H. Abdolvand and M. R. Et-daymond, Internal strain and texture development during twinning: Comparing neutron diffraction measurements with crystal plasticity finite-element approaches, Acta Materialia, vol.60, issue.5, pp.2240-2248, 2012.
DOI : 10.1016/j.actamat.2012.01.016

A. Akhtar, Prismatic slip in ??-titanium single crystals, Metallurgical Transactions A, vol.16, issue.12, pp.2201-2208, 1975.
DOI : 10.1016/0001-6160(68)90114-4

A. Akhtar, Pyramidal slip in cobalt, Scripta Metallurgica, vol.10, issue.4, pp.365-366, 1976.
DOI : 10.1016/0036-9748(76)90093-4

F. Aldinger, Flow and Fracture of Single Crystals, Beryllium Science and Technology, pp.7-107, 1979.
DOI : 10.1007/978-1-4684-3429-3_2

K. E. Amouzou, T. Richeton, A. Roth, M. A. Lebyodkin, and T. A. Et-lebedkina, Micromechanical modeling of hardening mechanisms in commercially pure ?? -titanium in tensile condition, International Journal of Plasticity, vol.80, 2015.
DOI : 10.1016/j.ijplas.2015.09.008

URL : https://hal.archives-ouvertes.fr/hal-01514731

L. Anand and S. R. Et-kalindindi, The process of shear band formation in plane strain compression of fcc metals: Effects of crystallographic texture, Mechanics of Materials, vol.17, issue.2-3, pp.223-243, 1994.
DOI : 10.1016/0167-6636(94)90062-0

M. Arulkumar, A. K. Kanjarla, S. R. Niezgoda, R. A. Lebensohn, and C. N. Et-tomé, Numerical study of the stress state of a deformation twin in magnesium, Acta Materialia, vol.84, pp.349-358, 2015.
DOI : 10.1016/j.actamat.2014.10.048

R. J. Asaro and A. Et-needleman, Overview no. 42 Texture development and strain hardening in rate dependent polycrystals, Acta Metallurgica, vol.33, issue.6, pp.923-953, 1985.
DOI : 10.1016/0001-6160(85)90188-9

A. Alizamini, H. Militzer, M. Et-poole, and W. J. , A novel technique for developing bimodal grain size distributions in low carbon steels, Scripta Materialia, vol.57, issue.12, pp.1065-1068, 2007.
DOI : 10.1016/j.scriptamat.2007.08.035

F. Bachmann, R. Hielscher, and H. Et-schaeben, Texture analysis with mtex -free and open source software toolbox. Solid State Phenomena, pp.63-68, 2010.

P. Bak, C. Tang, and K. Et-wiesenfeld, Self-organized criticality, Physical Review A, vol.58, issue.1, pp.364-374, 1988.
DOI : 10.1103/PhysRevLett.58.1161

F. Barbe, L. Decker, D. Jeulin, and G. Et-cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model, International Journal of Plasticity, vol.17, issue.4, pp.513-536, 2001.
DOI : 10.1016/S0749-6419(00)00061-9

F. Barbe, S. Forest, and G. Et-cailletaud, Intergranular and intragranular behavior of polycrystalline aggregates.Part 2: Results, International Journal of Plasticity, vol.17, issue.4, pp.537-563, 2001.
DOI : 10.1016/S0749-6419(00)00062-0

B. Barkia, ViscoplasticitéViscoplasticitéà l'ambiante du titane en relation avec ses teneurs en oxygène et hydrogène, Thèse de doctorat, ´ Ecole polytechnique, 2015.

B. Barkia, V. Doquet, J. P. Couzinié, I. Guillot, and E. Et-héripré, In situ monitoring of the deformation mechanisms in titanium with different oxygen contents, Materials Science and Engineering: A, vol.636, pp.91-102, 2015.
DOI : 10.1016/j.msea.2015.03.044

URL : https://hal.archives-ouvertes.fr/hal-01227185

B. Barkia, V. Doquet, J. P. Couzinié, and I. Et-guillot, Room-temperature creep and stress relaxation in commercial purity titanium???Influence of the oxygen and hydrogen contents on incubation phenomena and aging-induced rejuvenation of the creep potential, Materials Science and Engineering: A, vol.624, pp.79-89, 2015.
DOI : 10.1016/j.msea.2014.11.073

M. Barnett, N. Standfor, A. Ghaderi, and F. Et-siska, Plastic relaxation of the internal stress induced by twinning, Acta Materialia, vol.61, issue.20, pp.7859-7867, 2013.
DOI : 10.1016/j.actamat.2013.09.024

M. R. Barnett, Z. Keshavarz, A. G. Beer, and D. Et-atwell, Influence of grain size on the compressive deformation of wrought Mg???3Al???1Zn, Acta Materialia, vol.52, issue.17, pp.5093-5103, 2004.
DOI : 10.1016/j.actamat.2004.07.015

Z. S. Basinski, M. S. Szcerba, M. Niewczas, J. D. Embury, and S. J. Et-basinski, The transformation of slip dislocations during twinning of copperaluminum alloy crystals, pp.1037-1043, 1997.

H. Becker and W. Et-pantleon, Work-hardening stages and deformation mechanism maps during tensile deformation of commercially pure titanium, Computational Materials Science, vol.76, pp.52-59, 2013.
DOI : 10.1016/j.commatsci.2013.03.028

N. Benmhenni, S. Bouvier, R. Brenner, T. Chauveau, and B. Et-bacroix, Micromechanical modelling of monotonic loading of CP ??-Ti: Correlation between macroscopic and microscopic behaviour, Materials Science and Engineering: A, vol.573, pp.222-233, 2013.
DOI : 10.1016/j.msea.2013.02.022

S. Berbenni, Elastoviscoplasticité des aciers polycristallins : Modélisation micromécanique et physique, Applications au comportement dynamique etàetà l'effet Bake-Hardening, Thèse de doctorat, ´ Ecole Nationale Supérieure d'Arts et Métiers, 2002.

