P. [. Agassant, J. P. Avenas, and . Sergent, La mise en forme des matières plastiques, 1989.

P. [. Agassant, J. Avenas, B. Sergent, M. Vergnes, and . Vincent, La mise en forme de matières plastique, 1996.

J. Alexis, A. Parisant02, ]. C. Antonio, and N. M. Dourado, Pratique industrielle de la méthode TaguchiMetal-forming process optimization by inverse evolutionary search, Journal of Materials Processing Technology, vol.121, pp.403-413, 1995.

R. [. Armentano, . N. Duránarn84-]-d, F. Arnold, M. Brezzi, and . Fortin, Error estimates for moving least square approximations, Applied Numerical Mathematics, vol.37, issue.3, pp.397-416337, 1984.
DOI : 10.1016/S0168-9274(00)00054-4

G. Ayad, T. Barriere, J. C. Gelin, J. Song, B. Liu et al., Optimization of the PIM process: Segregation in injection and the parameters for sintering simulation, proceedings of APOMAT, pp.164-173, 2005.

R. Bahloul, S. B. Eléchi, P. D. Santo, and A. Potiron, Optimisation of L-bending process : a comparison between Response Surface, Moving Least Squares and Evolution Strategies Methods, Proceedings of APOMAT, pp.120-131, 2005.

D. [. Balasubrahman and . Kazmer, Thermal control of melt flow in cylindrical geometriesThermique multidomaines en simulation numérique du remplissage 3D, SPE Annual Technical Conference Thèse de doctorat, pp.387-391, 2002.

J. [. Batkam, T. Bruchon, and . Coupez, A Space-Time Discontinuous Galerkin Method for Convection and Diffusion in Injection Moulding, International Journal of Forming Processes, vol.7, issue.1-2, pp.11-33, 2004.
DOI : 10.3166/ijfp.7.11-33

URL : https://hal.archives-ouvertes.fr/hal-00614585

[. Extrusionstechnik, Installations d'extrusion de tubes, Symposium tube, 2005.

Y. [. Belytschko, D. Krongauz, M. Organ, and P. Fleming, Meshless methods: An overview and recent developments, Thèse de doctorat, pp.3-47, 1996.
DOI : 10.1016/S0045-7825(96)01078-X

URL : http://www.cs.rutgers.edu/~suejung/seminar/Belytschko1996.pdf

B. Ayed, L. Delamézière, A. Batoz, J. L. Knopf-lenoir, and C. , Optimization of the blankholder force distribution with application to the stamping of a car front door panel (Numisheet???99), AIP Conference Proceedings, pp.15-19, 2005.
DOI : 10.1063/1.2011328

B. Ayed, L. Delamézière, A. Batoz, J. L. Knopf-lenoir, and C. , Optimization of the blankholder force distribution in deep drawing, APOMAT Conference, Automatic Process Optimization in Materials Technology, pp.30-31, 2005.

. [. Bigot, Simulation tridimensionnelle du remplissage de corps mince par injection, Thèse de doctorat, 2001.

T. [. Bigot and . Coupez, Capture of 3d moving free surfaces and material interfaces by mesh deformation, European Congress on Computational Methods in Applied Sciences and Engineering, 2000.

J. [. Boggs and . Tolle, Sequential Quadratic Programming, Acta Numerica, vol.1991, pp.1-51, 1995.
DOI : 10.1007/BF01580366

J. [. Bonnans, C. Gilbert, and C. Lemaréchal, Optimisation numérique: aspects théories et pratiques, Mathématique et applications 27, 1997.

]. M. Bon05a, A. H. Bonté, J. Van-den-boogaard, and . Huétink, Metamodelling techniques for the optimisation of metal forming processes, Proceedings of ESAFORM, pp.155-158, 2005.

]. M. Bon05b, A. H. Bonté, J. Van-den-boogaard, and . Huétink, Solving optimisation problems in metal forming using finite element simulation and metamodelling techniques, Proceedings of APOMAT, pp.242-251, 2005.

