CAD-based calculation of cutting force components in gear hobbing, J. Manuf. Sci. Eng, vol.134, issue.3, pp.31009-31010, 2012. ,
CAD-based simulation of the hobbing process for the manufacturing of spur and helical gears, The International Journal of Advanced Manufacturing Technology, vol.14, issue.5, pp.41-44, 2009. ,
DOI : 10.1299/jsmec.47.1140
Engrenages parallèles Etude géométrique, pp.5620-5621, 2002. ,
Dynamic analysis of the cutting forces in gear hobbing, thèse, 2002. ,
Contribution à la compréhension des modes d'actions tribologiques et thermiques des revêtements en usinage. Application au cas du taillage de dentures à la fraise-mère à grande vitesse, Arts et Métiers ParisTech, 2002. ,
Gear fundamentals-the Gear hobbing process, Gear Technol, vol.11, pp.38-44, 1994. ,
Manufacturing of cylindrical gears by generating cutting processes: A critical synthesis of analysis methods, CIRP Annals, vol.57, issue.2, pp.676-696, 2008. ,
DOI : 10.1016/j.cirp.2008.09.001
An Innovative Way of Designing Gear Hobbing Processes, Proc. Int. Conf. Gears, pp.393-404, 2010. ,
Gear Hobbing: a Contribution to Analogy Testing and its Wear Mechanisms, Procedia CIRP, vol.1, issue.1, pp.220-225, 2012. ,
DOI : 10.1016/j.procir.2012.04.039
URL : https://doi.org/10.1016/j.procir.2012.04.039
Machine tools for large parts, CIRP Annals, vol.62, issue.2, pp.731-750, 2013. ,
DOI : 10.1016/j.cirp.2013.05.009
Fonderie d'acier : Coulée des grosses pièces, pp.1-20, 2008. ,
Fonderie d'acier : Moulage des grosses pièces, Tech. Ing, p.9, 2008. ,
Experimental and numerical analyses of the tool wear in rough turning of large dimensions components of nuclear power plants, Wear, vol.312, issue.1-2, pp.40-50, 2014. ,
DOI : 10.1016/j.wear.2014.02.005
URL : https://hal.archives-ouvertes.fr/hal-01424975
Characterization of machining of AISI 1045 steel over a wide range of cutting speeds. Part 2: Evaluation of flow stress models and interface friction distribution schemes, Proc. Inst, pp.917-926, 2007. ,
DOI : 10.1016/S0043-1648(03)00390-9
Hybrid modelling of sliding???sticking zones at the tool???chip interface under dry machining and tool wear analysis, Wear, vol.286, issue.287, pp.45-54, 2012. ,
DOI : 10.1016/j.wear.2011.05.001
A new friction law for sticking and sliding contacts in machining, Tribology International, vol.44, issue.7-8, pp.764-771, 2011. ,
DOI : 10.1016/j.triboint.2011.01.007
Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys, International Journal of Machine Tools and Manufacture, vol.45, issue.12-13, pp.45-1436, 2005. ,
DOI : 10.1016/j.ijmachtools.2005.01.026
Etude des mécanismes d'endommagement des outils carbure Wc-Co par la caractérisation de l'interface outil-copeau : Application à l'usinage à sec de l'alliage d'aluminium aéronautique AA2024 T351, Ecole Nationale Supérieure d'Arts et Métiers Centre de Bordeaux, 2004. ,
Etude des aspects thermiques et métallurgiques de la coupe orthogonale d'un acier au carbone, 1995. ,
The Metallurgical Aspects of Machining, CIRP Annals, vol.35, issue.2, pp.537-550, 1986. ,
DOI : 10.1016/S0007-8506(07)60199-2
Was kostet die Kühlschmierung?, pp.19-23, 1995. ,
Potential und Grenzen umweltgerechter Fertigung, Neue Moglichkeiten Umw. Gerechter Fert. Semin. Univ. Hann, 1996. ,
Dry Cutting, CIRP Annals, vol.46, issue.2, pp.519-526, 1997. ,
DOI : 10.1016/S0007-8506(07)60877-4
The effect of coatings on the cutting process, friction, forces and predictive cutting models in machining operations, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.18, issue.3, pp.347-356, 2002. ,
