Y. Kim, Intermetallic alloys based on gamma titanium aluminide, JOM, vol.21, issue.4, pp.24-30, 1989.
DOI : 10.1016/B978-0-08-006564-9.50071-3

Y. Kim and D. M. Dimiduk, Progress in the understanding of gamma titanium aluminides, JOM, vol.14, issue.1, pp.40-47, 1991.
DOI : 10.1016/B978-0-08-006564-9.50071-3

]. J. Bibliographie and . Murray, Binary Alloy Phase diagrams, T.B. Massalski Edition, vol.2, issue.1, 1986.

C. Mccullough, J. Valencia, C. Levi, and R. Mehrabian, Phase equilibria and solidification in Ti-Al alloys, Acta Metallurgica, vol.37, issue.5, pp.1321-1336, 1989.
DOI : 10.1016/0001-6160(89)90162-4

U. Kattner, J. Lin, and Y. Chang, Thermodynamic Assessment and Calculation of the Ti-Al System, Metallurgical Transactions A, vol.26, issue.(1), pp.2081-2090, 1992.
DOI : 10.1016/0956-716X(90)90067-Q

R. Kainuma, M. Palm, and G. Inden, Solid-phase equilibria in the Ti-rich part of the Ti???Al system, Intermetallics, vol.2, issue.4, pp.321-332, 1994.
DOI : 10.1016/0966-9795(94)90018-3

I. Ohnuma, Y. Fujita, H. Mitsui, K. Ishikawa, R. Kainuma et al., Phase equilibria in the Ti???Al binary system, Acta Materialia, vol.48, issue.12, pp.3113-3123, 2000.
DOI : 10.1016/S1359-6454(00)00118-X

S. Huang, Structural Intermetallics, R. Darolia et coll, 1993.

F. Zhang, S. Chen, Y. Chang, and U. Kattner, A thermodynamic description of the Ti???Al system, Intermetallics, vol.5, issue.6, pp.471-482, 1997.
DOI : 10.1016/S0966-9795(97)00030-7

D. Veeraraghavan, U. Pilchowski, B. Natarajan, and V. K. Vasudevan, Phase equilibria and transformations in Ti???(25???52) at.% Al alloys studied by electrical resistivity measurements, Acta Materialia, vol.46, issue.2, pp.405-421, 1998.
DOI : 10.1016/S1359-6454(97)00274-7

R. Kainuma, Y. Fujita, H. Mitsui, I. Ohnuma, and K. Ishida, Phase equilibria among ?? (hcp), ?? (bcc) and ?? (L10) phases in Ti???Al base ternary alloys, Intermetallics, vol.8, issue.8, pp.855-867, 2000.
DOI : 10.1016/S0966-9795(00)00015-7

J. Schuster and M. Palm, Reassessment of the binary Aluminum-Titanium phase diagram, Journal of Phase Equilibria and Diffusion, vol.26, issue.2, pp.255-277, 2006.
DOI : 10.1007/s11669-005-0137-x

A. Menand, A. Huguet, and A. , Interstitial solubility in ?? and ??2 phases of TiAl-based alloys, Acta Materialia, vol.44, issue.12, pp.4729-4737, 1996.
DOI : 10.1016/S1359-6454(96)00111-5

E. Menon, A. Fox, and R. Mahapatra, Accurate determination of the lattice parameters of ?-TiAl alloys, Journal of Materials Science Letters, vol.194, issue.14, pp.1231-1233, 1996.
DOI : 10.1007/BF00274384

I. Jung, M. Kim, J. Lee, M. Oh, and D. Wee, High temperature phase equilibria near Ti???50 at% Al composition in Ti???Al system studied by directional solidification, Intermetallics, vol.7, issue.11, pp.1247-1253, 1999.
DOI : 10.1016/S0966-9795(99)00031-X

A. Denquin, Etude des transformation de phase et approche du comportement mécanique des alliages biphasés à base de TiAl : Une contribution au développement de nouveaux alliages intermétalliques, 1994.