H. Brod, Residence time optimised choice of tube diameters and slit heights in distribution systems for non-Newtonian liquids, Journal of Non-Newtonian Fluid Mechanics, vol.111, issue.2-3, pp.107-125, 2003.
DOI : 10.1016/S0377-0257(03)00040-5

. [. Bruchon, Etude de la formation d'une structure de mousse par simulation directe de l'expansion de bulles dans une matrice liquide polymère, Thèse de doctorat, 2004.

. [. Busuladzic, Modélisation des éléments de mélange en extrusion par la méthode des éléments de frontières, Thèse de doctorat, 2004.

J. [. Carneiro, F. T. Nóbrega, P. J. Pinho, and . Oliveira, Automatic balancing of profile extrusion dies: Experimental assessment, SPE Annual Technical Conference, pp.91-95, 2004.

J. [. Carneiro, F. T. Nóbrega, P. J. Pinho, and . Oliveira, Computer aided rheological design of extrusion dies for profiles, Journal of Materials Processing Technology, vol.114, issue.1, pp.75-86, 2001.
DOI : 10.1016/S0924-0136(01)00574-X

]. R. Che97a, H. H. Chen, C. Y. Lee, and . Yu, Application of Taguchi's method on the optimal process design of an injection molded PC/PBT automobile bumperOptimization of the Coathanger manifold via computer simulation and orthogonal array method, Composite Structures Polymer Engineering and Science, vol.39, issue.371, pp.209-214, 1997.

. [. Combeaud, Etude des instabilités volumiques en extrusion de polystyrène et polypropylène, Thèse Doctorat. Ecole Nationale Supérieure des Mines de Paris, 2004.

S. [. Chung and . Hwang, Application of a genetic algorithm to the optimal design of the die shape in extrusion, Journal of Materials Processing Technology, vol.72, issue.1, pp.69-77, 1997.
DOI : 10.1016/S0924-0136(97)00131-3

[. Extrusion, Large pipe extrusion, Symposium tube, 2005. [COU91] T. Coupez "Grandes transformations et remaillage automatique Thèse de doctorat, 1991.

A. [. Coupez and . Nouatin, Optimisation of Forming by using the Simplex Method and Preliminary Results on an Explicit 3D Viscoelastic Solution, Proceedings of ESAFORM, pp.477-480, 1999.

A. Delamézière, H. Naceur, P. Breitkopf, C. Knopf-lenoir, J. L. Batoz et al., Faisabilit?? en emboutissage : optimisation du mat??riau par surface de??r??ponseFeasibility in deep drawing: optimization of material properties using response surface, M??canique & Industries, vol.3, issue.2, pp.93-98, 2002.
DOI : 10.1016/S1296-2139(02)01144-2

F. Dimier, B. Vergnes, and M. Vincent, Le glissement à la paroi d'un mélange de caoutchouc naturel, pp.35-39, 2002.

[. Diot, A. Gavrus, D. Guines, and E. Ragneau, Identification du comportement d'un acier en compression : du quasi-statique au dynamiqueIdentification of a steel compression behaviour: from quasi static approach to dynamic one, M??canique & Industries, vol.4, issue.5, pp.519-524, 2003.
DOI : 10.1016/j.mecind.2003.07.007

T. [. Tien and . Do, Optimisation de forme en forgeage 3D, Thèse de Doctorat, 2006.

A. [. Dreo, P. Petrowski, E. Siarry, and . Taillard, Métaheuristique pour l'optimisation difficile, Hermès, 2003.

X. Duan, X. Velay, and T. Sheppard, Application of finite element method in the hot extrusion of aluminium alloys, Materials Science and Engineering: A, vol.369, issue.1-2, pp.66-75, 2004.
DOI : 10.1016/j.msea.2003.10.275

H. J. Ettinger, J. Sienz, J. F. Pittman, A. Polynkin, and G. E. Fasshauer, Parameterization and optimisation strategies for the automated design of u PVC profile extrusion diesToward approximate moving least squares approximation with irregularly spaced centers, Structural and Multidisciplinary Optimization Computer Methods In Applied Mechanics And Engineering, vol.28, pp.180-1941231, 2004.

