. Worleyparsons, Strategic Analysis of the Global Status of Carbon Capture and Storage, 2009.

J. Samadi and E. Garbolino, A new dynamic risk analysis framework for co2 capture, transport and storage chain, 29th International Conference of the System Dynamics Society, pp.17-20, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00660586

T. Howes, The eu's new renewable energy directive The New Climate Policies of the European Union : Internal Legislation and Climate Diplomacy, p.117, 2009.

F. Lecomte, E. Broutin, and . Lebas, Le captage du co2, des technologies pour reduire les emissions de gaz aeffet de serre, 2010.

C. Antonio, P. Caraballo, . Rabindran, A. Winning, F. Chahardehi et al., Fracture control strategy for the conversion of oil and gas pipelines to transport co2, Proceedings of the 5th Pipeline Technology Conference, pp.19-20, 2010.

T. Berstad, C. Dørum, . Jp-jakobsen, . Kragset, . Li et al., CO2 pipeline integrity: A new evaluation methodology, Energy Procedia, vol.4, issue.4 4, pp.3000-3007, 2011.
DOI : 10.1016/j.egypro.2011.02.210

A. Elshahomi, C. Lu, G. Michal, X. Liu, A. Godbole et al., Decompression wave speed in CO2 mixtures: CFD modelling with the GERG-2008 equation of state, Applied Energy, vol.140, issue.136, pp.20-32, 2015.
DOI : 10.1016/j.apenergy.2014.11.054

N. Brian, . Leis, J. Robert, . Eiber, A. Carlson et al., Relationship between apparent(total) charpy vee-notch toughness and the corresponding dynamic crackpropagation resistance, The 1998 International Pipeline Conference, pp.723-731, 1998.

A. Chahardehi, Structural integrity of co2 transport pipelines?a review, In Key Engineering Materials, vol.488, issue.5, pp.779-782, 2012.

I. Milne, O. Robert, . Ritchie, L. Bhushan, and . Karihaloo, Comprehensive Structural Integrity : Cyclic loading and fatigue, 2003.

W. Maxey, . Kiefner, A. Eiber, and . Duffy, Ductile Fracture Initiation, Propagation, and Arrest in Cylindrical Vessels, Astm stp, vol.514, issue.143, pp.70-81, 1972.
DOI : 10.1520/STP38819S

E. Sugie, . Matsuoka, . Akiyama, Y. Mimura, and . Kawaguchi, A Study of Shear Crack Propagation in Gas-Pressurized Pipelines, Journal of Pressure Vessel Technology, vol.104, issue.4, pp.338-343, 1982.
DOI : 10.1115/1.3264226

J. Kiefner, . Wa-maxey, A. Eiber, and . Duffy, Failure Stress Levels of Flaws in Pressurized Cylinders, ASTM special technical publication, issue.536 6, pp.461-481, 1973.
DOI : 10.1520/STP49657S

. Anon, Pipeline research committee of the american gas association. proceedings of the symposia on line pipe research

G. Re, . Pistone, G. Vogt, and . Demofonti, Eprg recommendation for crack arrest toughness for high strength line pipe steels. 3 R INTERNATIONAL, pp.607-607, 1995.

R. Higuchi, H. Makino, and I. Takeuchi, New concept and test method on running ductile fracture arrest for high pressure gas pipeline, 24th World Gas Conference, pp.2730-2737, 2009.

F. Bron, J. Besson, and A. Pineau, Ductile rupture in thin sheets of two grades of 2024 aluminum alloy, Materials Science and Engineering: A, vol.380, issue.1-2, pp.356-364, 2004.
DOI : 10.1016/j.msea.2004.04.008

URL : https://hal.archives-ouvertes.fr/hal-00144979

W. Garrison and N. Moody, Ductile fracture, Journal of Physics and Chemistry of Solids, vol.48, issue.11, pp.1035-1074, 1987.
DOI : 10.1016/0022-3697(87)90118-1

A. Benzerga and J. Leblond, Ductile fracture by void growth to coalescence Advances in Applied Mechanics, pp.169-305, 2010.

M. Robert and . Mcmeeking, Finite deformation analysis of crack-tip opening in elasticplastic materials and implications for fracture, Journal of the Mechanics and Physics of Solids, vol.25, issue.5, pp.357-381, 1977.

R. James and . Rice, A path independent integral and the approximate analysis of strain concentration by notches and cracks, Journal of applied mechanics, vol.35, issue.2, pp.379-386, 1968.

J. Newman, M. James, and U. Zerbst, A review of the CTOA/CTOD fracture criterion, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.371-385, 2003.
DOI : 10.1016/S0013-7944(02)00125-X

Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, International Journal of Mechanical Sciences, vol.46, issue.1, pp.81-98, 2004.
DOI : 10.1016/j.ijmecsci.2004.02.006

J. Faleskog, X. Gao, and C. Shih, Cell model for nonlinear fracture analysis?i. micromechanics calibration, International Journal of Fracture, vol.89, issue.4, pp.355-373, 1998.
DOI : 10.1023/A:1007421420901

V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984.
DOI : 10.1016/0001-6160(84)90213-X

J. Plateau, C. Henry, and . Crussard, Quelques nouvelles applications de la microfractographie, Revue de M??tallurgie, vol.54, issue.3, pp.200-216, 1957.
DOI : 10.1051/metal/195754030200

W. Baldwin and B. Edelson, The effect of second phases on the mechanical properties of alloys, ASM TRANS Q, vol.55, issue.1, pp.230-250, 1962.

