L. Adler, J. H. Rose, and C. Mobley, Ultrasonic method to determine gas porosity in aluminum alloy castings: Theory and experiment, Journal of Applied Physics, vol.9, issue.12, p.336, 1986.
DOI : 10.1121/1.390577

P. K. Agarwal, O. Neill, and B. K. , Transport phenomena in multi-particle systems???I. Pressure drop and friction factors: Unifying the hydraulic-radius and submerged-object approaches, Chemical Engineering Science, vol.43, issue.9, pp.2487-2499, 1988.
DOI : 10.1016/0009-2509(88)85183-2

P. Anyalebechi, An updated review of techniques for determination of hydrogen content in aluminium and its alloys, Foundry Trade Journal, vol.7, pp.258-269, 1993.

P. N. Anyalebechi, Analysis of the effects of alloying elements on hydrogen solubility in liquid aluminum alloys, Scripta Metallurgica et Materialia, vol.33, issue.8, pp.1209-1216, 1995.
DOI : 10.1016/0956-716X(95)00373-4

P. N. Anyalebechi, Attempt to predict hydrogen solubility limits in liquid multicomponent aluminum alloys, Scripta Materialia, vol.34, issue.4, pp.513-517, 1996.
DOI : 10.1016/1359-6462(95)00591-9

P. N. Anyalebechi, Critical review of reported values of hydrogen diffusion in solid and liquid aluminum and its alloys, Light Met, pp.857-872, 2003.

B. Appolaire, Prise en compte du mouvement des cristaux équiaxes dans la modélisation de la solidification des lingots d'acier coulés en fonderie, 1999.

B. Appolaire, H. Combeau, and G. Lesoult, Modeling of equiaxed growth in multicomponent alloys accounting for convection and for the globular/dendritic morphological transition, Materials Science and Engineering: A, vol.487, issue.1-2, pp.33-45, 2008.
DOI : 10.1016/j.msea.2007.11.030

A. Association, International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys, The Aluminum Association, 2006.

R. C. Atwood and P. D. Lee, A three-phase model of hydrogen pore formation during the equiaxed dendritic solidification of aluminum-silicon alloys, Metallurgical and Materials Transactions B, vol.65, issue.2, pp.209-221, 2002.
DOI : 10.2464/jilm.45.278

R. C. Atwood and P. D. Lee, Simulation of the three-dimensional morphology of solidification porosity in an aluminium???silicon alloy, Acta Materialia, vol.51, issue.18, pp.5447-5466, 2003.
DOI : 10.1016/S1359-6454(03)00411-7

R. C. Atwood, S. Sridhar, and P. D. Lee, Equations for nucleation of hydrogen gas pores during solidification of aluminium seven weight percent silicon alloy, Scripta Materialia, vol.41, issue.12, pp.1255-1259, 1999.
DOI : 10.1016/S1359-6462(99)00297-3

R. C. Atwood, S. Sridhar, W. Zhang, and P. D. Lee, Diffusion-controlled growth of hydrogen pores in aluminium???silicon castings: in situ observation and modelling, Acta Materialia, vol.48, issue.2, pp.405-417, 2000.
DOI : 10.1016/S1359-6454(99)00363-8

M. Bedel, Étude De La Formation Des Structures De Solidification Et Des Macroségrégations En Coulée Semi-Continue D'Aluminium, 2014.

M. Bedel, K. Tveito, M. Zalo?nik, H. Combeau, M. Hamdi et al., A model study of the impact of the transport of inoculant particles on microstructure formation during solidification, Computational Materials Science, vol.102, pp.95-109, 2015.
DOI : 10.1016/j.commatsci.2015.01.028

URL : https://hal.archives-ouvertes.fr/hal-01291762

D. Bernard, Y. Nielsen, L. Salvo, and P. Cloetens, Permeability assessment by 3D interdendritic flow simulations on microtomography mappings of Al???Cu alloys, Materials Science and Engineering: A, vol.392, issue.1-2, pp.112-120, 2005.
DOI : 10.1016/j.msea.2004.09.004

URL : https://hal.archives-ouvertes.fr/hal-00022098

K. D. Carlson, Z. Lin, and C. Beckermann, Modeling the Effect of Finite-Rate Hydrogen Diffusion on Porosity Formation in Aluminum Alloys, Metallurgical and Materials Transactions B, vol.43, issue.7, pp.541-555, 2007.
DOI : 10.2464/jilm.43.385

D. Carpentier, Modélisation de la formation des microporosités lors de la solidification d'alliages à base d'aluminium, 1994.