J. Y. Jung, J. K. Park, and C. H. Chun, Influence of Al content on cast microstructures of Ti???Al intermetallic compounds, Intermetallics, vol.7, issue.9, pp.1033-1041, 1999.
DOI : 10.1016/S0966-9795(99)00011-4

B. Chalmers, Principles of Solidification, 1964.
DOI : 10.1007/978-1-4684-1854-5_5

M. Kim, M. Oh, J. Lee, H. Inui, M. Yamaguchi et al., Composition and growth rate effects in directionally solidified TiAl alloys, Materials Science and Engineering: A, vol.239, issue.240, pp.570-576, 2006.
DOI : 10.1016/S0921-5093(97)00632-1

D. Veeraraghavan, P. Wang, and V. K. Vasudevan, Kinetics and thermodynamics of the ???????m massive transformation in a Ti???47.5 at.% Al alloy, Acta Materialia, vol.47, issue.11, pp.3313-3330, 1999.
DOI : 10.1016/S1359-6454(99)00195-0

X. D. Zhang, S. Godfrey, M. Weaver, M. Strangwood, P. Threadgill et al., The massive transformation in Ti???Al alloys: Mechanistic observations, Acta Materialia, vol.44, issue.9, pp.3723-3734, 1996.
DOI : 10.1016/1359-6454(95)00453-X

M. J. Blackburn, The Science, Technology and Applications of Titanium, vol.3, issue.633, 1970.
URL : https://hal.archives-ouvertes.fr/hal-01328650

J. Yang, J. N. Wang, Q. Xia, and Y. Wang, Effect of cooling rate on the grain refinement of TiAl-based alloys by rapid heat treatment, Materials Letters, vol.46, issue.4, pp.193-197, 2000.
DOI : 10.1016/S0167-577X(00)00167-1

J. N. Wang, J. Yang, Q. Xia, and Y. Wang, On the grain size refinement of TiAl alloys by cyclic heat treatment, Materials Science and Engineering: A, vol.329, issue.331, pp.331-118, 2002.
DOI : 10.1016/S0921-5093(01)01543-X

S. Huang and J. Chessnutt, Intermetallics Compounds : Principles and Practice, j.h. westbrook et r.l. fleisher Edition, 1995.

Y. Kim, Intermetallic alloys based on gamma titanium aluminide, JOM, vol.21, issue.4, pp.24-30, 1989.
DOI : 10.1016/B978-0-08-006564-9.50071-3

D. Johnson, K. Chihara, H. Inui, and M. Yamaguchi, Microstructural control of TiAl???Mo???B alloys by directional solidification, Acta Materialia, vol.46, issue.18, pp.6529-6540, 1998.
DOI : 10.1016/S1359-6454(98)00310-3

D. R. Johnson, H. Inui, S. Muto, Y. Omiya, and T. Yamanaka, Microstructural development during directional solidification of ??-seeded TiAl alloys, Acta Materialia, vol.54, issue.4, pp.1077-1085, 2006.
DOI : 10.1016/j.actamat.2005.10.040

D. R. Johnson, H. Inui, and M. Yamaguchi, Directional solidification and microstructural control of the TiAlTi3Al lamellar microstructure in TiAl???Si alloys, Acta Materialia, vol.44, issue.6, pp.2523-2535, 1996.
DOI : 10.1016/1359-6454(95)00338-X

S. Muto, T. Yamanaka, L. Ho-nyun, D. R. Johnson, H. Inui et al., Directional Solidification of TiAl-based Alloys and Properties of Directionally Solidified Ingots, Advanced Engineering Materials, vol.3, issue.6, pp.391-394, 2001.
DOI : 10.1002/1527-2648(200106)3:6<391::AID-ADEM391>3.0.CO;2-Q

