G. H. Hu, K. H. Buschow, R. W. Cahn, M. C. Flemings, and B. Ilschner, Reactive Polymer Processing: Fundamentals of Reactive Extrusion, Encyclopaedia of Materials

D. B. Todd, Mixing of Highly Viscous Fluids, Polymers, and Pastes. In Handbook of Industrial Mixing: Science and Practice, pp.987-1025, 2004.

T. Sakai, Intermeshing twin-screw extruder Mixing in continuous flow system, Mixing and Compounding of 2.6 References [1]. Nauman, 1983.

A. Kiani, P. Heidemeyer, and R. Pallas, Study of flow and RTD in a ZSK twin screw extruder, pp.94-99, 1997.

C. K. Jen, C. K. Shih, and D. A. Denelsbeck, Application of ultrasound in the determination of fundamental extrusion performance: residence time distribution measurement, Polymer Engineering and Science, vol.43, issue.1, pp.102-111, 2003.

C. K. Shih and U. Sundararaj, Determination of residence time distribution during twin screw extrusion of model fluids, pp.3707-3712, 1997.

E. Unlu and J. Faller, Geometric mean vs. Arithmetic mean in extrusion residence time studies, Polymer Engineering & Science, vol.63, issue.5, pp.743-751, 2001.
DOI : 10.1002/pen.10770

W. I. Patterson and J. M. Dealy, On-line measurement of residence time distribution in a twin-screw extruder. International Polymer Processing, pp.3-9, 1995.

O. S. Carneiro, J. A. Covas, J. A. Ferreira, and M. F. Cerqueira, On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruder, Polymer Testing, vol.23, issue.8, pp.23-925, 2004.
DOI : 10.1016/j.polymertesting.2004.05.001

G. H. Hu and I. Kadri, Preparation of macromolecular tracers and their use for studying the residence time distribution of polymeric systems, Polymer Engineering & Science, vol.61, issue.2, pp.299-311, 1999.
DOI : 10.3139/217.950003

G. H. Hu, I. Kadri, and C. Picot, One-line measurement of the residence time distribution in screw extruders, Polymer Engineering & Science, vol.61, issue.5, pp.930-939, 1999.
DOI : 10.3139/217.950003

Y. J. Sun, G. H. Hu, M. Lambla, and H. K. Kotlar, In situ compatibilization of polypropylene and poly(butylene terephthalate) polymer blends by one-step reactive extrusion, Polymer, vol.37, issue.18, pp.37-4119, 1996.
DOI : 10.1016/0032-3861(96)00229-7

H. Cartier and G. H. Hu, Morphology development ofin situ compatibilized semicrystalline polymer blends in a co-rotating twin-screw extruder, Polymer Engineering & Science, vol.37, issue.6, pp.996-1013, 1999.
DOI : 10.1002/masy.19880160103

H. Cartier and G. H. Hu, Plastification or melting: A critical process for free radical grafting in screw extruders, Polymer Engineering & Science, vol.37, issue.1, pp.177-185, 1998.
DOI : 10.1002/pen.10178

G. H. Hu and H. Cartier, Free Radical Grafting of Glycidyl Methacrylate onto PP in a Co-rotating Twin Screw Extruder, International Polymer Processing, vol.13, issue.2, pp.111-117, 1998.
DOI : 10.3139/217.980111

G. H. Hu, K. H. Buschow, R. W. Cahn, M. C. Flemings, B. Ilschner et al., Reactive Polymer Processing: Fundamentals of Reactive Extrusion, Encyclopaedia of Materials: Science and Technology

Z. B. Xu, L. F. Feng, G. H. Hu, L. G. Wang, X. M. Zhang et al., An apparatus for in-line measurement of the residence time distribution of thermomechanically complex systems, pp.7-16, 2005.

J. Gao, G. C. Walsh, D. Bigio, R. M. Briber, and M. D. Wetzel, Residence-time distribution model for twin-screw extruders, AIChE Journal, vol.22, issue.12, pp.45-2541, 1999.
DOI : 10.3139/217.950111

M. K. Razaviaghjeh, H. Nazockdast, and H. Assempour, Determination of the residence time distribution in twin screw extruders via free radical modification of PE. International Polymer Processing, pp.335-341, 2004.