C. Charbon and M. Rappaz, 3D probabilistic modelling of equiaxed eutectic solidification, Modelling and Simulation in, Materials Science and Engineering, vol.1, p.455, 1993.

J. Chauchat, Contribution à la modélisation diphasique du transport sédimentaire en milieux côtiers et estuariens, 2007.

Y. Chen, Relationship between Ultrasonic Characteristics and Relative Porosity in Al and Al-XSi Alloys, MATERIALS TRANSACTIONS, vol.50, issue.9, pp.2308-2313, 2009.
DOI : 10.2320/matertrans.M2009179

Y. Chen, Ultrasonic Evaluation of the Quality of A356.2 Alloy by Fluxing Treatment, MATERIALS TRANSACTIONS, vol.51, issue.4, pp.803-809, 2010.
DOI : 10.2320/matertrans.M2009416

G. Couturier and M. Rappaz, Modeling of Porosity Formation in Multicomponent Alloys in the Presence of Several Dissolved Gases and Volatile Solute Elements, Simul. Alum. Shape Cast. Process, pp.143-152, 2006.

D. Dispinar and J. Campbell, Critical assessment of reduced pressure test. Part 1: Porosity phenomena, International Journal of Cast Metals Research, vol.14, issue.5, pp.280-286, 2004.
DOI : 10.1080/13640461.2002.11819451

Q. Du, D. G. Eskin, and L. Katgerman, Modeling Macrosegregation during Direct-Chill Casting of Multicomponent Aluminum Alloys, Metallurgical and Materials Transactions A, vol.43, issue.414, pp.180-189, 2007.
DOI : 10.1016/j.msea.2005.09.012

D. Emadi and J. Gruzleski, Effects of Casting and Melt Variables on Porosity in Directionally-Solidified Al-Si Alloys (94-95), Transactions of the American Foundrymen's, Society, vol.102, pp.307-312, 1994.

D. Emadi, J. E. Gruzleski, and J. M. Toguri, The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation, Metallurgical Transactions B, vol.236, issue.9, pp.1055-1063, 1993.
DOI : 10.1179/095066068790421674

E. Escobar-de-obaldia and S. D. Felicelli, Quantitative prediction of microporosity in aluminum alloys, Journal of Materials Processing Technology, vol.191, issue.1-3, pp.265-269, 2007.
DOI : 10.1016/j.jmatprotec.2007.03.072

D. G. Eskin, Physical metallurgy of direct chill casting of aluminum alloys, 2008.
DOI : 10.1201/9781420062823

D. G. Eskin, V. I. Savran, and L. Katgerman, Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al-Cu Alloy, Metallurgical and Materials Transactions A, vol.36, issue.9, pp.2561-2561, 2005.
DOI : 10.1007/s11661-005-0132-1

D. G. Eskin, J. Zuidema, V. I. Savran, and L. Katgerman, Structure formation and macrosegregation under different process conditions during DC casting, Materials Science and Engineering: A, vol.384, issue.1-2, pp.232-244, 2004.
DOI : 10.1016/j.msea.2004.05.066

Q. Fang and D. Granger, Porosity formation in modified and unmodified A356 alloy castings, AFS Trans, vol.97, pp.989-1000, 1989.