S. Berbenni and L. Et-capolungo, A mori-tanaka homogenization scheme for non-linear elasto-viscoplastic heterogeneous materials based on translated fields : an affine extension. Comptes Rendus de Mecanique (special issue : Mechanics of granular and polycrystalline solids), pp.95-106, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01513857

S. Berbenni, F. Dinzart, and H. Et-sabar, A new internal variables homogenization scheme for linear viscoelastic materials based on an exact Eshelby interaction law, Mechanics of Materials, vol.81, pp.110-124, 2015.
DOI : 10.1016/j.mechmat.2014.11.003

URL : https://hal.archives-ouvertes.fr/hal-01513855

S. Berbenni, V. Favier, and M. Et-berveiller, Impact of the grain size distribution on the yield stress of heterogeneous materials, International Journal of Plasticity, vol.23, issue.1, pp.114-142, 2007.
DOI : 10.1016/j.ijplas.2006.03.004

URL : https://hal.archives-ouvertes.fr/hal-00128377

S. Berbenni, V. Favier, X. Lemoine, and M. Et-berveiller, Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels having different microstructures, Materials Science and Engineering: A, vol.372, issue.1-2, pp.128-136, 2004.
DOI : 10.1016/j.msea.2003.11.010

URL : https://hal.archives-ouvertes.fr/hal-00128379

N. Bertin, C. N. Tomé, I. Beyerlein, M. R. Barnett, and L. Et-capolungo, On the strength of dislocation interactions and their effect on latent hardening in pure Magnesium, International Journal of Plasticity, vol.62, pp.72-92, 2014.
DOI : 10.1016/j.ijplas.2014.06.010

M. Berveiller and A. Et-zaoui, An extension of the self-consistent scheme to plastically-flowing polycrystals, Journal of the Mechanics and Physics of Solids, vol.26, issue.5-6, pp.325-344, 1979.
DOI : 10.1016/0022-5096(78)90003-0

J. F. Bishop and R. Hill, CXXVIII. A theoretical derivation of the plastic properties of a polycrystalline face-centred metal, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, vol.42, issue.334, pp.414-427, 1951.
DOI : 10.1098/rsta.1932.0009

R. C. Blish and T. Et-vreeland, Dislocation Velocity on the {1??21??2}???12??13??? Slip Systems of Zinc, Journal of Applied Physics, vol.8, issue.2, pp.884-890, 1969.
DOI : 10.1063/1.1656678

O. Bouaziz, S. Allain, and C. Scott, Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels, Scripta Materialia, vol.58, issue.6, pp.484-487, 2008.
DOI : 10.1016/j.scriptamat.2007.10.050

Y. Bougherira, Etude des phénomènes d'auto-organisation des ensembles de dislocations dans un alliage au vieillissement dynamique, Thèse de doctorat, 2011.

L. Brassard, L. Stainier, I. Doghri, and L. Et-delannay, Homogenization of elasto-(visco) plastic composites based on an incremental variational principle, International Journal of Plasticity, vol.36, pp.86-112, 2012.
DOI : 10.1016/j.ijplas.2012.03.010

R. Brenner, R. Masson, O. Castelnau, and A. Et-zaoui, A ???quasi-elastic??? affine formulation for the homogenised behaviour of nonlinear viscoelastic polycrystals and composites, European Journal of Mechanics - A/Solids, vol.21, issue.6, pp.943-960, 2002.
DOI : 10.1016/S0997-7538(02)01247-0

URL : https://hal.archives-ouvertes.fr/hal-00111358

H. Bunge, Texture Analysis in materials science : mathematical methods, 1982.

C. `-aceres, C. H. Blake, and A. H. , On the strain hardening behaviour of magnesium at room temperature, Materials Science and Engineering: A, vol.462, issue.1-2, pp.193-196, 2007.
DOI : 10.1016/j.msea.2005.12.113

O. Castelnau, P. Duval, R. A. Lebensohn, and G. R. Et-canova, Viscoplastic modeling of texture development in polycrystalline ice with a self-consistent approach: Comparison with bound estimates, Journal of Geophysical Research: Solid Earth, vol.16, issue.9, pp.13851-13868, 1996.
DOI : 10.1016/0191-8141(94)90071-X

E. A. Ceausescu-ersen, Application de la technique d'´ emission acoustique ` a la caractérisation de matériaux céramiquescéramiquesévolutifs, 2004.

J. Charrier, ContributionàContributionà l'´ etude des mécanismes de déformation plastique du titane alphá ecroui par traction entre ?140 et 400?, Thèse de doctorat, 1978.

A. Chattopadhyay, L. Bao, J. Lecomte, Y. D. Zhang, C. Schuman et al., Role of glide systems in channel die compression of commercially pure titanium alloy, Materials Science and Technology, vol.28, issue.3, pp.372-376, 2012.
DOI : 10.1016/S0254-0584(03)00068-3

D. R. Chichili, K. T. Ramesh, and K. J. Et-hemker, The high-strain-rate response of alpha-titanium: experiments, deformation mechanisms and modeling, Acta Materialia, vol.46, issue.3, 1998.
DOI : 10.1016/S1359-6454(97)00287-5

J. W. Christian and S. Et-mahajan, Deformation twinning, Progress in Materials Science, vol.39, issue.1-2, pp.1-157, 1995.
DOI : 10.1016/0079-6425(94)00007-7

A. T. Churchman, The Slip Modes of Titanium and the Effect of Purity on their Occurrence during Tensile Deformation of Single Crystals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.226, issue.1165, pp.216-226, 1954.
DOI : 10.1098/rspa.1954.0250

B. Clausen, C. N. Tomé, D. W. Brown, and S. R. Et-agnew, Reorientation and stress relaxation due to twinning: Modeling and experimental characterization for Mg, Acta Materialia, vol.56, issue.11, pp.2456-2468, 2008.
DOI : 10.1016/j.actamat.2008.01.057

A. Clauset, C. R. Shalizi, and M. E. Et-newman, Power-Law Distributions in Empirical Data, SIAM Review, vol.51, issue.4, pp.661-703, 2009.
DOI : 10.1137/070710111

H. Conrad, Effect of interstitial solutes on the strength and ductility of titanium, Progress in Materials Science, vol.26, issue.2-4, pp.123-403, 1981.
DOI : 10.1016/0079-6425(81)90001-3

M. Coulibaly and H. Et-sabar, Micromechanical modeling of linear viscoelastic behavior of heterogeneous materials, Archive of Applied Mechanics, vol.49, issue.EM5, pp.345-359, 2011.
DOI : 10.1115/1.3162609

F. F. Csikor, C. Motz, D. Weygand, M. Zaiser, and S. Et-zapperi, Dislocation Avalanches, Strain Bursts, and the Problem of Plastic Forming at the Micrometer Scale, Science, vol.55, issue.18, pp.251-254, 2007.
DOI : 10.1103/PhysRevLett.89.185503

V. V. Damiano, G. J. London, and H. Conrad, Microstrain compression of beryllium and beryllium alloy single crystals parallel to (0001) slip trace analysis and transmission electron microscopy, Transactions of the Metallurgical Society of AIME, vol.242, pp.987-994, 1968.

