T. Abbasi and S. A. Abbasi, Dust explosions???Cases, causes, consequences, and control, Journal of Hazardous Materials, vol.140, issue.1-2, pp.7-44, 2007.
DOI : 10.1016/j.jhazmat.2006.11.007

V. Babrauskas, Ignition Handbook, 2006.

W. Bartknecht, Dust Explosions -Course, Prevention, Protection, 1989.

C. E. Brennen, Fundamentals of Multiphase Flows, 2005.
DOI : 10.1017/CBO9780511807169

M. E. Brown, Introduction to Thermal Analysis. the Netherlands, 2001.

M. E. Brown and M. Maciejewskib, Computational aspects of kinetic analysis, Thermochimica Acta, vol.355, issue.1-2, pp.125-143, 2000.
DOI : 10.1016/S0040-6031(00)00443-3

J. Broz and R. Lödel, Inflammabilité des noirs de carbone, 1999.

K. L. Cashdollar, Overview of dust explosibility characteristics, Journal of Loss Prevention in the Process Industries, vol.13, issue.3-5, pp.183-199, 2000.
DOI : 10.1016/S0950-4230(99)00039-X

C. Cesana and R. Siwek, MIKE 3-Minimum Ignition Energy, 2001.

C. Cesana and R. Siwek, Operating instructions 20L apparatus, 2001.

M. Daenen and R. D. Fouw, The Wondrous World of Carbon Nanotubes : a review of current carbon nanotube technologies, 2003.

A. E. Dahoe, Dust explosions : a Study of flame propagation, 2000.

A. E. Dahoe and R. S. Cant, On the decay of turbulence in the 20-litre explosion sphere. Flow. Flow turbulence and combustion 67, pp.159-184, 2001.

E. Degussa, What is carbon black?, 2006.

R. K. Eckhoff, Dust Explosions in the process industries, 2003.

R. H. Essenhigh and K. M. Misra, Ignition of coal particles: A review, Combustion and Flame, vol.77, issue.1, pp.3-30, 1989.
DOI : 10.1016/0010-2180(89)90101-6

E. Fitzer and K. Kochling, Recommended terminology for the description of carbon as a solid (IUPAC Recommendations 1995), Pure and Applied Chemistry, vol.67, issue.3, pp.473-506, 1995.
DOI : 10.1351/pac199567030473

J. H. Flynn, The ???Temperature Integral??? ??? Its use and abuse, Thermochimica Acta, vol.300, issue.1-2, pp.83-92, 1997.
DOI : 10.1016/S0040-6031(97)00046-4

A. P. Il-'in and E. M. Popenko, Combustion of Agglomerated Ultrafine Aluminum Powders in Air Combustion, Explosion, and Shock Waves, vol.38, issue.6, pp.665-669, 2002.

M. Kearns, Development and applications of ultrafine aluminium powders, Materials Science and Engineering: A, vol.375, issue.377, pp.120-126, 2004.
DOI : 10.1016/j.msea.2003.10.160

H. E. Kissinger, Reaction Kinetics in Differential Thermal Analysis, Analytical Chemistry, vol.29, issue.11, p.1702, 1957.
DOI : 10.1021/ac60131a045

J. Kris and J. Sestak, Methodology of studying reaction kinetics by thermal analysis, Thermochimica Acta, vol.110, pp.87-93, 1987.

A. Laurent, Sécurité des Procédés Chimiques -connaissances de base et méthodes d'analyse de risques, 2003.

J. H. Lee, Dust Explosion Parameters, their Measurement and Use, VDI BERICHTE, vol.701, pp.113-122, 1988.

O. Levenspiel, The Chemical reactor omnibook, 1989.

R. Mahadevan and D. Lee, Measurement of Condensed-Phase Reaction Kinetics in the Aerosol Phase Using Single Particle Mass Spectrometry, The Journal of Physical Chemistry A, vol.106, issue.46, pp.11083-11092, 2002.
DOI : 10.1021/jp025784c

D. Moppet, Particles Types and Environments to take into consideration. Delivrable D.1.1.1- Rapport Interne, 2005.

K. Park and D. Lee, Size-Resolved Kinetic Measurements of Aluminum Nanoparticle Oxidation with Single Particle Mass Spectrometry, The Journal of Physical Chemistry B, vol.109, issue.15, pp.7290-7299, 2005.
DOI : 10.1021/jp048041v

P. Périlhon, Réflexions sur les modèles de la science du danger. in Ecole d'été gestion scientifique du risque, 1999.

P. P. Périlhon, MOSAR présentation de la méthode, Méthode MADS-MOSAR-Manuel de mise en oeuvre, 2003.

X. Phung and J. Groza, Surface characterization of metal nanoparticles, Materials Science and Engineering: A, vol.359, issue.1-2, pp.261-268, 2003.
DOI : 10.1016/S0921-5093(03)00348-4

C. Proust, Formation-Inflammation-Combustion des atmosphères explosives (ATEX) et effets associés. Génie des procédés, p.278, 2004.