L. Ted, T. Anderson, and . Anderson, Fracture mechanics : fundamentals and applications, p.19, 2005.

R. Bourcier, . Da-koss, O. Smelser, and . Richmond, The influence of porosity on the deformation and fracture of alloys, Acta Metallurgica, vol.34, issue.12, pp.2443-2453, 1986.
DOI : 10.1016/0001-6160(86)90147-1

J. Mariage, Simulation numérique de l'endommagement ductile en formage de pièces massives, p.15, 2003.

A. Korbel and P. Martin, Microscopic versus macroscopic aspect of shear bands deformation, Acta Metallurgica, vol.34, issue.10, pp.1905-1909, 1986.
DOI : 10.1016/0001-6160(86)90249-X

R. George and . Irwin, Analysis of stresses and strains near the end of a crack traversing a plate, SPIE MILESTONE SERIES MS, vol.137, issue.16, pp.167-170, 1997.

A. Wells, Application of fracture mechanics at and beyond general yielding, British Welding Journal, vol.10, issue.11, pp.563-70, 1963.

A. Alan and . Griffith, The phenomena of rupture and flow in solids. Philosophical transactions of the royal society of london. Series A, containing papers of a mathematical or physical character, pp.163-198, 1921.

G. Irwin, Plastic zone near a crack and fracture toughness, p.17, 1997.

M. Williams, The Bending Stress Distribution at the Base of a Stationary Crack, Journal of Applied Mechanics, vol.28, issue.1, pp.78-82, 1961.
DOI : 10.1115/1.3640470

R. Hamam, Simulation de la propagation des fissures par fatigue dans les toiles des roues de train sous chargement à amplitude variable, p.18, 2006.
URL : https://hal.archives-ouvertes.fr/tel-00133413

C. Bathias and J. Baïlon, La fatigue des matériaux et des structures, p.18, 1980.

H. Westergaard, Bearing pressures and cra ; c] ;< si, Journal of applied mechanics, p.18, 1939.

D. Dugdale, Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, issue.2, pp.100-104, 1960.
DOI : 10.1016/0022-5096(60)90013-2

A. Boiler and P. Vessel-code, American society of mechanical engineers, p.18, 1998.

R. Ainsworth, The assessment of defects in structures of strain hardening material, Engineering Fracture Mechanics, vol.19, issue.4, pp.633-642, 1984.
DOI : 10.1016/0013-7944(84)90096-1

G. Pluvinage, Notch effect and effective stress in high-cycle fatigue. Présenté par le laboratoire de fiabilité mécanique, p.18, 1999.

R. Peterson, Notch sensitivity. Metal fatigue, pp.293-306, 1959.

T. Anderson, Two-Parameter Fracture Mechanics: A Comparison of Continuum and Micromechanics Approaches, Fracture of Engineering Materials and Structures, pp.767-772, 1991.
DOI : 10.1007/978-94-011-3650-1_114

M. Williams, Stress singularities resulting from various boundary conditions, Journal of Applied Mechanics, vol.19, issue.19, pp.526-528, 1952.

P. Noel, C. Dowd, and . Shih, Two-parameter fracture mechanics : theory and applications, ASTM SPECIAL TECHNICAL PUBLICATION, vol.1207, pp.21-21, 1994.

S. Larsson and A. Carlsson, Influence of non-singular stress terms and specimen geometry on small-scale yielding at crack tips in elastic-plastic materials, Journal of the Mechanics and Physics of Solids, vol.21, issue.4, pp.263-277, 1973.
DOI : 10.1016/0022-5096(73)90024-0

Y. Lee, Fatigue testing and analysis : theory and practice, p.20, 2005.

B. Cotterell, Notes on the paths and stability of cracks, International Journal of Fracture Mechanics, vol.2, issue.3, pp.526-533, 1966.
DOI : 10.1007/BF00193691

B. Cotterell and J. Rice, Slightly curved or kinked cracks, International Journal of Fracture, vol.2, issue.2, pp.155-169, 1980.
DOI : 10.1007/BF00012619

M. David and . Parks, A stiffness derivative finite element technique for determination of crack tip stress intensity factors, International Journal of fracture, vol.10, issue.4, pp.487-502, 1974.

F. Bron and J. Besson, Simulation of the ductile tearing for two grades of 2024 aluminum alloy thin sheets, Engineering Fracture Mechanics, vol.73, issue.11, pp.1531-1552, 2006.
DOI : 10.1016/j.engfracmech.2006.01.024

URL : https://hal.archives-ouvertes.fr/hal-00136710

W. Brocks, K. Schwalbe, and U. Zerbst, Structural Integrity Assessment of Thin-Walled Structures, Advanced Engineering Materials, vol.26, issue.5, pp.319-327, 2006.
DOI : 10.1115/1.3443401

U. Zerbst, M. Heinimann, C. D. Donne, and D. Steglich, Fracture and damage mechanics modelling of thin-walled structures ??? An overview, Engineering Fracture Mechanics, vol.76, issue.1, pp.5-43, 2009.
DOI : 10.1016/j.engfracmech.2007.10.005

J. Besson, Continuum Models of Ductile Fracture: A Review, International Journal of Damage Mechanics, vol.121, issue.1, p.23, 2009.
DOI : 10.1016/S0013-7944(00)00055-2

URL : https://hal.archives-ouvertes.fr/hal-00550957

A. Frank and . Mcclintock, A criterion for ductile fracture by the growth of holes, Journal of applied mechanics, vol.35, issue.21, pp.363-371, 1968.