S. Dancette, L. Delannay, K. Renard, M. A. Melchior, and P. J. Jacques, Crystal plasticity modeling of texture development and hardening in TWIP steels, Acta Materialia, vol.60, issue.5, pp.2135-2145, 2012.
DOI : 10.1016/j.actamat.2012.01.015

URL : https://hal.archives-ouvertes.fr/hal-01558491

B. Devincre, Dislocation dynamics simulations of slip systems interactions and forest strengthening in ice single crystal, Philosophical Magazine, vol.48, issue.1-3, pp.235-246, 2013.
DOI : 10.1016/S0079-6425(02)00003-8

B. Devincre, T. Hoc, and L. P. Et-kubin, Collinear interactions of dislocations and slip systems, Materials Science and Engineering: A, vol.400, issue.401, pp.400-401182, 2005.
DOI : 10.1016/j.msea.2005.02.071

URL : https://hal.archives-ouvertes.fr/hal-00114946

B. Devincre, L. P. Kubin, and T. Et-hoc, Physical analyses of crystal plasticity by DD simulations, Scripta Materialia, vol.54, issue.5, pp.741-746, 2006.
DOI : 10.1016/j.scriptamat.2005.10.066

URL : https://hal.archives-ouvertes.fr/hal-00019068

. Doitpoms, University of cambridge, 2014.

M. Doner and H. Conrad, Deformation mechanisms in commercial Ti (0.5 at. pct oineq) at intermediate and high temperatures (0.3 - 0.6 tinm), Metallurgical Transactions, vol.21, issue.2A, pp.2809-2817, 1973.
DOI : 10.1080/14786440808520347

C. Déprés, C. F. Robertson, and M. C. Et-fivel, Low-strain fatigue in AISI 316L steel surface grains: a three-dimensional discrete dislocation dynamics modelling of the early cycles I. Dislocation microstructures and mechanical behaviour, Philosophical Magazine, vol.84, issue.22, pp.2257-2275, 2004.
DOI : 10.1088/0965-0393/10/4/306

J. Dunlop, Y. Bréchet, L. Legras, and Y. Et-estrin, Dislocation density-based modelling of plastic deformation of Zircaloy-4, Materials Science and Engineering: A, vol.443, issue.1-2, pp.77-86, 2007.
DOI : 10.1016/j.msea.2006.08.085

URL : https://hal.archives-ouvertes.fr/hal-00204753

P. Duval, M. F. Ashby, and I. Et-anderman, Rate-controlling processes in the creep of polycrystalline ice, The Journal of Physical Chemistry, vol.87, issue.21, pp.4066-4074, 1983.
DOI : 10.1021/j100244a014

J. D. Eshelby, The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.241, issue.1226, pp.376-396, 1957.
DOI : 10.1098/rspa.1957.0133

H. H. Espinosa, M. Panico, S. Berbenni, and K. W. Schwarz, Discrete dislocation dynamics simulations to interpret plasticity size and surface effects in freestanding FCC thin films, International Journal of Plasticity, vol.22, issue.11, pp.2091-2117, 2006.
DOI : 10.1016/j.ijplas.2006.01.007

URL : https://hal.archives-ouvertes.fr/hal-00128371

Y. Estrin and L. P. Et-kubin, Local strain hardening and nonuniformity of plastic deformation, Acta Metallurgica, vol.34, issue.12, pp.2455-2466, 1986.
DOI : 10.1016/0001-6160(86)90148-3

P. Franciosi, M. Berveiller, and A. Et-zaoui, Latent hardening in copper and aluminium single crystals, Acta Metallurgica, vol.28, issue.3, pp.273-283, 1980.
DOI : 10.1016/0001-6160(80)90162-5

C. Fressengeas, A. Beaudoin, D. Entemeyer, T. Lebedkina, M. Lebyodkin et al., Dislocation transport and intermittency in the plasticity of crystalline solids, Physical Review B, vol.7, issue.1, p.14108, 2009.
DOI : 10.1126/science.1156101

B. S. Fromm, B. L. Adams, S. Ahmadi, and M. Et-knezevic, Grain size and orientation distributions: Application to yielding of ??-titanium, Acta Materialia, vol.57, issue.8, pp.572339-2348, 2009.
DOI : 10.1016/j.actamat.2008.12.037

J. Fundenberger, M. Philippe, F. Wagner, and C. Et-esling, Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys), Acta Materialia, vol.45, issue.10, pp.454041-4055, 1997.
DOI : 10.1016/S1359-6454(97)00099-2

A. Ghaderi and M. R. Barnett, Sensitivity of deformation twinning to grain size in titanium and magnesium, Acta Materialia, vol.59, issue.20, pp.7824-7839, 2011.
DOI : 10.1016/j.actamat.2011.09.018

D. Gloagen, G. Oum, V. Legrand, J. Fajoui, and S. Et-branchu, Experimental and theoretical studies of intergranular strain in an alpha titanium alloy during plastic deformation, Acta Materialia, vol.61, issue.15, pp.5779-5790, 2013.
DOI : 10.1016/j.actamat.2013.06.022

J. Gong and A. J. Et-wilkinson, Anisotropy in the plastic flow properties of single-crystal ?? titanium determined from micro-cantilever beams, Acta Materialia, vol.57, issue.19, pp.5693-5705, 2009.
DOI : 10.1016/j.actamat.2009.07.064

G. Gottstein, Physical Foundations of Materials Science, 2004.
DOI : 10.1007/978-3-662-09291-0

J. R. Greer, C. R. Weinberger, and W. Et-cai, Comparing the strength of f.c.c. and b.c.c. sub-micrometer pillars: Compression experiments and dislocation dynamics simulations, Materials Science and Engineering: A, vol.493, issue.1-2, pp.21-25, 2008.
DOI : 10.1016/j.msea.2007.08.093

I. Groma, Z. Vandrus, and P. D. Et-ispánovity, Scale-Free Phase Field Theory of Dislocations, Physical Review Letters, vol.114, issue.1, p.15503, 2015.
DOI : 10.1080/09500839.2013.789143

G. W. Groves and A. Kelly, Independent slip systems in crystals, Philosophical Magazine, vol.62, issue.89, pp.877-887, 1963.
DOI : 10.1080/14786436108243308

N. P. Gurao, R. Kapoor, and S. Et-suwas, Deformation behaviour of commercially pure titanium at extreme strain rates, Acta Materialia, vol.59, issue.9, pp.3431-3446, 2011.
DOI : 10.1016/j.actamat.2011.02.018

E. O. Hall, The deformation and aging of mild steel. Part III : discussion and results, Proceedings of the Physical Society of London, pp.747-753, 1951.

