F. Addiego, A. Dahoun, C. G. Sell, and J. Hiver, Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene, Polymer, vol.47, issue.12, pp.4387-4399, 2006.
DOI : 10.1016/j.polymer.2006.03.093

M. Aboulfaraj, C. G. Sell, B. Ulrich, and A. Dahoun, In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope, Polymer, vol.36, issue.4, pp.731-742, 1995.
DOI : 10.1016/0032-3861(95)93102-R

E. M. Arruda and M. C. Boyce, A three-dimensional constitutive model for the large stretch behaviour of rubber elastic materials, J. Mec. Phys. Solids, pp.41-389, 1993.

Z. Bartczak, A. Galeski, A. S. Argon, and R. E. Cohen, On the plastic deformation of the amorphous component in semicrystalline polymers, Polymer, vol.37, issue.11, pp.2113-2123, 1996.
DOI : 10.1016/0032-3861(96)85856-3

Z. Bartczak and E. Lezak, Evolution of lamellar orientation and crystalline texture of various polyethylenes and ethylene-based copolymers in plane-strain compression, Polymer, vol.46, issue.16, pp.6050-6063, 2005.
DOI : 10.1016/j.polymer.2005.04.092

Z. Bartczak and M. Kozanecki, Influence of molecular parameters on high-strain deformation of polyethylene in the plane-strain compression. Part I. Stress???strain behavior, Polymer, vol.46, issue.19, pp.8210-8221, 2005.
DOI : 10.1016/j.polymer.2005.06.100

S. R. Bonder and Y. Partom, Constitutive equations for elasticviscoplastic strain?hardening materials, J. Appl. Mech, vol.42, pp.385-389, 1975.

N. Bonora, D. Gentele, A. Pirondi, and G. Newaz, Ductile damage evolution under triaxial stress : theory and expermints. international journal of plasticity, pp.981-1007, 2005.
DOI : 10.1016/j.ijplas.2004.06.003

N. W. Brooks, R. A. Duckett, and I. M. Ward, Effects of crystallinity and stress state on the yield strain of polyethylene, Polymer, vol.40, issue.26, pp.7367-7372, 1999.
DOI : 10.1016/S0032-3861(99)00054-3

N. Brown and I. M. Ward, The influence of morphology and molecular weight on ductile-brittle transitions in linear polyethylene, Journal of Materials Science, vol.17, issue.5, pp.1405-1420, 1983.
DOI : 10.1007/BF01111960

P. B. Bowden and R. J. Young, Deformation mechanisms in crystalline polymers, Journal of Materials Science, vol.30, issue.9, pp.2034-2051, 1974.
DOI : 10.1098/rspa.1972.0112

M. F. Butler and A. M. Donald, Deformation of spherulitic polyethylene thin film, Journal of Materials Science, vol.32, issue.14, pp.3675-3685, 1997.
DOI : 10.1023/A:1018642732686

M. F. Butler, A. M. Donald, and A. J. Ryan, Time resolved simultaneous small- and wide-angle X-ray scattering during polyethylene deformation???II. Cold drawing of linear polyethylene, Polymer, vol.39, issue.1, pp.39-52, 1998.
DOI : 10.1016/S0032-3861(97)00226-7

C. B. Bucknall and D. Clayton, Rubber-toughening of plastics, Journal of Materials Science, vol.302, issue.22, pp.202-210, 1972.
DOI : 10.1098/rspa.1968.0029

C. B. Bucknall, D. Clayton, and W. E. Keast, Rubber-toughening of plastics, Journal of Materials Science, vol.7, issue.12, pp.1443-1453, 1972.
DOI : 10.1007/BF00574936

L. Cangemi and Y. Meimon, Une approche m???so-macro continue pour la mod???lisation du comportement des polym???res semi-cristallins ??? usage structuralA mesoscopic continuum modelling for the behaviour of semicrystalline polymers for structural applications, M???canique & Industries, vol.3, issue.6, pp.557-570, 2002.
DOI : 10.1016/S1296-2139(02)01201-0