DOI : 10.1179/mst.1987.3.2.155
Metal cutting, 1977. ,
Process Models for the Incorporation of gear Hobbing into an Information Centre for Machining Data, CIRP Annals, vol.30, issue.1, pp.77-82, 1981. ,
DOI : 10.1016/S0007-8506(07)60899-3
Konzept und technolgischer Grundlagen zur automatisierten Erstellung optimaler Bearbeitungsdaten fuer das Waelzfraesen, Habilit. RWTH, 1981. ,
Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models, Journal of Manufacturing Science and Engineering, vol.108, issue.109, pp.42-51, 2002. ,
DOI : 10.1016/S0257-8972(98)00636-7
Leistungssteigerung beim Wälzfräsen mit Schnellarbeitsstahl durch Analyse, Beurteilung und Beeinflussung des Zerspanprozesses, 1977. ,
Influence of coatings on hob milling tool life, Proc Int. Conf. Coat, 1999. ,
Taillage et rectification des engrenages : procédés, 1998. ,
Mechanics of the Metal Cutting Process. II. Plasticity Conditions in Orthogonal Cutting, Journal of Applied Physics, vol.27, issue.6, pp.318-324, 1945. ,
DOI : 10.1103/PhysRev.48.825
Assessment of deformation of a shear localized chip in high speed machining, Journal of Materials Processing Technology, vol.129, issue.1-3, pp.101-104, 2002. ,
DOI : 10.1016/S0924-0136(02)00583-6
FEM-supported simulation of chip formation and flow in gear hobbing of spur and helical gears, CIRP Journal of Manufacturing Science and Technology, vol.1, issue.1, pp.18-26, 2008. ,
DOI : 10.1016/j.cirpj.2008.06.004
Advances in gear hobbing, 1951. ,
Determination of cutting part of hob and conditions of its economical utilisation, 1954. ,
Untersuchung der Haupt -schnit tkraft beim Waelzfraesen von Stirnraedern, Diss. Ion RWTH-Aachen Ger, 1967. ,
Ueber den Verschleiss am Waelzfraeser, Diss. Ion RWTH- Aachen Ger, 1970. ,
Leistungssteigerung bei der Zylinderradherstellung durch systemat ische Erfassung der Zerspantechnik, 1973. ,
Modellierung und Simulation von Zerspanverfahren mithilfe der Durchdringungsrechnung am Beispiel des Wälzfräsens, 2011. ,
Determination of the impact tool stresses during gear hobbing and determination of cutting forces during hobbing of hardened gears, 1988. ,
Software-based process design in gear finish hobbing, Gear Technol, vol.27, issue.3, pp.48-52, 2010. ,
Hob3D: a novel gear hobbing simulation software, World congress on engineering, pp.6-8, 2011. ,
Advanced Computer Aided Design Simulation of Gear Hobbing by Means of Three-Dimensional Kinematics Modeling, Journal of Manufacturing Science and Engineering, vol.14, issue.5, pp.911-918, 2007. ,
DOI : 10.1299/jsmec.47.1140
Ermittlung des zeitlichen Verlaufes der Zerspankraftkomponenten beim Waelzfrassen. Teil 2. Einfluesse technologischer Parameter, VDI-Ber, vol.121, issue.20, pp.1016-1026 ,
Ermittlung des zeitlichen Verlaufs der Zerspankraftkomponenten beim Waelzfraesen Teil 1: Digitalrechnerprogramm FRDYN, VDI-Ber, vol.121, issue.19, pp.943-950, 1979. ,
Spezifische shnittkraefte bei der metall-bearbeitung, 1957. ,
Basic Study on Cutting Forces in Gear Cutting : Theory of Cutting with Two Continuous Symmetrical Cutting Edges, JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing, vol.36, issue.4, pp.543-548, 1993. ,
DOI : 10.1299/jsmec1993.36.543
Influence of machining data on developed cutting forces in gear hobbing, International Journal of Machining and Machinability of Materials, vol.14, issue.1, pp.66-76, 2013. ,
DOI : 10.1504/IJMMM.2013.055121
Shear force computation with hobs, Diss. RWTH Aachen, 1988. ,