S. V. Harren, The finite deformation of rate-dependent polycrystals???I. A self-consistent framework, Journal of the Mechanics and Physics of Solids, vol.39, issue.3, pp.345-383, 1991.
DOI : 10.1016/0022-5096(91)90017-I

Z. Hashin, The inelastic inclusion problem, International Journal of Engineering Science, vol.7, issue.1, pp.11-36, 1969.
DOI : 10.1016/0020-7225(69)90020-2

R. F. Hearmon, The elastic constants of crystals and other anisotropic materials, Group III, vol.11, pp.1-154, 1979.

P. Hähner, K. Bay, and M. Et-zaiser, Fractal Dislocation Patterning During Plastic Deformation, Physical Review Letters, vol.81, issue.12, pp.2470-2473, 1998.
DOI : 10.1016/0025-5416(86)90265-X

R. Hill, Continuum micro-mechanics of elastoplastic polycrystals, Journal of the Mechanics and Physics of Solids, vol.13, issue.2, pp.89-101, 1965.
DOI : 10.1016/0022-5096(65)90023-2

T. Hoc, B. Devincre, and L. P. Et-kubin, Deformation stage I of FCC crystals : Constitutive modelling, Evolution of Deformation Microstructures in 3D, pp.43-59, 2004.

D. Hull and D. J. Et-bacon, Introduction to Dislocations, 2001.

J. Hutchinson, Bounds and Self-Consistent Estimates for Creep of Polycrystalline Materials, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.348, issue.1652, pp.101-127, 1976.
DOI : 10.1098/rspa.1976.0027

S. Jonsson and J. Et-beuers, The dislocation structure in beryllium single crystals deformed by prismatic slip, Materials Science and Engineering, vol.91, pp.111-123, 1987.
DOI : 10.1016/0025-5416(87)90289-8

P. A. Juan, S. Berbenni, M. R. Barnett, C. N. Barnett, and L. Et-capolungo, A double inclusion homogenization scheme for polycrystals with hierarchal topologies: application to twinning in Mg alloys, International Journal of Plasticity, vol.60, pp.182-196, 2014.
DOI : 10.1016/j.ijplas.2014.04.001

URL : https://hal.archives-ouvertes.fr/hal-01503457

S. V. Kailas, Y. V. Prasad, and S. K. Et-biswas, Influence of initial texture on the microstructural instabilities during compression of, Acta materialia, vol.25, pp.1425-1434, 1994.

J. Kaiser, UntersuchungüberUntersuchung¨Untersuchungüber das Auftreten von Geräuschen beim Zugversuch, 1950.

J. Kaiser, Erkentnisse und folgerungen aus der messung von geräuschen bei zugbeanspruchung von metallischen werkstoffen, Archiv Eisenhüttenwesen, p.24, 1953.

S. R. Kalidindi, Incorporation of deformation twinning in crystal plasticity models, Journal of the Mechanics and Physics of Solids, vol.46, issue.2, pp.267-290, 1998.
DOI : 10.1016/S0022-5096(97)00051-3

M. Knezevic, R. A. Lebensohn, O. Cazacu, B. Revil-baudard, G. Proust et al., Modeling bending of ??-titanium with embedded polycrystal plasticity in implicit finite elements, Materials Science and Engineering: A, vol.564, pp.116-126, 2013.
DOI : 10.1016/j.msea.2012.11.037

U. F. Kocks, The relation between polycrystal deformation and single-crystal deformation, Metallurgical and Materials Transactions B, vol.194, issue.5, pp.1121-1143, 1970.
DOI : 10.1080/14786436608212647

U. F. Kocks, Laws for Work-Hardening and Low-Temperature Creep, Journal of Engineering Materials and Technology, vol.98, issue.1, pp.76-85, 1976.
DOI : 10.1115/1.3443340

U. F. Kocks and H. Et-mecking, Physics and phenomenology of strain hardening: the FCC case, Progress in Materials Science, vol.48, issue.3, pp.171-273, 2003.
DOI : 10.1016/S0079-6425(02)00003-8

B. Kouchmeshky and N. Et-zabaras, Modeling the response of HCP polycrystals deforming by slip and twinning using a finite element representation of the orientation space, Computational Materials Science, vol.45, issue.4, pp.1043-1051, 2009.
DOI : 10.1016/j.commatsci.2009.01.009

R. Kouddane, A. Molinari, and G. R. Et-canova, Self-consistent modelling of heterogeneous viscoelastic and elastoplastic materials, Mecamat 91 : Large RÉFÉRENCES BIBLIOGRAPHIQUES Plastic Deformations, Fundamentals and Application to Metal Forming, pp.129-141, 1993.

K. Kowalczyk-gajewska and H. Et-petryk, Sequential linearization method for viscous/elastic heterogeneous materials, European Journal of Mechanics - A/Solids, vol.30, issue.5, pp.650-664, 2011.
DOI : 10.1016/j.euromechsol.2011.04.002

URL : https://hal.archives-ouvertes.fr/hal-00769679

J. Krasova and P. Et-kratochvil, Temperature dependence of the flow stress in secondary glide planes of cadmium single crystals, Physica Status Solidi (a), vol.61, issue.1, pp.255-261, 1971.
DOI : 10.2320/matertrans1960.5.14

E. Kröner, Zur plastischen verformung des vielkristalls, Acta Metallurgica, vol.9, issue.2, pp.155-161, 1961.
DOI : 10.1016/0001-6160(61)90060-8

E. Kröner, Modified Green Functions in the Theory of Heterogeneous and/or Anisotropic Linearly Elastic Media, Micromechanics and inhomogeneity, pp.197-211, 1989.
DOI : 10.1007/978-1-4613-8919-4_13