R. Fletcher, Pratical methods of optimization, 1987.

R. Fletcher, Pratical methods of optimization, 2006.

T. [. Formeent, A. Do, M. Habbal, and . Bouzaiane, Optimization of forging sequences using gradient, non-gradient and hybrid algorithms, proceedings of APOMAT, pp.218-225, 2005.

J. Forsberg and L. Nilsson, Evaluation of response surface methodologies used in crashworthiness optimization, International Journal of Impact Engineering, vol.32, issue.5, pp.759-777, 2006.
DOI : 10.1016/j.ijimpeng.2005.01.007

A. Fortin, Analyse numerique pour ingenieurs, 1995.

P. [. Fradette, F. Tanguy, P. Thibault, D. Sheehy, P. Blouin et al., Optimal Design in Profile Extrusion Calibration, Journal of Polymer Engineering, vol.79, issue.4, pp.295-322, 1995.
DOI : 10.1002/aic.690330307

A. Gavrus, E. Massoni, and J. L. Chenot, An inverse analysis using a finite element model for identification of rheological parameters, Journal of Materials Processing Technology, vol.60, issue.1-4, pp.447-454, 1996.
DOI : 10.1016/0924-0136(96)02369-2

H. [. Geiger and . Kuhnle, Analytische Berechnung einfacher scherstr???mungen aufgrund eines flie???gesetzes vom carreauschen typ, Rheologica Acta, vol.145, issue.4, pp.355-367, 1984.
DOI : 10.1007/BF01329188

O. Ghouati and J. C. Gelin, Identification of material parameters directly from metal forming processes, Journal of Materials Processing Technology, vol.80, issue.81, pp.560-564, 1998.
DOI : 10.1016/S0924-0136(98)00159-9

. [. Gifford, The Use of Three-Dimensional Computational Fluid Dynamics in the Design of Extrusion Dies, Journal of Reinforced Plastics and Composites, vol.16, issue.7, pp.661-674, 1997.
DOI : 10.1063/1.863750

. [. Gifford, A three-dimensional analysis of the effect of die body deflection in the design of extrusion dies, SPE Annual Technical Conference, p.290, 1998.
DOI : 10.1002/pen.10343

. [. Giffordgif01a-]-w and . Gifford, A three-dimensional analysis of coextrusion in a single manifold flat dieThe effect of wall slip on the performance of flat extrusion dies, SPE Annual Technical Conference SPE Annual Technical Conference, p.130, 2000.

]. W. Gif01b and . Gifford, The effect of wall slip on the performance of flat extrusion dies, Polymer Engineering and Science, vol.41, pp.1886-1892, 2001.

W. A. Giffordgir00 and ]. Giraud, The use of three-dimensional computation fluid dynamic in the design of profile diesPresentation of Pipe Products, SPE Annual Technical Conference International Technical Symposium, p.778, 2000.

. [. Goupy, Plans d'expériences pour surfaces de réponse, Industries Techniques, 1999.

J. Goupy, Introduction aux plans d'expériences, Industries Techniques, 2001.

C. [. Goutille, J. Raveyre, and . Guillet, Conditions d'extrusion et défaut de rupture d'extrudat, pp.40-50, 2002.

. [. Gruau, Génération de métriques pour adaptation anisotrope de maillages, applications à la mise en forme des matériaux, Thèse de doctorat, 2004.

T. [. Gruau and . Coupez, 3D tetrahedral, unstructured and anisotropic mesh generation with adaptation to natural and multidomain metric, SPE Annual Technical Conference, pp.4951-4976595, 1999.
DOI : 10.1016/j.cma.2004.11.020

URL : https://hal.archives-ouvertes.fr/hal-00517639

. [. Gupta, Effect of elongational viscosity on die design for plastic extrusion, SPE Annual Technical Conference, pp.290-294, 2003.

