T. Zhu, Y. Lin, Y. Luo, X. Hu, W. Lin et al., Preparation and characterization of TiO2-regenerated cellulose inorganic???polymer hybrid membranes for dehydration of caprolactam, Carbohydrate Polymers, vol.87, issue.1, pp.901-909, 2012.
DOI : 10.1016/j.carbpol.2011.08.088

J. Lee and J. Y. Jho, Fabrication of highly ordered and vertically oriented TiO 2 nanotube arrays for ordered heterojunction polymer/inorganic hybrid solar cell, Solar Energy Materials and Solar Cells, vol.95, issue.11, pp.3152-3156, 2011.

M. L. Dias, R. M. Fernandes, R. H. Cunha, S. Jaconis, and A. C. Silvino, Highly filled clay polypropylene nanocomposites prepared by in situ polymerization with clay-supported magnesium/titanium catalysts, Applied Catalysis A: General, vol.403, pp.1-2, 2011.
DOI : 10.1016/j.apcata.2011.06.012

Y. Huang, Y. Ye, Y. Syu, B. Hwang, and F. Chang, Synthesis and characterization of sulfonated polytriazole-clay proton exchange membrane by in situ polymerization and click reaction for direct methanol fuel cells, Journal of Power Sources, vol.208, pp.144-152, 2012.
DOI : 10.1016/j.jpowsour.2012.02.007

Y. Ye, Y. Yen, C. Cheng, Y. Syu, Y. Huang et al., Polytriazole/clay nanocomposites synthesized using in situ polymerization and click chemistry, Polymer, vol.51, issue.2, pp.430-436, 2010.
DOI : 10.1016/j.polymer.2009.11.015

Z. Shen, G. P. Simon, and Y. Cheng, Comparison of solution intercalation and melt intercalation of polymer???clay nanocomposites, Polymer, vol.43, issue.15, pp.4251-4260, 2002.
DOI : 10.1016/S0032-3861(02)00230-6

X. Xu, Y. Ding, Z. Qian, F. Wang, B. Wen et al., Degradation of poly(ethylene terephthalate)/clay nanocomposites during melt extrusion: Effect of clay catalysis and chain extension, Polymer Degradation and Stability, vol.94, issue.1, pp.113-123, 2009.
DOI : 10.1016/j.polymdegradstab.2008.09.009

M. Abdel-goad, Rheological characterization of melt compounded polypropylene/clay nanocomposites, Composites Part B: Engineering, vol.42, issue.5, pp.1044-1047, 2011.
DOI : 10.1016/j.compositesb.2011.03.025

G. Liu, C. Fan, J. Zhong, L. Zhang, S. Ding et al., Using hexadecyl trimethyl ammonium bromide (CTAB) modified clays to clean the Microcystis aeruginosa blooms in Lake Taihu, China, Harmful Algae, vol.9, issue.4, pp.413-418, 2010.
DOI : 10.1016/j.hal.2010.02.004

A. Gürses, S. Karaca, F. Aksakal, and M. Açikyildiz, Monomer and micellar adsorptions of CTAB onto the clay/water interface, Desalination, vol.264, issue.1-2, pp.1-2, 2010.
DOI : 10.1016/j.desal.2010.07.022

H. Carrero and L. E. León, Electrochemically active films of negatively charged molecules, surfactant and synthetic clays, Electrochemistry Communications, vol.3, issue.8, pp.417-420, 2001.
DOI : 10.1016/S1388-2481(01)00191-6

I. Ghorbel-abid, K. Galai, and M. Trabelsi-ayadi, Retention of chromium (III) and cadmium (II) from aqueous solution by illitic clay as a low-cost adsorbent, Desalination, vol.256, issue.1-3, pp.1-3, 2010.
DOI : 10.1016/j.desal.2009.06.079

P. Antonina, . Kryvoruchko, D. Irina, Y. Atamanenko, and . Yurlova, Concentration/purification of Co(II) ions by reverse osmosis and ultrafiltration combined with sorption on clay mineral montmorillonite and cation-exchange resin KU-2-8n, Journal of Membrane Science, vol.228, issue.1, pp.77-81, 2004.

M. Addy, B. Losey, R. Mohseni, E. Zlotnikov, and A. Vasiliev, Adsorption of heavy metal ions on mesoporous silica-modified montmorillonite containing a grafted chelate ligand, Applied Clay Science, vol.59, issue.60, pp.59-60, 2012.
DOI : 10.1016/j.clay.2012.02.012

R. Say, E. Birlik, A. Denizli, and A. Ersöz, Removal of heavy metal ions by dithiocarbamate-anchored polymer/organosmectite composites, Applied Clay Science, vol.31, issue.3-4, pp.3-4, 2006.
DOI : 10.1016/j.clay.2005.10.006

A. Khan, A. M. Asiri, M. A. Rub, N. Azum, A. Aslam-parwaz-khan et al., Synthesis, characterization of silver nanoparticle embedded polyaniline tungstophosphate-nanocomposite cation exchanger and its application for heavy metal selective membrane, Composites Part B: Engineering, vol.45, issue.1, pp.1486-1492, 2013.
DOI : 10.1016/j.compositesb.2012.09.023

S. Laribi, J. Fleureau, J. L. Grossiord, and N. Kbir-ariguib, Comparative yield stress determination for pure and interstratified smectite clays, Rheologica Acta, vol.81, issue.3, pp.262-269, 2005.
DOI : 10.1051/rphysap:01987002204024100

URL : https://hal.archives-ouvertes.fr/hal-00019071

A. Besq, Ecoulements laminaires de suspensions de bentonite industrielles. Caractérisation rhéométrique -Ecoulements en conduites axisymétriques. Applications aux activités du Génie Civil, Thèse de doctorat de l'Université de Poitiers, 2000.