L. Chen and G. H. Hu, Applications of a statistical theory in residence time distributions, AIChE Journal, vol.2, issue.9, pp.1558-1562, 1993.
DOI : 10.1016/0009-2509(53)80001-1

L. Chen, Z. Pan, and G. H. Hu, Residence time distribution in screw extruders, AIChE Journal, vol.8, issue.9, pp.1455-1464, 1993.
DOI : 10.1016/0260-8774(88)90058-1

L. Chen, G. H. Hu, and J. Lindt, Residence time distribution in non-intermeshing counter-rotating twin-screw extruders, Polymer Engineering and Science, vol.25, issue.7, pp.35-598, 1995.
DOI : 10.1002/pen.760350706

A. Poulesquen, B. Vergnes, P. Cassagnau, A. Michel, O. S. Carneiro et al., A study of residence time distribution in co-rotating twin-screw extruders
URL : https://hal.archives-ouvertes.fr/hal-00531608

J. P. Puaux, G. Bozga, and A. Ainser, Residence time distribution in a corotating twin-screw extruder, Chemical Engineering Science, vol.55, issue.9, pp.1641-1651, 2000.
DOI : 10.1016/S0009-2509(99)00430-3

URL : https://hal.archives-ouvertes.fr/hal-01703131

T. J. Melo and S. V. Canevarolo, In-line optical detection in the transient state of extrusion polymer blending and reactive processing, Polymer Engineering & Science, vol.35, issue.1, pp.11-19, 2005.
DOI : 10.1002/pen.10938

S. M. Lee, J. C. Park, S. M. Lee, Y. J. Ahn, and J. W. Lee, In-line measurement of residence time distribution in twin-screw extruder using non-destructive ultrasound, Korea-Australia Rheology Journal, vol.17, issue.2, pp.87-95, 2005.

L. A. Pinheiro, M. A. Chinelatto, and S. V. Canevarolo, The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation, Polymer Degradation and Stability, vol.86, issue.3, pp.445-453, 2004.
DOI : 10.1016/j.polymdegradstab.2004.05.016

E. B. Nauman, B. A. Buffham, J. Gao, G. C. Walsh, D. Bigio et al., Mixing in continuous flow system Residence-time distribution model for twin-screw extruders, AIChE Journal, issue.12, pp.45-2541, 1983.

D. I. Bigio, M. D. Wetzel, and S. R. Raghavan, Influence of polymer viscoelasticity on the residence distributions of extruders, AIChE Journal, vol.52, issue.4, pp.1451-1459, 2006.

J. Gao, G. C. Walsh, D. Bigio, R. M. Briber, and M. D. Wetzel, Mean residence time analysis for twin screw extruders, Polymer Engineering & Science, vol.44, issue.1, pp.227-237, 2000.
DOI : 10.3139/217.940108

M. D. Wetzel, C. K. Shih, and U. Sundararaj, Determination of residence time distribution during twin screw extrusion of model fluids, pp.3707-3712, 1997.

H. Potente, K. Kretschmer, T. Preu, and J. Flecke, Investigation of the local residence time distribution in special mixing elements for co-rotating twin screw extruders, SPE ANTEC Tech. Papers, vol.48, pp.273-277, 2002.

T. Winkelmann, Process behavior of special mixing elements in twin-screw extruders, International Polymer Processing, vol.16, issue.4, pp.341-350, 2001.

Y. Xie, D. Tomayko, D. I. Bigio, and G. Batch, On the Effect of Operating Parameters and Screw Configuration on Residence Time Distribution, Journal of Reinforced Plastics and Composites, vol.17, issue.15, pp.17-1338, 1998.
DOI : 10.1002/pen.760240906

P. Elkouss, D. Bigio, G. C. Walsh, and P. Andersen, Mean residence time characterization in co-rotating twin screw extruder: screw configuration comparison, SPE ANTEC Tech. Papers, vol.46, pp.29-33, 2000.