L. [. Hervet and . Léger, Flow with slip at the wall: from simple to complex fluids, Comptes Rendus Physique, vol.4, issue.2, pp.241-249, 2003.
DOI : 10.1016/S1631-0705(03)00047-1

P. [. Hurez, D. Tanguy, and . Blouin, A new design procedure for profile extrusion dies, Polymer Engineering & Science, vol.4, issue.5, pp.626-635, 1996.
DOI : 10.1002/pen.10450

P. [. Huneault, P. J. Lafleur, . H. Carreauhsi03-]-s, J. L. Hsiang, and . Kuo, Evaluation of the FAN Technique for Profile Die Design, Journal of Materials Processing Technology, pp.50-57, 1996.
DOI : 10.3139/217.960050

P. [. Huneault, P. J. Lafleur, and . Carreau, Evaluation of the FAN Technique for Profile Die Design, International Polymer Processing, vol.11, issue.1, pp.50-57, 1996.
DOI : 10.3139/217.960050

A. Idris, A. F. Ismail, M. Y. Noordin, and S. J. Shilton, Optimization of cellulose acetate hollow fiber reverse osmosis membrane production using Taguchi method, Journal of Membrane Science, vol.205, issue.1-2, pp.223-237, 2002.
DOI : 10.1016/S0376-7388(02)00116-3

S. [. Joun and . Hwang, Optimal process design in steady-state metal forming by finite element method-II. Application to die profile design in extrusion". International journal of machine tools & manufacture, pp.63-70, 1993.

I. Kaymaz, Application of kriging method to structural reliability problems, Structural Safety, vol.27, issue.2, pp.133-151, 2005.
DOI : 10.1016/j.strusafe.2004.09.001

G. Keltz, Contribution à l'optimisation des procédés d'emboutissage de tôles en construction automobile, Thèse de Doctorat, 2004.

A. [. Khayat, L. P. Derdouri, and . Hebert, A three-dimensional boundary-element approach to gas-assisted injection molding, Journal of Non-Newtonian Fluid Mechanics, vol.57, issue.2-3, pp.253-270, 1995.
DOI : 10.1016/0377-0257(94)01334-E

D. [. Ko, S. H. Kim, B. B. Lee, and . Hwang, The influence of die geometry on the radial extrusion processes, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.109-114, 2001.
DOI : 10.1016/S0924-0136(01)00704-X

E. [. Kusiak and . Thompson, Optimization techniques for extrusion die shape design, Balkema Rotterdam, issue.89, pp.569-574, 1989.

C. Labergere, Contributions à la modélisation, à l'optimisation et au contrôle des procèdes d'hydroformage de tubes et flans, Thèse de doctorat, 2003.

]. N. Leb04a, S. Lebaal, F. Puissant, and . Schmidt, Déterminations des paramètres d'une loi de viscosité pseudoplastique à l'aide de mesures sur une filière d'extrusion, 9ème Journée de la Matière Condensée, 2004.

]. N. Leb04b, F. Lebaal, S. Schmidt, and . Puissant, Méthode de l'approximation diffuse appliquée à l'optimisation de la tête d'extrusion, Séminaire Optimisation, 2004.

]. N. Leb05a, S. Lebaal, F. Puissant, and . Schmidt, Rheological parameters identification using in situ experimental data of a flat die extrusion, Journal of Materials Processing Technology, pp.164-165, 2005.

]. N. Leb05b, F. Lebaal, S. Schmidt, and . Puissant, Identification des paramètres rhéologiques à l'aide d'une méthode d'optimisation appliquée à l'extrusion 3D, 17ème Congrès Français de Mécanique, 2005.

]. N. Leb05c, S. Lebaal, F. Puissant, and . Schmidt, Rheological parameters identification using in-situ experimental data of a flat die extrusion, 8th International Conference on advances in materials and processing technologies, 2005.

F. [. Lebaal, S. Schmidt, and . Puissant, Optimization of 3D die extrusion using response surface method, Proceedings of the 9th international ESAFORM conference, pp.703-706, 2006.