A new thermomechanical model of cutting applied to turning operations. Part I. Theory, International Journal of Machine Tools and Manufacture, vol.45, issue.2, pp.166-180, 2005. ,
DOI : 10.1016/j.ijmachtools.2004.07.004
A new thermomechanical model of cutting applied to turning operations. Part II. Parametric study, International Journal of Machine Tools and Manufacture, vol.45, issue.2, pp.181-193, 2005. ,
DOI : 10.1016/j.ijmachtools.2004.07.005
Material Constitutive Modeling Under High Strain Rates and Temperatures Through Orthogonal Machining Tests, Journal of Manufacturing Science and Engineering, vol.24, issue.4, pp.577-585, 1999. ,
DOI : 10.1115/1.3453905
Mechanics of Machining: An Analytical Approach to Assessing Machinability, Journal of Applied Mechanics, vol.57, issue.1, pp.136-182, 1989. ,
DOI : 10.1115/1.2888318
A Gear Cutting Predictive Model Using the Finite Element Method, Procedia CIRP, vol.8, pp.51-56, 2013. ,
DOI : 10.1016/j.procir.2013.06.064
Soft gear cutting with coated HSS tools-operating conditions, technical data and performance potentials, Proceedings of the Conference on THE Coatings, pp.127-137, 1999. ,
Fatigue Fracture Investigation of Cemented Carbide Tools in Gear Hobbing, Part 1: FEM Modeling of Fly Hobbing and Computational Interpretation of Experimental Results, Journal of Manufacturing Science and Engineering, vol.1, issue.1, p.784, 2002. ,
DOI : 10.1016/S0007-8506(07)61597-2
Influence of cutting edge preparation on the wear resistance in high speed dry gear hobbing, Wear, vol.261, issue.5-6, pp.5-6, 2006. ,
DOI : 10.1016/j.wear.2005.12.007
Effects of the edge quality on tool life : Application on gear hobbing, Nd Int. Conf. « Innov. Ve Cut. Process. Smart Mach. », pp.1-18, 2008. ,
Process Models for the Incorporation of gear Hobbing into an Information Centre for Machining Data, CIRP Annals, vol.30, issue.1, pp.77-82, 1981. ,
DOI : 10.1016/S0007-8506(07)60899-3
Nouvelle méthode d'analyse de l'écoulement du copeau en tournage s' appuyant sur une technique de numérisation 3D, 20ème Congrès Fr. Mécanique, p.6, 2011. ,
Qualité géométrique de la mesure de surfaces complexes par moyens optiques, 2002. ,
Reproducing wear mechanisms in gear hobbing???Evaluation of a single insert milling test, Wear, vol.267, issue.12, pp.2257-2268, 2009. ,
DOI : 10.1016/j.wear.2009.04.004
Memotech plus : industrialisation & Mécanique usinage des matériaux métalliques, 2010. ,
Mesure en continu de l'usure des outils de coupe par micro-sondes incorporées, 1991. ,
A Study of the BTA Deep Drilling Process through a Quantitative and Qualitative Analysis of the Chip Formation Process, Key Engineering Materials, vol.554, issue.557, pp.1992-2008, 2013. ,
DOI : 10.4028/www.scientific.net/KEM.554-557.1992
URL : https://hal.archives-ouvertes.fr/hal-01431199
Contribution à l'étude expérimentale et à la modélisation des matériaux difficiles pour le procédé de forage profond avec système BTA, 2013. ,
The effect of varying the workpiece diameter on the cutting tool clearance angle in tool-life testing, Wear, vol.195, issue.1-2, pp.201-205, 1996. ,
DOI : 10.1016/0043-1648(95)06858-9
Analysis of a new Segmentation Intensity Ratio ???SIR??? to characterize the chip segmentation process in machining ductile metals, International Journal of Machine Tools and Manufacture, vol.51, issue.9, pp.687-700, 2011. ,
DOI : 10.1016/j.ijmachtools.2011.05.007