L. Oberlehner, P. Caussagnau, and A. Michel, Local residence time distribution in a twin screw extruder, Chemical Engineering Science, vol.49, issue.23, pp.49-3897, 1994.
DOI : 10.1016/0009-2509(94)00190-1

X. M. Zhang, Z. B. Xu, L. F. Feng, X. B. Song, and G. H. Hu, Assessing local residence time distributions in screw extruders through a new in-line measurement instrument, Polymer Engineering & Science, vol.43, issue.4, pp.510-519, 2006.
DOI : 10.3139/217.1842

URL : https://hal.archives-ouvertes.fr/hal-00281188

Z. B. Xu, L. F. Feng, G. H. Hu, L. G. Wang, X. M. Zhang et al., An apparatus for in-line measurement of the residence time distribution of thermomechanically complex systems, pp.7-16, 2005.

P. Elkouss, D. Bigio, and M. D. Wetzel, Deconvolution of residence time distribution signals to individually describe zones for better modeling, SPE ANTEC, pp.344-348, 2003.

G. E. Gasner, D. Bigio, C. Marks, F. Magnus, and C. Kiehl, A new approach to analyzing residence time and mixing in a co-rotating twin screw extruder, Polymer Engineering & Science, vol.26, issue.2, pp.286-298, 1999.
DOI : 10.3139/217.950111

Y. J. Sun, G. H. Hu, and M. Lambla, Free radical grafting of glycidyl methacrylate onto polypropylene in a co-rotating twin screw extruder, Journal of Applied Polymer Science, vol.57, issue.9, pp.1043-1054, 1995.
DOI : 10.1002/app.1995.070570903

G. H. Hu, Y. J. Sun, and M. Lambla, Effects of processing parameters on thein situ compatibilization of polypropylene and poly(butylene terephthalate) blends by one-step reactive extrusion, Journal of Applied Polymer Science, vol.61, issue.6, pp.61-1039, 1996.
DOI : 10.1002/(SICI)1097-4628(19960808)61:6<1039::AID-APP18>3.0.CO;2-R

G. H. Hu and I. Kadri, Preparation of macromolecular tracers and their use for studying the residence time distribution of polymeric systems, Polymer Engineering & Science, vol.61, issue.2, pp.299-311, 1999.
DOI : 10.3139/217.950003

G. H. Hu, I. Kadri, and C. Picot, One-line measurement of the residence time distribution in screw extruders, Polymer Engineering & Science, vol.61, issue.5, pp.930-939, 1999.
DOI : 10.3139/217.950003

R. Mudalamane and D. Bigio, Experimental characterization of fill length behavior in extruders, Polymer Engineering and Science, vol.32, issue.3, pp.557-563, 2004.
DOI : 10.1016/0377-0257(89)85039-6

L. Chen and G. H. Hu, Applications of a statistical theory in residence time distributions, AIChE Journal, vol.2, issue.9, pp.1558-1562, 1993.
DOI : 10.1016/0009-2509(53)80001-1

L. Chen, Z. Pan, and G. H. Hu, Residence time distribution in screw extruders, AIChE Journal, vol.8, issue.9, pp.1455-1464, 1993.
DOI : 10.1016/0260-8774(88)90058-1

G. H. Hu and J. Lindt, Residence time distribution in non-intermeshing counter-rotating twin-screw extruders, Polymer Engineering and Science, issue.7, pp.35-598, 1995.

J. Gao, G. C. Walsh, D. Bigio, R. M. Briber, and M. D. Wetzel, Residence-time distribution model for twin-screw extruders, AIChE Journal, vol.22, issue.12, pp.45-2541, 1999.
DOI : 10.3139/217.950111

D. Valle, G. Delamare, and L. , A global computer software for polymer flows in corotating twin screw extruders, Polymer Engineering and Science, vol.38, issue.11, pp.1781-1792, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00573794

L. J. Zhu, K. A. Narh, and K. S. Hyun, Evaluation of numerical simulation methods in reactive extrusion Advances in Polymer Technology, pp.183-193, 2005.