J. , R. , and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields, Journal of the Mechanics and Physics of Solids, vol.17, issue.21, pp.201-217, 1969.

Y. Huang, Accurate Dilatation Rates for Spherical Voids in Triaxial Stress Fields, Journal of Applied Mechanics, vol.58, issue.4, pp.1084-1086, 1991.
DOI : 10.1115/1.2897686

L. Arthur and . Gurson, Continuum theory of ductile rupture by void nucleation and growth : Part i?yield criteria and flow rules for porous ductile media, Journal of engineering materials and technology, vol.99, issue.22, pp.2-15, 1977.

V. Tvergaard, On localization in ductile materials containing spherical voids, International Journal of Fracture, vol.18, issue.4, pp.237-252, 1982.

M. Springmann and M. Kuna, Identification of material parameters of the Gurson???Tvergaard???Needleman model by combined experimental and numerical techniques, Computational Materials Science, vol.32, issue.3-4, pp.544-552, 2005.
DOI : 10.1016/j.commatsci.2004.09.010

L. Xia, J. W. Fong-shih, and . Hutchinson, A computational approach to ductile crack growth under large scale yielding conditions, Journal of the Mechanics and Physics of Solids, vol.43, issue.3, pp.389-413, 1995.
DOI : 10.1016/0022-5096(94)00069-H

R. Becker, . Needleman, V. Richmond, and . Tvergaard, Void growth and failure in notched bars, Journal of the Mechanics and Physics of Solids, vol.36, issue.3, pp.317-351, 1988.
DOI : 10.1016/0022-5096(88)90014-2

A. Nonn and C. Kalwa, Modelling of damage behaviour of high strength pipeline steel, Proceedings of European Conference on Fracture (ECF 18), p.24, 2010.

Y. Wu-youyou, L. Hailiang, and . Cheng, Transition of ductile and brittle fracture during dwtt by fem, ICF13, p.24, 2013.

I. Scheider, A. Nonn, A. Völling, C. Mondry, and . Kalwa, A Damage Mechanics based Evaluation of Dynamic Fracture Resistance in Gas Pipelines, Procedia Materials Science, vol.3, pp.1956-1964, 2014.
DOI : 10.1016/j.mspro.2014.06.315

J. Kim, G. Zhang, and X. Gao, Modeling of ductile fracture: Application of the mechanism-based concepts, International Journal of Solids and Structures, vol.44, issue.6, pp.1844-1862, 2007.
DOI : 10.1016/j.ijsolstr.2006.08.028

Z. Zhang, C. Thaulow, and J. Ødegård, A complete Gurson model approach for ductile fracture, Engineering Fracture Mechanics, vol.67, issue.2, pp.155-168, 2000.
DOI : 10.1016/S0013-7944(00)00055-2

M. Lazar and . Kachanov, Rupture time under creep conditions, International journal of fracture, vol.97, issue.1-4, pp.11-18, 1999.

J. Lemaitre, A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, issue.1, pp.83-89, 1985.
DOI : 10.1115/1.3225775

L. Bourgeon, Etude et modélisation des mécanismes d'endommagement en forge à froid, p.25, 2009.

J. Lemaitre, J. Chaboche, A. Benallal, and R. Desmorat, Mécanique des matériaux solides-3eme édition. Dunod, p.25, 2009.

J. Lemaitre and J. Chaboche, Mechanics of solid materials, p.25, 1994.

G. Rousselier, Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, issue.1, pp.97-111, 1987.
DOI : 10.1016/0029-5493(87)90234-2

G. Rousselier, Dissipation in porous metal plasticity and ductile fracture, Journal of the Mechanics and Physics of Solids, vol.49, issue.8, pp.1727-1746, 2001.
DOI : 10.1016/S0022-5096(01)00013-8

N. Bonora, A nonlinear CDM model for ductile failure, Engineering Fracture Mechanics, vol.58, issue.1-2, pp.11-28, 1997.
DOI : 10.1016/S0013-7944(97)00074-X

N. Bonora, D. Gentile, G. Pirondi, and . Newaz, Ductile damage evolution under triaxial state of stress: theory and experiments, International Journal of Plasticity, vol.21, issue.5, pp.981-1007, 2005.
DOI : 10.1016/j.ijplas.2004.06.003

Z. Zou and S. Reid, Wavy-edged fractures in axially split aluminium tubes, International Journal of Solids and Structures, vol.42, issue.16-17, pp.4519-4540, 2005.
DOI : 10.1016/j.ijsolstr.2005.01.016

. Grigory-isaakovich and . Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture Advances in applied mechanics, pp.55-129, 1962.