Z. Adamis and R. B. Williams, Bentonite, kaolin, and selected clay minerals, Environmental Health Criteria 231, World Health Organization Geneva, 2005.

W. C. Röntgen, Über Eine Neue Art Von Strahlen, Sitzungsberichte Der Physikalisch- Medizinischen Gesellschaft W?rzburg, p.137, 1895.

L. Pauling, The structure of mica and related materials, Proceedings of the National Academy of Sciences, p.123, 1930.

L. Pauling, THE STRUCTURE OF THE CHLORITES, Proceedings of the National Academy of Sciences, p.578, 1930.
DOI : 10.1073/pnas.16.9.578

S. Cailleres and S. Henin, Genèse et Synthese des Argiles, C.R. Colloque int. C.N.R.S, issue.105, p.31, 1961.

L. Pluart and L. , Nanocomposites Epoxyde/amine/montmorillonite : Rôle des interactions sur la formation, la morphologie aux différents niveaux d'échelle et les propriétés mécaniques des réseaux, Thèse de doctorat de L'Institut National des Sciences Appliquées de Lyon, 2002.

E. Eslinger and D. Peaver, Clay minerals for petroleum geologist and engineers, SEPM Short course Notes N° 22. Soc. Economic paleontologists and mineralogists, 1988.

F. Bergaya, B. K. Theng, and G. Lagaly, Developments in Clay Science 1, Handbook of Clay Science, 2006.

Y. Deng, G. N. White, and J. Dixon, Effect of Structural Stress on the Intercalation Rate of Kaolinite, Journal of Colloid and Interface Science, vol.250, issue.2, pp.379-393, 2002.
DOI : 10.1006/jcis.2001.8208

C. Chiu and J. Lin, Self-assembly behavior of polymer-assisted clays, Progress in Polymer Science, vol.37, issue.3, pp.406-444, 2012.
DOI : 10.1016/j.progpolymsci.2011.07.007

A. Ruellan and J. Deletang, Les phénomènes d'échange de cations et d'anions dans les sols, 1997.

J. Mering, gonfmement, dispersion et hydratation des argiles, Ints-Nations, de recherche chimiques appliquée, France, bull, Gr. Fr. Argiles, vol.115, p.14, 1978.

F. Wypych and K. Gundappa-satyanarayana, Clay Surfaces Fundamentals and Applications, 2004.

J. Ravichandran and B. Sivasankar, clays and clays minerals, pp.854-858, 1997.

H. H. Murray, Applied clay mineralogy: Occurrences, Processing and Application of Kaolins, 2007.

L. Rebiai, Etude thermodynamique de matériaux frittes a base du kaolin Tamazert, Thèse de magister, 2006.

J. Yuan, W. L. Garforth, and R. J. Pruett, Influence of dispersants on the solubility of calcined kaolin, Applied Clay Science, vol.13, issue.2, pp.137-147, 1998.
DOI : 10.1016/S0169-1317(98)00016-7

W. M. Bundy, The diverse industrial applications of kaolin, pp.43-74, 1993.

H. H. Murray, Applied clay mineralogy today and tomorrow, Clay Minerals, vol.34, issue.1, pp.39-49, 1999.
DOI : 10.1180/000985599546055

M. A. Zenasni, S. Benfarhi, and B. Meroufel, Effect of the Degree of Ionization on the Insertion of Polyvinylpyridinium Salts into Bentonite, International Journal of Inorganic Chemistry, vol.265, issue.9, 2011.
DOI : 10.1021/cm010305s

L. I. Aimin, X. Minjuan, L. Wenhui, W. Xuejun, and D. Jingyu, Adsorption characterizationsof fulvic acid fractions onto kaolinite, Journal of Environmental Sciences, vol.20, 2008.

O. Bouras, Propriétés adsorbantes des argiles pontées organophiles : synthèse et caractérisation, Thèse de doctorat, 2003.

X. Zhang, H. Hong, Z. Li, J. Guand, and L. Schulz, Removal of azobenzene from water by kaolinite, Journal of Hazardous Materials, vol.170, issue.2-3, 2009.
DOI : 10.1016/j.jhazmat.2009.05.073

M. Dysli, géologie appliqueé à l'ingénierie et à l'environnement B2-2 : Mécanique des sols, école polytechnique fédérale de Lausanne, p.3, 2003.

S. Bendou, utilisation des argiles pour la décoloration des bains de teinture, 2009.

L. I. Aimin, X. U. Minjuan, L. I. Wenhui, W. Xuejun, and D. Jingyu, Adsorption characterizations of fulvic acid fractions onto kaolinite, Journal of Environmental Sciences, issue.20, 2008.

M. L. Granizo, M. T. Varela, and S. Martinez-ramirez, Alkali activation of metakaolins: parameters affecting mechanical, structural and microstructural properties, Journal of Materials Science, vol.26, issue.7, pp.2934-2977, 2007.
DOI : 10.1016/j.colsurfa.2005.06.060

A. G. Cristobal, Zeolites prepared from calcined and mechanically modified kaolinsA comparative study, Applied Clay Science, vol.49, issue.3, pp.239-285, 2010.
DOI : 10.1016/j.clay.2010.05.012

E. Galan, Applied Clay Science, pp.477-90, 1996.

J. G. Jaarsveld, J. S. Deventer, and G. C. Lukey, The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers, Chemical Engineering Journal, vol.89, issue.1-3, pp.63-73, 2002.
DOI : 10.1016/S1385-8947(02)00025-6

G. Ekosse, The Makoro kaolin deposit, southeastern Botswana: its genesis and possible industrial applications, Applied Clay Science, vol.16, issue.5-6, pp.301-320, 2000.
DOI : 10.1016/S0169-1317(99)00059-9

B. G. Sharp-j, . H. Patterson-j, and . N. And-narahari-achar-b, Kinetics and mechenism of dehydroxylation processes, I. Temperature and vapor pressure dependance of dehydroxylation of kaolinite, The American Mineralogist, pp.52-201, 1967.