S. Muto, T. Yamanaka, D. R. Johnson, H. Inui, and M. Yamaguchi, Effects of refractory metals on microstructure and mechanical properties of directionally-solidified TiAl alloys, Materials Science and Engineering: A, vol.329, issue.331, pp.329-331, 2002.
DOI : 10.1016/S0921-5093(01)01616-1

Y. Kim and D. M. Dimiduk, Progress in the understanding of gamma titanium aluminides, JOM, vol.14, issue.1, pp.40-47, 1991.
DOI : 10.1016/B978-0-08-006564-9.50071-3

F. Perdrix, M. Trichet, J. Bonnentien, M. Cornet, and J. Bigot, Relationships between interstitial content, microstructure and mechanical properties in fully lamellar Ti???48Al alloys, with special reference to carbon, Intermetallics, vol.9, issue.9, pp.807-815, 2001.
DOI : 10.1016/S0966-9795(01)00066-8

R. Yu, L. L. He, Z. Y. Cheng, J. Zhu, and H. Q. Ye, B2 precipitates and distribution of W in a Ti???47Al???2W???0.5Si alloy, Intermetallics, vol.10, issue.7, pp.661-665, 2002.
DOI : 10.1016/S0966-9795(02)00043-2

X. Du, J. Zhu, X. Zhang, Z. Cheng, and Y. Kim, Creep induced ??2?????2phase transformation in a fully-lamellar TiAl alloy, Scripta Materialia, vol.43, issue.7, pp.597-602, 2000.
DOI : 10.1016/S1359-6462(00)00443-7

G. E. Fuchs, Effect of W additions to Ti-48Al-2Nb-2Cr alloys, Materials Science and Engineering: A, vol.192, issue.193, pp.707-715, 1995.
DOI : 10.1016/0921-5093(94)03291-2

G. Shao and P. Tsakiropoulos, Solidification structures of Ti???Al???Cr alloys, Intermetallics, vol.7, issue.5, pp.579-587, 1999.
DOI : 10.1016/S0966-9795(98)00067-3

S. C. Huang, E. L. Hall, and D. S. Shih, Microstructure and Ductility of TiAl Alloys Modified by Cr Addition., ISIJ International, vol.31, issue.10, pp.31-1100, 1991.
DOI : 10.2355/isijinternational.31.1100

S. Naka, Advanced titanium-based alloys, Current Opinion in Solid State and Materials Science, vol.1, issue.3, pp.333-339, 1996.
DOI : 10.1016/S1359-0286(96)80022-2

E. A. Ott and T. M. Pollock, Microstructural development and creep deformation in equiaxed ?, ? + ? 2 , and ? + ? 2 + B2 titanium aluminides, Metall. Mater. Trans, pp.29-32, 1998.

J. G. Wang and T. G. Nieh, Creep of a beta phase-containing TiAl alloy, Intermetallics, vol.8, issue.7, pp.737-748, 2000.
DOI : 10.1016/S0966-9795(00)00009-1

W. Lefebvre, Etude des transformation de phase de L'alliage T i 52 Al 48 : role de l'oxygène, 2001.

F. Perdrix, Effet de la vitesse de refroidissement sur les propriétés mécaniques des aluminiures de titane à structure lamellaire : influence de l'oxygène, de l'azote et du carbone, 2000.

J. Barbosa, O. M. Teodoro, A. M. Moutinho, S. Ribeiro, and C. Monteiro, Characterization of TiAl Alloys by Secondary Ion Mass Spectrometry, Materials Science Forum, vol.455, issue.456, pp.455-456, 2004.
DOI : 10.4028/www.scientific.net/MSF.455-456.653

O. M. Teodoro, J. Barbosa, M. D. Naia, and A. M. Moutinho, Effect of low level contamination on TiAl alloys studied by SIMS, Applied Surface Science, vol.231, issue.232, pp.231-232, 2004.
DOI : 10.1016/j.apsusc.2004.03.142

J. Barbosa, C. S. Ribeiro, O. M. Teodoro, and C. Monteiro, Evaluation of Y 2 O 3 as front layer of ceramic crucibles for vacuum induction melting of TiAl based alloys, 2005.