C. Proust and A. Accorsi, Measuring the violence of dust explosions with the 20 L sphere and with the standard ISO 1 m3 vessel : Systematic comparison and analysis of the discrepancies, Journal of Loss Prevention in the Process Industries, vol.20, pp.4-6, 2007.

M. M. Sandstrom and B. S. Jorgesen, Characterization of Ultra-fine Aluminum Nanoparticles. Association française de pyrotechnie, 2003.

N. Semenov, Chemical kinetics and chain reactions, 1935.

J. Sestak, Thermophysical Properties of Solid, Comprehensive Analytical Chemistry, 1984.

R. Siwek, 20-L Laborapparatur für die Bestimmung der ExplosionskenngrössenBrennbarer Stäube, 1977.

R. Siwek, Reliable determination of safety characteristics in the 20-Litre Apparatus, Proceedings of Conference on Flammable Dust Explosions, 2-4 novembre, 1988.

R. Siwek and C. Cesana, Ignition behavior of dusts : Meaning and interpretation Process Safety Progress, 1995.

T. Skjold, Selected Aspects of Turbulence and Combustion in 20-Litre Explosion Vessels- Development of experimental apparatus and experimental investigation, 2003.

S. Sklet, Safety barriers: Definition, classification, and performance, Journal of Loss Prevention in the Process Industries, vol.19, issue.5, pp.494-506, 2006.
DOI : 10.1016/j.jlp.2005.12.004

M. Traoré, Explosions de poussières et de mélanges hybrides Etude paramétriques et relation entre la cinétique de combustion et la violence d'explosion. Génie des Procédés, 2007.

M. A. Trunov and M. Schoenitz, Effect of polymorphic phase transformations in Al2O3 film on oxidation kinetics of aluminum powders, Combustion and Flame, vol.140, issue.4, pp.310-318, 2005.
DOI : 10.1016/j.combustflame.2004.10.010

G. Zhen and W. Leuckel, Effects of ignitors and turbulence on dust explosions, Journal of Loss Prevention in the Process Industries, vol.10, issue.5-6, pp.5-6, 1997.
DOI : 10.1016/S0950-4230(97)00021-1

S. Ahmed and M. H. Back, A kinetic model for the low temperature oxidation of carbon: I, Combustion and Flame, vol.70, issue.1, pp.1-16, 1987.
DOI : 10.1016/0010-2180(87)90155-6

R. Andrews and D. Jacques, Purification and structural annealing of multiwalled carbon nanotubes at graphitization temperatures, Carbon, vol.39, issue.11, pp.1681-1687, 2001.
DOI : 10.1016/S0008-6223(00)00301-8

V. Babrauskas, Ignition Handbook, 2006.

W. Bartknecht, Explosionen : Ablauf und Schutzmassnahmen, 1978.

K. Benkiewicz and A. K. Hayashi, Aluminum dust ignition behind reflected shock wave: two-dimensional simulations, Fluid Dynamics Research, vol.30, issue.5, pp.269-292, 2002.
DOI : 10.1016/S0169-5983(02)00036-9

D. Bom and R. Andrews, Thermogravimetric Analysis of the Oxidation of Multiwalled Carbon Nanotubes:?? Evidence for the Role of Defect Sites in Carbon Nanotube Chemistry, Nano Letters, vol.2, issue.6, pp.615-619, 2002.
DOI : 10.1021/nl020297u

M. E. Brown, Introduction to Thermal Analysis. the Netherlands, 2001.

R. Brukh and S. Mitra, Kinetics of carbon nanotubeoxidation, J. Mater. Chem., vol.52, issue.7, pp.619-623, 2007.
DOI : 10.1016/0378-3820(79)90018-3

H. S. Caram and N. R. Amundson, Diffusion and Reaction in a Stagnant Boundary Layer about a Carbon Particle, Industrial & Engineering Chemistry Fundamentals, vol.16, issue.2, pp.171-181, 1977.
DOI : 10.1021/i160062a001

K. L. Cashdollar, Overview of dust explosibility characteristics, Journal of Loss Prevention in the Process Industries, vol.13, issue.3-5, pp.183-199, 2000.
DOI : 10.1016/S0950-4230(99)00039-X

C. Cesana and R. Siwek, Operating instructions 20L apparatus, 2001.

I. W. Chiang and B. E. Brinson, Purification and Characterization of Single-Wall Carbon Nanotubes (SWNTs) Obtained from the Gas-Phase Decomposition of CO (HiPco Process), The Journal of Physical Chemistry B, vol.105, issue.35, pp.8297-8301, 2001.
DOI : 10.1021/jp0114891

A. E. Dahoe, Dust explosions : a Study of flame propagation What is carbon black?, 2000.

O. Dufaud and M. Traore, Aluminium dusts explosions : does particle size matter? Risk, Reliabilty and Societal Safety-ESREL, 2007.

