline tracing on curvilinear structured and unstructured grids, Proceedings of the SPE Reservoir Simulation Symposium, p.31, 2001.
DOI : 10.2523/66347-ms

P. Mathieu, . Lepage, D. François, and L. J. , Unstructured 3d gridding and upscaling for coarse modelling of geometrically complex reservoirs, Petroleum Geoscience, vol.11, issue.4, pp.339-345, 2005.

R. , C. V. Gupta, D. Shivakant, and A. , Automated three dimensional delaunay triangulation of domains with curved boundary surfaces, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), p.107, 2000.

R. , F. Dachsbacher, . Carsten, and M. Stamminger, Realtime isosurface extraction with graphics hardware, Eurographics 2004, Short Presentations and Interactive Demos. INRIA and Eurographics Association, pp.33-36, 2004.

S. , S. Hakenberg, J. Et, W. , and J. , Smooth subdivision of tetrahedral meshes, Proceedings of the 2004 Eurographics/ACM SIGGRAPH symposium on Geometry processing, pp.147-154, 2004.

S. , S. Et, E. , and G. , Discontinuous free form deformations, Pacific Conference on Computer Graphics and Applications, pp.227-236, 2004.

S. , T. W. Et, P. , and S. R. , Free-form deformation of solid geometric models, Computer Graphics, vol.119, pp.151-160, 1986.

E. Seveno, Towards an adaptive advancing front method, Proceedings of the 6th International Meshing Roundtable. Albuquerque, NM : Sandia National Laboratories, pp.349-362, 1997.

S. and J. Richard, An introduction to the conjugate gradient method without the agonizing pain, p.43, 1994.

S. , S. M. Et, V. Stephen, and A. , A mesh warping algorithm based on weighted laplacian smoothing, International Meshing Roundtable. Albuquerque, NM, USA : Sandia National Laboratories, pp.147-158, 2003.

L. Souche, Méthodes numériques pour la représentation des failles et des structures géologiques faillées, Th. Doct. Institut National Polytechnique de Lorraine, p.82, 2005.

. Suzuki, . Hiromasa, . Sakurai, . Yusuke, and T. Kanai, Interactive mesh dragging with an adaptive remeshing technique, The Visual Computer, pp.159-176, 2000.

T. , A. , F. , T. , and M. Jean-laurent, Real-time tetrahedral volume editing accounting for discontinuities, 9th International Conference on Computer Aided Design and Computer Graphics, p.148, 2005.

T. , A. Et, M. Jean-laurent, T. , A. Et et al., Surface reconstruction and fitting from dense point sets Editing Faults within Tetrahedral Volume Models in Real Time, 25th Gocad Meeting Proceedings. Nancy, France : ASGA, 2005. 42 Structurally Complex Reservoirs, p.142, 2007.

T. , G. M. Prager, R. W. Et, G. , and A. H. , Regularised marching tetrahedra : improved iso-surface extraction. Computers and Graphics, pp.583-598, 1999.

T. , G. , O. Brien, and J. F. , Shape transformation using variational implicit functions, SIGGRAPH '99 : Proceedings of the 26th annual conference on Computer graphics and interactive techniques, pp.335-342, 1999.

. Várady, M. Tamás, R. R. Et, C. , and J. , Reverse engineering of geometric models???an introduction, Computer-Aided Design, vol.29, issue.4, pp.255-268, 1997.
DOI : 10.1016/S0010-4485(96)00054-1

V. , T. I. Et, S. , and B. , A mass-spring model for real time deformable solids, Proceedings of East-West Vision, pp.149-154, 2002.

W. Velten, Effective Seismic Modeling in 3D Earth Models, Th. Doct. Institut National Polytechnique de Lorraine, p.30, 1998.

S. Verma, Flexible Grids for Reservoir Simulation, Th. Doct. Stanford University. California, U.S.A, p.31, 1996.

V. Rymon-lipinski, . Bartosz, . Hanssen, . Nils, and T. Jansen, Efficient pointbased isosurface exploration using the span-triangle, Proceedings of the conference on Visualization'04, pp.441-448, 2004.

Y. , S. Shimada, and K. , High quality anisotropic tetrahedral mesh generation via ellipsoidal bubble packing, Proceedings of the 9th International Meshing Roundtable : Sandia National Laboratories, pp.263-273, 2000.