D. [. Lee, B. M. Ko, and . Kim, Optimal die profile design for uniform microstructure in hot extruded product, International Journal of Machine Tools and Manufacture, vol.40, issue.10, pp.1457-1478, 2000.
DOI : 10.1016/S0890-6955(00)00008-0

P. [. Lee and . Hajela, Application of classifier systems in improving response surface based approximations for design optimization, Computers & Structures, vol.79, issue.3, pp.333-344, 2001.
DOI : 10.1016/S0045-7949(00)00132-2

D. [. Lee and . Yang, Shape optimization of flow guides in three-dimensional extrusion processes by an approximation scheme based on state variable linearization, International Journal for Numerical Methods in Engineering, vol.64, issue.11, pp.1691-1716, 2003.
DOI : 10.1080/02331938308842847

]. H. Li04a, L. H. Li, H. M. Qi, L. J. Han, and . Guo, Neural network modeling and optimization of semi-solid extrusion for aluminum matrix composites, Journal of Materials Processing Technology, vol.151, pp.126-132, 2004.

]. H. Li-04b, Q. X. Li, K. Y. Wang, and . Lam, Development of a novel meshless Local Kriging (LoKriging) method for structural dynamic analysisVibration analysis of symmetrically laminated plates based on FSDT using the moving least squares differential quadrature method, Computer methods in applied mechanic and engineering, pp.2599-2619, 2003.

Y. [. Liew, J. N. Huang, and . Reddy, Analysis of general shaped thin plates by the moving least-squares differential quadrature method, Finite Elements in Analysis and Design, vol.40, issue.11, pp.1453-1474, 2004.
DOI : 10.1016/j.finel.2003.10.002

V. [. Lightfoot and . Gallo, Optimization of extrusion blow molding ovalized tooling, SPE Annual Technical Conference, p.3394, 2003.

E. Mathey, Optimisation numérique du refroidissement des moules d'injection de thermoplastiques basée sur la simulation des transferts thermiques par la méthode des éléments des frontières, Thèse de doctorat, 2004.

S. [. Michaeli, . T. Kaul, and . Wolff, Computer aided optimisation of extrusion dies, Journal of Polymer Engineering, vol.21, pp.225-237, 2001.

S. [. Michaeli, Approch of automatic extrusion die optimisation, Journal of Polymer Engineering, vol.24, pp.123-136, 2004.

B. [. Miheli? and . ?tok, Tool design optimization in extrusion processes, Computers & Structures, vol.68, issue.1-3, pp.283-293, 1998.
DOI : 10.1016/S0045-7949(98)00019-4

S. [. Milenin, G. Berski, H. Banaszek, and . Dyja, Theoretical analysis and optimisation of parameters in extrusion process of explosive cladded bimetallic rods, Journal of Materials Processing Technology, vol.157, issue.158, pp.157-158208, 2004.
DOI : 10.1016/j.jmatprotec.2004.09.031

]. M. Min83a and . Minoux, Programmation mathématique : théorie et algorithmes, 1983.

]. M. Min83b and . Minoux, Programmation mathématique : théorie et algorithmes, 1983.

F. H. Mohammed, R. B. Russel, and B. J. Sanjay, Metamodeling: Radial basis functions, versus polynomials, European Journal of Operational Research, vol.138, pp.142-154, 2002.

A. [. Mohammadi, Z. Pak, M. Nourian, and . Taherkhani, Experimental design in mullite microfilter preparationDesign and analysis of experiments, Desalination, pp.184-57, 2005.

. [. Mourniac-[-myr02-]-r, D. C. Myers, and . Montgomery, Le problème du glissement à la paroi dans les écoulements de mélanges d'élastomèresResponse surface methodology, Process and product optimization using designed experiments, 1991.

. [. Naceur, Optimisation de forme de structures minces en présence de non linéarités géométriques et matérielles, Thèse de doctorat, 1998.

P. [. Naceur, C. Breitkopf, P. Knopf-lenoir, and . Villon, Méthode de surface de réponse pour l'optimisation de forme des surface additionnelles de pièces embouties, Sixième colloque national en calcul des structures, pp.215-222, 2003.

S. [. Naceur, C. Elechi, J. L. Knopf-lenoir, and . Batoz, Response Surface Methodology for the Design of Sheet Metal Forming Parameters to Control Springback Effects using the Inverse Approach, AIP Conference Proceedings, pp.1991-1996, 2004.
DOI : 10.1063/1.1766826

J. M. Nóbrega, O. S. Carneiro, F. T. Pinho, and P. J. Oliveira, Flow balancing of profile extrusion dies, SPE Annual Technical Conference, pp.31-35, 2001.