R. K. Eckhoff, Dust Explosions in the process industries, 2003.

N. Eisenreich and H. Fietzek, On the Mechanism of Low Temperature Oxidation for Aluminum Particles down to the Nano-Scale, Propellants, Explosives, Pyrotechnics, vol.29, issue.3, pp.137-145, 2004.
DOI : 10.1002/prep.200400045

P. Field, Dust explosion, 1982.

E. Fitzer and K. Kochling, Recommended terminology for the description of carbon as a solid (IUPAC Recommendations 1995), Pure and Applied Chemistry, vol.67, issue.3, pp.473-506, 1995.
DOI : 10.1351/pac199567030473

M. Y. Ha and B. R. Choi, A numerical study on the combustion of a single carbon particle entrained in a steady flow, Combustion and Flame, vol.97, issue.1, pp.1-16, 1994.
DOI : 10.1016/0010-2180(94)90112-0

M. Hull, Company Profile: Tetronics: plasma processing holds key to consistent nanopowders, Powder Metallurgy, vol.45, issue.1, pp.8-9, 2002.
DOI : 10.1179/pom.2002.45.1.8

E. Illekova and K. Csomorova, Kinetics of oxidation in various forms of carbon, Journal of Thermal Analysis and Calorimetry, vol.80, issue.1, pp.103-108, 2005.
DOI : 10.1007/s10973-005-0620-y

A. Ilyin and A. Gromov, Characterization of Aluminum Powders I. Parameters of Reactivity of Aluminum Powders, Propellants, Explosives, Pyrotechnics, vol.27, issue.6, pp.361-364, 2002.
DOI : 10.1002/prep.200290006

M. Jacobson and A. R. Cooper, Explosibility of metal powders, 1964.

D. E. Jones and Q. S. Kwok, Thermal properties of aluminium nanopowders, 2004.

D. E. Jones and P. D. Lightfoot, Comparative studies of the thermal properties of Aluminum nanopowders, 2002.

R. W. Kelsall and I. W. Hamley, Nanoscale Science and Technology. lag GmbH &Co, 2005.

C. Koch and W. Andrew, Nanostructured materials, Processing, Properties and Applications Explosion and flammability properties of furnace carbon blacks Archivum combustions, pp.1-4, 1992.

Q. S. Kwok and R. C. Fouchard, Characterization of Aluminum Nanopowder Compositions, Propellants, Explosives, Pyrotechnics, vol.27, issue.4, pp.229-240, 2002.
DOI : 10.1002/1521-4087(200209)27:4<229::AID-PREP229>3.0.CO;2-B

Q. S. Kwok and P. D. Lightfoot, Characterisation of passivated Aluminum nanopowders, 2001.

B. J. Landi and C. D. Cress, Thermal Oxidation Profiling of Single-Walled Carbon Nanotubes, Chemistry of Materials, vol.17, issue.26, pp.6819-6834, 2005.
DOI : 10.1021/cm052002u

A. Laurent, Sécurité des Procédés Chimiques -connaissances de base et méthodes d'analyse de risques, 2003.

O. Levenspiel, The Chemical reactor omnibook, 1989.

P. A. Libby and T. R. Blake, Theoretical study of burning carbon particles, Combustion and Flame, vol.36, pp.139-169, 1979.
DOI : 10.1016/0010-2180(79)90056-7

R. Lopez-fonseca and U. Elizundia, Kinetic analysis of non-catalytic and Mn-catalysed combustion of diesel soot surrogates, Applied Catalysis B: Environmental, vol.61, issue.1-2, pp.150-158, 2005.
DOI : 10.1016/j.apcatb.2005.04.016

S. Mannan, . Heinemann, M. M. Mench, and K. K. Kuo, Lee's Loss Prevention in the Process Industries Comparison of thermal behavior of regular and ultra-fine aluminum powders (Alex) made from plasma explosion process, Combust. Sci. Technol, vol.135, pp.269-292, 1998.