L. Cangemi, S. Elkoun, C. G. Sell, and Y. Meimon, Volume strain changes of plasticized poly(vinylidene fluoride) during tensile and creep tests, Journal of Applied Polymer Science, vol.34, issue.3, pp.1784-1791, 2004.
DOI : 10.1002/app.13313

S. Castagnet, J. Gacougnolle, and P. Dang, Correlation between macroscopical viscoelastic behaviour and micromechanisms in strained ?? polyvinylidene fluoride (PVDF), Materials Science and Engineering: A, vol.276, issue.1-2, pp.152-159, 2000.
DOI : 10.1016/S0921-5093(99)00320-2

S. Castagnet, S. Girault, J. L. Gacougnolle, and P. Dang, Cavitation in strained polyvinylidene fluoride: mechanical and X-ray experimental studies, Polymer, vol.41, issue.20, pp.7523-7530, 2000.
DOI : 10.1016/S0032-3861(00)00077-X

S. Castagnet and Y. Deburck, Relative influence of microstructure and macroscopic triaxiality on cavitation damage in a semi-crystalline polymer, Materials Science and Engineering: A, vol.448, issue.1-2, pp.56-66, 2007.
DOI : 10.1016/j.msea.2006.11.100

]. B. Chen, Y. C. Huang, P. D. Liu, S. R. Wu, and . Macewen, A dilatational plasticity theory for viscoplastic materials, Mechanics of Materials, vol.36, issue.8, pp.679-689, 2004.
DOI : 10.1016/j.mechmat.2002.07.001

A. Cohen, A Pad??? approximant to the inverse Langevin function, Rheologica Acta, vol.2, issue.3, pp.270-273, 1991.
DOI : 10.1007/BF00366640

D. M. Colucci, P. A. O-'connell, and G. B. Mckenna, Stress relaxation experiments in polycarbonate: A comparison of volume changes for two commercial grades, Polymer Engineering & Science, vol.279, issue.9, pp.1469-1474, 1997.
DOI : 10.1002/pen.11794

B. Crist and C. Metaxas, Neck propagation in polyethylene, Journal of Polymer Science Part B: Polymer Physics, vol.22, issue.11, pp.2081-2091, 2004.
DOI : 10.1016/0001-6160(85)90099-9

A. Dahoun, Comportement plastique et textures de déformation des polymères semi-cristallins en traction uniaxiale et en cisaillement simple, Thèse, INPL, 1992.

M. Delin, R. W. Rychwalski, J. Kubat, M. J. Kubat, H. Bertilsson et al., Volume changes during flow of Solids Polymers. J. of non-crystalline solids 172-174, pp.779-785, 1994.

M. Delin, R. W. Rychwalsi, M. J. Kubât, and J. Kubât, Volume changes during stress relaxation in polyethylene, Rheologica Acta, vol.23, issue.17, pp.182-195, 1995.
DOI : 10.1007/BF00398438

J. A. Van, D. , D. M. Parks, M. C. Boyce, W. A. Brekelmans et al., Micromechanical modeling of intraspherulitic deformation of semicrystalline polymers. Polym, pp.6089-6101, 2003.

]. T. De and . Donder, Thermodynamic theory of affinity : A Book of principle, 1936.