J. Barbosa, H. Puga, C. S. Ribeiro, O. M. Teodoro, and A. C. Monteiro, -TiAl, International Journal of Cast Metals Research, vol.4, issue.4, pp.331-338, 2006.
DOI : 10.1007/BF02667869

M. Charpentier, Hétérogénéités héritées de la solidification et formation des microstructures dans l'alliage Ti-48Al-2Cr-2Nb, 2003.

J. Lapin, L. Ondrus, and M. Nazmy, Directional solidification of intermetallic Ti???46Al???2W???0.5Si alloy in alumina moulds, Intermetallics, vol.10, issue.10, pp.1019-1031, 2002.
DOI : 10.1016/S0966-9795(02)00119-X

J. Lapin, L. Ondrus, and O. Bajana, Effect of Al2O3 particles on mechanical properties of directionally solidified intermetallic Ti???46Al???2W???0.5Si alloy, Materials Science and Engineering: A, vol.360, issue.1-2, pp.85-95, 2003.
DOI : 10.1016/S0921-5093(03)00445-3

H. J. Seifert, A. Kussmaul, and F. Aldinger, Phase equilibria and diffusion paths in the Ti???Al???O???N system, Journal of Alloys and Compounds, vol.317, issue.318, pp.317-318, 2001.
DOI : 10.1016/S0925-8388(00)01409-2

M. X. Zhang, K. C. Hsieh, J. Dekock, and Y. A. Chang, Phase diagram of Ti-Al-O at 1100 ? C, Scripta Metall, Mater, vol.27, issue.10, pp.1361-1366, 1992.

P. Waldner and G. Eriksson, Thermodynamic modelling of the system titanium-oxygen, Calphad, vol.23, issue.2, pp.189-218, 1999.
DOI : 10.1016/S0364-5916(99)00025-5

G. P. Kelkar and A. H. Carim, Phase Equilibria in the Ti-AI-O System at 945oC and Analysis of Ti/Al2O3 Reactions, Journal of the American Ceramic Society, vol.107, issue.6, pp.572-576, 1995.
DOI : 10.1016/0079-6786(90)90007-3

Y. Chen, D. J. Young, and B. Gleeson, A new Ti-rich ternary phase in the Ti-Al-O system, Materials Letters, vol.22, issue.3-4, pp.3-4, 1995.
DOI : 10.1016/0167-577X(94)00242-8

B. J. Lee and N. Saunders, Thermodynamic evaluation of the Ti-Al-O ternary system, Z. Metallkd. Int. J. Mater. Res. Adv. Tech, vol.88, issue.2, pp.152-161, 1997.

A. Denquin, S. Naka, A. Huguet, and A. Menand, Atom-probe investigation of the partitioning of interstitial elements in two-phases ? + ? 2 TiAl-based alloys, Scripta Metall, Mater, vol.28, issue.9, pp.1131-1136, 1993.

W. Lefebvre, A. Loiseau, and A. Menand, Influence of oxygen on phase transformations in a Ti-48 At, Metall. Mater. Trans, pp.34-44, 2003.

W. Kurz and D. Fisher, Fundamentals of Solidification, 1998.

T. W. Clyne and W. Kurz, Solute redistribution during solidification with rapid solid state diffusion, Metallurgical Transactions A, vol.100, issue.6, pp.965-971, 1981.
DOI : 10.1007/BF02644078

Y. Su, C. Liu, X. Li, J. Guo, B. Li et al., Microstructure selection during the directionally peritectic solidification of Ti???Al binary system, Intermetallics, vol.13, issue.3-4, pp.267-274, 2005.
DOI : 10.1016/j.intermet.2004.07.010

P. Busse and F. Meissen, Coupled growth of the properitectic ??- and the peritectic ??-phases in binary titanium aluminides, Scripta Materialia, vol.36, issue.6, pp.653-658, 1997.
DOI : 10.1016/S1359-6462(96)00438-1