A. Astruc, E. Joliff, J. Chailan, E. Aragon, C. O. Petter et al., Incorporation of kaolin fillers into an epoxy/polyamidoamine matrix for coatings, Progress in Organic Coatings, pp.65-158, 2009.
DOI : 10.1016/j.porgcoat.2008.11.003

URL : https://hal.archives-ouvertes.fr/hal-01361810

A. Charfi, R. Dhouib-sahnoun, and J. Bouaziz, Characterization and mechanical properties of phosphate-kaolin clay, Powder Technology, vol.235, pp.633-639, 2013.
DOI : 10.1016/j.powtec.2012.11.021

N. Saikia, P. Sengupta, P. Kumar-gogoi, P. Ch, and . Borthakur, Kinetics of dehydroxylation of kaolin in presence of oil field effluent treatment plant sludge, Applied Clay Science, vol.22, issue.3, pp.93-102, 2002.
DOI : 10.1016/S0169-1317(02)00130-8

B. Fayza, Elimination des polluants organiques par des argiles naturelles et modifiées Diplôme de Magister, Spécialité: Chimie, Option: Chimie Inorganique et Environnement, 2012.

K. Salim, Etude Expérimentale des mélanges sable bentonite Thèse Présentée pour l'Obtention du diplôme de Doctorat d'Etat en Génie Civil, Option : Géotechnique Environnementale, 2007.

L. Pluart and L. , Nanocomposites Epoxyde/amine/montmorillonite : Rôle des interactions sur la formation, la morphologie aux différents niveaux d'échelle et les propriétés mécaniques des réseaux, Thèse de doctorat de L'Institut National des Sciences Appliquées de Lyon, 2002.

C. Wilkie, A. J. Zhu, and F. Uhl, How do nanocomposites enhance the thermal stability of polymers? Polymre perprint, p.42, 2001.

T. J. Pinnavaia, T. Lan, P. D. Karivatna, Z. Wang, and H. Shi, clay-reiforced epoxy nanocomposites :Synthesis, properties and mechanism of formation, ACS Polymeric Materials: Science and Engineering, pp.74-117, 1996.

C. Zilg, R. Muelhaupt, and J. Finter, Morphology and toughness/ stiffness balance of nanocomposites based upon anhydride cured epoxy resins and layered sillicates, Macromolecular Chemistry and Physics, pp.200-661, 1999.

M. Déribère and . La-bentonite, Les argiles colloïdales et leurs emplois, Edit: Dunod, 1943.

A. Weiss, Organic derivatives of mica-type layer silicates, Angewandte Chemistry International Edition, pp.134-143, 1963.

T. Lan, P. D. Kaniration, and . Pinnavau, Mechanism of Clay Tactoid Exfoliation in Epoxy-Clay Nanocomposites, Chemistry of Materials, vol.7, issue.11, pp.2144-2150, 1995.
DOI : 10.1021/cm00059a023

C. Pereira, S. Patrício, A. R. Silva, A. L. Magalhães, A. P. Carvalho et al., Copper acetylacetonate anchored onto aminefunctionalised clays, Journal of Colloid and Interface Science, pp.316-570, 2007.
DOI : 10.1016/j.jcis.2007.07.053

A. Xue, S. Zhou, Y. Zhao, X. Lu, and P. Han, Adsorption of reactive dyes from aqueous solution by silylated palygorskite, Applied Clay Science, vol.48, issue.4, pp.638-640, 2010.
DOI : 10.1016/j.clay.2010.03.011

A. Khenifi, B. Zohra, B. Kahina, H. Houari, and D. Zoubir, Removal of 2,4-DCP from wastewater by CTAB/bentonite using one-step and two-step methods: A comparative study, Chemical Engineering Journal, vol.146, issue.3, pp.345-354, 2009.
DOI : 10.1016/j.cej.2008.06.028

F. Hala, M. S. Naguib, . Aziz, M. Sherif, G. R. Sherif et al., Thermal properties of biodegradable poly(PHB/PCL-PEG-PCL) urethanes nanocomposites using clay/poly(?-caprolactone) nanohybrid based masterbatch, Applied Clay Science, vol.57, pp.55-63, 2012.

M. Addy, B. Losey, R. Mohseni, E. Zlotnikov, and A. Vasiliev, Adsorption of heavy metal ions on mesoporous silica-modified montmorillonite containing a grafted chelate ligand, Applied Clay Science, vol.59, issue.60, pp.59-60, 2012.
DOI : 10.1016/j.clay.2012.02.012

J. Zhu, P. Yuan, H. He, R. Frost, Q. Tao et al., In situ synthesis of surfactant/silane-modified hydrotalcites, Journal of Colloid and Interface Science, vol.319, issue.2, pp.319-498, 2008.
DOI : 10.1016/j.jcis.2007.11.037

C. Pereira, S. Patrício, A. R. Silva, A. L. Magalhães, A. P. Carvalho et al., Copper acetylacetonate anchored onto aminefunctionalised clays, Journal of Colloid and Interface Science, pp.316-570, 2007.
DOI : 10.1016/j.jcis.2007.07.053

A. Xue, S. Zhou, Y. Zhao, X. Lu, and P. Han, Effective NH2-grafting on attapulgite surfaces for adsorption of reactive dyes, Journal of Hazardous Materials, vol.194, pp.7-14, 2011.
DOI : 10.1016/j.jhazmat.2011.06.018