R. S. Duran and G. B. Mckenna, A torsional dilatometer for volume change measurements on deformed glasses: Instrument description and measurements on equilibrated glasses, Journal of Rheology, vol.34, issue.6, pp.813-839, 1990.
DOI : 10.1122/1.550150

S. Elkoun, C. G. Sell, L. Cangemi, and Y. Meimon, Characterization of volume strain of poly(vinylidene fluoride) under creep test, Journal of Polymer Science Part B: Polymer Physics, vol.7, issue.16, pp.1754-1759, 2002.
DOI : 10.1007/BF00574936

E. W. Fischer, R. Lorenz, and . Kolloid-z, ??ber Fehlordnungen in Poly??thylen-Einkristallen, Kolloid-Zeitschrift & Zeitschrift f??r Polymere, vol.74, issue.2, p.97, 1963.
DOI : 10.1007/BF01499499

C. Fond and C. G. Sell, Localisation des déformations et mécaniques d'endommagements dans les polymères multiphasés, Mécanique & industries, vol.3, pp.431-438, 2002.

]. P. Fra-94, J. M. Francois, B. Gloaguen, J. M. Hue, and . Lefebvre, Volume strain measurements by opticl extensometry : Application to the tensile behaviour of RT ? PMMA, Journal de physiques III, vol.4, pp.321-329, 1994.

G. J. Frank and R. A. Brockman, A viscoelastic???viscoplastic constitutive model for glassy polymers, International Journal of Solids and Structures, vol.38, issue.30-31, pp.5149-5164, 2001.
DOI : 10.1016/S0020-7683(00)00339-5

V. Gaucher-miri, C. Depecker, and R. Seguela, Reversible strain-induced order in the amorphous phase of a low-density ethylene/butene copolymer, Journal of Polymer Science Part B: Polymer Physics, vol.35, issue.13, pp.2151-2159, 1997.
DOI : 10.1002/(SICI)1099-0488(19970930)35:13<2151::AID-POLB15>3.0.CO;2-3

J. M. Gloaguen and J. M. Lefebvre, Plastic deformation behaviour of thermoplastic/clay nanocomposites, Polymer, vol.42, issue.13, pp.5841-5847, 2001.
DOI : 10.1016/S0032-3861(00)00901-0

C. G. Sell, J. M. Hiver, A. Dahoun, and A. Souahi, Video-controlled tensile testing of polymers and metals beyond the necking point, Journal of Materials Science, vol.264, issue.18, pp.5031-5039, 1992.
DOI : 10.1007/BF01105270

C. G. Sell and A. Dahoun, Evolution of microstructure in semi-crystalline polymers under large plastic deformation, Mater. Sci. and Eng, pp.175-183, 1994.

C. G. Sell and J. M. Haudin, Introduction à la mécanique des polymères, Chapitre loi de comportement mécanique des polymères solides. G'sell- Haudin, 1995.

C. G. Sell, J. M. Hiver, and A. Dahoun, Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking, International Journal of Solids and Structures, vol.39, issue.13-14, pp.3857-3872, 2002.
DOI : 10.1016/S0020-7683(02)00184-1

C. G. Sell, A. Dahoun, F. Addiego, and J. M. Hiver, Influence de la déformation volumique sur la dissipation plastique des polymères, Section Sud-Est), pp.16-17, 2003.

C. G. Sell, S. L. Bai, and J. M. Hiver, Polypropylene/polyamide 6/polyethylene???octene elastomer blends. Part 2: volume dilatation during plastic deformation under uniaxial tension, Polymer, vol.45, issue.17, pp.5785-5792, 2004.
DOI : 10.1016/j.polymer.2004.06.020

E. A. Guggenheim and R. H. Fowler, Statistical thermodynamics: a version of statistical mechanics for students of physics and chemistry, 1939.

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

H. B. Hamouda, Endommagement et fissuration en fluage de Polyéthylène extrudé: approche globale -approche locale, Thèse, ENSMP, 2000.