J. M. Nóbrega, O. S. Carneiro, F. T. Pinho, and P. J. Oliveira, Flow Balancing in Extrusion Dies for Thermoplastic Profiles, International Polymer Processing, vol.19, issue.3, pp.225-235, 2004.
DOI : 10.3139/217.1825

J. M. Nóbrega, O. S. Carneiro, P. J. Oliveira, and F. T. Pinho, Sensitivity of flow distribution and flow patterns in profile extrusion dies, SPE Annual Technical Conference, pp.310-314, 2003.

G. [. Nayroles, P. Touzot, and . Villon, Generalizing the finite element method: Diffuse approximation and diffuse elements, Computational Mechanics, vol.313, issue.5, pp.307-318, 1992.
DOI : 10.1007/BF00364252

. [. Puissant, Etude numérique et expérimentale de la coextrusion des polymères dans une filière plate, Thèse de Doctorat, 1992.

Y. [. Puissant, B. Demay, J. F. Vergnes, and . Agassant, Two-dimensional multilayer coextrusion flow in a flat coat-hanger die. Part I: Modeling, Polymer Engineering and Science, vol.24, issue.3, pp.201-208, 1994.
DOI : 10.1002/pen.760340305

P. [. Puissant and . Bonvin, Lignes d'extrusion en câblerie. Câbles. Etapes de fabrication, Techniques de l'ingénieur, traité Plastiques et Composites, AM, p.641, 2006.

E. Pichelin and T. Coupez, Finite element solution of the 3D mold filling problem for viscous incompressible fluid, Computer Methods in Applied Mechanics and Engineering, vol.163, issue.1-4, pp.359-371, 1998.
DOI : 10.1016/S0045-7825(98)00024-3

URL : https://hal.archives-ouvertes.fr/hal-00617037

T. [. Pichelin and . Coupez, A Taylor discontinuous Galerkin method for the thermal solution in 3D mold filling, Computer Methods in Applied Mechanics and Engineering, vol.178, issue.1-2, pp.153-169, 1999.
DOI : 10.1016/S0045-7825(99)00011-0

URL : https://hal.archives-ouvertes.fr/hal-00542132

P. [. Park, H. Oh, and . Lim, The application of the CFD and Kriging method to an optimization of heat sink, International Journal of Heat and Mass Transfer, vol.49, issue.19-20, pp.3439-3447, 2006.
DOI : 10.1016/j.ijheatmasstransfer.2006.03.009

S. V. Ramesh and . Teegavarapu, Use of universal function approximation in variance-dependent surface interpolation method: An application in hydrology, Journal of Hydrology, vol.332, pp.16-29, 2007.

. [. Rao, Design formulas for plastics engineers, 1991.

E. [. Reddy, L. G. Schaub, H. L. Reifschneider, and . Thomas, Design and optimisation of three dimensional extrusion dies using adaptative finite element method, SPE Annual Technical Conference, pp.622-626, 1999.

. [. Reifschneider, Automated sheet die design, In: SPE Annual Technical Conference, 2002.

]. L. Rei04a, M. Reifschneider, S. R. Kostic, and . Vaddiraju, Computational design of Uprofile die calibrator, SPE Annual Technical Conference, pp.246-250, 2004.

]. J. [-rei04b, M. Á. Reina, C. G. Pérez, and . Gayab, Parametric classification based on technico-economic approaches to optimize the design and manufacturing of hot forged parts, Journal of Materials Processing Technology, vol.150, pp.223-233, 2004.

. [. Rinaldi-mareel, Amélioration des propriétés optiques des fibres de verre utilisées en télécommunication, Thèse de doctorat, 2004.

L. [. Robert, C. Ruiz-alzola, C. Alberola-lopez, and . Westin, Instabilité oscillante de polyéthylènes linéaires: observations et interprétationsKriging filters for multidimensional signal processingA hybrid genetic algorithm for reinforced concrete flat slab buildings, Signal Processing Computers and Structures, vol.85, issue.83, pp.413-439, 2001.