A. Blumstein, Etude des polymerization en couche adsorbée, Bulletin de la Societe Chimique, pp.899-905, 1961.

M. Sumita, T. Shizuma, K. Miyasaka, and K. Ishikawa, Effect of reducible properties of temperature, rate of strain, and filler content on the tensile yield stress of nylon 6 composites filled with ultrafine particles, Journal of Macromolecular Science, Part B, vol.8, issue.2, pp.601-619, 1983.
DOI : 10.1002/app.1976.070200226

A. Benmabrouk, Elaboration de nanocomposites a base de whiskers cellulose et de polymère acrylique par polymérisation in situ, Doctorat de l'université de Grenoble Spécialité : IMEP2/ Mécanique des fluides, procédés, Énergétique, Et en cotutel avec l'université de Sfax Spécialité : Chimie, 2011.

J. Berthelot, Comportement mécanique et analyse des structures. 5 e édition, Matériaux composites, 2012.

S. S. Ray and M. Bousmina, Polymer Nanocomposites and Their Applications, 2006.

F. Hussain, M. Hojjati, M. Okamoto, and R. Gorga, Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview, Journal of Composite Materials, vol.14, issue.1, pp.1511-1575, 2006.
DOI : 10.1016/j.carbon.2005.12.023

L. Flandin, G. Bidan, and Y. Brechet, New nanocomposite materials made of an insulating matrix and conducting fillers: Processing and properties, Polymer Composites, vol.34, issue.1, pp.165-174, 2000.
DOI : 10.1023/A:1004546806226

URL : https://hal.archives-ouvertes.fr/hal-00309607

M. Alexandre and P. Dbois, Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials, Materials Science and Engineering: R: Reports, vol.28, issue.1-2, pp.1-63, 2000.
DOI : 10.1016/S0927-796X(00)00012-7

K. Yano, A. Usuki, and A. Okada, Synthesis and properties of polyimide???clay hybrid, Journal of Polymer Science Part A: Polymer Chemistry, vol.31, issue.10, pp.31-2493, 1993.
DOI : 10.1002/pola.1993.080311009

P. B. Miessersmith and E. P. Giannelis, Synthesis and barrier properties of poly(??-caprolactone)-layered silicate nanocomposites, Journal of Polymer Science Part A: Polymer Chemistry, vol.33, issue.7, pp.1047-1057, 1995.
DOI : 10.1002/pola.1995.080330707

C. Thuc, A. Grillet, L. Reinert, F. Ohashi, H. Ha-thuc et al., Separation and purification of montmorillonite and polyethylene oxide modified montmorillonite from Vietnamese bentonites, Applied Clay Science, vol.49, issue.3, pp.229-238, 2010.
DOI : 10.1016/j.clay.2010.05.011

T. Kuila, H. Acharya, S. K. Srivastava, B. K. Samantaray, and S. Kureti, Enhancing the ionic conductivity of PEO based plasticized composite polymer electrolyte by LaMnO 3 nanofiller, Materials Science and Engineering: B, vol.137, pp.1-3, 2007.

M. Szczerba, J. ?rodo?, M. Skiba, and A. Derkowski, One-dimensional structure of exfoliated polymer-layered silicate nanocomposites: A polyvinylpyrrolidone (PVP) case study, Applied Clay Science, vol.47, issue.3-4, pp.3-4, 2010.
DOI : 10.1016/j.clay.2009.10.015

X. Ma, Effect of a low-molecular-weight polyacrylic acid on the coagulation of kaolinite particles, International Journal of Mineral Processing, vol.99, issue.1-4, pp.17-20, 2011.
DOI : 10.1016/j.minpro.2011.01.002

R. A. Vaia, H. Ishii, and E. P. Giannelis, Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates, Chemistry of Materials, vol.5, issue.12, p.1694, 1993.
DOI : 10.1021/cm00036a004

M. Kato, A. Usuki, and A. Okada, Synthesis of polypropylene oligomer?clay intercalation compounds, Journal of Applied Polymer Science, vol.66, issue.9, p.1781, 1997.
DOI : 10.1002/(SICI)1097-4628(19971128)66:9<1781::AID-APP17>3.0.CO;2-Y

P. Svoboda, C. Zeng, H. Wang, L. J. Lee, and D. L. Tomasko, Morphology and mechanical properties of polypropylene/organoclay nanocomposites, Journal of Applied Polymer Science, vol.35, issue.7, p.1562, 2002.
DOI : 10.1080/00222349608220392

M. Laus, O. Francesangeli, and F. Sandrolini, New hybrid nanocomposites based on an organophilic clay and poly(styrene-b-butadiene) copolymers, Journal of Materials Research, vol.3, issue.11, p.3134, 1997.
DOI : 10.1557/JMR.1997.0409

S. D. Burnside and E. P. Giannelis, Synthesis and properties of new poly(dimethylsiloxane) nanocomposites, Chemistry of Materials, vol.7, issue.9, p.1597, 1995.
DOI : 10.1021/cm00057a001

A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima et al., Synthesis of nylon 6-clay hybrid, Journal of Materials Research, vol.3, issue.05, p.1179, 1993.
DOI : 10.1002/pol.1958.1203012108

P. B. Messersmith and E. P. Giannelis, Synthesis and barrier properties of poly(??-caprolactone)-layered silicate nanocomposites, Journal of Polymer Science Part A: Polymer Chemistry, vol.33, issue.7, p.1047, 1995.
DOI : 10.1002/pola.1995.080330707

P. B. Messersmith and E. P. Giannelis, Polymer-layered silicate nanocomposites: in situ intercalative polymerization of .epsilon.-caprolactone in layered silicates, Chemistry of Materials, vol.5, issue.8, p.1064, 1993.
DOI : 10.1021/cm00032a005