H. W. Kerr and W. Kurz, Solidification of peritectic alloys, International Materials Reviews, vol.92, issue.2, pp.129-164, 1996.
DOI : 10.1016/0022-0248(93)90062-2

H. Fredriksson and G. Nylén, Mechanism of peritectic reactions and transformations, Metal Science, vol.1, issue.6, pp.283-294, 1982.
DOI : 10.1179/msc.1976.10.9.298

J. Pouchou and F. Pichoir, Un nouveau modèle de calcul pour la microanalyse quantitative par spectrométrie de rayons X -partie II : application à l'analyse d'échantillons hétérogènes en profondeur, La recherche aérospatiale, vol.5, pp.349-367, 1984.

S. Reed, Electron Microprobe Analysis, M.V. Nathal et coll. Edition, 1997.

J. D. Geller and P. D. Engle, Sample preparation for electron probe microanalysis - Pushing the limits, Journal of Research of the National Institute of Standards and Technology, vol.107, issue.6, pp.627-638, 2002.
DOI : 10.6028/jres.107.051

W. J. Boettinger and U. R. Kattner, On differential thermal analyzer curves for the melting and freezing of alloys, Metallurgical and Materials Transactions A, vol.24, issue.222, pp.1779-1794, 2002.
DOI : 10.1007/BF02659502

R. Shull, Thermal Analysis in Metallurgy, 1992.

J. Perepezko, Thermal Analysis in Metallurgy, 1992.

N. Saunders, TiAlDATA, a thermodynamic database for calculation of phase equilibria in multi-component TiAl-based alloys, Tech. rep., Thermotech Ltd, 1997.

R. Siegel and J. Howell, Thermal Radiation Heat Transfert, 1981.

H. Watanabe, M. Susa, and K. Nagata, Discontinuity in normal spectral emissivity of solid and liquid copper at the melting point, Metallurgical and Materials Transactions A, vol.25, issue.6, pp.2507-2513, 1997.
DOI : 10.2355/isijinternational.37.399

C. Cagran, B. Wilthan, G. Pottlacher, B. Roebuck, M. Wickins et al., Thermophysical properties of a Ti???44%Al???8%Nb???1%B alloy in the solid and molten states, -12 Spec, pp.1327-1334, 2003.
DOI : 10.1016/S0966-9795(03)00175-4

. Bibliographie, Palm, Reassessment of the binary aluminum-titanium phase diagram, J. P. E. D, vol.27, issue.3, pp.255-277, 2006.

M. Charpentier, Hétérogénéités héritées de la solidification et formation des microstructures dans l'alliage Ti-48Al-2Cr-2Nb, 2003.

J. Lapin, L. Ondrus, and M. Nazmy, Directional solidification of intermetallic Ti???46Al???2W???0.5Si alloy in alumina moulds, Intermetallics, vol.10, issue.10, pp.1019-1031, 2002.
DOI : 10.1016/S0966-9795(02)00119-X

M. Ganesan, D. Dye, and P. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, vol.373, issue.8, pp.36-44, 2005.
DOI : 10.1016/j.msea.2004.01.030

E. Scheil, Bemerkungen zur schichtkristallbildung, Z. Metallkd, pp.34-70, 1942.

N. Saunders, TiAlDATA, a thermodynamic database for calculation of phase equilibria in multi-component TiAl-based alloys, Tech. rep., Thermotech Ltd, 1997.