Quantification of the chip segmentation in metal machining: Application to machining the aeronautical aluminium alloy AA2024-T351 with cemented carbide tools WC-Co, International Journal of Machine Tools and Manufacture, vol.64, pp.102-113, 2013. ,
DOI : 10.1016/j.ijmachtools.2012.08.006
URL : https://hal.archives-ouvertes.fr/hal-01431057
Experimental and analytical analysis of the deep hole drilling process with BTA (Boring Trepanning Association) system, Int. J. Mach. Tools Manuf, 2013. ,
On the Mechanics of Chip Segmentation In Machining, Journal of Engineering for Industry, vol.103, issue.1, pp.33-51, 1981. ,
DOI : 10.1115/1.3184458
Etude des copeaux et de l'intégrité de surface en usinage à grande vitesse de l'alliage de titane TA6V, 2007. ,
Modélisation hybride du frottement local à l'interface outil-copeau en usinage des alliages metalliques, 2010. ,
Cutting steel and iron with cemented carbide tools, Part II: Conditions of seizure at the tool-work interface, J. Iron Steel Inst, vol.201, issue.11, pp.923-932, 1963. ,
hobs with changed cutting edge geometry, Machines&Tooling, vol.32, issue.4, pp.22-25, 1961. ,
Thermoviscoplastic modelling of oblique cutting: forces and chip flow predictions, International Journal of Mechanical Sciences, vol.42, issue.6, pp.1205-1232, 2000. ,
DOI : 10.1016/S0020-7403(99)00036-3
Thermomechanical modelling of oblique cutting and experimental validation, International Journal of Machine Tools and Manufacture, vol.44, issue.9, pp.971-989, 2004. ,
DOI : 10.1016/j.ijmachtools.2004.01.018
An investigation of zero helix peripheral up-milling, International Journal of Machine Tool Design and Research, vol.10, issue.2, pp.273-291, 1970. ,
DOI : 10.1016/0020-7357(70)90011-9
Dynamics of cutting forces in end milling, Ann. CIRP, vol.24, issue.1, pp.21-25, 1975. ,
A mechanistic model for the force system in end milling with application to machining airframes structures, Proc 8th North Am. Manuf. Res Conf, pp.297-303, 1980. ,
The effect of runout on cutting geometry and forces in end milling, International Journal of Machine Tool Design and Research, vol.23, issue.2-3, pp.123-140, 1983. ,
DOI : 10.1016/0020-7357(83)90012-4
End Milling Force Algorithms for CAD Systems, CIRP Annals, vol.40, issue.1, pp.31-34, 1991. ,
DOI : 10.1016/S0007-8506(07)61927-1
Stationary shear band in high-speed machining, Comptes Rendus Académie Sci. Sér. 2 Mécanique Phys, pp.399-405, 1992. ,
Modelling of orthogonal cutting with a temperature dependent friction law, Journal of the Mechanics and Physics of Solids, vol.46, issue.10, pp.46-2103, 1998. ,
DOI : 10.1016/S0022-5096(98)00032-5
Oblique machining with triangular form tools ??? I. Theoretical investigation, International Journal of Machine Tool Design and Research, vol.18, issue.2, pp.67-80, 1978. ,
DOI : 10.1016/0020-7357(78)90010-0
Analytical Prediction of Three Dimensional Cutting Process???Part 1: Basic Cutting Model and Energy Approach, Journal of Engineering for Industry, vol.100, issue.2, pp.222-228, 1977. ,
DOI : 10.1115/1.3439413
The mechanics of continuous chip formation in oblique cutting in the absence of chip distortion. Part 1???Theory, International Journal of Machine Tool Design and Research, vol.23, issue.1, pp.11-20, 1983. ,
DOI : 10.1016/0020-7357(83)90003-3
Development of a general cutting analysis for machining with plane face tools, First International Metal Cutting Conference, pp.11-35, 1983. ,
An upper-bound cutting model for oblique cutting tools with a nose radius, International Journal of Machine Tools and Manufacture, vol.37, issue.2, pp.119-134, 1997. ,