M. Felberbaum, Porosity in Aluminum Alloys : Visualization , Characterization , and Modeling, 2010.

M. Felberbaum, E. Landry-désy, L. Weber, and M. Rappaz, Effective hydrogen diffusion coefficient for solidifying aluminium alloys, Acta Materialia, vol.59, issue.6, pp.2302-2308, 2011.
DOI : 10.1016/j.actamat.2010.12.022

M. Felberbaum and M. Rappaz, Curvature of micropores in Al???Cu alloys: An X-ray tomography study, Acta Materialia, vol.59, issue.18, pp.6849-6860, 2011.
DOI : 10.1016/j.actamat.2011.07.005

T. L. Finn, M. G. Chu, and W. D. Bennon, The Influence of Mushy Region Microstructure on Macrosegregation in Direct Chill Cast Aluminum-Copper Round Ingots, Micro/Macro Scale Phenom, Solidif, vol.139, pp.17-24, 1992.

F. Frisvold, Filtration of aluminium: theory, mechanisms, and experiments, 1990.

A. Glenn, S. Russo, and P. Paterson, The effect of grain refining on macrosegregation and dendrite arm spacing of direct chill cast AA5182, Metallurgical and Materials Transactions A, vol.20, issue.1, pp.1513-1523, 2003.
DOI : 10.1007/BF02670250

J. F. Grandfield and P. T. Mcglade, DC casting of aluminium: Process behaviour and technology, Mater. Forum, vol.20, pp.29-51, 1996.

J. P. Harvey and P. Chartrand, Modeling the Hydrogen Solubility in Liquid Aluminum Alloys, Metallurgical and Materials Transactions B, vol.76, issue.2, pp.908-924, 2010.
DOI : 10.1007/BF02657486

J. Huang, J. G. Conley, and T. Mori, Simulation of microporosity formation in modified and unmodified A356 alloy castings, Metallurgical and Materials Transactions B, vol.27, issue.6, pp.1249-1260, 1998.
DOI : 10.1007/BF02670257

J. Hutt, S. John, and D. , The origins of the equiaxed zone???Review of theoretical and experimental work, International Journal of Cast Metals Research, vol.173, issue.1, pp.13-22, 1998.
DOI : 10.1016/0921-5093(93)90200-X

C. Ionescu and H. Necula, Calcul Des Propriérés Thermophysiques Des Fluides Frigoporteurs Diphasiques, U.P.B. Sci. Bull. Ser. C, vol.71, 2009.

M. Ishii, One-dimensional drift-flux model and constitutive equations for relative motion between phases in various two-phase flow regimes, 1977.
DOI : 10.2172/6871478

T. Jalanti, Etude et modélisation de la macroségrégation dans la coulée semicontinue des alliages d'aluminium, 2000.

S. Karagadde, S. Sundarraj, and P. Dutta, Modeling growth of hydrogen bubbles in aluminum castings using the level-set method, Scripta Materialia, vol.61, issue.2, pp.216-219, 2009.
DOI : 10.1016/j.scriptamat.2009.03.043

H. Karema and S. Lo, Efficiency of interphase coupling algorithms in fluidized bed conditions, Computers & Fluids, vol.28, issue.3, pp.323-360, 1999.
DOI : 10.1016/S0045-7930(98)00028-0

E. Khajeh and D. M. Maijer, Physical and numerical characterization of the near-eutectic permeability of aluminum???copper alloys, Acta Materialia, vol.58, issue.19, pp.6334-6344, 2010.
DOI : 10.1016/j.actamat.2010.07.055

J. R. Kim and R. Abbaschian, Influence of solidification variables on the microporosity formation on Al???Cu (4.5??wt%) alloy with axial heat processing, Journal of Materials Science, vol.18, issue.199, pp.6213-6223, 2011.
DOI : 10.1007/BF02658450

K. Kubo and R. D. Pehlke, Mathematical modeling of porosity formation in solidification, Metallurgical Transactions B, vol.46, issue.2, pp.359-366, 1985.
DOI : 10.2464/jilm.24.130

P. Lee and J. Hunt, Hydrogen porosity in directional solidified aluminium-copper alloys:in situ observation, Acta Materialia, vol.45, issue.10, pp.4155-4169, 1997.
DOI : 10.1016/S1359-6454(97)00081-5