A. Hillerborg, M. Modéer, and P. Petersson, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, pp.773-781, 1976.
DOI : 10.1016/0008-8846(76)90007-7

V. Tvergaard, Effect of fibre debonding in a whisker-reinforced metal. Materials science and engineering : A, pp.203-213, 1990.

V. Tvergaard, W. John, and . Hutchinson, The relation between crack growth resistance and fracture process parameters in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.40, issue.6, pp.1377-1397, 1992.
DOI : 10.1016/0022-5096(92)90020-3

X. Xu and A. Needleman, Void nucleation by inclusion debonding in a crystal matrix, Modelling and Simulation in Materials Science and Engineering, vol.1, issue.2, pp.111-138, 1993.
DOI : 10.1088/0965-0393/1/2/001

T. Godofredo, M. Camacho, and . Ortiz, Computational modelling of impact damage in brittle materials, International Journal of solids and structures, vol.33, issue.20, pp.2899-2938, 1996.

I. Scheider and W. Brocks, Cohesive elements for thin-walled structures, Computational Materials Science, vol.37, issue.1-2, pp.101-109, 2006.
DOI : 10.1016/j.commatsci.2005.12.042

C. Chen, . Kolednik, . Scheider, . Siegmund, F. Tatschl et al., On the determination of the cohesive zone parameters for the modeling of micro-ductile crack growth in thick specimens, International Journal of Fracture, vol.120, issue.3, pp.517-536, 2003.
DOI : 10.1023/A:1025426121928

C. Chen, . Kolednik, F. Heerens, and . Fischer, Three-dimensional modeling of ductile crack growth: Cohesive zone parameters and crack tip triaxiality, Engineering Fracture Mechanics, vol.72, issue.13, pp.2072-2094, 2005.
DOI : 10.1016/j.engfracmech.2005.01.008

T. Dinh-cuong, Interaction rupture-flambage, le cas du «splitting» de tube métallique : Approche expérimentale et numérique, pp.28-128, 2013.

J. Krafft, R. Sullivan, and . Boyle, Effect of dimensions on fast fracture instability of notched sheets, Proceedings of the crack propagation symposium, pp.8-28, 1961.

R. George, J. Irwin, and . Kies, Critical energy rate analysis of fracture strength, SPIE MILESTONE SERIES MS, vol.137, pp.136-141, 1993.

P. O-'donoghue, C. Mf-kanninen, . Leung, S. Demofonti, and . Venzi, The development and validation of a dynamic fracture propagation model for gas transmission pipelines, International Journal of Pressure Vessels and Piping, vol.70, issue.1, pp.11-25, 1997.
DOI : 10.1016/S0308-0161(96)00012-9

W. Roy, D. Hampton, and . Nelson, Stable crack growth and instability prediction in thin plates and cylinders, Engineering Fracture Mechanics, vol.70, issue.3, pp.469-491, 2003.

M. Kanninen and P. Donoghue, Research challenges arising from current and potential applications of dynamic fracture mechanics to the integrity of engineering structures, International Journal of Solids and Structures, vol.32, issue.17-18, pp.2423-2445, 1995.
DOI : 10.1016/0020-7683(94)00275-2

H. Andersson, A finite-element representation of stable crack-growth, Journal of the Mechanics and Physics of Solids, vol.21, issue.5, pp.337-356, 1973.
DOI : 10.1016/0022-5096(73)90004-5

J. Heerens and M. Schödel, On the determination of crack tip opening angle, CTOA, using light microscopy and ??5 measurement technique, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.417-426, 2003.
DOI : 10.1016/S0013-7944(02)00128-5

D. Dawicke and M. Sutton, CTOA and crack-tunneling measurements in thin sheet 2024-T3 aluminum alloy, Experimental Mechanics, vol.98, issue.4, pp.357-368, 1994.
DOI : 10.1016/0013-7944(92)90153-6

W. R. , L. , and F. Mcclintock, Microtopography for ductile fracture process characterization part 2 : application for ctoa analysis, Engineering fracture mechanics, vol.70, issue.32, pp.403-415, 2003.

A. Pirondi and D. Fersini, Simulation of ductile crack growth in thin panels using the crack tip opening angle, Engineering Fracture Mechanics, vol.76, issue.1, pp.88-100, 2009.
DOI : 10.1016/j.engfracmech.2008.05.008

S. Xu, W. Petri, and . Tyson, Evaluation of CTOA from load vs. load-line displacement for C(T) specimen, Engineering Fracture Mechanics, vol.76, issue.13, pp.2126-2134, 2009.
DOI : 10.1016/j.engfracmech.2009.06.004

S. Xu, W. Bouchard, and . Tyson, Simplified single-specimen method for evaluating CTOA, Engineering Fracture Mechanics, vol.74, issue.15, pp.2459-2464, 2007.
DOI : 10.1016/j.engfracmech.2006.11.013

S. Mahmoud and K. Lease, The effect of specimen thickness on the experimental characterization of critical crack-tip-opening angle in 2024-T351 aluminum alloy, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.443-456, 2003.
DOI : 10.1016/S0013-7944(02)00130-3

D. Dawicke, M. Sutton, J. Newman, and C. Bigelow, Measurement and Analysis of Critical CTOA for an Aluminum Alloy Sheet, ASTM special technical publication, vol.1220, issue.106, pp.358-358, 1995.
DOI : 10.1520/STP14604S

A. Gullerud, . Dodds, D. Hampton, and . Dawicke, Three-dimensional modeling of ductile crack growth in thin sheet metals: computational aspects and validation, Engineering Fracture Mechanics, vol.63, issue.4, pp.347-374, 1999.
DOI : 10.1016/S0013-7944(99)00034-X

M. James and J. Newman, The effect of crack tunneling on crack growth: experiments and CTOA analyses, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.457-468, 2003.
DOI : 10.1016/S0013-7944(02)00131-5

C. Vincent-le, Etude de la compétition déchirure ductile/rupture fragile : Application à la tenue mécanique des tubes en acier C-Mn et de leurs joints soudés, p.34, 2006.