D. Lee and S. Woo, High temperature oxidation of Ti???47%Al???1.7%W???3.7%Zr alloys, Intermetallics, vol.13, issue.2, pp.169-177, 2005.
DOI : 10.1016/j.intermet.2004.07.043

O. M. Teodoro, J. Barbosa, M. D. Naia, and A. M. Moutinho, Effect of low level contamination on TiAl alloys studied by SIMS, Applied Surface Science, vol.231, issue.232, pp.231-232, 2004.
DOI : 10.1016/j.apsusc.2004.03.142

J. Barbosa, H. Puga, C. S. Ribeiro, O. M. Teodoro, and A. C. Monteiro, -TiAl, International Journal of Cast Metals Research, vol.4, issue.4, pp.331-338, 2006.
DOI : 10.1007/BF02667869

M. Kim, M. Oh, J. Lee, H. Inui, M. Yamaguchi et al., Composition and growth rate effects in directionally solidified TiAl alloys, Materials Science and Engineering: A, vol.239, issue.240, pp.570-576, 2006.
DOI : 10.1016/S0921-5093(97)00632-1

D. Johnson, K. Chihara, H. Inui, and M. Yamaguchi, Microstructural control of TiAl???Mo???B alloys by directional solidification, Acta Materialia, vol.46, issue.18, pp.6529-6540, 1998.
DOI : 10.1016/S1359-6454(98)00310-3

R. Sharp and M. Flemmings, Solute redistribution in cellular solidification, Metallurgical Transactions, vol.3, issue.4, pp.823-830, 1974.
DOI : 10.1007/BF02643134

W. Kurz and D. Fisher, Fundamentals of Solidification, 1998.

P. Waldner and G. Eriksson, Thermodynamic modelling of the system titanium-oxygen, Calphad, vol.23, issue.2, pp.189-218, 1999.
DOI : 10.1016/S0364-5916(99)00025-5

S. Muto, T. Yamanaka, L. Ho-nyun, D. R. Johnson, H. Inui et al., Directional Solidification of TiAl-based Alloys and Properties of Directionally Solidified Ingots, Advanced Engineering Materials, vol.3, issue.6, pp.391-394, 2001.
DOI : 10.1002/1527-2648(200106)3:6<391::AID-ADEM391>3.0.CO;2-Q

S. Muto, T. Yamanaka, D. R. Johnson, H. Inui, and M. Yamaguchi, Effects of refractory metals on microstructure and mechanical properties of directionally-solidified TiAl alloys, Materials Science and Engineering: A, vol.329, issue.331, pp.329-331, 2002.
DOI : 10.1016/S0921-5093(01)01616-1

M. S. Blanter, E. B. Granovskiy, and L. B. Magalas, Interaction of dissolved atoms and relaxation due to interstitial atoms in hcp metals, Materials Science and Engineering: A, vol.370, issue.1-2, pp.88-92, 2004.
DOI : 10.1016/j.msea.2003.08.078

.. Chemins-de-solidification, 102 IV.4.4 Formation d'oxydes pendant l'élaboration

. Bibliographie, Miura, Effects of Nb addition on oxidation behavior of TiAl, Intermetallics, vol.3, issue.5, pp.357-363, 1995.

Y. Jin, J. N. Wang, J. Yang, and Y. Wang, Microstructure refinement of cast TiAl alloys by ?? solidification, Scripta Materialia, vol.51, issue.2, pp.113-117, 2004.
DOI : 10.1016/j.scriptamat.2004.03.044

N. Saunders, TiAlDATA, a thermodynamic database for calculation of phase equilibria in multi-component TiAl-based alloys, Tech. rep., Thermotech Ltd, 1997.

G. L. Chen, X. J. Xu, Z. K. Teng, Y. L. Wang, and J. P. Lin, Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale, Intermetallics, vol.15, issue.5-6, pp.5-6, 2007.
DOI : 10.1016/j.intermet.2006.10.003

R. Wunderlich, Report on Thermophysical Property Data of Ti-Al-Nb Alloy, Tech. rep., DLR, NPL, 2007.

M. Charpentier, Hétérogénéités héritées de la solidification et formation des microstructures dans l'alliage Ti-48Al-2Cr-2Nb, 2003.