L. P. Kubin, Dislocations, mesoscale simulations and plastic flow, 2013.
DOI : 10.1093/acprof:oso/9780198525011.001.0001

L. P. Kubin, B. Devincre, and T. Et-hoc, Modeling dislocation storage rates and mean free paths in face-centered cubic crystals, Acta Materialia, vol.56, issue.20, pp.6040-6049, 2008.
DOI : 10.1016/j.actamat.2008.08.012

D. Kuhlmann-wilsdorf, Theory of workhardening 1934-1984, Metallurgical Transactions A, vol.2, issue.2, pp.2091-2108, 1985.
DOI : 10.1080/01418618108235814

I. Kunin, Projection operator in continuum mechanics, Continuum Models of Discrete Systems, pp.179-187, 1981.

I. A. Kunin, Elastic media with microstructure II : Three-dimensional models, Springer Series in Solid-State Sciences 44, pp.179-187, 1983.
DOI : 10.1007/978-3-642-81960-5

B. Legrand, Influence de la structuré electronique sur la facilité relative des glissements dans les métaux de structure hexagonale compacte, Thèse de doctorat Thèse d'´ etat, 1984.

E. D. Levine, Deformation mechanisms in titanium at low temperatures, Transactions of the Metallurgical Society of AIME, vol.236, pp.1558-1565, 1966.

T. H. Lin, Analysis of elastic and plastic strains of a face-centred cubic crystal, Journal of the Mechanics and Physics of Solids, vol.5, issue.2, pp.143-149, 1956.
DOI : 10.1016/0022-5096(57)90058-3

G. London, V. Damiano, and H. Conrad, Microstrain compression of beryllium and beryllium alloy single crystals parallel to the [001]. Part I. Crystal preparation and microstrain properties, Transactions of the Metallurgical Society of AIME, vol.242, pp.987-979, 1968.

R. Madec, B. Devincre, L. P. Kubin, T. Hoc, and D. Et-rodney, The Role of Collinear Interaction in Dislocation-Induced Hardening, Science, vol.301, issue.5641, pp.1879-1882, 2003.
DOI : 10.1126/science.1085477

C. Mareau and S. Et-berbenni, An affine formulation for the self-consistent modeling of elasto-viscoplastic heterogeneous materials based on the translated field method, International Journal of Plasticity, vol.64, pp.134-150, 2015.
DOI : 10.1016/j.ijplas.2014.08.011

R. Masson, M. Bornet, P. Suquet, and A. Et-zaoui, An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals, Journal of the Mechanics and Physics of Solids, vol.48, issue.6-7, pp.1203-1227, 2000.
DOI : 10.1016/S0022-5096(99)00071-X

URL : https://hal.archives-ouvertes.fr/hal-01666054

R. Masson, R. Brenner, and O. Et-castelnau, Incremental homogenization approach for ageing viscoelastic polycrystals, Comptes Rendus M??canique, vol.340, issue.4-5, pp.378-386, 2012.
DOI : 10.1016/j.crme.2012.02.021

URL : https://hal.archives-ouvertes.fr/hal-01205563

R. Masson and A. Et-zaoui, Self-consistent estimates for the rate-dependentelastoplastic behaviour of polycrystalline materials, Journal of the Mechanics and Physics of Solids, vol.47, issue.7, pp.1543-1568, 1999.
DOI : 10.1016/S0022-5096(98)00106-9

K. Máthis and F. Et-chmelík, Exploring Plastic Deformation of Metallic Materials by the Acoustic Emission Technique, pp.23-48, 2012.
DOI : 10.5772/31660

K. Máthis, F. Chmelík, M. Janecek, B. Hadzima, Z. Trojanova et al., Investigating deformation processes in AM60 magnesium alloy using the acoustic emission technique, Acta Materialia, vol.54, issue.20, pp.5361-5366, 2006.
DOI : 10.1016/j.actamat.2006.06.033

K. Máthis, J. Capek, and P. Et-luká?, In-situ neutron diffraction and acoustic emission investigation of twinning activity in magnesium, Journal of Physics- Conference series, pp.1742-659, 2011.

T. Matsunaga, T. Kameyama, K. Takahashi, and E. Sato, Constitutive Relation for Ambient-Temperature Creep in Hexagonal Close-Packed Metals, MATERIALS TRANSACTIONS, vol.50, issue.12, pp.2858-2864, 2009.
DOI : 10.2320/matertrans.M2009223

R. J. Mcdonald, Characterization of delamination in 2099 ?T 861 aluminum-lithium, Thèse de doctorat, 2009.

H. Mecking and U. F. Et-kocks, Kinetics of flow and strain-hardening, Acta Metallurgica, vol.29, issue.11, pp.1862-1875, 1981.
DOI : 10.1016/0001-6160(81)90112-7

S. Mercier and A. Et-molinari, Homogenization of elastic???viscoplastic heterogeneous materials: Self-consistent and Mori-Tanaka schemes, International Journal of Plasticity, vol.25, issue.6, pp.1024-1048, 2009.
DOI : 10.1016/j.ijplas.2008.08.006

S. Mercier, A. Molinari, S. Berbenni, and M. Et-berveiller, Comparison of different homogenization approaches for elastic???viscoplastic materials, Modelling and Simulation in Materials Science and Engineering, vol.20, issue.2, p.24004, 2012.
DOI : 10.1088/0965-0393/20/2/024004

S. D. Mesarovic and J. W. Et-kysar, Continuum aspects of directionally dependent cracking of an interface between copper and alumina crystals, Mechanics of Materials, vol.23, issue.4, pp.271-286, 1996.
DOI : 10.1016/0167-6636(96)00028-2

M. A. Meyers, O. Vöhringer, and V. A. Et-lubarda, The onset of twinning in metals: a constitutive description, Acta Materialia, vol.49, issue.19, pp.4025-4039, 2001.
DOI : 10.1016/S1359-6454(01)00300-7

J. C. Michel, H. Moulinec, and P. Suquet, A computational scheme for linear and non???linear composites with arbitrary phase contrast, International Journal for Numerical Methods in Engineering, vol.58, issue.12, pp.139-160, 2001.
DOI : 10.1016/S0266-3538(97)00162-0

Y. Minonishi, S. Morozumi, and H. Et-yoshinaga, {112} <23> slip in titanium, Scripta Metallurgica, vol.16, issue.4, pp.427-430, 1982.
DOI : 10.1016/0036-9748(82)90166-1