E. Mon and N. R. Amundson, Diffusion and Reaction in a Stagnant Boundary Layer about a Carbon Particle. 2. An Extension, Industrial & Engineering Chemistry Fundamentals, vol.17, issue.4, pp.313-321, 1978.
DOI : 10.1021/i160068a017

P. Moriarty, Nanostructured materials, Reports on Progress in Physics, vol.64, issue.3, pp.297-381, 2001.
DOI : 10.1088/0034-4885/64/3/201

K. Morishita and T. Takarada, Gasification behavior of carbon nanotubes, Carbon, vol.35, issue.7, pp.977-981, 1997.
DOI : 10.1016/S0008-6223(97)00052-3

J. P. Neeft and T. X. Nijhuis, Kinetics of the oxidation of diesel soot, Fuel, vol.76, issue.12, pp.1129-1136, 1997.
DOI : 10.1016/S0016-2361(97)00119-1

M. Nifuku and S. Koyanaka, Ignitability characteristics of aluminium and magnesium dusts that are generated during the shredding of post-consumer wastes, Journal of Loss Prevention in the Process Industries, vol.20, issue.4-6, pp.4-6, 2007.
DOI : 10.1016/j.jlp.2007.04.034

L. S. Pang and J. D. Saxby, Thermogravimetric analysis of carbon nanotubes and nanoparticles, The Journal of Physical Chemistry, vol.97, issue.27, 1993.
DOI : 10.1021/j100129a001

K. Park and D. Lee, Size-Resolved Kinetic Measurements of Aluminum Nanoparticle Oxidation with Single Particle Mass Spectrometry, The Journal of Physical Chemistry B, vol.109, issue.15, pp.7290-7299, 2005.
DOI : 10.1021/jp048041v

J. Petit, Les mélanges explosifs, Partie, vol.2, 2006.

A. Pivkinan and Y. Frolov, Thermal properties of nanosized energetic materials, 2003.

C. Proust, Formation-Inflammation-Combustion des atmosphères explosives (ATEX) et effets associés. Génie des procédés, p.278, 2004.

J. A. Puszynski, Formation of Aluminum Nanopowders and their application in nanoenergetic materials. Rapid City, Northcentral States Nanosystems Consortium Seminar, 2005.

G. A. Risha and S. F. Son, Combustion of nano-aluminum and liquid water, Proceedings of the combustion Institute, pp.2029-2036, 2007.
DOI : 10.1016/j.proci.2006.08.056

P. Roth and O. Brandt, High temperature oxidation of suspended soot particles verified by CO and CO2 measurements, Twenty third Symposium on combustion, 1990.
DOI : 10.1016/S0082-0784(06)80417-0

G. Schmidt and M. Baumle, Current and future applications of nanoclusters, Chemical Society Reviews, vol.28, issue.3, pp.179-185, 1999.
DOI : 10.1039/a801153b

A. Schröder and M. Klüppel, Surface energy distribution of carbon black measured by static gas adsorption, Carbon, vol.40, issue.2, pp.207-210, 2001.
DOI : 10.1016/S0008-6223(01)00175-0

A. J. Shakesheff, Problems and solutions of current manufacture of nanoparticles. Nanomaterials-A risk to health at work-First, International Symposium on Occupationnal Health Implications of Nanomaterials, 2004.

T. Shimada and H. Yanase, Points of onset of gasification in a multi-walled carbon nanotube having an imperfect structure, Carbon, vol.42, issue.8-9, pp.1635-1639, 2004.
DOI : 10.1016/j.carbon.2004.02.019

B. R. Stanmore and J. F. Brilhac, The oxidation of soot: a review of experiments, mechanisms and models, Carbon, vol.39, issue.15, pp.2247-2268, 2001.
DOI : 10.1016/S0008-6223(01)00109-9

J. Sun and M. L. Pantoya, Dependence of size and size distribution on reactivity of aluminum nanoparticles in reactions with oxygen and MoO3, Thermochimica Acta, vol.444, issue.2, pp.117-127, 2006.
DOI : 10.1016/j.tca.2006.03.001

M. Traoré, Explosions de poussières et de mélanges hybrides Etude paramétriques et relation entre la cinétique de combustion et la violence d'explosion. Génie des Procédés, 2007.

M. A. Trunov and M. Schoenitz, Ignition of Aluminum Powders Under Different Experimental Conditions, Propellants, Explosives, Pyrotechnics, vol.29, issue.3, pp.36-43, 2005.
DOI : 10.1002/prep.200400083

M. A. Trunov and M. Schoenitz, Effect of polymorphic phase transformations in alumina layer on ignition of aluminium particles, Combustion Theory and Modelling, vol.4, issue.4, pp.603-624, 2006.
DOI : 10.1557/JMR.1998.0088

S. R. Turns, An introduction to Combustion : concepts and applications, 1996.

V. Wal, R. L. , and A. J. Tomasek, Soot oxidation : dependence upon initial nanostructure, Combustion and Flame, vol.134, issue.12, pp.1-9, 2003.