P. Lee and J. Hunt, Measuring the nucleation of hydrogen porosity during the solidification of aluminium-copper alloys, Scripta Materialia, vol.36, issue.4, pp.399-404, 1997.
DOI : 10.1016/S1359-6462(96)00411-3

P. D. Lee, R. C. Atwood, R. J. Dashwood, and H. Nagaumi, Modeling of porosity formation in direct chill cast aluminum???magnesium alloys, Materials Science and Engineering: A, vol.328, issue.1-2, pp.213-222, 2002.
DOI : 10.1016/S0921-5093(01)01687-2

P. D. Lee and J. D. Hunt, Hydrogen porosity in directionally solidified aluminium???copper alloys: a mathematical model, Acta Materialia, vol.49, issue.8, pp.1383-1398, 2001.
DOI : 10.1016/S1359-6454(01)00043-X

G. Grün and P. Jarry, Equi-axed growth and related segregations in cast metallic alloys, Science and Technology of Advanced Materials, vol.2, pp.285-291, 2001.

H. Liao, W. Huang, Q. Wang, and F. Jia, Effects of Strontium, Magnesium Addition, Temperature Gradient, and Growth Velocity on Al???Si Eutectic Growth in a??Unidirectionally-solidified Al???13??wt% Si Alloy, Journal of Materials Science & Technology, vol.30, issue.2, pp.146-153, 2014.
DOI : 10.1016/j.jmst.2013.05.003

H. Liu, M. Bouchard, and L. Zhang, An experimental study of hydrogen solubility in liquid aluminium, Journal of Materials Science, vol.33, issue.17, pp.4309-4315, 1995.
DOI : 10.2464/jilm.39.235

L. Liu, M. Samuel, F. H. Samuel, H. W. Doty, and S. Valtierra, The influence of strontium on porosity formation in Al-Si alloys, Journal of Materials Science, vol.38, issue.6, pp.1255-1267, 2003.
DOI : 10.1023/A:1022870006721

A. Ludwig and M. Wu, Modeling of globular equiaxed solidification with a two-phase approach, Metallurgical and Materials Transactions A, vol.59, issue.2, pp.3673-3683, 2002.
DOI : 10.1007/BF02648984

H. Meidani, Phase-field modeling of micropore formation in a solidifying alloy, 2013.

H. Meidani, J. L. Desbiolles, . Jacot, and M. Rappaz, Three-dimensional phase-field simulation of micropore formation during solidification: Morphological analysis and pinching effect, Acta Materialia, vol.60, issue.6-7, pp.2518-2527, 2012.
DOI : 10.1016/j.actamat.2011.12.049

M. L. Melo, E. M. Rizzo, and R. G. Santos, Numerical model to predict the position, amount and size of microporosity formation in Al???Cu alloys by dissolved gas and solidification shrinkage, Materials Science and Engineering: A, vol.374, issue.1-2, pp.351-361, 2004.
DOI : 10.1016/j.msea.2004.03.009

R. Nadella, D. Eskin, and L. Katgerman, Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets, Materials Science and Technology, vol.30, issue.11, pp.1327-1335, 2007.
DOI : 10.1007/s11661-999-0334-z

R. Nadella, D. G. Eskin, Q. Du, and L. Katgerman, Macrosegregation in direct-chill casting of aluminium alloys, Progress in Materials Science, vol.53, issue.3, pp.421-480, 2008.
DOI : 10.1016/j.pmatsci.2007.10.001

R. Nadella, D. G. Eskin, and L. Katgerman, Effect of Grain Refinement on Structure Evolution, ???Floating??? Grains, and Centerline Macrosegregation in Direct-Chill Cast AA2024 Alloy Billets, Metallurgical and Materials Transactions A, vol.55, issue.521, pp.450-461, 2008.
DOI : 10.1179/mst.1997.13.8.650

H. Nagaumi, Prediction of porosity contents and examination of porosity formation in Al???4.4%Mg DC slab, Science and Technology of Advanced Materials, vol.64, issue.178, pp.49-57, 2001.
DOI : 10.1007/BF02385611

J. Ni and C. Beckermann, A volume-averaged two-phase model for transport phenomena during solidification, Metallurgical Transactions B, vol.21, issue.3, pp.349-361, 1991.
DOI : 10.1007/BF02671947

J. Ni and C. Beckermann, Modeling of globulitic alloy solidification with convection.pdf, J. Mater. Process. Manuf. Sci, vol.2, pp.217-231, 1993.