P. Cassagnau, V. Bounor-legare, and F. Fenouillot, Reactive Processing of Thermoplastic Polymers: A Review of the Fundamental Aspects, International Polymer Processing, vol.22, issue.3, pp.218-258, 2007.
DOI : 10.3139/217.2032

URL : https://hal.archives-ouvertes.fr/hal-00372772

V. L. Bravo, A. N. Hrymak, and J. Wright, Numerical simulation of pressure and velocity profiles in kneading elements of a co-rotating twin screw extruder, Polymer Engineering & Science, vol.19, issue.2, pp.525-541, 2000.
DOI : 10.3139/217.890262

V. L. Bravo, A. N. Hrymak, and J. D. Wright, Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruders, Polymer Engineering and Science, vol.58, issue.4, pp.779-793, 2004.
DOI : 10.3139/217.1637

T. Ishikawa, S. I. Kihara, and K. Funatsu, 3-D numerical simulations of nonisothermal flow in co-rotating twin screw extruders, Polymer Engineering & Science, vol.42, issue.2, pp.357-364, 2000.
DOI : 10.4325/seikeikakou.5.557

T. Ishikawa, S. I. Kihara, and K. Funatsu, 3-D non-isothermal flow field analysis and mixing performance evaluation of kneading blocks in a co-rotating twin srew extruder, Polymer Engineering & Science, vol.27, issue.5, pp.41-840, 2001.
DOI : 10.3139/217.1590

T. Ishikawa, T. Amano, S. I. Kihara, and K. Funatsu, Flow patterns and mixing mechanisms in the screw mixing element of a co-rotating twin-screw extruder, Polymer Engineering & Science, vol.27, issue.5, pp.42-925, 2002.
DOI : 10.3139/217.940291

A. Lawal, D. M. Kalyon, and Z. H. Li, Computational study of chaotic mixing in co-rotating two-tipped kneading paddles: Two-dimensional approach, Polymer Engineering and Science, vol.16, issue.3, pp.140-148, 1993.
DOI : 10.1007/978-1-4757-4257-2

T. Avalosse, Numerical simulation of distributive mixing in 3-D flows, Macromolecular Symposia, vol.9, issue.1, pp.91-98, 1996.
DOI : 10.3139/217.940003

T. Avalosse and Y. Rubin, Analysis of Mixing in Corotating Twin Screw Extruders through Numerical Simulation, International Polymer Processing, vol.15, issue.2, pp.117-123, 2000.
DOI : 10.3139/217.1586

B. Alsteens, V. Legat, and T. Avalosse, Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder, International Polymer Processing, vol.19, issue.3, pp.207-217, 2004.
DOI : 10.3139/217.1836

T. Avalosse, Y. Rubin, and L. Fondin, Non-Isothermal Modeling of Co-Rotating and Contra-Rotating Twin Screw Extruders, Journal of Reinforced Plastics and Composites, vol.21, issue.5, pp.419-429, 2002.
DOI : 10.3139/217.1586

R. K. Connelly and J. L. Kokini, 2-D numerical simulation of differential viscoelastic fluids in a single-screw continuous mixer: Application of viscoelastic finite element methods, Advances in Polymer Technology, vol.66, issue.1, pp.22-41, 2003.
DOI : 10.1016/0009-2509(85)80091-9

R. K. Connelly and J. L. Kokini, The effect of shear thinning and differential viscoelasticity on mixing in a model 2D mixer as determined using FEM with particle tracking, Journal of Non-Newtonian Fluid Mechanics, vol.123, issue.1, pp.1-17, 2004.
DOI : 10.1016/j.jnnfm.2004.03.006

R. K. Connelly and J. K. Kokini, Mixing simulation of a viscous Newtonian liquid in a twin sigma blade mixer, AIChE Journal, vol.27, issue.10, pp.52-3383, 2006.
DOI : 10.3139/217.940291

O. Breuer, H. B. Chen, B. Lin, and U. Sundararaj, Simulation and visualization of flow in a new miniature mixer for multiphase polymer systems, Journal of Applied Polymer Science, vol.35, issue.1, pp.136-142, 2005.
DOI : 10.3139/217.910279

A. Ficarella, M. Milanese, and D. Laforgia, Numerical study of the extrusion process in cereals production: Part I. Fluid-dynamic analysis of the extrusion system, Journal of Food Engineering, vol.73, issue.2, pp.103-111, 2006.
DOI : 10.1016/j.jfoodeng.2004.11.034

A. Ficarella, M. Milanese, and D. Laforgia, Numerical study of the extrusion process in cereals production: Part II. Analysis of variance, Journal of Food Engineering, vol.72, issue.2, pp.179-188, 2006.
DOI : 10.1016/j.jfoodeng.2004.11.035