J. Villermaux, Génie de la réaction chimique-Conception et fonctionnments des réacteurs, 1993.

H. G. Wolfhard and I. Glassman, Heterogeneous Combustion, 1964.

Y. Yang and H. Zou, Enrichment of Large-Diameter Single-Walled Carbon Nanotubes by Oxidative Acid Treatment, The Journal of Physical Chemistry B, vol.106, issue.29, pp.7160-7162, 2002.
DOI : 10.1021/jp015600e

G. E. Andrews and D. Bradley, The burning velocity of methane-air mixtures, Combustion and Flame, vol.19, issue.2, pp.275-288, 1972.
DOI : 10.1016/S0010-2180(72)80218-9

V. Babrauskas, Ignition Handbook, 2006.

D. R. Ballal, Flame Propagation Through Dust Clouds of Carbon, Coal, Aluminium and Magnesium in an Environment of Zero Gravity, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.385, issue.1788, pp.21-51, 1983.
DOI : 10.1098/rspa.1983.0003

D. R. Ballal and H. Lefebvre, Ignition and flame quenching of flowing heterogeneous fuel-air mixtures, Combustion and Flame, vol.35, pp.155-168, 1979.
DOI : 10.1016/0010-2180(79)90019-1

W. Bartknecht, Dust Explosions -Course, Prevention, Protection, 1989.

M. W. Beckstead and B. R. Newbold, A Summary of Aluminum Combustion. 50th JANNAF Propulsion Meeting, CPIA Publication, vol.705, issue.1, pp.201-220, 2001.

K. Benkiewicz and A. K. Hayashi, Aluminum dust ignition behind reflected shock wave: two-dimensional simulations, Fluid Dynamics Research, vol.30, issue.5, pp.269-292, 2002.
DOI : 10.1016/S0169-5983(02)00036-9

R. B. Bird and W. E. Stewart, Transport Phenomena, 2002.

P. E. Bocanegra, Experimental studies on the propagation velocity and temperature of flames in aluminum micro-and nanoparticle clouds. 21st International ColIoqium on the Dynamics of explosions and reactive systems-ICDERS, 2007.

L. V. Boichuk and V. G. Shevchuk, Flame propagtion in two-component aluminum-boron gas suspensions, Combustion, Explosion, and Shock Waves, vol.38, issue.6, pp.651-654, 2002.
DOI : 10.1023/A:1021136126730

H. S. Caram and N. R. Amundson, Diffusion and Reaction in a Stagnant Boundary Layer about a Carbon Particle, Industrial & Engineering Chemistry Fundamentals, vol.16, issue.2, pp.171-181, 1977.
DOI : 10.1021/i160062a001

H. M. Cassel, Some fundamental aspects of dust flames. Reports of investigations 651, 1963.

C. Cesana and R. Siwek, Operating instructions 20 L apparatus, 2001.

J. Chaineaux, Etude bibliographique sur la caractérisation d'inflammabilité et d'explosion de l, 1991.

A. E. Dahoe, Dust explosions : a Study of flame propagation, 2000.

A. E. Dahoe and R. S. Cant, On the decay of turbulence in the 20-litre explosion sphere, Flow, Turbulence and Combustion, vol.67, issue.3, pp.159-184, 2001.
DOI : 10.1023/A:1015099110942

E. L. Dreizin, Experimental study of stages in aluminium particle combustion in air, Combustion and Flame, vol.105, issue.4, pp.541-556, 1996.
DOI : 10.1016/0010-2180(95)00224-3

E. L. Dreizin and M. A. Trunov, Surface phenomena in aluminum combustion, Combustion and Flame, vol.101, issue.3, pp.378-382, 1995.
DOI : 10.1016/0010-2180(94)00241-J

R. K. Eckhoff, Dust Explosions in the process industries, 2003.

N. Eisenreich and H. Fietzek, On the Mechanism of Low Temperature Oxidation for Aluminum Particles down to the Nano-Scale, Propellants, Explosives, Pyrotechnics, vol.29, issue.3, pp.137-145, 2004.
DOI : 10.1002/prep.200400045

E. Esposito, Combustion en prémélange gazeux, p.315, 1995.

R. H. Essenhigh and K. M. Misra, Ignition of coal particles: A review, Combustion and Flame, vol.77, issue.1, pp.3-30, 1989.
DOI : 10.1016/0010-2180(89)90101-6

S. Froeschke and S. Kohler, Impact fragmentation of nanoparticle agglomerates, Journal of Aerosol Science, vol.34, issue.3, pp.275-287, 2003.
DOI : 10.1016/S0021-8502(02)00185-4

B. Genova and M. Silvestrini, Correlations for flame speed and explosion overpressure of dust clouds inside industrial enclosures, Journal of Loss, 2007.

M. Glor, Electrostatic Hazards in Powder Handling, 1988.

S. Gordon and B. J. Mcbride, Computer program for calculation of complex chemical equilibrium compositions ans applications : Part 1 : Analysis, p.1311, 1994.