J. G. Doh and I. Cho, Synthesis and properties of polystyrene-organoammonium montmorillonite hybrid, Polymer Bulletin, vol.41, issue.5, p.511, 1998.
DOI : 10.1007/s002890050395

M. W. Weimer, H. Chen, E. P. Giannelis, and D. Sogah, Direct Synthesis of Dispersed Nanocomposites by in Situ Living Free Radical Polymerization Using a Silicate-Anchored Initiator, Journal of the American Chemical Society, vol.121, issue.7, p.1615, 1999.
DOI : 10.1021/ja983751y

S. A. Solin, Novel properties of intercalated layered solids: from graphite to sheet silicates, Journal of Molecular Catalysis, vol.27, issue.1-2, pp.293-303, 1984.
DOI : 10.1016/0304-5102(84)85087-7

J. Rouxel, Chalcog??nures lamellaires et intercalaires alcalins, Materials Science and Engineering, vol.31, pp.31-277, 1977.
DOI : 10.1016/0025-5416(77)90046-5

M. Bougouma, A. Batan, B. Guel, T. Segato, J. B. Legma et al., Growth and characterization of large, high quality MoSe 2 single crystals, Journal of Crystal Growth, 2012.

L. Mehaute and A. , Structure et reversibilite electrochimique des materiaux a intercalation d'alcalin susceptibles d'etre reduits en milieux non aqueux, Journal of Power Sources, vol.9, issue.2, pp.167-183, 1983.
DOI : 10.1016/0378-7753(83)80031-7

G. Mercouri, H. O. Kanatzidis, W. J. Marcy, C. R. Mccarthy, T. J. Kannewurf et al., In situ intercalative polymerization chemistry of FeOCl. Generation and properties of novel, highly conductive inorganic/organic polymer microlaminates. Solid State Ionics, pp.32-33, 1989.

M. S. Al-assiri, M. M. El-desoky, A. Alyamani, A. Hajry, A. Al-mogeeth et al., Spectroscopic study of nanocrystalline V2O5??nH2O films doped with Li ions, Optics & Laser Technology, vol.42, issue.6, pp.994-1003, 2010.
DOI : 10.1016/j.optlastec.2010.01.020

J. Livage, Synthesis of polyoxovanadates via " chimie douce " . Coordination Chemistry Reviews, pp.999-1018, 1998.

A. I. Gavrilyuk and M. M. Afanasiev, ESR study of photoinjection of hydrogen in nanostructured MoO3 thin films, Solar Energy Materials and Solar Cells, vol.93, issue.2, pp.280-288, 2009.
DOI : 10.1016/j.solmat.2008.10.024

N. Ballav and M. Biswas, Conductive composites of polyaniline and polypyrrole with MoO3, Materials Letters, vol.60, issue.4, pp.514-517, 2006.
DOI : 10.1016/j.matlet.2005.09.026

P. Fu, J. Guangming-chen-liu, and . Yang, An intercalated hybrid of polyacrylamide/layered double hydroxide prepared via in situ intercalative polymerization, Materials Letters, vol.63, issue.20, pp.1725-1728, 2009.
DOI : 10.1016/j.matlet.2009.05.023

G. Ma, H. Peng, J. Mu, H. Huang, X. Zhou et al., In situ intercalative polymerization of pyrrole in graphene analogue of MoS 2 as advanced electrode material in supercapacitor, Journal of Power Sources, 2012.

G. Inzelt and A. Róka, Preparation and electrochemical nanogravimetric study on the ruthenium(III) trichloride-polypyrrole nanocomposite, Electrochimica Acta, vol.53, issue.11, pp.3932-3941, 2008.
DOI : 10.1016/j.electacta.2007.06.014

L. Coche and J. Moutet, Etude de la polymerisation electrochimique de triphenylamines substituees par le groupe hydroxy-1 ethyle. Preparation d'electrodes modifiees par des films de polymeres redox, Electrochimica Acta, vol.30, issue.8, pp.1063-1070, 1985.
DOI : 10.1016/0013-4686(85)80173-0

A. Akbar-entezami, R. Mechin, F. Schué, A. Collet, and B. Kaempf, Polym??risation en ??mulsion des cis et trans pentadienes-1,3 amorcee par le chlorure de rhodium (III), European Polymer Journal, vol.13, issue.3, pp.193-201, 1977.
DOI : 10.1016/0014-3057(77)90115-X

B. Ndlovu, M. Becker, E. Forbes, and D. Deglon, The influence of phyllosilicate mineralogy on the rheology of mineral slurries, Minerals Engineering, vol.24, issue.12, pp.1314-1322, 2011.
DOI : 10.1016/j.mineng.2011.05.008

A. Loaiza-gil, J. Arenas, M. Villarroel, F. Imbert, H. Del-castillo et al., Heavier alcohols synthesis on cobalt phyllosilicate catalysts, Journal of Molecular Catalysis A: Chemical, vol.228, issue.1-2, pp.1-2, 2005.
DOI : 10.1016/j.molcata.2004.09.071

B. K. Theng, Polymer???Clay Nanocomposites, Developments in Clay Science, vol.4, pp.201-241, 2012.
DOI : 10.1016/B978-0-444-53354-8.00007-4

C. Sanchez, B. Julian, P. Belleville, and M. Popall, Applications of hybrid organic???inorganic nanocomposites, Journal of Materials Chemistry, vol.40, issue.January 22, pp.35-36, 2005.
DOI : 10.1016/j.msec.2003.09.148

URL : https://hal.archives-ouvertes.fr/hal-00022857

G. Kickelbick, Hybrid materials: synthesis, characterization, and applications, Wileyvch Weinheim, Germany, 2007.
DOI : 10.1002/9783527610495

U. Schulz, U. B. Schallenberg, and N. Kaiser, Antireflection coating design for plastic optics, Applied Optics, vol.41, issue.16, pp.3107-3110, 2002.
DOI : 10.1364/AO.41.003107

C. Edser, Auto applications drive commercialization of nanocomposites, Plastics Additives and Compounding, pp.30-33, 2002.