A. Molinari, Averaging Models for Heterogeneous Viscoplastic and Elastic Viscoplastic Materials, Journal of Engineering Materials and Technology, vol.320, issue.1, pp.62-70, 2002.
DOI : 10.1016/S0167-6636(98)00054-4

A. Molinari, G. Canova, and S. Et-ahzi, A self consistent approach of the large deformation polycrystal viscoplasticity, Acta Metallurgica, vol.35, issue.12, pp.2983-2994, 1987.
DOI : 10.1016/0001-6160(87)90297-5

S. N. Monteiro and R. E. Et-reed-hill, An empirical analysis of titanium stress-strain curves, Metallurgical Transactions, vol.12, issue.4, pp.1011-1015, 1973.
DOI : 10.1007/978-3-662-40293-1

H. Moulinec and P. Suquet, A numerical method for computing the overall response of nonlinear composites with complex microstructure, Computer Methods in Applied Mechanics and Engineering, vol.157, issue.1-2, pp.69-94, 1998.
DOI : 10.1016/S0045-7825(97)00218-1

URL : https://hal.archives-ouvertes.fr/hal-01282728

R. N. Mudrock, M. A. Lebyodkin, P. Kurath, A. J. Beaudoin, and T. A. Et-lebedkina, Strain-rate fluctuations during macroscopically uniform deformation of a solution-strengthened alloy, Scripta Materialia, vol.65, issue.12, pp.1093-1096, 2011.
DOI : 10.1016/j.scriptamat.2011.09.025

T. Mura, Micromechanics of defects in solids, 1987.

S. Naka, ´ Etude des mécanismes de déformation plastiquè a basse, 1983.

S. Naka, L. P. Kubin, and C. Et-perrier, The plasticity of titanium at low and medium temperatures, Philosophical Magazine A, vol.33, issue.5, pp.1035-1043, 1991.
DOI : 10.1080/01418619108213937

S. Naka and A. Et-lasalmonie, Cross-slip on the first order pyramidal plane (10 $$\bar 1$$ 1) of a-type dislocations [1 $$\bar 2$$ 10] in the plastic deformation of ?-titanium single crystals, Journal of Materials Science, vol.47, issue.9, pp.2613-2617, 1983.
DOI : 10.1007/BF00547577

S. Nemat-nasser, W. Guo, and J. Et-cheng, Mechanical properties and deformation mechanisms of a commercially pure titanium, Acta Materialia, vol.47, issue.13, pp.3705-3720, 1999.
DOI : 10.1016/S1359-6454(99)00203-7

E. Nesterova, B. Bacroix, and C. Et-teodosiu, Microstructure and texture evolution under strain-path changes in low-carbon interstitial-free steel, Metallurgical and Materials Transactions A, vol.5, issue.10, pp.2527-2538, 2001.
DOI : 10.1098/rspa.1990.0103

N. Nicaise, Effets de longueur interne sur les propriétés effectives des polycristaux métalliques : applications aux aciers, Thèse de doctorat, 2009.

M. E. Nixon, O. Cazacu, and R. A. Et-lebensohn, Anisotropic response of high-purity ??-titanium: Experimental characterization and constitutive modeling, International Journal of Plasticity, vol.26, issue.4, pp.516-532, 2010.
DOI : 10.1016/j.ijplas.2009.08.007

A. Paquin, Modélisation micromécanique du comportementélastoviscoplascomportementélastoviscoplastique des matériaux hétérogènes, Thèse de doctorat, 1998.

A. Paquin, H. Sabar, and M. Et-berveiller, Integral formulation and self-consistent modelling of elastoviscoplastic behavior of heterogeneous materials, Archive of Applied Mechanics (Ingenieur Archiv), vol.69, issue.1, pp.14-35, 1999.
DOI : 10.1007/s004190050201

P. G. Partridge, The crystallography and deformation modes of hexagonal close-packed metals, Metalurgical Review, vol.118, pp.169-194, 1967.

N. E. Paton and W. A. Et-backofen, Plastic deformation of titanium at elevated temperatures, Metallurgical and Materials Transactions, vol.1, p.2839, 1970.

N. J. Petch, The cleavage strength of polycrystals, Journal of Iron Steel Institute, vol.174, pp.25-28, 1953.

M. Philippe, M. Serghat, P. Van-houtte, and C. Et-esling, Modelling of texture evolution for materials of hexagonal symmetry???II. application to zirconium and titanium ?? or near ?? alloys, Acta Metallurgica et Materialia, vol.43, issue.4, pp.1619-1630, 1995.
DOI : 10.1016/0956-7151(94)00329-G

O. Pierard and I. Et-doghri, An enhanced affine formulation and the corresponding numerical algorithms for the mean-field homogenization of elastoviscoplastic composites, International Journal of Plasticity, vol.69, pp.131-157, 2006.

O. Pierard, J. Llorca, J. Segurado, and I. Et-doghri, Micromechanics of particle-reinforced elasto-viscoplastic composites: Finite element simulations versus affine homogenization, International Journal of Plasticity, vol.23, issue.6, pp.1041-1060, 2007.
DOI : 10.1016/j.ijplas.2006.09.003

G. Piobert, Traité d'artillerie, 1842.

J. P. Poirier, J. Antolin, and J. M. Et-dupouy, INVESTIGATIONS ON SOME DEFORMATION MODES OF BERYLLIUM, Canadian Journal of Physics, vol.262, issue.2, pp.1221-1223, 1967.
DOI : 10.1139/p67-090

J. P. Poirier and R. Et-le-hazif, Microscopié electronique et déformation plastique des métaux et alliages hexagonaux compacts, Journal of Electron Spectroscopy, vol.1, pp.595-607, 1976.

P. Castaneda and P. , Exact second-order estimates for the effective mechanical properties of nonlinear composite materials, Journal of the Mechanics and Physics of Solids, vol.44, issue.6, pp.827-862, 1996.
DOI : 10.1016/0022-5096(96)00015-4

A. Portevin and M. Et-le-chatelier, Tensile tests of alloys undergoing transformation. Comptes Rendus de l, Académie des Sciences, vol.176, pp.507-510, 1923.