O. Mohand, . Ouali, A. Madjid, N. Eddine, and H. , Numerical and experimental study of ductile fracture of an aluminium alloy during forging process, p.34

I. Scheider, . Schödel, W. Brocks, and . Schönfeld, Crack propagation analyses with CTOA and cohesive model: Comparison and experimental validation, Engineering Fracture Mechanics, vol.73, issue.2, pp.252-263, 2006.
DOI : 10.1016/j.engfracmech.2005.04.005

D. Jadhav and S. Maiti, Characterization of stable crack growth through AISI 4340 steel using cohesive zone modeling and CTOD/CTOA criterion, Nuclear Engineering and Design, vol.240, issue.4, pp.713-721, 2010.
DOI : 10.1016/j.nucengdes.2009.11.042

B. Fishman, International Standardization of Boilers and Pressure Vessels, Journal of Pressure Vessel Technology, vol.96, issue.2, pp.137-139, 1974.
DOI : 10.1115/1.3454152

W. Maxey, Dynamic crack propagation in line pipe Sijthoff and Noordhoff, pp.109-123, 1981.

M. Civallero, G. Mirabile, and . Sih, Fracture mechanics in pipeline technology Analytical and Experimental Fracture Mechanics, pp.157-174, 1981.

C. Greenshields and P. Leevers, Correlation between full scale and small scale steady state (S4) tests for rapid crack propagation in plastic gas pipe, Plastics, Rubber and Composites, vol.26, issue.1, pp.20-25, 1999.
DOI : 10.1016/0013-7944(92)90049-K

G. Lawrence, S. Copley, and . Jr, A longitudinal crack in a cylindrical shell under internal pressure, International Journal of Fracture Mechanics, vol.5, issue.38, pp.117-131, 1969.

E. Folias, On the theory of fracture of curved sheets, Engineering Fracture Mechanics, vol.2, issue.2, pp.151-164, 1970.
DOI : 10.1016/0013-7944(70)90019-6

J. Goodier and F. Field, Plastic energy dissipation in crack propagation. Fracture of solids, p.38, 1963.

G. Hahn, A. Sarrate, and . Rosenfield, Criteria for crack extension in cylindrical pressure vessels, International Journal of Fracture Mechanics, vol.5, issue.3, pp.187-210, 1969.
DOI : 10.1007/BF00184612

T. Hara, Y. Shinohara, Y. Terada, and H. Asahi, Dwtt properties for high strength line pipe steels, The Eighteenth International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers, p.147, 2008.

H. Makino, T. Kubo, T. Shiwaku, S. Endo, T. Inoue et al., Prediction for Crack Propagation and Arrest of Shear Fracture in Ultra-high Pressure Natural Gas Pipelines., ISIJ International, vol.41, issue.4, pp.381-388, 2001.
DOI : 10.2355/isijinternational.41.381

S. Hong, S. Y. Shin, S. Lee, J. Nack, and . Kim, Effects of Specimen Thickness and Notch Shape on Fracture Modes in the Drop Weight Tear Test of API X70 and X80 Linepipe Steels, Metallurgical and Materials Transactions A, vol.12, issue.9, pp.2619-2632, 2011.
DOI : 10.1179/030634578790433332

I. Satoshi, M. Ryuji, and M. Katsumi, Safety and integrity assessment technology for linepipe, p.45

G. Wilkowski, . Rudland, N. Xu, and . Sanderson, Effect of Grade on Ductile Fracture Arrest Criteria for Gas Pipelines, Volume 3: Materials and Joining; Pipeline Automation and Measurement; Risk and Reliability, Parts A and B, pp.369-384, 2006.
DOI : 10.1115/IPC2006-10350

G. Mannucci and A. Franchi, Fracture properties of API X100 gas pipeline steels, p.143, 2002.

S. Papka, . Stevens, . Macia, . Fairchild, and . Petersen, Full-size testing and analysis of x120 linepipe, International Journal of Offshore and Polar Engineering, issue.01, pp.14-48, 2004.