]. M. Sah05b, A. F. Sahaba, V. V. Ashourb, and . Toropovc, Cost optimisation of reinforced concrete flat slab buildings, SAI82] P. Saillard, "Les phénomènes thermiques dans les outillages d'extrusion de matières plastiques Thèse de doctorat, pp.313-322, 1982.
DOI : 10.1016/j.engstruct.2004.10.002

F. [. Sakata, M. Ashida, and . Zako, Structural optimization using Kriging approximation, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.7-8, pp.923-939, 2003.
DOI : 10.1016/S0045-7825(02)00617-5

F. [. Sakata, M. Ashida, and . Zako, An efficient algorithm for Kriging approximation and optimization with large-scale sampling data, Computer Methods in Applied Mechanics and Engineering, vol.193, issue.3-5, pp.385-404, 2004.
DOI : 10.1016/j.cma.2003.10.006

D. Schläfli, Filière rhéométriques théorie/filière plate, 1997.

D. Schläfli, Analysis of Polymer Flow through Coathanger Melt Distributors, International Polymer Processing, vol.10, issue.3, p.195, 1995.
DOI : 10.3139/217.950195

. [. Schläfli, Design and Analysis of Spiral Mandrel Dies for Wire Coating Application, In: SPE Annual Technical Conference, 1998.
DOI : 10.3139/217.950195

. [. Schläfli, Plastics Extrusion-A short Overview, International Technical Symposium, 2000.

P. Schimmerling, J. C. Sisssion, and A. Zaïdi, Pratique des plans d'expériences", technique & documentation, 1998.

J. Sienz, S. J. Bates, J. F. Pittman, and L. Silva, Flow restrictor design for extrusion slit dies for a range of materials: Simulation and comparison of optimization techniques, Thèse de doctorat, pp.430-453, 2004.
DOI : 10.1016/j.finel.2005.06.008

L. Silva, M. Barré, H. Digonnet, C. Gruau, A. Rodriguez-villa et al., Avancement et perspectives dans la simulation numérique tridimensionnelle de l'injection de polymères, Congrès français de mécanique, 2003.

D. Silagy, Extrusion de film à plat : cast film, Techniques de l'Ingénieur, traité plastique et composites, AM, p.707, 2005.

]. D. Smi03a and . Smith, Design sensitivity analysis and optimization for polymer sheet extrusion and mold filing processes, International Journal for Numerical Methods In Engineering, vol.57, pp.1381-1411, 2003.

]. D. Smi03b and . Smith, An optimisation-based approach to compute sheeting die designs for multiple operating conditions, SPE Annual Technical Conference, pp.315-319, 2003.

]. D. Smi98a, D. A. Smith, C. L. Tortorelliav, and . Tucker, Optimal design for polymer extrusion. Part I: Sensitivity analysis for nonlinear steady-state systems, Computer Methods in Applied Mechanics and Engineering, vol.167, pp.283-302, 1998.

]. D. Smi98b, D. A. Smith, C. L. Tortorelliav, and . Tucker, Optimal design for polymer extrusion. Part II: Sensitivity analysis for weakly-coupled nonlinear steadystate systems, Computer Methods in Applied Mechanics and Engineering, vol.167, pp.303-323, 1998.

W. [. Steeman, H. Zoetelief, and . Cao, Rheological properties of optical fiber coating resins at high shear rates, Intern Wire & Cable Symposium, pp.532-535, 2004.

Y. Sun and M. Gupta, Effect of Elongational Viscosity on the Flow in a Flat Die, International Polymer Processing, vol.18, issue.4, pp.356-361, 2003.
DOI : 10.3139/217.1781

Y. Sun and M. Gupta, An analysis of the effect of elongational viscosity on the flowin a flat dieOptimization of a flat die geometry, SPE Annual Technical Conference SPE Annual Technical Conference, pp.5403307-3311, 2003.