A. Smith, Nanotechnology-does it have a sporting chance? Chemistry in New Zealand, pp.8-9, 2006.

K. Nakamura, Laminate structure excelling in fuel permeation preventing performance, EP Patent, vol.1, pp.574-330, 2005.

H. Fischer, Polymer nanocomposites: from fundamental research to specific applications, Materials Science and Engineering: C, vol.23, issue.6-8, pp.763-772, 2003.
DOI : 10.1016/j.msec.2003.09.148

D. Porter, E. Metcalfe, and M. Thomas, Nanocomposite fire retardants ? a review, Fire and Materials, vol.31, issue.1, pp.45-52, 2000.
DOI : 10.1021/ma971308m

M. B. Bryning, M. F. Islam, J. M. Kikkawa, and A. G. Yodh, Very Low Conductivity Threshold in Bulk Isotropic Single-Walled Carbon Nanotube-Epoxy Composites, Advanced Materials, vol.350, issue.9, pp.1186-1191, 2005.
DOI : 10.1051/jphys:0199000510220250500

M. Moniruzzaman and K. I. Winey, Polymer Nanocomposites Containing Carbon Nanotubes, Macromolecules, vol.39, issue.16, pp.5194-5205, 2006.
DOI : 10.1021/ma060733p

C. Sanchez and F. Babonneau, Matériaux hybrides, observatoire français des techniques avancées, arago, p.17, 1996.

D. Avnir, T. Coradin, O. Lev, and J. Livage, Recent bio-applications of sol???gel materials, J. Mater. Chem., vol.15, issue.11, pp.1013-1030, 2005.
DOI : 10.1021/cm030254u

URL : https://hal.archives-ouvertes.fr/hal-00080365

J. Livage, T. Coradin, and C. Roux, Encapsulation of biomolecules in silica gels, Journal of Physics: Condensed Matter, vol.13, issue.33, p.13, 2001.
DOI : 10.1088/0953-8984/13/33/202

E. Ruiz-hitzky, M. Darder, and P. Aranda, Functional biopolymer nanocomposites based on layered solids, Journal of Materials Chemistry, vol.24, issue.95, pp.35-36, 2005.
DOI : 10.1039/b505640n

A. U. Daniels, M. K. Chang, K. P. Andriano, and J. Heller, Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone, Journal of Applied Biomaterials, vol.22, issue.1, pp.57-78, 1990.
DOI : 10.1097/00003086-197011000-00023

Q. Le-masne-de-chermont, C. Chanéac, J. Seguin, F. Pellé, S. Matrejean et al., Nanoprobes with near-infrared persistent luminescence for in vivo imaging, Proceedings of the National Academy of Sciences, p.9266, 2007.
DOI : 10.1002/pola.10049

A. Khenifi, B. Zohra, B. Kahina, H. Houari, and D. Zoubir, Removal of 2,4-DCP from wastewater by CTAB/bentonite using one-step and two-step methods: A comparative study, Chemical Engineering Journal, vol.146, issue.3, pp.345-354, 2009.
DOI : 10.1016/j.cej.2008.06.028

F. Hala, M. S. Naguib, . Aziz, M. Sherif, G. R. Sherif et al., Thermal properties of biodegradable poly(PHB/PCL-PEG-PCL) urethanes nanocomposites using clay/poly(?-caprolactone) nanohybrid based masterbatch, Applied Clay Science, vol.57, pp.55-63, 2012.

J. Matusik, E. Stodolak, and K. Bahranowski, Synthesis of polylactide/clay composites using structurally different kaolinites and kaolinite nanotubes, Applied Clay Science, vol.51, issue.1-2, pp.102-109, 2011.
DOI : 10.1016/j.clay.2010.11.010

M. Ragoubi, Contribution à l'amélioration de la compatibilité interfaciale fibres naturelles/matrice thermoplastique via un traitement sous décharge couronne. Doctorat, Spécialité « Sciences pour l'ingénieur mention Bois et Fibres, Présenté à l'Université Henri Poincaré Nancy 1, 2010.

V. Katiyar, N. Gerds, C. Bender-koch, J. Risbo, H. Christian et al., Poly l-lactide-layered double hydroxide nanocomposites via in situ polymerization of l-lactide, Polymer Degradation and Stability, vol.95, issue.12, pp.95-2563, 2010.
DOI : 10.1016/j.polymdegradstab.2010.07.031

S. Pavlidou and C. D. Papaspyrides, A review on polymer???layered silicate nanocomposites, Progress in Polymer Science, vol.33, issue.12, pp.1119-1198, 2008.
DOI : 10.1016/j.progpolymsci.2008.07.008

P. Zhang, J. M. Ruan, and L. Y. Zhou, Preparation of monomer of degradable biomaterial poly(L-lactide), Journal of Central South University of Technology, vol.36, issue.6, pp.246-250, 2005.
DOI : 10.1007/s11771-005-0136-4

L. Ping and L. V. Jia, Study on Synthesis and Mechanism of Melt Polymerization of, Llactic Acid. Journal of Fiber Bioengineering and Informatics, vol.1, pp.41-46, 2008.

M. M. Coleman and E. J. Moskala, Mechanical and microstructural properties of pectin/starch films, Polymer, pp.24-663, 1983.