. Nielsen, B. Mo-appolaire, and H. Combeau, Measurements and modeling of the microstructural morphology during equiaxed solidification of Al-Cu alloys, Metallurgical and Materials Transactions A, vol.18, issue.8, pp.2049-2060, 2001.
DOI : 10.1007/BF02649490

E. Niyama, T. Uchida, and M. Morikawa, Predicting shrinkage in large steel castings from temperature gradient calculations, Int. Cast Met. J, vol.6, pp.16-22, 1981.

C. Pequet, M. Rappaz, and M. Gremaud, Modeling of microporosity, macroporosity, and pipe-shrinkage formation during the solidification of alloys using a mushy-zone refinement method: Applications to aluminum alloys, Metallurgical and Materials Transactions A, vol.18, issue.2, pp.2095-2106, 2002.
DOI : 10.1179/imr.1989.34.1.93

D. Pham-van-bang, E. Lefrançois, G. Ovarlez, and F. Bertrand, Mri experimental and 1d fe-fct numerical investigation of the sedimentation and consolidation, p.97, 2006.

D. Poirier and P. Ocansey, Permeability for flow of liquid through equiaxial mushy zones, Materials Science and Engineering: A, vol.171, issue.1-2, pp.231-240, 1993.
DOI : 10.1016/0921-5093(93)90410-G

D. R. Poirier, K. Yeum, and . L. Maples, A thermodynamic prediction for microporosity formation in aluminum-rich Al-Cu alloys, Metallurgical Transactions A, vol.18, issue.11, pp.1979-1987, 1987.
DOI : 10.1007/BF02668569

C. Ransley and H. Neufeld, The solubility of hydrogen in liquid and solid aluminium, Journal of the Institute of Metals, vol.74, pp.599-620, 1948.

C. Ransley and D. Talbot, Wasserstoff-Porositat in Metallen unter besonderer Berùcksichtigung des Aluminiums und seiner Legierungen, Zeitschrift fur Metallkunde, vol.46, pp.328-337, 1955.

M. Rappaz and C. Gandin, Probabilistic modelling of microstructure formation in solidification processes, Acta Metallurgica et Materialia, vol.41, issue.2, pp.345-360, 1993.
DOI : 10.1016/0956-7151(93)90065-Z

URL : https://hal.archives-ouvertes.fr/hal-01564451

A. Reddy and C. Beckermann, Simulation of the Effects of Thermosolutal Convection, Shrinkage Induced Flow, and Solid Transport on Macrosegregation and Equiaxed Grain Size Distribution in a DC Continuous Cast Al-Cu Round Ingot, Materials Processing in the Computer Age II, pp.89-102, 1995.

P. Rousset, M. Rappaz, and B. Hannrt, Modeling of inverse segregation and porosity formation in directionally solidified aluminum alloys, Metallurgical and Materials Transactions A, vol.30, issue.5, p.2349, 1995.
DOI : 10.1179/095066085790150144

A. Sabau and S. Viswanathan, Porosity prediction in aluminum A356 alloy castings, Oak Ridge, pp.597-602, 2008.

S. Saikawa, K. Nakai, Y. Sugiura, and A. Kamio, Effect of Hydrogen Gas Content on Generation of Porosity in Al–Li Casting Alloys, Materials Transactions, JIM, vol.40, issue.1, pp.57-63, 1999.
DOI : 10.2320/matertrans1989.40.57