S. Gordon and B. J. Mcbride, Computer program for calculation of complex chemical equilibrium compositions and applications. Part 2 : Users Manual and Program Description, p.1311, 1996.

S. Goroshin and M. Bidabadi, Quenching distance of laminar flame in aluminum dust clouds, Combustion and Flame, vol.105, issue.1-2, pp.147-160, 1996.
DOI : 10.1016/0010-2180(95)00183-2

S. Goroshin and I. Fomenko, Burning velocities in fuel-rich aluminum dust clouds, Proceedings of the combustion Institute, pp.1961-1967, 1996.
DOI : 10.1016/S0082-0784(96)80019-1

S. Goroshin and M. Kolbe, Flame speed in a binary suspension of solid fuel particles, Proceedings of the combustion Institute, pp.2811-2817, 2000.
DOI : 10.1016/S0082-0784(00)80703-1

Y. Huang and G. A. Risha, Analysis of Nano-Aluminum Particle Dust Cloud Combustion in Different Oxidizer Environments, 43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005.
DOI : 10.1080/00102208708952584

Y. Huang and G. A. Risha, Flame propagation in Bimodal Nano/microsized Aluminum Particles/Air Mixtures, 2005.

Y. Huang and G. A. Risha, Combustion of bimodal nano/micron-sized aluminum particle dust in air, Proceedings of the Combustion Institute, vol.31, issue.2, 2006.
DOI : 10.1016/j.proci.2006.08.103

Y. Huang and G. A. Risha, Flame propagation in Bimodal Nano/microsized Aluminum Particles/Air Mixtures, 2006.

M. Hull, Company Profile: Tetronics: plasma processing holds key to consistent nanopowders, Powder Metallurgy, vol.45, issue.1, pp.8-9, 2002.
DOI : 10.1179/pom.2002.45.1.8

M. Jacobson and A. R. Cooper, Explosibility of metal powders, 1964.

G. Jaeckel, Die Staubexplosionen. Zeitschrift für Technische Physik, pp.67-78, 1924.

P. M. Krishenik and E. N. Rumanov, Modeling of combustion wave propagation in a carbon dust/gas mixture, Combustion and Flame, vol.99, issue.3-4, pp.3-4, 1994.
DOI : 10.1016/0010-2180(94)90066-3

J. C. Laforest and J. Leleu, Réactions chimiques dangereuses-Essai de prévision des risques, 1981.

O. Levenspiel, The Chemical reactor omnibook, 1989.

V. I. Levitas and B. W. Asay, Melt dispersion mechanism for fast reaction of nanothermites, Applied Physics Letters, vol.89, issue.7, 2006.
DOI : 10.1023/A:1022466319501

V. I. Levitas and M. L. Pantoya, Melt dispersion versus diffusive oxidation mechanism for aluminum nanoparticules : critical experiments and controlling parameters, Applied Physics Letters, vol.92, 2007.

T. Matsuda and M. Yashima, Ignition characteristics of zirconium dust, 2000.

H. Mellottée, Combustion des métaux, prévention et lutte, 1978.

E. Mon and N. R. Amundson, Diffusion and Reaction in a Stagnant Boundary Layer about a Carbon Particle. 2. An Extension, Industrial & Engineering Chemistry Fundamentals, vol.17, issue.4, pp.313-321, 1978.
DOI : 10.1021/i160068a017

M. F. Mulcahy and I. W. Smith, Kinetics of combustion of pulverized fuel : A review of theory and experiment, Reviews of Pure Applied Chemistry, vol.19, pp.81-108, 1969.

S. Nomura and T. G. Calcott, Calculation of the ignition sensitivity of dust clouds of varying size distributions, Powder Technology, vol.45, issue.2, pp.145-154, 1986.
DOI : 10.1016/0032-5910(66)80006-2

K. Park and D. Lee, Size-Resolved Kinetic Measurements of Aluminum Nanoparticle Oxidation with Single Particle Mass Spectrometry, The Journal of Physical Chemistry B, vol.109, issue.15, pp.7290-7299, 2005.
DOI : 10.1021/jp048041v

T. P. Parr and C. Johnson, Evaluation of advanced fuels for underwater propulsion, 2003.

N. B. Pilling and R. E. Bedworth, The oxidation of metals at high temperature, Journal of the Institute of Metals, vol.29, pp.529-582, 1923.

T. Poinsot and D. Veynante, Theorical and numerical combustion, 2001.

C. Proust, Dust explosions in pipes, Journal of Loss Prevention in the process industries, vol.9, issue.4, pp.266-277, 1996.
URL : https://hal.archives-ouvertes.fr/ineris-00962653

C. Proust, Formation-Inflammation-Combustion des atmosphères explosives (ATEX) et effets associés. Génie des procédés, p.278, 2004.