D. J. Dimitri, N. Rousseaux, A. Sallem-idrissi, J. Baudouin, P. Devaux et al., Waterassisted extrusion of polypropylene/clay nanocomposites: A comprehensive study, Polymer, pp.52-443, 2011.

S. Labidi, N. Azema, D. Perrin, and J. Lopez-cuesta, Organomodified montmorillonite/poly(3-caprolactone) nanocomposites prepared by melt intercalation in a twin-screw extruder, Polymer Degradation and Stability, pp.95-382, 2010.

L. Jiang, J. Zhang, and M. P. Wolcott, Comparison of polylactide/nano-sized calcium carbonate and polylactide/montmorillonite composites: Reinforcing effects and toughening mechanisms, Polymer, vol.48, issue.26, pp.48-7632, 2007.
DOI : 10.1016/j.polymer.2007.11.001

M. Sauceaua, J. Fagesa, A. Commona, C. Nikitinea, and E. Rodier, New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxide, Progress in Polymer Science, vol.36, issue.6, pp.749-766, 2011.
DOI : 10.1016/j.progpolymsci.2010.12.004

B. S. Ndazi and S. Karlsson, Characterization of hydrolytic degradation of polylactic acid/rice hulls composites in water at different temperatures, Express Polymer Letters, vol.5, issue.2, pp.119-131, 2011.
DOI : 10.3144/expresspolymlett.2011.13

G. G. Sivalingam and . Madras, Thermal Degradation of Ternary Blends of Poly(?caprolactone )/Poly(vinyl acetate)/Poly(vinyl chloride) Department of Chemical Engineering, Indian Institute of Science, 2004.

E. Sykacek, M. Hrabalova, H. Frech, and N. Mundigler, Extrusion of five biopolymers reinforced with increasing wood flour concentration on a production machine, injection moulding and mechanical performance, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1272-1282, 2009.
DOI : 10.1016/j.compositesa.2009.05.023

P. Kumar, K. P. Sandeep, S. Alavi, V. D. Truong, and R. E. Gorga, Preparation and characterization of bio-nanocomposite films based on soy protein isolate and montmorillonite using melt extrusion, Journal of Food Engineering, vol.100, issue.3, pp.480-489, 2010.
DOI : 10.1016/j.jfoodeng.2010.04.035

M. Zenkiewicz, J. Richert, P. Rytlewski, K. Moraczewski, M. Stepczynska et al., Characterisation of multi-extruded poly(lactic acid) Polymer Testing, pp.412-418, 2009.

T. Agustiono, T. Kurniawan, Y. Gilbert, S. Chana, W. H. Loa et al., Physico chemical treatment techniques for wastewater with heavy metals, Chemical Engineering Journal, vol.118, pp.83-98, 2006.

L. K. Wang, D. A. Vaccari, Y. Li, and N. K. Shammas, Chemical precipitation, Physicochemical Treatment Processes, pp.141-198, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00141437

L. Charerntanyarak, Heavy metals removal by chemical coagulation and precipitation, Water Science and Technolgy, pp.135-138, 1999.

W. J. Weber, P. E. Mc-ginlet, and L. Ktz, Sorption phenomena in subsurface systems: Concepts, models and effects on contaminant fate and transport, Water Research, vol.25, issue.5, pp.499-528, 1991.
DOI : 10.1016/0043-1354(91)90125-A

H. Freundlich, Über die adsorption in lösungen, Zeitschrift für Physikalische Chemie (Leipzig), vol.57, pp.385-470, 1906.

S. Mehmet-emin-argun, C. Dursun, M. Ozdemir, and . Karatas, Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics, Journal of Hazardous Materials, vol.141, issue.1, pp.77-85, 2007.
DOI : 10.1016/j.jhazmat.2006.06.095

N. R. Axtell, S. P. Sternberg, and K. Claussen, Lead and nickel removal using Microspora and Lemna minor, Bioresource Technology, vol.89, issue.1, pp.41-48, 2003.
DOI : 10.1016/S0960-8524(03)00034-8

O. Hamdaoui and E. Naffrechoux, Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon, Journal of Hazardous Materials, 2007.

S. E. Chitour, Chimie des surfaces, Introduction à la catalyse, Edition OPU, 1981.

K. Fujiwara, Adsorption of platinum (IV), palladium (II) and gold (III) from aqueous solutions onto l-lysine modified crosslinked chitosan resin, Journal of Hazardous Materials, vol.146, issue.1-2, 2006.
DOI : 10.1016/j.jhazmat.2006.11.049

K. Jr, O. Vinicius-alves-gurgel, L. , J. Cesar-perin-de-melo, V. R. Botaro et al., Adsorption of heavy metal ion from aqueous single metal solution by chemically modified sugarcane bagasse, Bioresource Technology, pp.98-1291, 2007.

K. O. Adebowale, I. E. Unuabonah, and B. Olu-owolabi, The effect of some operating variables on the adsorption of lead and cadmium ions on kaolinite clay, Journal of Hazardous Materials, vol.134, issue.1-3, pp.130-139, 2006.
DOI : 10.1016/j.jhazmat.2005.10.056

K. G. Susmita-sen-gupta and . Bhattacharyya, Immobilization of Pb(II), Cd(II) and Ni(II) ions on kaolinite and montmorillonite surfaces from aqueous medium, Journal of Environmental Management, vol.87, issue.1, pp.46-58, 2008.
DOI : 10.1016/j.jenvman.2007.01.048

D. Tushar-kanti-sen and . Gomez, Adsorption of zinc (Zn 2+ ) from aqueous solution on natural bentonite, Desalination, vol.267, pp.286-294, 2011.