. [. Teegavarapu, Use of universal function approximation in variance-dependent surface interpolation method: An application in hydrology, Journal of Hydrology, vol.332, issue.1-2, pp.16-29, 2007.
DOI : 10.1016/j.jhydrol.2006.06.017

F. Trochu and P. Terriault, Nonlinear modelling of hysteretic material laws by dual kriging and application, Computer Methods in Applied Mechanics and Engineering, vol.151, issue.3-4, pp.545-558, 1998.
DOI : 10.1016/S0045-7825(97)00165-5

. [. Ulysse, Extrusion die design for flow balance using FE and optimization methodsOptimal extrusion die design to achieve flow balance, International Journal of Mechanical Sciences International journal of machine tools and manufacture, vol.44, issue.39, pp.319-341, 1999.

M. [. Vaddiraju, L. Kostic, A. Reifschneider, V. Pla-dalmau, A. Rykalin et al., Extrusion simulation and experimental validation to optimize precision die design, SPE Annual Technical Conference, pp.76-80, 2004.

. [. Vergnes, Modélisation de l'écoulement d'un polymère dans une filière de cablerie Thèse de Doctorat, 1979.

J. [. Vergnes and . Agassant, Modélisation des écoulements dans les filières d'extrusion, Techniques de l'Ingénieur, traité Plastiques et Composites, A3 655, pp.1-19, 1995.

D. Vieilledent, « Optimisation des outils en forgeage à chaud par simulation éléments finis et méthode inverse Application à des problèmes industriels, Thèse de Doctorat, Ecole Nationale Supérieur des Mines de Paris, 1999.

P. Villon, Contribution à l'optimisation, Thèse d'état, 1991.

N. A. Vonk, M. Nielen, and J. P. Kleijnen, Sensitivity analysis by experimental design and metamodelling: Case study on simulation in national animal disease control, European Journal of Operational Research, vol.146, issue.3, pp.433-443, 2003.
DOI : 10.1016/S0377-2217(02)00257-6

. [. Wang, The flow distribution of molten polymers in slit dies and coathanger dies through three-dimensional finite element analysis, Polymer Engineering and Science, vol.60, issue.3, pp.204-212, 1991.
DOI : 10.5254/1.3536134

H. H. Winter and H. G. Fritz, Design of dies for the extrusion of sheets and annular parisons: The distribution problem, Polymer Engineering and Science, vol.24, issue.8, pp.543-553, 1986.
DOI : 10.1016/S0065-2717(08)70224-7

H. [. Wu, D. Li, and . Wang, Vibration analysis of generally laminated composite platesby the moving least squares differential quadrature method, Composite Structures, vol.68, pp.319-330, 2005.

S. [. Xiaorong, L. Changyu, W. Chuntai, and . Lixia, Optimal design for polymer sheeting dies, Chinese journal of computational mechanics, pp.253-256, 2004.

J. Yang, B. Jeon, and S. Oh, Design sensitivity analysis and optimization of the hydroforming process, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.666-672, 2001.
DOI : 10.1016/S0924-0136(01)00670-7

F. Yoshida, M. Urabe, and V. V. Toropov, Identification of material parameters in constitutive model for sheet metals from cyclic bending tests, International Journal of Mechanical Sciences, vol.40, issue.2-3, pp.237-249, 1998.
DOI : 10.1016/S0020-7403(97)00052-0

T. [. Yu and . Liu, A simple numerical approach for the optimal design of an extrusion die, Journal of Polymer Research, vol.22, issue.b, pp.1-7, 1998.
DOI : 10.1007/s10965-006-0033-z

X. [. Yu, T. R. Chen, F. Hung, and . Thibault, Optimization of extrusion blow molding processes using soft computing and Taguchi???s method, Journal of Intelligent Manufacturing, vol.15, issue.5, pp.625-634, 2004.
DOI : 10.1023/B:JIMS.0000037712.33636.41

L. Zerpa, N. Queipo, S. Pintos, and J. L. Salager, An optimization methodology of alkaline???surfactant???polymer flooding processes using field scale numerical simulation and multiple surrogates, Journal of Petroleum Science and Engineering, vol.47, issue.3-4, pp.197-208, 2005.
DOI : 10.1016/j.petrol.2005.03.002