A. Poty, J. Raulot, H. Xu, J. Bai, C. Schuman et al., Classification of the critical resolved shear stress in the hexagonal-close-packed materials by atomic simulation: Application to ??-zirconium and ??-titanium, Journal of Applied Physics, vol.110, issue.1, pp.14905-14906, 2011.
DOI : 10.1103/PhysRevB.76.144108

H. Sabar, M. Berveiller, V. Favier, and S. Et-berbenni, A new class of micro???macro models for elastic???viscoplastic heterogeneous materials, International Journal of Solids and Structures, vol.39, issue.12, pp.3257-3276, 2002.
DOI : 10.1016/S0020-7683(02)00256-1

URL : https://hal.archives-ouvertes.fr/hal-00128381

A. A. Salem, S. R. Kalidindi, and R. G. Et-doherty, Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium, Scripta Materialia, vol.46, issue.6, pp.419-423, 2002.
DOI : 10.1016/S1359-6462(02)00005-2

A. A. Salem, S. R. Kalidindi, and R. G. Et-doherty, Strain hardening of titanium: role of deformation twinning, Acta Materialia, vol.51, issue.14, pp.4225-4237, 2003.
DOI : 10.1016/S1359-6454(03)00239-8

A. A. Salem, S. R. Kalidindi, R. G. Doherty, and S. L. Et-semiatin, Strain hardening due to deformation twinning in ??-titanium: Mechanisms, Metallurgical and Materials Transactions A, vol.246, issue.1, pp.259-268, 2006.
DOI : 10.1016/S0921-5093(97)00713-2

A. A. Salem, S. R. Kalidindi, and S. L. Et-semiatin, Strain hardening due to deformation twinning in ??-titanium: Constitutive relations and crystal-plasticity modeling, Acta Materialia, vol.53, issue.12, pp.3495-3502, 2005.
DOI : 10.1016/j.actamat.2005.04.014

D. Sarker and D. L. Et-chen, Detwinning and strain hardening of an extruded magnesium alloy during compression, Scripta Materialia, vol.67, issue.2, pp.165-168, 2012.
DOI : 10.1016/j.scriptamat.2012.04.007

E. Schmid, Neuere untersuchungen an metallkristallen, Proc. 1st Int, 1924.

I. Shashkov, Etude multi-´ echelle de l'intermittence de la déformation plastiquè a l'aide de l'´ emission acoustique, Thèse de doctorat, 2012.

I. V. Shashkov, M. A. Lebyodkin, and T. A. Et-lebedkina, Multiscale study of acoustic emission during smooth and jerky flow in an AlMg alloy, Acta Materialia, vol.60, issue.19, pp.6842-6850, 2012.
DOI : 10.1016/j.actamat.2012.08.058

S. G. Song, I. Gray, and G. T. , Structural interpretation of the nucleation and growt of deformation twins in Zr and Ti?I. application of the coincidence site lattice (csl) theory to twinning problems in hcp structures, Acta Metallurgica et Materialia, pp.2325-2337, 1995.

A. Staroselsky and L. Et-anand, A constitutive model for hcp materials deforming by slip and twinning, International Journal of Plasticity, vol.19, issue.10, pp.1843-1864, 2003.
DOI : 10.1016/S0749-6419(03)00039-1

J. F. Stohr and J. P. Et-poirier, Etude en microscopie electronique du glissement pyramidal {1122} ???1123??? dans le magnesium, Philosophical Magazine, vol.68, issue.6, pp.1313-1329, 1972.
DOI : 10.1016/0036-9748(68)90103-8

K. Tanaka and T. Et-mori, Note on volume integrals of the elastic field around an ellipsoidal inclusion, Journal of Elasticity, vol.23, issue.3, pp.199-200, 1972.
DOI : 10.1007/BF00125528

G. I. Taylor, Plastic strain in metals, Journal of the Institute of Metals, vol.62, pp.307-324, 1938.

C. N. Tomé, R. A. Lebensohn, and U. F. Et-kocks, A model for texture development dominated by deformation twinning: Application to zirconium alloys, Acta Metallurgica et Materialia, vol.39, issue.11, 1991.
DOI : 10.1016/0956-7151(91)90083-D

P. A. Turner and C. N. Et-tomé, A study of residual stresses in Zircaloy-2 with rod texture, Acta Metallurgica et Materialia, vol.42, issue.12, pp.424143-4153, 1994.
DOI : 10.1016/0956-7151(94)90191-0

W. Tyson, Basal and prismatic slip in h.c.p. crystals. Acta metallurgica, pp.574-577, 1967.

W. R. Tyson, Slip modes of thallium, Acta Metallurgica, vol.17, issue.7, pp.863-868, 1969.
DOI : 10.1016/0001-6160(69)90106-0

P. Van-houtte, Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning, Acta Metallurgica, vol.26, issue.4, pp.591-604, 1978.
DOI : 10.1016/0001-6160(78)90111-6

A. V. Vinogradov, V. Patlan, and S. Et-hashimoto, Spectral analysis of acoustic emission during cyclic deformation of copper single crystals, Philosophical Magazine A, vol.37, issue.6, pp.1427-1446, 2001.
DOI : 10.1111/j.1460-2695.1985.tb00426.x

V. Mises and R. , Mechanik der plastischen Form??nderung von Kristallen, ZAMM - Zeitschrift f??r Angewandte Mathematik und Mechanik, vol.36, issue.3, pp.161-85, 1928.
DOI : 10.1002/zamm.19280080302

B. Wang, R. Xin, G. Huang, and Q. Et-liu, Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression, Materials Science and Engineering: A, vol.534, pp.588-593, 2012.
DOI : 10.1016/j.msea.2011.12.013

H. Wang, P. Wu, C. Tomé, and Y. Et-huang, A finite strain elastic???viscoplastic self-consistent model for polycrystalline materials, Journal of the Mechanics and Physics of Solids, vol.58, issue.4, pp.594-612, 2010.
DOI : 10.1016/j.jmps.2010.01.004

J. Wang, J. P. Hirth, and C. N. Et-tomé, (1??012) Twinning nucleation mechanisms in hexagonal-close-packed crystals, Acta Materialia, vol.57, issue.18, pp.5521-5530, 2013.
DOI : 10.1016/j.actamat.2009.07.047

L. Wang, Y. Wang, P. Eisenlohr, T. R. Bieler, M. A. Crimp et al., Twin Nucleation by Slip Transfer across Grain Boundaries in Commercial Purity Titanium, Metallurgical and Materials Transactions A, vol.432, issue.318, pp.421-430, 2010.
DOI : 10.1016/j.scriptamat.2007.02.030