G. Wilkowski, M. Maxey, and R. Eiber, Api drop weight tear test round robin testing program, L51471), p.143, 1985.

. Wa-poynton, G. Shannon, and . Fearnehough, The Design and Application of Shear Fracture Propagation Studies, Journal of Engineering Materials and Technology, vol.96, issue.4, pp.323-329, 1974.
DOI : 10.1115/1.3443248

W. Pellini, Principles of fracture-safe design. pt. 2, WELD J, vol.50, issue.4, pp.147-50, 1971.

W. Poynton and G. Fearnehough, An analysis of shear fracture propagation in gas pipelines, Proceedings of an international conference on Dynamic Crack Propagation, pp.183-196, 1973.
DOI : 10.1007/978-94-010-9253-1_12

D. Harris and C. , Suitability evaluation of x100 steel pipes for high pressure gas transportation pipelines by full scale tests, p.51

T. Luu, Déchirure ductile des aciers a haute résistance pour gazoducs (X100), p.51, 2006.

G. Hahn, . Sarrate, A. Mf-kanninen, and . Rosenfield, A model for unstable shear crack propagation in pipes containing gas pressure, International Journal of Fracture, vol.5, issue.2, pp.209-222, 1973.
DOI : 10.1007/BF00187209

M. Kanninen, C. Sampath, and . Popelar, Steady-State Crack Propagation in Pressurized Pipelines Without Backfill, Journal of Pressure Vessel Technology, vol.98, issue.1, pp.56-64, 1976.
DOI : 10.1115/1.3454326

L. Freund, J. Parks, and . Rice, Running ductile fracture in a pressurized line pipe. Mechanics of crack growth, pp.243-52, 1976.

A. Emery, A. Love, and . Kobayashi, Fracture in Straight Pipes Under Large Deflection Conditions???Part I: Structural Deformations, Journal of Pressure Vessel Technology, vol.99, issue.1, pp.122-127, 1977.
DOI : 10.1115/1.3454494

A. Emery, . Love, P. Kobayashi, and . Neighbors, Crack opening and fluid pressure profiles for axial and circumferential cracks in pipes. Dynamics of Fluid- Structure Systems in the Energy Industry, pp.173-184, 1979.

A. Emery, . Kobayashi, . Love, . Bw-place, Y. Lee et al., An experimental and analytical investigation of axial crack propagation in long pipes, Engineering Fracture Mechanics, vol.23, issue.1, pp.215-226, 1986.
DOI : 10.1016/0013-7944(86)90188-8

M. Baum, The Development of the Breach Generated by Axial Rupture of a Gas-Pressurized Steel Pipe, Journal of Pressure Vessel Technology, vol.104, issue.4, pp.253-261, 1982.
DOI : 10.1115/1.3264214

. Bjl-darlaston, . Baum, . Love, A. Emery, and . Kobayashi, Coupling of the hydraulic and structural components in the analysis of axially rupturing pipes, ASME Century, issue.2, p.52, 1980.

A. Emery, . Perl, A. Love, and . Kobayashi, On the Motion of an Axial Through Crack in a Pipe, Journal of Pressure Vessel Technology, vol.103, issue.3, pp.281-286, 1981.
DOI : 10.1115/1.3263402

Y. Nara, . Nozaki, M. Takeuchi, T. Fukuda, and . Koga, Study on resistivity of various types of steels against propagating shear fracture by modified west jefferson type burst test, In MECHANICAL ENGINEERING, vol.100, pp.120-120

F. Mel, . Kanninen, . Leung, . Pe-o-'donoghue, C. Morrow et al., The development of a ductile pipe fracture model, Report submitted to the American Gas Association under AGA Contract PR, pp.15-527, 1992.

M. Kanninen, . Morrow, . Grant, I. Demofonti, and . Hadley, The development and validation of a ductile fracture analysis model. final report AGA contract nos, p.56, 1994.

G. Demofonti, . Buzzichelli, M. Venzi, and . Kanninen, Step by step procedure for the two specimen ctoa test, Pipeline technology, vol.2, pp.503-512, 1995.

G. Mannucci, . Buzzichelli, . Salvini, L. Eiber, and . Carlson, Ductile Fracture Arrest Assessment in a Gas Transmission Pipeline Using CTOA, Volume 1: Codes, Standards and Regulations; Design and Constructions; Environmental; GIS/Database Development; Innovative Projects and Emerging Issues, pp.315-320, 2000.
DOI : 10.1115/IPC2000-138

A. Manes, R. Porcaro, H. Ilstad, E. Levold, M. Langseth et al., The behaviour of an offshore steel pipeline material subjected to bending and stretching. Ships and Offshore Structures, pp.371-387, 2012.

. Det-norske and . Veritas, Offshore standard dnv-os-f101. Submarine pipeline systems, p.60, 2000.

V. Aune and M. Sagbakken-hovdelien, Impact against offshore pipelines : Experiments and numerical simulations, p.59, 2012.

A. Ghiotti, . Fanini, P. Bruschi, and . Bariani, Modelling of the Mannesmann effect, CIRP Annals, vol.58, issue.1, pp.255-258, 2009.
DOI : 10.1016/j.cirp.2009.03.099

A. Fragiel, . Schouwenaarf, R. Guardian, and . Perez, Microstructural characteristics of different commercially available api 5l x65 steels, Journal of New Materials for Electrochemical Systems, vol.8, issue.62, pp.115-119, 2005.

A. Sage, An overview of the use of microalloys in hsla steels with particular reference to vanadium and titanium, HSLA Steels : Processing, Properties and Applications, pp.51-60, 1990.

F. Lew, . Porter, E. Paul, and . Repas, The evolution of hsla steels, JOM, vol.34, issue.4, pp.14-21, 1982.

K. Irvine, T. Pickering, and . Gladman, Grain-refined c-mn steels, Iron Steel Inst J, vol.205, issue.2, pp.161-182, 1967.