M. Kim, M. Oh, J. Lee, H. Inui, M. Yamaguchi et al., Composition and growth rate effects in directionally solidified TiAl alloys, Materials Science and Engineering: A, vol.239, issue.240, pp.570-576, 2006.
DOI : 10.1016/S0921-5093(97)00632-1

W. Kurz and D. Fisher, Fundamentals of Solidification, 1998.

C. Mccullough, J. Valencia, C. Levi, and R. Mehrabian, Phase equilibria and solidification in Ti-Al alloys, Acta Metallurgica, vol.37, issue.5, pp.1321-1336, 1989.
DOI : 10.1016/0001-6160(89)90162-4

M. Ganesan, D. Dye, and P. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, vol.373, issue.8, pp.36-44, 2005.
DOI : 10.1016/j.msea.2004.01.030

M. Charpentier, D. Daloz, A. Hazotte, E. Gautier, G. Lesoult et al., Study of microstructure and solute partitioning in a cast Ti-48Al-2Cr-2Nb alloy by quenching during directional solidification technique, Metallurgical and Materials Transactions A, vol.34, issue.1, pp.34-2139, 2003.
DOI : 10.1007/BF02801187

URL : https://hal.archives-ouvertes.fr/hal-00161967

J. Lapin, L. Ondrus, and M. Nazmy, Directional solidification of intermetallic Ti???46Al???2W???0.5Si alloy in alumina moulds, Intermetallics, vol.10, issue.10, pp.1019-1031, 2002.
DOI : 10.1016/S0966-9795(02)00119-X

J. Murray, Binary Alloy Phase diagrams, T.B. Massalski Edition, vol.2, 1986.

Y. Hao, D. Xu, Y. Cui, R. Yang, and D. Li, The site occupancies of alloying elements in TiAl and Ti3Al alloys, Acta Materialia, vol.47, issue.4, pp.1129-1139, 1999.
DOI : 10.1016/S1359-6454(99)00006-3

E. Scheil, Bemerkungen zur schichtkristallbildung, Z. Metallkd, pp.34-70, 1942.

M. S. Blanter, E. B. Granovskiy, and L. B. Magalas, Interaction of dissolved atoms and relaxation due to interstitial atoms in hcp metals, Materials Science and Engineering: A, vol.370, issue.1-2, pp.88-92, 2004.
DOI : 10.1016/j.msea.2003.08.078

T. W. Clyne and W. Kurz, Solute redistribution during solidification with rapid solid state diffusion, Metallurgical Transactions A, vol.100, issue.6, pp.965-971, 1981.
DOI : 10.1007/BF02644078

Y. Mishin and C. Herzig, Diffusion in the Ti???Al system, Acta Materialia, vol.48, issue.3, pp.589-623, 2000.
DOI : 10.1016/S1359-6454(99)00400-0

A. Pontau and L. D. , Diffusion of titanium and niobium in bcc Ti-Nb alloys, Physical Review B, vol.4, issue.8, pp.4027-4037, 1979.
DOI : 10.1080/14786435908238259

J. Schuster and M. Palm, Reassessment of the binary Aluminum-Titanium phase diagram, Journal of Phase Equilibria and Diffusion, vol.26, issue.2, pp.255-277, 2006.
DOI : 10.1007/s11669-005-0137-x

D. R. Johnson, H. Inui, S. Muto, Y. Omiya, and T. Yamanaka, Microstructural development during directional solidification of ??-seeded TiAl alloys, Acta Materialia, vol.54, issue.4, pp.1077-1085, 2006.
DOI : 10.1016/j.actamat.2005.10.040

A. Nérac-partaix and A. Menand, Atom probe analysis of oxygen in ternary TiAl alloys, Scripta Materialia, vol.35, issue.2, pp.199-203, 1996.
DOI : 10.1016/1359-6462(96)00125-X

. Enfin, il serait intéressant d'étudier les effets de l'inoculation, mais aussi de rechercher de nouveaux inoculants En effet, la faible ductilité de ces matériaux rend nécessaire la recherche d'inoculants qui ne seraient pas néfastes aux propriétés, en étant à l'origine de départ de fissure notamment . Enfin pour reprendre l'un des thèmes importants de ce manuscrit, l'influence de l'inoculation sur la microségrégation

P. Waldner and G. Eriksson, Thermodynamic modelling of the system titanium-oxygen, Calphad, vol.23, issue.2, pp.189-218, 1999.
DOI : 10.1016/S0364-5916(99)00025-5

N. Saunders, TiAlDATA, a thermodynamic database for calculation of phase equilibria in multi-component TiAl-based alloys, Tech. rep., Thermotech Ltd, 1997.