C. Proust, A few fundamental aspects about ignition and flame propagation in dust clouds, Journal of Loss Prevention in the Process Industries, vol.19, issue.2-3, pp.104-120, 2006.
DOI : 10.1016/j.jlp.2005.06.035

URL : https://hal.archives-ouvertes.fr/ineris-00969957

A. Rai and K. Park, Understanding the mechanism of aluminium nanoparticle oxidation, Combustion Theory and Modelling, vol.81, issue.5, p.843, 2006.
DOI : 10.1080/01418610108216662

A. Renoux and D. Boulaud, Physique des aérosols-Partie 1, 2003.

P. Roth and O. Brandt, High temperature oxidation of suspended soot particles verified by CO and CO2 measurements, Twenty third Symposium on combustion, 1990.
DOI : 10.1016/S0082-0784(06)80417-0

H. Rumpf, Agglomeration, 1962.

S. R. Saraf and W. J. Rogers, Prediction of reactive hazards based on molecular structure, Journal of Hazardous Materials, vol.98, issue.1-3, pp.1-3, 2003.
DOI : 10.1016/S0304-3894(02)00314-X

E. S. Shanley and G. A. Melhem, A review and critique of ASTM CHETAH 4th edition, version 7.2, Journal of Loss Prevention in the Process Industries, vol.13, issue.1, pp.67-68, 2000.
DOI : 10.1016/S0950-4230(99)00027-3

T. Skjold, Review of the DESC project, Journal of Loss Prevention in the Process Industry, 2007.
DOI : 10.1016/j.jlp.2007.04.017

D. B. Spalding, The combustion of liquid fuels, Proceedings of the Combustion Institute, pp.847-864, 1953.

B. R. Stanmore and J. F. Brilhac, The oxidation of soot: a review of experiments, mechanisms and models, Carbon, vol.39, issue.15, pp.2247-2268, 2001.
DOI : 10.1016/S0008-6223(01)00109-9

E. Suvaci and G. L. Messing, The Reaction-Bonded Aluminum Oxide Process: I, The Effect of Attrition Milling on the Solid-State Oxidation of Aluminum Powder, Journal of the American Ceramic Society, vol.51, issue.7, pp.299-305, 2000.
DOI : 10.1016/B978-0-12-341831-9.50024-3

G. A. Szekely and S. R. Turns, Effects of carbon-black properties on combustion of carbon-black slurry agglomerates, Combustion and Flame, vol.58, issue.1, pp.31-43, 1984.
DOI : 10.1016/0010-2180(84)90076-2

J. G. Torrent and I. S. Armada, A correlation between composition and explosibility index for coal dust, Fuel, vol.67, issue.12, pp.1629-1632, 1988.
DOI : 10.1016/0016-2361(88)90206-2

J. G. Torrent and J. C. Fuchs, Improvement in the correlation between the composition index and the explosibility index for coal dust, Fuel, vol.70, issue.9, pp.1099-1101, 1991.
DOI : 10.1016/0016-2361(91)90266-D

M. Traoré, Explosions de poussières et de mélanges hybrides Etude paramétriques et relation entre la cinétique de combustion et la violence d'explosion. Génie des Procédés, 2007.

M. A. Trunov and M. Schoenitz, Ignition of Aluminum Powders Under Different Experimental Conditions, Propellants, Explosives, Pyrotechnics, vol.29, issue.3, pp.36-43, 2005.
DOI : 10.1002/prep.200400083

M. A. Trunov and M. Schoenitz, Effect of polymorphic phase transformations in Al2O3 film on oxidation kinetics of aluminum powders, Combustion and Flame, vol.140, issue.4, pp.310-318, 2005.
DOI : 10.1016/j.combustflame.2004.10.010

M. A. Trunov and M. Schoenitz, Effect of polymorphic phase transformations in alumina layer on ignition of aluminium particles, Combustion Theory and Modelling, vol.4, issue.4, pp.603-624, 2006.
DOI : 10.1557/JMR.1998.0088

S. R. Turns, An introduction to Combustion : concepts and applications, 1996.

P. G. Wel, Ignition and propagation of dust explosions Combustion Theory, 1985.

H. G. Wolfhard and I. Glassman, Heterogeneous Combustion, 1964.

T. Zeng and W. B. Fu, The ratio CO/CO2 of oxidation on a burning carbon surface, Combustion and Flame, vol.107, issue.3, pp.197-210, 1996.
DOI : 10.1016/S0010-2180(96)00071-5

B. H. Bazin, Un enjeu majeur pour la santé au travail ?, 2007.

C. Delvosalle and C. Fiévez, Methodology for identification of major accidents hazards and methodology for the identification of reference accidents scenarios, 2004.