H. Takechi, Newly developed high strength steels in japan, HSLA Steels : Processing, Properties and Applications, pp.33-36, 1990.

E. Jakobsen, Deformasjon av trykksatte rørledninger, p.123, 2013.

R. Hill, The mathematical theory of plasticity, p.65, 1998.

S. Ivan, P. Cole, S. Corrigan, N. Sim, and . Birbilis, Corrosion of pipelines used for co 2 transport in ccs : Is it a real problem ?, International Journal of Greenhouse Gas Control, vol.5, issue.4, pp.749-756, 2011.

H. Kobayashi and H. Onoue, Brittle fracture of liberty ships, Failure Knowledge Database, vol.100, p.67, 1943.

G. Pluvinage, General approaches of pipeline defect assessment In Safety, Reliability and Risks associated with water, oil and Gas pipelines, pp.1-22, 2008.

M. Hadj-meliani, G. Yu, G. Matvienko, and . Pluvinage, Corrosion defect assessment on pipes using limit analysis and notch fracture mechanics, Engineering Failure Analysis, vol.18, issue.1, pp.271-283, 2011.
DOI : 10.1016/j.engfailanal.2010.09.006

G. Pluvinage, . Ben-amara, Z. Capelle, and . Azari, Role of Constraint on Ductile Brittle Transition Temperature of Pipe Steel X65, Procedia Materials Science, vol.3, pp.1560-1565, 2014.
DOI : 10.1016/j.mspro.2014.06.252

C. Matthews, A Quick Guide to API 510 Certified Pressure Vessel Inspector Syllabus : Example Questions and Worked Answers, p.73, 2010.

W. Oldfield, Development of Fracture Toughness Reference Curves, Journal of Engineering Materials and Technology, vol.102, issue.1, pp.107-117, 1980.
DOI : 10.1115/1.3224767

E. Asm, 208-95a : Standard test method for conducting drop-weight test to determine nil-ductility transition temperature of ferritic steels, p.76

M. Mouwakeh, S. Pluvinage, and . Masri, Failure of water pipes containing surface cracks using limit analysis notions, Res. J. of Aleppo Univ. Engineering Science Series, issue.63, p.79, 2011.

B. Henry and A. Luxmoore, The stress triaxiality constraint and the Q-value as a ductile fracture parameter, Engineering Fracture Mechanics, vol.57, issue.4, pp.375-390, 1997.
DOI : 10.1016/S0013-7944(97)00031-3

C. Ruggieri, X. Gao, and R. Jr, Transferability of elastic???plastic fracture toughness using the Weibull stress approach: significance of parameter calibration, Engineering Fracture Mechanics, vol.67, issue.2, pp.101-117, 2000.
DOI : 10.1016/S0013-7944(00)00052-7

M. Hadj-meliani, G. Yu, G. Matvienko, and . Pluvinage, Two-parameter fracture criterion (K ??,c -T ef,c ) based on notch fracture mechanics, International Journal of Fracture, vol.64, issue.3, pp.173-182, 2011.
DOI : 10.1007/s10704-010-9542-1

M. Maleski, H. Ms-kirugulige, and . Tippur, A method for measuring mode I crack tip constraint under static and dynamic loading conditions, Experimental Mechanics, vol.33, issue.4, pp.522-532, 2004.
DOI : 10.1520/STP18042S

M. Ayatollahi, D. Pavier, and . Smith, Determination of t-stress from finite element analysis for mode i and mixed mode i/ii loading, International Journal of Fracture, vol.91, issue.3, pp.283-298, 1998.
DOI : 10.1023/A:1007581125618

B. Yang and K. Ravi-chandar, Evaluation of elastic T-stress by the stress difference method, Engineering Fracture Mechanics, vol.64, issue.5, pp.589-605, 1999.
DOI : 10.1016/S0013-7944(99)00082-X

H. Adib, C. Jallouf, . Schmitt, G. Carmasol, and . Pluvinage, Evaluation of the effect of corrosion defects on the structural integrity of X52 gas pipelines using the SINTAP procedure and notch theory, International Journal of Pressure Vessels and Piping, vol.84, issue.3, pp.123-131, 2007.
DOI : 10.1016/j.ijpvp.2006.10.005

M. Hadj-meliani, . Azari, J. Pluvinage, and . Capelle, Gouge Assessment for Pipes and Associated Transferability Problem, Defect and Diffusion Forum, vol.294, issue.85, pp.1117-1126, 2010.
DOI : 10.4028/www.scientific.net/DDF.294.15

A. Nussbaumer, L. Borges, and L. Davaine, Fatigue Design of Steel and Composite Structures : Eurocode 3 : Design of Steel Structures, Part 1-9 Fatigue ; Eurocode 4 : Design of Composite Steel and Concrete Structures, p.85, 2012.
DOI : 10.1002/9783433601181

P. Ph, . Darcis, . Cn-mccowan, . Windhoff, T. Mccolskey et al., Crack tip opening angle optical measurement methods in five pipeline steels, Engineering Fracture Mechanics, vol.75, issue.100, pp.2453-2468, 2008.