G. K. Sigworth and T. A. Engh, Chemical and kinetic factors related to hydrogen removal from aluminum, Metallurgical Transactions B, vol.245, issue.3, pp.447-460, 1982.
DOI : 10.1007/978-1-4615-8270-0_2

D. G. Suyitno-;-eskin and L. Katgerman, Structure observations related to hot tearing of Al???Cu billets produced by direct-chill casting, Materials Science and Engineering: A, vol.420, issue.1-2, pp.1-7, 2006.
DOI : 10.1016/j.msea.2005.12.037

W. Ludwig, E. Boller, C. Bellet, and C. Josserond, X-ray micro-tomography an attractive characterisation technique in materials science, Nuclear instruments and methods in physics research section B: Beam interactions with materials and atoms, pp.273-286, 2003.

N. S. Tiedje, J. Taylor, and M. A. Easton, Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification, Metallurgical and Materials Transactions A, vol.24, issue.1???2, 2012.
DOI : 10.1007/BF02659138

A. Tronche, Investigation and modelling of inoculation of aluminium by TiC, 2001.

V. Vand, Viscosity of Solutions and Suspensions. I. Theory, The Journal of Physical and Colloid Chemistry, vol.52, issue.2, pp.277-299, 1948.
DOI : 10.1021/j150458a001

V. Voller and . Sundarraj, A model of inverse segregation: the role of microporosity, International Journal of Heat and Mass Transfer, vol.38, issue.6, pp.1009-1018, 1995.
DOI : 10.1016/0017-9310(94)00221-G

C. J. Vreeman and F. P. Incropera, The effect of free-floating dendrites and convection on macrosegregation in direct chill cast aluminum alloys, International Journal of Heat and Mass Transfer, vol.43, issue.5, pp.687-704, 2000.
DOI : 10.1016/S0017-9310(99)00175-1

C. J. Vreeman, M. J. Krane, and F. P. Incropera, The effect of free-floating dendrites and convection on macrosegregation in direct chill cast aluminum alloys, International Journal of Heat and Mass Transfer, vol.43, issue.5, pp.677-686, 2000.
DOI : 10.1016/S0017-9310(99)00174-X

C. J. Vreeman, J. D. Schloz, and M. J. Krane, Direct Chill Casting of Aluminum Alloys: Modeling and Experiments on Industrial Scale Ingots, Journal of Heat Transfer, vol.36, issue.5, p.947, 2002.
DOI : 10.1080/10407788808913614

D. C. Weckman and P. Niessen, A numerical simulation of the D.C. continuous casting process including nucleate boiling heat transfer, Metallurgical Transactions B, vol.62, issue.pt. 8, pp.593-602, 1982.
DOI : 10.1016/B978-0-12-395635-4.50008-5

L. Yao, S. Cockcroft, C. Reilly, and J. Zhu, Factors Affecting the Nucleation Kinetics of Microporosity Formation in Aluminum Alloy A356, Metallurgical and Materials Transactions A, vol.26, issue.3, pp.1004-1016, 2012.
DOI : 10.1179/174328409X425227

L. Yao, S. Cockcroft, J. Zhu, and C. Reilly, Modeling of Microporosity Size Distribution in Aluminum Alloy A356, Metallurgical and Materials Transactions A, vol.37, issue.2, pp.4137-4148, 2011.
DOI : 10.1007/s11661-006-0080-4

G. H. Yeoh and J. Tu, Computational techniques for multiphase flows, 2009.

M. Zalo?nik, Modeling of Macrosegregation in Direct Chill Casting, 2006.

M. Zalo?nik and H. Combeau, An operator splitting scheme for coupling macroscopic transport and grain growth in a two-phase multiscale solidification model: Part I ??? Model and solution scheme, Computational Materials Science, vol.48, issue.1, pp.1-10, 2010.
DOI : 10.1016/j.commatsci.2009.04.036

L. Zhang, D. G. Eskin, . Miroux, T. Subroto, and L. Katgerman, Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: experiments and computer modelling, IOP Conf. Ser. Mater. Sci. Eng, p.12019, 2012.
DOI : 10.1088/1757-899X/33/1/012019