J. M. Haudin, Relation mise en forme ? morphologies cristallines dans les procédés, 1991.

D. Heikens, S. D. Sjoerdsma, and W. J. Coumans, A mathematical relation between volume strain, elongational strain and stress in homogeneous deformation, Journal of Materials Science, vol.7, issue.2, pp.429-432, 1981.
DOI : 10.1007/BF00738633

R. Hiss, S. Hobeika, C. G. Lynn, and . Strobi, Network Stretching, Slip Processes, and Fragmentation of Crystallites during Uniaxial Drawing of Polyethylene and Related Copolymers. A Comparative Study, Macromolecules, vol.32, issue.13, pp.4390-4403, 1999.
DOI : 10.1021/ma981776b

S. Hobeika, Y. Men, and G. Strobi, -vinyl acetate), Macromolecules, vol.33, issue.5, pp.1827-1833, 2000.
DOI : 10.1021/ma9910484

Z. Hongyi and G. L. Wilkes, Creep behaviour of high density polythethylene films having well-defined morpholoqies of stacked lamellae with and without an observable row-nucleated fibril structure A new yield function and a hydrostatic stress-controlled void nucleation model for porous solids with pressure-sensitive matrices, Int. J. solids structures, vol.39, pp.3597-3609, 1998.

K. Marabet, R. Rahouadj, and C. Cunat, An irreversible thermodynamic model for semicrystalline polymers submitted to multisequence loading at large strain, Polymer Engineering & Science, vol.17, issue.1, pp.42-51, 2004.
DOI : 10.1524/zpch.1988.157.Part_1.419

K. Marabet, R. Rahouadj, R. Arieby, C. J. Cunat-]-e, and . Kramer, Modélisation thermodynamique multiéchelle du comportement élasto(visco)plastique du PEHD en grandes déformations uniaxilaes séquencées. CFM Microscopic and molecular fundamentals of crazing, Crazing in polymers. Advances in Polymer Science, pp.1-56, 1983.

J. Kichenin, Comportement thermomécanique du polyéthylène : Application aux structures gazières, Thèse de doctorat, 1992.

A. J. Kovacs, Transition vitreuse dans les polym??res amorphes. Etude ph??nom??nologique, Fortschr. Hochpol. Forsch, vol.3, pp.394-507, 1963.
DOI : 10.1007/BFb0050366

]. L. Laiarinandrasana, R. Piques, and A. Robisson, Visco-hyperelastic model with internal state variable coupled with discontinuous damage concept under total Lagrangian formulation, International Journal of Plasticity, vol.19, issue.7, pp.977-1000, 2003.
DOI : 10.1016/S0749-6419(02)00089-X

]. J. Lem-99, R. Lemaitre, M. Desmorat, and . Sauzay, Anisotropic damage law of evolution, Eur. J. Mech. A/solids, vol.19, pp.187-208, 1999.

]. L. Lin and A. S. Argon, Structure and plastic deformation of polyethylene, Journal of Materials Science, vol.43, issue.7, pp.294-323, 1994.
DOI : 10.1098/rspa.1968.0029

]. D. Li, H. Garmestani, S. R. Kalidindi, and R. Alamo, Crystallographic texture evolution in high-density polyethylene during uniaxial tension, Polymer, vol.42, issue.11, pp.4903-4913, 2001.
DOI : 10.1016/S0032-3861(00)00829-6

L. Mandelkern, Crystallization Kinetics in High Polymers. II. Polymer???Diluent Mixtures, Journal of Applied Physics, vol.26, issue.4, pp.443-451, 1955.
DOI : 10.1063/1.1721296

A. Marquez-lucero, C. G. Sell, and K. W. Neale, Experimental investigation of neck propagation in polymers, Polymer, vol.30, issue.4, pp.636-642, 1989.
DOI : 10.1016/0032-3861(89)90147-X

F. A. Mcclintock, A Criterion for Ductile Fracture by the Growth of Holes, Journal of Applied Mechanics, vol.35, issue.2, pp.363-371, 1968.
DOI : 10.1115/1.3601204

H. G. Merriman and J. H. Caruthers, Nonlinear stress relaxation of a styrene???butadiene random copolymer, Journal of Polymer Science: Polymer Physics Edition, vol.19, issue.7, pp.1055-1071, 1981.
DOI : 10.1002/pol.1981.180190704

B. Monasse, S. Queyroy, and O. Lhost, Simulation par dynamique moléculaire de la déformation élastique et plastique de polyéthylène semi-cristallins, 2007.