O. Abollino, A. Giacomino, M. Malandrino, and E. Mentasti, Interaction of metal ions with montmorillonite and vermiculite, Applied Clay Science, vol.38, issue.3-4, pp.227-236, 2008.
DOI : 10.1016/j.clay.2007.04.002

Y. Li, B. Xia, Q. Zhao, F. Liu, P. Zhang et al., Removal of copper ions from aqueous solution by calcium alginate immobilized kaolin, Journal of Environmental Sciences, vol.23, issue.3, pp.404-411, 2011.
DOI : 10.1016/S1001-0742(10)60442-1

E. Eren, Removal of copper ions by modified Unye clay, Turkey, Journal of Hazardous Materials, vol.159, issue.2-3, pp.235-244, 2008.
DOI : 10.1016/j.jhazmat.2008.02.035

K. Swayampakula, M. Veera, S. Boddu, K. Kumar-nadavala, and . Abburi, Competitive adsorption of Cu (II), Co (II) and Ni (II) from their binary and tertiary aqueous solutions using chitosan-coated perlite beads as biosorbent, Journal of Hazardous Materials, vol.170, issue.2-3, pp.680-689, 2009.
DOI : 10.1016/j.jhazmat.2009.05.106

S. Chang, Z. Zainal, . Kar-ban, . Tan, W. Nor-azah-yusof et al., Nickel???cobalt oxide/activated carbon composite electrodes for electrochemical capacitors, Current Applied Physics, vol.12, issue.6, pp.1421-1428, 2012.
DOI : 10.1016/j.cap.2012.03.028

S. Haq, C. Winkler, A. Carew, J. Ledieu, and R. Raval, Adsorption and reaction of trans-1,2-dichloroethene on copper nanoclusters supported on thin Al2O3 films, Journal of Catalysis, vol.226, issue.1, pp.1-8, 2004.
DOI : 10.1016/j.jcat.2004.04.036

L. Zhi-rong and Z. Shao-qi, Adsorption of copper and nickel on Na-bentonite, Process Safety and Environmental Protection, vol.88, pp.62-66, 2010.

D. Shu-li, S. Yu-zhuang, Y. Cui-na, and . Xu-bo-hui, Removal of copper from aqueous solutions by bentonites and the factors affecting it, Mining Science and Technology, vol.19, pp.489-0492, 2009.

J. P. Beukes, E. W. Giesekke, and W. Elliott, Nickel retention by goethite and hematite, Minerals Engineering, vol.13, issue.14-15, pp.14-15, 2000.
DOI : 10.1016/S0892-6875(00)00140-0

J. P. Wong, Y. S. Wong, and N. F. Tam, Nickel biosorption by two chlorella species, C. Vulgaris (a commercial species) and C. Miniata (a local isolate) Bioresource Technology, pp.73-133, 2000.
DOI : 10.1016/s0960-8524(99)00175-3

S. Wang, Z. Nan, Y. Li, and Z. Zhao, The chemical bonding of copper ions on kaolin from Suzhou, China, Desalination, vol.249, issue.3, pp.991-995, 2009.
DOI : 10.1016/j.desal.2009.09.017

M. Toor and B. Jin, Adsorption characteristics, isotherm, kinetics, and diffusion of modified natural bentonite for removing diazo dye, Chemical Engineering Journal, vol.187, pp.79-88, 2012.
DOI : 10.1016/j.cej.2012.01.089

S. Kumar, P. Ramalingam, S. Dinesh-kirupha, S. Murugesan, A. Vidhyadevi et al., Adsorption behavior of nickel(II) onto cashew nut shell: Equilibrium, thermodynamics, kinetics, mechanism and process design, Chemical Engineering Journal, vol.167, issue.1, pp.122-131, 2011.
DOI : 10.1016/j.cej.2010.12.010

I. Langmuir, THE ADSORPTION OF GASES ON PLANE SURFACES OF GLASS, MICA AND PLATINUM., Journal of the American Chemical Society, vol.40, issue.9, pp.1361-1403, 1918.
DOI : 10.1021/ja02242a004

H. Freundlich, Über die adsorption in lösungen, Zeitschrift für Physikalische Chemie, vol.57, pp.385-470, 1906.

B. Xing and J. J. Et-pignatello, Dual-Mode Sorption of Low-Polarity Compounds in Glassy Poly(Vinyl Chloride) and Soil Organic Matter, Environmental Science & Technology, vol.31, issue.3, pp.31-792, 1997.
DOI : 10.1021/es960481f

G. Limousin, J. Gaudet, L. Charlet, S. Szenknect, V. Barthes et al., Sorption isotherms: A review on physical bases, modeling and measurement, Applied Geochemistry, vol.22, issue.2, pp.249-275, 2007.
DOI : 10.1016/j.apgeochem.2006.09.010

URL : https://hal.archives-ouvertes.fr/insu-00199618

W. Huang, P. Peng, Z. Yu, and J. Et-fu, Effects of organic matter heterogeneity on sorption and desorption of organic contaminants by soils and sediments, Applied Geochemistry, vol.18, issue.7, pp.955-972, 2003.
DOI : 10.1016/S0883-2927(02)00205-6

M. Kumar and L. Philip, Adsorption and desorption characteristics of hydrophobic pesticide endosulfan in four Indian soils, Chemosphere, vol.62, issue.7, pp.1064-1077, 2006.
DOI : 10.1016/j.chemosphere.2005.05.009

M. Erdemoglu, S. Erdemoglu, F. Say?lkan, M. Akarsu, S. Sener et al., Organo-functional modified pyrophyllite: preparation, characterisation and Pb(II) ion adsorption property, Applied Clay Science, vol.27, issue.1-2, pp.41-52, 2004.
DOI : 10.1016/j.clay.2003.12.005