S. A. Jaffer, V. L. Bravo, P. E. Wood, A. N. Hrymak, and J. D. Wright, Experimental validation of numerical simulations of the kneading disc section in a twin screw extruder, Polymer Engineering & Science, vol.19, issue.4, pp.892-901, 2000.
DOI : 10.3139/217.940108

H. Potente and J. Flecke, Analysis and Modeling of the Residence Time Distribution in Intermeshing Co-rotating Twin Screw Extruders Based on Finite Element Simulations, Journal of Reinforced Plastics and Composites, vol.33, issue.15, pp.17-1047, 1998.
DOI : 10.3139/217.950111

M. A. Huneault, Residence time distribution, mixing and pumping in co-rotating twin screw extruders, Soc Plast Eng, pp.165-187, 1997.

R. Chella, Laminar Mixing in Miscible Fluids In Mixing and Compounding of polymers: Theory and Practice, Manas-Zloczower, I, pp.1-40, 1994.

J. M. Ottino, W. E. Ranz, and C. W. Macosko, A framework for description of mechanical mixing of fluids, AIChE Journal, vol.27, issue.4, pp.565-577, 1981.
DOI : 10.1002/aic.690270406

J. M. Ottino and R. Chella, Laminar mixing of polymeric liquids; a brief review and recent theoretical developments, Polymer Engineering and Science, vol.19, issue.7, pp.357-379, 1983.
DOI : 10.1111/j.1537-2995.1963.tb04619.x

R. Chella and J. M. Ottino, Fluid mechanics of mixing in a single-screw extruder, Industrial & Engineering Chemistry Fundamentals, vol.24, issue.2, pp.170-180, 1985.
DOI : 10.1021/i100018a006

J. M. Ottino, The kinematics of mixing: Stretching, chaos and transport

T. Avalosse and M. J. Crochet, Finite-element simulation of mixing, pp.1-113

T. Avalosse and M. J. Crochet, Finite-element simulation of mixing: 2. Three-dimensional flow through a kenics mixer, AIChE Journal, vol.43, issue.3, pp.588-597, 1997.
DOI : 10.1002/aic.690430304

X. M. Zhang, Z. B. Xu, L. F. Feng, X. B. Song, and G. H. Hu, Assessing local residence time distributions in screw extruders through a new in-line measurement instrument, Polymer Engineering & Science, vol.43, issue.4, pp.510-519, 2006.
DOI : 10.3139/217.1842

URL : https://hal.archives-ouvertes.fr/hal-00281188

X. M. Zhang, L. F. Feng, S. Hoppe, and G. H. Hu, Local residence time, residence revolution, and residence volume distributions in twin-screw extruders, Polymer Engineering & Science, vol.43, issue.1, pp.19-28, 2008.
DOI : 10.3139/217.1664

L. Chen and G. H. Hu, Applications of a statistical theory in residence time distributions, AIChE Journal, vol.2, issue.9, pp.1558-1562, 1993.
DOI : 10.1016/0009-2509(53)80001-1

L. Chen, Z. Pan, and G. H. Hu, Residence time distribution in screw extruders, AIChE Journal, vol.8, issue.9, pp.1455-1464, 1993.
DOI : 10.1016/0260-8774(88)90058-1

L. Chen, G. H. Hu, and J. Lindt, Residence time distribution in non-intermeshing counter-rotating twin-screw extruders, Polymer Engineering and Science, vol.25, issue.7, pp.35-598, 1995.
DOI : 10.1002/pen.760350706

R. Erdmenger and . Zur-entwicklung-von-schneckenverdampfern, Zur Entwicklung von Schneckenverdampfern, Chemie Ingenieur Technik - CIT, vol.34, issue.11, pp.751-754, 1962.
DOI : 10.1002/cite.330341107

R. Erdmenger, Mehrwellen-Schnecken in der Verfahrenstechnik, Chemie Ingenieur Technik - CIT, vol.36, issue.3, pp.175-185, 1964.
DOI : 10.1002/cite.330360303

P. Andersen, Co-rotating intermeshing twin screw extruder: Berstorff's system. In Plastics compounding: equipment and processing, pp.77-136, 1998.