S. I. Naqui, I. M. Robinson, and . Review, Tensile dilatometric studies of deformation in polymeric materials and their composites, Journal of Materials Science, vol.20, issue.6, pp.1421-1429, 1993.
DOI : 10.1179/095066061790425893

K. Nitta and M. Takayanagi, Tensile yield of isotactic polypropylene in terms of a lamellar-cluster model, Journal of Polymer Science Part B: Polymer Physics, vol.33, issue.8, pp.1037-1044, 2000.
DOI : 10.1023/A:1004351209140

L. Olasz and P. Gudmundson, Viscoelastic model of cross-linked polyethylene including effects of temperature and cristallinity. Mechanics of Time-Dependent Materials, pp.225-246, 2006.

L. Onsager, Reciprocal Relations in Irreversible Processes. I., Physical Review, vol.4, issue.4, pp.405-426, 1931.
DOI : 10.1002/andp.19103381612

E. M. Parsons, M. C. Boyce, D. M. Parks, and M. Weinberg, Three-dimensional large-strain tensile deformation of neat and calcium carbonate-filled high-density polyethylene, Polymer, vol.46, issue.7, pp.2257-2265, 2005.
DOI : 10.1016/j.polymer.2005.01.045

P. Marceron, Sur le rôle des potentiels généralisés en thermodynamique de la relaxation Application au comportement mécanique des polymères. De la loi locale au calcul de structure Plastic deformation of crystalline polymers: The role of cavitation and crystal plasticity, Thèse, INPL, 1999. [Paw 05, pp.9688-9697, 2005.

A. Pawlak, Cavitation during tensile deformation of high-density polyethylene, Polymer, vol.48, issue.5, pp.1397-1409, 2007.
DOI : 10.1016/j.polymer.2006.12.054

G. Perrin, Analytic stress-strain relationship for isotropic network model of rubber elasticity. Comptes rendus de l'Académie des Sciences, tome 328, série II b, pp.5-10, 2000.

J. Petermann and J. M. Schultz, Lamellar separation during the deformation of high-density polyethylene, Journal of Materials Science, vol.31, issue.1, pp.50-54, 1978.
DOI : 10.1007/BF00739272

A. Peterlin, Molecular model of drawing polyethylene and polypropylene, Journal of Materials Science, vol.5, issue.197, pp.490-508, 1971.
DOI : 10.1177/004051756303301005

J. M. Powers and R. M. Caddell, The macroscopic volume changes of selected polymers subjected to uniform tensile deformation, Polymer Engineering and Science, vol.5, issue.6, pp.432-436, 1972.
DOI : 10.1002/pen.760120608

B. Pukanszky, M. Van-es, F. H. Maurer, and G. Vörös, Micromechanical deformations in particulate filled thermoplastics: volume strain measurements, Journal of Materials Science, vol.9, issue.9, pp.2350-2358, 1994.
DOI : 10.1007/BF00363426

T. Quatravaux, S. Elkounn, C. G. Sell, L. Cangemi, and Y. Meimon, Experimental characterization of the volume strain of poly(vinylidene fluoride) in the region of homogeneous plastic deformation, Journal of Polymer Science Part B: Polymer Physics, vol.7, issue.22, pp.2516-2522, 2002.
DOI : 10.1007/BF00574936

Y. N. Rabotnov, Creep Problems in Structural Members, Journal of Applied Mechanics, vol.37, issue.1, 1969.
DOI : 10.1115/1.3408479

J. Rault, Les polymères solides -Amorphes, élastomères, semicristallins . 1 ère édition, Cépaduès, 2002.

]. R. Rice and D. M. Tracey, On ductile enlargement of voids in triaxial stress fields. Journal of mechanics and physics of solids, pp.210-217, 1969.