T. A. Kletz, Inherently Safer Design???Its Scope and Future, Process Safety and Environmental Protection, vol.81, issue.6, pp.401-405, 2003.
DOI : 10.1205/095758203770866566

A. Kühner, Final Report Calibration-Round-Robin CaRo 05, online reports, 2005.

A. Laurent, Sécurité des Procédés Chimiques -connaissances de base et méthodes d'analyse de risques, 2003.

L. E. Murr and E. V. Esquivel, Characterization of nanostructure phenomena in airborne particulate aggregates and their potential for respiratory health effects, Journal of Materials Science: Materials in Medicine, vol.15, issue.3, pp.237-247, 2004.
DOI : 10.1023/B:JMSM.0000015483.06136.68

G. Oberdörster and Z. Sharp, EXTRAPULMONARY TRANSLOCATION OF ULTRAFINE CARBON PARTICLES FOLLOWING WHOLE-BODY INHALATION EXPOSURE OF RATS, Journal of Toxicology and Environmental Health, Part A, vol.163, issue.3, pp.1531-1574, 2002.
DOI : 10.1080/00984100290071649

C. Ostiguy and G. Lapointe, Les nanoparticules : État des connaissances sur les risques en santé et sécurité du travail, 2006.

A. J. Shakesheff, Problems and solutions of current manufacture of nanoparticles. Nanomaterials-A risk to health at work-First, International Symposium on Occupationnal Health Implications of Nanomaterials, 2004.

S. Sklet, Safety barriers: Definition, classification, and performance, Journal of Loss Prevention in the Process Industries, vol.19, issue.5, pp.494-506, 2006.
DOI : 10.1016/j.jlp.2005.12.004

A. Vignes and J. Bouillard, Preliminary Report on Safety Parameters and Characterisation Techniques for nanoparticles, p.131, 2006.

R. Vincent and F. Bonthoux, Méthodologie d'évaluation simplifiée du risque chimique: un outil d'aide à la décision, Eds, pp.INRS-CNPP, 2005.

E. Allen and J. Henshaw, A review of Particle Agglomeration, 2001.

D. H. Bache, Floc rupture and turbulence: a framework for analysis, Chemical Engineering Science, vol.59, issue.12, pp.2521-2534, 2004.
DOI : 10.1016/j.ces.2004.01.055

R. B. Bird and W. E. Stewart, Transport Phenomena, 2002.

S. Brunauer and P. H. Emmett, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, pp.309-319, 1938.
DOI : 10.1021/ja01269a023

C. Coufort, Analyse expérimentale de la floculation en réacteur de Taylor-Couette : Influence de l'hydrodynamique sur les phénomènes d'agglomération et de rupture, Sciences des Procédés, 2004.

M. Fanelli and D. L. Fekea, Prediction of the dispersion of particle clusters in the nano-scale???Part I: Steady shearing responses, Chemical Engineering Science, vol.61, issue.2, pp.473-488, 2006.
DOI : 10.1016/j.ces.2005.07.024

S. Froeschke and S. Kohler, Impact fragmentation of nanoparticle agglomerates, Journal of Aerosol Science, vol.34, issue.3, pp.275-287, 2003.
DOI : 10.1016/S0021-8502(02)00185-4

S. Hansen and D. V. Khakhar, Dispersion of solids in nonhomogeneous viscous flows, Chemical Engineering Science, vol.53, issue.10, pp.1803-1817, 1998.
DOI : 10.1016/S0009-2509(98)00010-4

J. O. Hinze, Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes, AIChE Journal, vol.1, issue.3, pp.289-295, 1955.
DOI : 10.1002/aic.690010303

A. N. Kolmogorov, On the breakage of drops in a turbulent flow, Dokl. Akad. Navk. SSSR, vol.66, pp.825-828, 1949.

O. Levenspiel, The Chemical reactor omnibook, OSU Book stores, 1989.

N. Midoux, L. Perrin, and M. Piperaud, Mécanique et Rhéologie des fluides en génie chimique Electrostatic Hazards : How could we be sure to measure the right parameters ? Journal of Loss Prevention in the Process Industries, pp.207-217, 1993.

H. Rumpf, Agglomeration, 1962.

M. Traoré, Explosions de poussières et de mélanges hybrides Etude paramétriques et relation entre la cinétique de combustion et la violence d'explosion. Génie des Procédés, 2007.

J. Villermaux, Génie de la réaction chimique-Conception et fonctionnments des réacteurs, 1993.

R. Wengeler and H. Nirschl, Turbulent hydrodynamic stress induced dispersion and fragmentation of nanoscale agglomerates, Journal of Colloid and Interface Science, vol.306, issue.2, pp.262-273, 2007.
DOI : 10.1016/j.jcis.2006.10.065