A. Martinelli and S. Venzi, Tearing modulus, J-integral, CTOA and crack profile shape obtained from the load-displacement curve only, Engineering Fracture Mechanics, vol.53, issue.2, pp.263-277, 1996.
DOI : 10.1016/0013-7944(95)00100-X

T. Kobayashi, On the information about fracture characteristics obtained from instrumented impact test of A533 steel for reactor pressure vessel, Engineering Fracture Mechanics, vol.19, issue.1, pp.67-79, 1984.
DOI : 10.1016/0013-7944(84)90069-9

P. Lam, Y. Kim, and Y. Chao, The non-constant ctod/ctoa in stable crack extension under plane-strain conditions. Engineering fracture mechanics, pp.1070-1085, 2006.

S. Hashemi, . Gay, . Ic-howard, R. Yates, and . Andrews, 3392-experimental determination of ctoa toughness, ICF11, Italy 2005, p.93, 2013.

S. Hashemi, . Gay, . Ic-howard, J. Andrews, and . Yates, Development of a laboratory test technique for direct estimation of crack tip opening angle, 15th European Conference of Fracture, p.93, 2004.

S. Mahmoud and K. Lease, Two-dimensional and three-dimensional finite element analysis of critical crack-tip-opening angle in 2024-T351 aluminum alloy at four thicknesses, Engineering Fracture Mechanics, vol.71, issue.9-10, pp.1379-1391, 2004.
DOI : 10.1016/S0013-7944(03)00167-X

L. Pussegoda, . Verbit, . Dinovitzer, . Tyson, . Glover et al., Review of CTOA as a Measure of Ductile Fracture Toughness, Volume 1: Codes, Standards and Regulations; Design and Constructions; Environmental; GIS/Database Development; Innovative Projects and Emerging Issues, pp.247-254, 2000.
DOI : 10.1115/IPC2000-131

J. Heerens and M. Schoedel, Characterization of stable crack extension in aluminium sheet material using the crack tip opening angle determined optically and by the ??5 clip gauge technique, Engineering Fracture Mechanics, vol.76, issue.1, pp.101-113, 2009.
DOI : 10.1016/j.engfracmech.2008.04.009

L. Ma, . Lam, A. Kokaly, and . Kobayashi, CTOA of a stable crack in a thin aluminum fracture specimen, Engineering Fracture Mechanics, vol.70, issue.3-4, pp.427-442, 2003.
DOI : 10.1016/S0013-7944(02)00129-7

R. Reuven, . Mccowan, . Drexler, P. Shtechman, . Darcis et al., CTOA Results for X65 and X100 Pipeline Steels: Influence of Displacement Rate, 2008 7th International Pipeline Conference, Volume 3, pp.279-286, 2008.
DOI : 10.1115/IPC2008-64363

S. Xu, . Tyson, . Eagleson, . Cn-mccowan, . Es-drexler et al., Measurement of CTOA of Pipe Steels Using MDCB and DWTT Specimens, 2010 8th International Pipeline Conference, Volume 2, pp.269-278, 2010.
DOI : 10.1115/IPC2010-31076

J. Fang, J. Zhang, and L. Wang, Evaluation of cracking behavior and critical CTOA values of pipeline steel from DWTT specimens, Engineering Fracture Mechanics, vol.124, issue.125, pp.18-29, 2014.
DOI : 10.1016/j.engfracmech.2014.04.031

K. Kodancha and S. Kudari, Variation of stress intensity factor and elastic t-stress along the crack-front in finite thickness plates. Fracture and Structural Integrity, pp.45-108, 2009.

A. Documentation, Abaqus analysis user's manual, Materials. Other plasticity models. Concrete, p.113, 2010.

F. Oikonomidis, C. Shterenlikht, and . Truman, Prediction of crack propagation and arrest in X100 natural gas transmission pipelines with the strain rate dependent damage model (SRDD). Part 1: A novel specimen for the measurement of high strain rate fracture properties and validation of the SRDD model parameters, International Journal of Pressure Vessels and Piping, vol.105, issue.106, pp.60-68, 2013.
DOI : 10.1016/j.ijpvp.2013.03.003

R. Eiber, W. Bubenik, and . Maxey, Gasdecom, computer code for the calculation of gas decompression speed that is included in fracture control technology for natural gas pipelines. ng-18 report 208, American Gas Association Catalog1993, p.134, 1993.

A. Cosham, J. Robert, . Eiber, B. Edward, and . Clark, GASDECOM: Carbon Dioxide and Other Components, 2010 8th International Pipeline Conference, Volume 2, pp.777-794, 2010.
DOI : 10.1115/IPC2010-31572

C. Cen, Characterization and Calculation of Fracture Toughness for High Grade Pipes, p.136, 2013.

G. Demofonti, . Mannucci, D. Hg-hillenbrand, and . Harris, Evaluation of the Suitability of X100 Steel Pipes for High Pressure Gas Transportation Pipelines by Full Scale Tests, 2004 International Pipeline Conference, Volumes 1, 2, and 3, p.143, 2003.
DOI : 10.1115/IPC2004-0145

S. Hashemi, . Ic-howard, R. Yates, and . Andrews, Experimental Investigation of Slant Crack Propagation in X100 Pipeline Steel, Fracture of Nano and Engineering Materials and Structures, pp.151-152, 2006.
DOI : 10.1007/1-4020-4972-2_73