E. Roguet, S. Castagnet, and J. C. Grandidier, Mechanical features of the rubbery amorphous phase in tension and torsion in a semi-crystalline polymer, Mechanics of Materials, vol.39, issue.4, pp.380-391, 2007.
DOI : 10.1016/j.mechmat.2006.06.003

R. Seguela, V. Gaucher-miri, and S. Elkoun, Plastic deformation of polyethylene and ethylene copolymers: Part I Homogeneous crystal slip and molecular mobility, Journal of Materials Science, vol.33, issue.5, pp.1273-1279, 1998.
DOI : 10.1023/A:1004342113141

K. Schneider, S. Trabelsi, N. E. Zafeiropoulos, R. Davies, C. Riekel et al., The Study of Cavitation in HDPE Using Time Resolved Synchrotron X-ray Scattering During Tensile Deformation, Macromolecular Symposia, vol.233, issue.1, pp.241-248, 2006.
DOI : 10.1002/masy.200690062

L. C. Struick, Physical aging in amorphous polymers and other materials, Elseiver. Sci. Pub. Company, 1978.

R. Tie-bi, J. C. Dupre, and W. B. Lee, Thermomechanical parameters measurement by optical methods: Application on polymers Advances in Mechanical Behaviour, Plasticity and Damage, Tours Damage mechanics applied to elastic properties of polymers, Engineering Fracture Mechanics, vol.52, pp.929-934, 1994.

T. , W. H. Tai, and W. B. Lee, Modeling of damage behaviour of high impact polystyrene, Eng. Fract. Mech, vol.55, pp.583-591, 1996.

C. Y. Tang, C. P. Tsui, W. Shen, and L. H. Peng, Modelling of non-linear stress???strain behaviour of HIPS with craze damage in tensile loading???unloading process, Polymer Testing, vol.20, issue.1, pp.15-28, 2001.
DOI : 10.1016/S0142-9418(99)00073-2

V. Tvergaard and A. Needleman, Analysis of cup-cone fracture in a round tensile bar. Acta metal, pp.157-169, 1984.

V. Tvergaard and A. Needleman, Effects of nonlocal damage in porous plastic solids, International Journal of Solids and Structures, vol.32, issue.8-9, pp.1063-1077, 1995.
DOI : 10.1016/0020-7683(94)00185-Y

J. Varga and . Review, Supermolecular structure of isotactic polypropylene, Journal of Materials Science, vol.77, issue.159, pp.2557-2579, 1992.
DOI : 10.1002/apmc.1988.051580122

G. Vigier, J. Tatibouet, A. Benatmane, and R. Vassoille, Amorphous phase evolution during crystallization of poly(ethylene-terephthalate), Colloid & Polymer Science, vol.24, issue.8, pp.1182-1187, 1992.
DOI : 10.1007/BF02086052

]. P. Wu, E. Van, . Der, and . Giessen, On improved 3-D non-Gaussian network models for rubber elasticity, Mechanics Research Communications, vol.19, issue.5, pp.427-433, 1992.
DOI : 10.1016/0093-6413(92)90021-2

F. Zairi, M. N. Abdelaziz, K. Woznica, and J. M. Gloaguen, Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymer. European journal of mechanics A/solids, pp.169-182, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00137126

F. Zairi, M. N. Abdelaziz, K. Woznica, and J. M. Gloaguen, Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate, Journal of Engineering Materials and Technology, vol.24, issue.1, pp.29-35, 2007.
DOI : 10.1007/BF00738633

URL : https://hal.archives-ouvertes.fr/hal-00142646

C. Zhang and I. D. Moore, Nonlinear mechanical response of high density polyethylene. Part I: Experimental investigation and model evaluation, Polymer Engineering & Science, vol.27, issue.2, pp.404-413, 1997.
DOI : 10.1002/pen.11683