M. Rappaz and W. Boettinger, On dendritic solidification of multicomponent alloys with unequal liquid diffusion coefficients, Acta Materialia, vol.47, issue.11, pp.3205-3219, 1999.
DOI : 10.1016/S1359-6454(99)00188-3

W. Kurz and D. Fisher, Fundamentals of Solidification, 1998.

T. W. Clyne and W. Kurz, Solute redistribution during solidification with rapid solid state diffusion, Metallurgical Transactions A, vol.100, issue.6, pp.965-971, 1981.
DOI : 10.1007/BF02644078

P. Potts, A Handbook of Silicate Rock Analysis, 1987.

K. Kanaya and S. Okayama, Penetration and energy-loss theory of electrons in solid targets, Journal of Physics D: Applied Physics, vol.5, issue.1, p.43, 1972.
DOI : 10.1088/0022-3727/5/1/308

K. Heinrich, Electron Beam X-ray Microanalysis, 1981.

J. Wittke, Glg 510 -electron probe micro analysis course overview, 2006.

J. Pouchou and F. Pichoir, ?(?z) procedure for improved quantitative microanalysis, Microbeam Analysis, pp.104-106, 1985.

J. D. Geller and P. D. Engle, Sample preparation for electron probe microanalysis - Pushing the limits, Journal of Research of the National Institute of Standards and Technology, vol.107, issue.6, pp.627-638, 2002.
DOI : 10.6028/jres.107.051

T. Shiraiwa and K. Fujino, Quantitative analyis of oxygen in electron probe microanalysis, th International Conference on X-Ray Optics and Microsanalysis, pp.365-368, 1968.

J. Reed, Electron Microprobe Analysis, 1997.

M. N. Gungor, A statistically significant experimental technique for investigating microsegregation in cast alloys, Metallurgical Transactions A, vol.221, issue.12, pp.2529-2533, 1989.
DOI : 10.1007/BF02645003

A. Hazotte, J. Lecomte, and J. Lacaze, Setting-up rules to characterize microsegregation, Materials Science and Engineering: A, vol.413, issue.414, pp.413-414, 2005.
DOI : 10.1016/j.msea.2005.09.046

URL : https://hal.archives-ouvertes.fr/hal-00111895

M. Ganesan, D. Dye, and P. Lee, A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings, Metallurgical and Materials Transactions A, vol.373, issue.8, pp.36-44, 2005.
DOI : 10.1016/j.msea.2004.01.030

M. Flemings, D. Poirier, R. Barone, and H. Brody, Microsegregation in iron-base alloys, Journal of the Iron Steel Institute, vol.208, pp.371-381, 1970.

M. Charpentier, D. Daloz, A. Hazotte, E. Gautier, G. Lesoult et al., Study of microstructure and solute partitioning in a cast Ti-48Al-2Cr-2Nb alloy by quenching during directional solidification technique, Metallurgical and Materials Transactions A, vol.34, issue.1, pp.34-2139, 2003.
DOI : 10.1007/BF02801187

URL : https://hal.archives-ouvertes.fr/hal-00161967

M. S. Karunaratne, D. C. Cox, P. Carter, and R. C. Reed, Modelling of the Microsegregation in CMSX-4 Superalloy and its Homogenisation During Heat Treatment, Superalloys 2000 (Ninth International Symposium), pp.263-272, 2000.
DOI : 10.7449/2000/Superalloys_2000_263_272