S. Wang, C. Schuman, L. Bao, J. Lecomte, Y. Zhang et al., Variant selection criterion for twin variants in titanium alloys deformed by rolling, Acta Materialia, vol.60, issue.9, pp.3912-3919, 2012.
DOI : 10.1016/j.actamat.2012.03.046

J. L. Warwick, N. G. Jones, K. M. Rahman, and D. Et-dye, Lattice strain evolution during tensile and compressive loading of CP Ti, Acta Materialia, vol.60, issue.19, pp.6720-6731, 2012.
DOI : 10.1016/j.actamat.2012.08.042

J. Weiss and J. R. Et-grasso, Acoustic Emission in Single Crystals of Ice, The Journal of Physical Chemistry B, vol.101, issue.32, pp.6113-6117, 1997.
DOI : 10.1021/jp963157f

J. Weiss and D. Et-marsan, Three-Dimensional Mapping of Dislocation Avalanches: Clustering and Space/Time Coupling, Science, vol.299, issue.5603, pp.89-92, 2003.
DOI : 10.1126/science.1079312

J. Weiss, W. B. Rhouma, T. Richeton, S. Dechanel, F. Louchet et al., From Mild to Wild Fluctuations in Crystal Plasticity, Physical Review Letters, vol.19, issue.10, p.105504, 2015.
DOI : 10.1515/jmbm-2012-0006

URL : https://hal.archives-ouvertes.fr/hal-01514677

J. Weiss, T. Richeton, F. Louchet, F. Chmelík, P. Dobron et al., Evidence for universal intermittent crystal plasticity from acoustic emission and high-resolution extensometry experiments, Physical Review B, vol.4, issue.389, p.224110, 2007.
DOI : 10.1126/science.1124141

URL : https://hal.archives-ouvertes.fr/insu-00377530

G. J. Weng, Self-Consistent Determination of Time-Dependent Behavior of Metals, Journal of Applied Mechanics, vol.48, issue.1, pp.41-46, 1981.
DOI : 10.1115/1.3157590

G. J. Weng, A Self-Consistent Scheme for the Relaxation Behavior of Metals, Journal of Applied Mechanics, vol.48, issue.4, pp.779-784, 1981.
DOI : 10.1115/1.3157733

J. W. Won, K. T. Park, S. G. Hong, and C. S. Et-lee, Anisotropic yielding behavior of rolling textured high purity titanium, Materials Science and Engineering: A, vol.637, pp.215-221, 2015.
DOI : 10.1016/j.msea.2015.03.096

H. Y. Wu and F. Z. Et-lin, Mechanical properties and strain-hardening behavior of Mg alloy AZ31B-H24 thin sheet, Materials Science and Engineering: A, vol.527, issue.4-5, pp.1194-1199, 2010.
DOI : 10.1016/j.msea.2009.09.049

X. Wu, S. R. Kalidindi, C. Necker, and A. A. Salem, Prediction of crystallographic texture evolution and anisotropic stress???strain curves during large plastic strains in high purity ??-titanium using a Taylor-type crystal plasticity model, Acta Materialia, vol.55, issue.2, pp.423-432, 2007.
DOI : 10.1016/j.actamat.2006.08.034

T. Xiaoli, G. Haicheng, Z. Shufen, and C. Laird, Loading mode dependence of deformation microstructure in a high-purity titanium single crystal oriented for difficult glide, Materials Science and Engineering: A, vol.189, issue.1-2, pp.77-84, 1994.
DOI : 10.1016/0921-5093(94)90403-0

B. Xu, L. Capolungo, and D. Et-rodney, On the importance of prismatic/basal interfaces in the growth of twins in hexagonal close packed crystals, Scripta Materialia, vol.68, issue.11, pp.901-904, 2013.
DOI : 10.1016/j.scriptamat.2013.02.023

URL : https://hal.archives-ouvertes.fr/hal-00839674

M. H. Yoo, Slip, twinning, and fracture in hexagonal close-packed metals, Metallurgical Transactions A, vol.6, issue.a, pp.409-418, 1981.
DOI : 10.1002/pssa.2210240251

S. Zaefferer, A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture, Materials Science and Engineering: A, vol.344, issue.1-2, pp.20-30, 2003.
DOI : 10.1016/S0921-5093(02)00421-5

M. Zaiser, Scale invariance in plastic flow of crystalline solids, Advances in Physics, vol.26, issue.1-2, pp.185-245, 2006.
DOI : 10.1103/PhysRevLett.68.670

C. Zambaldi, Y. Yang, T. R. Bieler, and D. Et-raabe, Orientation informed nanoindentation of ??-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip, Journal of Materials Research, vol.7, issue.01, pp.356-367, 2012.
DOI : 10.1093/comjnl/7.4.308

L. B. Zuev and S. A. Et-barannikova, Evidence for the existence of localized plastic flow au-to-waves generated in deforming metals, Natural Science, vol.02, issue.05, pp.476-483, 2010.
DOI : 10.4236/ns.2010.25059

L. B. Zuev and S. A. Et-barannikova, A new model of localized plastic flow and failure of solids, Procedia Engineering, vol.10, pp.948-952, 2011.
DOI : 10.1016/j.proeng.2011.04.156

L. B. Zuev and V. I. Et-danilov, Plastic deformation viewed as evolution of an active medium, International Journal of Solids and Structures, vol.34, issue.29, pp.3795-3805, 1997.
DOI : 10.1016/S0020-7683(97)00003-6

. Salem, Essais de compression simple sur du ?-titane, du laiton 70/30 et du cuivre, p.35, 2003.

. Weiss, de déplacement d'une section de l'´ eprouvette de traction du monocristal de cuivre orienté pour le glissement multiple, Des distributions similaires ontétéontété publiées pour la vitesse de déformation locale, p.55, 2007.

. Weiss, ´ emission acoustique observée sur un monocristal de glace lors du fluage en compression, sur un monocristal de cuivre en traction simple et sur un polycristal d'aluminium en essais cyclique traction-compression, p.56, 2015.

. Bachmann, orientations) et tracées avec la bo??tèbo??tè a outils MTEX, pp.771-65, 2010.

C. Tôle-eprouvettes-du and .. Ti, 65 LISTE DES FIGURES VII.10Distribution statistique des amplitudes normalisées des fluctuations de la vitesse de déformation locale pour une des sections de l'´ eprouvette DT (voir figure VII.9)