DOI : 10.1016/S0890-6955(96)00015-6
Mechanics of Machining, Ellis Horwood Chichester UK, 1989. ,
Allowing for End Cutting Edge Effects in Predicting Forces in Bar Turning with Oblique Machining Conditions, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.76, issue.2, pp.89-99, 1986. ,
DOI : 10.1016/0020-7357(78)90006-9
Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning, Proc. Inst, pp.213-226, 1987. ,
DOI : 10.1016/0020-7357(76)90043-3
Predicting cutting forces in face milling, International Journal of Machine Tools and Manufacture, vol.34, issue.6, pp.771-783, 1994. ,
DOI : 10.1016/0890-6955(94)90058-2
Development of a general tool model for turning operations based on a variable flow stress theory, International Journal of Machine Tools and Manufacture, vol.35, issue.1, pp.71-90, 1995. ,
DOI : 10.1016/0890-6955(94)E0004-3
Nose radius oblique tool: Cutting force and built-up edge prediction, International Journal of Machine Tools and Manufacture, vol.36, issue.5, pp.585-595, 1996. ,
DOI : 10.1016/0890-6955(95)00065-8
Prediction of Chip Flow Direction and Cutting Forces in Oblique Machining with Nose Radius Tools, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.200, issue.2, pp.305-315, 1995. ,
DOI : 10.1243/PIME_PROC_1982_196_015_02
Prediction of Chip Flow Direction, Cutting Forces and Surface Roughness in Finish Turning, Journal of Manufacturing Science and Engineering, vol.201, issue.1, pp.1-12, 1998. ,
DOI : 10.1115/1.2830102
On the partition of friction heat between sliding solids ,
A finite-element analysis of machining with the tool edge considered, J. Mater. Process. Technol, vol.86, issue.1, pp.45-55, 1999. ,
A Finite Element Model of Orthogonal Metal Cutting, Journal of Engineering for Industry, vol.107, issue.4, pp.349-354, 1985. ,
DOI : 10.1115/1.3186008
Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351), International Journal of Machine Tools and Manufacture, vol.48, issue.11, pp.48-1187, 2008. ,
DOI : 10.1016/j.ijmachtools.2008.03.013
URL : https://hal.archives-ouvertes.fr/hal-00383575
Numerical modelling of orthogonal cutting: Influence of cutting conditions and separation criterion, Proceedings), EDP sciences, pp.417-422, 2006. ,
DOI : 10.1051/jp4:2006134064
Investigations on the effects of friction modeling in finite element simulation of machining, International Journal of Mechanical Sciences, vol.52, issue.1, pp.31-42, 2010. ,
DOI : 10.1016/j.ijmecsci.2009.10.001
Numerical and analytical modeling of orthogonal cutting: The link between local variables and global contact characteristics, International Journal of Mechanical Sciences, vol.53, issue.3, pp.183-206, 2011. ,
DOI : 10.1016/j.ijmecsci.2010.12.007
Metal cutting mechanics, 1966. ,
A Model for the Contact Conditions at the Chip-Tool Interface in Machining, Journal of Tribology, vol.50, issue.3, pp.649-660, 2003. ,
DOI : 10.1098/rspa.1978.0087
Tribology of metal cutting Tribology of metal cutting. Tribology and Interface Engineering Series, 2006. ,
MODELLING OF MATERIAL FLOW STRESS IN CHIP FORMATION PROCESS FROM ORTHOGONAL MILLING AND SPLIT HOPKINSON BAR TESTS, Machining Science and Technology, vol.12, issue.1, pp.131-145, 2005. ,
DOI : 10.1179/mst.1996.12.4.351
Effect of the local friction and contact nature on the Built-Up Edge formation process in machining ductile metals, Tribology International, vol.90, pp.217-227, 2015. ,
DOI : 10.1016/j.triboint.2015.04.024
URL : https://hal.archives-ouvertes.fr/hal-01417920